Biosorption of heavy metals by lyophilized cells of <Emphasis Type="Italic">Pseudomonas stutzeri</Emphasis>

Biosorptive capacity of Pb(II), Cd(II) and Cu(II) by lyophilized cells of Pseudomonas stutzeri was investigated based on Langmuir and Freundlich isotherms. Biosorptive capacity for Pb(II), Cd(II) and Cu(II) decreased with an increase of metal concentration, reaching 142, 43.5 and 36.2 mg/g at initial concentration of 300 mg/l, respectively. Biosorption capacity for metal ions increased with increasing pH. The optimum pH for biosorption rate of Cd(II) and Cu(II) were 5.0, and 6.0 for Pb(II) biosorption. The experimental data showed a better fit with the Langmuir model over the Freundlich model for metal ions throughout the range of initial concentrations. The maximum sorptive capacity (q _max) obtained from the Langmuir equation for Pb(II), Cd(II) and Cu(II) were 153.3 (r ²  = 0.998), 43.86 (r ²  = 0.995), and 33.16 (r ²  = 0.997) for metal ions, respectively. The selectivity order for metal ions towards the biomass of P. stutzeri was Pb(II) > Cd(II) > Cu(II) for a given initial metal ions concentration. The interactions between heavy metals and functional groups on the cell wall surface of bacterial biomass were confirmed by FTIR analysis. The results of this study indicate the possible removal of heavy metals from the environment by using lyophilized cells of P. stutzeri.     

Sorption of Co, Cu, Ni and Zn from industrial effluents by the submerged aquatic macrophyte Myriophyllum spicatum L.

The submerged aquatic plant Myriophyllum spicatum L. (Eurasian water milfoil) has been suggested as an efficient plant species for the treatment of metal-contaminated industrial wastewater. The process of metal removal by plants involves a combination of rapid sorption on the surface and slow accumulation and translocation in the biomass. This study focussed on the sorption/desorption characteristics of the surface of M. spicatum for Co, Cu, Ni and Zn. Batch sorption tests with mixed metal solutions covering a range of 0, 1, 5, 10, 50 and 100 mg l⁻¹ of each metal, were performed. For Co, Ni and Zn, the sorption process was well described by the Langmuir model, whereas sorption of Cu was better described by the Freundlich model. The biomass showed the highest affinity for Cu and Zn. Langmuir sorption maxima of Co, Ni and Zn were 2.3, 3.0 and 6.8 mg g⁻¹ DM, respectively. At the highest initial concentration of 100 mg l⁻¹, a maximum of 29 mg g⁻¹ DM of Cu was sorbed onto the surface of the biomass. Desorption by 0.1 M HCl did not fully recover the metals sorbed onto the surface and there was evidence of leaching from within the biomass. Recovery of heavy metals and regeneration of the biomass by washing with 0.1 M HCl was therefore not suggested as a viable strategy.     

Nickel(II) biosorption by <Emphasis Type="Italic">Rhodotorula glutinis</Emphasis>

The present study reports the feasibility of using Rhodotorula glutinis biomass as an alternative low-cost biosorbent to remove Ni(II) ions from aqueous solutions. Acetone-pretreated R. glutinis cells showed higher Ni(II) biosorption capacity than untreated cells at pH values ranging from 3 to 7.5, with an optimum pH of 7.5. The effects of other relevant environmental parameters, such as initial Ni(II) concentration, shaking contact time and temperature, on Ni(II) biosorption onto acetone-pretreated R. glutinis were evaluated. Significant enhancement of Ni(II) biosorption capacity was observed by increasing initial metal concentration and temperature. Kinetic studies showed that the kinetic data were best described by a pseudo-second-order kinetic model. Among the two-, three-, and four-parameter isotherm models tested, the Fritz-Schluender model exhibited the best fit to experimental data. Thermodynamic parameters (activation energy, and changes in activation enthalpy, activation entropy, and free energy of activation) revealed that the biosorption of Ni(II) ions onto acetone-pretreated R. glutinis biomass is an endothermic and non-spontaneous process, involving chemical sorption with weak interactions between the biosorbent and Ni(II) ions. The high sorption capacity (44.45 mg g⁻¹ at 25°C, and 63.53 mg g⁻¹ at 70°C) exhibited by acetone-pretreated R. glutinis biomass places this biosorbent among the best adsorbents currently available for removal of Ni(II) ions from aqueous effluents.     

Biosorption of Cd(II) and Pb(II) onto brown seaweed, Lobophora variegata (Lamouroux): kinetic and equilibrium studies

The present work deals with the biosorption performance of raw and chemically modified biomass of the brown seaweed Lobophora variegata for removal of Cd(II) and Pb(II) from aqueous solution. The biosorption capacity was significantly altered by pH of the solution delineating that the higher the pH, the higher the Cd(II) and Pb(II) removal. Kinetic and isotherm experiments were carried out at the optimal pH 5.0. The metal removal rates were conspicuously rapid wherein 90% of the total sorption occurred within 90 min. Biomass treated with CaCl₂ demonstrated the highest potential for the sorption of the metal ions with the maximum uptake capacities i.e. 1.71 and 1.79 mmol g⁻¹ for Cd(II) and Pb(II), respectively. Kinetic data were satisfactorily manifested by a pseudo-second order chemical sorption process. The process mechanism consisting of both surface adsorption and pore diffusion was found to be complex. The sorption data have been analyzed and fitted to sorption isotherm of the Freundlich, Langmuir, and Redlich–Peterson models. The regression coefficient for both Langmuir and Redlich–Peterson isotherms were higher than those secured for Freundlich isotherm implying that the biosorption system is possibly monolayer coverage of the L. variegata surface by the cadmium and lead ions. FT-IR studies revealed that Cd(II) and Pb(II) binding to L. variegata occurred primarily through biomass carboxyl groups accompanied by momentous interactions of the biomass amino and amide groups. In this study, we have observed that L. variegata had maximum biosorption capacity for Cd(II) and Pb(II) reported so far for any marine algae. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Biosorption of Ni (II) by Schizosaccharomyces pombe: kinetic and thermodynamic studies

The potential of the dried yeast, wild-type Schizosaccharomyces pombe, to remove Ni(II) ion was investigated in batch mode under varying experimental conditions including pH, temperature, initial metal ion concentration and biosorbent dose. Optimum pH for biosorption was determined as 5.0. The highest equilibrium uptake of Ni(II) on S. pombe, q _e, was obtained at 25 °C as 33.8 mg g⁻¹. It decreased with increasing temperature within a range of 25–50 °C denoting an exothermic behaviour. Increasing initial Ni(II) concentration up to 400 mg L⁻¹ also elevated equilibrium uptake. No more adsorption took place beyond 400 mg L⁻¹. Equilibrium data fitted better to Langmuir model rather than Freundlich model. Sips, Redlich–Peterson, and Kahn isotherm equations modelled the investigated system with a performance not better than Langmuir. Kinetic model evaluations showed that Ni(II) biosorption process followed the pseudo-second order rate model while rate constants decreased with increasing temperature. Gibbs free energy changes (ΔG°) of the system at 25, 30, 35 and 50 °C were found as −1.47E + 4, −1.49E + 4, −1.51E + 4, and −1.58E + 4 J mol⁻¹, respectively. Enthalpy change (ΔH°) was determined as −2.57E + 3 J mol⁻¹ which also supports the observed exothermic behaviour of the biosorption process. Entropy change (ΔS°) had a positive value (40.75 J mol⁻¹ K⁻¹) indicating an increase in randomness during biosorption process. Consequently, S. pombe was found to be a potential low-cost agent for Ni(II) in slightly acidic aqueous medium. In parallel, it has been assumed to act as a separating agent for Ni(II) recovery from its aqueous solution.     

Utilization in alginate beads for Cu(II) and Ni(II) adsorption of an exopolysaccharide produced by <Emphasis Type="Italic">Chryseomonas luteola</Emphasis> TEM05

Copper and nickel adsorption onto calcium alginate, sodium alginate with an extracellular polysaccharide (EPS) produced by the activated sludge bacterium Chryseomonas luteola TEM05 and the immobilized C. luteola TEM05 from aqueous solutions were studied. After that, the multi metal ions containing these ions together were prepared and partial competitive adsorptions of these mixtures were also investigated. The metal adsorption of gel beads were carried out at pH 6.0, 25 °C. The maximum adsorption capacities in Langmuir isotherm for calcium alginate, calcium alginate + EPS, calcium alginate + C. luteola TEM05 and calcium alginate + EPS + C. luteola TEM05 were 1.505, 1.989, 1.976, 1.937 mmol/g dry weight for Cu(II) and 0.996, 1.224, 1.078, 1.219 mol/g dry weight for Ni(II), respectively.The competitive biosorption capacities of the carrier for all metal ions were lower than single conditions.     

Biosorption of heavy metals by the exopolysaccharide produced by <Emphasis Type="Italic">Paenibacillus jamilae</Emphasis>

The biosorption of several toxic heavy metals (Pb, Cd, Co, Ni, Zn and Cu) by the exopolysaccharide (EPS) produced by Paenibacillus jamilae, a potential biosorbent for metal remediation and recovery was studied. Firstly, the biochemical composition of this bacterial polymer was determined. Glucose was the most abundant neutral sugar, followed by galactose, rhamnose, fucose and mannose. The polymer presented a high content of uronic acids (28.29%), which may serve as binding sites for divalent cations. The presence of carboxylic groups was also detected by infrared spectroscopy. The EPS presented an interesting affinity for Pb in comparison with the other five metals. Lead biosorption (303.03 mg g⁻¹) was tenfold higher (in terms of mg of metal adsorbed per gram of EPS) than the biosorption of the rest of metals. Biosorption kinetics, the effect of pH and the effect of competitive biosorption were determined. Finally, we found that the EPS was able to precipitate Fe(III), but the EPS-metal precipitate did not form with Fe(II), Pb(II), Cd(II), Co(II), Ni(II), Cu(II) and Zn(II).     

Anions effects on biosorption of Mn(II) by extracellular polymeric substance (EPS) from Rhizobium etli

Microbial extracellular polymeric substances (EPS) are potential biosorbents for metal remediation and recovery. The Langmuir and Freundlich kinetics of Mn(II) binding by the EPS from a novel Mn(II) oxidising strain of Rhizobium etli were determined. Maximum manganese specific adsorptions (q _max) decreased in the sequence: sulphate (62 mg Mn per g EPS) > nitrate (53 mg g^–1) > chloride (21 mg g^–1). Consideration of the anion during kinetic studies is usually neglected but is important in providing more practical and comparable data between different biosorbent systems.     

Biosorption of Copper by Paenibacillus polymyxa Cells and their Exopolysaccharide

Summary Biosorption of heavy metals by gram-positive, non-pathogenic and non-toxicogenic Paenibacillus polymyxa P13 was evaluated. Copper was chosen as a model element because it is a pollutant originated from several industries. An EPS (exopolysaccharide)-producing phenotype exhibited significant Cu(II) biosorption capacity. Under optimal assay conditions (pH 6 and 25 °C), the adsorption isotherm for Cu(II) in aqueous solutions obeyed the Langmuir model. A high q value (biosorption capacity) was observed with whole cells (q_max=112 mgCu g⁻¹). EPS production was associated with hyperosmotic stress by high salt (1 M NaCl), which led to a significant increase in the biosorption capacity of whole cells (q_max=150 mgCu g⁻¹). Biosorption capacity for Cu(II) of the purified EPS was investigated. The maximum biosorption value (q) of 1602 mg g⁻¹ observed with purified EPS at 0.1 mg ml⁻¹ was particularly promising for use in field applications.     

Assessment of Cu (II)-Bearing Montmorillonite on Cd Adsorption

The abilities of montmorillonite (MMT) and Cu (II)-bearing montmorillonite (Cu-MMT) for adsorption of Cd from aqueous solutions have been studied at different optimized conditions of shaking time, pH value, and initial concentration, respectively. The results showed that the adsorbability of Cu-MMT onto Cd is stronger than the MMT. The amount of Cu-MMT necessary to remove Cd from solution was about 0.5 g for 100–200 mg/L Cd solution at a pH of 4.0. The maximum adsorption (94%) was 20 min of shaking time using Cu-MMT as adsorbent. The maximum adsorption of Cd = 95% at a pH of 4.0. By increasing the initial concentration, the adsorption amount of Cd onto Cu-MMT increased. Animal experiment of this study indicated that the addition of Cu-MMT to the Cd-contaminated diet of pigs reduced significantly the Cd levels in tissues (p < 0.05) and increased contents in feces (p < 0.01), improving the safety of animal products. Thus, the overall results established the use of Cu-MMT as a heavy metal adsorbent in animal’s diets, implying a potential protective role against heavy metal toxicities.     

Sorption of Cr(VI), Cu(II) and Pb(II) by growing and non-growing cells of a bacterial consortium

This paper reports the sorption of three metallic ions, namely Cr(VI), Cu(II) and Pb(II) in aqueous solution by a consortium culture (CC) comprising an acclimatised mixed bacterial culture collected from point and non-point sources. Metal sorption capability of growing and non-growing cells at initial pH of between 3 and 8 in the 1-100mg/L concentration range were studied based on Q(max) and K(f) values of the Langmuir and linearised Freundlich isotherm models, respectively. Maximal metal loading was generally observed to be dependent on the initial pH. Growing cells displayed significant maximal loading (Q(max)) for Pb(II) (238.09 mg/g) and Cu(II) (178.87 mg/g) at pH 6 and at pH 7 for Cr(VI) (90.91 mg/g) compared to non-growing cells (p < 0.05). At the pH range of 6-8, growing cells showed higher loading capacity compared to non-growing cells i.e. 38-52% for Cr, 17-28% for Cu and 3-17% for Pb. At lower metal concentrations and at more acidic pH (3-4) however, non-growing cells had higher metal loading capacity than growing cells. The metal sorption capacity for both populations were as follows: Pb(II) > Cu(II) > Cr(VI).     

Biosorption of Cr(VI) onto marine Aspergillus niger: experimental studies and pseudo-second order kinetics

The removal of hexavalent chromium from aqueous solution was studied in batch experiments using dead biomass of three different species of marine Aspergillus after alkali treatment. All the cultures exhibited potential to remove Cr(VI), out of which, Aspergillus niger was found to be the most promising one. This culture was further studied employing variation in pH, temperature, metal ion concentration and biomass concentration with a view to understand the effect of these parameters on biosorption of Cr(VI). Higher biosorption percentage was evidenced at lower initial concentration of Cr(VI) ion, while the sorption capacity of the biomass increased with rising concentration of ions. Biomass as low as 0.8 g l⁻¹ could biosorb 95% Cr(VI) ions within 2,880 min from an aqueous solution of 400 mg l⁻¹ Cr(VI) concentration. Optimum pH and temperature for Cr(VI) biosorption were 2.0 and 50°C, respectively. Kinetic studies based on pseudo second order models like Sobkowsk and Czerwinski, Ritchie, Blanchard and Ho and Mckay rate expressions have also been carried out. The nature of the possible cell–metal ion interactions was evaluated by FTIR, SEM and EDAX analysis.     

Bioreduction of Cu(II) by Cell-Free Copper Reductase from a Copper Resistant <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. NA

Environmental copper contamination is a serious human health problem. Copper reductase is produced by microorganisms to facilitate copper uptake by ATPases into the cells increasing copper biosorption. This study assessed the reduction of Cu(II) by cell-free extracts of a highly copper-resistant bacterium, Pseudomonas sp. strain NA, isolated from vineyard soil contaminated with copper. Both intact cells and cell-free extract of Pseudomonas sp. strain NA displayed substantial reduction of Cu(II). Intact cells reduced more then 80 mg L⁻¹ of Cu(II) from medium amended with 200 mg L⁻¹ of copper after 24 h of incubation. Cell-free extract of the isolate reduced more than 65% of the Cu(II) at initial copper concentration of 200 mg L⁻¹ after 24 h. Soluble protein production was high at 72 h of incubation at 100 mg L⁻¹ of copper, with more then 60 μg L⁻¹ of total soluble protein in cell-free extract recorded. Cu(II) reduction by isolate NA was increased when copper concentration increased for both intact cells and cell-free extract. Results indicate that Pseudomonas sp. strain NA produces copper reductase enzyme as the key mechanism of copper biotransformation.     

Adsorption of lead(II) from aqueous solution onto Hydrilla verticillata

The adsorption of Pb(II) onto Hydrilla verticillata was examined in aqueous solution with parameters of pH, adsorbent dosage, contact time and temperature. The linear Langmuir and Freundlich models were applied to describe equilibrium isotherms, and both models fitted well. The monolayer adsorption capacity of Pb(II) was found as 104.2 mg/g at pH 4 and 25°C. Dubinin–Radushkevich (D–R) isotherm model was also applied to the equilibrium data. The mean free energy of adsorption (15.81 kJ/mol) indicated that the adsorption of Pb(II) onto H. verticillata may be carried out via chemical ion-exchange mechanism. Thermodynamic parameters, free energy (ΔG ⁰), enthalpy (ΔH ⁰) and entropy (ΔS ⁰) of adsorption were also calculated. These parameters showed that the adsorption of Pb(II) onto H. verticillata was a feasible, spontaneous and exothermic process in nature. The influence of Cd²⁺, Cu²⁺ and Ni²⁺ on adsorption of Pb²⁺ onto H. verticillata was studied, too. In the investigated range of operating conditions, it was found that the existence of Cd ²⁺, Cu ²⁺ and Ni ²⁺ had no impact on the adsorption of Pb²⁺.     

Copper flotation waste from KGHM as potential sorbent for heavy metal removal from aqueous solutions

Sorption affinity of copper flotation waste from KGHM toward Cd(II), Cr(III), Cu(II), and Pb(II) ions was investigated in this work. Batch sorption studies, using single-element synthetic aqueous solutions at various pH (2–12), contact time (10–300 min), initial concentration (100–5000 mg dm^?3; 1–100 mg dm^?3 for Cd(II)) and adsorbent dose (25–200 g dm^?3), were performed. Bonding strength of adsorbed metals was tested from the degree of desorption. The maximum metal removal was observed at pH 5–8, ≥120 min reaction time, and 25 g dm^?3 adsorbent dose. Maximum sorption capacities of studied material were 41.6, 58.8, and 83.8 mg g^?1 for Cr(III), Cu(II), and Pb(II), respectively, for 5000 mg dm^?3 initial concentration, and 0.86 mg g^?1 for Cd(II) for initial concentration of 50 mg dm^?3. Sorption isotherms were very well fitted to Langmuir (Cd, Cr, Pb) and Freundlich (Cu) models. Sorption kinetics was nearly ideally fitted to pseudo-second-order kinetic model. Desorption studies showed that most of Cr(III) (98.5%) and Pb(II) (67.3%) ions remained bound to the surface, indicating that the chemisorption dominated as a controlling process. On the other hand, mostly desorbed were Cd(II) (98.5%) and Cu(II) (90.3%) ions, which indicated that processes like physisorption or precipitation were prevailing.     

Biosorption of Cu(II) ions from synthetic and actual wastewater using three algal species

The use of three freshwater microalgal cultures—Chlorella sorokiniana, Anabaena laxa, and Hapalosiphon welwitschii—for sorption of copper(II) from synthetic Cu(II) solutions and Marinduque, Philippines, wastewater was studied. The optimum amount of biomass for the three species was 0.025 g dry weight. The optimum contact time for both C. sorokiniana and A. laxa was 1 h, whereas that of H. welwitschii was 30 min. All three species exhibited maximum Cu(II) sorption at pH 4.0–6.0. The Langmuir adsorption isotherm was the best fit model for the three species. The three cultures were found to be effective biosorbents when used in synthetic wastewaters of low concentration (10–30 ppm). Maximum Cu(II) reductions obtained were 88.2, 88.6, and 91.7% for the C. sorokiniana, A. laxa, and H. welwitschii cultures, respectively. C. sorokiniana, A. laxa, and H. welwitschii removed 5.70, 11.16, and 7.15% of Cu(II), respectively, when applied to wastewater taken from Consolidated Mines Inc. (CMI) containing around 150 ppm Cu(II). C. sorokiniana and A. laxa, in combination, exhibited 14.05% Cu(II) removal from CMI wastewater. Desorption with 0.11 M HCl effected 73.20, 64.54, and 70.85% removal of Cu(II) from the surfaces of C. sorokiniana, A. laxa, and H. welwitschii, respectively. SEM-EDS spectra of the three species confirmed the presence of Cu(II) on their surfaces. Presented at the 6th Meeting of the Asia Pacific Society of Applied Phycology, Manila, Philippines.     

Concurrent sorption of Zn(II), Cu(II) and Co(II) by Oscillatoria angustissima as a function of pH in binary and ternary metal solutions

This paper reports biosorption of Zn(II), Cu(II) and Co(II) onto O. angustissima biomass from single, binary and ternary metal solutions, as a function of pH and metal concentrations via Central Composite Design generated by statistical software package Design Expert 6.0. The experimental design revealed that metal interactions could be best studied at lower pH range i.e. 4.0-5.0, which facilitates adequate availability of all the metal ions. The sorption capacities for single metal decreased in the order Zn(II)>Co(II)>Cu(II). In absence of any interfering metals, at pH 4.0 and an initial metal concentration of 0.5 mM in the solution, the adsorption capacities were 0.33 mmol/g Zn(II), 0.26 mmol/g Co(II) and 0.12 mmol/g Cu(II). In a binary system, copper inhibited both Zn(II) and Co(II) sorption but the extent of inhibition of former was greater than the latter; sorption values being 0.14 mmol/g Zn(II) and 0.27 mmol/g Co(II) at initial Zn(II) and Co(II) concentration of 1.5 mM each, pH 4.0 and 1mM Cu(II) as the interfering metal. Zn(II) and Co(II) were equally antagonistic to each others sorption; Zn(II) and Co(II) sorption being 0.23 and 0.24 mmol/g, respectively, at initial metal concentration of 1.5 mM each, pH 4.0 and 1mM interfering metal concentration. In contrast, Cu(II) sorption remained almost unaffected at lower concentrations of the competing metals. Thus, in binary system inhibition dominance observed was Cu(II)>Zn(II), Cu(II)>Co(II) and Zn(II) approximately Co(II), due to this the biosorbent exhibited net preference/affinity for Cu(II) sorption over Zn(II) or Co(II). Hence, the affinity series showed a trend of Cu(II)>Co(II)>Zn(II). In a ternary system, increasing Co(II) concentration exhibited protection against the inhibitory effect of Cu(II) on Zn(II) sorption. On the other hand, the inhibitory effect of Zn(II) and Cu(II) on Co(II) sorption was additive. The model equation for metal interactions was found to be valid within the design space.     

Role of the Ca-pectates on the accumulation of heavy metals in the root apoplasm

In order to better understand the processes that regulate the accumulation in the apoplasm of heavy metals and their mobilization by the plant metabolites it is essential to study the mechanisms that regulate the interactions between metal ions and pectins. In such a context, the sorption of Cd(II), Zn(II), Cu(II) and Pb(II) from single and multi-metal solutions, by a Ca-polygalacturonate gel with a degree of esterification of 18.0 (PGAM₁) and 65.5% (PGAM₂) was studied in the 3.0–6.0 pH range in the presence of CaCl₂ 2.5 mM. The sorption of Cr(III) from single metal solution was also considered. The results show that the amount of each metal ion sorbed increases with increasing the initial metal ion concentration and pH. The data from the single metal solution tests show that at pH 6.0 the affinity of the metal ions towards the PGAM₁ matrix follows the order: Cr(III) > Cu(II) ? Pb(II) ? Zn(II) ? Cd(II). The simultaneous sorption of the bivalent metal ions by the PGAM₁ gels indicates that Pb(II) is selectively sorbed. The FT-IR spectra show that the carboxylate groups are mainly responsible for the metal ion coordination. The ability of PGAM₂ to accumulate Cr(III), Cu(II), and Pb(II) was lower than that found in the PGAM₁ systems whereas the sorption of Zn(II) and Cd(II) was negligible.     

Evaluation of chromium(VI) removal behaviour by two isolates of Synechocystis sp. in terms of exopolysaccharide (EPS) production and monomer composition

Chromium(VI) removal and its association with exopolysaccharide (EPS) production in cyanobacteria were investigated. Synechocystis sp. BASO670 produced higher EPS (548 mg L⁻¹) than Synechocystis sp. BASO672 (356 mg L⁻¹). While the EC₅₀ of the Cr(VI) for Synechocystis sp. BASO670 and Synechocystis sp. BASO672 were determined as 11.5 mg L⁻¹, and 2.0 mg L⁻¹, respectively, there was no relation between Cr(VI) removal and EPS production. Synechocystis sp. BASO672, which has higher EPS value, removed (33%) more Cr(VI) than Synechocystis sp. BASO670. Monomer compositions of EPS of each of the isolates were determined differently. Synechocystis sp. BASO672 which removed higher Cr(VI), had higher values of uronic acid and glucuronic acid (192 μg/mg and 89%, respectively). Our results showed that EPS might play a role in Cr(VI) tolerance. Monomer composition, especially uronic acid and glucuronic acid content of EPS may have enhanced Cr(VI) removal.