Rhodium aryloxide complexes containing terdentate nitrogen ligands, C-O bond formation, hydrogen bonding with phenol and oxidative addition reactions. Molecular structure of an Rh(III)-acetyl complex

The new rhodium(I) phenoxide complexes [Rh(OPh) (2,6-(CH=R²)₂C₅H₃N)] (R² = i-Pr(3), t-Bu(4)) containing strongly electrondonating N-N′-N ligands, have been prepared by a metathesis reaction of [RhCl(2,6-(CH=R²)₂C₅H₃N)] (R² = i-Pr (1), t-Bu (2)) with NaOPh. These rhodium(I) phenoxide complexes 3 and 4, which are very sensitive to O₂ but stable towards H₂O, give with phenol the adducts [Rh(OPh) (2,6-(CH=NR²)₂C₅H₃N)] · HOPh (R2 = i-Pr (5), t-Bu (6)), which contain strong O-HO hydrogen bonds. The hydrogen bonded phenol could not be extracted with diethyl ether, while no exchange of the hydrogen bonded phenol and the phenoxide ligand in 4 is observed on the NMR time scale. However, a small excess of phenol results in exchange of the hydrogen bonded phenol, the coordinated phenoxide ligand and free phenol on the NMR time scale. Reaction of 3 and 4 with p-nitrophenol afforded [Rh(OC₆H₄-(NO₂-4))(2,6-(CH=R²)₂C₅H₃N)] · HOPh (R² = i-Pr (7), t-Bu (8)) in which the formed phenol is hydrogen bonded to the Rh(I)-OC₆H₄-(NO₂-4) moiety. The O-HO bond is less strong than in 5 and 6, as the hydrogen bonded phenol could be removed by diethyl ether.Treatment of 3 with acetyl chloride and benzoyl chloride in benzene at room temperature gave phenylacetate and RhCl₂(C(O)C₆H₃) (2,6(C(H)=N-i-Pr)₂C₅H₃N)] (15), and phenylbenzoate and [RhCl₂(C(O)Ph) (2,6-(C(H)=N-i-Pr)₂C₅H₃N)] (19), respectively. Complex 15 and the analogous complex [RhCl₂(C(O)CH₃) (2,6-(C(H)=N-t-Bu)₂C₅H₃N)] (16) could also be prepared directly from acetyl chloride and 1 or 2, respectively. The single crystal X-ray determination of complex 16, monoclinic, space group P2₁/_c, a = 10.0477(5), b= 11.7268(6), c= 19.2336(9) Å, β = 92.041(4)°, Z = 4, R₁ = 0.0281, shows that the acetyl group occupies an axial position, while the N-N′-N ligand is positioned equatorially. In solution this geometry remains unchanged as was shown by variable temperature ¹H NMR measurements. When the oxidative addition of acetyl chloride to 3 was carried out at −78°C in toluene the intermediate complex [RhCl(OPh) (C(O)Me) (2,6-(C(H)=N-i-Pr)₂C₅H₃N)] (11) could be isolated, which at room temperature reductively eliminates phenylacetate with formation of 1. Oxidative addition of acetyl chlori de to 4 at room temperature gives [RhCl(OPh) (C(O)Me) (2,6-(C(H)=Nt-Bu)₂C₅H₃N)] (12) which yields phenylacetate and 2 at 70°C in benzene by inductive elimination. Treatment of 3 with two equivalents of benzyl chloride afforded a mixture of [RhCl(OPh) (CH₂Ph) (2,6-(C(H)=N-i-Pr)₂C₅H₃N)] (13) and [RhCl₂(CH₂Ph) (2,6-(C(H)=N-i-Pr)₂C₅H₃N)] (17) and some non-characterizable organic products, while 4 only yielded [RhCl(OPh) (CH₂Ph) (2,6-(C(H)=N-tBu)₂C₅H₃N)] (14).     

Amidino-complexes of iron(II) and (III)

Lithioamidines {R′N(Li)C(R)NR′, I; R = CH₃, R′ = C₆H₅, p-CH₃,C₆H₄} react with iron(III) chloride

in monoglyme to produce navy-blue, high spin Fe{R′NC(R)NR′}₃ complexes which are extremely air and moisture sensitive. The corresponding reaction when R = R′ = C₆H₅ produces a soluble red complex and an air-stable green complex, whereas when R = H, R′ = C₆H₅ and R = R′ = C₆H₅ and the reaction is started at ca. ?20°, red and green complexes respectively are formed. Though all the complexes are formulated Fe{R′NC(R)NR′}₃, their properties reflect association through bridging amidino-groups. Iron(II) chloride reacts with I(R = CH₃, R′ = p-CH₃C₆H₄) to form two complexes, one crimson and soluble in organic solvents, and one brown and insoluble, which are fomulated [Fe{R′NC(R)NR′}₂]_n. The iron(III) complexes failed to react with, or were decomposed by, a variety of reducing, electrophilic and nucleophilic reagents, though blue Fe{p-CH₃C₆H₄NC(CH₃)N-p-CH₃C₆H₄}₃ reacts readily with nitric oxide to form a purple addition complex from which the N-nitroso-compound p-CH₃C₆H₄NC(CH₃)N(NO)-p-CH₃C₆H₄ was obtained in high yield. Treatment of the corresponding brown iron(II) complex with nitric oxide gave no reaction.     

Synthesis, characterization and electrochemical behavior of oxo-bridged (arylimido)[tris(3,5-dimethylpyrazolyl)borato] molybdenum(V) complexes

Reaction of the oxo-molybdenum(V) precursor [MoTp*(O)Cl₂] [Tp* = hydrotris(3,5-dimethyl-1-pyrazolyl)borate] with H₂NC₆H₄R-4 (R = OEt; OPr) in refluxing toluene in the presence of Et₃N afforded the binuclear oxo-bridged oxo(arylimido) molybdenum(V) complexes [Tp*Mo(O)Cl](μ-O)[Tp*Mo(NC₆H₄OR-4)Cl]. Surprisingly, a similar reaction between [MoTp*(O)Cl₂] and C₆H₅NH₂ yielded the previously reported compound [{MoTp*(O)Cl}₂(μ-O)] as the only product. The new compounds were characterized by microanalytical data, mass spectrometry, IR and ¹H NMR spectroscopy. Cyclic voltammetric studies of the new compounds, of the previously reported compounds [Tp*Mo(O)Cl](μ-O)[Tp*Mo(NAr)Cl] (Ar = C₆H₄OMe-4, C₆H₄F-3, C₆H₄Cl-4, C₆H₄Br-4, and C₆H₄I-3), and of [{MoTp*(O)Cl}₂(μ-O)] revealed a reversible one-electron oxidation process that is little affected by the nature of the substituent on the aryl group, whereas it is greatly affected by replacement of the imido ligand with an oxo ligand. The [{MoTp*(O)Cl}₂(μ-O)] compound also shows a one-electron reduction process.     

Photolytic CO-substitution reaction of organoiron thiocarboxylate derivatives CpFe(CO)2SCOR (R=alkyl, aryl) with diphosphines (Ph2P(CH2)nPPh2) (n=1-6): X-ray crystal structure of [CpFe(dppm)SCO(3,5-(NO2)2C6H3)]

The photolytic CO-substitution reaction of the organoiron thiocarboxylate complexes CpFe(CO)₂SCOR (R=CH₃, 2-CH₃C₆H₄, 2-NO₂C₆H₄, 4-NO₂C₆H₄, 3,5-(NO₂)₂C₆H₃) with diphosphines (Ph₂P(CH₂)_nPPh₂) [n=1 (dppm), n=2 (dppe), n=3 (dpppr), n=4 (dppb), n=5 (dppp), n=6 (dpph)] at room temperature using 1:2 (metal-ligand) molar ratio afforded exclusively the disubstituted complexes CpFe(Ph₂P(CH₂)_nPPh₂)SCOR when n=1, 2 and 3 and the monosubstituted analogs CpFe(CO)(Ph₂P(CH₂)_nPPh₂)SCOR when n=4, 5 and 6. This reaction was found to be strongly influenced by the backbone length of the diphosphine ligand, the nature of the R group of the thiocarboxylate moiety and the metal-ligand molar ratios. The crystal structure of CpFe(dppm)SCO(3,5-(NO₂)₂C₆H₃) was determined.     

Reaction mechanism of CH3M≡MCH3 (M=C, Si, Ge) with C2H4: [2+1] or [2+2] cycloaddition?

The mechanism of the cycloaddition reaction CH₃M≡MCH₃ (M=C, Si, Ge) with C₂H₄ has been studied at the CCSD(T)/6-311++G(d,p)//MP2/6-311++G(d,p) level. Vibrational analysis and intrinsic reaction coordinate (IRC), calculated at the same level, have been applied to validate the connection of the stationary points. The breakage and formation of the chemical bonds of the titled reactions are discussed by the topological analysis of electron density. The calculated results show that, of the three titled reactions, the CH₃Si≡SiCH₃+C₂H₄ reaction has the highest reaction activity because it has the lowest energy barriers and the products with the lowest energy. The CH₃C≡CCH₃+C₂H₄ reaction occurs only with difficulty since it has the highest energy barriers. The reaction mechanisms of the title reactions are similar. A three-membered-ring is initially formed, and then it changed to a four-membered-ring structure. This means that these reactions involve a [2+1] cycloaddition as the initial step, instead of a direct [2+2] cycloaddition.     

Synthesis, characterization and structure of some arylantimony ferrocenylacrylates

A series of arylantimony ferrocenylacrylates with the formula (C₅H₅FeC₅H₄CHCHCO₂)_nSbAr_(5−n) (n=1, 2; Ar C₆H₅, 4-CH₃C₆H₄, 3-CH₃C₆H₄, 2-CH₃C₆H₄, 4-FC₆H₄) have been synthesized and characterized by elemental analysis, IR, ¹H NMR and mass spectra. The crystal structures of C₅H₅FeC₅H₄CHCHCO₂Sb(C₆H₅)₄ (I₁) and (C₅H₅FeC₅H₄CHCHCO₂)₂Sb(C₆H₅)₃ (II₁) have been determined by X-ray diffraction.     

Lanthanide complexes of a cross-bridged cyclam ligand: Isolation and structural characterization of unusual trinuclear μ3-imido Yb(III) cluster cations and a mixed valence Yb(II/III) salt containing an Yb(II) anion

The reaction of the cross-bridged cyclam ligand H₂CBC with divalent ytterbium precursors, Yb[N(SiMe₃)₂]₂[L]₂ (L = THF or Et₂O) or Yb(C₅Me₅)₂(OEt₂) afforded polymeric [Yb(CBC)]_n (1), as the primary product. In addition, the Yb[N(SiMe₃)₂]₂[L]₂ reactions also afforded a small amount of an unusual mixed valence salt containing a trinuclear Yb(III) cluster cation featuring a triply bridging NH group and a mononuclear Yb(II) anion, {[Yb(CBC)]₃[μ³-NH]}⁺ {Yb[N(SiMe₃)₂]₃}⁻ (2). A related cluster containing an iodide counterion, {[Yb(CBC)]₃[μ³-NH]}⁺ I⁻ (3), was also isolated in one case. The structures of salts 2 and 3 were determined by X-ray crystallography. Reaction of [Yb(CBC)]_n with p-tolyldisulfide, (C₆H₄MeS)₂, produced burgundy crystals of [Yb(CBC)(S-p-C₆H₄Me)]_n (4). The ¹H NMR spectra of 2 suggests that the trinuclear cation remains intact in THF-d₈ solution.     

Macrocyclic dinuclear Zn(II) complexes: synthesis, structure and hydrolysis of tris(p-nitrophenyl) phosphate

A series of mono- and dinuclear zinc complexes of 3,6,9,17,20,23-hexaaza-29,30-dihydroxy-13,27-dimethyl-tricyclo[23,3,1^11,15]triaconta-1(28),11,13,15(30),25,26-hexaene (H₂L or BDBPH) have been defined in solution by potentiometry. The crystal structure of [Zn₂C₂₆H₄₀N₆O₂(CH₃OH)₂]·Br₂ has been determined by X-ray. Each zinc ion is coordinated to three nitrogen atoms, a bridged-phenolic oxygen atom, and a methanolic oxygen atom, which define a six-coordinated octahedron. Bond lengths of ZnN are in the range of 2.104(3)-2.120(3) Å and distances between Zn and O (bridged-phenolic oxygen) are 2.052(2), 2.062(2) Å, respectively. The dinuclear complexes: [Zn₂L]²⁺ and [Zn₂L(OH)]⁺ play crucial roles in hydrolytic reaction of tris(4-nitrophenyl)phosphate. A possible mechanism showed that [Zn₂L(OH)]⁺ acts as a nucleophile and [Zn₂L]²⁺ stabilizes the formation of the intermediate: [Zn₂L-BNP].     

Three 1-D complexes generated from a ferrocenyl carboxylate cadmium(II) precursor through substitution reactions of N-containing ligands: Syntheses, crystal structures and electrochemical properties

Using sodium 2-chloro-4-ferrocenylbenzoate as functional ligand, a mononuclear precursor complex [Cd(η²-OOCClH₃C₆Fc)₂(H₂O)₃](CH₃OH)₂} P1 [Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄)] was synthesized, which containing facile leaving groups. The substitution reactions of the precursor ferrocenyl carboxylate complex with basic N-containing ligands gave three 1-D polymers [Cd₂(μ₂-OOCClH₃C₆Fc)₄(bix)]_n1 [bix = 1,4-bis(imidazol-1-ylmethyl)benzene)], {[Cd₂(η²-OOCClH₃C₆Fc)₃(η-OOCClH₃C₆Fc)(mbbbm)₂](CH₃OH)₂}_n2 [mbbbm = 1,3-bis(benzimidazole-1-ylmethyl)benzene] and [Cd(η²-OOCClH₃C₆Fc)₂(pbbbm)]_n3 [pbbbm = 1,4-bis(benzimidazole-1-ylmethyl)benzene]. Single-crystal X-ray analysis reveals that the 1-D chain structures of polymers 1-3 are bridged by bix, mpbbbm and pbbbm, respectively, and the three polymers present some differences in their structures. Our results also show that the structural integrity of the precursor complex can be maintained in the resultant polymers. Electrochemical studies of the four complexes in THF/CH₃OH solution indicate that the half-wave potentials of the ferrocenyl moieties in these complexes are all shifted to positive potential compared with that of free 2-chloro-4-ferrocenylbenzoic acid.     

Synthesis and structural analysis of calix[4]arene-supported iron(III) complexes

The paper describes the reactivity of calix[4]arene dialkyl- or -silylethers H₂R₂calix, R=Me (1), Bz (2), or SiMe₃ (3) (p-tert.butyl-calix[4]arene=H₄calix), towards the iron(III) complex [FeCl(NSiMe₃)₂(thf)] 4. Bis(silylation) of H₄calix was achieved using a mixture of NEt₃ and Me₃SiCl as silylating agent, which is probably the most convenient and cheapest way for the preparation of H₂(Me₃Si)₂calix 3. [FeCl(N{SiMe₃}₂)₂(thf)] 4 has been obtained from the reaction of [FeCl₃] and commercially available K[N(SiMe₃)₂] in THF. The reactions of 4 with H₂Me₂calix and H₂Bz₂calix afford mononuclear iron(III) chloro compounds [FeCl(R₂calix)] 5 (R=Me) and 6 (R=Bz). The usage of calix[4]arene silyl ether 3 leads to a dinuclear complex [Fe₂({Me₃Si}calix)₂] 7, presumably under Me₃SiCl cleavage of a mononuclear calixarene iron(III) chloro complex. The calix[4]arene ether stabilized iron(III) chloro complexes are susceptible to nucleophilic substitution reactions, as exemplified by the reaction of 5 with sodium azide yielding an azido complex [Fe(N₃)(Me₂calix)] 8. The molecular structures of 4, 5, 6, 7, and 8 in the solid state have been determined by X-ray diffraction.     

Synthesis of cyclopentadienyl ruthenium(II) complexes containing tethered functionalities

The reaction of [C₅H₄(CH₂)_nX]Tl (1: n = 2, X = NMe₂, OMe, CN; n = 3, X = NMe₂) with [(η⁶-C₆H₆)RuCl(μ-Cl)]₂, 2, afforded the sandwich compounds [{η⁵-C₅H₄(CH₂)_nX}Ru(η⁶-C₆H₆)]PF₆, 3, and [η⁵-C₅H₄(CH₂)_nX]₂Ru, 4. Photolytic cleavage of 3 in acetonitrile afforded the tethered products [{η⁵:κN-C₅H₄(CH₂)_nX}Ru(CH₃CN)₂]PF₆, 5.     

N-substituted ethylcarbamate complexes of thorium(IV) and lanthanum(III) nitrates

N-substituted ethylcarbamates form with thorium nitrate the complexes Th(NO₃)₄·3RHNC(O)OC₂H₅ (where R = CH₃, C₂H₅, C₆H₅(CH₃)CH) and with lanthanum nitrate the complexes La(NO₃)₃· 2RR′NC(O)OC₂H₅·3H₂O (where R = CH₃, C₂H₅, C₆H₅(CH₃)CH; R′ = H and R = CH₃, C₆H₅; R′ = C₂H₅ or R = R′ = CH₃). In addition the anhydrous La(NO₃)₃·3(C₂H₅)₂NC(O)OC₂H₅ has been isolated. From the IR spectra it is deduced that the carbamates coordinate the metal through the carbonyl oxygen atom and that the nitrato groups act as chelated ligands. ¹H nmr spectral data of the complexes are reported and discussed.     

Aromatic N-oxide bridged copper(II) coordination polymers: Synthesis, characterization and magnetic properties

The complexes [Cu₂(o-NO₂-C₆H₄COO)₄(PNO)₂] (1), [Cu₂(C₆H₅COO)₄(2,2′-BPNO)]_n (2), [Cu₂(C₆H₅COO)₄(4,4′-BPNO)]_n (3), [Cu(p-OH-C₆H₄COO)₂(4,4′-BPNO)₂·H₂O]_n (4), (where PNO = pyridine N-oxide, 2,2′-BPNO = 2,2′-bipyridyl-N,N′-dioxide, 4,4′-BPNO = 4,4′-bipyridyl-N,N′-dioxide) are prepared and characterized and their magnetic properties are studied as a function of temperature. Complex 1 is a discrete dinuclear complex while complexes 2-4 are polymeric of which 2 and 3 have paddle wheel repeating units. Magnetic susceptibility measurements from polycrystalline samples of 1-4 revealed strong antiferromagnetic interactions within the {Cu₂}⁴⁺ paddle wheel units and no discernible interactions between the units. The complex 5, [Cu(NicoNO)₂·2H₂O]_n·4nH₂O, in which the bridging ligand to the adjacent copper(II) ions is nicotinate N-oxide (NicoNO) the transmitted interaction is very weakly antiferromagnetic.     

Syntheses, structures and magnetic properties of tetra- and heptanuclear iron(III) clusters incorporating phosphonate ligands

Two iron(III) complexes, [Fe₄OCl(O₂CMe)₃(O₃PC₆H₉)₃(py)₅] (1) and [Fe₇O₂(O₂CPh)₉(O₃PC₆H₉)₄(py)₆] (2), have been prepared through solution reactions of [Fe₃O(O₂CR)₆(H₂O)₃]Cl (R = Me, Ph) with cyclohexenephosphonic acid. Both compounds contain triangular oxo-centered [Fe₃(μ₃-O)]⁷⁺ units. In complex 1, the fourth iron atom is capped on this triangular unit through O-P-O bridges, forming a tetranuclear cluster with a tetrahedral arrangement of iron atoms. In complex 2, two equivalent [Fe₃(μ₃-O)]⁷⁺ units are connected by the fourth iron atom through four phosphonate ligands, forming a heptanuclear cluster. Variable temperature susceptibility measurements were performed for 1 and 2. Both exhibit dominant antiferromagnetic interactions between the Fe(III) centers.     

Synthesis, characterizations, and crystal structures of triorganotin(IV) derivatives with areneseleninic acids

Six new triorganotin(IV) complexes, [R₃Sn(O₂SeC₆H₄Cl)]_n (R = Me 1; Ph 2), [R₃Sn(O₂SeC₆H₄Me)]_n (R = Me 3; Ph 4), [R₃Sn(O₂SeC₆H₄Bu)]_n (R = Me 5; Ph 6) have been synthesized by the reaction of 4-chlorobenzeneseleninic acid, p-Tolueneseleninic acid, and 4-tert-butylbenzeneseleninic acid with triorganotin(IV) chloride in the presence of sodium ethoxide. All of the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, and ¹¹⁹Sn) spectroscopy, and X-ray crystallography. Crystal structures show that all of the complexes exhibit 1D infinite chain structures which are generated by the bidentate oxygen atoms and the five-coordinated tin centers.     

Metal complexes of new scorpionate ligands: 2,2′-Bis(pyrazolyl)ethylamine and its derivatives

The new bis(pyrazolyl)amine ligand NH₂CH₂CH(pz)₂ (1) was prepared from the reaction of N-[2,2-bis(pyrazolyl)ethyl]-1,8-naphthalimide with hydrazine monohydrate. A substituted derivative, C₆H₅CH₂NHCH₂CH(pz)₂ (2), was prepared by the reaction of 1 with benzaldehyde followed by reduction with NaBH₄. Ligand 1 was also converted by two methods to the new bitopic, para-linked bis(pyrazolyl)amine ligand p-C₆H₄(CH₂NHCH₂CH(pz)₂)₂, (3). The reactions of the ligands 1-3 with [Cu(PPh₃)₂]NO₃ yields {(PPh₃)Cu[(pz)₂CHCH₂NH₂]}NO₃, {(PPh₃)Cu[(pz)₂CHCH₂NHCH₂C₆H₅]}NO₃ and {[(PPh₃)Cu]₂[p-((pz)₂CHCH₂NHCH₂)₂C₆H₄]}(NO₃)₂·solvate, respectively. Complex {(N₃)₂Cu[(pz)₂CHCH₂NHCH₂C₆H₅]} was obtained from a methanol solution of 2, copper(II) acetate monohydrate and sodium azide. The complex {Cd[(pz)₂CHCH₂NHCH₂C₆H₅]₂}(PF₆)₂·3C₃H₆O was synthesized by reaction of the protonated form of ligand 2, [(pz)₂CHCH₂NH₂CH₂C₆H₅]PF₆, with Cd(acac)₂. In all of the structures the ligands are tridentate, bonding to the metal through the lone pair on the amine group as well as through the pyrazolyl rings - they act as true scorpionates. The solid state structures all have extensive non-covalent interactions, with the N-H functional groups of the amines participating in both N-H?π and N-H?O or N-H?N hydrogen bonding interactions.     

Dialkyl- and alkylenedithiophosphates of gallium(III)

Gallium(III) tris-dialkyldithiophosphates, Ga[S₂P(OR)₂]₃ (R = C₂H₅, n-C₃H₇, i-C₃H₇, n-C₄H₉ and i-C₄H₉) and gallium(III) tris-alkylenedithiophosphates, Ga(S₂$\text{POGO}$)₃ [G = -CH₂C(C₂H₅)₂CH₂-, -C(CH₃)₂C(CH₃)₂ and -C(CH₃)₂CH₂CH(CH₃)] have been synthesized for the first time by the reactions of gallium(III) chloride with the alkali metal salt of the corresponding ligand in anhydrous benzene in 1:3 molar ratio respectively.These compounds are crystalline solids or viscous liquids and are soluble in common organic solvents, in which they show monomeric behaviour. Based on elemental analyses, molecular weight determinations, IR and NMR (¹H and ³¹P) spectral data, chelate octahedral structures have been proposed for these derivatives.     

A comparative study of ferrocenyl carboxylate cadmium(II) complexes prepared by two different synthetic methods

Reaction of ferrocenyl carboxylate H₂bfcs with Cd(Ac)₂ · 2H₂O (H₂bfcs = 1,1′-bis(3-carboxy-1-oxopropyl)ferrocene) gives the mononuclear tetrahydrate precursor Cd(Hbfcs)₂(H₂O)₄ (1). Investigation on the substitution reactions of 1 with imidazole or 2,2′-bpy afforded two one-dimensional (1D) complexes {[Cd₂(bfcs)₂(C₃H₄N₂)₆] · 4H₂O}_n (2) and {[Cd(bfcs)(2,2′-bpy)(H₂O)] · 2H₂O}_n (4) (2,2′-bpy = 2,2′-bipyridine), respectively. However, the one-step reactions of H₂bfcs, Cd(Ac)₂ · 2H₂O with imidazole or 2,2′-bpy result in the formation of two different 1D complexes {[Cd(bfcs)(C₃H₄N₂)₂] · CH₃OH · 2H₂O}_n (3) and [Cd(bfcs)(CH₃OH)]_n (5). It can be seen from the results that applying different synthetic routes produce dissimilar complexes from however the same materials and under the same reaction conditions. In addition, investigations of differential pulse voltammetry of these four 1D complexes indicate that their half-wave potentials are slightly higher than that of H₂bfcs.     

Optically active iridium complexes with cyclopentadienyl-phosphine ligands: synthesis and oxidative addition of methyl iodide

The dimer [Ir(μ-Cl)(C₈H₁₄)₂]₂ reacts with the ligands (S)-(C₅H₄CH₂CH(Ph)PPh₂)Li and (R)-(C₅H₄CH(Cy)CH₂PPh₂)Li to give (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(C₈H₁₄)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(C₈H₁₄)], which upon treatment with CH₃I at room temperature afford the cationic iridium(III) compounds (S,S_Ir)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(C₈H₁₄)][I] as a single diastereomer, and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(C₈H₁₄)][I] as a 9:1 mixture of two diastereomers. If the oxidative addition reaction is performed at reflux in methylene chloride, the starting complexes convert to the neutral compounds (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(I)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(I)] as 1.6:1 and 3.3:1 mixtures of diastereoisomers, respectively. Carbonyl iridium complexes are synthesized by reacting [IrCl(CO)(PPh₃)₂] with the ligands to afford (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CO)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CO)]. They give upon treatment with CH₃I the cationic species (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(CO)][I] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(CO)][I] as 1.6:1 and 3:1 mixture of diastereomers, respectively. No migratory-insertion of the methyl group into the carbonyl-metal bond has been observed even after prolonged heating.     

Supramolecular coordination polymers of silver(I) with 2-isocyanopyridine or 1,2-phenylenediisocyanide

The silver(I) complexes [Ag{C₅H₄N(NC)}]_n(BF₄)_n (1), [Ag{C₅H₄N(NC)}₂]_n(BF₄)_n (2), [Ag{C₆H₄(NC)₂}]_n(BF₄)_n (3), and [Ag{C₆H₄(NC)₂}₂]_n(BF₄)_n (4) have been synthesized using different Ag:L ratios of 2-isocyanopyridine (or 2-pyridylisocyanide, CNPy-2) or 1,2-phenylenediisocyanide ligands. The polymeric complex 2 has been characterized by X-ray diffraction revealing a polymeric chain structure. Breaking the polymeric structure of [Ag{C₆H₄(NC)₂}]_n(BF₄)_n (3) with acetonitrile, the dimeric complex [Ag{(CN)₂C₆H₄)}(NCMe)₂]₂(BF₄)₂ (5) is formed, which has been also characterized by X-ray diffraction.