Graphitic Petal Electrodes for All‐Solid‐State Flexible Supercapacitors

The charge storage characteristics of a composite nanoarchitecture with a highly functional 3D morphology are reported. The electrodes are formed by the electropolymerization of aniline monomers into a nanometer‐thick polyaniline (PANI) film that conformally coats graphitic petals (GPs) grown by microwave plasma chemical vapor deposition (MPCVD) on conductive carbon cloth (CC). The hybrid CC/GPs/PANI electrodes yield results near the theoretical maximum capacitance for PANI of 2000 F g^?1 (based on PANI mass) and a large area‐normalized specific capacitance of ≈2.6 F cm^?2 (equivalent to a volumetric capacitance of ≈230 F cm^?3) at a low current density of 1 A g^?1 (based on PANI mass). The specific capacitances remain above 1200 F g^?1 (based on PANI mass) for currents up to 100 A g^?1 with correspondingly high area‐normalized values. The hybrid electrodes also exhibit a high rate capability with an energy density of 110 Wh kg^?1 and a maximum power density of 265 kW kg^?1 at a current density of 100 A g^?1. Long‐term cyclic stability is good (≈7% loss of initial capacitance after 2000 cycles), with coulombic efficiencies >99%. Moreover, prototype all‐solid‐state flexible supercapacitors fabricated from these hybrid electrodes exhibit excellent energy storage performance.     

Battery‐like Supercapacitors from Vertically Aligned Carbon Nanofiber Coated Diamond: Design and Demonstrator

To fabricate battery‐like supercapacitors with high power and energy densities, big capacitances, as well as long‐term capacitance retention, vertically aligned carbon nanofibers (CNFs) grown on boron doped diamond (BDD) films are employed as the capacitor electrodes. They possess large surface areas, high conductivity, high stability, and importantly are free of binder. The large surface areas result from their porous structures. The containment of graphene layers and copper metal catalysts inside CNFs leads to their high conductivity. Both electrical double layer capacitors (EDLCs) in inert solutions and pseudocapacitors (PCs) using Fe(CN)₆^3?/4? redox‐active electrolytes are constructed with three‐ and two‐electrode systems. The assembled two‐electrode symmetrical supercapacitor devices exhibit capacitances of 30 and 48 mF cm^?2 at 10 mV s^?1 for EDLC and PC devices, respectively. They remain constant even after 10 000 charging/discharging cycles. The power densities are 27.3 and 25.3 kW kg^?1 for EDLC and PC devices, together with their energy densities of 22.9 and 44.1 W h kg^?1, respectively. The performance of these devices is superior to most of the reported supercapacitors and batteries. Vertically aligned CNF/BDD hybrid films are thus useful to construct high‐performance battery‐like and industry‐orientated supercapacitors for future power devices.     

Enhanced Li‐Ion Accessibility in MXene Titanium Carbide by Steric Chloride Termination

Pseudocapacitance is a key charge storage mechanism to advanced electrochemical energy storage devices distinguished by the simultaneous achievement of high capacitance and a high charge/discharge rate by using surface redox chemistries. MXene, a family of layered compounds, is a pseudocapacitor‐like electrode material which exhibits charge storage through exceptionally fast ion accessibility to redox sites. Here, the authors demonstrate steric chloride termination in MXene Ti₂CT_x (T_x : surface termination groups) to open the interlayer space between the individual 2D Ti₂CT_x units. The open interlayer space significantly enhances Li‐ion accessibility, leading to high gravimetric and volumetric capacitances (300 F g^?1 and 130 F cm^?3) with less diffusion limitation. A Li‐ion hybrid capacitor consisting of the Ti₂CT_x negative electrode and the LiNi_1/3Co_1/3Mn_1/3O₂ positive electrode displays an unprecedented specific energy density of 160 W h kg^?1 at 220 W kg^?1 based on the total weight of positive and negative active materials.     

Rational Design of Nickel Hydroxide‐Based Nanocrystals on Graphene for Ultrafast Energy Storage

Compact, light, and powerful energy storage devices are urgently needed for many emerging applications; however, the development of advanced power sources relies heavily on advances in materials innovation. Here, the findings in rational design, one‐pot synthesis, and characterization of a series of Ni hydroxide‐based electrode materials in alkaline media for fast energy storage are reported. Under the guidance of density functional theory calculations and experimental investigations, a composite electrode composed of Co‐/Mn‐substituted Ni hydroxides grown on reduced graphene oxide (rGO) is designed and prepared, demonstrating capacities of 665 and 427 C g^?1 at current densities of 2 and 20 A g^?1, respectively. The superior performance is attributed mainly to the low deprotonation energy and the facile electron transport, as elaborated by theoretical calculations. When coupled with an electrode based on organic molecular‐modified rGO, the resulting hybrid device demonstrates an energy density of 74.7 W h kg^?1 at a power density of 1.68 kW kg^?1 while maintaining capacity retention of 91% after 10,000 cycles (20 A g^?1). The findings not only provide a promising electrode material for high‐performance hybrid capacitors but also open a new avenue toward knowledge‐based design of efficient electrode materials for other energy storage applications.     

A Novel Sustainable Flour Derived Hierarchical Nitrogen‐Doped Porous Carbon/Polyaniline Electrode for Advanced Asymmetric Supercapacitors

Hierarchically porous nitrogen‐doped carbon (HPC)/polyaniline (PANI) nanowire arrays nanocomposites are synthesized by a facile in situ polymerization. 3D interconnected honeycomb‐like HPC was prepared by a cost‐effective route via one‐step carbonization using urea and alkali‐treated wheat flour as carbon precursor with a high specific surface area (1294 m² g^?1). The specific capacitances of HPC and HPC/PANI (with a surface area of 923 m² g^?1) electrode are 383 and 1080 F g^?1 in 1 m H₂SO₄, respectively. Furthermore, an asymmetric supercapacitor based on HPC/PANI as positive electrode and HPC as negative electrode is successfully assembled with a voltage window of 0–1.8 V in 1 m Na₂SO₄ aqueous electrolyte, exhibiting high specific capacitance (134 F g^?1), high energy density (60.3 Wh kg^?1) and power density (18 kW kg^?1), and excellent cycling stability (91.6% capacitance retention after 5000 cycles).     

Tailored Plum Pudding‐Like Co2P/Sn Encapsulated with Carbon Nanobox Shell as Superior Anode Materials for High‐Performance Sodium‐Ion Capacitors

Sodium‐ion capacitors (SICs) are emerging energy storage devices with high energy, high power, and durable life. Sn is a promising anode material for lithium storage, but the poor conductivity of the a‐NaSn phase upon sodaition hinders its implementation in SICs. Herein, a superior Sn‐based anode material consisting of plum pudding‐like Co₂P/Sn yolk encapsulated with nitrogen‐doped carbon nanobox (Co₂P/Sn@NC) for high‐performance SICs is reported. The 8–10 nm metallic nanoparticles produced in situ are uniformly dispersed in the amorphous Sn matrix serving as conductive fillers to facilitate electron transfer in spite of the formation of electrically resistive a‐NaSn phase during cycling. Meanwhile, the carbon shell buffers the large expansion of active Sn and provides a stable electrode–electrolyte interface. Owing to these merits, the yolk–shell Co₂P/Sn@NC demonstrates a large capacity of 394 mA h g^?1 at 100 mA g^?1, high rate capability of 168 mA h g^?1 at 5000 mA g^?1, and excellent cyclability with 87% capacity retention after 10 000 cycles. By integrating the Co₂P/Sn@NC anode with a peanut shell‐derived carbon cathode in the SIC, high energy densities of 112.3 and 43.7 Wh kg^?1 at power densities of 100 and 10 000 W kg^?1 are achieved.     

A High‐Energy Density Asymmetric Supercapacitor Based on Fe2O3 Nanoneedle Arrays and NiCo2O4/Ni(OH)2 Hybrid Nanosheet Arrays Grown on SiC Nanowire Networks as Free‐Standing Advanced Electrodes

In this paper, a novel freestanding core‐branch negative and positive electrode material through integrating trim aligned Fe₂O₃ nanoneedle arrays (Fe₂O₃ NNAs) is first proposed with typical mesoporous structures and NiCo₂O₄/Ni(OH)₂ hybrid nanosheet arrays (NiCo₂O₄/Ni(OH)₂ HNAs) on SiC nanowire (SiC NW) skeletons with outstanding resistance to oxidation and corrosion, good conductivity, and large‐specific surface area. The original built SiC NWs@Fe₂O₃ NNAs is validated to be a highly capacitive negative electrode (721 F g^?1 at 2 A g^?1, i.e., 1 F cm^?2 at 2.8 mA cm^?2), matching well with the similarly constructed SiC NWs@NiCo₂O₄/Ni(OH)₂ HNAs positive electrode (2580 F g^?1 at 4 A g^?1, i.e., 3.12 F cm^?2 at 4.8 mA cm^?2). Contributed by the uniquely engineered electrodes, a high‐performance asymmetric supercapacitor (ASC) is developed, which can exhibit a maximum energy density of 103 W h kg^?1 at a power density of 3.5 kW kg^?1, even when charging the device within 6.5 s, the energy density can still maintain as high as 45 W h kg^?1 at 26.1 kW kg^?1, and the ASC manifests long cycling lifespan with 86.6% capacitance retention even after 5000 cycles. This pioneering work not only offers an attractive strategy for rational construction of high‐performance SiC NW‐based nanostructured electrodes materials, but also provides a fresh route for manufacturing next‐generation high‐energy storage and conversion systems.     

3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities

Developing advanced supercapacitors with both high areal and volumetric energy densities remains challenging. In this work, self‐supported, compact carbon composite electrodes are designed with tunable thickness using 3D printing technology for high‐energy‐density supercapacitors. The 3D carbon composite electrodes are composed of the closely stacked and aligned active carbon/carbon nanotube/reduced graphene oxide (AC/CNT/rGO) composite filaments. The AC microparticles are uniformly embedded in the wrinkled CNT/rGO conductive networks without using polymer binders, which contributes to the formation of abundant open and hierarchical pores. The 3D‐printed ultrathick AC/CNT/rGO composite electrode (ten layers) features high areal and volumetric mass loadings of 56.9 mg cm^?2 and 256.3 mg cm^?3, respectively. The symmetric cell assembled with the 3D‐printed thin GO separator and ultrathick AC/CNT/rGO electrodes can possess both high areal and volumetric capacitances of 4.56 F cm^?2 and 10.28 F cm^?3, respectively. Correspondingly, the assembled ultrathick and compact symmetric cell achieves high areal and volumetric energy densities of 0.63 mWh cm^?2 and 1.43 mWh cm^?3, respectively. The all‐component extrusion‐based 3D printing offers a promising strategy for the fabrication of multiscale and multidimensional structures of various high‐energy‐density electrochemical energy storage devices.     

Hierarchical Carbide‐Derived Carbon Foams with Advanced Mesostructure as a Versatile Electrochemical Energy‐Storage Material

Highly porous carbide‐derived carbon (CDC) mesofoams (DUT‐70) are prepared by nanocasting of mesocellular silica foams with a polycarbosilane precursor. Ceramic conversion followed by silica removal and high‐temperature chlorine treatment yields CDCs with a hierarchical micro‐mesopore arrangement. This new type of polymer‐based CDC is characterized by specific surface areas as high as 2700 m² g^?1, coupled with ultrahigh micro‐ and mesopore volumes up to 2.6 cm³ g^?1. The relationship between synthesis conditions and the properties of the resulting carbon materials is described in detail, allowing precise control of the properties of DUT‐70. Since the hierarchical pore system ensures both efficient mass transfer and high capacities, the novel CDC shows outstanding performance as an electrode material in electrochemical double‐layer capacitors (EDLCs) with specific capacities above 240 F g^?1 when measured in a symmetrical two‐electrode configuration. Remarkable capacities of 175 F g^?1 can be retained even at high current densities of 20 A g^?1 as a result of the enhanced ion‐transport pathways provided by the cellular mesostructure. Moreover, DUT‐70 can be infiltrated with sulfur and host the active material in lithium–sulfur battery cathodes. Reversible capacities of 790 mAh g^?1 are achieved at a current rate of C/10 after 100 cycles, which renders DUT‐70 an ideal support material for electrochemical energy‐storage applications.     

High Performance,Flexible, Solid‐State Supercapacitors Based on a Renewable and Biodegradable Mesoporous Cellulose Membrane

A flexible, transparent, and renewable mesoporous cellulose membrane (mCel‐membrane) featuring uniform mesopores of ≈24.7 nm and high porosity of 71.78% is prepared via a facile and scalable solution‐phase inversion process. KOH‐saturated mCel‐membrane as a polymer electrolyte demonstrates a high electrolyte retention of 451.2 wt%, a high ionic conductivity of 0.325 S cm^?1, and excellent mechanical flexibility and robustness. A solid‐state electric double layer capacitor (EDLC) using activated carbon as electrodes, the KOH‐saturated mCel‐membrane as a polymer electrolyte exhibits a high capacitance of 110 F g^?1 at 1.0 A g^?1, and long cycling life of 10 000 cycles with 84.7% capacitance retention. Moreover, a highly integrated planar‐type micro‐supercapacitor (MSC) can be facilely fabricated by directly depositing the electrode materials on the mCel‐membrane‐based polymer electrolyte without using complicated devices. The resulting MSC exhibits a high areal capacitance of 153.34 mF cm^?2 and volumetric capacitance of 191.66 F cm^?3 at 10 mV s^?1, representing one of the highest values among all carbon‐based MSC devices. These findings suggest that the developed renewable, flexible, mesoporous cellulose membrane holds great promise in the practical applications of flexible, solid‐state, portable energy storage devices that are not limited to supercapacitors.     

All‐Printed MnHCF‐MnOx‐Based High‐Performance Flexible Supercapacitors

Here, a simple active materials synthesis method is presented that boosts electrode performance and utilizes a facile screen‐printing technique to prepare scalable patterned flexible supercapacitors based on manganese hexacyanoferrate‐manganese oxide and electrochemically reduced graphene oxide electrode materials (MnHCF‐MnO_x/ErGO). A very simple in situ self‐reaction method is developed to introduce MnO_x pseudocapacitor material into the MnHCF system by using NH₄F. This MnHCF‐MnO_x electrode materials can deliver excellent capacitance of 467 F g^?1 at a current density of 1 A g^?1, which is a 2.4 times capacitance increase compared to MnHCF. In addition a printed, patterned, flexible MnHCF‐MnO_x/ErGO supercapacitor is fabricated, showing a remarkable areal capacitance of 16.8 mF cm^?2 and considerable energy and power density of 0.5 mWh cm^?2 and 0.0023 mW cm^?2, respectively. Furthermore, the printed patterned flexible supercapacitors also exhibit exceptional flexibility, and the capacitance remains stable, even while bending to various angles (60°, 90°, and 180°) and for 100 cycles. The flexible supercapacitor arrays integrated by multiple prepared single supercapacitors can power various LEDs even in the bent states. This approach offers promising opportunities for the development of printable energy storage materials and devices with high energy density, large scalability, and excellent flexibility.     

High‐Performance and Breathable Polypyrrole Coated Air‐Laid Paper for Flexible All‐Solid‐State Supercapacitors

High‐performance, breathable, conductive, and flexible polypyrrole (PPy) coated paper electrodes are prepared by an interfacial polymerization method using air‐laid paper as a substrate. Owing to the synergistic effect of superior electrical conductivity, high wettability, and the porous architecture, the prepared electrode not only shows an outstanding specific capacitance and rate abilities (3100 and 2579 mF cm^?2 at 1 and 20 mA cm^?2 for a PPy coated paper electrode), but also exhibits excellent flexibility, wearability, and breathability. Based on these superior features, an all‐solid‐state supercapacitor assembled with the PPy coated paper electrodes shows an outstanding energy density of 62.4 µW h cm^?2, remarkable air permeability and excellent flexibility to sustain various deformations. Furthermore, large‐scale fabrication of conductive flexible paper electrode can be easily achieved through this method. Therefore, this work offers a new vision for flexible energy storage.     

Phase Transformation Induced Capacitance Activation for 3D Graphene‐CoO Nanorod Pseudocapacitor

Development of a pseudocapacitor over the integration of metal oxide on carbonaceous materials is a promising step towards energy storage devices with high energy and power densities. Here, a self‐assembled cobalt oxide (CoO) nanorod cluster on three‐dimensional graphene (CoO‐3DG) is synthesized through a facile hydrothermal method followed by heat treatment. As an additive‐free electrode, CoO‐3DG exhibits good electrochemical performance. Compared with CoO nanorod clusters grown on Ni foam (i.e., CoO‐Ni, ≈680 F g^?1 at 1 A g^?1 and ≈400 F g^?1 at 20 A g^?1), CoO‐3DG achieves much higher capacitance (i.e., ≈980 F g^?1 at 1 A g^?1 and ≈600 F g^?1 at 20 A g^?1) with excellent cycling stability of 103% retention of specific capacitance after 10 000 cycles. Furthermore, it shows an interesting activation process and instability with a redox reaction for CoO. In addition, the phase transformation from CoO nanorods to Co₃O₄ nanostructures was observed and investigated after charge and discharge process, which suggests the activation kinetics and the phase transformable nature of CoO based nanostructure. These observations demonstrate phase transformation with morphological change induced capacitance increasement in the emergent class of metal oxide materials for electrochemical energy storage device.     

Hydrous RuO2‐Decorated MXene Coordinating with Silver Nanowire Inks Enabling Fully Printed Micro‐Supercapacitors with Extraordinary Volumetric Performance

The fabrication of fully printable, flexible micro‐supercapacitors (MSCs) with high energy and power density remains a significant technological hurdle. To overcome this grand challenge, the 2D material MXene has garnered significant attention for its application, among others, as a printable electrode material for high performing electrochemical energy storage devices. Herein, a facile and in situ process is proposed to homogeneously anchor hydrous ruthenium oxide (RuO₂) nanoparticles on Ti₃C₂T_x MXene nanosheets. The resulting RuO₂@MXene nanosheets can associate with silver nanowires (AgNWs) to serve as a printable electrode with micrometer‐scale resolution for high performing, fully printed MSCs. In this printed nanocomposite electrode, the RuO₂ nanoparticles contribute high pseudocapacitance while preventing the MXene nanosheets from restacking, ensuring an effective ion highway for electrolyte ions. The AgNWs coordinate with the RuO₂@MXene to guarantee the rheological property of the electrode ink, and provide a highly conductive network architecture for rapid charge transport. As a result, MSCs printed from the nanocomposite inks demonstrate volumetric capacitances of 864.2 F cm^?3 at 1 mV s^?1, long‐term cycling performance (90% retention after 10 000 cycles), good rate capability (304.0 F cm^?3 at 2000 mV s^?1), outstanding flexibility, remarkable energy (13.5 mWh cm^?3) and power density (48.5 W cm^?3).     

Pseudocapacitive Charge Storage in Thick Composite MoS2 Nanocrystal‐Based Electrodes

A synthesis methodology is demonstrated to produce MoS₂ nanoparticles with an expanded atomic lamellar structure that are ideal for Faradaic‐based capacitive charge storage. While much of the work on MoS₂ focuses on the high capacity conversion reaction, that process is prone to poor reversibility. The pseudocapacitive intercalation‐based charge storage reaction of MoS₂ is investigated, which is extremely fast and highly reversible. A major challenge in the field of pseudocapacitive‐based energy storage is the development of thick electrodes from nanostructured materials that can sustain the fast inherent kinetics of the active nanocrystalline material. Here a composite electrode comprised of a poly(acrylic acid) binder, carbon fibers, and carbon black additives is utilized. These electrodes deliver a specific capacity of 90 mAh g^?1 in less than 20 s and can be cycled 3000 times while retaining over 80% of the original capacity. Quantitative kinetic analysis indicates that over 80% of the charge storage in these MoS₂ nanocrystals is pseudocapacitive. Asymmetric full cell devices utilizing a MoS₂ nanocrystal‐based electrode and an activated carbon electrode achieve a maximum power density of 5.3 kW kg^?1 (with 6 Wh kg^?1 energy density) and a maximum energy density of 37 Wh kg^?1 (with 74 W kg^?1power density).     

Novel Metal@Carbon Spheres Core–Shell Arrays by Controlled Self‐Assembly of Carbon Nanospheres: A Stable and Flexible Supercapacitor Electrode

The high performance of electrochemical energy‐storage devices relies largely on scrupulous design of nanoarchitectures and smart hybridization of bespoke active materials. Carbon nanopsheres (CNSs) are widely used for energy storage and conversion devices. Here, the directional assembly of CNSs on a vertical‐standing metal scaffold into a core/shell array structure is reported. The method uses a three‐step all‐solution synthesis strategy (chemical bath deposition, electrodeposition, and hydrothermal) and begins from ZnO microrod arrays as a sacrificial template. The self‐assembly of CNSs can be correlated to a simultaneous etching effect to the ZnO accompanying the polymerization of glucose precursor. The Ni microtube/CNSs arrays are selected as an example for structural and electrochemical characterizations. The novel type of metal/CNSs arrays is demonstrated to be a highly stable electrode for supercapacitors. The electrodes of metal/CNSs arrays are assembled into symmetric supercapacitors and exhibit high capacitances of 227 F g^?1 (at 2.5 A g^?1) and an outstanding cycling stability with capacitance retention of 97% after 40 000 cycles.     

Amphicharge‐Storable Pyropolymers Containing Multitiered Nanopores

In this study, hierarchically nanoporous pyropolymers (HN‐PPs) including numerous redox‐active heteroatoms are fabricated from polyaniline nanotubes by heating with KOH. In the large operating voltage range 1.0–4.8 V versus Li⁺/Li, HN‐PPs store amphicharges by a pseudocapacitive manner of Li‐ion (mainly <3.0 V) and electrochemical double layer formation of anion (primarily >3.0 V). Through these surface‐driven charge storage behaviors, HN‐PPs achieve a significantly high specific capacity of ≈460 mA h g^?1 at 0.5 A g^?1, maintaining specific capacities of 140 mA h g^?1 at a high specific current of 30 A g^?1 and 305 mA h g^?1 after 2000 cycles at 3 A g^?1. Furthermore, asymmetric energy storage devices based on HN‐PPs deliver a high specific energy of 265 W h kg^?1 and high specific power of 5081 W kg^?1 with long‐term cycling performance.     

Utilizing Waste Cable Wires for High‐Performance Fiber‐Based Hybrid Supercapacitors: An Effective Approach to Electronic‐Waste Management

In recent years, electronic waste (e‐waste) such as old cable wires, fans, circuit boards, etc., can be often seen in large piles of leftover in dumping yards. Employing these e‐waste sources for energy storage devices not only increases the economic value but also decreases the reliance on fossil fuels. In this context, waste cable wires are utilized to obtain precious copper (Cu) fibers and used as a cost‐effective current collector for the fabrication of fiber‐based hybrid supercapacitor (FHSC). With the braided Cu fibers, forest‐like nickel oxide nanosheet grafted carbon nanotube coupled copper oxide nanowire arrays (NiO NSs@CNTs@CuO NWAs/Cu fibers) are designed via simple wet‐chemical approaches. As a battery‐type material, the forest‐like NiO NSs@CNTs@CuO NWAs/Cu fiber electrode shows superior electrochemical properties including high specific capacity (230.48 mA h g^?1) and cycling stability (82.72%) in aqueous alkaline electrolyte. Moreover, a solid‐state FHSC is also fabricated using forest‐like NiO NSs@CNTs@CuO NWAs/Cu fibers as a positive electrode and activated carbon coated carbon fibers as a negative electrode with a gel electrolyte, which also shows a higher energy and power densities of 26.32 W h kg^?1 and 1218.33 W kg^?1, respectively. The flexible FHSC is further employed as an energy source for various electronic gadgets, demonstrating its suitability for wearable applications.     

Achieving Ultrahigh Energy Densities of Supercapacitors with Porous Titanium Carbide/Boron‐Doped Diamond Composite Electrodes

The energy densities of most supercapacitors (SCs) are low, hindering their practical applications. To construct SCs with ultrahigh energy densities, a porous titanium carbide (TiC)/boron‐doped diamond (BDD) composite electrode is synthesized on a titanium plate that is pretreated using a plasma electrolytic oxidation (PEO) technique. The porous and nanometer‐thick TiO₂ layer formed during PEO process prevents the formation of brittle titanium hydride and enhances the BDD growth during chemical vapor deposition processes. Meanwhile, the in situ conversion of TiO₂ into TiC is achieved. Combination of this capacitor electrode with soluble redox electrolytes leads to the fabrication of high‐performance SCs in both aqueous and organic solutions. In 0.05 m Fe(CN)₆^3?/4? + 1 m Na₂SO₄ aqueous solution, the capacitance is as high as 46.3 mF cm^?2 at a current density of 1 mA cm^?2; this capacitance remains 92% of its initial value even after 10 000 charge/discharge cycles; the energy density is up to 47.4 Wh kg^?1 at a power density of 2236 W kg^?1. The performance of constructed SCs is superior to most available SCs and some electrochemical energy storage devices like batteries. Such a porous capacitor electrode is thus promising for the construction of high‐performance SCs for practical applications.     

High‐Performance Fiber‐Shaped All‐Solid‐State Asymmetric Supercapacitors Based on Ultrathin MnO2 Nanosheet/Carbon Fiber Cathodes for Wearable Electronics

Flexible fiber‐shaped supercapacitors have shown great potential in portable and wearable electronics. However, small specific capacitance and low operating voltage limit the practical application of fiber‐shaped supercapacitors in high energy density devices. Herein, direct growth of ultrathin MnO₂ nanosheet arrays on conductive carbon fibers with robust adhesion is exhibited, which exhibit a high specific capacitance of 634.5 F g^?1 at a current density of 2.5 A g^?1 and possess superior cycle stability. When MnO₂ nanosheet arrays on carbon fibers and graphene on carbon fibers are used as a positive electrode and a negative electrode, respectively, in an all‐solid‐state asymmetric supercapacitor (ASC), the ASC displays a high specific capacitance of 87.1 F g^?1 and an exceptional energy density of 27.2 Wh kg^?1. In addition, its capacitance retention reaches 95.2% over 3000 cycles, representing the excellent cyclic ability. The flexibility and mechanical stability of these ASCs are highlighted by the negligible degradation of their electrochemical performance even under severely bending states. Impressively, as‐prepared fiber‐shaped ASCs could successfully power a photodetector based on CdS nanowires without applying any external bias voltage. The excellent performance of all‐solid‐state ASCs opens up new opportunity for development of wearable and self‐powered nanodevices in near future.