QTL mapping of fruit mineral contents provides new chances for molecular breeding of tomato nutritional traits

Key message

Agronomical characterization of a RIL population for fruit mineral contents allowed for the identification of QTL controlling these fruit quality traits, flanked by co-dominant markers useful for marker-assisted breeding.

Abstract

Tomato quality is a multi-variant attribute directly depending on fruit chemical composition, which in turn determines the benefits of tomato consumption for human health. Commercially available tomato varieties possess limited variability in fruit quality traits. Wild species, such as Solanum pimpinellifolium, could provide different nutritional advantages and can be used for tomato breeding to improve overall fruit quality. Determining the genetic basis of the inheritance of all the traits that contribute to tomato fruit quality will increase the efficiency of the breeding program necessary to take advantage of the wild species variability. A high-density linkage map has been constructed from a recombinant inbred line (RIL) population derived from a cross between tomato Solanum lycopersicum and the wild-relative species S. pimpinellifolium. The RIL population was evaluated for fruit mineral contents during three consecutive growing seasons. The data obtained allowed for the identification of main QTL and novel epistatic interaction among QTL controlling fruit mineral contents on the basis of a multiple-environment analysis. Most of the QTL were flanked by candidate genes providing valuable information for both tomato breeding for new varieties with novel nutritional properties and the starting point to identify the genes underlying these QTL, which will help to reveal the genetic basis of tomato fruit nutritional properties.

     

QTL mapping for bacterial wilt resistance in peanut (<Emphasis Type="Italic">Arachis hypogaea</Emphasis> L.)

Bacterial wilt (BW) caused by Ralstonia solanacearum is a serious, global, disease of peanut (Arachis hypogaea L.), but it is especially destructive in China. Identification of DNA markers linked to the resistance to this disease will help peanut breeders efficiently develop resistant cultivars through molecular breeding. A F₂ population, from a cross between disease-resistant and disease-susceptible cultivars, was used to detect quantitative trait loci (QTL) associated with the resistance to this disease in the cultivated peanut. Genome-wide SNPs were identified from restriction-site-associated DNA sequencing tags using next-generation DNA sequencing technology. SNPs linked to disease resistance were determined in two bulks of 30 resistant and 30 susceptible plants along with two parental plants using bulk segregant analysis. Polymorphic SSR and SNP markers were utilized for construction of a linkage map and for performing the QTL analysis, and a moderately dense linkage map was constructed in the F₂ population. Two QTL (qBW-1 and qBW-2) detected for resistance to BW disease were located in the linkage groups LG1 and LG10 and account for 21 and 12 % of the bacterial wilt phenotypic variance. To confirm these QTL, the F₈ RIL population with 223 plants was utilized for genotyping and phenotyping plants by year and location as compared to the F₂ population. The QTL qBW-1 was consistent in the location of LG1 in the F₈ population though the QTL qBW-2 could not be clarified due to fewer markers used and mapped in LG10. The QTL qBW-1, including four linked SNP markers and one SSR marker within 14.4-cM interval in the F₈, was closely related to a disease resistance gene homolog and was considered as a candidate gene for resistance to BW. QTL identified in this study would be useful to conduct marker-assisted selection and may permit cloning of resistance genes. Our study shows that bulk segregant analysis of genome-wide SNPs is a useful approach to expedite the identification of genetic markers linked to disease resistance traits in the allotetraploidy species peanut.     

Multi-environment QTL mapping reveals genetic architecture of fruit cracking in a tomato RIL <Emphasis Type="Italic">Solanum lycopersicum</Emphasis> × <Emphasis Type="Italic">S. pimpinellifolium</Emphasis> population

Key message

QTL and codominant genetic markers for fruit cracking have been identified in a tomato genetic map derived from a RIL population, providing molecular tools for marker-assisted breeding of this trait.

Abstract

In tomato, as well as in other fleshy fruits, one of the main disorders that widely limit quality and production is fruit cracking or splitting of the epidermis that is observed on the fruit skin and flesh at any stage of fruit growth and maturation. To elucidate the genetic basis of fruit cracking, a quantitative trait loci (QTL) analysis was conducted in a recombinant inbred line (RIL) population derived from a cross between tomato (Solanum lycopersicum) and the wild-relative species S. pimpinellifolium. The RIL population was evaluated for fruit cracking during three consecutive growing seasons. Construction of a high-density linkage map based on codominant markers, covering more than 1000 cM of the whole genome, led to the identification of both main and epistatic QTL controlling fruit cracking on the basis of a single-environment as well as multiple-environment analysis. This information will enhance molecular breeding for novel cracking resistant varieties and simultaneously assist the identification of genes underlying these QTL, helping to reveal the genetic basis of fruit cracking in tomato.

     

QTL mapping of domestication and diversifying selection related traits in round-fruited semi-wild Xishuangbanna cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L. var. <Emphasis Type="Italic">xishuangbannanesis</Emphasis>)

Key message

QTL analysis revealed 11 QTL underlying flowering time and fruit size variation in the semi-wild Xishuangbanna cucumber, of which, FT6.2 and FS5.2 played the most important roles in determining photoperiod-dependent flowering time and round-fruit shape, respectively.

Abstract

Flowering time and fruit size are two important traits in domestication and diversifying selection in cucumber, but their genetic basis is not well understood. Here we reported QTL mapping results on flowering time and fruit size with F₂ and F_2:3 segregating populations derived from the cross between WI7200, a small fruited, early flowering primitive cultivated cucumber and WI7167, a round-fruited, later flowering semi-wild Xishuangbanna (XIS) cucumber. A linkage map with 267 microsatellite marker loci was developed with 138 F₂ plants. Phenotypic data of male and female flowering time, fruit length and diameter and three other traits (mature fruit weight and number, and seedling hypocotyl length) were collected in multiple environments. Three flowering time QTL, FT1.1, FT5.1 and FT6.2 were identified, in which FT6.2 played the most important role in conferring less photoperiod sensitive early flowering during domestication whereas FT1.1 seemed more influential in regulating flowering time within the cultivated cucumber. Eight consensus fruit size QTL distributed in 7 chromosomes were detected, each of which contributed to both longitudinal and radial growth in cucumber fruit development. Among them, FS5.2 on chromosome 5 exhibited the largest effect on the determination of round fruit shape that was characteristic of the WI7167 XIS cucumber. Possible roles of these flowering time and fruit size QTL in domestication of cucumber and crop evolution of the semi-wild XIS cucumber, as well as the genetic basis of round fruit shape in cucumber are discussed.

     

Construction of an ultra-high density consensus genetic map,and enhancement of the physical map from genome sequencing in <Emphasis Type="Italic">Lupinus angustifolius</Emphasis>

Key message

An ultra-high density genetic map containing 34,574 sequence-defined markers was developed in Lupinus angustifolius. Markers closely linked to nine genes of agronomic traits were identified. A physical map was improved to cover 560.5 Mb genome sequence.

Abstract

Lupin (Lupinus angustifolius L.) is a recently domesticated legume grain crop. In this study, we applied the restriction-site associated DNA sequencing (RADseq) method to genotype an F₉ recombinant inbred line population derived from a wild type × domesticated cultivar (W × D) cross. A high density linkage map was developed based on the W × D population. By integrating sequence-defined DNA markers reported in previous mapping studies, we established an ultra-high density consensus genetic map, which contains 34,574 markers consisting of 3508 loci covering 2399 cM on 20 linkage groups. The largest gap in the entire consensus map was 4.73 cM. The high density W × D map and the consensus map were used to develop an improved physical map, which covered 560.5 Mb of genome sequence data. The ultra-high density consensus linkage map, the improved physical map and the markers linked to genes of breeding interest reported in this study provide a common tool for genome sequence assembly, structural genomics, comparative genomics, functional genomics, QTL mapping, and molecular plant breeding in lupin.

     

Quantitative trait loci analysis of melon (<Emphasis Type="Italic">Cucumis melo</Emphasis> L.) domestication-related traits

Key message

Loci on LGIV, VI, and VIII of melon genome are involved in the control of fruit domestication-related traits and they are candidate to have played a role in the domestication of the crop.

Abstract

The fruit of wild melons is very small (20–50 g) without edible pulp, contrasting with the large size and high pulp content of cultivated melon fruits. An analysis of quantitative trait loci (QTL) controlling fruit morphology domestication-related traits was carried out using an in vitro maintained F₂ population from the cross between the Indian wild melon “Trigonus” and the western elite cultivar ‘Piel de Sapo’. Twenty-seven QTL were identified in at least two out of the three field trials. Six of them were also being detected in BC1 and BC3 populations derived from the same cross. Ten of them were related to fruit morphological traits, 12 to fruit size characters, and 5 to pulp content. The Trigonus alleles decreased the value of the characters, except for the QTL at andromonoecious gene at linkage group (LG) II, and the QTL for pulp content at LGV. QTL genotypes accounted for a considerable degree of the total phenotypic variation, reaching up to 46%. Around 66% of the QTL showed additive gene action, 19% exhibited dominance, and 25% consisted of overdominance. The regions on LGIV, VI, and VIII included the QTL with more consistent and strong effects on domestication-related traits. QTLs on those regions were validated in BC2S1, BC2S2, and BC3 families, with “Trigonus” allele decreasing the fruit morphological traits in all cases. The validated QTL could represent loci involved in melon domestication, although further experiments as genomic variation studies across wild and cultivated genotypes would be necessary to confirm this hypothesis.

     

Bayesian QTL analyses using pedigreed families of an outcrossing species,with application to fruit firmness in apple

Key message

Proof of concept of Bayesian integrated QTL analyses across pedigree-related families from breeding programs of an outbreeding species. Results include QTL confidence intervals, individuals’ genotype probabilities and genomic breeding values.

Abstract

Bayesian QTL linkage mapping approaches offer the flexibility to study multiple full sib families with known pedigrees simultaneously. Such a joint analysis increases the probability of detecting these quantitative trait loci (QTL) and provide insight of the magnitude of QTL across different genetic backgrounds. Here, we present an improved Bayesian multi-QTL pedigree-based approach on an outcrossing species using progenies with different (complex) genetic relationships. Different modeling assumptions were studied in the QTL analyses, i.e., the a priori expected number of QTL varied and polygenic effects were considered. The inferences include number of QTL, additive QTL effect sizes and supporting credible intervals, posterior probabilities of QTL genotypes for all individuals in the dataset, and QTL-based as well as genome-wide breeding values. All these features have been implemented in the FlexQTL^? software. We analyzed fruit firmness in a large apple dataset that comprised 1,347 individuals forming 27 full sib families and their known ancestral pedigrees, with genotypes for 87 SSR markers on 17 chromosomes. We report strong or positive evidence for 14 QTL for fruit firmness on eight chromosomes, validating our approach as several of these QTL were reported previously, though dispersed over a series of studies based on single mapping populations. Interpretation of linked QTL was possible via individuals’ QTL genotypes. The correlation between the genomic breeding values and phenotypes was on average 90 %, but varied with the number of detected QTL in a family. The detailed posterior knowledge on QTL of potential parents is critical for the efficiency of marker-assisted breeding.     

A multiplexed set of microsatellite markers for discriminating <Emphasis Type="Italic">Acacia mangium</Emphasis>, <Emphasis Type="Italic">A. auriculiformis</Emphasis>, and their hybrid

In order to assist breeding and gene pool conservation in tropical Acacias, we aimed to develop a set of multipurpose SSR markers for use in both Acacia mangium and A. auriculiformis. A total of 51 SSR markers (developed in A. mangium and natural A. mangium x A. auriculiformis hybrid) were tested. A final set of 16 well-performing SSR markers were identified, six of which were species diagnostic. The markers were optimized for assay in four multiplex mixes and used to genotype range-wide samples of A. mangium, A. auriculiformis, and putative F₁ hybrids. Simulation analysis was used to investigate the power of the markers for identifying the pure species and their F₁, F₂, and backcross hybrids. The six species diagnostic markers were particularly powerful for detecting F₁ hybrids from pure species but could also discriminate the pure species from F₂ and backcross progenies in most cases (97 %). STRUCTURE analysis using all 16 markers was likewise able to distinguish these cross types and pure species sets. Both sets of markers had difficulties in distinguishing F₂ and backcross progenies. However, identifying F₁ from pure species is the current primary concern in countries where these species are planted. The SSR marker set also has direct application in DNA profiling (probability of identity?=?4.1?×?10^?13), breeding system analysis, and population genetics.     

Quantitative trait locus (QTL) analysis of fruit-quality traits for mandarin breeding in Japan

The improvement of fruit quality is an important objective in citrus breeding. Using an F₁ segregating population from a cross between citrus cultivars ‘Harehime’ (‘E647’—‘Kiyomi’ [Citrus unshiu Marcow. ‘Miyagawa Wase’ × Citrus sinensis (L.) Osbeck ‘Trovita’] × ‘Osceola’—a cultivar of clementine [Citrus clementina hort. ex Tanaka] × ‘Orland’ [Citrus paradisi Macfad. ‘Duncan’ × Citrus tangerina hort. ex Tanaka] × ‘Miyagawa Wase’) and ‘Yoshida’ ponkan (Citrus reticulata Blanco ‘Yoshida’), a SNP-based genetic linkage map was constructed and quantitative trait locus (QTL) mapping of four fruit-quality traits (fruit weight, sugar content, peel puffing, and water rot) was performed. The constructed genetic linkage map of ‘Harehime’ consisted of 442 single nucleotide polymorphisms (SNPs) on 9 linkage groups (LGs) and covered 635.8 cM of the genome, while that of ‘Yoshida’ ponkan consisted of 332 SNPs on 9 LGs and covered 892.9 cM of its genome. We identified four QTLs associated with fruit weight, one QTL associated with sugar content, three QTLs associated with peel puffing, and one QTL associated with water rot. For these QTL regions, we estimated the haplotypes of the crossed parents and verified the founding cultivars that these QTLs were originated from and their inheritance in descendant cultivars using pedigree information. QTLs identified in this study provide useful information for marker-assisted breeding of citrus in Japan.     

Identification and validation of QTL and their associated genes for pre-emergent metribuzin tolerance in hexaploid wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.)

Background

Herbicide tolerance is an important trait that allows effective weed management in wheat crops. Genetic knowledge of metribuzin tolerance in wheat is needed to develop new cultivars for the industry. Here, we evaluated metribuzin tolerance in a recombinant inbred line (RIL) mapping population derived from Synthetic W7984 and Opata 85 over two consecutive years to identify quantitative trait loci (QTL) contributing to the trait. Herbicide tolerance was measured by two chlorophyll traits, SPAD chlorophyll content index (CCI) and visual senescence score (SNS). The markers associated with major QTL from Synthetic W7984, positively contributing to reduced phytotoxic effects under herbicide treatment were validated in two F_3/4 recombinant inbred populations developed from crosses of Synthetic W7984?×?Westonia and Synthetic W7984?×?Lang.

Results

Composite interval mapping (CIM) identified four QTL, two on chromosome 4A and one each on chromosomes 2D and 1A. The chromosomal position of the two QTL mapped on 4A within 10 cM intervals was refined and validated by multiple interval mapping (MIM). The major QTL affecting both measures of tolerance jointly explained 42 and 45% of the phenotypic variation by percentage CCI reduction and SNS, respectively. The identified QTL have a pure additive effect. The metribuzin tolerant allele of markers, Xgwm33 and Xbarc343, conferred lower phytotoxicity and explained the maximum phenotypic variation of 28.8 and 24.5%, respectively. The approximate physical localization of the QTL revealed the presence of five candidate genes (ribulose-bisphosphate carboxylase, oxidoreductase (rbcS), glycosyltransferase, serine/threonine-specific protein kinase and phosphotransferase) with a direct role in photosynthesis and/or metabolic detoxification pathways.

Conclusion

Metribuzin causes photo-inhibition by interrupting electron flow in PSII. Consequently, chlorophyll traits enabled the measure of high proportion of genetic variability in the mapping population. The validated molecular markers associated with metribuzin tolerance mediating QTL may be used in marker-assisted breeding to select metribuzin tolerant lines. Alternatively, validated favourable alleles could be introgressed into elite wheat cultivars to enhance metribuzin tolerance and improve grain yield in dryland farming for sustainable wheat production.

     

Fine mapping and candidate gene analysis of <Emphasis Type="Italic">qFL-chr1</Emphasis>, a fiber length QTL in cotton

Key message

A fiber length QTL, qFL-chr1, was fine mapped to a 0.9 cM interval of cotton chromosome 1. Two positional candidate genes showed positive correlation between gene expression level and fiber length.

Abstract

Prior analysis of a backcross-self mapping population derived from a cross between Gossypium hirsutum L. and G. barbadense L. revealed a QTL on chromosome 1 associated with increased fiber length (qFL-chr1), which was confirmed in three independent populations of near-isogenic introgression lines (NIILs). Here, a single NIIL, R01-40-08, was used to develop a large population segregating for the target region. Twenty-two PCR-based polymorphic markers used to genotype 1672 BC₄F₂ plants identified 432 recombinants containing breakpoints in the target region. Substitution mapping using 141 informative recombinants narrowed the position of qFL-chr1 to a 1.0-cM interval between SSR markers MUSS084 and CIR018. To exclude possible effects of non-target introgressions on fiber length, different heterozygous BC₄F₃ plants introgressed between SSR markers NAU3384 and CGR5144 were selected to develop sub-NILs. The qFL-chr1 was further mapped at 0.9-cM interval between MUSS422 and CIR018 by comparisons of sub-NIL phenotype, and increased fiber length by ~1 mm. The 2.38-Mb region between MUSS422 and CIR018 in G. barbadense contained 19 annotated genes. Expression levels of two of these genes, GOBAR07705 (encoding 1-aminocyclopropane-1-carboxylate synthase) and GOBAR25992 (encoding amino acid permease), were positively correlated with fiber length in a small F₂ population, supporting these genes as candidates for qFL-chr1.

     

Discovery and introgression of the wild sunflower-derived novel downy mildew resistance gene <Emphasis Type="Italic">Pl</Emphasis><Subscript><Emphasis Type="Italic">19</Emphasis></Subscript> in confection sunflower (<Emphasis Type="Italic">Helianthus annuus</Emphasis> L.)

Key message

A new downy mildew resistance gene, Pl ₁₉ , was identified from wild Helianthus annuus accession PI 435414, introduced to confection sunflower, and genetically mapped to linkage group 4 of the sunflower genome.

Abstract

Wild Helianthus annuus accession PI 435414 exhibited resistance to downy mildew, which is one of the most destructive diseases to sunflower production globally. Evaluation of the 140 BC₁F_2:3 families derived from the cross of CMS CONFSCLB1 and PI 435414 against Plasmopara halstedii race 734 revealed that a single dominant gene controls downy mildew resistance in the population. Bulked segregant analysis conducted in the BC₁F₂ population with 860 simple sequence repeat (SSR) markers indicated that the resistance derived from wild H. annuus was associated with SSR markers located on linkage group (LG) 4 of the sunflower genome. To map and tag this resistance locus, designated Pl ₁₉ , 140 BC₁F₂ individuals were used to construct a linkage map of the gene region. Two SSR markers, ORS963 and HT298, were linked to Pl ₁₉ within a distance of 4.7 cM. After screening 27 additional single nucleotide polymorphism (SNP) markers previously mapped to this region, two flanking SNP markers, NSA_003564 and NSA_006089, were identified as surrounding the Pl ₁₉ gene at a distance of 0.6 cM from each side. Genetic analysis indicated that Pl ₁₉ is different from Pl ₁₇ , which had previously been mapped to LG4, but is closely linked to Pl ₁₇ . This new gene is highly effective against the most predominant and virulent races of P. halstedii currently identified in North America and is the first downy mildew resistance gene that has been transferred to confection sunflower. The selected resistant germplasm derived from homozygous BC₂F₃ progeny provides a novel gene for use in confection sunflower breeding programs.

     

Transfer and mapping of the heat tolerance component traits of <Emphasis Type="Italic">Aegilops speltoides</Emphasis> in tetraploid wheat <Emphasis Type="Italic">Triticum durum</Emphasis>

Aegilops speltoides is an important genetic resource for wheat improvement and has high levels of heat tolerance. A heat-tolerant accession of Ae. speltoides pau3809 was crossed with Triticum durum cv. PDW274, and BC₂F_4-6 backcross introgression lines (BILs) were developed, phenotyped for important physiological traits, genotyped using SSR markers and used for mapping the QTL governing heat tolerance component traits. A set of 90 BILs was selected from preliminary evaluation of a broader set of 262 BILs under heat stress. Phenotyping was conducted for physiological traits such as cell membrane thermostability, chlorophyll content, acquired thermotolerance, canopy temperature and stay green. Much variation for these traits was observed in random as well as selected sets of BILs, and comparison of the BILs with the recurrent parent showed improvement for these traits under normal as well as heat stress conditions, indicating that introgressions from Ae. speltoides might have led to the improvement in the heat tolerance potential of the BILs. Introgression profiling of the 90 BILs using SSR markers identified Ae. speltoides introgression on all the 14 chromosomes with introgressions observed on A as well as B genome chromosomes. QTL mapping identified loci for various heat tolerance component traits on chromosomes 2B, 3A, 3B, 5A, 5B and 7A at significant LOD scores and with phenotypic contributions varying from 11.1 to 28.7 % for different traits. The heat-tolerant BILs and QTL reported in the present study form a potential resource that can be used for wheat germplasm enhancement for heat stress tolerance.     

Genetic mapping of a major gene in triticale conferring resistance to bacterial leaf streak

Key message

A major gene conferring resistance to bacterial leaf streak was mapped to chromosome 5R in triticale.

Abstract

Bacterial leaf streak (BLS), caused by Xanthomonas translucens pv. undulosa (Xtu), is an important disease of wheat and triticale around the world. Although resistance to BLS is limited in wheat, several triticale accessions have high levels of resistance. To characterize the genetic basis of this resistance, we developed triticale mapping populations using a resistant accession (Siskiyou) and two susceptible accessions (UC38 and Villax St. Jose). Bulked segregant analysis in an F₂ population derived from the cross of Siskiyou × UC38 led to the identification of a simple sequence repeat (SSR) marker (XSCM138) on chromosome 5R that co-segregated with the resistance gene. The cross of Siskiyou × Villax St. Jose was advanced into an F_2:5 recombinant inbred line population and evaluated for BLS reaction. Genetic linkage maps on this population were assembled with markers generated using genotyping-by-sequencing as well as several SSR markers previously identified on 5R. Quantitative trait locus (QTL) mapping revealed a single major QTL on chromosome 5R, underlined by the same SSR marker as in the Siskiyou × UC38 population. The F₁ hybrids of the two crosses were highly resistant to BLS, indicating that resistance is largely dominant. This work will facilitate introgression of this rye-derived BLS resistance gene into the wheat genome by molecular marker-mediated chromosome engineering.

     

SSR-based genetic linkage map construction in pistachio using an interspecific F<Subscript>1</Subscript> population and QTL analysis for leaf and shoot traits

Pistachio is one of the most commercially important nut trees in the world. To characterize the genetic controls of horticultural traits and facilitate marker-assisted breeding in pistachio, we constructed an SSR-based linkage map using an interspecific F₁ population derived from a cross between the cultivar “Siirt” (Pistacia vera L.) and the monoecious Pa-18 genotype of Pistacia atlantica Desf. This population was also used for the first QTL analysis in pistachio on leaf and shoot characters. In total, 1312 SSR primers were screened, and 388 loci were successfully integrated into parental linkage maps. The Siirt maternal map contained 306 markers, while the “Pa-18” paternal map included 285 markers along the 15 linkage groups. The Siirt map spanned 1410.4 cM, with an average marker distance of 4.6 cM; the Pa-18 map covered 1362.5 cM with an average marker distance of 4.8 cM. Phenotypic data were collected during the growing seasons of 2015 and 2016 for four traits: leaf length (LL), leaf width (LW), leaf length/leaf width ratio (LWR), number of leaflet pairs (NLL), and young shoot color (YSC). A total of 17 QTLs were identified in the parental maps. Four QTLs for LL and LW were located on LG2 and LG4, while four QTLs for LWR ratio on LG13 and LG14, two QTLs for NLL and two QTLs for YSC were on LG7 and LG9, respectively, with similar positions in both parental maps. The SSR markers, linkage maps, and QTLs reported here will provide a valuable resource for future molecular and genetic studies in pistachio.     

QTL mapping for salt tolerance and domestication-related traits in Vigna marina subsp. oblonga,a halophytic species

Key message

QTL mapping in F ₂ population [ V. luteola × V. marina subsp. oblonga ] revealed that the salt tolerance in V. marina subsp. oblonga is controlled by a single major QTL.

Abstract

The habitats of beach cowpea (Vigna marina) are sandy beaches in tropical and subtropical regions. As a species that grows closest to the sea, it has potential to be a gene source for breeding salt-tolerant crops. We reported here for the first time, quantitative trait loci (QTLs) mapping for salt tolerance in V. marina. A genetic linkage map was constructed from an F₂ population of 120 plants derived from an interspecific cross between V. luteola and V. marina subsp. oblonga. The map comprised 150 SSR markers. The markers were clustered into 11 linkage groups spanning 777.6 cM in length with a mean distance between the adjacent markers of 5.59 cM. The F_2:3 population was evaluated for salt tolerance under hydroponic conditions at the seedling and developmental stages. Segregation analysis indicated that salt tolerance in V. marina is controlled by a few genes. Multiple interval mapping consistently identified one major QTL which can explain about 50 % of phenotypic variance. The flanking markers may facilitate transfer of the salt tolerance allele from V. marina subsp. oblonga into related Vigna crops. The QTL for domestication-related traits from V. marina are also discussed.     

A major QTL conditioning salt tolerance in S-100 soybean and descendent cultivars

Deployment of salt tolerant cultivars is an effective approach to minimize yield loss in a saline soil. In soybean, Glycine max (L.) Merr., substantial genetic variation exists for salt response. However, breeding for salt tolerance is hampered because no economically viable screening method has been developed for practical breeding. To facilitate the development of an effective screening method for salt tolerance in soybean, the present study was conducted to determine the heritability of salt tolerance and to identify associated quantitative trait loci (QTL). F_2:5 lines from the cross of S-100 (salt tolerant) × Tokyo (salt sensitive) were evaluated in a saline field in Hyde County, N.C., USA, in 1999 and in a greenhouse located in Raleigh, N.C., USA, in 2001. S-100 and Tokyo are ancestors of popular soybean cultivars released for the southern USA. The visual salt tolerance ratings of the F_2:5 lines ranged from 0 (complete death) to 5 (normal healthy appearance). The entry-mean heritability for salt tolerance was 0.85, 0.48, and 0.57 in the field (four replications), greenhouse (two replications), and combined environments, respectively. The genotypic correlation between field and greenhouse ratings was 0.55, indicating reasonably good agreement between the two screening environments. To identify QTL associated with salt tolerance, each line was characterized with RFLP markers and an initial QTL single-factor analysis was completed. These results were used to identify genomic regions associated with the trait and to saturate the selected genomic regions with SSR markers to improve mapping precision. Subsequently, a major QTL for salt tolerance was discovered near the Sat_091 SSR marker on linkage group (LG) N, accounting for 41, 60, and 79% of the total genetic variation for salt tolerance in the field, greenhouse, and combined environments, respectively. The QTL allele associated with tolerance was derived from S-100. Pedigree tracking was used to examine the association between the salt tolerance QTL and flanking SSR marker alleles in U.S. cultivars descended from S-100 or Tokyo through 60 years of breeding. The presence of alleles from S-100 at the Sat_091 and Satt237 marker loci was always associated with salt tolerance in descendants. Alleles from Tokyo for these same markers were generally associated with salt sensitivity in descendent cultivars. The strong relationship between the SSR marker alleles and salt tolerance suggests that these markers could be used for marker-assisted selection in commercial breeding.An erratum to this article can be found at     

QTL mapping and comparative genome analysis of agronomic traits including grain yield in winter rye

Key message

Genetic diversity in elite rye germplasm as well as F _2:3 testcross design enables fast QTL mapping to approach genes controlling grain yield, grain weight, tiller number and heading date in rye hybrids.

Abstract

Winter rye (Secale cereale L.) is a multipurpose cereal crop closely related to wheat, which offers the opportunity for a sustainable production of food and feed and which continues to emerge as a renewable energy source for the production of bioethanol and biomethane. Rye contributes to increase agricultural crop species diversity particularly in Central and Eastern Europe. In contrast to other small grain cereals, knowledge on the genetic architecture of complex inherited, agronomic important traits is yet limited for the outbreeding rye. We have performed a QTL analysis based on a F_2:3 design and testcross performance of 258 experimental hybrids in multi-environmental field trials. A genetic linkage map covering 964.9 cM based on SSR, conserved-orthologous set (COS), and mixed-phase dominant DArT markers allowed to describe 22 QTL with significant effects for grain yield, heading date, tiller number, and thousand grain weight across seven environments. Using rye COS markers, orthologous segments for these traits have been identified in the rice genome, which carry cloned and functionally characterized rice genes. The initial genome scan described here together with the existing knowledge on candidate genes provides the basis for subsequent analyses of the genetic and molecular mechanisms underlying agronomic important traits in rye.