Environmental Damage Assessment of Carbon Capture and Storage

An end‐point life cycle impact assessment is used to evaluate the damages of electricity generation from fossil fuel‐based power plants with carbon dioxide capture and storage (CCS) technology. Pulverized coal (PC), integrated gasification combined cycle (IGCC), and natural gas combined cycle (NGCC) power plants are assessed for carbon dioxide (CO₂) capture, pipeline transport, and storage in a geological formation. Results show that the CCS systems reduce the climate change‐related damages but increase the damages from toxicity, acidification, eutrophication, and resource consumption. Based on the currently available damage calculation methods, it is concluded that the benefit of reducing damage from climate change is larger than the increases in other damage categories, such as health effects from particulates or toxic chemicals. CCS significantly reduces the overall environmental damage, with a net reduction of 60% to 70% in human health damage and 65% to 75% in ecosystem damage. Most of the damage is due to fuel production and combustion processes. The energy and infrastructure demands of CCS cause increases in the depletion of natural resources by 33% for PC, 19% for IGCC, and 18% for NGCC power plants, mostly due to increased fossil fuel consumption.     

Lifecycle climate impact and primary energy use of electric and biofuel cargo trucks

Heavy trucks contribute significantly to climate change, and in 2020 were responsible for 7% of total Swedish GHG emissions and 5% of total global CO₂ emissions. Here we study the full lifecycle of cargo trucks powered by different energy pathways, comparing their biomass feedstock use, primary energy use, net biogenic and fossil CO₂ emission and cumulative radiative forcing. We analyse battery electric trucks with bioelectricity from stand-alone or combined heat and power (CHP) plants, and pathways where bioelectricity is integrated with wind and solar electricity. We analyse trucks operated on fossil diesel fuel and on dimethyl ether (DME). All energy pathways are analysed with and without carbon capture and storage (CCS). Bioelectricity and DME are produced from forest harvest residues. Forest biomass is a limited resource, so in a scenario analysis we allocate a fixed amount of biomass to power Swedish truck transport. Battery lifespan and chemistry, the technology level of energy supply, and the biomass source and transport distance are all varied to understand how sensitive the results are to these parameters. We find that pathways using electricity to power battery electric trucks have much lower climate impacts and primary energy use, compared to diesel- and DME-based pathways. The pathways using bioelectricity with CCS result in negative emissions leading to global cooling of the earth. The pathways using diesel and DME have significant and very similar climate impact, even with CCS. The robust results show that truck electrification and increased renewable electricity production is a much better strategy to reduce the climate impact of cargo transport than the adoption of DME trucks, and much more primary energy efficient. This climate impact analysis includes all fossil and net biogenic CO₂ emissions as well as the timing of these emissions. Considering only fossil emissions is incomplete and could be misleading.     

The role of bioenergy for global deep decarbonization: CO2 removal or low‐carbon energy?

Bioenergy is expected to have a prominent role in limiting global greenhouse emissions to meet the climate change target of the Paris Agreement. Many studies identify negative emissions from bioenergy generation with carbon capture and storage (BECCS) as its key contribution, but assume that no other CO₂ removal technologies are available. We use a global integrated assessment model, TIAM‐UCL, to investigate the role of bioenergy within the global energy system when direct air capture and afforestation are available as cost‐competitive alternatives to BECCS. We find that the presence of other CO₂ removal technologies does not reduce the pressure on biomass resources but changes the use of bioenergy for climate mitigation. While we confirm that when available BECCS offers cheaper decarbonization pathways, we also find that its use delays the phase‐out of unabated fossil fuels in industry and transport. Furthermore, it displaces renewable electricity generation, potentially increasing the likelihood of missing the Paris Agreement target. We found that the most cost‐effective solution is to invest in a basket of CO₂ removal technologies. However, if these technologies rely on CCS, then urgent action is required to ramp up the necessary infrastructure. We conclude that a sustainable biomass supply is critical for decarbonizing the global energy system. Since only a few world regions carry the burden of producing the biomass resource and store CO₂ in geological storage, adequate international collaboration, policies and standards will be needed to realize this resource while avoiding undesired land‐use change.     

The Potential Applications of Nanoporous Materials for the Adsorption,Separation, and Catalytic Conversion of Carbon Dioxide

Carbon capture and storage (CCS) technologies aiming at tackling CO₂ emission have attracted much attention from scientists of various backgrounds. Most CCS systems require an efficient adsorbent to remove CO₂ from sources such as fossil fuels (pre‐combustion) or flue gas from power generation (post‐combustion). Research on developing efficient adsorbents with a substantial capacity, good stability and recyclability has grown rapidly in the past decade. Because of their high surface area, highly porous structure, and high stability, various nanoporous materials have been viewed as good candidates for this challenging task. Here, recent developments in several classes of nanoporous materials, such as zeolites, metal organic frameworks (MOFs), mesoporous silicas, carbon nanotubes, and organic cage frameworks, for CCS are examined and potential future directions for CCS technology are discussed. The main criteria for a sustainable CO₂ adsorbent for industrial use are also rationalized. Moreover, catalytic transformations of CO₂ to other chemical species using nanoporous catalysts and their potential for large scale carbon capture and utilization (CCU) processes are also discussed. Application of CCU technologies avoids any potential hazard associated with CO₂ reservoirs and allows possible recovery of some running cost for CO₂ capture by manufacturing valuable chemicals.     

Life cycle assessment of an offshore grid interconnecting wind farms and customers across the North Sea

Purpose

This study aims to contribute to an improved understanding of the environmental implications of offshore power grid and wind power development pathways. To achieve this aim, we present two assessments. First, we investigate the impacts of a North Sea power grid enabling enhanced trade and integration of offshore wind power. Second, we assess the benefit of the North Sea grid and wind power through a comparison of scenarios for power generation in affected countries.

Methods

The grid scenario explored in the first assessment is the most ambitious scenario of the Windspeed project and is the result of cost minimization analysis using a transmission-expansion-planning model. We develop a hybrid life cycle inventory for array cables; high voltage, direct current (HVDC) links; and substations. The functional unit is 1 kWh of electricity transmitted. The second assessment compares two different energy scenarios of Windspeed for the North Sea and surrounding countries. Here, we utilize a life cycle inventory for offshore grid components together with an inventory for a catalog of power generation technologies from Ecoinvent and couple these inventories with grid configurations and electricity mixes determined by the optimization procedure in Windspeed.

Results and discussion

Developing, operating, and dismantling the grid cause emissions of 2.5 g CO₂-Eq per kWh electricity transmission or 36 Mt CO₂-Eq in total. HVDC cables are the major cause of environmental damage, causing, for example, half of total climate change effects. The next most important contributors are substations and array cabling used in offshore wind parks. Toxicity and eutrophication effects stem largely from leakages from disposed copper and iron mine tailings and overburden. Results from the comparison of two scenarios demonstrate a substantial environmental benefit from the North Sea grid extension and the associated wind power development compared with an alternative generation of electricity from fossil fuels. Offshore grid and wind power, however, entail an increased use of metals and, hence, a higher metal depletion indicator.

Conclusions

We present the first life cycle assessment of a large offshore power grid, using the results of an energy planning model as input. HVDC links are the major cause of environmental damage. There are differences across impact categories with respect to which components or types of activities that are responsible for damage. The North Sea grid and wind power are environmentally beneficial by an array of criteria if displacing fossil fuels, but cause substantial metal use.     

The Greenhouse Gas Balance of a Dairy Farm as Influenced by the Uptake of Biogas Production

The production of energy crops for farm-scale anaerobic digestion (AD) can affect emissions of greenhouse gases (GHG) in a number of ways. Some examples are: fugitive CH₄ emissions from the digester and the storage of the digestate, emissions of N₂O from soil and emissions of CO₂ from farm machinery. Moreover, uptake of AD may be accompanied by changes in the way the farm is operated, which may affect GHG emissions. The scale of these emissions was assessed from published data for the biogas feedstocks cattle slurry and grass silage. Emissions were compared to references representing current farm operation and energy generation by fossil fuels. Feeding the digester with cattle slurry for the entire year did not result in reduced emissions due to relatively high emissions from stored raw slurry in summer. If grass was used for digester feedstock, the level of N₂O emissions from the crop was the most important factor for the GHG balance of farm-scale AD. If N₂O emissions were low, biogas realised substantial savings of GHG in the order of 1 t CO₂ equivalents per hectare per year. At a high level of N₂O emissions, energy cropping might even result in increased GHG emissions compared to fossil fuels.     

Biohydrogen production from microalgae—Major bottlenecks and future research perspectives

The imprudent use of fossil fuels has resulted in high greenhouse gas (GHG) emissions, leading to climate change and global warming. Reduction in GHG emissions and energy insecurity imposed by the depleting fossil fuel reserves led to the search for alternative sustainable fuels. Hydrogen is a potential alternative energy carrier and is of particular interest because hydrogen combustion releases only water. Hydrogen is also an important industrial feedstock. As an alternative energy carrier, hydrogen can be used in fuel cells for power generation. Current hydrogen production mainly relies on fossil fuels and is usually energy and CO₂-emission intensive, thus the use of fossil fuel-derived hydrogen as a carbon-free fuel source is fallacious. Biohydrogen production can be achieved via microbial methods, and the use of microalgae for hydrogen production is outstanding due to the carbon mitigating effects and the utilization of solar energy as an energy source by microalgae. This review provides comprehensive information on the mechanisms of hydrogen production by microalgae and the enzymes involved. The major challenges in the commercialization of microalgae-based photobiological hydrogen production are critically analyzed and future research perspectives are discussed. Life cycle analysis and economic assessment of hydrogen production by microalgae are also presented.     

Conversion of CO2 into biomass by microalgae: how realistic a contribution may it be to significant CO2 removal?

Microalgae have been proposed as a CO₂ removal option to contribute to climate change avoidance and problems coming from the use of fossil fuels. However, even though microalgae can be used to fix CO₂ from air or flue gases, they do not permit long-term CO₂ storage because they are easily decomposed. On the other hand, microalgae can contribute to an enhancement in human sustainability by producing biofuels as an alternative to fossil fuels in addition to the production of other useful chemicals and commodities. Moreover, microalgae can contribute to enhancing the sustainability of waste treatment processes, reducing the energy consumed, and improving the recycling of nutrients contained within them. This paper reviews the potential contribution of these processes and the existing knowledge in these areas.     

Effect of Change of Forest Carbon Storage on Net Carbon Dioxide Balance of Wood Use for Energy in Japan

This study analyzed the net carbon dioxide (CO₂) emission reductions between 2005 and 2050 by using wood for energy under various scenarios of forest management and energy conversion technology in Japan, considering both CO₂ emission reductions from replacement of fossil fuels and changes in carbon storage in forests. According to our model, wood production for energy results in a significant reduction of carbon storage levels in forests (by 46% to 77% in 2050 from the 2005 level). Thus, the net CO₂ emission reduction when wood is used for energy becomes drastically smaller. Conventional tree production for energy increases net CO₂ emissions relative to preserving forests, but fast‐growing tree production may reduce net CO₂ emissions more than preserving forests does. When wood from fast‐growing trees is used to generate electricity with gas turbines, displacing natural gas, the net CO₂ emission reduction from the combination of fast‐growing trees and electricity generation with gas turbines is about 58% of the CO₂ emission reduction from electricity generation from gas turbines alone in 2050, and an energy conversion efficiency of around 20% or more is required to obtain net reductions over the entire period until 2050. When wood is used to produce bioethanol, displacing gasoline, net reductions are realized after 2030, provided that heat energy is recovered from residues from ethanol production. These results show the importance of considering the change in carbon storage when estimating the net CO₂ emission reduction effect of the wood use for energy.     

Life cycle inventory for electricity generation in China

Background, Goal and Scope The objective of this study was to produce detailed a life cycle inventory (LCI) for the provision of 1 kWh of electricity to consumers in China in 2002 in order to identify areas of improvement in the industry. The system boundaries were processes in power stations, and the construction and operation of infrastructure were not included. The scope of this study was the consumption of fossil fuels and the emissions of air pollutants, water pollutants and solid wastes, which are listed as follows: (1) consumption of fossil fuels, including general fuels, such as raw coal, crude oil and natural gas, and the uranium used for nuclear power; (2) emissions of air pollutants from thermal power, hydropower and nuclear power plants; (3) emissions of water pollutants, including general water waste from fuel electric plants and radioactive waste fluid from nuclear power plants; (4) emissions of solid wastes, including fly ash and slag from thermal power plants and radioactive solid wastes from nuclear power plants. Methods Data were collected regarding the amount of fuel, properties of fuel and the technical parameters of the power plants. The emissions of CO₂, SO₂, NO_x, CH₄, CO, non-methane volatile organic compound (NMVOC), dust and heavy metals (As, Cd, Cr, Hg, Ni, Pb, V, Zn) from thermal power plants as well as fuel production and distribution were estimated. The emissions of CO₂ and CH₄ from hydropower plants and radioactive emissions from nuclear power plants were also investigated. Finally, the life cycle inventory for China’s electricity industry was calculated and analyzed. Results Related to 1 kWh of usable electricity in China in 2002, the consumption of coal, oil, gas and enriched uranium were 4.57E-01, 8.88E-03, 7.95E-03 and 9.03E-08 kg; the emissions of CO₂, SO₂, NO_x, CO, CH₄, NMVOC, dust, As, Cd, Cr, Hg, Ni, Pb, V, and Zn were 8.77E-01, 8.04E-03, 5.23E-03, 1.25E-03, 2.65E-03, 3.95E-04, 1.63E-02, 1.62E-06, 1.03E-08, 1.37E-07, 7.11E-08, 2.03E-07, 1.42E-06, 2.33E-06, and 1.94E-06 kg; the emissions of waste water, COD, coal fly ash, and slag were 1.31, 6.02E-05, 8.34E-02, and 1.87E-02 kg; and the emissions of inactive gas, halogen and gasoloid, tritium, non-tritium, and radioactive solid waste were 3.74E+01 Bq, 1.61E-01 Bq, 4.22E+01 Bq, 4.06E-02 Bq, and 2.68E-10 m³ respectively. Conclusions The comparison result between the LCI data of China’s electricity industry and that of Japan showed that most emission intensities of China’s electricity industry were higher than that of Japan except for NMVOC. Compared with emission intensities of the electricity industry in Japan, the emission intensities of CO₂ and Ni in China were about double; the emission intensities of NO_x, Cd, CO, Cr, Hg and SO₂ in China were more than 10 times that of Japan; and the emission intensities of CH₄, V, Pb, Zn, As and dust were more than 20 times. The reasons for such disparities were also analyzed. Recommendations and Perspectives To get better LCI for the electricity industry in China, it is important to estimate the life cycle emissions during fuel production and transportation for China. Another future improvement could be the development of LCIs for construction and operation of infrastructure such as factory buildings and dams. It would also be important to add the information about land use for hydropower.     

碳一气体生物转化中的产乙酸菌改造与发酵工艺优化

当前的线性经济发展模式依赖化石能源且增加二氧化碳的排放,加剧全球变暖和环境污染。因此,亟需开发碳捕获和利用的技术,建立循环经济。利用产乙酸菌进行碳一气体(一氧化碳和二氧化碳)转化是一项前景广阔的技术,具有较高的碳源灵活性和产物选择性,能够合成多种化学品和燃料。本文聚焦产乙酸菌在碳一气体转化过程中的生理代谢机制、遗传和代谢工程改造、发酵工艺优化以及提升碳原子经济性等方面的研究进展,以期为产乙酸菌气体发酵的工业规模放大及“负碳”生产提供参考。     

Oxygen regulator element to reduce the climate changes: the oxygen users must pay those who produce it

The climate warming reduction needs an approach based on a regulator element which links the ecological and economical goals. The ecosystem services have become less effective because the production of water and CO₂ are faster than recycling it in biomass. The produced water with CO₂, during the oxidation of organic carbon thanks to the chemical reduction of oxygen, is often neglected and not mentioned by the scientific community. The water volume that results from the burning of fossil fuels increases annually with CO₂ emissions and is higher than thousands of billions of tons. This water increase affects water vapour levels and induces the risk of great floods and sea level rising. We suggest an ecolonomical (ecology and economy) integrative concept based on the use of oxygen, as a regulator, which links the burning of fuels that generate water and fossil CO₂ to photosynthesis that regenerates oxygen and biomass essential for our life. The ecolonomical quantitative rule claims that the oxygen users such as transportation services, manufacturers and power plants must pay those who produce it such as forest, agriculture and urban vegetation. The application of this rule should induce the restoring of natural ecosystems and agricultural practices thanks to the link between the urban services and the rural services.     

Life Cycle Assessment of Electric and Fuel Cell Vehicle Transport Based on Forest Biomass

Use of biomass‐based electricity and hydrogen in alternative transport could provide environmentally sustainable transport options with possible improvements in greenhouse gas balance. We perform a life cycle assessment of electric vehicle (EV) and fuel cell vehicle (FCV) powered by bioelectricity and biohydrogen, respectively, derived from Norwegian boreal forest biomass, considering the nonclimate neutrality of biological carbon dioxide (CO₂) emissions and alteration in surface albedo resulting from biomass harvesting—both with and without CO₂ capture and storage (CCS)—while benchmarking these options against EVs powered by the average European electricity mix. Results show that with due consideration of the countering effects from global warming potential (GWP) factors for biogenic CO₂ emissions and change in radiative forcing of the surface for the studied region, bioenergy‐based EVs and FCVs provide reductions of approximately 30%, as compared to the reference EV powered by the average European electricity mix. With CCS coupled to bioenergy production, the biomass‐based vehicle transport results in a net global warming impact reduction of approximately 110% to 120% (giving negative GWP and creating a climate‐cooling benefit from biomass use). Other environmental impacts vary from ?60% to +60%, with freshwater eutrophication showing maximum reductions (40% for the EV case and 60% for the FCV case) and photochemical oxidation showing a maximum increase (60% in the FCV value chain).     

Development of life cycle inventories for electricity grid mixes in Japan

Since most industrial processes consume electricity, it is quite important to develop reliable inventory data for electricity. There is, however, a problem that only a few figures concerning emissions related to electricity have been reported. In this work, process models of power plants were developed for the Japanese situation which simulate the mass flows and estimate the missing figures of emissions dependent on technical parameters of the plants and fuels. In Japan, electricity is supplied to the various regions by 10 electric companies. Therefore, life cycle inventories for the electricity grid mixes of the 10 electric companies in 1997 were developed. The functional unit is 1 kWh of electricity distributed to electricity users in each region. The emission of CO₂, SO₂, NO_k, CH₄, CO, non-methane volatile organic compound (NMVOC), dust (all particulates) and heavy metals (Ni, V, As, Cd, Cr, Hg, Pb, Zn) from power stations as well as those from fuel production and transport were investigated. Other pollutants into air, emissions to water, solid wastes, radiation and radioactive emissions from atomic power stations were not included due to a limitation of the available data. Direct CO₂ emissions related to 1 kWh of electricity distributed by companies ranged from 0.21 to 1.0 kg/kWh (average value: 0.38 kg/kWh). Direct emissions of SO₂ and NO_x from power stations related to 1 kWh of electricity are 2.5* 10^-4 and 2.2* 10^-4 kg/kWh on the average, respectively. SO₂ emissions calculated in this work were somehow large compared with those reported by electric companies. Detailed information concerning total sulfur content in oil consumed in each oil-fired power station are required for an exact calculation of SO₂ emissions from oil-fired power stations. In addition, the ratio of sulfur that goes into slag in combustion must be investigated further. The average amounts of CO, CH₄, NMVOC and dust emissions were 5.0*10^-5, 8.2*10^-6, 1.8*10^-5 and 6.8 * 10^-6 kg/kWh, respectively. Heavy metal emissions from power stations were on the order of 10^-9 to 10^-8 kg/kWh. Detailed information concerning heavy metal content in oil and coals consumed in fossil fuel power stations are further required for an improved assessment of heavy metal emissions. Contribution of fuel production and transport to total CO₂ emission was relatively small. On the other hand, contributions of fuel production and transport to total SO₂ and NO_x emissions were relatively large. In the case of CO, NMVOC and dust, emissions in fuel production and transport were predominant to total emissions. Heavy metal emissions into air during production and transport of fuels were on the order of 10/^-8 to 10^-9 kg/kWh.     

Environmental impacts and limitations of third‐generation biobutanol: Life cycle assessment of n‐butanol produced by genetically engineered cyanobacteria

Photosynthetic cyanobacteria have attracted interest as production organisms for third‐generation biofuels, where sunlight and CO₂ are used by microbes directly to synthesize fuel molecules. A particularly suitable biofuel is n‐butanol, and there have been several laboratory reports of genetically engineered photosynthetic cyanobacteria capable of synthesizing and secreting n‐butanol. This work evaluates the environmental impacts and cumulative energy demand (CED) of cyanobacteria‐produced n‐butanol through a cradle‐to‐grave consequential life cycle assessment (LCA). A hypothetical production plant in northern Sweden (area 1 ha, producing 5–85 m³ n‐butanol per year) was considered, and a range of cultivation formats and cellular productivity scenarios assessed. Depending on the scenario, greenhouse gas emissions (GHGe) ranged from 16.9 to 58.6 gCO₂eq/MJ_BuOH and the CED from 3.8 to 13 MJ/MJ_BuOH. Only with the assumption of a nearby paper mill to supply waste sources for heat and CO₂ was the sustainability requirement of at least 60% GHGe savings compared to fossil fuels reached, though placement in northern Sweden reduced energy needed for reactor cooling. A high CED in all scenarios shows that significant metabolic engineering is necessary, such as a carbon partitioning of >90% to n‐butanol, as well as improved light utilization, to begin to displace fossil fuels or even first‐ and second‐generation bioethanol.     

Competing uses of biomass for energy and chemicals: implications for long‐term global CO2 mitigation potential

Biomass is considered a low carbon source for various energy or chemical options. This paper assesses it's different possible uses, the competition between these uses, and the implications for long‐term global energy demand and energy system emissions. A scenario analysis is performed using the TIMER energy system model. Under baseline conditions, 170 EJ yr^?1 of secondary bioenergy is consumed in 2100 (approximately 18% of total secondary energy demand), used primarily in the transport, buildings and nonenergy (chemical production) sectors. This leads to a reduction of 9% of CO₂ emissions compared to a counterfactual scenario where no bioenergy is used. Bioenergy can contribute up to 40% reduction in emissions at carbon taxes greater than 500/tC. As higher CO₂ taxes are applied, bioenergy is increasingly diverted towards electricity generation. Results are more sensitive to assumptions about resource availability than technological parameters. To estimate the effectiveness of bioenergy in specific sectors, experiments are performed in which bioenergy is only allowed in one sector at a time. The results show that cross‐sectoral leakage and emissions from biomass conversion limit the total emission reduction possible in each sector. In terms of reducing emissions per unit of bioenergy use, we show that the use of bioelectricity is the most effective, especially when used with carbon capture and storage. However, this technology only penetrates at a high carbon price (>100/tC) and competition with transport fuels may limit its adoption.     

LCA of concrete and steel building frames

The effects on the external environment of seven concrete and steel building frames representative of present-day building technology in Sweden were analysed using LCA methodology. Objects of the study included frame construction and supplementary materials. Several-storey offices and dwellings were studied. The functional unit was defined as one average m² of floor area during the lifetime of the building. Inventory data were elaborated for concrete and steel production, the building site, service life, demolition and final disposal. Parameters included were raw material use, energy use, emissions to air, emissions to water and waste generation. The inventory results were presented and evaluated as such, in addition to an interpretation by using three quantitative impact assessment methods. Parameters that weighed heavily were use of fossil fuels, CO₂, electricity, SO_x ² NO_x ² alloy materials and waste, depending on what assessment method was used. Over the life cycle, building production from cradle to gate accounted for about the same contribution to total environmental loads as maintenance and replacement of heat losses through external walls during service life, whereas demolition and final disposal accounted for a considerably lower contribution.     

Toward a Carbon Dioxide Neutral Industrial Park

The industrial park of Herdersbrug (Brugge, Flanders, Belgium) comprises 92 small and medium‐sized enterprises, a waste‐to‐energy incinerator, and a power plant (not included in the study) on its site. To study the carbon dioxide (CO₂) neutrality of the park, we made a park‐wide inventory for 2007 of the CO₂ emissions due to energy consumption (electricity and fossil fuel) and waste incineration, as well as an inventory of the existing renewable electricity and heat generation. The definition of CO₂ neutrality in Flanders only considers CO₂ released as a consequence of consumption or generation of electricity, not the CO₂ emitted when fossil fuel is consumed for heat generation. To further decrease or avoid CO₂ emissions, we project and evaluate measures to increase renewable energy generation. The 21 kilotons (kt) of CO₂ emitted due to electricity consumption are more than compensated by the 25 kt of CO₂ avoided by generation of renewable electricity. Herdersbrug Industrial Park is thus CO₂ neutral, according to the definition of the Flemish government. Only a small fraction (6.6%) of the CO₂ emitted as a consequence of fossil fuel consumption (heat generation) and waste incineration is compensated by existing and projected measures for renewable heat generation. Of the total CO₂ emission (149 kt) due to energy consumption (electricity + heat generation) and waste incineration on the Herdersbrug Industrial Park in 2007, 70.5% is compensated by existing and projected renewable energy generated in the park. Forty‐seven percent of the yearly avoided CO₂ corresponds to renewable energy generated from waste incineration and biomass fermentation.     

A comparison of the global warming effects of wood fuels and fossil fuels taking albedo into account

Traditionally, wood fuels, like other bioenergy sources, have been considered carbon neutral because the amount of CO₂ released can be offset by CO₂ sequestration due to the regrowth of the biomass. Thus, until recently, most studies assigned a global warming potential (GWP) of zero to CO₂ generated by the combustion of biomass (biogenic CO₂). Moreover, emissions of biogenic CO₂ are usually not included in carbon tax and emissions trading schemes. However, there is now increasing awareness of the inadequacy of this way of treating bioenergy, especially bioenergy from boreal forests. Holtsmark (2014) recently quantified the GWP of biogenic CO₂ from slow‐growing forests (GWP_bio), finding it to be significantly higher than the GWP of fossil CO₂ when a 100 year time horizon was applied. Hence, the climate impact seems to be even higher for the combustion of slow‐growing biomass than for the combustion of fossil carbon in a 100 year timeframe. The present study extends the analysis of Holtsmark (2014) in three ways. First, it includes the cooling effects of increased surface reflectivity after harvest (albedo). Second, it includes a comparison with the potential warming impact of fossil fuels, taking the CO₂ emissions per unit of energy produced into account. Third, the study links the literature estimating GWP_bio and the literature dealing with the carbon debt, and model simulations estimating the payback time of the carbon debt are presented. The conclusion is that, also after these extensions of the analysis, bioenergy from slow‐growing forests usually has a larger climate impact in a 100 year timeframe than fossil oil and gas. Whether bioenergy performs better or worse than coal depends on a number of conditions.     

Use of Chlorella vulgaris for CO(2) mitigation in a photobioreactor

Carbon dioxide (CO₂) is a colorless gas that exists at a concentration of approximately 330 ppm in the atmosphere and is released in great quantities when fossil fuels are burned. The current flux of carbon out of fossil fuels is about 600 times greater than that into fossil fuels. With increased concerns about global warming and greenhouse gas emissions, there have been several approaches proposed for managing the levels of CO₂ emitted into the atmosphere. One of the most understudied methods for CO₂ mitigation is the use of biological processes in engineered systems such as photobioreactors. This research project describes the effectiveness of Chlorella vulgaris, used in a photobioreactor with a very short gas residence time, in sequestering CO₂ from an elevated CO₂ airstream. We evaluated a flow-through photobioreactor's operational parameters, as well as the growth characteristics of the C. vulgaris inoculum when exposed to an airstream with over 1850 ppm CO₂. When using dry weight, chlorophyll, and direct microscopic measurements, it was apparent that the photobioreactor's algal inoculum responded well to the elevated CO₂ levels and there was no build-up of CO₂ or carbonic acid in the photobioreactor. The photobioreactor, with a gas residence time of approximately 2 s, was able to remove up to 74% of the CO₂ in the airstream to ambient levels. This corresponded to a 63.9-g/m³/h bulk removal for the experimental photobioreactor. Consequently, this photobioreactor shows that biological processes may have some promise for treating point source emissions of CO₂ and deserve further study. Received 25 April 2002/ Accepted in revised form 27 July 2002