Rapid homogeneous lauroylation of wheat straw hemicelluloses under mild conditions

Hemicellulose-based hydrophobic biomaterials with degrees of substitution ranging from 0.46 to 1.54 were synthesized under mild conditions in homogeneous media (N,N-dimethylformamide-lithium chloride) by reacting the native wheat straw hemicellulosic polymers with lauroyl chloride using 4-dimethylaminopyridine as a catalyst. Other catalysts such as N-bromosuccinimide, N-methyl pyrrolidine, N-methyl pyrrolidinone, and pyridine were also investigated. Under optimum reaction conditions (2 equiv of lauroyl chloride and triethylamine per hydroxyl group, 5% 4-dimethylaminopyridine, 40 °C, 35 min), a high DS value of 1.54 was obtained. The biomaterials were characterized by FT-IR spectroscopy and ¹³C NMR spectroscopy as well as by thermal analysis. The results showed that the lauroylation occurred preferably at the C-3 hydroxyl group of β-d-Xylp units in the hemicelluloses, and the thermal stability of the hydrophobic polymers increased by esterification.     

Rapid esterification of wheat straw hemicelluloses induced by microwave irradiation

Esterification of wheat straw hemicelluloses with acetyl chloride, propionyl chloride, n-octanoyl chloride, lauroyl chloride, palmitoyl chloride, stearoyl chloride, and oleoyl chloride, respectively, using N-bromosuccinimide (NBS) as a catalyst was achieved in DMF/LICl medium by microwave irradiation. The effects of various acyl chlorides and the molar ratios of xylose units in hemicelluloses/acyl chloride on the degree of substitution (DS) were investigated and DS reached up to 1.34 by a few minutes. ¹³C NMR studies showed that the esterification occurred preferentially at the C-3 and C-2 positions. On the other hand, microwave irradiation brought a partial degradation of the polymer, and therefore resulted in a slight decrease in thermal stability of the hemicellulosic derivatives in comparison with conventional heating technique.     

Lipase-catalyzed acylation of lily polysaccharide in ionic liquid-containing systems

A comparative study was made of immobilized Burkholderia cepacia lipase (PSL-C)-catalyzed acylation of lily polysaccharide (LP) with vinyl acetate in organic solvents, ionic liquids (ILs) and IL-containing systems. The degree of substitution (DS) of the modified LP was used to evaluate the extent of acylation and thus enzymatic activity. In this manner, an eco-friendly solvent, 2-methyltetrahydrofuran (MeTHF), was found to be the most suitable organic reaction medium. However, compared to MeTHF, enhanced enzyme activity was observed when 1-butyl-3-methylimidazolium tetrafluorobrate ([C₄MIm][BF₄]) was used as the solvent. To further enhance the DS of the modified LP product, co-solvent mixtures of [C₄MIm][BF₄] and MeTHF were investigated. Among the various MeTHF–[C₄MIm][BF₄] systems examined, 20% (v/v) MeTHF–[C₄MIm][BF₄] produced the highest DS. In this reaction medium, the optimal water activity, reaction temperature and time were 0.33, 55 °C and 18 h, respectively, producing a product DS as high as 0.67. The PSL-C enzyme exhibited a much higher stability in the IL-containing system. Additionally, PSL-C-catalyzed acylation of LP was highly regioselective, causing acylation of only C6OH.     

Synthesis of Lipophilic Poly-Lauroyl-(+)-Catechins and Radical-Scavenging Activity

Lipophilic catechins were synthesized to improve absorption into living bodies and obtain new antioxidants effective in lipid bilayers. The hydroxyl (OH) groups of (+)-catechin was acylated randomly using lauroyl chloride. The mixture was separated by preparative HPLC, and 3-lauroyl-, 3′,4′-dilauroyl- and 3,3′,4′-trilauroyl-catechins (3-LC, 3′,4′-LC, and 3,3′,4′-LC) were obtained, their structures being determined by ¹H NMR. Their radical scavenging activity was measured in a ethanol solution using the 1,1-diphenyl-2-picrylhydrazyl radical, and was compared with that of (+)-catechin. The activity of 3-LC was almost same as that of (+)-catechin, but those of 3′,4′-LC and 3,3′,4′-LC were small, showing that the blocking of phenolic OH groups in the B ring lowered the activity. The scavenging activity on lipophilic radicals in a liposome system was also measured, and the activities were in the order of 3-LC > 3′,4′-LC = (+)-catechin. These results suggested that radical scavenging activity in the lipid membrane depended not only on the number and the relative positions of phenolic OH groups of catechins but also on affinity to the membrane.     

Homogeneous butyrylation and lauroylation of poplar wood in the ionic liquid 1-butyl-3-methylimidazolium chloride

Wood meal was dissolved under identical conditions in the ionic liquid 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl) and homogeneously esterified with butyryl chloride and lauroyl chloride in the presence of triethylamine as a neutralizer. The effect of the molar ratio of reagent to the hydroxyl groups in wood on the properties of the esterified wood and the possible mechanism of the homogeneous esterification of wood in this reaction medium were studied. Furthermore, the physicochemical properties of the esterified wood were characterized by FTIR, solid-state CP/MAS ¹³C NMR, TGA/DTG and SEM. The results confirmed that the homogeneous modifications were successfully processed and highly substituted wood esters could be obtained by reacting the dissolved wood in this homogeneous system.     

Cellulose esters from waste cotton fabric via conventional and microwave heating

The esterification of cellulose from waste cotton fabric in a N,N-dimethylacetamide/lithium chloride solvent system was carried out using different types of fatty acid chloride including butyryl chloride, capryloyl chloride, and lauroyl chloride as esterifying agents, and N,N-dimethyl 1-4-aminopyridine as a catalyst under conventional and microwave activation. Microwave esterification was performed under 2.45 GHz with power varying from 90 to 450 W. The optimum conditions for esterification of cotton cellulose with various esterifying agents were investigated in terms of reaction time and temperature to attain appropriate %weight increase and degree of substitution of esterified-cellulose. The degree of substitution, functional group and chemical structure, and thermal stability of cellulose ester powder were characterized by ¹H NMR, FTIR, and TGA/SDTA analysis. Morphologies, crystallinity, and solubility of modified cellulose by two different heating methods were compared.     

Synthesis of dehydroabietic acid-modified chitosan and its drug release behavior

A new type of chitosan derivative, dehydroabietic acid-modified chitosan (DAMC), was synthesized by the acylation reaction of chitosan with dehydroabietic acid chloride (DHAC) under microwave irradiation. The resulting product (DAMC) was characterized by FT-IR, UV, ¹H NMR, X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and elemental analysis. The degree of substitution (DS) of DAMC was 16.5%. And chitosan and DAMC were used as carriers of fenoprofen calcium (FC), and their controlled release behavior in artificial intestinal juice was studied. The results showed that the controlled release of FC from the carrier of DAMC is better than that from original chitosan.     

Synthesis and properties of fatty acid starch esters

Being completely bio-based, fatty acid starch esters (FASEs) are attractive materials that represent an alternative to crude oil-based plastics. In this study, two synthesis methods were compared in terms of their efficiency, toxicity and, especially, product solubility with starch laurate (C₁₂) as model compound. Laurates (DS > 2) were obtained through transesterification of fatty acid vinylesters in DMSO or reaction with fatty acid chlorides in pyridine. The latter lead to higher DS-values in a shorter reaction time. But due to the much better solubility of the products compared to lauroyl chloride esterified ones, vinylester-transesterification was preferred to optimize reaction parameters, where reaction time could be shortened to 2 h. FASEs C₆–C₁₈ were also successfully prepared via transesterification. To determine the DS of the resulting starch laurates, the efficient ATR-IR method was compared with common methods (elementary analysis, ¹H NMR). Molar masses (M_w) of the highly soluble starch laurates were analyzed using SEC-MALLS (THF). High recovery rates (>80%) attest to the outstanding solubility of products obtained through transesterification, caused by a slight disintegration during synthesis. Particle size distributions (DLS) demonstrated stable dissolutions in CHCl₃ of vinyl laurate esterified – contrary to lauroyl chloride esterified starch. For all highly soluble FASEs (C₆–C₁₈), formation of concentrated solutions (10 wt%) is feasible.     

Green synthesis of xylan hemicellulose esters

The esterification of xylan type hemicelluloses, isolated from birchwood, was carried out firstly in homogeneous conditions using N,N-dimethylformamide (DMF) and lithium chloride (LiCl) in the presence of 4-dimethylaminipyridine (DMAP). The degree of substitution (DS) of xylan acetates ranged between 0.9 and 2.0 as a function of experimental conditions. Due to the problems of toxicity and recycling of DMF, an alternative method of esterification is reported in the second part of this work, performing in the absence of organic solvent and using DMAP or methanesulfonic acid (MSA) as catalysts. Acetylation reaction catalyzed by MSA was developed through an experimental design in order to achieve the highest DS under the mildest conditions. The significant factors and their interactions were identified. The optimization of reaction parameters allowed to obtain a high DS (1.6) and maximal yield (85%). Moreover, the reactivity of propionic and hexanoic anhydrides was evaluated and hydrophobic xylan esters with low degrees of substitution were obtained.     

Synthesis, characterization and potential application of monoacyl-cyclodextrins

Although the preparation of cyclodextrin (CD) monoesters with a variety of carboxylic acids has been already described in the literature, the direct regioselective CD acylation has proved to be critical, often requiring to be replaced with a more elaborate synthetic process. In this paper we describe the one-step preparation of several monoacylated CDs from acyclic or aromatic carboxylic acid derivatives. The ability of β-CD to enclose cupric ions in a sandwich-type manner was exploited to lead to high regioselectivity in the acylation of β-CD with benzoyl chloride, cinnamoyl chloride and phenyl acetyl chloride in water. Long chain aliphatic monoesters of α-, β- and γ-CD were best prepared in DMF. The results of our study showed that solvent and general conditions determined an overwhelming regioselectivity of acylation. ¹H, ¹³C and 2D NMR experiments could easily discriminate the position of the ester. Monoacylated CDs were evaluated as a carrier of silibinin, the inclusion complexes were prepared and characterized by thermal analysis.     

Biosynthesis of lipid A in Escherichia coli. Acyl carrier protein-dependent incorporation of laurate and myristate

In previous studies we described enzyme(s) from Escherichia coli that transfer two 3-deoxy-D-manno-octulosonate (KDO) residues from two CMP-KDO molecules to a tetraacyldisaccharide-1,4'-bis-phosphate precursor of lipid A, termed lipid IVA (Brozek, K. A., Hosaka, K., Robertson, A. D., and Raetz, C. R. H. (1989) J. Biol. Chem. 264, 6956-6966). The product, designated (KDO)2-IVA, can be prepared in milligram quantities and/or radiolabeled with 32P at position 4' of the IVA moiety. We now demonstrate the presence of enzymes in E. coli extracts that transfer laurate and/or myristate residues from lauroyl or myristoyl-acyl carrier protein (ACP) to (KDO)2-IVA. Thioesters of coenzyme A are not substrates. The cytosolic fraction catalyzes rapid acylation with lauroyl-ACP, but not with myristoyl, R-3-hydroxymyristoyl, palmitoyl, or palmitoleoyl-ACP. The membrane fraction transfers both laurate and myristate to (KDO)2-IVA. Evidence for the enzymatic acylation of (KDO)2-IVA is provided by (a) conversion of [4'-32P](KDO)2-IVA to more rapidly migrating products in the presence of the appropriate acyl-ACP, (b) incorporation of [1-14C]laurate or [1-14C]myristate into these metabolites in the presence of (KDO)2-IVA, (c) fast atom bombardment-mass spectrometry, and (d) 1H NMR spectroscopy. At protein concentrations less than 0.5 mg/ml, the acylation of (KDO)2-IVA by the cytoplasmic fraction is absolutely dependent upon the addition of exogenous acyl-ACP. These acyltransferases cannot utilize lipid IVA as a substrate, demonstrating that they possess novel KDO recognition domains. The unusual substrate specificity of these enzymes provides compelling evidence for their involvement in lipid A biosynthesis. Depending on the conditions it is possible to acylate (KDO)2-IVA with 1 or 2 lauroyl residues, with 1 or 2 myristoyl residues, or with 1 of each.     

Synthesis of lipophilic poly-lauroyl-(+)-catechins and radical-scavenging activity

Lipophilic catechins were synthesized to improve absorption into living bodies and obtain new antioxidants effective in lipid bilayers. The hydroxyl (OH) groups of (+)-catechin was acylated randomly using lauroyl chloride. The mixture was separated by preparative HPLC, and 3-lauroyl-, 3',4'-dilauroyl- and 3,3',4'-trilauroyl-catechins (3-LC, 3',4'-LC, and 3,3',4'-LC) were obtained, their structures being determined by (1)H NMR. Their radical scavenging activity was measured in a ethanol solution using the 1,1-diphenyl-2-picrylhydrazyl radical, and was compared with that of (+)-catechin. The activity of 3-LC was almost same as that of (+)-catechin, but those of 3',4'-LC and 3,3',4'-LC were small, showing that the blocking of phenolic OH groups in the B ring lowered the activity. The scavenging activity on lipophilic radicals in a liposome system was also measured, and the activities were in the order of 3-LC > 3',4'-LC = (+)-catechin. These results suggested that radical scavenging activity in the lipid membrane depended not only on the number and the relative positions of phenolic OH groups of catechins but also on affinity to the membrane.     

Acetone-soluble cellulose acetates prepared by one-step homogeneous acetylation of cornhusk cellulose in an ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl)

Cellulose samples extracted from cornhusk have been successfully acetylated in an ionic liquid 1-allyl-3-methylimidazolium chloride (AmimCl). Without using any catalyst, cornhusk cellulose acetates (CCAs) with the degree of substitution (DS) in a range from 2.16 to 2.63 were prepared in one-step. Under the homogeneous state, the DS value of CCAs was easily controlled by the acetylation time. The obtained CCAs were characterized by means of FT-IR, ¹³C NMR, DSC, TGA, and a mechanical test. The NMR results showed that the distribution of the acetyl moiety among the three OH groups of the anhydroglucose unit shows a preference at the C₆ position. The CCAs exhibited good solubility in some organic solvents, such as acetone and DMSO. The cast CCA films from their acetone solutions had good mechanical properties. At the end of each acetylation of cornhusk cellulose, the ionic liquid AmimCl could be effectively recovered. Therefore, this study presents a promising approach and “green process” to make use of crop by-products.     

Self-organized pullulan/deoxycholic acid nanogels: Physicochemical characterization and anti-cancer drug-releasing behavior

The objective of this study was to develop new self-organized nanogels as a means of drug delivery in patients with cancer. Pullulan (PUL) and deoxycholic acid (DOCA) were conjugated through an ester linkage between the hydroxyl group in PUL and the carboxyl group in DOCA. Three types of PUL/DOCA conjugates were obtained, differing in the number of DOCA substitutions (DS; 5, 8, or 11) per 100 PUL anhydroglucose units. The physicochemical properties of the resulting nanogels were characterized by dynamic light scattering, transmission electron microscopy, and fluorescence spectroscopy. The mean diameter of DS 11 was the smallest (approx. 100 nm), and the size distribution was unimodal. To determine the organizing behavior of these conjugates, we calculated their critical aggregation concentrations (CACs) in a 0.01-M phosphate buffered saline solution. They were 10.5×10⁻⁴ mg/mL, 7.2×10⁻⁴ mg/mL, and 5.6×10⁻⁴ mg/mL for DS 5, 8, and 11, respectively. This indicates that DOCA can serve as a hydrophobic moiety to create self-organized nanogels. To monitor the drug-releasing behavior of these nanogels, we loaded doxorubicin (DOX) onto the conjugates. The DOX-loading efficiency increased with the degree of DOCA substitution. The release rates of DOX from PUL/DOCA nanogels varied inversely with the DS. We concluded that the PUL/DOCA nanogel has some potential for use as an anticancer drug carrier because of its low CAC and satisfactory drug-loading capacity.     

Electrolyte distribution and active salt uptake in frog skin

1. The "chloride space" in frog skin was determined and found to be 69.7 per cent by weight of wet skin. The chloride space occupies about 94 per cent of the total water space of skin. From this and other information, it appears that the "non-chloride space" measures only a part of the space occupied by the structural elements of skin. This space is referred to here as the intracellular compartment and the remainder as the extracellular compartment of frog skin. On this basis, potassium and sodium in skin are distributed as follows: total sodium, 60 to 75 µeq./gm. of wet skin; all sodium is probably extracellular; total potassium, 39 to 49 µeq./gm.; intracellular potassium, 37 to 47 µeq./gm. 2. Skins were immersed in solutions differing from each other in their sodium and potassium concentrations. Three levels of NaCl were studied: 48, 119, and 169 µeq./ml. For each of these solutions (referred to below as diluted, physiological, and concentrated saline), the potassium levels were varied from 0.1 to 20 µeq./ml. For skins in solutions low in potassium and high in sodium, it was found that an exchange of intracellular potassium against extracellular sodium occurs. The ratio for the number of potassium ions lost/number of sodium ions gained was 4:1,4:6, and 4:8 for skin in K⁺-free diluted, physiological, and concentrated saline, respectively. 3. Uptake of NaCl by the epithelium of frog skin is dependent on the potassium concentration of the environment. For skins in physiological saline, net uptake of NaCl was optimal (0.90 µeq. x cm.^–2 x hr.^–1) at 1 to 5 µeq. K₊/ml. For skins in diluted and concentrated saline optimal NaCl uptake was seen at potassium concentrations of approximately 5 and 10 µeq. K₊/ml., respectively. Net uptake of NaCl by the skin is also discussed, with relation to the potassium balance of skin. 4. Skin potentials decreased with increasing extracellular potassium concentration when diluted saline solutions were used. The opposite of this was found for skins in concentrated saline. For skins in physiological saline, skin potentials rose sharply from rather low values, when placed in solutions very low in potassium, to relatively high values, when immersed in solutions containing 1 to 5 µeq. K⁺/ml. Further increase in potassium concentration of the bath led to slight reductions in skin potentials. The highest potentials observed were of the order of 40 mv. In all cases studied, the inside was positive with relation to the outside. 5. It can be shown that values for intracellular potassium concentration as a function of extracellular potassium concentration satisfy, at a first but good approximation, Freundlich's isotherm. A modification of Freundlich's isotherm, recently introduced by Sips, may also be used to correlate the experimental data quantitatively. Since the latter isotherm has a rational interpretation, it is suggested that this be used, rather than Freundlich's isotherm, to express quantitatively the dependence of intracellular on extracellular potassium in frog skin.     

Inhibition of influenza-virus-induced cytopathy by sialylglycoconjugates

The anti-viral activity of gangliosides such as SPG (sialylparagloboside), GD1a, GM3, and GM4 was assessed by inhibition of the cytopathy of MDCK cells due to infection with the influenza virus A/PR/8/34. The inhibitory effect was in the following sequence: SPG>GD1a>GM3>GM4. The IC50 of SPG and GD1a was 7 and 70 microM, respectively, indicating that they are more effective than the representative inhibitor amantadine. Although 3'-sialyllactose (3'-SL) and 3'-sialyllactosamine (3'-SLN), which are identical to the terminal trisaccharides of GM3 and SPG, respectively, did not show any inhibitory effect, introduction of an amino group to the reducing end of 3'-SL following amidation with lauroyl chloride gave the inhibitory potency, which was comparable to that of GM3. These results suggest that the viral hemagglutinin recognizes exogenous sialyloligosaccharides rather than inherent sialyloligosaccharides expressed on MDCK cells, since introduction of the hydrophobic moiety to oligosaccharides might cause micelle formation.     

A high yield procedure for the preparation of arsonolipids (2,3-diacyloxypropylarsonic acids)

The crucial step in the preparation of the title arsonolipids starting from the dichloromethane-soluble dithioarsonite CH₂(OH)CH(OH)CH₂–As(SPh)₂ is to avoid an internal cyclization during the acylation which protects the primary –OH group from being acylated. This was to a large extent accomplished by using fatty acyl chloride in the presence of the weak base pyridine and controlling the temperature and rate of the acyl chloride addition, giving ～70% yields of arsonolipids. The presence of catalytic amounts of 4-dimethylaminopyridine boosted the yields to 82–85%. This yield is a great improvement over the yields (20–55%) previously achieved. The acylating systems (RCO)₂O or RCOCl and BF₃·Et₂O gave only moderate yields (25–60%) of arsonolipids.     

Effets in vitro des dermaseptines sur les caractéristiques du sperme

The spermicidal efficacy of synthetic peptides, dermaseptin (DS1) and (DS4), was studied under in vitro conditions using human spermatozoa. The data showed that sperm motility was inhibited with various concentrations of dermaseptins at different intervals ranging from 2 to 240 min. The effective 100% inhibitory concentration (EC100) of DS4 sperm immobilization assay was equal to 50 mg/ml at 30 min, while the EC 100 of DS1 was equal to 100 mg/ml. The presence of 0.1% of chelating agent, EDTA, reduced the EC100 of DS4 to 5 mg/ml, while less than a twofold enhancement in DS 1 activity was observed in combination with EDTA. The action of dermaseptins on sperm motility was observed to be dose-dependent. Addition of pentoxifylline, which is known to enhance sperm motility, and Ca²⁺, which is a key element for sperm movement, did not prevent the spermicidal action of dermaseptins.     

Synthesis and characterization of quaternized β-chitin

Water-soluble 2′-O-hydroxypropyltrimethylammoniumchitin chloride (2′-O-HTACCt) was prepared directly from β-chitin and 3-chloro-2-hydroxypropyltrimethylammonium chloride (CTA) in basic medium. The effect of alkali concentration, reaction temperature, reaction time, and dosage of CTA on yield and degree of substitution (DS) of 2′-O-HTACCt were studied. These quaternized chitin derivatives were characterized by FTIR and ¹H NMR spectroscopy, conductometric titration, and elemental analysis methods. Research results indicate that β-chitin can react directly with CTA to produce a water-soluble 2′-O-HTACCt derivative with a high DS. The optimal preparation conditions were determined to be 35-40 wt % (aq NaOH), 40 °C (reaction temperature), 6 h (reaction time), and 4 (molar ratio of CTA to β-chitin unit).     

Highly regioselective enzymatic synthesis of 5′-O-stearate of 1-β-D-arabinofuranosylcytosine in binary organic solvent mixtures

In this paper, highly regioselective enzymatic acylations of 1-β-D-arabinofuranosylcytosine (ara-C) with vinyl stearate (VS) in binary organic solvents were explored for the preparation of 5′-O-stearate of ara-C with potential antitumor activity. Twelve kinds of hydrolases were tested for the regioselective acylation reaction and the immobilized Candida antarctica lipase B (Novozym 435) showed the highest regioselectivity (>99.9%) towards the 5′-OH of ara-C. A comparative study showed that the lipase had much higher catalytic activity in the binary mixture of hexane and pyridine than in other tested co-solvent systems. To better understand lipase-mediated acylation conducted in the best binary organic solvent system, the effects of hydrophobic solvent content, molar ratio of VS to ara-C, initial water activity, and reaction temperature on the acylation reaction were studied. It was found that the most suitable hexane content, VS–ara-C molar ratio, initial water activity, and reaction temperature were shown to be 25% (v/v), 20:1, 0.07, and 50°C, respectively. Under these reaction conditions, the initial reaction rate, the maximum substrate conversion, and regioselectivity were as high as 86.0 mmol·L⁻¹h⁻¹, 96.6%, and >99.9%, respectively. The product of Novozym 435-catalyzed acylation was characterized by Carbon-13(¹³C) NMR and confirmed to be 5′-O-stearate of ara-C.