In vitro cytogenetic effects of Andrographis paniculata (kalmegh) on arsenic

In vitro effects of arsenic in human peripheral lymphocytes (HPL) at three different doses – 3.6×10⁻⁴, 1.4×10⁻³ and 0.72×10⁻³ μM for 24 h before harvesting on sister chromatid exchanges (SCE), Cell cycle proliferative index/replicative index (CCPI/RI), %M₁, %M₂ and %M₃, population doubling time (PDT) and average generation time (AGT) were examined. Andrographis paniculata (commonly referred to as ‘kalmegh’) has been used for centuries in traditional Indian and Chinese herbal medicine as a safe, natural folk remedy for assorted health concerns. In the present study, kalmegh (0.01 μg/7 ml culture media) was used along with the highest dose of arsenic; the results showed that arsenic induced increase in these genotoxic endpoints were fairly diminished by kalmegh. In addition, mutagenic in vitro effect of ethyl methanesulphonate (EMS) was used as a positive control in this study. It is thus concluded from this study that Andrographis has a protective role in arsenic toxicity.     

Graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose and study of its swelling, metal ion sorption and flocculation behaviour

The present paper reports the graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose by free radical polymerization using potassium peroxymonosulphate/thiourea redox system in an inert atmosphere. The reaction conditions for maximum grafting have been optimized by varying the reaction variables, including the concentration of N-vinylformamide (12.0 × 10⁻²–28.0 × 10⁻² mol dm⁻³), potassium peroxymonosulphate (4.0 × 10⁻³–12.0 × 10⁻³ mol dm⁻³), thiourea (1.2 × 10⁻³–4.4 × 10⁻³ mol dm⁻³), sulphuric acid (2.0 × 10⁻³–10.0 × 10⁻³ mol dm⁻³), sodium carboxymethylcellulose (0.2–1.8 g dm⁻³) along with time duration (60–180 min) and temperature (25–45° C). Water swelling capacity, metal ion sorption and flocculation studies of synthesized graft copolymer have been performed with respect to the parent polymer. The graft copolymer has been characterized by FTIR spectroscopy and thermogravimetric analysis.     

Red tide blooms of Cochlodinium polykrikoides in a coastal cove

Successive blooms of the dinoflagellate Cochlodinium polykrikoides occurred in Pettaquamscutt Cove, RI, persisting from September through December 1980 and again from April through October 1981. Cell densities varied from <100 cells L⁻¹ at the onset of the bloom and reached a maximum density exceeding 3.4 × 10⁶ cells L⁻¹ during the summer of 1981. The bloom was mainly restricted to the mid to inner region of this shallow cove with greatest concentrations localized in surface waters of the southwestern region during summer/fall periods of both years. Highly motile cells consisting of single, double and multiple cell zooids were found as chains of 4 and 8 cells restricted to the late August/September periods. The highest cell densities occurred during periods when annual temperatures were between 19 and 28 °C and salinities between 25 and 30. A major nutrient source for the cove was Crying Brook, located at the innermost region at the head of the cove. Inorganic nitrogen (NH₃ and NO₂ + NO₃) from the brook was continually detectable throughout the study with maximum values of 57.5 and 82.5 μmol L⁻¹, respectively. Phosphate (PO₄-P) was always present in the source waters and rarely <0.5 μmol L⁻¹; silicate always exceeded 30 μmol L⁻¹ with maximum concentrations reaching 226 μmol L⁻¹. Chlorophyll a and ATP concentrations during the blooms varied directly with cell densities. Maximum Chl a levels were 218 mg m⁻³ and ATP-carbon was >20 g C m⁻³. Primary production by the dinoflagellate-dominated community during the bloom varied between 4.3 and 0.07 g C m⁻³ d⁻¹. Percent carbon turnover calculated from primary production values and ATP-carbon varied from 6 to 129% d⁻¹. The dinoflagellates dominated the entire summer period; other flagellates and diatoms were present in lesser amounts. A combination of low washout rate due to the cove dynamics, active growth, and life cycles involving cysts allowed C. polykrikoides to maintain recurrent bloom populations in this area.     

Nitrogen utilization by the raphidophyte Heterosigma akashiwo: Growth and uptake kinetics in laboratory cultures

The nitrogen uptake and growth capabilities of the potentially harmful, raphidophycean flagellate Heterosigma akashiwo (Hada) Sournia were examined in unialgal batch cultures (strain CCMP 1912). Growth rates as a function of three nitrogen substrates (ammonium, nitrate and urea) were determined at saturating and sub-saturating photosynthetic photon flux densities (PPFDs). At saturating PPFD (110 μE m⁻² s⁻¹), the growth rate of H. akashiwo was slightly greater for cells grown on NH₄⁺ (0.89 d⁻¹) compared to cells grown on NO₃⁻ or urea, which had identical growth rates (0.82 d⁻¹). At sub-saturating PPFD (40 μE m⁻² s⁻¹), both urea- and NH₄⁺-grown cells grew faster than NO₃⁻-grown cells (0.61, 0.57 and 0.46 d⁻¹, respectively). The N uptake kinetic parameters were investigated using exponentially growing batch cultures of H. akashiwo and the ¹⁵N-tracer technique. Maximum specific uptake rates (V_max) for unialgal cultures grown at 15 °C and saturating PPFD (110 μE m⁻² s⁻¹) were 28.0, 18.0 and 2.89 × 10⁻³ h⁻¹ for NH₄⁺, NO₃⁻ and urea, respectively. The traditional measure of nutrient affinity—the half saturation constants (K_s) were similar for NH₄⁺ and NO₃⁻ (1.44 and 1.47 μg-at N L⁻¹), but substantially lower for urea (0.42 μg-at N L⁻¹). Whereas the α parameter (α = V_max/K_s), which is considered a more robust indicator for substrate affinity when substrate concentrations are low (<K_s), were 19.4, 12.2 and 6.88 × 10⁻³ h⁻¹/(μg-at N L⁻¹) for NH₄⁺, NO₃⁻ and urea, respectively. These laboratory results demonstrate that at both saturating and sub-saturating N concentrations, N uptake preference follows the order: NH₄⁺ > NO₃⁻ > urea, and suggests that natural blooms of H. akashiwo may be initiated or maintained by any of the three nitrogen substrates examined.     

Application of response-surface methodology to evaluate the optimum medium components for the enhanced production of lichenysin by Bacillus licheniformis R2

Biosurfactants have gained attention because they exhibit some advantages such as biodegradability, low toxicity, ecological acceptability and ability to be produced from renewable and cheaper substrates. They are widely used for environmental applications for bioremediation and also in biomedical field. However, the high cost of production is the limiting factor for widespread industrial applications. Thus, optimization of the growth medium for biosurfactant-lichenysin production by Bacillus licheniformis R2 was carried out using response-surface methodology. A preliminary screening phase based on a two-level fractional factorial design led to the identification of NH₄NO₃, glucose, Na₂HPO₄ and MnSO₄·4H₂O concentrations as the most significant variables affecting the fermentation process. The 2⁴ full-factorial central composite design was then applied to further optimize the biosurfactant production. The optimal levels of the aforementioned variables were (g/l): NH₄NO₃, 1.0; glucose, 34.0; KH₂PO₄, 6.0; Na₂HPO₄, 2.7; MgSO₄·7H₂O, 0.1; CaCl₂, 1.2 × 10⁻³; FeSO₄·7H₂O, 1.65 × 10⁻³; MnSO₄·4H₂O, 1.5 × 10⁻³ and Na–EDTA, 2.2 × 10⁻³. With the optimization procedure, the relative lichenysin yield expressed as the critical micelle dilution (CMD) was fourfold higher than that obtained in the non-optimized reference medium.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Quantification of hydrogen peroxide and glucose using 3-methyl-2-benzothiazolinonehydrazone hydrochloride with 10,11-dihydro-5H-benz(b,f)azepine as chromogenic probe

A sensitive, selective, and rapid enzymatic method is proposed for the quantification of hydrogen peroxide (H₂O₂) using 3-methyl-2-benzothiazolinonehydrazone hydrochloride (MBTH) and 10,11-dihydro-5H-benz(b,f)azepine (DBZ) as chromogenic cosubstrates catalyzed by horseradish peroxidase (HRP) enzyme. MBTH traps free radical released during oxidation of H₂O₂ by HRP and gets oxidized to electrophilic cation, which couples with DBZ to give an intense blue-colored product with maximum absorbance at 620 nm. The linear response for H₂O₂ is found between 5 × 10⁻⁶ and 45 × 10⁻⁶ mol L⁻¹ at pH 4.0 and a temperature of 25 °C. Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 0.415 × 10⁶ M⁻¹ min⁻¹ and 9.81 × 10⁻⁴ min⁻¹, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the cosubstrates were 163.2 min⁻¹ and 4.156 × 10⁶ L mol⁻¹ min⁻¹, respectively. This method can be incorporated into biochemical analysis where H₂O₂ undergoes catalytic oxidation by oxidase. Its applicability in the biological samples was tested for glucose quantification in human serum.     

ICChI, a glycosylated chitinase from the latex of Ipomoea carnea

A multi-functional enzyme ICChI with chitinase/lysozyme/exochitinase activity from the latex of Ipomoea carnea subsp. fistulosa was purified to homogeneity using ammonium sulphate precipitation, hydrophobic interaction and size exclusion chromatography. The enzyme is glycosylated (14–15%), has a molecular mass of 34.94 kDa (MALDI–TOF) and an isoelectric point of pH 5.3. The enzyme is stable in pH range 5.0–9.0, 80 °C and the optimal activity is observed at pH 6.0 and 60 °C. Using p-nitrophenyl-N-acetyl-β-d-glucosaminide, the kinetic parameters K_m, V_max, K_cat and specificity constant of the enzyme were calculated as 0.5 mM, 2.5 × 10⁻⁸ mol min⁻¹ μg enzyme⁻¹, 29.0 s⁻¹ and 58.0 mM⁻¹ s⁻¹ respectively. The extinction coefficient was estimated as 20.56 M⁻¹ cm⁻¹. The protein contains eight tryptophan, 20 tyrosine and six cysteine residues forming three disulfide bridges. The polyclonal antibodies raised and immunodiffusion suggests that the antigenic determinants of ICChI are unique. The first fifteen N-terminal residues G–E–I–A–I–Y–W–G–Q–N–G–G–E–G–S exhibited considerable similarity to other known chitinases. Owing to these unique properties the reported enzyme would find applications in agricultural, pharmaceutical, biomedical and biotechnological fields.     

Nitrogenous preference of toxigenic Pseudo-nitzschia australis (Bacillariophyceae) from field and laboratory experiments

Field and laboratory experiments were designed to determine the differential growth and toxin response to inorganic and organic nitrogen additions in Pseudo-nitzschia spp. Nitrogen enrichments of 50 μM nitrate (KNO₃), 10 μM ammonium (NH₄Cl), 20 μM urea and a control (no addition) were carried out in separate carboys with seawater collected from the mouth of the San Francisco Bay (Bolinas Bay), an area characterized by high concentrations of macronutrients and iron. All treatments showed significant increases in biomass, with chlorophyll a peaking on days 4–5 for all treatments except urea, which maintained exponential growth through the termination of the experiment. Pseudo-nitzschia australis Frenguelli abundance was 10³ cells l⁻¹ at the start of the experiment and increased by an order of magnitude by day 2. Particulate domoic acid (pDA) was initially low but detectable (0.15 μg l⁻¹), and increased throughout exponential and stationary phases across all treatments. At the termination of the experiment, the urea treatment produced more than double the amount of pDA (9.39 μg l⁻¹) than that produced by the nitrate treatment (4.26 μg l⁻¹) and triple that of the control and ammonium treatments (1.36 μg l⁻¹ and 2.64 μg l⁻¹, respectively). The mean specific growth rates, calculated from increases in chlorophyll a and from cellular abundance of P. australis, were statistically similar across all treatments.These field results confirmed laboratory experiments conducted with a P. australis strain isolated from Monterey Bay, CA (isolate AU221-a) grown in artificial seawater enriched with 50 μM nitrate, 50 μM ammonium or 25 μM of urea as the sole nitrogen source. The exponential growth rate of P. australis was significantly slower for cells grown on urea (ca. 0.5 day⁻¹) compared to the cells grown on either nitrate or ammonium (ca. 0.9 day⁻¹). However the urea-grown cells produced more particulate and dissolved domoic acid (DA) than the ammonium- or nitrate-grown cells. The field and laboratory experiments demonstrate that P. australis is able to grow effectively on urea as the primary source of nitrogen and produced more pDA when grown on urea in both natural assemblages and unialgal cultures. These results suggest that the influence of urea from coastal runoff may prove to be more important in the development or maintenance of toxic blooms than previously thought, and that the source of nitrogen may be a determining factor in the relative toxicity of west coast blooms of P. australis.     

Synthesis, characterization and applications of graft copolymer (Chitosan-g-N,N-dimethylacrylamide)

An unreported graft copolymer of N,N-dimethylacrylamide (DMA) with chitosan has been synthesized under nitrogen atmosphere using peroxymonosulphate/mandelic acid redox pair. The effect of reaction conditions on grafting parameters i.e. grafting ratio, efficiency, conversion, add on and homopolymer has been studied. Experimental results show that maximum grafting has been obtained at 1.0 g dm⁻³ concentration of chitosan, 30 × 10⁻² mol dm⁻³ concentration of N,N-dimethylacrylamide and 7.0 × 10⁻³ mol dm⁻³ concentration of hydrogen ion. It has also been observed that grafting ratio, add on, conversion and efficiency increase upto 3.2 × 10⁻³ mol dm⁻³ of mandelic acid, 12.0 × 10⁻³ mol dm⁻³ of potassium peroxymonosulphate, 150 min of time and 40 °C of temperature. Grafted polymer has been characterized by FTIR spectroscopy and thermogravimetric analysis. Water swelling capacity of chitosan-g-N,N-dimethylacrylamide has been determined. It has been observed that the graft copolymer is thermally more stable than parent backbone.     

Membrane Permeability Characteristics of Metaphase II Mouse Oocytes at Various Temperatures in the Presence of Me2SO

In this study, the hydraulic conductivity (L_p), Me₂SO permeability ( _Me2SO), and the reflection coefficients (ς) and their activation energies were determined for Metaphase II (MII) mouse oocytes by exposing them to 1.5 M Me₂SO at temperatures of 30, 20, 10, 3, 0, and −3°C. These data were then used to calculate the intracellular concentration of Me₂SO at given temperatures. Individual oocytes were immobilized using a holding pipette in 5 μl of an isosmotic PBS solution and perfused with precooled or prewarmed 1.5 M Me₂SO solutions. Oocyte images were video recorded. The cell volume changes were calculated from the measurement of the diameter of the oocytes, assuming a spherical shape. The initial volume of the oocytes in the isoosmotic solution was considered 100%, and relative changes in the volume of the oocytes after exposure to the Me₂SO were plotted against time. Mean (means ± SEM) L_pvalues in the presence of Me₂SO ( ^Me₂SO_p) at 30, 20, 10, 3, 0, and −3°C were determined to be 1.07 ± 0.03, 0.40 ± 0.02, 0.18 ± 0.01, 7.60 × 10⁻²± 0.60 × 10⁻², 5.29 × 10⁻²± 0.40 × 10⁻², and 3.69 × 10⁻²± 0.30 × 10⁻²μm/min/atm, respectively. The _Me2SOvalues were 3.69 × 10⁻³± 0.3 × 10⁻³, 1.07 × 10⁻³± 0.1 × 10⁻³, 2.75 × 10⁻⁴± 0.15 × 10⁻⁴, 7.83 × 10⁻⁵± 0.50 × 10⁻⁵, 5.24 × 10⁻⁵± 0.50 × 10⁻⁵, and 3.69 × 10⁻⁵± 0.40 × 10⁻⁵cm/min, respectively. The ς values were 0.70 ± 0.03, 0.77 ± 0.04, 0.81 ± 0.06, 0.91 ± 0.05, 0.97 ± 0.03, and 1 ± 0.04, respectively. The estimated activation energies (E_a) for ^Me₂SO_p, _Me2SO, and ς were 16.39, 23.24, and −1.75 Kcal/mol, respectively. These data may provide the fundamental basis for the development of more optimal cryopreservation protocols for MII mouse oocytes.     

Activity and efficacy of Bacillus subtilis strain NJ-18 against rice sheath blight and Sclerotinia stem rot of rape

A strain of Bacillus subtilis (NJ-18) with broad antimicrobial activity was screened in the laboratory and in the field. NJ-18 inhibited the in vitro radial extension of hyphae of the phytopathogenic fungi Rhizoctonia solani and Sclerotinia sclerotiorum. The bacterium apparently produced antifungal metabolites that diffused through the agar and caused abnormal swelling of hyphae. The in vitro data and observations indicated that one of the mechanisms of inhibition by NJ-18 is antibiosis. In field experiments for control of sheath blight of rice, fermentation of NJ-18 at 5.0 × 10⁷ cfu ml⁻¹ significantly reduced disease incidence and severity; NJ-18 alone or combined with 50% kresoxim-methyl treatment at 225 g ai ha⁻¹ provided better control than 50% kresoxim-methyl at 225 g ai ha⁻¹ or Jinggangmycin at 120 g ai ha⁻¹, and control by NJ-18 alone was as high as 100.0%. In field experiments for control of Sclerotinia stem rot of rape, fermentation of NJ-18 at 1.0 × 10⁷ cfu ml⁻¹ again significantly reduced disease incidence and severity; control by NJ-18 was as high as 77.1% and was comparable with control by 46% dimethachlon and better than control by 50% carbendazim at 750 g ai ha⁻¹. We conclude that strain NJ-18 of B. subtilis is a promising biological control agent and should be further studied and tested for control of sheath blight of rice, Sclerotinia stem rot of rape, and other diseases.     

Prostaglandin I2 as a potentiator of acute inflammation in rats

Prostaglandin I₂ potentiated the paw swelling induced by carrageenin in rats. Prostaglandin I₂ (0.1 μg) showed similar activity to PGE₁ (0.01 μg). This potentiating property disappeared in 60 minutes and was completely abolished by diphenhydramine (25 mg kg⁻¹, i.p.). In vascular permeability tests, PGI₂ itself (2.5 × 10⁻¹⁰ mol, 88 ng) caused no dye leakage reaction, but PGE₁ (2.5 × 10⁻¹⁰ mol, 88.5 ng) caused a significant dye leakage. This effect of PGE₁ was statistically significant compared with vehicle- or PGI₂-treated group (p<0.05). Prostaglandin I₂ potentiated the increased vascular permeability induced by 5-hydroxytriptamine (2.5 × 10⁻¹⁰ mol), bradykinin (5 × 10⁻¹⁰ mol) and histamine (2 × 10⁻¹⁰ to 2 × 10⁻⁸ mol). The potentiation was the most evidence in the case of histamine.     

Ergosterol contents of some wood-rotting basidiomycete fungi grown in liquid and solid culture conditions

Ergosterol contents of six wood-rotting basidiomycetes were analyzed under different cultivation conditions. Four white-rot and two brown-rot fungi were cultivated in liquid synthetic medium with low nutrient nitrogen (2 mM) and 0.1% glucose, and ergosterol in mycelial biomasses were measured weekly for 35 days. The highest ergosterol content per fungal dry mass in the white-rot fungi was found in Phanerochaete chrysosporium being 2100 μg g⁻¹, while in Ceriporiopsis subvermispora it was 1700 μg g⁻¹, Phlebia radiata 700 μg g⁻¹, and Physisporinus rivulosus 560 μg g⁻¹. In brown-rot fungi the ergosterol content was in Poria placenta 2868 μg g⁻¹ and in Gloeophyllum trabeum 3915 μg g⁻¹. On agar media, P. chrysosporium and P. radiata reached the highest ergosterol value in 7 days, while in wood block cultures the ergosterol contents were quite stable. The conversion factors for ergosterol-to-fungal biomass varied from 48 and 243, which were lower than values for ascomycetous soil fungi reported in the literature.     

Production and recovery of recombinant protease inhibitor α1-antitrypsin

Human α₁-antitrypsin (AAT) was produced in the recombinant yeast Saccharomyces cerevisiae ATCC 20699 grown in batch and fed-batch culture. The final biomass concentration and antitrypsin concentration attained were 55 g·L⁻¹ and 1.23 g·L⁻¹, respectively, in the fed-batch. The maximum productivities of biomass and antitrypsin were 1.6 and > 0.04 g L⁻¹h⁻¹, respectively, or substantially greater than the highest productivity values reported in the past. For recovering the antitrypsin, the cell slurry was concentrated 4-fold (231 g·L⁻¹ biomass, 122 min of processing) by cross-flow microfiltration and the cells were disrupted by bead milling (3 passes of 3 min total retention time). The cell homogenate was treated with aluminum chloride or PBS (pH 7) to aid separation of the cell debris by flocculation and sedimentation. The clarified cell homogenate was subjected to ammonium sulfate fractionation to precipitate the recombinant antitrypsin. The AAT precipitated at 45–75% saturation of ammonium sulfate, depending on the age of the homogenate. The crude AAT in the homogenate degraded at room temperature (25°C), with a zero order deactivation rate of 1.815 × 10⁻³ ± 3.43 × 10⁻⁴ g AAT L⁻¹h⁻¹.     

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode

Novel Pt nanoclusters embedded polypyrrole nanowires (PPy-Pt) composite was electrosynthesized on a glassy carbon electrode, denoted as PPy-Pt/GCE. A glucose biosensor was further fabricated based on immobilization of glucose oxidase (GOD) in an electropolymerized non-conducting poly(o-aminophenol) (POAP) film that was deposited on the PPy-Pt/GCE. The morphologies of the PPy nanowires and PPy-Pt nanocomposite were characterized by field emission scanning electron microscope (FE-SEM). Effect of experimental conditions involving the cycle numbers for POAP deposition and Pt nanoclusters deposition, applied potential used in glucose determination, temperature and pH value of the detection solution were investigated for optimization. The biosensor exhibited an excellent current response to glucose over a wide linear range from 1.5 × 10⁻⁶ to 1.3 × 10⁻² M (r = 0.9982) with a detection limit of 4.5 × 10⁻⁷ M (s/n = 3). Based on the combination of permselectivity of the POAP and the PPy films, the sensor had good anti-interference ability to ascorbic acid (AA), uric acid (UA) and acetaminophen. The apparent Michaelis–Menten constant (K_m) and the maximum current density (I_m) were estimated to be 23.9 mM and 378 μA/cm², respectively. In addition, the biosensor had also good sensitivity, stability and reproducibility.     

Effect of renoguanylin on hydrogen/bicarbonate ion transport in rat renal tubules

Renoguanylin (REN) is a recently described member of the guanylin family, which was first isolated from eels and is expressed in intestinal and specially kidney tissues. In the present work we evaluate the effects of REN on the mechanisms of hydrogen transport in rat renal tubules by the stationary microperfusion method. We evaluated the effect of 1 μM and 10 μM of renoguanylin (REN) on the reabsorption of bicarbonate in proximal and distal segments and found that there was a significant reduction in bicarbonate reabsorption. In proximal segments, REN promoted a significant effect at both 1 and 10 μM concentrations. Comparing control and REN concentration of 1 μM, JHCO₃⁻, nmol cm^− 2 s^− 1 − 1,76 ± 0,11_control × 1,29 ± 0,08_{REN 10 μM}; P < 0.05, was obtained. In distal segments the effect of both concentrations of REN was also effective, being significant e.g. at a concentration of 1 μM (JHCO₃⁻, nmol cm^− 2 s⁻ 1 − 0.80 ± 0.07_control × 0.60 ± 0.06_{REN 1 μM}; P < 0.05), although at a lower level than in the proximal tubule. Our results suggest that the action of REN on hydrogen transport involves the inhibition of Na⁺/H⁺exchanger and H⁺-ATPase in the luminal membrane of the perfused tubules by a PKG dependent pathway.     

Influence of humic, fulvic and hydrophilic acids on the growth, photosynthesis and respiration of the dinoflagellate Prorocentrum minimum (Pavillard) Schiller

Blooms of the dinoflagellate Prorocentrum minimum often occur in coastal regions characterized by variable salinity and elevated concentrations of terrestrially derived dissolved organic carbon (DOC). Humic, fulvic and hydrophilic acid fractions of DOC were isolated from runoff entering lower Narragansett Bay immediately after a rainfall event and the influence of these fractions upon P. minimum growth, cell yield, photosynthesis and respiration was examined. All organic fractions stimulated growth rates and cell yields compared with controls (no organic additions), but the extent of stimulation varied with the fraction and its molecular weight. Greatest stimulations were observed with humic and fulvic acids additions; cell yields were more than 2.5 and 3.5 times higher than with hydrophilic acid additions while growth rates were 21 and 44% higher, respectively. Responses to additions of different molecular weight fractions of each DOC fraction suggest that growth rate effects were attributable to specific molecular weight fractions: the >10,000 fraction of humic acids, both the >10,000 and <500 fractions of fulvic acids and the <10,000 fraction of hydrophilic acids. The form and concentration of nitrogen (as NO₃⁻ or NH₄⁺) present also influenced P. minimum response to DOC; 10–20 μg ml⁻¹ additions of fulvic acid had no effect upon growth rates in the presence of NH₄⁺ but significantly increased growth rates in the presence of NO₃⁻, a relationship probably related to fulvic acid effects upon trace metal bioavailability and subsequent regulation of the biosynthesis of enzymes required for NO₃⁻ assimilation. The influence of DOC additions on P. minimum respiration and production rates also varied with the organic fraction and its concentration. Production rates ranged from 1.1 to 3.4 pg O₂ cell⁻¹ h⁻¹, with highest rates observed upon exposure to fulvic and hydrophilic acid concentrations of >10 μm ml⁻¹. Low concentrations (5–10 μg ml⁻¹) of humic acid had no statistically significant effect upon production, but exposure to concentrations >25 μg ml⁻¹ resulted in a 30% decrease in O₂ evolution, probably due to light attenuation by the highly colored humic acid fraction. Respiration rates ranged from 1.2 to 2.7 pg O₂ cell⁻¹ h⁻¹ and were elevated upon exposure to both fulvic and hydrophilic acids, but not to humic acid. These results demonstrate that terrestrially derived DOC fractions play an active role in stimulation of P. minimum growth via direct effects upon growth, yield and photosynthesis as well as via indirect influences such as interactions with nitrogen and effects upon light attenuation.     

Enhancement of taxane production in hairy root culture of Taxus x media var. Hicksii

This study assessed the effect of two precursors (l-phenylalanine and p-amino benzoic acid) used alone or in combination with methyl jasmonate, on the growth and accumulation of paclitaxel, baccatin III and 10-deacetylbaccatin III in hairy root cultures of Taxus x media var. Hicksii. The greatest increase in dry biomass was observed after 4 weeks of culturing hairy roots in medium supplemented with 1 μM of l-phenylalanine (6.2 g L⁻¹). Addition of 1 μM of l-phenylalanine to the medium also resulted in the greatest 10-deacetylbaccatin III accumulation (422.7 μg L⁻¹), which was not detected in the untreated control culture. Supplementation with 100 μM of l-phenylalanine together with 100 μM of methyl jasmonate resulted in the enhancement of paclitaxel production from 40.3 μg L⁻¹ (control untreated culture) to 568.2 μg L⁻¹, the highest paclitaxel content detected in the study. The effect of p-amino benzoic acid on taxane production was less pronounced, and the highest yield of paclitaxel (221.8 μg L⁻¹) was observed when the medium was supplemented with 100 μM of the precursor in combination with methyl jasmonate.Baccatin III was not detected under the conditions used in this experiment and the investigated taxanes were not excreted into the medium.     

Kinetic analyses for bindings of concanavalin A to dispersed and condensed mannose surfaces on a quartz crystal microbalance

A biotinylated mannotriose (Man3-bio) was dispersively immobilized in the matrix of biotinylated lactose (Gal-Glc-bio) on a streptavidin-covered, 27-MHz quartz crystal microbalance (QCM), and binding kinetics of concanavalin A (Con A) to Man3-bio in the Gal-Glc-bio matrix could be obtained from frequency decreases (mass increases) of the QCM. Association constants (K_a) and binding and dissociation rate constants (k_on and k_off) could be determined separately as the 1:1 and 1:2 bindings of Con A to Man3-bio on the surface. When Man3-bio was immobilized with content of 1 to 5 mol% in the matrix, the 1:1 binding of Con A to Man3-bio was obtained as K_a = (4 ± 1) × 10⁶ M⁻¹, k_on = (4 ± 1) × 10⁴ M⁻¹ s⁻¹, and k_off = (12 ± 2) × 10^–3 s⁻¹. On the contrary, when Man3-bio was immobilized with content of 20 to 100 mol% in the matrix, the 1:2 binding of Con A to Man3-bio was obtained as K_a = (14 ± 2) × 10⁶ M⁻¹, k_on = (14 ± 2) × 10⁴ M⁻¹ s⁻¹, and k_off = (7 ± 2) × 10^–3 s⁻¹. Thus, K_a for the 1:2 binding was 10 times larger than that for the 1:1 binding, with a three times larger binding rate constant (k_on) and a three times smaller dissociation rate constant (k_off). This is the first example to obtain separate kinetic parameters for the 1:1 and 1:2 bindings of lectins to carbohydrates on the surface.