Pseudomonas oleovorans as a Source of Poly(beta-Hydroxyalkanoates) for Potential Applications as Biodegradable Polyesters

Pseudomonas oleovorans was grown in homogeneous media containing n-alkanoic acids, from formate to decanoate, as the sole carbon sources. Formation of intracellular poly(beta-hydroxyalkanoates) was observed only for hexanoate and the higher n-alkanoic acids. The maximum isolated polymer yields were approximately 30% of the cellular dry weight with growth on either octanoate or nonanoate. In most cases, the major repeating unit in the polymer had the same chain length as the n-alkanoic acid used for growth, but units with two carbon atoms less or more than the acid used as a carbon source were also generally present in the polyesters formed. Indeed, copolymers containing as many as six different types of beta-hydroxyalkanoate units were formed. The weight average molecular weights of the poly(beta-hydroxyalkanoate) copolymers produced by P. oleovorans ranged from 90,000 to 370,000. In spite of the higher cell yields obtained with octanoate and nonanoate, the use of hexanoate and heptanoate yielded higher-molecular-weight polymers. These copolyesters represent an entirely new class of biodegradable thermoplastics.     

Simulation of diffusion of O 2 and CO 2 in amorphous poly(ethylene terephthalate) and related alkylene and isomeric polyesters

The diffusion of small molecules through polymers is important in many areas of polymer science, such as gas barrier and separation membrane materials, polymeric foams, and in the processing and properties of polymers. Molecular simulation techniques have been applied to study the diffusion of oxygen and carbon dioxide as small molecule penetrants in models of bulk amorphous poly(ethylene terephthalate) (PET) and related alkylene and isomeric polyesters. A bulk amorphous configuration with periodic boundary conditions made into a unit cell whose dimensions were determined for each of the simulated polyesters in the cell having the experimental density. The diffusion coefficients for O 2 and CO 2 were determined via NVE molecular dynamics simulations using the Dreiding 2.21 molecular mechanics force field over a range of temperatures (300, 500 and 600 K) using up to 3 ns simulation time. We have focussed on the influence of the temperature, polymer dynamics, number of CH 2 groups, density and free volume distribution on the diffusion properties. Correlation of diffusion coefficients with free volume and number of CH 2 groups was found.     

Linear copolymeric poly(thia-alkanedioates) by lipase-catalyzed esterification and transesterification of 3,3'-thiodipropionic acid and its dimethyl ester with alpha,omega-alkanediols

Linear copolymeric polyesters (polyoxoesters) containing thioether functions [poly(3,3'-thiodipropionic acid-co-alpha,omega-alkanediols)] were formed in good yield by esterification of an equimolar mixture of 3,3'-thiodipropionic acid (4-thiaheptane-1,7-dioic acid) and 1,6-hexanediol (weight average molecular mass, M(W) >600 Da: approximately 81% after 6 h) or 1,12-dodecanediol (M(W) > 900 Da: approximately 90% after 6 h) catalyzed by immobilized lipase B from Candida antarctica (Novozym 435) for up to 336 h in moderate vacuo without a solvent or drying reagent in the reaction mixture. Poly (3,3'-thiodipropionic acid-co-1,6-hexanediol) and poly (3,3'-thiodipropionic acid-co-1,12-dodecanediol) were extracted from the reaction mixtures using tetrahydrofurane and precipitated from tetrahydrofurane-iso-hexane (1:1, v/v) at approximately 0 degrees C. The precipitate of poly(3,3'-thiodipropionic acid-co-1,6-hexanediol) showed a maximum molecular weight of 6 x 10(5) Da corresponding to a M(W) of approximately 24,200 Da and a degree of polymerization of up to 2,150 monomer units. The precipitated poly(3,3'-thiodipropionic acid-co-1,12-dodecanediol) showed a maximum molecular weight of 8 x 10(5) Da corresponding to a M(W) of approximately 27,200 Da and a maximum degree of polymerization of up to 2,200 monomer units. The chemical structures of both polyesters containing thioether functions were confirmed by chemical derivatization and NMR spectrometry. The chemical structures of various low-molecular weight reaction intermediates of the esterification of 3,3'-thiodipropionic acid with 1,6-hexanediol were elucidated by GC-MS.     

A new strategy for recycling and preparation of poly(L-lactic acid): hydrolysis in the melt

Poly(L-lactide) [i.e., poly(L-lactic acid) (PLLA)] was hydrolyzed in the melt in high-temperature and high-pressure water at the temperature range of 180-350 degrees C for a period of 30 min, and formation, racemization, and decomposition of lactic acids and molecular weight change of PLLA were investigated. The highest maximum yield of l-lactic acid, ca. 90%, was attained at 250 degrees C in the hydrolysis periods of 10-20 min. Too-high hydrolysis temperatures such as 350 degrees C induce the dramatic racemization and decomposition of formed lactic acids, resulting in decreased maximum yield of L-lactic acid. The hydrolysis of PLLA proceeds homogeneously and randomly via a bulk erosion mechanism. The molecular weight of PLLA decreased exponentially without formation of low-molecular-weight specific peaks originating from crystalline residues. The activation energy for the hydrolysis (deltaE(h)) of PLLA in the melt (180-250 degrees C) was 12.2 kcal x mol(-1), which is lower than 20.0 kcal x mol(-1) for PLLA and 19.9 kcal x mol(-1) for poly(dl-lactide) [i.e., poly(DL-lactic acid)] as a solid in the temperature range below the glass-transition temperature (21-45 degrees C). This study reveals that hydrolysis of PLLA in the melt is an effective and simple method to obtain l-lactic acid and to prepare PLLA having different molecular weights without containing the specific low-molecular-weight chains, because of the removal of the effect caused by crystalline residues.     

Melt electrospinning of poly-(ethylene glycol-block-epsilon-caprolactone)

Various block copolymers of poly(ethylene glycol) and poly(epsilon-caprolactone) (PEG-b-PCL) with molecular weights between 7000 and 26,900 g/mol were synthesized, and melt electrospun at temperatures between 60 degrees C and 90 degrees C. Two types of fibers were collected, including excellent quality fibers - highly coiled and continuous, with a constant diameter and relatively defect free. Such fibers, termed "solid fibers", were sufficiently cooled during their path between the spinneret and the collector that the symmetric fiber shape is maintained after landing on the collector. The second type of melt electrospun fiber were poor quality, large diameter fibers, flattened on the collector - termed "molten fibers". The solid and molten fibers were morphologically distinct from each other as determined from scanning electron microscopy (SEM). Using an SEM imaging method to assess the regional variations of collected electrospun material, we found the spinneret pump rate largely influenced the fiber quality. The polymer flow rate to the spinneret and the molecular weight of PEG-b-PCL had the greatest effect on the electrospun fibers collected, with an optimum rate of 0.05-0.1 mL/h for the highest molecular weight copolymers. The lowest molecular weight PEG-b-PCL tended to electrospray, while the material collected from higher molecular weight copolymers were conducive to fiber formation. The highest quality fibers were PEG-b-PCL block copolymers (22,000 and 26,900 g/mol) melt electrospun at temperatures of 85 degrees C and 90 degrees C, corresponding to shear viscosities of the polymer of between 28.1 and 39.4 Pa.S.     

Biosynthesis and properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) polymers

In support of programs to identify polyhydroxyalkanoates with improved materials properties, we report on our efforts to characterize the mechanical and thermal properties of copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyhexanoate (3HHx). The copolyesters, having molar fraction of 3HHx ranging from 2.5 to 35 mol % and average molecular weights ranging from 1.15 x 10(5) to 6.65 x 10(5), were produced by fermentation using Aeromonas hydrophila and a recombinant strain of Pseudomonas putida GPp104. The polymers were chloroform extracted and characterized by solution-state and solid-state nuclear magnetic resonance (NMR) spectroscopy and a variety of mechanical and thermal tests. Solution-state (1)H NMR data were used to determine polymer composition-of-matter, while solution-state (13)C NMR data provided polymer-sequence information. Solvent fractionation and NMR spectroscopic characterization of these polymers showed that polymers containing up to 9.5 mol % 3HHx had a Bernoullian compositional distribution. By contrast, polymers containing more than 9.5 mol % 3HHx had a bimodal polymer composition. Solvent fractionation of these 3HHx-rich polyesters produced two polymer fractions, each of which was again consistent with Bernoullian polymerization statistics. Solid-state NMR relaxation experiments provided insight into aging in poly(3HB-co-3HHx) copolymers, demonstrating increased polymer-chain motion with increasing 3HHx content. The elongation-to-break ratio in the polyesters increased with increasing molar fraction of 3HHx monomers. Aging properties of the poly(3HB-co-3HHx) copolymers were very similar to copolymers of 3HB and 3-hydroxyvalerate (3HV). However, poly(3HB-co-3HHx) exhibited increased activation energy to thermal degradation with increasing 3HHx content.     

Accumulation of a poly(hydroxyalkanoate) copolymer containing primarily 3-hydroxyvalerate from simple carbohydrate substrates by Rhodococcus sp. NCIMB 40126

A number of taxonomically-related bacteria have been identified which accumulate poly(hydroxyalkanoate) (PHA) copolymers containing primarily 3-hydroxyvalerate (3HV) monomer units from a range of unrelated single carbon sources. One of these, Rhodococcus sp. NCIMB 40126, was further investigated and shown to produce a copolymer containing 75 mol% 3HV and 25 mol% 3-hydroxybutyrate (3HB) from glucose as sole carbon source. Polyesters containing both 3HV and 3HB monomer units, together with 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV) or 3-hydroxyhexanoate (3HHx), were also produced by this organism from certain accumulation substrates. With valeric acid as substrate, almost pure (99 mol% 3HV) poly(3-hydroxyvalerate) was produced. N.m.r. analysis confirmed the composition of these polyesters. The thermal properties and molecular weight of the copolymer produced from glucose were comparable to those of PHB produced by Alcaligenes eutrophus.     

Synthesis of poly(L-lactide) and polyglycolide by ring-opening polymerization

This protocol describes the synthesis of poly(L-lactide) by ring-opening polymerization of L-lactide using tin(II) 2-ethylhexanoate catalyst as well as the synthesis of polyglycolide by ring-opening polymerization of glycolide. Ring-opening polymerization of cyclic diesters synthesized from alpha-hydroxycarboxylic acids gives high-molecular-weight polyester in high yield. Tin(II) 2-ethylhexanoate catalyst is the most common catalyst for ring-opening polymerization of diesters owing to its high reactivity and low toxicity. Purity of monomers and the amount of water and alcohol in the reaction system are significant factors for increasing molecular weight and conversion of polyesters. The molecular weight of the polyesters is also dependent on reaction temperature and reaction time. This protocol can be completed in 3 d for the synthesis of poly(L-lactide) and 2 d for the synthesis of polyglycolide.     

High molecular weight lipids from the trilaminar outer wall (TLS)-containing microalgae Chlorella emersonii, Scenedesmus conmmunis and Tetraedron minimum

High molecular weight lipids were isolated from Chlorella emersonii, Scenedesmus communis and Tetraedron minimum, thin trilaminar outer wall (TLS)-containing freshwater microalgae producing an insoluble non-hydrolysable biopolymer (i.e. algaenan). Molecular weight determination by gel permeation chromatography indicated that their molecular weights range from ca. 400 to 2000 Da. Flash pyrolysis with in situ methylation using tetramethylammonium hydroxide (TMAH) and alkaline hydrolysis showed that the high molecular weight lipids isolated from C. emersonii and S. communis are mainly composed of saturated n-C26 and n-C28 fatty acids and alcohols and of saturated n-C30 and n-C32 alpha,omega-diols and omega-hydroxy acids. In contrast the high molecular weight lipids isolated from T. minimum are predominantly composed of long-chain fatty acids and omega-hydroxy acids. Aromatic moieties were also identified in small amounts in the thermochemolysate and in the hydrolysate. Chemical structural models containing long-chain mono- and polyesters were proposed for the high molecular weight lipids isolated from the three microalgae in agreement with analytical and spectroscopic data. Structural similarity between the outer cell wall of these microalgae and the cuticular membrane of higher plants is suggested.     

Effect of polyethylene glycol on association of muscle phosphorylase B]

It has been shown that a neutral polymer poly(ethyleneglycol) with molecular weight of 4000 and more shifts the equilibrium between the dimer and tetramer forms of phosphorylase B from rabbit skeletal muscles in the direction of formation of species with higher molecular weights. Poly(ethyleneglycol) with molecular weight below 600 has no effect on the association process. Phosphorylase B is precipitated in the form of crystals in the presence of poly(ethyleneglycol) mol. weight 40,000), when the concentration of the latter is higher than 50 mg/ml. AMP and sulfate ions are required for the crystallization process.     

In vitro hydrolytic degradation of hydroxyl-functionalized poly(alpha-hydroxy acid)s

The in vitro hydrolytic degradation of hydroxyl-functionalized poly(alpha-hydroxy acid)s was investigated. Benzyl-ether-protected hydroxyl-functionalized dilactones (S)-3-benzyloxymethyl-(S)-6-methyl-1,4-dioxane-2,5-dione (1a) and (S)-3-benzyloxymethyl-1,4-dioxane-2,5-dione (1b) were copolymerized in a melt with various amounts of L-lactide using benzyl alcohol and SnOct2 as the initiator and catalyst, respectively. The benzyl groups were removed by hydrogenation to yield polyesters with hydroxyl functional groups, poly(lactic acid-co-hydroxymethyl glycolic acid) and poly(lactic acid-co-glycolic acid-co-hydroxymethyl glycolic acid) (2a and 2b). Degradation of the hydroxyl-functionalized polyesters and poly(lactic-co-glycolic acid) (50/50) was studied by incubation of pellets of these polymers in phosphate buffer (174 mM, pH 7.4) at 37 degrees C. Polymer degradation was monitored by mass-loss measurements and by gel permeation chromatography, differential scanning calorimetry, and 1H NMR analysis. The degradation times ranging from less than 1 day (for the homopolymer of 2a) to 2 months (copolymer of 25% 2a and 75% lactide) were found. The degradation rates increased with increasing hydroxyl density of the polymers, which was associated with a switch from bulk to surface erosion. NMR and thermal analysis showed that the moieties with the hydroxyl groups were preferentially removed from the degrading polymer. In conclusion, this study shows that the degradation rate of polyesters containing 2a and 2b can be tailored from a few days to 2 months, making them very suitable for biomedical and pharmaceutical applications.     

Co- and terpolyesters based on isosorbide and succinic acid for coating applications: synthesis and characterization

Co- and terpolyesters based on succinic acid and isosorbide in combination with other renewable monomers such as 2,3-butanediol, 1,3-propanediol, and citric acid were synthesized and characterized. Linear polyesters were obtained via melt polycondensation of nonactivated dicarboxylic acids with OH functional monomers. Polymer end functionality (i.e., hydroxyl or carboxylic acid) was controlled by adjusting the monomer stoichiometry. The glass transition temperatures of the resulting polyesters could be effectively adjusted by varying the polymer composition and molar mass. By adding polyfunctional monomers such as trimethylolpropane or citric acid, polyesters with enhanced functionality were obtained. These biobased polyesters displayed functionalities and Tg values in the appropriate range for (powder) coating applications. The polyesters were cross-linked using conventional curing agents. Coatings from branched polyesters--hydroxyl as well as acid functional--showed significantly improved mechanical and chemical resistance compared to those formulated from linear polymers. These renewable polyesters proved to be suitable materials for coating applications with respect to solvent resistance, impact resistance, and hardness.     

In vitro hydrolysis of blends from enantiomeric poly(lactide)s. 3. Homocrystallized and amorphous blend films

Homocrystallized and amorphous enantiomeric blend films were prepared from the melt of high molecular weight poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) (1:1) by crystallization and quenching, respectively. A phosphate-buffered solution was used to investigate effects of homocrystallinity via in vitro hydrolysis as well as crystallization process during the hydrolysis, which was performed for a period of 24 months at 37 degrees C and pH 7.4. Results derived from gravimetry, gel permeation chromatography, and tensile testing showed that hydrolyzability was higher for the homocrystallized film than for the amorphous film. Thus, probable mechanisms are proposed for the enhanced hydrolysis of the homocrystallized blend film compared with that of the amorphous blend film. The hydrolysis rate constant (k) values of the homocrystallized and amorphous films estimated from the changes in number-average molecular weight (M(n)) were 5.00 x 10(-3) and 3.32 x 10(-3) day(-1), respectively. Moreover, hydrolyzability of equimolar enantiomeric poly(lactic acid) blends can be altered in the k range of 0.73 x 10(-3) and 5.00 x 10(-3) day(-1) by varying their crystalline species, crystallinity, or molecular weights.     

Systems Metabolic Engineering Strategies for Non‐Natural Microbial Polyester Production

Plastics, used everyday, are mostly synthetic polymers derived from fossil resources, and their accumulation is becoming a serious concern worldwide. Polyhydroxyalkanoates (PHAs) are naturally produced polyesters synthesized and intracellularly accumulated by many different microorganisms. PHAs are good alternatives to petroleum‐based plastics because they possess a wide range of material properties depending on monomer types and molecular weights. In addition, PHAs are biodegradable and can be produced from renewable biomass. Thus, producing PHAs through the development of high‐performance engineered microorganisms and efficient bioprocesses gained much interest. In addition, non‐natural polyesters comprising 2‐hydroxycarboxylic acids as monomers have been produced by fermentation of metabolically engineered bacteria. For example, poly(lactic acid) and poly(lactic acid‐co‐glycolic acid), which have been chemically synthesized using the corresponding monomers either fermentatively or chemically produced, can be produced by metabolically engineered bacteria by one‐step fermentation. Recently, PHAs containing aromatic monomers could be produced by fermentation of metabolically engineered bacteria. Here, metabolic engineering strategies applied in developing microbial strains capable of producing non‐natural polyesters in a stepwise manner are reviewed. It is hoped that the detailed strategies described will be helpful for designing metabolic engineering strategies for developing diverse microbial strains capable of producing various polymers that can replace petroleum‐derived polymers.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils.

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or a copolymer of 90% 3-hydroxybutyric acid and 10% 3-hydroxyvaleric acid was studied in soils incubated at a constant temperature of 15, 28, or 40 degrees C for up to 200 days. In addition, hydrolytic degradation in sterile buffer at temperatures ranging from 4 to 55 degrees C was monitored for 98 days. Degradation was measured through loss of weight (surface erosion), molecular weight, and mechanical strength. While no weight loss was recorded in sterile buffer, samples incubated in soils were degraded at an erosion rate of 0.03 to 0.64% weight loss per day, depending on the polymer, the soil, and the incubation temperature. The erosion rate was enhanced by incubation at higher temperatures, and in most cases the copolymer lost weight at a higher rate than the homopolymer. The molecular weights of samples incubated at 40 degrees C in soils and those incubated at 40 degrees C in sterile buffer decreased at similar rates, while the molecular weights of samples incubated at lower temperatures remained almost unaffected, indicating that molecular weight decrease is due to simple hydrolysis and not to the action of biodegrading microorganisms. The degradation resulted in loss of mechanical properties. From the samples used in the biodegradation studies, 295 dominant microbial strains capable of degrading P (3HB) and the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer in vitro were isolated and identified.(ABSTRACT TRUNCATED AT 250 WORDS)     

Synthesis and self-assembly of well-defined poly(amino acid) end-capped poly(ethylene glycol) and poly(2-methyl-2-oxazoline)

Poly(ethylene glycol) (PEG) and poly(2-methyl-2-oxazoline) (PMOx) are water-soluble, biocompatible polymers with stealth hemolytic activities. Poly(amino acid) (PAA) end-capped PEG and PMOx were prepared using amino-terminated derivatives of PEG and PMOx as macroinitiators for the ring-opening polymerization of γ-benzyl protected l-glutamate N-carboxyanhydride and S-benzyloxycarbonyl protected l-cysteine N-carboxyanhydride, respectively, in the presence of urea, at room temperature. The molecular weight of the PAA moiety was kept between M(n) = 2200 and 3000 g mol(-1). PMOx was polymerized by cationic ring-opening polymerization resulting in molecular weights of M(n) = 5000 and 10,000 g mol(-1), and PEG was a commercial product with M(n) = 5000 g mol(-1). Here, we investigate the self-assembly of the resulting amphiphilic block copolymers in water and the effect of the chemical structure of the block copolymers on the solution properties of self-assembled nanostructures. The PEG-block-poly(amino acid), PEG-b-PAA, and PMOx-block-poly(amino acid), PMOx-b-PAA, block copolymers have a narrow and monomodal molecular weight distribution (PDI < 1.3). Their self-assembly in water was studied by dynamic light scattering and fluorescence spectroscopy. In aqueous solution, the block copolymers associate into particles with hydrodynamic radii (R(H)) ranging in size from R(H) 70 to 130 nm, depending on the block copolymer architecture and the polymer molecular weight. Larger R(H) and critical association concentration values were obtained for copolymers containing poly(S-benzyloxycarbonyl-l-cysteine) compared to their poly(γ-benzyl-L-glutamate) analogue. FTIR investigations revealed that the poly(γ-benzyl-L-glutamate) block adopts a helical conformation, while the poly(S-benzyloxycarbonyl-L-cysteine) block exists as β-sheet.     

Molecular weight dependence of the poly(L-lactide)/poly(D-lactide) Stereocomplex at the air-water interface

The molecular weight dependence of poly(L-lactide)/poly(D-lactide) (PLLA/PDLA) stereocomplex behavior at the air-water interface was studied by surface pressure-area (pi-A) isotherms and atomic force microscopy (AFM). It was found that the compression-induced sterecomplexation of a PDLA/PLLA equimolar blend with high molecular weight (M(w) = 1 x 10(6) and 9.8 x 10(5), respectively) could occur at the air-water interface. This result is in marked contrast with the stereocomplexation of PDLA/PLLA blends in the bulk from the melt or in solutions, where the homocrystallites of either PLLA or PDLA rather than stereocomplex crystallites will be formed preferentially when the molecular weights of both polymers are higher than 1 x 10(5). Unexpectedly, the Langmuir-Blodgett behavior of the PDLA/PLLA blend with lower molecular weight (M(w) = 4 x 10(3) and 3.2 x 10(3), respectively), which should be favored in the stereocomplex, was distinct from that of other higher molecular weight blends. AFM images clearly disclosed for the first time the morphological changes of the equimolar blends of PLLA and PDLA at the air-water interface induced by increasing the surface pressure of the monolayer. Of particular note, the bilayer mechanism for the plateau in the isotherm was directly verified by the AFM height images.     

Biocatalytic synthesis and in vitro release of biodegradable linear polyesters with pendant ketoprofen

Enzyme-catalyzed polycondensation for the synthesis of polyester prodrugs of ketoprofen was reported. Lipase acrylic resin from Candida antarctica (CAL-B) was used to synthesize the linear polyesters with pendent ketoprofen groups based on ketoprofen glycerol ester, poly(ethylene glycol), and divinyl sebacate. The products were characterized by GPC and (1)H NMR. The results indicated that the molecular weight and yields of the polyesters depend on experimental conditions such as temperature and feed ratio. The in vitro study showed that the drug release from the polyester was slow under physiological conditions, which indicated that the polyester could be a promising prodrug with extended pharmacological effects by delayed release of ketoprofen.     

Synthetic poly(beta-hydroxyalkanoates) with carboxylic acid or primary amine pendent groups and their complexes.

Degradable polyelectrolyte complexes were made by mixing a degradable carboxyl-bearing polyacid, namely poly(beta-malic acid), with a degradable primary amine group-bearing polybase, namely poly(amino serinate), derived from serine. Both oppositely charged polyelectrolytes are functional polymers which belong to the family of poly(beta-hydroxy acid)-type aliphatic polyesters. Poly(amino serinate) polymers were synthesized by a new route starting from the N-carbobenzoxy derivative (N-Z) of DL- or L-serine. These derivatives were allowed to react with mesyl chloride to yield in one step corresponding N-protected derivatives of poly(N-Z-amino serinate) with molar masses in the 20000-40000 range after fractionation. Progressive deprotection of pendent primary amino groups was carried out using a HBr/acetic acid mixture and led to PAS with up to 95% deprotected amine repeat units for less than 15% decrease of the initial molar mass, as shown by N-reprotection with Z groups. Poly(beta-malic acid) and poly(amino serinate) were complexed by mixing aqueous solutions of the two polyelectrolytes: 1-1 neutral precipitates were formed regardless of the respective compositions, provided the molecular weights of both components were high enough. When allowed to age in aqueous media, the solid complexes went rapidly back into solution because of the hydrolytic degradation of at least one of the components. Whether the degradation of one component is affected by that of the other is still unknown.     

Synthesis of copolymers containing an active ester of methacrylic acid by RAFT: controlled molecular weight scaffolds for biofunctionalization

We report the controlled radical copolymerization of N-(2-hydroxypropyl)methacrylamide (HPMA) with a monomer containing an active ester, N-methacryloyloxysuccinimide (NMS), by reversible addition fragmentation chain transfer (RAFT). The large difference in the reactivity ratios of HPMA and NMS resulted in significant variations in copolymer composition with increasing conversion during batch copolymerization. The use of a semi-batch copolymerization method, involving the gradual addition of the more reactive NMS, allowed uniformity of copolymer composition to be maintained during the polymerization. We synthesized polymers in a wide range of molecular weights (M(n) = 3000-50,000 Da) with low polydispersities (1.1-1.3). The effect of the ratio of monomer to chain transfer agent (CTA) on the molecular weight of the polymer was investigated. Given the numerous applications of poly(HPMA)-based conjugates in designing polymeric therapeutics, these controlled molecular weight activated polymers represent attractive scaffolds for biofunctionalization. As a demonstration, we attached a peptide to the activated polymer backbone to synthesize a potent controlled molecular weight polyvalent inhibitor of anthrax toxin.