Fine mapping of the<Emphasis Type="Italic"> parthenocarpic fruit</Emphasis> (<Emphasis Type="Italic">pat</Emphasis>) mutation in tomato

The parthenocarpic fruit (pat) gene of tomato is a recessive mutation conferring parthenocarpy, which is the capability of a plant to set seedless fruits in the absence of pollination and fertilization. Parthenocarpic mutants offer a useful method to regulate fruit production and a suitable experimental system to study ovary and fruit development. In order to map the Pat locus, two populations segregating from the interspecific cross Lycopersicon esculentum × Lycopersicon pennellii were grown, and progeny plants were classified as parthenocarpic or wild-type by taking into account some characteristic aberrations affecting mutant anthers and ovules. Through bulk segregant analysis, we searched for both random and mapped AFLPs linked to the target gene. In this way, the Pat locus was assigned to the long arm of chromosome 3, as also confirmed by the analysis of a set of L. pennellii substitution and introgression lines. Afterwards, the Pat position was refined by using simple sequence repeats (SSRs) and conserved ortholog set (COS) markers mapping in the target region. The tightest COSs were converted into CAPS or SCAR markers. At present, two co-dominant SCAR markers encompassing a genetic window of 1.2 cM flank the Pat locus. Considering that these markers are orthologous to Arabidopsis genes, a positional cloning exploiting the tomato-Arabidopsis microsynteny seems to be a short-term objective.Communicated by F. Salamini     

Molecular markers linked to the apple scab resistance gene <Emphasis Type="Italic">Vbj</Emphasis> derived from <Emphasis Type="Italic">Malus baccata jackii</Emphasis>

Breeding for scab-resistant apple cultivars by pyramiding several resistance genes in the same genetic background is a promising way to control apple scab caused by the fungus Venturia inaequalis. To achieve this goal, DNA markers linked to the genes of interest are required in order to select seedlings with the desired resistance allele combinations. For several apple scab resistance genes, molecular markers are already available; but until now, none existed for the apple scab resistance gene Vbj originating from the crab apple Malus baccata jackii. Using bulk segregant analysis, three RAPD markers linked to Vbj were first identified. These markers were transformed into more reliable sequence-characterised amplified region (SCAR) markers that proved to be co-dominant. In addition, three SSR markers and one SCAR were identified by comparing homologous linkage groups of existing genetic maps. Discarding plants showing genotype–phenotype incongruence (GPI plants) plants, a linkage map was calculated. Vbj mapped between the markers CH05e03 (SSR) and T6-SCAR, at 0.6 cM from CH05e03 and at 3.9 cM from T6-SCAR. Without the removal of the GPI plants, Vbj was placed 15 cM away from the closest markers. Problems and pitfalls due to GPI plants and the consequences for mapping the resistance gene accurately are discussed. Finally, the usefulness of co-dominant markers for pedigree analysis is also demonstrated.     

Characterization and fine mapping of <Emphasis Type="Italic">RppQ</Emphasis>, a resistance gene to southern corn rust in maize

Southern corn rust (SCR) is a fungal disease caused by Puccinia polysora Underw, which can infect maize and may result in substantial yield losses in maize production. The maize inbred line Qi319 carries the SCR resistance gene RppQ. In order to identify molecular markers linked to the RppQ gene, several techniques were utilized including random amplified polymorphic DNA (RAPD), simple sequence repeat (SSR), and amplified fragment length polymorphism (AFLP). In addition, sequence characterized amplified region (SCAR) techniques combined with bulked segregant analysis (BSA) were used. Seven RAPD markers, eight SSR markers, and sixty-three AFLP primer combinations amplified polymorphisms between two parents and two bulk populations. A large F₂ population was used for genetic analysis and for fine mapping of the RppQ gene region. One AFLP polymorphic band, M-CAA/E-AGC₃₂₄, was converted to a SCAR marker, MA7, which was mapped to a position 0.46 cM from RppQ. Finally, the RppQ gene was mapped between the SCAR marker MA7 and the AFLP marker M-CCG/E-AGA₁₅₇ with distances of 0.46 and 1.71 cM, respectively.     

Molecular mapping of the <Emphasis Type="Italic">Rf1</Emphasis> gene restoring pollen fertility in PET1-based F<Subscript>1</Subscript> hybrids in sunflower (<Emphasis Type="Italic">Helianthus annuus</Emphasis> L.)

Up to now a single cytoplasmic male sterility (CMS) source, PET1, is used worldwide for hybrid breeding in sunflower. Introgression of the restorer gene Rf1, responsible for fertility restoration, into new breeding material requires tightly linked markers to perform an efficient marker-assisted selection. A survey of 520 decamer primers by bulked segregant analyses identified five RAPD markers linked to the restorer gene Rf1. In a F(2) population of 183 individuals one of the RAPD markers, OPK13_454, mapped 0.8 cM from Rf1, followed by OPY10_740 with 2 cM. Bulked segregant analyses using 48 AFLP primer combinations identified 17 polymorphisms, which could be mapped in the same linkage group as Rf1. E33M61_136, and E41M48_113 were mapped 0.3 cM and 1.6 cM from the gene, respectively. Conversion of E41M48_113 into a sequence-specific marker resulted in a monomorphic pattern. However, two of the RAPD markers, OPK13_454 and OPY10_740, were successfully converted into SCAR markers, HRG01 and HRG02, which are now available for marker-assisted selection. To investigate the utility of these SCAR markers in other cross-combinations they were tested in a set of 20 lines. Comparison of the patterns of 11 restorer and nine maintainer lines of PET1 demonstrated that the markers OPK13_454/HRG01 and HRG02 were absent in all maintainer lines but present in all restorer lines, apart from the high oleic line RHA348 and the dwarf line Gio55. In addition, restorer lines developed from the interspecific hybrids Helianthus annuus x Helianthus mollis and H. annuus x Helianthus rigidus gave the same characteristic amplification products.     

Mapping of AFLP markers linked to seed coat colour loci in<Emphasis Type="Italic"> Brassica juncea</Emphasis> (L.) Czern

Association mapping of the seed-coat colour with amplified fragment length polymorphism (AFLP) markers was carried out in 39 Brassica juncea lines. The lines had genetically diverse parentages and varied for seed-coat colour and other morphological characters. Eleven AFLP primer combinations were used to screen the 39 B. juncea lines, and a total of 335 polymorphic bands were detected. The bands were analysed for association with seed-coat colour using multiple regression analysis. This analysis revealed 15 markers associated with seed-coat colour, obtained with eight AFLP primer combinations. The marker E-ACA/M-CTG₃₅₀ explained 69% of the variation in seed-coat colour. This marker along with markers E-AAC/M-CTC₂₃₅ and E-AAC/M-CTA₂₅₀ explained 89% of the total variation. The 15 associated markers were validated for linkage with the seed-coat colour loci using a recombinant inbred line (RIL) mapping population. Bands were amplified with the eight AFLP primer combinations in 54 RIL progenies. Of the 15 associated markers, 11 mapped on two linkage groups. Eight markers were placed on linkage group 1 at a marker density of 6.0 cM, while the remaining three were mapped on linkage group 2 at a marker density of 3.6 cM. Marker E-ACA/M-CTG₃₅₀ co-segregated with Gene1 controlling seed-coat colour; it was specific for yellow seed-coat colour and mapped to linkage group 1. Marker E-AAC/M-CTC₂₃₅ (AFLP8), which had been studied previously, was present on linkage group 2; it was specific for brown seed-coat colour. Since AFLP markers are not adapted for large-scale applications in plant breeding, it is important to convert these to sequence-characterised amplified region (SCAR) markers. Marker E-AAC/M-CTC₂₃₅ (AFLP8) had been previously converted into a SCAR. Work is in progress to convert the second of the linked markers, E-ACA/M-CTG₃₅₀, to a SCAR. The two linked AFLP markers converted to SCARs will be useful for developing yellow-seeded B. juncea lines by means of marker-assisted selection.Communicated by H.F. Linskens     

Inheritance and tagging of gene regulating flowering time in the green manure crop <Emphasis Type="Italic">Sesbania rostrata</Emphasis> (Bremek. &; Obrem.)

This is the first report on genetic studies and molecular tagging of a gene regulating flowering time in the stem nodulating legume crop Sesbania rostrata (Bremek. & Obrem.). An F₂ segregating population was developed from a cross between Trombay Sesbania rostrata-1 (TSR-1, a radiation induced late flowering mutant) and S. rostrata. A phenotypic segregation ratio of 3 (normal flowering):1 (late flowering) in the F₂ generation indicated that the late flowering is governed as a monogenic recessive trait. A genotypic ratio of 1:2:1 in the F₂ generation, determined from phenotypic segregation patterns in 73 F₃ families, confirmed the monogenic inheritance of the late flowering trait. Inter Simple Sequence Repeat (ISSR) and Amplified Fragment Length Polymorphism (AFLP) marker techniques were evaluated for their applicability as genetic marker systems in this green manure crop. Using the F₂ segregating population, an ISSR marker (UBC 881₁₀₀₀) tightly linked to the trait was identified. Two linked AFLP markers GCTG₅₀₀ and CCAT₃₅₀ were also identified. They were found to be at a distance of 1.4 ± 0.034 cM and 8.0 ± 0.047 cM flanking the flowering locus respectively. The ISSR marker UBC 881₁₀₀₀ was converted into a Sequence Characterized Amplified Region (SCAR) marker. The single recessive mutation regulating the late flowering trait and the availability of tightly linked, flanking markers will help in identification and isolation of the gene controlling the flowering time trait.     

A consensus map for <Emphasis Type="Italic">Cucurbita pepo</Emphasis>

Using random amplified polymorphic DNA (RAPD), amplified fragment length polymorphism (AFLP), simple sequence repeats (SSR), and morphological traits, the first genetic maps for Cucurbita pepo (2n=2x=40) were constructed and compared. The two mapping populations consisted of 92 F₂ individuals each. One map was developed from a cross between an oil-seed pumpkin breeding line and a zucchini accession, into which genes for resistance to Zucchini Yellow Mosaic Virus (ZYMV) from a related species, C. moschata, had been introgressed. The other map was developed from a cross between an oil-seed pumpkin and a crookneck variety. A total of 332 and 323 markers were mapped in the two populations. Markers were distributed in each map over 21 linkage groups and covered an average of 2,200 cM of the C. pepo genome. The two maps had 62 loci in common, which enabled identification of 14 homologous linkage groups. Polyacrylamide gel analyses allowed detection of a high number of markers suitable for mapping, 10% of which were co-dominant RAPD loci. In the Pumpkin-Zucchini population, bulked segregant analysis (BSA) identified seven markers less than 7 cM distant from the locus n, affecting lignification of the seed coat. One of these markers, linked to the recessive hull-less allele (AW11-420), was also found in the Pumpkin-Crookneck population, 4 cM from n. In the Pumpkin-Zucchini population, 24 RAPD markers, previously introduced into C. pepo from C. moschata, were mapped in two linkage groups (13 and 11 markers in LGpz1 and LGpz2, respectively), together with two sequence characterized amplified region (SCAR) markers linked to genes for resistance to ZYMV.     

An intersubspecific genetic map of<Emphasis Type="Italic"> Lens</Emphasis>

A Lens map was developed based on the segregational analysis of five kinds of molecular and morphological genetic markers in 113 F₂ plants obtained from a single hybrid of Lens culinaris ssp. culinaris × L. c. ssp. orientalis. A total of 200 markers were used on the F₂ population, including 71 RAPDs, 39 ISSRs, 83 AFLPs, two SSRs and five morphological loci. The AFLP technique generated more polymorphic markers than any of the others, although AFLP markers also showed the highest proportion (29.1%) of distorted segregation. At a LOD score of 3.0, 161 markers were grouped into ten linkage groups covering 2,172.4 cM, with an average distance between markers of 15.87 cM. There were six large groups with 12 or more markers each, and four small groups with two or three markers each. Thirty-nine markers were unlinked. A tendency for markers to cluster in the central regions of large linkage groups was observed. Likewise, clusters of AFLP, ISSR or RAPD markers were also observed in some linkage groups, although RAPD markers were more evenly spaced along the linkage groups. In addition, two SSR, three RAPD and one ISSR markers segregated as codominant. ISSR markers are valuable tools for Lens genetic mapping and they have a high potential in the generation of saturated Lens maps.Communicated by H.C. Becker     

Molecular mapping of the rust resistance gene <Emphasis Type="Italic">R</Emphasis><Subscript><Emphasis Type="Italic">4</Emphasis></Subscript> to a large NBS-LRR cluster on linkage group 13 of sunflower

Rust is a serious fungal disease in the sunflower growing areas worldwide with increasing importance in North America in recent years. Several genes conferring resistance to rust have been identified in sunflower, but few of them have been genetically mapped and linked to molecular markers. The rust resistance gene R ₄ in the germplasm line HA-R3 was derived from an Argentinean open-pollinated variety and is still one of most effective genes. The objectives of this study were to determine the chromosome location of the R ₄ gene and the allelic relationship of R ₄ with the R _adv rust resistance gene. A total of 63 DNA markers previously mapped to linkage group (LG) 13 were used to screen for polymorphisms between two parental lines HA 89 and HA-R3. A genetic map of LG 13 was constructed with 21 markers, resulting in a total map length of 93.8 cM and an average distance of 4.5 cM between markers. Two markers, ZVG61 and ORS581, flanked the R ₄ gene at 2.1 and 0.8 cM, respectively, and were located on the lower end of LG 13 within a large NBS-LRR cluster identified previously. The PCR pattern generated by primer pair ZVG61 was unique in the HA-R3 line, compared to lines HA-R1, HA-R4, and HA-R5, which carry other R ₄ alleles. A SCAR marker linked to the rust resistance gene R _adv mapped to LG 13 at 13.9 cM from the R ₄ locus, indicating that R _adv is not an allele of the R ₄ locus. The markers tightly linked to the R ₄ gene will facilitate gene pyramiding for rust resistance breeding of sunflower.     

Mapping of a locus for adult plant resistance to downy mildew in broccoli (<Emphasis Type="Italic">Brassica oleracea</Emphasis> convar. <Emphasis Type="Italic">italica</Emphasis>)

The identification of the gene Pp523, conferring downy mildew resistance to adult plants of broccoli (Brassica oleracea convar. italica), led to the construction of a genetic map that included this resistance locus, 301 amplified fragment length polymorphisms, 55 random amplified polymorphic DNAs, 46 inter-simple sequence repeats, three simple sequence repeats, four other PCR markers and a flower colour locus, all gathered into nine major linkage groups. Nineteen additional molecular markers were clustered into one group of four markers, one group of three markers and six pairs of markers. The map spans over 731.9 cM, corresponding to 89.5% of the 818 cM estimated to be the total genome length. A significant number of the mapped markers, 19.3%, showed distorted segregation. The average distance between mapped adjacent markers is 1.64 cM, which places this map among the densest published to date for this species. Using bulked segregant analysis, we identified a group of molecular markers flanking and closely linked in coupling to the resistance gene and included these in the map. Two markers linked in coupling, OPK17_980 and AT.CTA_133/134, are located at 3.1 cM and 3.6 cM, respectively, at each side from the resistance gene. These markers can be used for marker-assisted selection in breeding programs aiming at the introgression of this gene in susceptible B. oleracea genotypes. The fine mapping of the genomic region surrounding the Pp523 resistance gene is currently being carried out, a basic condition for its isolation via positional cloning.     

Genetic mapping of <Emphasis Type="Italic">Eef1</Emphasis>, a major effect QTL for early flowering in <Emphasis Type="Italic">Eucalyptus grandis</Emphasis>

An early flowering mutant plant of Eucalyptus grandis with normal vegetative growth was found in a nursery in northern Brazil. This mutant plant flowers at approximately 90 days from germination. A cross between a wild-type (normal flowering) tree and the mutant was carried out, generating a progeny of 88 individuals where early flowering segregated in an approximate 1:1 ratio. A genome scan with 100 microsatellite markers distributed across the genome was carried out using bulk segregant analysis (BSA) on two contrasting bulks of 15 plants each. Linkages (LOD>3.0) with a major effect early flowering quantitative trait locus (QTL) were detected and confirmed by a full scale cosegregation analysis for markers EMBRA27, EMBRA60, EMBRA164, EMBRA158, EMBRA91, and EMBRA65. A localized linkage map involving the six loci and the early flowering QTL named Eucalyptus early flowering 1 (Eef1) was constructed belonging to linkage group #2 in the existing microsatellite reference map. The Eef1 locus was mapped between markers EMBRA27 and EMBRA164, with distances of 21.8 and 6.4 cM, respectively. In introgression experiments, these two markers could be successfully used with an expected precision of 98% to select plants carrying the Eef1 mutant allele, assuming no recombination interference in the genomic segment. Early flowering could be a very useful trait both in breeding as well as experimental genetics of Eucalyptus.     

Development and fine mapping of three co-dominant SCAR markers linked to the <Emphasis Type="Italic">M/m</Emphasis> gene in the cucumber plant (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L.)

Owing to its diverse sex types, the cucumber plant has been studied widely as a model for sex determination. In addition to environmental factors and plant hormones, three major genes—F/f, M/m, and A/a—regulate the sex types in the cucumber plant. By combining the bulked segregant analysis (BSA) and the sequence-related amplified polymorphism (SRAP) technology, we identified eight markers linking to the M/m locus. Among them, the two closely linked SRAP markers flanking the M/m locus were the co-dominant marker ME1EM26 and the dominant marker ME1EM23. Further, the co-dominant marker ME8SA7 co-segregated with the M/m locus. With the chromosome walking method using the cucumber genomic bacterial artificial chromosome (BAC) library, we successfully developed a co-dominant SCAR marker S_ME1EM23 from the ME1EM23 sequence. Along with the other two co-dominant SCAR markers S_ME1EM26 and S_ME8SA7 (developed from ME1EM26 and ME8SA7, respectively) in a larger segregating population (900 individuals), the M/m locus was mapped between S_ME1EM26 (5.4 cM) and S_ME1EM23 (0.7 cM), and S_ME8SA7 co-segregated with it. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Z. Li and J. Pan contribute equally to this article.     

Development of SCAR markers linked to powdery mildew (<Emphasis Type="Italic">Uncinula necator</Emphasis>) resistance in grapevine (<Emphasis Type="Italic">Vitis vinifera</Emphasis> L. and <Emphasis Type="Italic">Vitis</Emphasis> sp.)

Sequence-characterized amplified regions markers (SCARs) were developed from six randomly amplified polymorphic DNA (RAPD) markers linked to the major QTL region for powdery mildew (Uncinula necator) resistance in a test population derived from the cross of grapevine cultivars “Regent” (resistant) × “Lemberger”(susceptible). RAPD products were cloned and sequenced. Primer pairs with at least 21 nucleotides primer length were designed. All pairs were tested in the F1 progeny of “Regent” × “Lemberger”. The SCAR primers resulted in the amplification of specific bands of expected sizes and were tested in additional genetic resources of resistant and susceptible germplasm. All SCAR primer pairs resulted in the amplification of specific fragments. Two of the SCAR markers named ScORA7-760 and ScORN3-R produced amplification products predominantly in resistant individuals and were found to correlate to disease resistance. ScORA7-760, in particular, is suitable for marker-assisted selection for powdery mildew resistance and to facilitate pyramiding powdery mildew resistance genes from various sources.     

Genetic characterization and mapping of major gene resistance to potato leafroll virus in <Emphasis Type="Italic">Solanum</Emphasis><Emphasis Type="Italic">tuberosum</Emphasis> ssp. <Emphasis Type="Italic">andigena</Emphasis>

Major gene inheritance of resistance to Potato leafroll virus (PLRV) was demonstrated in a parthenogenic population derived from the highly resistant tetraploid andigena landrace, LOP-868. This major gene or chromosome region seems to control a single mechanism for resistance to infection and virus accumulation in this source. About 149 dihaploid lines segregated in a ratio of 107 resistant to 32 susceptible, fitting the expected ratio for inheritance of a duplex gene under random chromatid segregation. A tetraploid AFLP map was constructed using as reference the ultra high density (UHD) map. All AFLP markers associated with PLRV resistance mapped to the same linkage group. Map position was confirmed by analysis of previously-mapped SSR markers. Rl _adg is located on the upper arm of chromosome V, at 1 cM from its most closely linked AFLP marker, E35M48.192. This marker will be used to develop allele-specific primers or a pair of flanking PCR-based markers for their use in marker assisted selection.     

Fine mapping of a male sterility gene <Emphasis Type="Italic">MS-cd1</Emphasis> in <Emphasis Type="Italic">Brassica oleracea</Emphasis>

A dominant male sterility (DGMS) line 79-399-3, developed from a spontaneous mutation in Brassica oleracea var. capitata, has been widely used in production of hybrid cultivars in China. In this line, male sterility is controlled by a dominant gene Ms-cd1. In the present study, fine mapping of Ms-cd1 was conducted by screening a segregating population Ms79-07 with 2,028 individuals developed by four times backcrossing using a male sterile Brassica oleracea var. italica line harboring Ms-cd1 as donor and Brassica oleracea var. alboglabra as the recipient. Bulked segregation analysis (BSA) was performed for the BC₄ population Ms79-07 using 26,417 SRAP primer SRAPs and 1,300 SSRs regarding of male sterility and fertility. A high-resolution map surrounding Ms-cd1 was constructed with 14 SRAPs and one SSR. The SSR marker 8C0909 was closely linked to the MS-cd1 gene with a distance of 2.06 cM. Fourteen SRAPs closely linked to the target gene were identified; the closest ones on each side were 0.18 cM and 2.16 cM from Ms-cd1. Three of these SRAPs were successfully converted to dominant SCAR markers with a distance to the Ms-cd1 gene of 0.18, 0.39 and 4.23 cM, respectively. BLAST analysis with these SCAR marker sequences identified a collinear genomic region about 600 kb in scaffold 000010 on chromosomeA10 in B. rapa and on chromosome 5 in A. thaliana. These results provide additional information for map-based cloning of the Ms-cd1 gene and will be helpful for marker-assisted selection (MAS).     

Mapping of the oat crown rust resistance gene <Emphasis Type="Italic">Pc91</Emphasis>

Crown rust is an important disease of oat caused by Puccinia coronata Corda f. sp. avenae Eriks. Crown rust is efficiently and effectively managed through the development of resistant oat varieties. Pc91 is a seedling crown rust resistance gene that is highly effective against the current P. coronata population in North America. The primary objective of this study was to develop DNA markers linked to Pc91 for purposes of marker-assisted selection in oat breeding programs. The Pc91 locus was mapped using a population of F7-derived recombinant inbred lines developed from the cross ‘CDC Sol-Fi’/‘HiFi’ made at the Crop Development Centre, University of Saskatchewan. The population was evaluated for reaction to P. coronata in field nurseries in 2008 and 2009. Pc91 mapped to a linkage group consisting of 44 Diversity Array Technology (DArT) markers. DArTs were successfully converted to sequence characterized amplified region (SCAR) markers. Five robust SCARs were developed from three non-redundant DArTs that co-segregated with Pc91. SCAR markers were developed for different assay systems, such that SCARs are available for agarose gel electrophoresis, capillary electrophoresis, and Taqman single nucleotide polymorphism detection. The SCAR markers accurately postulated the Pc91 status of 23 North American oat breeding lines.     

Screening of population genetic SCAR markers for mykiss <Emphasis Type="Italic">Parasalmo</Emphasis> (<Emphasis Type="Italic">Oncorhynchus</Emphasis>) <Emphasis Type="Italic">mykiss</Emphasis> from Kamchatka

Using AP-PCR, the genome of Kamchatka mykiss (Parasalmo (O.) mykiss) was examined. Polymorphic fragments, implying geographic differences among the samples, were selected, cloned, and sequenced. Based on these sequences, longer, specific SCAR primers were selected and constructed. Using the BLAST software program, the sequences were analyzed for analogy to those from the GenBank database. It seemed likely that all sequences obtained belonged to earlier unexamined repeated sequences, variable in the populations of the species of interest. A total of seven SCAR markers, characterized by population-significant variability of the DNA products in Kamchatka geographic group of rainbow trout were constructed. These markers can be used for further investigation of the species Parasalmo (O.) mykiss. The SCAR marker sequences were deposited in GenBank under the accession numbers EU805500 to EU805506.     

Construction of an intraspecific linkage map of lentil (<Emphasis Type="Italic">Lens culinaris</Emphasis> ssp. <Emphasis Type="Italic">culinaris</Emphasis>)

The first intraspecific linkage map of the lentil genome was constructed with 114 molecular markers (100 RAPD, 11 ISSR and three RGA) using an F₂ population developed from a cross between lentil cultivars ILL5588 and ILL7537 which differed in resistance for ascochyta blight. Linkage analysis at a LOD score of 4.0 and a maximum recombination fraction of 0.25 revealed nine linkage groups comprising between 6 and 18 markers each. The intraspecific map spanned a total length of 784.1 cM. The markers were distributed throughout the genome, however markers were clustered in the middle or near the middle of the linkage groups, suggesting the location of centromeres. Of 114 mapped markers, 16 (14.0%) were distorted, usually at the end or middle of the linkage groups. The utility of ISSR and RGA markers for mapping in lentil was explored, and the primer with an (AC) repeat motif was found to be useful.Communicated by H.C. Becker     

Narrowing down the region of the<Emphasis Type="Italic"> Vf</Emphasis> locus for scab resistance in apple using AFLP-derived SCARs

A narrow-down strategy to restrict the Vf region, which controls resistance to the fungal disease apple scab in apple, to a genetic distance of 0.4 cM is presented. Using 11 AFLP-derived SCARs and three RAPD-derived SCARs, all linked to the Vf gene, we subjected 1,412 scab-resistant individuals from 16 mapping populations to genotype analysis. Eleven recombinant individuals were identified within a genetic distance of 0.9 cM around the Vf gene. Using these 11 recombinants, we achieved fine-resolution of several AFLP-derived SCAR markers surrounding the Vf gene, resulting in the following genetic linkage map: ACS-6 and ACS are located left of the Vf gene at genetic distances of 0.2 cM and 0.1 cM, respectively; ACS-7 and ACS-9 are inseparable from the Vf gene; ACS-8, ACS-10, and ACS-4 are located to the right of the Vf gene at genetic distances of 0.1 cM, 0.4 cM, and 0.5 cM, respectively; the remaining five SCARs—ACS-11, ACS-5, ACS-2, ACS-1, and AL07—are inseparable and are located right of the Vf gene at a genetic distance of 0.7 cM. By integrating this linkage data with our previous physical map, we generated a revised map of the narrowed-down region of Vf.Communicated by P. Langridge     

Molecular mapping of<Emphasis Type="Italic"> Fusarium oxysporum</Emphasis> f. sp.<Emphasis Type="Italic"> ciceris</Emphasis> race 3 resistance gene in chickpea

Sequence-tagged microsatellite site (STMS) and sequence-tagged site (STS) markers linked closely to Fusarium oxysporum f. sp. ciceris race 3 resistance gene in chickpea were identified, and linkage between three wilt resistance genes was elucidated. The resistance to race 3 in chickpea germplasm accession WR-315 was inherited as a single gene, designated foc-3, in 100 F₇ recombinant inbred lines derived from the cross of WR-315 (resistant) × C-104 (susceptible). The foc-3 gene was mapped 0.6 cM from STMS markers TA96 and TA27 and STS marker CS27A. Another STMS marker, TA194, at 14.3 cM, flanked the gene on the other side. Linkage between foc-3 and two other chickpea wilt resistance genes, foc-1 (syn. h ₁ ) and foc-4, was established. foc-3 was mapped 9.8 cM from foc-1 and 8.7 cM from foc-4, whereas foc-1 and foc-4 are closely linked at 1.1 cM. The identification of closely linked markers to resistance genes will facilitate marker-assisted selection for introgression of the race 3 resistance gene to susceptible chickpea lines.Communicated by H.C. Becker