Ca2+ regulation of gelsolin activity: binding and severing of F-actin.

Regulation of the F-actin severing activity of gelsolin by Ca2+ has been investigated under physiologic ionic conditions. Tryptophan fluorescence intensity measurements indicate that gelsolin contains at least two Ca2+ binding sites with affinities of 2.5 x 10(7) M-1 and 1.5 x 10(5) M-1. At F-actin and gelsolin concentrations in the range of those found intracellularly, gelsolin is able to bind F-actin with half-maximum binding at 0.14 microM free Ca2+ concentration. Steady-state measurements of gelsolin-induced actin depolymerization suggest that half-maximum depolymerization occurs at approximately 0.4 microM free Ca2+ concentration. Dynamic light scattering measurements of the translational diffusion coefficient for actin filaments and nucleated polymerization assays for number concentration of actin filaments both indicate that severing of F-actin occurs slowly at micromolar free Ca2+ concentrations. The data suggest that binding of Ca2+ to the gelsolin-F-actin complex is the rate-limiting step for F-actin severing by gelsolin; this Ca2+ binding event is a committed step that results in a Ca2+ ion bound at a high-affinity, EGTA-resistant site. The very high affinity of gelsolin for the barbed end of an actin filament drives the binding reaction equilibrium toward completion under conditions where the reaction rate is slow.     

Arabidopsis VILLIN1 generates actin filament cables that are resistant to depolymerization

Dynamic cytoplasmic streaming, organelle positioning, and nuclear migration use molecular tracks generated from actin filaments arrayed into higher-order structures like actin cables and bundles. How these arrays are formed and stabilized against cellular depolymerizing forces remains an open question. Villin and fimbrin are the best characterized actin-filament bundling or cross-linking proteins in plants and each is encoded by a multigene family of five members in Arabidopsis thaliana. The related villins and gelsolins are conserved proteins that are constructed from a core of six homologous gelsolin domains. Gelsolin is a calcium-regulated actin filament severing, nucleating and barbed end capping factor. Villin has a seventh domain at its C terminus, the villin headpiece, which can bind to an actin filament, conferring the ability to crosslink or bundle actin filaments. Many, but not all, villins retain the ability to sever, nucleate, and cap filaments. Here we have identified a putative calcium-insensitive villin isoform through comparison of sequence alignments between human gelsolin and plant villins with x-ray crystallography data for vertebrate gelsolin. VILLIN1 (VLN1) has the least well-conserved type 1 and type 2 calcium binding sites among the Arabidopsis VILLIN isoforms. Recombinant VLN1 binds to actin filaments with high affinity (K(d) approximately 1 microM) and generates bundled filament networks; both properties are independent of the free Ca(2+) concentration. Unlike human plasma gelsolin, VLN1 does not nucleate the assembly of filaments from monomer, does not block the polymerization of profilin-actin onto barbed ends, and does not stimulate depolymerization or sever preexisting filaments. In kinetic assays with ADF/cofilin, villin appears to bind first to growing filaments and protects filaments against ADF-mediated depolymerization. We propose that VLN1 is a major regulator of the formation and stability of actin filament bundles in plant cells and that it functions to maintain the cable network even in the presence of stimuli that result in depolymerization of other actin arrays.     

Depolymerization of actin filaments by profilin. Effects of profilin on capping protein function

Profilin interacts with the barbed ends of actin filaments and is thought to facilitate in vivo actin polymerization. This conclusion is based primarily on in vitro kinetic experiments using relatively low concentrations of profilin (1-5 microm). However, the cell contains actin regulatory proteins with multiple profilin binding sites that potentially can attract millimolar concentrations of profilin to areas requiring rapid actin filament turnover. We have studied the effects of higher concentrations of profilin (10-100 microm) on actin monomer kinetics at the barbed end. Prior work indicated that profilin might augment actin filament depolymerization in this range of profilin concentration. At barbed-end saturating concentrations (final concentration, approximately 40 microm), profilin accelerated the off-rate of actin monomers by a factor of four to six. Comparable concentrations of latrunculin had no detectable effect on the depolymerization rate, indicating that profilin-mediated acceleration was independent of monomer sequestration. Furthermore, we have found that high concentrations of profilin can successfully compete with CapG for the barbed end and uncap actin filaments, and a simple equilibrium model of competitive binding could explain these effects. In contrast, neither gelsolin nor CapZ could be dissociated from actin filaments under the same conditions. These differences in the ability of profilin to dissociate capping proteins may explain earlier in vivo data showing selective depolymerization of actin filaments after microinjection of profilin. The finding that profilin can uncap actin filaments was not previously appreciated, and this newly discovered function may have important implications for filament elongation as well as depolymerization.     

Tropomodulin caps the pointed ends of actin filaments

Many proteins have been shown to cap the fast growing (barbed) ends of actin filaments, but none have been shown to block elongation and depolymerization at the slow growing (pointed) filament ends. Tropomodulin is a tropomyosin-binding protein originally isolated from red blood cells that has been localized by immunofluorescence staining to a site at or near the pointed ends of skeletal muscle thin filaments (Fowler, V. M., M. A., Sussman, P. G. Miller, B. E. Flucher, and M. P. Daniels. 1993. J. Cell Biol. 120: 411-420). Our experiments demonstrate that tropomodulin in conjunction with tropomyosin is a pointed end capping protein: it completely blocks both elongation and depolymerization at the pointed ends of tropomyosin-containing actin filaments in concentrations stoichiometric to the concentration of filament ends (Kd < or = 1 nM). In the absence of tropomyosin, tropomodulin acts as a "leaky" cap, partially inhibiting elongation and depolymerization at the pointed filament ends (Kd for inhibition of elongation = 0.1-0.4 microM). Thus, tropomodulin can bind directly to actin at the pointed filament end. Tropomodulin also doubles the critical concentration at the pointed ends of pure actin filaments without affecting either the rate of extent of polymerization at the barbed filament ends, indicating that tropomodulin does not sequester actin monomers. Our experiments provide direct biochemical evidence that tropomodulin binds to both the terminal tropomyosin and actin molecules at the pointed filament end, and is the long sought-after pointed end capping protein. We propose that tropomodulin plays a role in maintaining the narrow length distributions of the stable, tropomyosin-containing actin filaments in striated muscle and in red blood cells.     

A gelsolin-like protein from Papaver rhoeas pollen (PrABP80) stimulates calcium-regulated severing and depolymerization of actin filaments

The cytoskeleton is a key regulator of plant morphogenesis, sexual reproduction, and cellular responses to extracellular stimuli. During the self-incompatibility response of Papaver rhoeas L. (field poppy) pollen, the actin filament network is rapidly depolymerized by a flood of cytosolic free Ca2+ that results in cessation of tip growth and prevention of fertilization. Attempts to model this dramatic cytoskeletal response with known pollen actin-binding proteins (ABPs) revealed that the major G-actin-binding protein profilin can account for only a small percentage of the measured depolymerization. We have identified an 80-kDa, Ca(2+)-regulated ABP from poppy pollen (PrABP80) and characterized its biochemical properties in vitro. Sequence determination by mass spectrometry revealed that PrABP80 is related to gelsolin and villin. The molecular weight, lack of filament cross-linking activity, and a potent severing activity are all consistent with PrABP80 being a plant gelsolin. Kinetic analysis of actin assembly/disassembly reactions revealed that substoichiometric amounts of PrABP80 can nucleate actin polymerization from monomers, block the assembly of profilin-actin complex onto actin filament ends, and enhance profilin-mediated actin depolymerization. Fluorescence microscopy of individual actin filaments provided compelling, direct evidence for filament severing and confirmed the actin nucleation and barbed end capping properties. This is the first direct evidence for a plant gelsolin and the first example of efficient severing by a plant ABP. We propose that PrABP80 functions at the center of the self-incompatibility response by creating new filament pointed ends for disassembly and by blocking barbed ends from profilin-actin assembly.     

Nonmuscle actin ADP-ribosylated by botulinum C2 toxin caps actin filaments

The effect of nonmuscle actin ADP-ribosylated by botulinum C2 toxin on the polymerization of nonmuscle actin was investigated in order to clarify whether nonmuscle actin is converted into a capping protein by ADP-ribosylation. ADP-ribosylated actin was found to decrease the rate of polymerization of actin filaments which are free at both ends. ADP-ribosylated actin turned out to have no effect on the rate or extent of polymerization at the pointed ends of actin filaments the barbed ends of which were capped by gelsolin. The monomer concentration reached at the final stage of polymerization was similar to the critical concentration of the pointed ends of actin filaments. The results suggest that nonmuscle actin ADP-ribosylated by botulinum C2 toxin acts as a capping protein which binds to the barbed ends to inhibit polymerization.     

Rate constant for capping of the barbed ends of actin filaments by the gelsolin-actin complex

The rate of capping of actin filaments by the gelsolin-actin complex was measured by inhibition of elongation of the barbed ends of actin filaments. Polymeric actin (0.1-1.0 microM) was added to 0.5 microM monomeric actin and various concentrations of the gelsolin-actin complex (0.08-2.4 nM) to induce nucleated polymerization. As under the experimental conditions (2 mM MgCl2, 100 mM KCl, 37 degrees C, actin monomer concentration less than or equal to 0.5 microM) actin filaments treadmilled, filaments elongated only at the barbed ends and the gelsolin-actin complex did not nucleate actin filaments to polymerize towards the pointed ends. The rate of nucleated actin polymerization in the presence of the gelsolin-actin complex was quantitatively analyzed. The rate constant for capping of the barbed ends of actin filaments by the gelsolin-actin complex was found to be about 10(7) M-1 s-1.     

Coordinated regulation of platelet actin filament barbed ends by gelsolin and capping protein

Exposure of cryptic actin filament fast growing ends (barbed ends) initiates actin polymerization in stimulated human and mouse platelets. Gelsolin amplifies platelet actin assembly by severing F-actin and increasing the number of barbed ends. Actin filaments in stimulated platelets from transgenic gelsolin-null mice elongate their actin without severing. F-actin barbed end capping activity persists in human platelet extracts, depleted of gelsolin, and the heterodimeric capping protein (CP) accounts for this residual activity. 35% of the approximately 5 microM CP is associated with the insoluble actin cytoskeleton of the resting platelet. Since resting platelets have an F- actin barbed end concentration of approximately 0.5 microM, sufficient CP is bound to cap these ends. CP is released from OG-permeabilized platelets by treatment with phosphatidylinositol 4,5-bisphosphate or through activation of the thrombin receptor. However, the fraction of CP bound to the actin cytoskeleton of thrombin-stimulated mouse and human platelets increases rapidly to approximately 60% within 30 s. In resting platelets from transgenic mice lacking gelsolin, which have 33% more F-actin than gelsolin-positive cells, there is a corresponding increase in the amount of CP associated with the resting cytoskeleton but no change with stimulation. These findings demonstrate an interaction between the two major F-actin barbed end capping proteins of the platelet: gelsolin-dependent severing produces barbed ends that are capped by CP. Phosphatidylinositol 4,5-bisphosphate release of gelsolin and CP from platelet cytoskeleton provides a mechanism for mediating barbed end exposure. After actin assembly, CP reassociates with the new actin cytoskeleton.     

ATP hydrolysis by the gelsolin-actin complex and at the pointed ends of gelsolin-capped filaments

To obtain kinetic information about the pointed ends of actin filaments, experiments were carried out in the presence of gelsolin which blocks all events at the kinetically dominant barbed ends. The 1:2 gelsolin-actin complex retains 1 mol/mol of actin-bound ATP, but it neither hydrolyzes the ATP nor exchanges it with ATP free in solution at a significant rate. On the other hand, the actin filaments with their barbed ends capped with gelsolin hydrolyze ATP relatively rapidly at steady state, apparently as a result of the continued interaction of ATP-G-actin with the pointed ends of the filaments. ATP hydrolysis during spontaneous polymerization of actin in the presence of relatively high concentrations of gelsolin lags behind filament elongation so that filaments consisting of as much as 50% ATP-actin subunits are transiently formed. Probably for this reason, during polymerization the actin monomer concentration transiently reaches a concentration lower than the final steady-state critical concentration of the pointed end. At steady state, however, there is no evidence for an ATP cap at the pointed ends of gelsolin-capped filaments, which differs from the barbed ends which do have an ATP cap in the absence of gelsolin. As there is no reason presently to think that gelsolin has any effect on events at the pointed ends of filaments, the properties of the pointed ends deduced from these experiments with gelsolin-capped filaments are presumably equally applicable to the pointed ends of filaments in which the barbed ends are free.     

Calcium dependence of villin-induced actin depolymerization

"Cutting" of actin filaments by villin was evaluated from the time course of filament depolymerization. Depolymerization was initiated by diluting polymerized actin, labeled with a fluorescent probe on either lysine-374 or cysteine-375, to a concentration well below the critical into a medium containing free villin and various concentrations of calcium (in addition to potassium and magnesium). It was observed that at high calcium concentrations (200 microM) the time course of depolymerization could not be described by the single exponential that defines it at low calcium and low villin levels. Instead, at high calcium, the exponent increased with time and the rate of depolymerization became greater than that of controls in the absence of villin. This contrasts with the inhibition of depolymerization by villin at low calcium. The latter inhibition is a consequence of the capping of the barbed filament end by villin as are the inhibition of filament elongation and the elevation of the critical concentration. Evidence is presented that the effects of villin at high calcium are the result of cutting of the actin filaments by villin. It thus appears that different calcium binding sites control capping and cutting and that the calcium binding sites regulating cutting have a much lower affinity for calcium than the sites regulating capping of the barbed filament ends.     

Kinetics of the interaction of a 41-kilodalton macrophage capping protein with actin: promotion of nucleation during prolongation of the lag period

A 41-kilodalton macrophage capping protein (MCP) has been isolated which is capable of forming complexes with actin monomers in addition to capping the barbed ends of actin filaments (Southwick & DiNubile, 1986). The protein is calcium activated in a fully reversible manner. Using kinetic assays, we determined a capping constant, defined here as a modified Kd, of 1 nM and a Kd of 3-4 microM for MCP-actin monomer complex formation. MCP weakly nucleates actin polymerization: more than 0.5 microM MCP is necessary to shorten the lag period, and 1 microM MCP at an actin/MCP ratio of 10 reduces the average length of actin filaments to about 200 molecules per filament. We determined that the actin nucleus that survives MCP inactivation contains a minimum number of five actin molecules. These experiments also make a point with respect to the interpretation of the prolongation of the lag period. We directly demonstrate that in the presence of an actin binding protein a prolongation of the lag period can be associated with increased nucleation, contrary to the usual interpretation in the literature that it indicates no or decreased nucleation by the actin binding protein.     

Kinetic analysis of F-actin depolymerization in the presence of platelet gelsolin and gelsolin-actin complexes

Platelet gelsolin (G), a 90,000-mol-wt protein, binds tightly to actin (A) and calcium at low ionic strength to form a 1:2:2 complex, GA2Ca2 (Bryan, J., and M. Kurth, 1984, J. Biol. Chem. 259:7480-7487). Chromatography of actin and gelsolin mixtures in EGTA-containing solutions isolates a stable binary complex, GA1Ca1 (Kurth, M., and J. Bryan, 1984, J. Biol. Chem. 259:7473-7479). The effects of platelet gelsolin and the binary gelsolin-actin complex on the depolymerization kinetics of rabbit skeletal muscle actin were studied by diluting pyrenyl F-actin into gelsolin or complex-containing buffers; a decrease in fluorescence represents disassembly of filaments. Dilution of F- actin to below the critical concentration required for filament assembly gave a biphasic depolymerization curve with both fast and slow components. Dilution into buffers containing gelsolin, as GCa2, increased the rate of depolymerization and gave a first order decay. The rate of decrease in fluorescence was found to be gelsolin concentration dependent. Electron microscopy of samples taken shortly after dilution into GCa2 showed a marked reduction in filament length consistent with filament severing and an increase in the number of ends. Conversely, occupancy of the EGTA-stable actin-binding site by an actin monomer eliminated the severing activity. Dilution of F-actin into the gelsolin-actin complex, either as GA1Ca1 or GA1Ca2, resulted in a decrease in the rate of depolymerization that was consistent with filament end capping. This result indicates that the EGTA-stable binding site is required and must be unoccupied for filament severing to occur. The effectiveness of gelsolin, GCa2, in causing filament depolymerization was dependent upon the ionic conditions: in KCI, actin filaments appeared to be more stable and less susceptible to gelsolin, whereas in Mg2+, actin filaments were more easily fragmented. Finally, a comparison of the number of kinetically active ends generated when filaments were diluted into gelsolin versus the number formed when gelsolin can function as a nucleation site suggests that gelsolin may sever more than once. The data are consistent with a mechanism where gelsolin, with both actin-binding sites unoccupied, can sever but not cap F-actin. Occupancy of the EGTA-stable binding site yields a gelsolin-actin complex that can no longer sever filaments, but can cap filament ends.     

Microscopic evidence that actin-interacting protein 1 actively disassembles actin-depolymerizing factor/Cofilin-bound actin filaments

Actin-depolymerizing factor (ADF)/cofilin and gelsolin are the two major factors to enhance actin filament disassembly. Actin-interacting protein 1 (AIP1) enhances fragmentation of ADF/cofilin-bound filaments and caps the barbed ends. However, the mechanism by which AIP1 disassembles ADF/cofilin-bound filaments is not clearly understood. Here, we directly observed the effects of these proteins on filamentous actin by fluorescence microscopy and gained novel insight into the function of ADF/cofilin and AIP1. ADF/cofilin severed filaments and AIP1 strongly enhanced disassembly at nanomolar concentrations. However, gelsolin, gelsolin-actin complex, or cytochalasin D did not enhance disassembly by ADF/cofilin, suggesting that the strong activity of AIP1 cannot be explained by simple barbed end capping. Barbed end capping by ADF/cofilin and AIP1 was weak and allowed filament elongation, whereas gelsolin or gelsolin-actin complex strongly capped and inhibited elongation. These results suggest that AIP has an active role in filament severing or depolymerization and that ADF/cofilin and AIP1 are distinct from gelsolin in modulating filament elongation.     

Chimeric and truncated gCap39 elucidate the requirements for actin filament severing and end capping by the gelsolin family of proteins.

gCap39 is an actin filament end-capping protein which has a threefold repeated domain structure similar to the N-terminal half of gelsolin. However, unlike gelsolin, gCap39 does not sever actin filaments and dissociates completely from filament ends after calcium removal. We have capitalized on these differences to explore the structural basis for actin filament capping, severing, and their regulation. Using truncated gCap39, generated by limited proteolysis or deletion mutagenesis, we found that actin filament capping requires multiple gCap domains, and almost the entire molecule is necessary for optimal activity. gCap39 domain I, like the equivalent domain in gelsolin, contains an actin monomer binding site. gCap39 domains II-III are, however, different from gelsolin in that they do not bind to the side of actin filaments. Since filament side binding is hypothesized to be the first step in severing, lack of side binding may explain why gCap39 does not sever. This is confirmed directly by swapping gCap39 domains II-III for the side-binding gelsolin domains to generate a chimera which severs actin filaments. The chimera is Ca2+ independent in actin filament severing and capping, although gCap39 domain I itself is regulated by Ca2+.     

Direct observation of actin filament severing by gelsolin and binding by gCap39 and CapZ

Dynamic behavior of actin filaments in cells is the basis of many different cellular activities. Remodeling of the actin filament network involves polymerization and depolymerization of the filaments. Proteins that regulate these behaviors include proteins that sever and/or cap actin filaments. This report presents direct observation of severing of fluorescently-labeled actin filaments. Coverslips coated with gelsolin, a multi-domain, calcium-dependent capping and severing protein, bound rhodamine-phalloidin-saturated filaments along their length in the presence of EGTA. Upon addition of calcium, attached filaments bent as they broke. Actophorin, a low molecular weight, monomer sequestering, calcium-independent severing protein did not sever phalloidin-saturated filaments. Both gCap 39, a gelsolin-like, calcium-dependent capping protein that does not sever filaments, and CapZ, a heterodimeric, non-calcium-dependent capping protein, bound the filaments by one end to the coverslip. Visualization of individual filaments also revealed severing activity present in mixtures of actin-binding proteins isolated by filamentous actin affinity chromatography from early Drosophila embryos. This activity was different from either gelsolin or actophorin because it was not inhibited by phalloidin, but was calcium independent. The results of these studies provide new information about the molecular mechanisms of severing and capping by well-characterized proteins as well as definition of a novel type of severing activity.     

Arabidopsis capping protein (AtCP) is a heterodimer that regulates assembly at the barbed ends of actin filaments

The precise regulation of actin filament polymerization and depolymerization is essential for many cellular processes and is choreographed by a multitude of actin-binding proteins (ABPs). In higher plants the number of well characterized ABPs is quite limited, and some evidence points to significant differences in the biochemical properties of apparently conserved proteins. Here we provide the first evidence for the existence and biochemical properties of a heterodimeric capping protein from Arabidopsis thaliana (AtCP). The purified recombinant protein binds to actin filament barbed ends with Kd values of 12-24 nM, as assayed both kinetically and at steady state. AtCP prevents the addition of profilin actin to barbed ends during a seeded elongation reaction and suppresses dilution-mediated depolymerization. It does not, however, sever actin filaments and does not have a preference for the source of actin. During assembly from Mg-ATP-actin monomers, AtCP eliminates the initial lag period for actin polymerization and increases the maximum rate of polymerization. Indeed, the efficiency of actin nucleation of 0.042 pointed ends created per AtCP polypeptide compares favorably with mouse CapZ, which has a maximal nucleation of 0.17 pointed ends per CapZ polypeptide. AtCP activity is not affected by calcium but is sensitive to phosphatidylinositol 4,5-bisphosphate. We propose that AtCP is a major regulator of actin dynamics in plant cells that, together with abundant profilin, is responsible for maintaining a large pool of actin subunits and a surprisingly small population of F-actin.     

Capping Protein Terminates but Does Not Initiate Chemoattractant-induced Actin Assembly in Dictyostelium

The first step in the directed movement of cells toward a chemotactic source involves the extension of pseudopods initiated by the focal nucleation and polymerization of actin at the leading edge of the cell. We have previously isolated a chemoattractant-regulated barbed-end capping activity from Dictyostelium that is uniquely associated with capping protein, also known as cap32/34. Although uncapping of barbed ends by capping protein has been proposed as a mechanism for the generation of free barbed ends after stimulation, in vitro and in situ analysis of the association of capping protein with the actin cytoskeleton after stimulation reveals that capping protein enters, but does not exit, the cytoskeleton during the initiation of actin polymerization. Increased association of capping protein with regions of the cell containing free barbed ends as visualized by exogenous rhodamine-labeled G-actin is also observed after stimulation. An approximate threefold increase in the number of filaments with free barbed ends is accompanied by increases in absolute filament number, whereas the average filament length remains constant. Therefore, a mechanism in which preexisting filaments are uncapped by capping protein, in response to stimulation leading to the generation of free barbed ends and filament elongation, is not supported. A model for actin assembly after stimulation, whereby free barbed ends are generated by either filament severing or de novo nucleation is proposed. In this model, exposure of free barbed ends results in actin assembly, followed by entry of free capping protein into the actin cytoskeleton, which acts to terminate, not initiate, the actin polymerization transient.     

Different calcium dependence of the capping and cutting activities of villin

The concentration of ionized calcium required for the capping of barbed filament ends by villin is about 4 orders of magnitude lower than that required for the cutting activity of villin. Capping was 50% complete at about 10-30 nM Ca2+, a level expected in resting cells, whereas the cutting rate was half-maximal at about 200 microM, making it possible to completely separate filament capping from filament cutting. Analysis of capping in terms of coupled equilibria between calcium binding to villin and calcium-villin binding to the barbed ends of actin filaments gives a value of 10(16)-10(17) M-2 for the product of the two binding constants. By comparison the binding constant reported for the rapidly exchanging calcium sites on villin is 2 X 10(5) M-1 and that for binding of calcium-saturated villin to barbed ends has a minimum value of 10(11) M-1 giving a product of 2 X 10(16) M-1. The close similarity of the two sets of values suggests that capping is regulated by the rapidly exchanging calcium sites on villin. In terms of coupled equilibria the calcium requirement for filament capping decreases with increasing concentrations of free villin. The scant information on the mechanism of cutting allows only an estimate of the maximal value for the calcium-binding constant of the site regulating cutting which is about 2-5 X 10(3) M-1. Cutting is followed by rapid capping of the newly released barbed ends.     

Equilibrium constant for binding of an actin filament capping protein to the barbed end of actin filaments

Depolymerization of treadmilling actin filaments by a capping protein isolated from bovine brain was used for determination of the equilibrium constant for binding of the capping protein to the barbed ends of actin filaments. When the capping protein blocks monomer consumption at the lengthening barbed ends, monomers continue to be produced at the shortening pointed ends until a new steady state is reached in which monomer production at the pointed ends is balanced by monomer consumption at the uncapped barbed ends. In this way the ratio of capped to uncapped filaments could be determined as a function of the capping protein concentration. Under the experimental conditions (100 mM KCl and 2 mM MgCl2, pH 7.5, 37 degrees C) the binding constant was found to be about 2 X 10(9) M-1. Capping proteins effect the actin monomer concentration only at capping protein concentrations far above the reciprocal of their binding constant. Half-maximal increase of the monomer concentration requires capping of about 99% of the actin filaments. A low proportion of uncapped filaments has a great weight in determining the monomer concentration because association and dissociation reactions occur at the dynamic barbed ends with higher frequencies than at the pointed ends.     

Kinetic analysis of F-actin depolymerization in polymorphonuclear leukocyte lysates indicates that chemoattractant stimulation increases actin filament number without altering the filament length distribution

The rate of filamentous actin (F-actin) depolymerization is proportional to the number of filaments depolarizing and changes in the rate are proportional to changes in filament number. To determine the number and length of actin filaments in polymorphonuclear leukocytes and the change in filament number and length that occurs during the increase in F-actin upon chemoattractant stimulation, the time course of cellular F-actin depolymerization in lysates of control and peptide-stimulated cells was examined. F-actin was quantified by the TRITC-labeled phalloidin staining of pelletable actin. Lysis in 1.2 M KCl and 10 microM DNase I minimized the effects of F-actin binding proteins and G-actin, respectively, on the kinetics of depolymerization. To determine filament number and length from a depolymerization time course, depolymerization kinetics must be limited by the actin monomer dissociation rate. Comparison of time courses of depolymerization in the presence (pointed ends free) or absence (barbed and pointed ends free) of cytochalasin suggested depolymerization occurred from both ends of the filament and that monomer dissociation was rate limiting. Control cells had 1.7 +/- 0.4 x 10(5) filaments with an average length of 0.29 +/- 0.09 microns. Chemo-attractant stimulation for 90 s at room temperature with 0.02 microM N-formylnorleucylleucylphenylalanine caused a twofold increase in F-actin and about a two-fold increase in the total number of actin filaments to 4.0 +/- 0.5 x 10(5) filaments with an average length of 0.27 +/- 0.07 microns. In both cases, most (approximately 80%) of the filaments were quite short (less than or equal to 0.18 micron). The length distributions of actin filaments in stimulated and control cells were similar.