A biolayer interferometry-based assay for rapid and highly sensitive detection of biowarfare agents

Biolayer interferometry (BLI) is an optical technique that uses fiber-optic biosensors for label-free real-time monitoring of protein–protein interactions. In this study, we coupled the advantages of the Octet Red BLI system (automation, fluidics-free, and on-line monitoring) with a signal enhancement step and developed a rapid and sensitive immunological-based method for detection of biowarfare agents. As a proof of concept, we chose to demonstrate the efficacy of this novel assay for the detection of agents representing two classes of biothreats, proteinaceous toxins, and bacterial pathogens: ricin, a lethal plant toxin, and the gram-negative bacterium Francisella tularensis, the causative agent of tularemia. The assay setup consisted of biotinylated antibodies immobilized to the biosensor coupled with alkaline phosphatase-labeled antibodies as the detection moiety to create nonsoluble substrate crystals that precipitate on the sensor surface, thereby inducing a significant wavelength interference. It was found that this BLI-based assay enables sensitive detection of these pathogens (detection limits of 10 pg/ml and 1 × 10⁴ pfu/ml ricin and F. tularensis, respectively) within a very short time frame (17 min). Owing to its simplicity, this assay can be easily adapted to detect other analytes in general, and biowarfare agents in particular, in a rapid and sensitive manner.     

Telomerase catalyzed fluorescent probes for sensitive protein profiling based on one-dimensional microfluidic beads array

A nucleic acid-based signal amplified method for multiple proteins detection based on one-dimensional beads array using telomerase catalyzed fluorescent probes has been developed in this paper. The biotin labeled fluorescent probes were synthesized by telomerase in homogeneous solution. Approximately 360-480 fluorescein molecules were inserted in each probe. The limit of detection for p53 protein is 1.1 pM (S/N=3) and a 3 orders of linear dynamic range is obtained. The sensitivity is nearly two orders higher than the two-site "sandwich" immunoassay using the same platform. Using this method, cellular p53 protein contents of as few as 85 CNE2 cells per mul sample can be determined specifically. The expression changes of p53, c-myc and beta-actin in CNE2 cells were further examined as a function of anti-cancer drug treatment, and the results are consistent with our previous reports. Compared with immuno-polymerase chain reaction and immuno-rolling circle amplification, this method is simple, fast, cheap and suitable for multi-protein analysis. The multiplexed proteins profiling of cellular samples should facilitate the new opportunities to the fundamental research of tumor development and progression, especially to the low abundant tumor-associated proteins analysis.     

A quantitative peptide array for evaluation of protein kinase activity

Peptide array, which is known as an emerging technology, has been developed for identification of protein kinase activity. For this purpose, the ability of quantitative analysis is very important because the absolute change in protein kinase activity is critical for the determination of cellular function. Here we report an original type of peptide array for quantitative evaluation of protein kinase activity by fluorescence imaging. We used the peptide array for the quantitative evaluation of the nonreceptor tyrosine kinase c-Src activity as a model for detecting protein kinase activities. By using positive and negative control peptides, we obtained the actual ratio of tyrosine phosphorylation of substrate peptide not only by purified c-Src but also by c-Src in cell lysate. In addition, the experimental approach provided simple immobilization of peptide. Our sensitive, specific, and high-throughput peptide array can be used for quantitative evaluation of kinase activity and potentially can be applied to drug discovery and screening.     

A rapid multiplex DNA suspension array method for Salmonella typhimurium subtyping using prophage-related markers

In this study we developed a preliminary proof of concept of method for Salmonella typhimurium subtyping using multiplex PCR-based phage locus typing and a multiplex Luminex DNA suspension array for product detection. Thirty markers were selected from prophages ST64B, ST64T, ST104, P22, Gifsy-1, sopEΦ and mostly phage-related AFLP fragments, and organised into two multiplex PCRs of 15 markers each. A two-group DNA suspension array was developed using a combination of flow cytometry and Luminex xMAP® technology. To assess its subtyping capability the method was applied to 438 non-epidemiological related S. typhimurium isolates of 56 phage types. Eighty-one profiles were generated. Isolates were divided into sixteen main prophage marker profile types. There was a strong tendency for isolates with the same phage type to have the same or closely related profiles and for groups of phage types to share the same profile. The discriminatory power of this method expressed as the Simpson's Index of Diversity (D) was 0.954. A panel of 12 selected markers achieved almost the same D value (0.952) as the 30 markers. This new method provides an alternative typing scheme for S. typhimurium epidemiological investigations. The developed array is in a high-throughput format which could easily be semi-automated, making the test fast and economical.     

A simple and rapid method for isolating myelin basic protein

The conduction of impulses along axons of nerves is facilitated by the myelin sheath, composed of proteins and lipid. Myelin basic proteins (MBPs) are extrinsic membrane proteins that play an important role in the structural organization of the myelin sheath. In the central nervous system, MBPs account for 30-40% of total protein. The traditional method of MBP isolation involves the use of chloroform-ethanol, which would destroy the native form of MBP. A modified method for maintaining its native form was developed. The white matter of porcine brain was directly extracted by buffers containing different concentrations of sodium chloride owing to MBP solubilized at high concentration of NaCl. The MBP was further purified by cation exchange chromatography and buffers containing glycine and salts. Purified MBP were consistently obtained by this method.     

A simple and rapid GC/MS method for the simultaneous determination of gaseous metabolites

We modified and tuned a commercial model of a gas chromatography/mass spectrometry (GC/MS) instrument to develop a simple and rapid method for the simultaneous quantification of a variety of gas species. Using the developed method with the newly modified instrument, gas species such as H₂, N₂, O₂, CO, NO, CH₄, CO₂, and N₂O, which are common components of microbial metabolism, were accurately identified based on their retention times and/or mass-to-charge ratios (m/z) in less than 2.5 min. By examining the sensitivities and dynamic ranges for the detection of H₂, N₂, O₂, CH₄, CO₂, and N₂O, it was demonstrated that the method developed in this study was sufficient for accurately monitoring the production and the consumption of these gaseous species during microbial metabolism. The utility of the new method was demonstrated by a denitrification study with Pseudomonas aureofaciens ATCC 13985^T. This method will be suitable for a variety of applications requiring the identification of gaseous metabolites in microorganisms, microbial communities, and natural ecosystems.     

A simple and rapid method for the detection of contaminants in a bioreactor

Chromatographic detection of particles with 0.05 to 10.0 μm in diameter by using a capillary tube is reported. Retention times of particles depended on their diameter. Complete peak separation was observed in the chromatogram of a mixture of particles with 0.05 and 10.0 μm in diameter. The application of this technique as detecting method for contaminants in a bioreactor is considered.     

A new method of preparing fiber-optic DNA biosensor and its array for gene detection

A new method of preparing fiber-optic DNA biosensor and its array for the simultaneous detection of multiple genes is described. The optical fibers were first treated with poly-1-lysine, and then were made into fiber-optic DNA biosensors by adsorbing and immobilizing the oligonucleotide probe on its end. By assembling the fiber-optic DNA biosensors in a bundle in which each fiber carried a different DNA probe, the fiber-optic DNA biosensor array was well prepared. Hybridization of fluorescent- labeled cDNA ofp53 gene,N-ras gene andRb1 gene to the DNA array was monitored by CCD camera. A good result was achieved.     

Dissecting DNA-protein and protein-protein interactions involved in bacterial transcriptional regulation by a sensitive protein array method combining a near-infrared fluorescence detection

The protein array methodology is used to study DNA-protein and protein-protein interactions governing gene expression from the Bacillus stearothermophilus PargCo promoter-operator region. Using probes labelled with near-infrared fluorescence dyes with exitation characteristics close to 700 or 800 nm, it is possible to detect signals from proteins (purified or non-purified in Escherichia coli cell extracts) immobilised on a nitrocellulose membrane with a high sensitivity (almost 12 amol of a spotted protein for protein-DNA interactions). Protein array data are confirmed by other methods indicating that molecular interactions of the order 10(-7) M can be monitored with the proposed protein array approach. We show that the PargCo region is a target for binding at least three types of regulatory proteins, ArgR repressors from thermophilic bacteria, the E. coli RNA polymerase alpha subunit and cyclic AMP binding protein CRP. We also demonstrate that the high strength of the PargC promoter is related to an upstream element that binds to the E. coli RNA polymerase alpha subunit.     

A simple method for enhancing hybridization efficiency in chromosome and array comparative genomic hybridization

Abstract

The accuracy of comparative genomic hybridization (CGH) analysis is affected by hybridization efficiency. We describe here a simple method for enhancing hybridization efficiency. The hybridization procedure is essentially the same as that of conventional methods. Hybridization solution containing denatured DNA probe mixture was applied to a metaphase chromosome slide or DNA chip slide and covered with a coverslip. In the new method, however, the slide was inverted by turning the coverslip downward prior to hybridization. We termed this method the inverted slide method. To estimate the efficiency of the new method, metaphase chromosome slides and DNA chip slides were treated by both the conventional and inverted slide methods and incubated in a moist chamber at 37°C for 12, 24, 48, and 72 h. Hybridization signals were approximately 1.5 to 2 times brighter on the slides using the inverted slide method than those using the conventional method after 48 and 72 h of incubation. Furthermore, topographical differences in fluorescence intensity were smaller in slides using the inverted-slide method than in those prepared by the conventional method. The inverted slide method is methodologically very simple and improves the resolution of CGH.     

A rapid and simple method for staining of the crystal protein ofBacillus thuringiensis

Summary A rapid and simple method of staining for the crystal protein (-endotoxin or parasporal body) ofBacillus thuringiensis has been developed. Changes in colonial morphology were observed when cells lost their ability to form crystal protein or both crystal protein and spore.     

Direct protein detection with a nano-interdigitated array gate MOSFET

A new protein sensor is demonstrated by replacing the gate of a metal oxide semiconductor field effect transistor (MOSFET) with a nano-interdigitated array (nIDA). The sensor is able to detect the binding reaction of a typical antibody Ixodes ricinus immunosuppressor (anti-Iris) protein at a concentration lower than 1 ng/ml. The sensor exhibits a high selectivity and reproducible specific detection. We provide a simple model that describes the behavior of the sensor and explains the origin of its high sensitivity. The simulated and experimental results indicate that the drain current of nIDA-gate MOSFET sensor is significantly increased with the successive binding of the thiol layer, Iris and anti-Iris protein layers. It is found that the sensor detection limit can be improved by well optimizing the geometrical parameters of nIDA-gate MOSFET. This nanobiosensor, with real-time and label-free capabilities, can easily be used for the detection of other proteins, DNA, virus and cancer markers. Moreover, an on-chip associated electronics nearby the sensor can be integrated since its fabrication is compatible with complementary metal oxide semiconductor (CMOS) technology.     

A simple and rapid liquid chromatography method for simultaneous determination of zidovudine and nevirapine in plasma

We describe a simple, fast, isocratic, reversed-phase high performance liquid chromatographic method for simultaneous determination of plasma zidovudine and nevirapine with UV detection at 260 nm. The method involves liquid-liquid extraction with ethyl acetate and using 3-isobutyl 1-methyl xanthine as internal standard. The system requires a C(18) column (150 mm x 4.6 mm I.D.) and a mobile phase composed of potassium dihydrogen phosphate (15 mM; pH 7.5) and acetonitrile in the ratio of 80:20 (v/v). The assay was linear from 0.025 to 10.0 microg/ml for zidovudine and 0.05 to 10.0 microg/ml for nevirapine. The intra- and inter-day variations were less than 10% for both the drugs. The method was specific and sensitive enough to allow quantification of zidovudine and nevirapine in concentrations observed clinically. The average recoveries of zidovudine and nevirapine from plasma were 95 and 94%, respectively. The method was applied to a pharmacokinetic study in HIV-infected patients who were receiving antiretroviral treatment with zidovudine and nevirapine containing regimens. The method spans the blood concentration range of clinical interest. Due to its simplicity, the assay can be used for pharmacokinetic studies and therapeutic drug monitoring in patients taking a combination treatment of zidovudine and nevirapine.     

A simple and rapid method for detection of the 106Gln mutation in Wilson-Konovalov disease

A simple and rapid method for detecting the 1069Gln mutation in gene ATP7B based on a PCR specific for this allele has been developed. The 1069Gln mutation is the main cause of Wilson disease (WD) in Russia and accounts for approximately 40% of all mutant alleles of gene ATP7B. Therefore, the method proposed makes the postnatal and prenatal diagnosis of Wilson disease in Russia considerably more rapid and less expensive.     

A novel genotypic test for rapid detection of multidrug-resistant Mycobacterium tuberculosis isolates by a multiplex probe array

AIMS: To develop and evaluate a novel genotypic test for rapid detection of rifampicin and isoniazid resistance of multidrug-resistant (MDR) Mycobacterium tuberculosis isolates by a multiplex probe array. METHODS AND RESULTS: A multiplex probe array was designed for genotypic test to simultaneously screen the mutations of rpoB, katG, inhA and ahpC genes, associated with rifampin and isoniazid resistance in M. tuberculosis, with a probe detecting one of the recently confirmed genetic markers of isoniazid resistance ahpC-6 and -9 locus added. By using the genotypic test developed, 52 MDR isolates were identified, among which 46 isolates had mutations in rpoB (88.5%) and 45 at codon 315 of katG, regulatory region of inhA and oxyR-ahpC intergenic region (86.5%), whereas all 35 susceptible isolates identified showed a wild-type hybridization pattern. The sensitivity and specificity were 88.5% and 100% for rifampicin resistance, and 86.5% and 100% for isoniazid resistance, respectively. CONCLUSION: A rapid and simultaneous detection of rifampicin and isoniazid resistance caused by the mutations of rpoB, katG, inhA and ahpC genes in M. tuberculosis isolates could be achieved by a multiplex probe array developed. SIGNIFICANCE AND IMPACT OF THE STUDY: This genotypic test protocol has the potential to be developed on clinical application for the rapid detection of drug resistant M. tuberculosis isolates before an efficient chemotherapy is initiated.     

Fabrication of an antibody microwell array with self-adhering antibody binding protein

One of the promising methods of preparing antibody arrays is immobilizing antibodies with protein A or protein G, each of which binds specifically to the heavy chain constant (Fc) region of immunoglobulin G (IgG). In this system, antibody immobilization efficiency depends on the number of active Fc binding proteins that need to be immobilized on the surface. Here we have designed and constructed an Fc binding protein with a self-adhering ability that can be immobilized on the hydrophobic surface by simple adsorption. It consists of an Fc binding domain of protein G (G3) and hydrophobic domain of elastin (E72). Direct observation revealed its self-adhering ability on the hydrophobic surface. The enzyme-linked immunosorbent assay (ELISA) showed that it retained antibody binding ability on the surface. The antibody array model was prepared on a hydrophobic microwell glass slide with E72G3, which specifically detect the antigen with a sevenfold greater sensitivity than the G3-treated slide. These results suggest that the E72G3 is useful for simple and effective immobilization of antibodies and can be used to fabricate any immuno devices.     

A novel screening method based on menadione mediated rapid reduction of tetrazolium salt for testing of anti-mycobacterial agents

A microplate-based rapid, inexpensive and robust technique is developed by using tetrazolium salt 2, 3-bis [2-methyloxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxanilide (XTT) and menadione to determine the viability of Mycobacterium tuberculosis, Mycobacterium bovis BCG and Mycobacterium smegmatis bacilli in microplate format. In general, XTT reduction is an extremely slow process which takes almost 24 h to produce a detectable signal. Menadione could drastically induce this reduction to an almost equal extent within a few minutes in a dose dependent manner. The reduction of XTT is directly proportional to the cell concentration in the presence of menadione. The standardized protocol used 200 μM of XTT and 60 μM of menadione in 250 μl of cell suspension grown either in aerobic or anaerobic conditions. The cell suspension of M. bovis BCG and M. tuberculosis were incubated for 40 min before reading the optical density at 470 nm whereas M. smegmatis was incubated for 20 min. Calculated Signal/Noise (S/N) ratios obtained by applying this protocol were 5.4, 6.4 and 9.4 using M. bovis BCG, M. tuberculosis and M. smegmatis respectively. The calculated Z′ factors were > 0.8 for all mycobacterium bacilli indicating the robustness of the XTT Reduction Menadione Assay (XRMA) for rapid screening of inhibitors. The assay protocol was validated by applying 10 standard anti-tubercular agents on M. tuberculosis, M. bovis BCG and M. smegmatis. The Minimum Inhibitory Concentration (MIC) values were found to be similar to reported values from Colony Forming Unit (CFU) and REMA (resazurin microplate assay) assays. Altogether, XRMA is providing a novel anti-tubercular screening protocol which could be useful in high throughput screening programs against different physiological stages of the bacilli.