Harvesting of the Kelp Ecklonia Maxima in South Africa Affects Its Three Obligate, Red Algal Epiphytes

In South Africa, more than 7000 t (f wt) of kelp (Ecklonia maxima) fronds are harvested annually to feed cultured abalone. Carpoblepharis flaccida, Gelidium vittatum and Polysiphonia virgata are conspicuous red algal epiphytes on older kelps and provide habitat and food for numerous animals. Over 4.5 y, we examined the effects of one destructive harvest of E. maxima on these 3 epiphytes. Two 20 × 20 m plots of kelp with similar epiphyte loads were demarcated. In one, all E. maxima sporophytes with stipes longer than 50 cm were harvested. The other plot served as a control. After 2.5 y the biomass of E. maxima in the harvested plot had recovered to control levels, but the epiphyte load (g epiphytes. Kg kelp⁻¹) was statistically lower in the harvested plot after 2.5 and 3.5 y, and only recovered after 4.5 y. While most commercial harvesters cut through the “heads” (primary blades) of the kelp, effectively killing them, a new, non-lethal method removes secondary blades 20–30 cm from their bases, leaving the meristems and primary blades intact. At 5 sites studied, G. vittatum and P. virgata were found almost entirely on stipes and primary blades, and harvesting only distal parts of secondary blades limited losses to about 50% of C. flaccida biomass. To protect epiphytes, non-lethal harvesting is recommended and permanent non-harvest zones have been established in addition to limiting kelp yields and disallowing harvesting in Marine Protected Areas.     

Changes in the population structure of Ascophyllum nodosum (L.) Le Jolis due to mechanical harvesting

The use of a Norwegian suction cutter to harvest populations of the brown alga Ascophyllum nodosum (L.) Le Jolis in southwestern Nova Scotia started in 1985. The impact of this type of mechanical harvest on the algal population structure was evaluated. Changes in the length and density of individual plants (clumps) within 0.25 m^–2 quadrats, as well as the length of individual shoots within clumps were monitored before and after an experimental harvest. The mechanical harvest cut mainly the longer plants, thus changed the initial bimodal size structure of the population to unimodal. There was a 20 to 36% plant mortality, reducing the plant density from 92.6 to 73.6 individuals m^–2. Pre-harvest size distribution of the tagged shoots was skewed to the right and became more normal after the harvest. Tagged shoots in the harvested quadrats suffered a 42% mortality as compared to 11% of those in the control quadrats. An understanding of the impact of the mechanical harvesting on the harvested population is essential in the design of a management strategy. Sources of variation in the impact of mechanical harvest include the tide level at time of harvest, length of time the machine operated in one site, skill of the machine operator, and sharpness of the machine cutting blades.     

Micropropagation of Hemidesmus indicus for cultivation and production of 2-hydroxy 4-methoxy benzaldehyde

Caulogenic responses of various explant types from 12-month-old plants of Hemidesmus indicus were tested. Second and third visible nodes (0.5 cm) from the apex and root segments (0.5 cm) were the most and least regenerative respectively, with the formation of 9.37 and 2.6 shoots in 4 weeks on half strength MS medium supplemented with 2.22 μM BA and 1.07 μM NAA and 4.44 μM BA and 2.69 μM NAA respectively. Caulogenic ability of the nodes decreased with increasing maturity. Shoot buds initiated upon the young nodes on day 10 developed into 7.2 cm long shoots within 4 weeks thereby making a shoot elongation phase unnecessary. Nodal explants of the in vitro raised shoots subcultured in the same medium produced 9.32 shoots of 7.1 cm length in 3–4 weeks, similar to those of the mature plant-derived nodes. Multiplication through subculture of the nodes up to 25 passages of 4 weeks each was achieved without decline. Shoot cultures were rooted in quarter salt strength MS medium containing 9.8 μM IBA and the rooted plants were hardened for establishment in pots at 96% rate. Four months after establishment, the micropropagated plants were stable and showed uniform morphological and growth characteristic. After 12 months of cultivation in the field, on an average micropropagated plant consisted of 4–5 shoots, 5–8 branches per shoot and increased root biomass (13.5 g) compared to the poor growth (single shoot and 2–3 branches) and root production (4.6 g) values obtained with plants raised from conventional rooted stem cuttings. The concentration of the root specific compound, 2-hydroxy 4-methoxy benzaldehyde per plant was 2–3 fold higher in micropropagated plants though on unit dry root biomass (0.12% per g dry wt) basis it remained the same between two sources of plants. This revised version was published online in June 2006 with corrections to the Cover Date.     

The potential for seaweed resource development in subarctic Canada; Nunavik,Ungava Bay

Ungava Bay is ice covered 6–7 months of the year and evidence of ice scouring of seaweeds is extensive in the intertidal and shallow subtidal. Maximum tidal amplitudes of 16 m, among the highest in Canadian waters, compound this impact. Despite this level of annual perturbation, very extensive and dense beds of fucoids in the intertidal and laminarians in the subtidal are common on the western shores of Ungava Bay. Ground surveys of 24 intertidal stations combined with satellite images delineated 82,000 tons standing crop of Fucus vesiculosus and Fucus evanescens in Payne Bay, of which 36,000 tons were considered harvestable. Subtidally, kelp cover reached peak biomass at 5–10 m consisting of three primary species, Saccharina longicruris, Laminaria digitata, and Laminaria solidungula. In the area of Payne Bay, kelp beds of 100 ha were common, averaging 9–12 kg m⁻² wet weight. The productivity of brown algae at these latitudes has been assumed to be low relative to southern latitudes. Direct measurement of lineal growth indicates productivity is intermediate between arctic and temperate populations. The potential for medium level industrial harvest exists under conservative management strategies within the constraints of subarctic logistics.     

Expansion of <Emphasis Type="Italic">Phragmites australis</Emphasis> (Cav.) Trin. ex Steud. (Common Reed) into <Emphasis Type="Italic">Typha</Emphasis> spp. (Cattail) Wetlands in Northwestern Indiana,USA

Expansion of Phragmites australis (Cav.) Trin. ex Steud. (common reed) into stands of Typha spp. (cattail; Typha australis L. and T. x glauca) is common in the wetlands of northwestern Indiana (USA). To understand this phenomenon better, we investigated the production of shoot sprouts and proportional allocation of biomass as well as a potential role for the water table in the relative dominance of each species. The reduction in sprouts from rhizomes upon vegetative expansion of Phragmites appeared to be the most likely process causing the decline of Typha. The latter had a shoot density of 39/m² in plots without Phragmites, but this dropped to 13 shoots m⁻² in plots that had been invaded by Phramites. Such a decline was likely caused by reduced reserves; e.g., the belowground biomass of Typha decreased from 11.3 g m⁻² without Phragmites to 8.1 g m⁻² with Phragmites. The latter also reduced its belowground biomass but not its shoot density in the presence of Typha. The mean weight of Phragmites shoots was 2.9 g, and nearly all produced inflorescences. Meanwhile, Typha failed to develop spadices despite its shoots having a greater biomass (7 g). This suggests that Phragmites is more efficient than Typha in shoot growth. Springtime flooding appeared to promote the sprout of Typha shoots from shallow rhizomes (≈18 cm below the soil surface), whereas the shoot density of Phragmites showed no correlation with water level in that season. Deep-rooted Phragmites (≈39 cm) occurred on both high and low water-table sites, whereas the shallow-rooted Typha was limited to only the former. Phragmites will likely continue its expansion, by vegetative sprouts from rhizomes, into Typha wetlands.     

An evaluation of the mortality of the brown seaweed <Emphasis Type="Italic">Ascophyllum nodosum</Emphasis> (L.) Le Jol. produced by cutter rake harvests in southern New Brunswick,Canada

Ascophyllum nodosum (rockweed) landings in the Atlantic Maritime provinces of Canada totalled 36,500 wet tonnes in 2009. Due to the relative slow growth, stochastic recruitment, and the importance of habitat protection, strict harvest regulations are in place in the region to maintain the integrity of this resource. Special harvesting rakes have been designed to cut the plants and not to dislodge the clumps and their holdfasts from the substratum. However, for various reasons, close to 6% of the biomass harvested annually contains holdfast material. This proportion is closely monitored by the province as it is assumed to represent clump mortality. However, due to the complex structure of A. nodosum clumps, this relationship with mortality is not simple. A study was carried out to evaluate the real impact of this detachment on the A. nodosum population of southern New Brunswick in 2004. The structure of harvested A. nodosum clumps with associated holdfast material was analyzed and compared to non-harvested clumps from the same harvest area. Results showed that when a rake strips a clump, it only detaches 17.4% of the holdfast surface, leaving 36.8% of the plant biomass and 80.3% of the shoot density intact. An analysis of storm-cast material from the same study area showed a similar effect in the clump structure, although the incidence of holdfast in the detached biomass could be as high as 30%. Due to the high biomass detached each year by coastal storms in New Brunswick, their impact on the A. nodosum resource is 21 times higher than the annual harvest.     

Clonal integration and effects of simulated herbivory in old-field perennials

Summary We compared the growth, phenology and leaf demography of partly defoliated, connected shoots with that of partly defoliated, severed shoots in four old-field perennials (Solidago canadensis, S. altissima, S. gigantea, Aster lanceolatus) with differing genet architectures (rhizome systems), in a common garden and in the field. Our main hypothesis was that defoliation would have fewer negative effects on shoot performance if shoots were connected than if their rhizomes were severed. Since degree of clonal integration is related to differences in genet architecture, our second hypothesis was that the effects of defoliation would be less pronounced in more integrated than in less integrated clones. Removing about 50% of the total leaf area from shoots had different effects depending on plant species, shoot density, and in particular whether rhizome connections between shoots were left intact or severed. In agreement with our prediction, experimentally isolated shoots in the field or in high density clumps in the garden suffered the most from defoliation, while shoots with intact connections or in low density clumps suffered the least. Our second prediction was neither confirmed nor falsified in the present study. Solidago altissima showed overcompensation in response to simulated herbivory in the common garden, i.e. defoliated shoots grew faster and were larger at harvest than their non-defoliated neighbours.     

Management of Phragmites australis in Swiss fen meadows by mowing in early summer

Mowing experiments were carried out from1995 to 2001 in Swiss fen meadows toinvestigate whether the abundance of Phragmites australis is reduced by mowingin early summer in addition to mowing inautumn. Experimental plots of 100 m²were established in three fen meadows thatare mown every year in September; treatedplots received an additional cut in lateJune either every year or every two years.Until 1997, the additional cut had noeffect on the above-ground biomass of Phragmites (monitored every year in lateJune). As from 1998, the biomass of Phragmites was 25–30% lower in the plotswith annual June cut than in the controlplots. However, the pooled biomass of allother plant species decreased similarly, sothat the degree of dominance of Phragmites was not reduced. An additionalJune cut every two years had no effect onthe biomass of Phragmites. In June2001, the shoots of Phragmites weresmaller in annually June-cut plots than incontrol plots, but allometric relationshipsbetween shoot length and diameter, shootgrowth from June to August, and nitrogenand phosphorus concentrations of shoots didnot differ between June-cut and controlplots. The additional June cut increasedthe total export of N with the hay by 18%,and that of P by 50% in 2001. Theseadditional nutrient exports were smallerthan those found in the first years of theexperiment and not larger for Phragmites than for the remainder of thevegetation. Together, the results suggestthat a depletion of below-ground storescaused Phragmites to decrease afterseveral years of additional mowing in June.Eighty further permanent quadrats in fenmeadows with normal management (mownannually in September) were surveyed in1995–96 and in 2001. The above-groundbiomass of Phragmites increasedduring this time in 49 out of 80 plots,with a mean relative difference of +35.5%.Thus, even if additional mowing in earlysummer only slightly reduced theperformance of Phragmites compared toplots mown only in September, thistreatment might help to prevent the speciesfrom spreading under the current conditionsin Swiss fen meadows.     

Seasonal growth and biomass ofTrapa japonica Flerov in Ojaga-Ike Pond,Chiba, Japan

In order to determine the seasonal growth and biomass ofTrapa japonica Flerov, field observations were carried out at Ojaga-ike Pond, Chiba, Japan, during 1979 and 1980. In spring, the plant showed exponential growth (c. 0.080 g g⁻¹ day⁻¹) and shoot elongation was as rapid as 10 cm day⁻¹. The plant attained its maximum biomass (380.5±35.1 g m⁻²) in late August, and about 50% of this was concentrated in the topmost 30-cm stratum (645.7±33.1 g m⁻³); maximum total stem length exceeded 6m. The plant produced large (500–800 mg per fruit), but small numbers of nut-like fruit (maximum, 5 fruits per rosette). Defoliation occurred almost linearly with time at a rate of 30.6 leaves m⁻² day⁻¹; annual net leaf production was estimated to be about twice as large as the seasonal maximum leaf biomass. While the number of leaves per rosette showed moderate seasonal change, rosette density, rosette area and leaf dry weight changed considerably during the year. From the negative log-log correlation between mean total leaf dry weight per rosette and rosette density, density-dependent rosette growth was assumed. The cause of the wide spread of this species in aquatic habitats is briefly discussed in terms of its seed size and morphology.     

Growth strategy of the stoloniferous rattan Calamus javensis in Mt. Halimun, Java

Calamus javensis is a widespread understorey rattan in Southeast Asia and is one of the dominant rattan species in Mt. Halimun National Park, West Java. This species can establish clumps either sexually with seeds or clonality with stolons. To analyze the role of sexual reproduction and clonality for clump establishment in C. javensis, we studied the vegetative and genetic structures of the population. Totals of 2,777 ramets comprising 1,321 clumps were found in three 0.16 ha plots. The number of ramets per clump showed reverse J-shaped distribution with a maximum of 15. Clustering and stoloniferous ramets accounted for 62 and 20% of all ramets, respectively. This indicates that C. javensis is actively engaged in clustering clonal growth. The longest stem was 14 m although 75% of all stems were shorter than 1 m long. The stolon ranged from 6 to 538 cm in length, which decreased the local density of ramets. Using randomly amplified polymorphic DNA (RAPD) analysis, we obtained 56 polymorphic bands for 118 clumps sampled from one of the plots. All samples showed different RAPD banding patterns, except one pair at a distance of 225 cm from each other. The genetic similarity among samples closer than 10 m was significantly higher than the expected value from a purely random distribution. These results suggest that most separate clumps are established by recruitment from seeds, and most seeds dispersed near mother plants. Hence, in C. javensis, clonality is more a growth strategy to increase the size of the genet than a dispersion-propagation strategy to expand the habitat.     

First Record of Undaria Pinnatifida (Laminariales, Phaeophyta) in Southern Patagonia, Argentina

The Japanese kelp Undaria pinnatifida was found on 7th September 2005 in Ría Deseado (Santa Cruz, Argentina). This invasive algae was registered from the lower intertidal to the upper levels of the subtidal zone. The sporophytes were fixed to slabs, gravel and rocks of variable sizes and were also present as epibionts of tunicates. The sporophytes total length ranged between 3 and 88 cm, with a mean of 28.75 cm in the intertidal and 38.3 cm in the subtidal. The density and biomass increased from the intertidal to the subtidal. The kelp population showed a higher number of small immature individuals in the intertidal than␣subtidal where the organisms were bigger and with more individual biomass. This first record of U. pinnatifida in Southern Patagonia extends its southern distribution limit in Argentina, showing progressive expansion in the southwestern Atlantic. More surveys must be conducted to understand the evolution of U. pinnatifida invasion and its impact on the native benthic community.     

Pilot-scale culture of adventitious roots of ginseng in a bioreactor system

A pilot-scale culture of multiple adventitious roots of ginseng was established using a balloon-type bubble bioreactor. Adventitious roots (2 cm) induced from callus were cultured in plastic Petri dishes having 20 ml of solid Schenk and Hildebrandt (1972) medium containing 3% sucrose, 0.15% gelrite, and 24.6 μM indole-3-butric acid. An average of 29 secondary multiple adventitious roots were produced after 4 weeks of culture. These secondary roots were elongated on the same medium, reaching a length of 5 cm after 6 weeks of culture. A time course study revealed that maximum yields in 5-l and 20-l bioreactors were approximately 500 g and 2.2 kg at day 42 with 60 g and 240 g inoculations, respectively. Cutting twice during the culture increased the total amount of biomass produced. The root biomass in a 20-l balloon-type bubble bioreactor was 2.8 kg at harvest with 240 g of inoculum after 8 weeks of culture. The total saponin content obtained from small-scale and pilot-scale balloon type bubble bioreactors was around 1% based on dry weight. Inoculation of 500 g fresh weight of multiple adventitious roots into a 500 l balloon-type bubble bioreactor with cutting at 4 and 6 weeks after inoculation produced approximately 74.8 kg of multiple roots. The ginsengnoside profiles of these multiple adventitious roots were similar to profiles of field-grown ginseng roots when analyzed by HPLC. This revised version was published online in June 2006 with corrections to the Cover Date.     

Biology of the bamboo Chusquea culeou (Poaceae: Bambusoideae) in southern Argentina

Over a period of 7 years the biology and phenotypic variability of Chusquea culeou were studied at 5 locations in cool temperate forests of southern Argentina. Excavated rhizomes had an average of 1.1 successful rhizome buds, and an average of 2.1 years elapsed between successive generations of rhizomes. Rhizome buds usually develop within the first four years after a rhizome forms. Height, volume and weight of a culm can be calculated from its diameter 1 m above the ground. Culm size, length of foliage leaf blades, and pattern of secondary branching differed among study sites. Dead culms were numerous and commonly remained erect for more than 7 years after dying. New culm shoots appear in spring and reach full size within a few months. Shoots can grow more than 9 cm/day. Less than half of the shoots survived a year; most were killed by moth larvae. Multiple primary branch buds emerge through the culm leaf sheaths in the second spring. The mean number of branch buds at mid-culm nodes varied between 34.8 and 81.5, and the mean number of primary branches was between 22.8 and 40.8. Number and length of branches, and number and length of foliage leaf blades at each node is related to the position of the node on a culm. Most branches grow about 3 cm and produce 1 to 3 foliage leaves annually. Foliage leaf blades generally live 2 years or more; few survive 6 years. Relative lengths of foliage leaf blades and their spacing along a branch permit recognition of annual cohorts.Both gregarious and sporadic flowering have been reported, and every year a few isolated plants flower and die. Length of the life cycle is unknown. Seedlings require up to 15 years to produce culms of mature size. Foliage branches may live more than 23 years, and culms may survive 33 years. Extensive loss of new shoots to predation suggests that gregarious flowering may be driven by a need to escape parasitism. C. culeou clumps expand slowly. Average annual rate of increase of the number of live culms in a clump was 4.6%. Methods of seed dispersal are undocumented. A dense stand of Chusquea culeou had an estimated phytomass of 179 tons/hectare (dry weight), 28% of which was underground. Net annual production was about 16 t/ha dry weight.     

Clonal organization of populations of Asarum europaeum and Maianthemum bifolium in contrasting woodland habitats

Populations of two rhizomatous species, Asarum europaeum (asarabacca) and Maianthemum bifolium (May lily), were examined in two, and four forest habitats respectively, in the Roztocze National Park (south-eastern Poland). May lily populations were studied in habitats: the Carpathian beechwood, upland mixed fir forest, subboreal moist mixed coniferous forest and bog-alder forest. Asarabacca was studied in two habitats: beechwood and Scots pine community (an 80-year-old plantation). In both the species studied intra- and inter-populational differences of the size of genets in terms of above- and below-ground parts of individuals as well as the biomass and area occupied were observed. In May lily populations the greatest mean number of shoots per genet was found in the fir forest (11.62±3.29), a value almost twice as great as that in the moist coniferous forest and nearly three times greater than in the bog-alder forest. Total rhizome length was also the greatest in the fir forest (351.9±98.7 cm) followed by moist coniferous forest, beechwood and alder forest habitats. In all populations of May lily a greater part of total dry weight biomass is in below-ground organs. The greatest biomass value of a genet was found in the fir forest (4.275 g), the smallest in the bog-alder forest (0.110 g). All populations differed significantly in terms of leaf area, leaf length (with the exception of fir forest and beechwood habitats where the values were the greatest), and leaf width (excluding moist coniferous and bog-alder forests which had the smallest values). In the case of asarabacca, both the mean number of ramets per genet (3.36±0.45 vs. 2.49±0.20) and total rhizome length (40.3±6.4 cm vs. 21.1±1.8 cm) were greater in the beechwood habitat than in the pine community. In the first population genets had 3–5 times greater the total biomass of those from the pine community. Only genets of the latter had proportionately more dry weight biomass in above-ground parts. It seems to be correlated with greater rhizome dieback and disintegration of genets into smaller units. Both populations were significantly different in terms of all examined parameters of leaves. Genets of both the species studied were found to have their own structure of developmental phases that often differed for shoots and rhizomes.     

Biomass allocation between extension- and leaf display-oriented shoots in relation to habitat differentiation among five deciduous liana species in a Japanese cool-temperate forest

Liana species have a variety of habitat preferences. Although morphological traits connected to resource acquisition may vary by habitat preference, few studies have investigated such associations in lianas. In previous work on temperate lianas, we observed (1) free standing leafy shoots and (2) climbing shoots that clung to host plants; we examined relationships between habitat preference and shoot production patterns in five liana species. Among the five species, two were more frequent at the forest edges (forest-edge species), and two were more common within the forests (forest-interior species). The proportion of climbing shoots in current-year shoot mass of young plants (3–8 m in height) was greater in the forest-edge species (45–60%) than in the forest-interior species (6–30%). In consequence, there was a greater leaf mass ratio in the total current-year shoots of forest-interior species. This, combined with a greater specific leaf area, endows forest-interior species with a leaf area per unit shoot mass double that of forest-edge species. Forest-edge species had longer individual climbing shoots whose length per unit stem mass was smaller than in forest-interior lianas. Extension efficiency, measured as the sum of the climbing stem length per unit current-year shoot mass, was thus similar between forest-edge and interior species. In conclusion, liana shoot production patterns were related to species habitat preferences. A trade-off between current potential productivity (leaves) and the ability to search for hosts and/or well-lit environments (climbing stems) may underpin these relationships.     

Population dynamics,productivity and biomass allocation ofZizania latifolia in an aquatic-terrestrial ecotone

The population and production ecology of aZizania latifolia stand at a sheltered shore of the Hitachi-Tone River were investigated. Shoot emergence was observed twice a year; the fist was a synchronized shoot emergence in April and the second was from August to October. Aboveground biomass was mostly occupied by leaves and peaked at 1500 g dry weight m⁻² in August. The belowground biomass also reached its peak, 750 g dry weight m⁻², in August. The secondary shoots were small in spite of their high density. Leaves were produced continuously throughout the season. The leaf life span was as short as 55.6 days for cohorts that emerged from May through to September. Total annual net production ofZ. latifolia could be more than 3400 g dry weight m⁻². Shoot clusters of several centimeters were observed in April. The following self-thinning caused a regular distribution of the remaining shoots in August. Most shoots produced in August to October were found near a shoot persisting since April. They showed more concentrated distribution than shoots in April. A large biomass allocation to leaves and the ability to produce many clump shoots during the late growing period may facilitate dominance ofZ. latifolia in relatively sheltered sites.     

Introduction of asymbiotically propagated seedlings of <Emphasis Type="Italic">Cephalanthera falcata</Emphasis> (Orchidaceae) into natural habitat and investigation of colonized mycorrhizal fungi

Asymbiotic seedling propagation and introduction of seedlings into a natural habitat were achieved for Cephalanthera falcata. For immature seeds collected 65 days after pollination, high germination rate (av. 50%) was achieved on Hyponex agar medium plates. Root development occurred in about 10% of the protocorms 5 months after seed sowing. Rooted protocorms were transferred to a culture bottle containing 100 ml of the Hyponex agar medium and incubated continually. In about 30% of the transferred individuals, shoot height reached 1.5–2 cm 8 months after the transfer. After acclimatization in wet vermiculite at 4°C for 6 months, 135 individuals were planted in a natural stand of C. falcata in mid February 2001. Shoot appearance rate was 44.4% at the first year and flowering was noted in some plants. At the fifth year, shoots with an average height of 21.6 cm still appeared in four plants, and flowering was noted in three of them. Colonization of mycorrhizal fungi was examined in two of them as well as one wild plant, in which the mycorrhizal fungi were identified to be in Thelephoraceae or Russulaceae. These fungi are known to form ectomycorrhiza with trees, and thus a tripartnership symbiosis consisting of C. falcata, mycorrhizal fungi and trees was suggested. The involvement of ectomycorrhizal fungi might be the reason for the low survival rate in the field experiment, because the distribution of ectomycorrhizal fungi relevant to this orchid is assumed to be uneven. The possibility of introducing artificially propagated orchids into natural habitats was discussed.     

Chemical weed management in wheat at higher altitudes

To evaluate the effect of different herbicides for controlling weeds in wheat (variety Fakhr-i-Sarhad),at higher attitude, an experiment was conducted at Agriculture Research Station, Chitral during Rabi season 2003-04, using Randomized Complete Block Design, keeping four replications. The experiment, sown in November comprised of eight treatments, viz; seven herbicides and a weedy check. Each treatment consisted of 5 rows each 30 cm apart and 5 m long thus giving a total size of 5 m x 1.5 m. The herbicides used included; terbutryn + triasulfuron at 0.16 kg, 2,4-D at 0.7 kg, fenoxaprop-P-ethyl at 0.93 kg, clodinafop at 0.05 kg, bromoxynil + MCPA at 0.49 kg, carfentrazon-ethyl at 0.02 kg and isoproturon at 1.0 kg a.i ha(-1). The data were recorded on weed kill efficiency (%), fresh weed biomass (kg ha(-1)), plant height (cm), spike length (cm), number of tillers m(-2), number of grains spike(-1), thousand grains weight (g), biological yield (kg ha(-1)), grain yield (kg ha(-1)) and harvest index (%). The data recorded on weed kill efficiency, weed biomass (kg ha1), grains yield (kg ha(-1)) and harvest index (%) were significantly affected by the different herbicidal treatments. Statistically isoproturon treatment exhibited the best performance, with maximum weed kill efficiency (48.26%) and minimum fresh weed biomass (433.3 kg ha(-1)) as compared to weedy check (6 %) and (1102 kg ha(-1)), respectively. Similarly, the spike length (8.34 cm), number of tillers (427 m(-2)), number of grains spike(-1) (38.0), thousand grains weight (39.85 g), biological yield (8475 kg ha(-1)), grain yield (2530 kg ha(-1)) and harvest index (31.3%) were the highest in isoproturon treatments as compared to weedy check having (7.64 cm), (356 m(-2)), (34.1), (37.12 g), (6858 kg), (1913 kg ha(-1)) and (27%), respectively.     

Impact of the arundo wasp,Tetramesa romana (Hymenoptera: Eurytomidae), on biomass of the invasive weed,Arundo donax (Poaceae: Arundinoideae), and on revegetation of riparian habitat along the Rio Grande in Texas

An invasive grass, Arundo donax, occupies thousands of hectares of arid riparian habitat along the Rio Grande in Texas and Mexico, and has negative impacts on national security, water resources, and riparian ecosystems. The shoot-tip-galling wasp Tetramesa romana was released in 2009 between Brownsville and Del Rio, Texas, and has dispersed over 800?km along the river channel. Plots along the river were surveyed for shoot counts of arundo and all other plant species in 2016 at seven sites in regions in which prior studies had documented a 22% decline in arundo biomass (estimated from live shoot length) from 2007 to 2014. Estimated live biomass declined a further 32% between 2014 and 2016. Native plants accounted for 86% of the 44 species encountered in plots. Individual plots averaged five plant species, and arundo was most abundant in only 9 of 21 plots. Arundo live biomass and shoot density were negatively associated with plant diversity, indicating that live arundo interferes with germination and/or survival of other plant species. The proportion of dead shoots in plots, proportion of wasp-galled shoots, and density of exit holes made by emerging adult wasps per metre live main shoot length were positively associated with plant diversity in a combined model. Regressions indicated that the effects of wasp damage measures on diversity were mediated through their effects on main shoot mortality. By reducing live arundo biomass, the arundo wasp is fostering recovery of native plant communities at riparian sites along the Rio Grande.     

Age estimation, growth, maturity and distribution of the roundnose grenadier from the Rockall trough

This paper summarizes the history of commercial exploitation of roundnose grenadier Coryphaenoides rupestris in the North Atlantic. Length frequencies of C. rupestris in 1993, from 400 to 1200 m on the slopes of the Rockall trough indicate a reduction since the 1970s in the modal length of fish found at 700–1000 m. Ages ranged from 2 to 50 years for males and 2 to 60 years for females, with most between 10–38 years. Females attained a greater asymptotic pre-anus length ( L _∞=19.5 cm) than males ( L _∞=15.5 cm) and had a greater weight for a given age (male W _∞=761g, female W _∞=1132g). This species may have a protracted spawning period. Using pre-anus lengths, 50% of male fish were mature at 10 cm (ages 8–10) while 50% of female fish were mature at 12 cm (ages 9–11). At the greatest depths sampled the length frequency of fish was bimodal with a hiatus between 9 and 11 cm (ages 8–12). Highest catch rates occurred on the Donegal slope in September at a depth of 800–1000 m.