Effect of Cyclodextrin Complexation on the Aqueous Solubility and Solubility/Dose Ratio of Praziquantel

Praziquantel (PZQ), the primary drug of choice in the treatment of schistosomiasis, is a highly lipophilic drug that possesses high permeability and low aqueous solubility and is, therefore, classified as a Class II drug according to the Biopharmaceutics Classification System (BCS). In this work, β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used in order to determine whether increasing the aqueous solubility of a drug by complexation with CDs, a BCS-Class II compound like PZQ could behave as BCS-Class I (highly soluble/highly permeable) drug. Phase solubility and the kneading and lyophilization techniques were used for inclusion complex preparation; solubility was determined by UV spectroscopy. The ability of the water soluble polymer polyvinylpyrolidone (PVP) to increase the complexation and solubilization efficiency of β-CD and HP-β-CD for PZQ was examined. Results showed significant improvement of PZQ solubility in the presence of both cyclodextrins but no additional effect in the presence of PVP. The solubility/dose ratios values of PZQ-cyclodextrin complexes calculated considering the low (150 mg) and the high dose (600 mg) of PZQ, used in practice, indicate that PZQ complexation with CDs may result in drug dosage forms that would behave as a BCS-Class I depending on the administered dose.     

Effect of polyamidoamine (PAMAM) dendrimers on the in vitro release of water-insoluble nifedipine from aqueous gels

The objective of this study was to determine the effect of ethylenediamine core PAMAM dendrimers, on the release of nifedipine suspended in aqueous gels and to correlate release to the increase in solubility afforded by the dendrimers. Drug release from aqueous 5% HPMC gels containing nifedipine (2% wt/vol) through 0.2-μm membranes was measured using Enhancer cells and 50% ethanolic solution as the receptor medium. The release from gels containing PAMAM G-3 and G-5 (0.25%–1% wt/vol) was compared with gels containing the cosolvent isopropyl alcohol (10%–80% vol/vol). PAMAM dendrimers significantly increased the solubility of nifedipine. This caused a significant increase in the release rate of nifedipine from the gel suspensions. The increase in drug release depended on the concentration and generation size of the dendrimers added. For higher generations (G-5) lower concentrations were needed to obtain equivalent increases in release. Although the increase in solubility and release was not as high as from gels containing high concentrations of the cosolvent isopropyl alcohol, the dendrimers prevented the recrystallization of the drug that was observed when the gels containing isopropyl alcohol were left open. Published: October 24, 2005     

Enhanced Solubility,Stability, and Transcorneal Permeability of Delta-8-Tetrahydrocannabinol in the Presence of Cyclodextrins

The purpose of this study was to investigate the effect of cyclodextrins (CDs) on aqueous solubility, stability, and in vitro corneal permeability of delta-8-tetrahydrocannabinol (Δ⁸-THC). Phase solubility of Δ⁸-THC was studied in the presence of 2-hydroxypropyl-β-cyclodextrin (HPβCD), randomly methylated-β-cyclodextrin (RMβCD) and sulfobutyl ether-β-cyclodextrin sodium salt (SβCD). Stability of Δ⁸-THC in 5% w/v aqueous CD solutions, as a function of pH, was studied following standard protocols. In vitro corneal permeation of Δ⁸-THC (with and without CDs) across excised rabbit cornea was also determined. Phase-solubility profile of Δ⁸-THC in the presence of both HPβCD and RMβCD was of the A_P type, whereas, with SβCD an A_L type was apparent. Aqueous solubility of Δ⁸-THC increased to 1.65, 2.4, and 0.64 mg/mL in the presence of 25% w/v HPβCD, RMβCD, and SβCD, respectively. Significant degradation of Δ⁸-THC was not observed within the study period at the pH values studied, except for at pH 1.2. Transcorneal permeation of Δ⁸-THC was dramatically improved in the presence of CDs. The results demonstrate that CDs significantly increase aqueous solubility, stability, and transcorneal permeation of Δ⁸-THC. Thus, topical ophthalmic formulations containing Δ⁸-THC and modified beta CDs may show markedly improved ocular bioavailability.     

Encapsulation of Resveratrol Using Water-in-Oil-in-Water Double Emulsions

The suitability of water-in-oil-in-water multiple emulsions to encapsulate resveratrol was assessed. Multiple emulsions were prepared by emulsifying a primary emulsion (40 wt.%) in water containing 0.5 wt.% sodium caseinate and 0.1 M NaCl. Four primary emulsions of canola oil (20 wt.%) stabilized by 8 wt.% polyglycerol polyricinoleate were chosen. The dispersed phase of the primary emulsions contained 0.1 M NaCl and either water, 20 wt.% ethanol in water, 2.5 wt.% whey protein isolate (WPI) in water, or 2.5 wt.% WPI and 5 wt.% gelatine in water. Resveratrol was incorporated into these primary emulsions at 0.25 wt.% to give a final 0.02 wt.% resveratrol in the multiple emulsions. Slight increase in particle size with storage at 23 °C for up to 2 weeks was observed. Further, less than 10% of the total encapsulated resveratrol is released to the external, continuous, aqueous phase. This work demonstrates the potential of multiple emulsions to encapsulate resveratrol for food applications.     

Preformulation Studies on Piperlongumine

Piperlongumine is a natural alkaloid extracted from piper plants which has been used traditionally for the treatment of certain diseases. This compound shows interesting in vitro pharmacological activity such as selective anticancer activity and higher cytotoxicity than methotrexate, cyclophosphamide and adriamycin on breast, colon, and osteosarcoma cancers, respectively. However, the physicochemical properties for this compound have not been well characterized. In this research, preformulation studies for piperlongumine have been performed to determine factors which influence solubility and stability which, in turn, can be used to assist future formulation development. The solubility of piperlongumine in water was found to be approximately 26 μg/ml. Using 10% polysorbate 80 as a surfactant resulted in a 27 fold increase in solubility. Cosolvents and cyclodextrins afforded concentrations of 1 mg/ml and higher. The pH degradation rate profile for piperlongumine at various temperatures shows significant instability of the drug at pH values ≥ 7 and 3, and maximum stability around pH 4. It was estimated that it would take approximately 17 weeks for piperlongumine to degrade by 10% at 25°C, pH 4. Additionally, piperlongumine showed marked photo-degradation upon exposure to an ultraviolet light source, especially in aqueous media.     

The effect of saffron, Crocus sativus stigma, extract and its constituents, safranal and crocin on sexual behaviors in normal male rats

In this study, the aphrodisiac activities of Crocus sativus stigma aqueous extract and its constituents, safranal and crocin, were evaluated in male rats. The aqueous extract (80, 160 and 320 mg/kg body wt.), crocin (100, 200 and 400 mg/kg body wt.), safranal (0.1, 0.2 and 0.4 ml/kg), sildenafil (60 mg/kg body wt., as a positive control) and saline were administered intraperitoneally to male rats. Mounting frequency (MF), intromission frequency (IF), erection frequency (EF), mount latency (ML), intromission latency (IL) and ejaculation latency (EL) were the factors evaluated during the sexual behavior study. Crocin, at all doses, and the extract, especially at doses 160 and 320 mg/kg body wt., increased MF, IF and EF behaviors and reduced EL, IL and ML parameters. Safranal did not show aphrodisiac effects. The present study reveals an aphrodisiac activity of saffron aqueous extract and its constituent crocin.     

Study of isopropyl myristate microemulsion systems containing cyclodextrins to improve the solubility of 2 model hydrophobic drugs

The objectives of this project were to evaluate the effect of alkanols and cyclodextrins on the phase behavior of an isopropyl myristate microemulsion system and to examine the solubility of model drugs. Triangular phase diagrams were developed for the microemulsion systems using the water titration method, and the solubility values of progesterone and indomethacin were determined using a conventional shake-flask method. The water assimilation capacities were determined to evaluate the effective microemulsion formation in different systems. The alkanols showed higher microemulsion formation rates at higher concentrations. A correlation between the carbon numbers of the alkanol and water assimilation capacity in the microemulsions studied was observed; isobutanol and isopentanol produced the best results. The addition of cyclodextrins showed no effect or had a negative effect on the microemulsion formation based on the type of cyclodextrin used. Isopropyl myristate-based microemulsion systems alone could increase the solubility values of progesterone and indomethacin up to 3300-fold and 500-fold, respectively, compared to those in water. However, the addition of cyclodextrins to the microemulsion systems did not show a synergistic effect in increasing the solubility values of the model drugs. In conclusion, microemulsion systems improve the solubility of progesterone and indomethacin. But the two types of cyclodextrins studied affected isopropyl myristatebased microemulsion systems negatively and did not improve the solubilization of 2 model drugs.     

Effect of Polysorbate 80 Quality on Photostability of a Monoclonal Antibody

Polysorbate 80 is one of the key components of protein formulations. It primarily inhibits interfacial damage of the protein molecule due to mechanical stress during shipping and handling. However, polysorbate 80 also affects the formulation photostability. Exposure to light of polysorbate 80 aqueous solution results in peroxide generation, which in turn may result in oxidation of the susceptible amino acid residues in the protein molecule. The purpose of this study was to determine if the photostability of our proprietary IgG(1) monoclonal antibody formulation containing polysorbate 80 is affected by the quality (grade/vendor) of polysorbate 80. Following four types of polysorbate 80 were tested: (1) Polysorbate 80 Super-Refined, Mallinckrodt Baker, (2) Polysorbate 80 NF, Mallinckrodt Baker, (3) Polysorbate 80 NF, EMD Chemicals, and (4) Ultra-pure Polysorbate 80 (HX), NOF Corporation. The samples were exposed to light as per ICH guidelines Q1B. The results of the study show that photostability of the antibody formulation is indeed affected by the quality of polysorbate 80. This study underscores the importance of carefully choosing the quality of polysorbate 80 to ensure the robustness of formulation.     

Supramolecular interactions between β‐lapachone with cyclodextrins studied using isothermal titration calorimetry and molecular modeling

Supramolecular interactions between β‐lapachone (β‐lap) and cyclodextrins (CDs) were investigated by isothermal titration calorimetry. The most favorable host: guest interaction was characterized using X‐ray powder diffraction (XRD), differential scanning calorimetry and thermogravimetry (DSC/TG), spectroscopy (FT‐IR), spectroscopy (2D ROESY) nuclear magnetic resonance (NMR), and molecular modeling. Phase solubility diagrams showed β‐, HP‐β‐, SBE‐β‐, γ‐, and HP‐γ‐CDs at 1.5% (w/w) allowed an increase in apparent solubility of β‐lap with enhancement factors of 12.0, 10.1, 11.8, 2.4, and 2.2, respectively. β‐lap has a weak interaction with γ‐ and HP‐γ‐CDs and tends to interact more favorably with β‐CD and its derivatives, especially SBE‐β‐CD (K = 4160 M⁻¹; ΔG = −20.66 kJ·mol⁻¹). Thermodynamic analysis suggests a hydrophobic interaction associated with the displacement of water from the cavity of the CD by the β‐lap. In addition, van der Waals forces and hydrogen bonds were responsible for the formation of complexes. Taken together, the results showed intermolecular interactions between β‐lap and SBE‐β‐CD, thereby confirming the formation of the inclusion complex. Molecular docking results showed 2 main orientations in which the interaction of benzene moiety at the wider rim of the SBE‐β‐CD is the most stable (average docking energy of −7.0 kcal/mol). In conclusion, β‐lap:SBE‐β‐CD is proposed as an approach for use in drug delivery systems in cancer research.     

Radioprotective effect of polyethylene glycol

Polyethylene glycol of molecular weight 400 (PEG-400) had a radioprotective effect of about 20% against lethality when given ip 20 min prior to single or fractionated X-ray doses to the head and neck. Dose modification factors (DMF) based on LD50/15 values ranged from 1.14 to 1.24. A similar DMF of 1.12 based on LD50/30 values was obtained using single doses of whole-body X irradiation. Mice given head and neck irradiation had significantly reduced rectal temperatures (31.3 +/- 3.0 degrees C) 9 days post irradiation compared with unirradiated controls (35.4 +/- 0.6 degrees C). No such reduction was observed when PEG-400 was given with radiation (36.3 +/- 0.9 degrees C). PEG-400 also lessened, but not significantly, the frequency of shivering in irradiated animals. Histopathologic examination of the oral structures demonstrated only marginal protection by PEG-400. Estimation of the alpha/beta ratio from LD50 data on head and neck-irradiated mice yielded values of 4.4 +/- 1.9 (95% confidence limits) Gy without PEG-400 and 7.9 +/- 1.4 Gy with PEG-400. Since it is a non-thiol radioprotector, PEG-400 may be more useful when combined with more conventional thiol-containing radioprotectors.     

Microemulsions Containing Medium-Chain Glycerides as Transdermal Delivery Systems for Hydrophilic and Hydrophobic Drugs

We evaluated the ability of microemulsions containing medium-chain glycerides as penetration enhancers to increase the transdermal delivery of lipophilic (progesterone) and hydrophilic (adenosine) model drugs as well as the effects of an increase in surfactant blend concentration on drug transdermal delivery. Microemulsions composed of polysorbate 80, medium-chain glycerides, and propylene glycol (1:1:1, w/w/w) as surfactant blend, myvacet oil as the oily phase, and water were developed. Two microemulsions containing different concentrations of surfactant blend but similar water/oil ratios were chosen; ME-lo contained a smaller concentration of surfactant than ME-hi (47:20:33 and 63:14:23 surfactant/oil/water, w/w/w). Although in vitro progesterone and adenosine release from ME-lo and ME-hi was similar, their transdermal delivery was differently affected. ME-lo significantly increased the flux of progesterone and adenosine delivered across porcine ear skin (4-fold or higher, p < 0.05) compared to progesterone solution in oil (0.05 ± 0.01 μg/cm²/h) or adenosine in water (no drug was detected in the receptor phase). The transdermal flux of adenosine, but not of progesterone, was further increased (2-fold) by ME-hi, suggesting that increases in surfactant concentration represent an interesting strategy to enhance transdermal delivery of hydrophilic, but not of lipophilic, compounds. The relative safety of the microemulsions was assessed in cultured fibroblasts. The cytotoxicity of ME-lo and ME-hi was significantly smaller than sodium lauryl sulfate (considered moderate-to-severe irritant) at same concentrations (up to 50 μg/mL), but similar to propylene glycol (regarded as safe), suggesting the safety of these formulations.     

Carbon dots synthesized by the m‐trihydroxybenzene as the carbon source and its application on the detection of pH value

New carbon dots (CDs) were prepared by a microwave method using m‐trihydroxybenzene and dilute sulphuric acid as raw materials. The as‐prepared CDs exhibited excellent water solubility and photoluminesence properties. The optimum excitation and emission wavelengths of the new CDs were at 365 nm and 465 nm, respectively. The fluorescence of the new CDs experienced remarkable changes in the presence of Britton–Robinson (BR) buffer solution with different pH values under 4°C after reacting for 70 min. In addition, a linear relationship between the logarithm of the relative fluorescence intensity ratio [lg(I_F/I_Fo)] of CDs and the pH values of the sensing system ranging 1.81–5.72 was obtained, with a correlation coefficient of 0.9933. Thus, a sensitive and simple method to detect the pH value of solution was developed. Furthermore, the analytical application of detecting the concentration of acetic acid in vinegar was investigated. The detection values were found similar to the reference values, fully demonstrating a good linear relationship between the logarithm of the relative fluorescence intensity ratio of the CDs and the pH value of the system. Hence, the method could be used to detect the concentration of acetic acid in vinegar.     

Extraction of horseradish peroxidase and its conjugates formed by surface-active agent micelles

The author studied peculiarities of the extraction of horseradish peroxidase (HRP) and its conjugates with 3 and 7 molecules of progesterone (PROG) from the aqueous solution into heptane and chloroform containing reversed micelles of surfactants. Micelles of cetyltrimethylammonium bromide, Aerosol OT, and Triton X-45 protect the enzyme from denaturation in the biphasic system. The enzyme is readily extracted from the aqueous phase in the organic medium containing reversed micelles of surfactants at low values of pH. The addition of PEG-6000 (5%) to the aqueous phase enhances the enzyme solubilization at pH 8.6-9.0. The enzyme solubilization significantly increases, when surfactants with unlike charges are used. Inorganic salts decrease the specific solubilization of the enzyme. The HRP modification with progesterone has a weak effect on the enzyme solubilization with reversed micelles.     

Amount of leachant and water absorption levels of wood treated with borates and water repellents

Wood protection efficacy of borates against biological agents, flame retardancy, and suitability to the environment is well known. Since borates can be applied to timber as water based solutions, they are preferred economically as well. Even though they are highly mobile in wood, boron compounds are widely used in timber preservation. Borates migrate in liquid and increase the hygroscopicity of wood in damp conditions. This study deals with the physical restriction of water access in wood by impregnating water repellent agents into wood to limit amount of leachant and water absorption levels of wood after boron treatment. Borates were incorporated with polyethylene glycol-400 (PEG-400) their bulking effect in wood was considered. Results indicated that the amount of leachates from wood treated with borates in PEG-400 was remarkably higher compared to those of wood treated with the aqueous solutions of borates. Water absorption (WA) levels of wood treated with aqueous solutions of borates were higher than those of their treated samples with the solutions in PEG-400. Secondary treatments of wood with the water repellent (WR) chemicals following borate impregnation reduced the leaching of chemicals from wood in water and also WA of the specimens were less than those of the wood treated with only borates from aqueous and PEG solutions. Styrene (St) was the most effective monomer among the other agents used in terms of immobility effect on borates and WA.     

Diversity in the supramolecular interactions of 5,6-dichloro-2-(trifluoromethyl)-1H-benzimidazole with modified cyclodextrins: Implications for physicochemical properties and antiparasitic activity

The molecular interactions of 5,6-dichloro-2-(trifluoromethyl)-1H-benzimidazole (G2), an antiprotozoa with poor aqueous solubility, with 2-hydroxypropyl-α-cyclodextrin (HPαCD), methyl-β-cyclodextrin (MβCD) and 2-hydroxypropyl-β-cyclodextrin (HPβCD) were examined. The aqueous solubility enhancement by cyclodextrins (CDs) was evidenced in phase-solubility diagrams, and the stoichiometry of G2/CD systems was determined by Job's plots. Two-dimensional NMR spectroscopic data revealed that a different mode of interaction took place between G2 and CDs in solution. With HPαCD, a non-inclusion complex was generated. In the case of MβCD, a typical host-guest system was obtained and with HPβCD a partial inclusion complex through the narrow side of the macrocycle was formed. ESI-mass spectrometric data confirmed the stoichiometry and mode of interaction of these systems in solution. Solid-state characterization (scanning calorimetry and powder X-ray diffraction) supported the inclusion complex formation. The leishmanicidal activity, trypanocidal activity and non-toxic profile of G2/MβCD showed the advantages of using this inclusion complex to promote the biological assays extension of G2.     

Enhancement of iodinin solubility by encapsulation into cyclodextrin nanoparticles

Phenazine is known to regroup planar nitrogen-containing heterocyclic compounds. It was used here to enhance the bioavailability of the biologically important compound iodinin, which is near insoluble in aqueous solutions. Its water solubility has led to the development of new formulations using diverse amphiphilic α-cyclodextrins (CDs). With the per-[6-desoxy-6-(3-perfluorohexylpropanethio)-2,3-di-O-methyl]-α-CD, we succeeded to get iodinin-loaded nanoformulations with good parameters such as a size of 97.9?nm, 62% encapsulation efficiency and efficient control release. The study presents an interesting alternative to optimizing the water solubility of iodinin by chemical modifications of iodinin.     

Exploring flubendazole formulations for use in sheep. Pharmacokinetic evaluation of a cyclodextrin-based solution

ABSTRACT: BACKGROUND: Flubendazole (FLBZ) is a poor water solubility broad-spectrum BZD methylcarbamate. Anthelmintic compounds cyclodextrins (CDs) are usually used to increase aqueous solubility of poor hydrosoluble compounds. The comparative in vitro aqueous solubility of FLBZ and other BZD anthelmintics in the presence of hydroxypropyl-betacyclodextrin (HPbetaCD) was evaluated in the current work. Additionally, the comparative pharmacokinetic behaviour of FLBZ (and its metabolites) administered by the intraruminal (i.r.) or intraabomasal (i.a.) routes to sheep as either an aqueous CDs-based solution or a conventional carboximethylcellulose (CMC) suspension was assessed. Drug solubility studies involving albendazole, mebendazole, oxfendazole and FLBZ were performed in an aqueous solution (pH 1.2 or 7.4) with or without HPbetaCD (10 %, w/v). The pharmacokinetic study involved two experiments. Experiment 1: In a crossover study, sheep received either a FLBZ-CDs solution (n = 3) or a FLBZ-CMC suspension (n = 3) by the i.r. route (3.8 mg/kg). The treatment Groups were reversed after a 21-days washout period. Experiment 2: sheep (n = 4) were treated by the i.a. route with the FLBZ-CDs solution (3.8 mg/kg). Plasma and abomasal fluid samples were collected between 0 and 72 h posttreatment. Samples were analysed by HPLC. RESULTS: Improvement of FLBZ aqueous solubility due to CDs resulted markedly higher than that observed for mebendazole and albendazole. However, oppositely to what was expected, the absorption-related pharmacokinetic parameters did not show any marked formulation-dependant effect. After the i.a. administration of FLBZ, the AUC and the Tmax of the parent compound were significantly (P < 0.05) reduced, which is consistent with ruminal bypass. CONCLUSION: The administration of FLBZ as a CDs-based solution, does not seem to achieve great practical relevance for parasite control in sheep.     

Control of Transdermal Permeation of Hydrocortisone Acetate from Hydrophilic and Lipophilic Formulations

The purpose of this research was the preparation of four formulations containing hydrocortisone acetate (HCA) for topical application, including two aqueous systems (hydrophilic microemulsion and aqueous gel) and two systems with dominant hydrophobicity (hydrophobic microemulsion and ointment). The formulations were tested for the release and permeation of HCA across an animal membrane. The release of HCA was found comparable for the four systems. The two microemulsions promote permeation across an ex-vivo membrane, examined by means of a Franz cell. Hydrophobic microemulsion guarantees the highest solubility (2,370 μg/ml) and flux (133 μg/cm².h) of the drug, since it contains almost 40% Transcutol, a permeation enhancer. Gel and ointment provide lower solubility and flux, being the values, related to the ointment, the lowest ones (562 μg/ml and 0.4 μg/cm².h). Experimental results allow the conclusion that gel and ointment can be suitable when it is desirable to minimize absorption of topically applied HCA as to keep the drug restricted to the diseased area and prevent side effects of the systemic presence of HCA.     

Effect of PEG and other additives on cyclodextrin production by Bacillus macerans cyclomaltodextrin-glycosyl-transferase

Summary The effect of PEG and other polyols additives on cyclodextrins (CDs) production by Bacillus macerons cyclomaltodextrin-glycosyl-transferase (CGTase) was investigated. Mannitol, glycerol and PEG-200 (20%,v/v) enhanced the enzymatic production yield regardless of substrate concentration. Furthermore, the PEG-200 addition increased the thermostability of the CGTase.     

Enzyme modification of starch granules: formation and retention of cyclomaltodextrins inside starch granules by reaction of cyclomaltodextrin glucanosyltransferase with solid granules

Cyclomaltodextrin glucanosyltransferase (CGTase) was adsorbed into starch granules and allowed to react at 37 degrees C. The reaction was conducted with the granules removed from an aqueous environment, but containing 50% w/w water inside the granule. Reaction for 20 h gave a maximum of 1.4%, w/w of cyclodextrins (CDs) inside the granule. Waxy maize and maize starches gave the highest amounts of CDs (1.3 and 1.4%, respectively), with tapioca and amylomaize-7 starches giving about 50% less (0.9 and 0.6%, respectively). Reaction of a combination of CGTase and isoamylase with solid starch granules gave a 2.6-fold increase in the formation of CDs, with a maximum yield of 3.4 and 100% retention inside waxy maize starch granules.