Diiron and diruthenium aminocarbyne complexes containing pseudohalides: stereochemistry and reactivity

Acetonitrile is easily displaced from [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (R = 2,6-Me₂C₆H₃ (Xyl) (1a); Me (1b)) upon stirring in THF at room temperature in the presence of [NBu₄][SCN]. The resulting complexes trans-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (trans-2a); Me (trans-2b)) are completely isomerised to cis-[Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCS)(Cp)₂] (R = Xyl (cis-2a); Me (cis-2b)) when heated at reflux temperature. Similarly, the complexes cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCO)(Cp)₂] (M = Fe, R = Me (4a); M = Ru, R = Xyl (4b); M = Ru, R = Me (4c)) and cis-[M₂{μ-CN(Me)(R)}(μ-CO)(CO)(N₃)(Cp)₂] (M = Fe, R = Xyl (5a); M = Fe, R = Me (5b); M = Ru, R = Xyl (5c)) can be obtained by heating at reflux temperature a THF solution of [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] (M = Fe, R = Xyl (1a); M = Fe, Me (1b); M = Ru, R = Xyl (1c); M = Ru, R = Me (1d)) in the presence of NaNCO and NaN₃, respectively. The reactions of 5 with MeO₂CCCCO₂Me, HCCCO₂Me and (NC)(H)CC(H)(CN) afford the triazolato complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃C₂(CO₂Me)₂}(Cp)₂] (M = Fe, R = Xyl (6a); M = Fe, R = Me (6b); M = Ru, R = Xyl (6c)), [M₂{μ-CN(Me)(R)}(μ- CO)(CO){N₃C₂(H)(CO₂Me)}(Cp)₂] (M = Fe, R = Me (7a); M = Ru, R = Xyl (7b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃C₂(H)(CN)}(Cp)₂] (8), respectively. The asymmetrically substituted triazolato complexes 7-8 are obtained as mixtures of N(1) and N(2) bonded isomers, whereas 6 exists only in the N(2) form. Methylation of 6-8 results in the formation of the triazole complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(CO₂Me)₂}(Cp)₂][CF₃SO₃] (9), [M₂{μ-CN(Me)(R)}(μ-CO)(CO){N₃(Me)C₂(H)(CO₂Me)}(Cp)₂][CF₃SO₃] (M = Fe, R = Me (10a); M = Ru, R = Xyl (10b)) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){N₃(Me)C₂(H)(CN)}(Cp)₂][CF₃SO₃], 11. The crystal structures of trans-2b, 4b · CH₂Cl₂, 5a, 6b · 0.5CH₂Cl₂ and 8 · CH₂Cl₂ have been determined.     

Calix[4]arene supported group 5 imido complexes

The reaction of imidoyl chlorides [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and calix[4]arene methyl ether H₃Mecalix unexpectedly leads to the formation of the structurally characterized vanadium (IV) complex [VCl(Mecalix)] (4). Calix[4]arene methyl ether stabilized imido complexes of the type [V(NR)(Mecalix)] (R = Ph 7, Tol 8, tBu 9) were afforded from the reaction of [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and the tris(lithium) or tris(sodium) salt of the calix[4]arene ether. The lithium salt [{Li₃(Mecalix)}₂] (5) is a dimer in the solid state, in which two monomeric trianions are bridged by lithium cations. Imido complexes [M(NR)(Mecalix)] (M = Nb: R = tBu, 12, R = Tol 13, R = Mes 14, R = Dipp 15; M = Ta: R = tBu 16, R = Tol 17) (Tol = 4-C₆H₄Me, Mes = 2,6-C₆H₃Me₂; Dipp = 2,6-C₆H₃iPr₂) have been prepared from structurally characterized [NbCl₂(Mecalix)] (10) and previously known [TaCl₂(Mecalix)] (11) via reaction with two equivalents of the appropriately metallated (Li, K) primary amine. The molecular structures of 13 and 15 confirm the mononuclear nature of these complexes.     

Hybrid scorpionate/cyclopentadienyl titanium and zirconium complexes with alkoxide and imido ligands

The reactivity of hybrid scorpionate/cyclopentadienyl ligand-containing trichloride zirconium complexes [ZrCl₃(bpzcp)] (1) [bpzcp = 2,2-bis(3,5-dimethylpyrazol-1-yl)-1,1-diphenylethylcyclopentadienyl] and [ZrCl₃(bpztcp)] (2) [bpztcp = 2,2-bis(3,5-dimethylpyrazol-1-yl)-1-tert-butylethylcyclopentadienyl] toward several lithium alkoxides has been carried out. Thus, alkoxide-containing complexes [ZrCl₂(OR)(bpzcp)] (R = Me, 3; Et, 4; ⁱPr, 5; (R)-2-Bu, 6), [ZrCl₂(OR)(bpztcp)] (R = Me, 7; Et, 8; ⁱPr, 9; (R)-2-Bu, 10) and [Zr(OR)₃(bpztcp)] (R = Et, 11; ⁱPr, 12) were prepared by deprotonation of the appropriate alcohol group with BuⁿLi followed by reaction with 1 or 2. In addition, the imido-complex [Ti(N^tBu)Cl(bpztcp)(py)] (13) were also prepared. The structures of these complexes have been proposed on basis of spectroscopic and DFT methods.     

Syntheses and characterization of titanium malonato and amino acid complexes: [Ti(cp)2(OOCCH2NMe2)] - The first structurally characterized α-amino acid titanium(III) complex

The reaction of [Ti(cp^∗)₂(BTMSA)] (1) (cp^∗ = η⁵-C₅Me₅, BTMSA = bis(trimethylsilyl)acetylene) with malonic acids ((HOOC)₂CR₂, R = H, Me) and N,N-dimethylglycine resulted in the formation of titanium(IV) dicarboxylato complexes [Ti(cp^∗)₂{(OOC)₂CR₂}] (R = H, 2; R = Me, 3) and an α-amino acid titanium(III) complex [Ti(cp^∗)₂(OOCCH₂NMe₂)] (4). The identities of complexes 2-4 were confirmed by microanalysis, ¹H and ¹³C NMR spectroscopy (2, 3), ESI-MS and CID experiments (2, 3) as well as by ESR and magnetic measurements (μ_eff = 1.81, 298 K) for 4. Single X-ray diffraction analyses of 2 and 4 exhibited monomolecular complexes in which the titanium atom is distorted tetrahedrally coordinated by two η⁵-C₅Me₅ rings and by the chelating bound malonato-κ²O,O′ (2) and N,N-dimethylglycinato-κ²O,O′ ligand (4).     

Syntheses of di-hydrocarbyl derivatives of carbonyl phosphine complexes of iron

Complexes cis,trans-Fe(CO)₂(PMe₃)₂RR′ (R = CH₃, R′ = Ph (2); R = CH₃, R′ = CHCH₂ (3); R = CHCH₂, R′ = Ph (4); R = R′ = CHCH₂ (5); R = R′ = CH₃ (6)) were prepared by reaction of cis,trans-Fe(CO)₂(PMe₃)₂RCl (1) with organolithium reagents LiR′. All complexes were characterized in solution by IR and ¹H, ³¹P and, in a few cases, ¹³C NMR mono- and bi-dimensional spectroscopies. Complexes 5 and 6 were structurally characterized by X-ray diffractometric methods. In solution complexes 2, 3 and 4 undergo slowly coupling of the σ-hydrocarbyl substituents leading to Fe(CO)₃(PMe₃)₂ and other decomposition products. Complex 6 was very stable in solution in the absence of nucleophiles and in the solid state. Complex 5 transformed through intramolecular coupling of the vinyl groups into Fe(CO)(PMe₃)₂(η⁴-butadiene) (7), which was characterized in solution by IR and NMR spectroscopies.     

Preparation and characterization of macrocyclic dinickel complexes coligated by monoalkyl- and dialkylcarbamates

The dinuclear nickel(II) complex [Ni₂L(Cl)]⁺ (1), where (L)²⁻ represents a 24-membered binucleating hexamine-dithiophenolate ligand, reacts readily with primary and secondary amines RR′NH in the presence of CO₂ (1 bar) to give dinuclear monoalkyl- and dialkylcarbamate complexes [Ni₂L(O₂CNRR′)]⁺ (R = H, R′ = CH₂Ph (2), R = H, R′ = n-Bu (3), R = H, R′ = n-Oct (4), R = H, R′ = CH₂CH₂OH (5), R = R′ = Et (6), and R = R′ = CH₂CH₂OH (7)). Complexes 2-7 can also be prepared by the reaction of 1 with CO₂(air)/amine. The carbamate complexes are hydrolyzed in methanolic solution to give the known alkylcarbonate complex [Ni₂L(O₂COMe)]⁺ (8). These conversions are less rapid than the transesterification reactions of 8, due to a less electron-demanding carboxyl C(carbamate) atom. All new complexes were either isolated as perchlorate or tetraphenylborate salts and fully characterized by elemental analysis, UV/Vis, and IR spectroscopy. The structures of 2[BPh₄] and 7[BPh₄] have also been determined by X-ray crystallography. They confirm the presence of μ_1,3-bridging alkylcarbamate units in the products.     

Synthesis and characterization of CpMCl(PR3)(S or W-η-butadienesulfonyl) compounds of rhodium and iridium

A metathesis reaction of [Cp^∗MCl₂(PR₃)] [M = Rh, R = Ph (1), Me (3); M = Ir, R = Ph (2), Me (4)] takes place in the presence of potassium butadienesulfinate (SO₂CHCHCHCH₂)K (9) to afford the mononuclear compounds [Cp^∗M(Cl)(PR₃)(η¹-SO₂CHCHCHCH₂)] [M = Rh, R = Ph (11S), (11W); M = Rh, R = Me (13S), (13W)] and [M = Ir, R = Ph (12S); M = Ir, R = Me (14S), (14W)] under different reaction conditions. The addition of PR₃ (R = Ph, Me) to Cp^∗Ir(Cl)[(1,2,5-η)-SO₂CHCHCHCH₂] (7) affords the corresponding iridium isomers 12S, 12W and 14S, in a non-selective reaction, along with the corresponding dichloride compounds 2 or 4. The ¹H and ¹³C{¹H} NMR data are consistent with the butadienesulfonyl ligands coordinated exclusively through the sulfur atom, and they show the presence of two isomers, described as the S and W conformers, which can be isolated separately. There is clear evidence that these isomers correspond to the kinetic and thermodynamic derivatives, respectively.     

Triorganotin(IV) complexes of Schiff base derived from 6-amino-2-mercaptobenzothiazole: Synthesis, characterization and X-ray crystal structures

Nine triorganotin(IV) complexes of the type R₃SnL (L = L1 R = Me 1, Ph 2, PhCH₂3; L = L2 R = Me 4, Ph 5, PhCH₂6; L = L2 R = Me 7, Ph 8, PhCH₂9) have been obtained by reaction of new Schiff base HL1, HL2 or HL3 with triorganotin(IV) chloride in the presence of sodium ethoxide. All the complexes 1-9 were characterized by elemental, IR and NMR spectra analyses. Except for complexes 3, 4, 6, 9, the others were also characterized by X-ray crystallography diffraction analyses, which revealed that complexes 1, 2, 5, 7, 8 were four coordinated and displayed a capped tetrahedron.     

Synthesis, characterizations, and crystal structures of triorganotin(IV) derivatives with areneseleninic acids

Six new triorganotin(IV) complexes, [R₃Sn(O₂SeC₆H₄Cl)]_n (R = Me 1; Ph 2), [R₃Sn(O₂SeC₆H₄Me)]_n (R = Me 3; Ph 4), [R₃Sn(O₂SeC₆H₄Bu)]_n (R = Me 5; Ph 6) have been synthesized by the reaction of 4-chlorobenzeneseleninic acid, p-Tolueneseleninic acid, and 4-tert-butylbenzeneseleninic acid with triorganotin(IV) chloride in the presence of sodium ethoxide. All of the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, and ¹¹⁹Sn) spectroscopy, and X-ray crystallography. Crystal structures show that all of the complexes exhibit 1D infinite chain structures which are generated by the bidentate oxygen atoms and the five-coordinated tin centers.     

Synthesis and structural characterization of new chiral mixed phosphine phosphoramidite complexes of ruthenium

New phosphoramidite complexes of ruthenium chiral at the metal were synthesized, structurally characterized and their electrochemical and catalytic properties were studied. Reaction of the known chiral phosphoramidites (R = naphthyl, R′ = CH₃, 1a; R = naphthyl, R′ = benzyl, 1b; R = octahydronaphthyl, R′ = benzyl, 1c) with CpRu(PPh₃)₂Cl afforded the title compounds CpRu(PPh₃)(1a-c)(Cl) (2a-c) in 46-74% isolated yields. Fractional crystallization of 2b and 2c afforded the corresponding diastereopure complexes which are chiral both at the metal and at the ligand. The molecular structures of 2b and 2c were determined, revealing a pseudo octahedral coordination geometry about the ruthenium center. Electrochemical studies by cyclic voltammetry showed reversible electrochemical behavior of the metal complexes 2a-c. The new metal complexes are catalytically active in the Mukaiyama aldol reaction (24 h, room temperature, 31-53% yield), but almost no enantiomeric excesses for the products were obtained.     

Difference in bonding behaviour of azide and thiocyanate to Hg(II)-azoimidazoles

Mercury(II) acetate reacts with the 1-alkyl-2-(arylazo)imidazoles [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and sodium azide in methanol solution to afford azido bridged polymeric complexes [Hg(RaaiR′)(N₃)₂]_n (3/4). On setting up similar reaction condition, the reaction of Hg(OAc)₂ with RaaiR′ and NH₄SCN has yielded, instead of polymer, an ion-pair [Hg(RaaiR′)₄][Hg(SCN)₄] (5/6). The complexes are characterised by elemental analysis, IR, UV-Vis, ¹H NMR spectral data and single-crystal X-ray structures of [Hg(HaaiEt)(μ-1,1-N₃)₂]_n (4a) and [Hg(HaaiEt)₄][Hg(SCN)₄] (6a). The complex 4a is a coordination polymer with end-on (μ-1,1) azido bridge and 6a has tetrahedral structure.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

Lewis-base copper(I) formates: Synthesis, reaction chemistry, structural characterization and their use as spin-coating precursors for copper deposition

Consecutive synthesis methodologies for the preparation of a series of copper(I) formates [L_mCuO₂CH] (L = ⁿBu₃P: 4a, m = 1; 4b, m = 2; 5, L = [Ti](CCSiMe₃)₂, m = 1, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and [L_mCuO₂CH·HO₂CR] (L = ⁿBu₃P: 7a, m = 1, R = H; 7b, m = 2, R = H; 7c, m = 2, R = Me; 7d, m = 2, R = CF₃; 7e, m = 2, R = Ph. L = (^cC₆H₁₁)₃P, R = H: 8a, m = 2; 8b, m = 3. L = (CF₃CH₂O)₃P, R = H: 9a, m = 2; 9b, m = 3. L = (CH₃CH₂O)₃P, R = H: 10a, m = 2; 10b, m = 3. L = [Ti](CCSiMe₃)₂; m = 1: 11a, R = H; 11b, R = Ph) is reported using [CuO₂CH] (1) and L (2a, L = ⁿBu₃P; 2b, L (^cC₆H₁₁)₃P; 2c, L = (CF₃CH₂O)₃P; 2d, L = (CH₃CH₂O)₃P; 3, L = [Ti](CCSiMe₃)₂) as key starting materials. Addition of formic acid (6a) or carboxylic acid HO₂CR (6b, R = Me; 6c, R = CF₃; 6d, R = Ph) to the afore itemized copper(I) formates 4 and 5 gave metal-organic or organometallic 7-11. The molecular structures of 8a and 11a in the solid state are reported showing a threefold coordinated copper(I) ion, setup by either two coordinatively-bonded phosphorus atoms and one formate oxygen atom (8a) or two π-bonded alkyne ligands and one oxygen atom (11a). A formic acid molecule is additionally hydrogen-bonded to the CuO₂CH moiety. The use of 7b as suitable precursor for the deposition of copper onto TiN-coated oxidized silicon wafers by the spin-coating process below 300 °C is described. Complex 7b offers an appropriate transformation behavior into metal phase by an elimination-decarboxylation mechanism. The morphology of the copper films strongly depends on the annealing conditions. A closed grain network densified by a post-treatment is obtained (8 °C min⁻¹, N₂/H₂ carrier gas). Hydrogen post-anneal to 420 °C after film deposition gave a copper film showing resistivities from 2.5 to 3.7 μΩ cm. This precursor was also used for gap-filling processes.     

Addition of protic nucleophiles to alkynyl methoxy carbene ligands in diiron complexes

Different protic nucleophiles (i.e.Ph₂CNH, PhSH, MeCO₂H, PhOH) can be added to the CC bond of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CCTol}(Cp)₂][SO₃CF₃] (1), affording new diiron alkenyl methoxy carbene complexes.The additions of Ph₂CNH and MeCO₂H are regio and stereoselective, resulting in the formation of the 5-aza-1-metalla-1,3,5-hexatriene [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(NCPh₂)}(Cp)₂][SO₃CF₃] (2), and the 2-(acyloxy)alkenyl methoxy carbene complex [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)OC(O)Me)}(Cp)₂][CF₃SO₃] (5); the E isomer of the former and the Z of the latter are formed exclusively.Conversely, the addition of PhSH is regio but not stereoselective; thus, both the E and Z isomers of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(SPh)}(Cp)₂][SO₃CF₃] (3) are formed in comparable amounts.Compounds 3 and 5 are demethylated upon chromatography through Al₂O₃, resulting in the formation of the acyl complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)(SPh)}(Cp)₂] (4) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)OC(O)Me}(Cp)₂] (6), respectively, both with a Z configured C_βC_γ bond.Finally, the reaction of 1 with PhOH proceeds only in the presence of an excess of Et₃N affording the 2-(alkoxy)alkenyl acyl complex [Fe₂{μ-CN(Me)(Xyl)}(μ- CO)(CO){C_α(O)C_βHC_γ(Tol)(OPh)}(Cp)₂] (7). The crystal structures of 4 · CH₂Cl₂ and 7 · 0.5CH₂Cl₂ have been determined by X-ray diffraction experiments.     

Thiol end-capped titanium-copper complexes: Synthesis, solid state structure and electrochemical behavior

The synthesis of acetylene, acyl-thiol and thiol end-capped titanium-copper π-tweezer complexes of the structural type {[Ti](μ-σ,π-CCR)₂}CuSC₆H₄-4-R′ ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; 3: R = SiMe₃, R′ = CCH; 5a: R = SiMe₃, R′ = SC(O)Me; 5b: R = ^tBu, R′ = SC(O)Me), {[Ti](μ-σ,π-CCSiMe₃)₂}CuSC₆H₄-C₆H₄-4-SH (7) and ({[Ti](μ-σ,π-CCR)₂}CuSC₆H₄)₂ (8) is described. Homobimetallic 3, 5a and 5b are accessible via the reaction of {[Ti](μ-σ,π-CCR)₂}CuMe (1a: R = SiMe₃, 1b: R = ^tBu) with stoichiometric amounts of Me(O)CS-1-C₆H₄-4-CCH (2) and C₆H₄-1,4-(SC(O)Me)₂ (4), respectively. Within these reactions the copper-sulfur bond formation is accompanied by the elimination of acetone. If 1a is treated with the dithiol (HS-C₆H₄)₂ (6) in a ratio of 1:1 or 2:1 than dinuclear 7 and tetranuclear 8 are produced upon formation of methane. Both types of reaction allow in a straightforward manner the synthesis of analytically pure samples in high yield. In addition, complex 8 is also formed, when equimolar amounts of 7 are reacted with1a.The solid state structure of 5a is reported. This complex possesses a low-valent CuSC₆H₄-4-SC(O)Me entity with copper(I) in a planar surrounding. All other geometrical features are in agreement with the expected data relevant for Ti-Cu organometallic π-tweezer complexes.Cyclic voltammetric studies were carried out with 3-8. The results are discussed with respect to intramolecular interactions between the various electrochemically active reaction sites.     

Bis(pyrazolyl) palladium(II), platinum(II) and gold(III) complexes: Syntheses, molecular structures and substitution reactions with l-cysteine

A series of pyrazolyl palladium(II), platinum(II) and gold(III) complexes, [PdCl₂(3,5-R₂bpza)] {R = H (1), R = Me (2), bpza = bis-pyrazolyl acetic acid}, [PtCl₂(3,5-R₂bpza)] {R = H (3a), R = Me (4)}, [AuCl₂(3,5-R₂bpza)]Cl {R = H (5a), R = Me (6a)} and [PdCl₂(3,5-R₂bpzate)] {R = Me (7)} have been synthesised and structurally characterised. Single crystal X-ray crystallography showed that the pyrazolyl ligands exhibit N^N-coordination with the metals. Anticancer activities of six complexes 1-6a were investigated against CHO cells and were found to have low activities. Substitution reactions of selected complexes 1, 2, 3a and 5a with l-cysteine show that the low anticancer activities compounds and that the rate of substitution with sulfur-containing compounds is not the cause of the low anticancer activities.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Bis-chelated-arylazoimidazole-1,10-phenanthroline-osmium(II) complexes. Structure, spectra and electrochemistry

[Os(phen)(RaaiR′)₂](PF₆)₂ [phen = 1,10-phenanthroline, RaaiR′ = 1-alkyl-2-(arylazo)imidazole, p-R-C₆H₄-NN-C₃H₂-NN-1-R′, where R = H (a), Me (b), Cl (c) and R′ = Me (2), Et (3), CH₂Ph (4) have been synthesized from the reaction of cis-trans-cis-[OsBr₂(RaaiR′)₂] with phen in the presence of aqueous AgNO₃ in ethanol. The structure of [Os(phen)(ClaaiEt)₂](PF₆)₂ was confirmed by X-ray diffraction study. Electronic spectra exhibit a strong MLCT band at 490-512 nm along with weak transition at longer wavelength 865-880 nm. Cyclic voltammetry of the complexes shows two metal redox couples, Os(III)/Os(II) at 0.9-1.0 V and Os(IV)/Os(III) at 1.4-1.6 V versus SCE, and three successive ligand reductions. The EHMO calculation using crystallographic parameters of the complex has been compared with analogous Ru and Os complexes. A correlation between electronic properties and MO results is also reported.     

Synthesis, characterisation and solution behaviour of fluoroalkyl phosphoryl complexes of tin tetrachloride

The synthesis, characterisation and solution behaviour of a series of octahedral complexes SnCl₄·2L (L = R₂NP(O)(OCH₂CF₃)₂; R = Me (1); Et (2) or L = P(O)(OCH₂R_f)₃; R_f = CF₃ (3); C₂F₅ (4)) are described. Complexes 1-4 were prepared from SnCl₄ and 2 equiv. of the ligand, L, in anhydrous CH₂Cl₂ solution. The adducts have been characterised by multinuclear (¹H, ³¹P and ¹¹⁹Sn) NMR, IR spectroscopy and elemental analysis. In dichloromethane solution, the NMR data showed the presence of a mixture of cis and trans isomers for 1 and 2 and only the cis isomer for 3 and 4. The difference could be interpreted in terms of the electronic effects of the substituents on the phosphorus atom of the ligand. In addition, the solution structure of the complexes studied by variable temperature ³¹P-{¹H} and ¹H NMR in the presence of excess ligand indicated that the ligand exchange on the cis isomer dominates the chemistry. The metal-ligand exchange barriers were estimated to be 13.38 and 11.39 kcal/mol for 1 and 3, respectively. The results are discussed and compared with those previously reported for the related hexamethylphosphoramide adduct, SnCl₄·2HMPA.     

Syntheses and characterization of triorganotin(IV) complexes of Schiff base derive from 4-amino-5-phenyl-4H-1,2,4-triazole-3-thiol and 5-amino-1,3,4-thiadiazole-2-thiol with p-phthalaldehyde

Eight triorganotin complexes of the types [(R₃Sn)₂(C₂₄H₁₆N₈S₂)].Y (R = Ph, Y = 0 (1); R = PhCH_2, Y = 2CH₃OH (2); R = n-Bu, Y = 0 (3)), [(R₃Sn)₂(C₂₄H₁₆N₈S₂)]_n (R = Me (4)), [(R₃Sn)₂(C₁₂H₆N₆S₄)] · Y (R = Ph, Y = CH₂Cl₂ (5); R = PhCH_2, Y = 0 (6)) and [(R₃Sn)₂(C₁₂H₆N₆S₄)] (R = Bu (7), R = Me (8)) have been obtained by H₂L₁ (H₂L₁ derived from 4-amino-5-phenyl-4H-1,2,4-triazole-3-thiol) and H₂L₂ (H₂L₂ derived from 5-amino-1,3,4-thiadiazole-2-thiol) with triorganotin chloride in the presence of sodium ethoxide. All the complexes were characterized by elemental, IR and NMR spectra analyses, except for complexes 1, 3, 6 and 8, other complexes were also characterized by X-ray diffraction analyses, which reveal that complexes 2 and 5 are dinuclear structures, complex 4 has a 2D network structure and complex 7 forms a macrocyclic structure linked by intermolecular N → Sn interactions.