Natural disulfide bond-disrupted mutants of AVR4 of the tomato pathogen Cladosporium fulvum are sensitive to proteolysis,circumvent Cf-4-mediated resistance,but retain their chitin binding ability

The extracellular AVR4 elicitor of the pathogenic fungus Cladosporium fulvum induces defense responses in the tomato genotype Cf-4. Here, the four disulfide bonds of AVR4 were identified as Cys-11-41, Cys-21-27, Cys-35-80, and Cys-57-72 by partial reduction with Tris-(2-carboxyethyl)-phosphine hydrochloride, subsequent cyanylation, and base-catalyzed chain cleavage. The resulting peptide fragments were analyzed by mass spectrometry. Sequence homology and the disulfide bond pattern revealed that AVR4 contains an invertebrate (inv) chitin-binding domain (ChBD). Binding of AVR4 to chitin was confirmed experimentally. The three disulfide bonds encompassing the inv ChBD motif are also required for protein stability of AVR4. Independent disruption of each of the three conserved disulfide bonds in AVR4 resulted in a protease-sensitive protein, whereas the fourth disulfide bond appeared not to be required for protein stability. Most strains of C. fulvum virulent on Cf-4 tomato contain Cys to Tyr substitutions in AVR4 involving two (Cys-11-41, Cys-35-80) of the three disulfide bonds present in the inv ChBD motif. These natural Cys to Tyr mutant AVR4 proteins did retain their chitin binding ability and when bound to chitin were less sensitive to proteases. Thus, the widely applied tomato Cf-4 resistance gene is circumvented by C. fulvum by amino acid substitutions affecting two disulfide bonds in AVR4 resulting in the absence of the corresponding AVR4 isoforms in apoplastic fluid. However, these natural isoforms of AVR4 appear to have retained their intrinsic function, i.e. binding to chitin present in the cell wall of C. fulvum, most likely to protect it against the deleterious effects of plant chitinases.     

Disulfide bonds of herpes simplex virus type 2 glycoprotein gB.

Glycoprotein B (gB) is the most highly conserved envelope glycoprotein of herpesviruses. The gB protein is required for virus infectivity and cell penetration. Recombinant forms of gB being used for the development of subunit vaccines are able to induce virus-neutralizing antibodies and protective efficacy in animal models. To gain structural information about the protein, we have determined the location of the disulfide bonds of a 696-amino-acid residue truncated, recombinant form of herpes simplex virus type 2 glycoprotein gB (HSV gB2t) produced by expression in Chinese hamster ovary cells. The purified protein, which contains virtually the entire extracellular domain of herpes simplex virus type 2 gB, was digested with trypsin under nonreducing conditions, and peptides were isolated by reversed-phase high-performance liquid chromatography (HPLC). The peptides were characterized by using mass spectrometry and amino acid sequence analysis. The conditions of cleavage (4 M urea, pH 7) induced partial carbamylation of the N termini of the peptides, and each disulfide peptide was found with two or three different HPLC retention times (peptides with and without carbamylation of either one or both N termini). The 10 cysteines of the molecule were found to be involved in disulfide bridges. These bonds were located between Cys-89 (C1) and Cys-548 (C8), Cys-106 (C2) and Cys-504 (C7), Cys-180 (C3) and Cys-244 (C4), Cys-337 (C5) and Cys-385 (C6), and Cys-571 (C9) and Cys-608 (C10). These disulfide bonds are anticipated to be similar in the corresponding gBs from other herpesviruses because the 10 cysteines listed above are always conserved in the corresponding protein sequences.     

The crystallographically determined structures of atypical strained disulfides engineered into subtilisin

The geometries of two disulfide bridges genetically engineered into subtilisin have been characterized by x-ray crystallography to determine the structural and energetic constraints involved in introducing disulfide bonds into proteins. Both disulfide bridges (Cys-24-Cys-87 and Cys-22-Cys-87) exhibit atypical sets of dihedral angles compared to those for other reported disulfide structures in proteins. The geometric trends for naturally occurring disulfides in protein crystal structures are examined. Comparison of the disulfide-containing mutant protein structures with the wild-type structure shows that, in both cases, disulfide incorporation is accommodated by relatively minor changes in local main-chain conformation. The Cys-22-Cys-87 disulfide has two high energy dihedral angles (X2 = 121 degrees, X2' = 143 degrees). Both disulfides produce short non-bonded contacts with the main-chain.     

Disulfide structure of the leucine-rich repeat C-terminal cap and C-terminal stalk region of Nogo-66 receptor

Nogo-66 receptor (NgR1) is a leucine-rich repeat (LRR) protein that forms part of a signaling complex modulating axon regeneration. Previous studies have shown that the entire LRR region of NgR1, including the C-terminal cap of the LRR, LRRCT, is needed for ligand binding, and that the adjacent C-terminal region (CT stalk) of the NgR1 contributes to interaction with its coreceptors. To provide structure-based information for these interactions, we analyzed the disulfide structure of full-length NgR1. Our analysis revealed a novel disulfide structure in the C-terminal region of the NgR1, wherein the two Cys residues, Cys-335 and Cys-336, in the CT stalk are disulfide-linked to Cys-266 and Cys-309 in the LRRCT region: Cys-266 is linked to Cys-335, and Cys-309 to Cys-336. The other two Cys residues, Cys-264 and Cys-287, in the LRRCT region are disulfide-linked to each other. The analysis also showed that Cys-419 and Cys-429, in the CT stalk region, are linked to each other by a disulfide bond. Although published crystal structures of a recombinant fragment of NgR1 had revealed a disulfide linkage between Cys-266 and Cys-309 in the LRRCT region and we verified its presence in the corresponding fragment, this is artificially caused by the truncation of the protein, since this linkage was not detected in intact NgR1 or a slightly larger fragment containing Cys-335 and Cys-336. A structural model of the LRRCT with extended residues 311-344 from the CT stalk region is proposed, and its function in coreceptor binding is discussed.     

Kinetic analysis of enhanced thermal stability of an alkaline protease with engineered twin disulfide bridges and calcium-dependent stability

The thermal stability of a cysteine-free alkaline protease (Alp) secreted by the eukaryote Aspergillus oryzae was improved both by the introduction of engineered twin disulfide bridges (Cys-69/Cys-101 and Cys-169/Cys-200), newly constructed as part of this study, and by the addition of calcium ions. We performed an extensive kinetic analysis of the increased thermal stability of the mutants as well as the role of calcium dependence. The thermodynamic activation parameters for irreversible thermal inactivation, the activation free energy (deltaG), the activation enthalpy (deltaH), and the activation entropy (deltaS) were determined from absolute reaction rate theory. The values of deltaH and deltaS were significantly and concomitantly increased as a result of introducing the twin disulfide bridges, for which the increase in the value of deltaH outweighed that of deltaS, resulting in significant increases in the value of deltaG. The enhancement of the thermal stability obtained by introducing the twin disulfide bridges is an example of the so-called low-temperature stabilization of enzymes. The stabilizing effect of calcium ions on wild-type Alp is similar to the results we obtained by introducing the engineered twin disulfide bridges.     

Dissociation of bovine cytochrome c1 subcomplex and the status of cysteine residues in the subunits

Purified bovine heart two-band cytochrome c1 subcomplex was dissociated by treatment with p-chloromercuribenzoic acid (pCMB) into its heme subunit and a colorless subunit called hinge protein, which is essential for the formation of cytochrome c1-c complex. The subcomplex was found by titration to react with 4 mol of pCMB per mol of cytochrome c1. The contents of mercury of the dissociated heme subunit and the hinge protein were 3 and 1 mol per mol of polypeptide, respectively. These results, together with the sequence analysis, indicated that the three cysteine residues in cytochrome c1 heme subunit not involved in heme-binding existed in free thiol form. One of the five cysteine residues in the hinge protein was in free form and four in two disulfide bonds. The dissociated hinge protein was digested with staphylococcal protease and the cysteine-containing peptides were separated by reversed-phase high-performance liquid chromatography (HPLC). The content of mercury and the result of performic acid oxidation of cystine peptides revealed that Cys-30 existed in free thiol form and two disulfide bridges were formed between Cys-24 and Cys-68 and between Cys-40 and Cys-54. The conformation of the hinge protein was predicted to be composed largely of either two-alpha-helical or four-alpha-helical conformation with the amino (N)-terminal 20 residues being in a random structure.     

Recombinant rat liver guanidinoacetate methyltransferase: reactivity and function of sulfhydryl groups

Rat liver guanidinoacetate methyltransferase, produced in Escherichia coli by recombinant DNA technique, possesses five cysteine residues per molecule. No disulfide bond is present. Analysis of the chymotryptic peptides derived from the iodo[14C]acetate-modified enzyme shows that Cys-90, Cys-15, Cys-219, and Cys-207 are alkylated by the reagent in order of decreasing reactivity. Incubation of the enzyme with excess 5,5'-dithiobis(2-nitrobenzoate) (DTNB) in the absence and presence of cystamine [2,2'-dithiobis(ethylamine)] causes the appearance of 4 and 5 mol of 2-nitro-5-mercaptobenzoate/mol of enzyme, respectively. Reaction of the methyltransferase with an equimolar amount of DTNB results in an almost quantitative disulfide cross-linking of Cys-15 and Cys-90 with loss of a large portion of the activity. The methyltransferase is completely inactivated by iodoacetate following nonlinear kinetics. Comparison of the extent of inactivation with that of modification of cysteine residues and the experiment with the enzyme whose Cys-15 and Cys-90 are cross-linked suggest that alkylation of Cys-15 and Cys-90 results in a partially active enzyme and that carboxymethylation of Cys-219 completely eliminates enzyme activity. The inactivation of guanidinoacetate methyltransferase by iodoacetate or DTNB is not protected by substrates. Furthermore, disulfide cross-linking of Cys-15 and Cys-90 or carboxymethylation of Cys-219 does not impair the enzyme's capacity to bind S-adenosylmethionine. Thus, these cysteine residues appear to occur outside the active-site region, but their integrity is crucial for the expression of enzyme activity.     

Primary structure of hemorrhagic protein, HR2a, isolated from the venom of Trimeresurus flavoviridis

The complete amino acid sequence and disulfide bridge location of HR2a, one of the hemorrhagic proteins isolated from the snake venom of Trimeresurus flavoviridis, have been determined by analysis of peptides derived from digests with cyanogen bromide, lysyl endopeptidase, trypsin, and Staphylococcus aureus V8 protease. Peptides were purified by gel filtration followed by reversed-phase HPLC. HR2a has the amino-terminal sequence of less than Glu-Gln-Arg- and consists of a total of 202 residues with a calculated molecular weight of 23,015. Sequence analysis indicates the presence of another isoform which lacks the amino-terminal residue, making 201 amino acid residues with a molecular weight of 22,887. Three disulfide bridges of HR2a link Cys-118 to Cys-197, Cys-159 to Cys-181, and Cys-161 to Cys-164. HR2a contains a segment which is similar to the zinc-chelating sequences found in thermolysin and several mammalian metalloproteinases, suggesting that HR2a is a metalloproteinase with limited substrate specificity. However, there is no other significant sequence homology with thermolysin except for the zinc-ligand region.     

The covalent structure of the elastase inhibitor from Anemonia sulcata--a "non-classical" Kazal-type protein

The amino-acid sequence of the proteinase inhibitor specific for elastases from the sea anemone Anemonia sulcata was determined from performic-acid oxidized inhibitor and from three cyanogen bromide fragments of reduced and carboxymethylated inhibitor. The molecule consists of a single polypeptide chain formed from 48 amino-acid residues and is stabilized by three intramolecular disulfide bridges. After cyanogen bromide cleavage of the native protein at methionines 10 and 28 followed by chymotryptic cleavage two fragments each containing a single disulfide bridge were isolated. These indicated the location of three intramolecular disulfide linkages between Cys4 and Cys34 (part of A-loop), Cys8 and Cys27 (B-loop) and Cys16 and Cys48 (C-loop). The sequential homology and the disulfide pattern identified the elastase inhibitor as a Kazal-type inhibitor in which, however, not only the CysI-CysII segment is rather short but interestingly the Cys4-Cys34 disulfide anchoring point (i.e. CysI-CysV) in the C-loop is shifted by one turn in the alpha-helical segment towards the C-terminus. Thus, the elastase inhibitor is a non-classical Kazal-type inhibitor with respect to the positioning of the half-cystines. The inhibitor molecule was modelled based on the known three-dimensional structure of the silver pheasant ovomucoid third domain. The shortened amino-terminal segment was arranged in such a manner to allow disulfide bridge formation between the first cysteine Cys4 and the replaced Cys34 under maintenance of a suitable binding loop conformation. The characteristic ovomucoid scaffold consisting of a central alpha-helix, an adjacent three-stranded beta-sheet and the proteinase-binding loop cross-connected through disulfide bridges CysI-CysV and CysIII-CysVI was conserved.     

Antiparallel alignment of the two protomers of the regulatory subunit dimer of cAMP-dependent protein kinase I

The purified type I regulatory subunit of cAMP-dependent protein kinase is a dimeric protein, and the two protomers of the dimer are linked by two interchain disulfide bonds. The disulfide linkages that join these two polypeptide chains have been identified in order to provide a structural basis for the orientation of the two chains in the asymmetric dimer. Disulfide bonds were found to exist exclusively between Cys-16 and Cys-37, and this assignment, thus, establishes a general antiparallel alignment of the two chains. Two other homologous proteins, the type II regulatory subunit and the cGMP-dependent protein kinase also are dimeric proteins. In all three proteins, a relatively small, nonhomologous, amino-terminal segment of the polypeptide chain is essential for maintaining the dimeric aggregation state.     

Rat gro/melanoma growth-stimulating activity. Assessment of the structure responsible for chemotactic activity by use of its fragments prepared by proteolysis and chemical synthesis.

Rat gro/melanoma growth-stimulating activity is a dimer composed of two identical subunits. Each subunit consists of 72 amino-acid residues and contains two disulfide bridges. In order to obtain information on the structure responsible for chemotactic activity, various fragments of gro were prepared and tested for their ability to induce chemotaxis. None of the fragments corresponding to residues 1-6, 1-21, 12-31, 36-50 or 52-72 was active as a chemoattractant. Reduced and carboxymethylated gro as well as the tryptic peptide consisting of three peptides, residues 9-21, 28-45 were and 49-61, linked by two disulfide bonds Cys-9-Cys-35 and Cys-11-Cys-51, were inactive. Also, these, peptides did not inhibit the chemotactic activity of gro. Rat gro lacking the N-terminal 6 residues had a reduced activity and the one lacking the C-terminal Lys was as active as intact gro. Therefore, an almost entire portion of the molecule including disulfide cross-links is required for chemotactic activity.     

Primary structure of a hemorrhagic metalloproteinase, HT-2, isolated from the venom of Crotalus ruber ruber

Crotalidae and Viperidae snake venoms contains several kinds of metalloproteinases which cause localized hemorrhage by direct action on blood vessel walls. We report here the entire amino acid sequence and the disulfide bridge locations of HT-2, one of the hemorrhagic toxins isolated from the venom of Crotalus ruber ruber (red rattlesnake). The non-reduced protein was first cleaved at methionine residues to provide a set of 8 fragments, which covered the entire sequence of HT-2. The disulfide bridge locations of HT-2 were also determined by using these primary fragments. The unambiguous sequence for the whole protein was then established by conventional methods using lysyl endopeptidase and thermolysin digests. HT-2 consisted of 202 amino acid residues with two disulfide bridges, which were assigned to Cys-117-Cys-197 and Cys-157-Cys-164. HT-2 had a typical zinc-chelating sequence His-Glu-X-X-His (residues 142-146) found in thermolysin, and its overall sequence showed, respectively, 50, 52, and 53% identities to those of HR2a, H2-proteinase, and the metalloproteinase domain of HR1B. However, the disulfide bridge locations of HT-2 were different from those in the other metalloproteinases. The primary structure of HT-2 was more closely related to that of Ht-d from Crotalus atrox recently determined (81% identity). From the structural comparison with five metalloproteinases so far elucidated, six conservative amino acid residues, which may possibly be related to the induction of the hemorrhagic activity, were suggested to be present in these toxins.     

Anti-chymotrypsin and anti-elastase activities of a synthetic bicyclic fragment containing a chymotrypsin-reactive site of soybean Bowman-Birk inhibitor

A bicyclic hexadecapeptide, which corresponds to the sequence 36-51 and contains the chymotrypsin-reactive Leu-43-Ser-44 bond of soybean Bowman-Birk inhibitor, has been synthesized. This peptide consists of two loops formed by disulfide bridges between Cys-36 and Cys-51 and between Cys-41 and Cys-49. The bicyclic peptide showed a strong anti-chymotryptic activity with a Ki of 7.1.10(-7) M. Comparison of inhibitory activity and digestive stability against chymotrypsin with other hexadecapeptides having the same sequence but lacking one or both disulfide bridges suggested that the compact bicyclic structure increases the activity and protects the Leu-Ser bond from chymotryptic digestion. Interestingly, the bicyclic peptide was found to inhibit porcine pancreatic elastase with a Ki of 4.3.10(-5) M, indicating the broad specificity of this ring system.     

Assignment of disulfide bridges in the fusion glycoprotein of Sendai virus.

The mature fusion (F) glycoprotein of the paramyxovirus family consists of two disulfide-linked subunits, the N-terminal F2 and the C-terminal F1 subunits, and contains 10 cysteine residues which are highly conserved at specific positions. The high level of conservation strongly suggests that they are indeed disulfide linked and play important roles in the folding and functioning of the molecule. However, it has not even been clarified which cysteine residues link the F2 and F1 subunits. This report describes our assignment of the disulfide bridges in purified Sendai virus F glycoprotein by fragmentation of the polypeptide and isolation of cystine-containing peptides and determination of their N-terminal sequences. The data demonstrate that all of the 10 cysteine residues participate in disulfide bridges and that Cys-70, the only cysteine in F2, and Cys-199, the most upstream cysteine in F1, form the interchain bond. Of the remaining eight cysteine residues clustered near the transmembrane domain of F1, the specific bridges identified are Cys-338 to Cys-347 and Cys-362 to Cys-370. Although no exact pairings between the subsequent four residues were defined, it seems likely that the most downstream, Cys-424, is linked to Cys-394, Cys-399, or Cys-401. Thus, we conclude that the cysteine-rich domain indeed contributes to the formation of a bunched structure containing at least two tandem cystine loops.     

Disulfide structures of highly bridged peptides: a new strategy for analysis.

A new approach is described for analyzing disulfide linkage patterns in peptides containing tightly clustered cystines. Such peptides are very difficult to analyze with traditional strategies, which require that the peptide chain be split between close or adjacent Cys residues. The water-soluble tris-(2-carboxyethyl)-phosphine (TCEP) reduced disulfides at pH 3, and partially reduced peptides were purified by high performance liquid chromatography with minimal thiol-disulfide exchange. Alkylation of free thiols, followed by sequencer analysis, provided explicit assignment of disulfides that had been reduced. Thiol-disulfide exchange occurred during alkylation of some peptides, but correct deductions were still possible. Alkylation competed best with exchange when peptide solution was added with rapid mixing to 2.2 M iodoacetamide. Variants were developed in which up to three alkylating agents were used to label different pairs of thiols, allowing a full assignment in one sequencer analysis. Model peptides used included insulin (three bridges, intra- and interchain disulfides; -Cys.Cys- pair), endothelin and apamin (two disulfides; -Cys.x.Cys- pair), conotoxin GI and isomers (two disulfides; -Cys.Cys- pair), and bacterial enterotoxin (three bridges within 13 residues; two -Cys.Cys- pairs). With insulin, all intermediates in the reduction pathway were identified; with conotoxin GI, analysis was carried out successfully for all three disulfide isomers. In addition to these known structures, the method has been applied successfully to the analysis of several previously unsolved structures of similar complexity. Rates of reduction of disulfide bonds varied widely, but most peptides did not show a strongly preferred route for reduction.     

Crystal structures of the semireduced and inhibitor-bound forms of cyclic nucleotide phosphodiesterase from Arabidopsis thaliana.

The crystal structure of the semireduced form of cyclic nucleotide phosphodiesterase (CPDase) from Arabidopsis thaliana has been solved by molecular replacement and refined at the resolution of 1.8 A. We have previously reported the crystal structure of the native form of this enzyme, whose main target is ADP-ribose 1",2"-cyclic phosphate, a product of the tRNA splicing reaction. CPDase possesses six cysteine residues, four of which are involved in forming two intra-molecular disulfide bridges. One of these bridges, between Cys-104 and Cys-110, is opened in the semireduced CPDase, whereas the other remains intact. This change of the redox state leads to a conformational rearrangement in the loop covering the active site of the protein. While the native structure shows this partially disordered loop in a coil conformation, in the semireduced enzyme the N-terminal lobe of this loop winds up and elongates the preceding alpha-helix. The semireduced state of CPDase also enabled co-crystallization with a putative inhibitor of its enzymatic activity, 2',3'-cyclic uridine vanadate. The ligand is bound within the active site, and the mode of binding is in agreement with the previously proposed enzymatic mechanism. Selected biophysical properties of the oxidized and the semireduced CPDase are also discussed.     

Structural Analysis and Molecular Model of a Self-Incompatibility RNase from Wild Tomato

Self-incompatibility RNases (S-RNases) are an allelic series of style glycoproteins associated with rejection of self-pollen in solanaceous plants. The nucleotide sequences of S-RNase alleles from several genera have been determined, but the structure of the gene products has only been described for those from Nicotiana alata. We report on the N-glycan structures and the disulfide bonding of the S₃-RNase from wild tomato (Lycopersicon peruvianum) and use this and other information to construct a model of this molecule. The S₃-RNase has a single N-glycosylation site (Asn-28) to which one of three N-glycans is attached. S₃-RNase has seven Cys residues; six are involved in disulfide linkages (Cys-16-Cys-21, Cys-46-Cys-91, and Cys-166-Cys-177), and one has a free thiol group (Cys-150). The disulfide-bonding pattern is consistent with that observed in RNase Rh, a related RNase for which radiographic-crystallographic information is available. A molecular model of the S₃-RNase shows that four of the most variable regions of the S-RNases are clustered on one surface of the molecule. This is discussed in the context of recent experiments that set out to determine the regions of the S-RNase important for recognition during the self-incompatibility response.     

Amino acid sequence of the sex steroid binding protein of human blood plasma

The amino acid sequence of the sex steroid binding protein (SBP) from human plasma has been determined. The SBP subunit consists of a 373-residue polypeptide chain containing two disulfide bonds and three oligosaccharide chains. The sequence was solved primarily by analysis of peptides derived by cleavage at either lysyl or methionyl residues. In our preparations, approximately half of the protein molecules have the amino-terminal sequence Arg-Pro-Val-Leu-Pro; the other half lack Arg-Pro and begin with the valine. Preparations of Hammond et al. [Hammond, G. L., Robinson, P. A., Sugino, H., Ward, D. N., & Finne, J. (1986) J. Steroid Biochem. 24, 815] have an additional leucine at the amino terminus, making a total of 373 residues in the chain. Oligosaccharide chains are placed at Thr-7 and at Asn residues 351 and 367. The two disulfide bonds connect Cys-164 to Cys-188 and Cys-333 to Cys-361. The reported heterogeneity of preparations of the molecule may result in part from the amino-terminal microheterogeneity, in part from variations in the oligosaccharide moieties, and possibly in part from rearrangements involving cyclic imide formation in two Asn-Gly sequences. Certain hydrophobic segments are suggested as possible components of the steroid-binding sites. The protein shows no homology either with the cDNA-derived sequences of the estrogen and glucocorticoid receptors found by others to be homologous with each other or with any other protein sequence in the 1986 data base.     

Disulfide structure of the pheromone binding protein from the silkworm moth, Bombyx mori

Disulfide bond formation is the only known posttranslational modification of insect pheromone binding proteins (PBPs). In the PBPs from moths (Lepidoptera), six cysteine residues are highly conserved at positions 19, 50, 54, 97, 108 and 117, but to date nothing is known about their respective linkage or redox status. We used a multiple approach of enzymatic digestion, chemical cleavage, partial reduction with Tris-(2-carboxyethyl)phosphine, followed by digestion with endoproteinase Lys-C to determine the disulfide connectivity in the PBP from Bombyx mori (BmPBP). Identification of the reaction products by on-line liquid chromatography-electrospray ionization mass spectrometry (LC/ESI-MS) and protein sequencing supported the assignment of disulfide bridges at Cys-19-Cys-54, Cys-50-Cys-108 and Cys-97-Cys-117. The disulfide linkages were identical in the protein obtained by periplasmic expression in Escherichia coli and in the native BmPBP.