Formation and Identification of Interfacial-Active Glycolipids from Resting Microbial Cells

Resting cells of Arthrobacter sp. strain DSM2567 incubated in the presence of various mono-, di-, or trisaccharides biosynthesized different glycolipids. All eight glycolipids, containing the corresponding carbohydrate moiety and one, two, or three α-branched β-hydroxy fatty acids, were produced when mannose, glucose, cellobiose, maltose, and maltotriose were used as carbon sources in a simple phosphate buffer. The structures of the compounds were elucidated by means of ¹H and ¹³C nuclear magnetic resonance spectroscopy and by chemical ionization mass spectroscopy. In high-salinity solution, the substances showed different surfactant properties. Cellobiose and maltose monocorynomycolates reduced the interfacial tension from 42 to 1 mN/m at critical micelle concentrations below 20 mg/liter.     

The effect of titanium dioxide nanoparticles on pulmonary surfactant function and ultrastructure

Background

Pulmonary surfactant reduces surface tension and is present at the air-liquid interface in the alveoli where inhaled nanoparticles preferentially deposit. We investigated the effect of titanium dioxide (TiO₂) nanosized particles (NSP) and microsized particles (MSP) on biophysical surfactant function after direct particle contact and after surface area cycling in vitro. In addition, TiO₂ effects on surfactant ultrastructure were visualized.

Methods

A natural porcine surfactant preparation was incubated with increasing concentrations (50-500 μg/ml) of TiO₂ NSP or MSP, respectively. Biophysical surfactant function was measured in a pulsating bubble surfactometer before and after surface area cycling. Furthermore, surfactant ultrastructure was evaluated with a transmission electron microscope.

Results

TiO₂ NSP, but not MSP, induced a surfactant dysfunction. For TiO₂ NSP, adsorption surface tension (γ_ads) increased in a dose-dependent manner from 28.2 ± 2.3 mN/m to 33.2 ± 2.3 mN/m (p < 0.01), and surface tension at minimum bubble size (γ_min) slightly increased from 4.8 ± 0.5 mN/m up to 8.4 ± 1.3 mN/m (p < 0.01) at high TiO₂ NSP concentrations. Presence of NSP during surface area cycling caused large and significant increases in both γ_ads (63.6 ± 0.4 mN/m) and γ_min (21.1 ± 0.4 mN/m). Interestingly, TiO₂ NSP induced aberrations in the surfactant ultrastructure. Lamellar body like structures were deformed and decreased in size. In addition, unilamellar vesicles were formed. Particle aggregates were found between single lamellae.

Conclusion

TiO₂ nanosized particles can alter the structure and function of pulmonary surfactant. Particle size and surface area respectively play a critical role for the biophysical surfactant response in the lung.     

Study on the Reutilization of Clear Fracturing Flowback Fluids in Surfactant Flooding with Additives for Enhanced Oil Recovery (EOR)

An investigation was conducted to study the reutilization of clear fracturing flowback fluids composed of viscoelastic surfactants (VES) with additives in surfactant flooding, making the process more efficient and cost-effective. The clear fracturing flowback fluids were used as surfactant flooding system with the addition of α-olefin sulfonate (AOS) for enhanced oil recovery (EOR). The interfacial activity, emulsification activity and oil recovery capability of the recycling system were studied. The interfacial tension (IFT) between recycling system and oil can be reduced by 2 orders of magnitude to 10⁻³ mN/m, which satisfies the basic demand of surfactant flooding. The oil can be emulsified and dispersed more easily due to the synergetic effect of VES and AOS. The oil-wet surface of quartz can be easily converted to water-wet through adsorption of surfactants (VES/AOS) on the surface. Thirteen core plug flooding tests were conducted to investigate the effects of AOS concentrations, slug sizes and slug types of the recycling system on the incremental oil recovery. The investigations prove that reclaiming clear fracturing flowback fluids after fracturing operation and reuse it in surfactant flooding might have less impact on environment and be more economical.     

Material Studies of Lipid Vesicles in the Lα and Lα-Gel Coexistence Regimes

In this work, we utilize micropipette aspiration and fluorescence imaging to examine the material properties of lipid vesicles made from mixtures of palmitoyloleoylphosphocholine (POPC) and dipalmitoylphosphatidylcholine (DPPC). At elevated temperatures/low DPPC fractions, these lipids are in a miscible liquid crystalline (L_α) state, whereas at lower temperatures/higher DPPC fractions they phase-separate into L_α and gel phases. We show that the elastic modulus, K, and critical tension, τ_c, of L_α vesicles are independent of DPPC fraction. However, as the sample temperature is increased from 15°C to 45°C, we measure decreases in both K and τ_c of 20% and 50%, respectively. The elasticity change is likely driven by a change in interfacial tension. We describe the reduction in critical tension using a simple model of thermally activated membrane pores. Vesicles with two-phase coexistence exhibit material properties that differ from L_α vesicles including critical tensions that are 20–40% lower. Fluorescence imaging of phase coexistent POPC/DPPC vesicles shows that the DPPC-rich domains exist in an extended network structure that exhibits characteristics of a solid. This gel network explains many of the unusual material properties of two-phase membranes.     

Investigation of potential biosurfactant production among phytopathogenic corynebacteria and related soil microbes

PhytopathogenicCorynebacterium species and related soil microbes were examined for their ability to produce surfactants from hydrocarbon substrate. Surfactant production was detected by the lowering of both surface and interfacial tensions, by the formation of high reciprocal critical micelle concentrations (CMCs), and by the possession of properties of emulsification and demulsification. Whole broth cultures of severalC. fascians strains,C. insidiosum ICPB CI13A,Arthrobacter paraffineus NRRL B-3453, andNocardia amarae NRRL B-8176 lowered surface tensions from 58.5 mN/m to 27–33 mN/m, lowered interfacial tensions from 33.5 mN/m to 0.55–4.0 mN/m, and had high reciprocal CMCs. Whole-broth cultures ofN. amarae NRRL B-8176 had excellent demulsification ability; those of someC. fascians strains andC. insidiosum ICPB CI13A produced unusual gel-like emulsions. These properties are believed to aid in the attachment of phytopathogenic corynebacteria to the surfaces of host plants.     

Property control of sophorolipids: influence of fatty acid substrate and blending

Sophorolipids (SLs) were synthesized by fed-batch fermentation of Candida bombicola on glucose and either palmitic acid (SL-p), stearic acid (SL-s), oleic acid (SL-o) or linoleic acid (SL-l) and the structural distribution accurately determined by atmospheric pressure chemical ionization-mass spectrometry (APCI-MS). The surfactant properties, including critical micelle concentration (CMC), minimum surface tension (min.ST) and oil-water interfacial tension (IFT) were measured by tensiometry. Minimum STs of 35–36 mN/m were obtained regardless of the substrate while IFTs ranged from 3–5 mN/m with the exception of SL-l, which had an IFT of 7 mN/m. The largest disparity occurred in the CMC values, which ranged from 35 ppm for SL-s to 250 ppm for SL-l. By manually mixing these four SLs in different ratios, it was possible to better control the CMC values without affecting the min.ST or IFT, which will prove beneficial as new applications for SLs are established. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

β-Cyclodextrin-Based Inclusion Complexation Bridged Biodegradable Self-Assembly Macromolecular Micelle for the Delivery of Paclitaxel

In this study, a novel adamantanamine-paclitaxel (AD-PTX) incorporated oligochitosan- carboxymethyl-β-cyclodextrin (CSO-g-CM-β-CD) self-assembly macromolecular (CSO-g-CM-β-CD@AD-PTX) micelle was successfully prepared in water through sonication. The formed molecules were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance (NMR) spectroscopy, two-dimensional NMR, elemental analysis, and liquid chromatography-mass spectrometry, while the correspondent micelles were characterized by dynamic light scattering and transmission electron microscopy. We showed that the macromolecular micelle contained a spherical core-shell structure with a diameter of 197.1 ± 3.3 nm and zeta potential of −19.1 ± 4.3 mV. The CSO-g-CM-β-CD@AD-PTX micelle exhibited a high drug-loading efficacy up to 31.3%, as well as a critical micelle concentration of 3.4 × 10^-7 M, which indicated good stability. Additionally, the in vitro release profile of the CSO-g-CM-β-CD@AD-PTX micelle demonstrated a long-term release pattern, 63.1% of AD-PTX was released from the micelle during a 30-day period. Moreover, the CSO-g-CM-β-CD@AD-PTX micelle displayed cytotoxicity at a sub-μM scale similar to PTX in U87 MG cells, and CSO-g-CM-β-CD exhibited a good safety profile by not manifesting significant toxicity at concentrations up to 100 μM. These results indicated that β-CD-based inclusion complexation resulting in biodegradable self-assembled macromolecular micelles can be utilized as nanocarrier, and may provide a promising platform for drug delivery in the future medical applications.     

Co-Utilization of Canola Oil and Glucose on the Production of a Surfactant by <Emphasis Type="Italic">Candida lipolytica</Emphasis>

Candida lipolytica synthesized a surfactant in a cultivation medium supplemented with canola oil and glucose as carbon sources. Measurements of biosurfactant production and surface tension indicated that the biosurfactant was produced at 48 h of fermentation. The surface-active species is constituted by the protein–lipid–polysaccharide complex in nature. The cell-free broth was particularly influenced by the addition of salt, the pH and temperature depending on the emulsified substrate (hexadecane or a vegetable oil). After comparison between ethyl acetate and mixtures of chloroform and methanol as solvent systems for surfactant recovery, it was found that ethyl acetate was able to extract crude surfactant material with high product recovery (8.0 g/L). The isolated biosurfactant decreased the surface tension to values of 30 mN/m at the critical micelle concentration. Emulsification properties of the biosurfactant produced were compared to those of commercial emulsifiers and other microbial surfactants.     

Biochemical, Genetic, and Zoosporicidal Properties of Cyclic Lipopeptide Surfactants Produced by Pseudomonas fluorescens

Zoospores play an important role in the infection of plant and animal hosts by oomycetes and other zoosporic fungi. In this study, six fluorescent Pseudomonas isolates with zoosporicidal activities were obtained from the wheat rhizosphere. Zoospores of multiple oomycetes, including Pythium species, Albugo candida, and Phytophthora infestans, were rendered immotile within 30 s of exposure to cell suspensions or cell culture supernatants of the six isolates, and subsequent lysis occurred within 60 s. The representative strain SS101, identified as Pseudomonas fluorescens biovar II, reduced the surface tension of water from 73 to 30 mN m⁻¹. The application of cell suspensions of strain SS101 to soil or hyacinth bulbs provided significant protection against root rot caused by Pythium intermedium. Five Tn5 mutants of strain SS101lacked the abilities to reduce the surface tension of water and to cause lysis of zoospores. Genetic characterization of two surfactant-deficient mutants showed that the transposons had integrated into condensation domains of peptide synthetases. A partially purified extract from strain SS101 reduced the surface tension of water to 30 mN m⁻¹ and reached the critical micelle concentration at 25 μg ml⁻¹. Reverse-phase high-performance liquid chromatography yielded eight different fractions, five of which had surface activity and caused lysis of zoospores. Mass spectrometry and nuclear magnetic resonance analyses allowed the identification of the main constituent as a cyclic lipopeptide (1,139 Da) containing nine amino acids and a 10-carbon hydroxy fatty acid. The other four zoosporicidal fractions were closely related to the main constituent, with molecular massesranging from 1,111 to 1,169 Da.     

Deep Desulfurization of Diesel Oil and Crude Oils by a Newly Isolated Rhodococcus erythropolis Strain

The soil-isolated strain XP was identified as Rhodococcus erythropolis. R. erythropolis XP could efficiently desulfurize benzonaphthothiophene, a complicated model sulfur compound that exists in crude oil. The desulfurization product of benzonaphthothiophene was identified as α-hydroxy-β-phenyl-naphthalene. Resting cells could desulfurize diesel oil (total organic sulfur, 259 ppm) after hydrodesulfurization. The sulfur content of diesel oil was reduced by 94.5% by using the resting cell biocatalyst for 24 h at 30°C. Biodesulfurization of crude oils was also investigated. After 72 h of treatment at 30°C, 62.3% of the total sulfur content in Fushun crude oil (initial total sulfur content, 3,210 ppm) and 47.2% of that in Sudanese crude oil (initial total sulfur, 1,237 ppm) were removed. Gas chromatography with pulsed-flame photometric detector analysis was used to evaluate the effect of R. erythropolis XP treatment on the sulfur content in Fushun crude oil, and it was shown that most organic sulfur compounds were eliminated after biodesulfurization.     

Biosurfactant production by Pseudomonas fluorescens 378: growth and product characteristics

Summary An isolate of Pseudomonas fluorescens, strain 378 was shown to produce a novel surface active compound (code name AP-6). The compound is unique in being a high molecular weight compound but has, in some aspects, properties of a low molecular weight surfactant. The product is extracellular and its formation appeared to be partly growth-associated. Using a semisynthetic medium, fermentor cultivations were performed in the pH range 6.8–8.4. The product yield was optimal at pH 8.0 and gave a final concentration of 210 times critical micelle dilution. At higher pH, specific growth rate, final biomass and product concentration decreased. It consists mainly of carbohydrates and protein, the molecular weight is 1×10⁶ and the isoelectric point is pH 9.1.The surface tension of an aqueous solution reached 27 mN/m which is a very low value even compared to other surfactants of considerably lower size and the critical micelle concentration was less than 10 mg/l in 0.9% (w/v) NaCl. The kinetics of the adsorption process at the air-water interface was studied using the drop volume technique, and the reaction was found to be rapid, considering the size of the molecule. A concentration as low as 0.025 g/l reached a surface tension of 30 mN/m within 70 s.     

The mycocidal, membrane-active complex of Cryptococcus humicola is a new type of cellobiose lipid with detergent features

The chemical composition of the mycocidal complex (formerly known as microcin) secreted by Cryptococcus humicola was investigated by chemical, mass spectrometric and nuclear magnetic resonance methods. The results indicate that the mycocidal complex is composed of glycolipids with a highly acetylated (up to five acetyl groups) cellobiose backbone [β-D-Glcp-(1′→4)-β-D-Glcp] linked to the ω-hydroxyl group of α,ω-dihydroxy palmitate [16:0-α,ω-di-OH] with an unsubstituted carboxyl group. The acyl chain forming aglycon can be replaced by [18:0-(α,ω-di-OH)], [18:0-(α,ω-1,ω-tri-OH)], and [18:0-(α,ω-2,ω-tri-OH)]. The complex has a comparatively high surface activity; 0.5 mg/ml of it reduced the surface tension of 0.1 M NaHCO₃ from 71 mN/m to 37 mN/m and interfacial tension against n-hexadecane from 39 mN/m to 10 mN/m. The critical micelle concentration of the complex at pH 4.0, determined by the fluorometric method with N-phenyl-1-naphthylamine as fluorescent probe and by the De Nouy ring method, was 2×10⁻⁵ M (taking the average molecular mass of the complex to be 750); it did not depend on the presence of 100 mM KCl and was an order of magnitude higher at pH 7.0. By fluorescence resonance energy transfer spectroscopy with N-(7-nitro-2,1,3-benzoxadiazol-4-yl)-phosphatidylethanolamine as energy donor and N-(rhodamine B sulfonyl)-phosphatidylethanolamine as energy acceptor the complex was shown to intercalate into the liposomal lipid matrix. Primary lesions caused by the complex in planar lipid bilayers were revealed as short-living current fluctuations of a broad spectrum of amplitudes. The mycocidal effect of the complex is suggested to be associated with its detergent-like properties.     

Geometrical Membrane Curvature as an Allosteric Regulator of Membrane Protein Structure and Function

Transmembrane proteins are embedded in cellular membranes of varied lipid composition and geometrical curvature. Here, we studied for the first time the allosteric effect of geometrical membrane curvature on transmembrane protein structure and function. We used single-channel optical analysis of the prototypic transmembrane β-barrel α-hemolysin (α-HL) reconstituted on immobilized single small unilamellar liposomes of different diameter and therefore curvature. Our data demonstrate that physiologically abundant geometrical membrane curvatures can enforce a dramatic allosteric regulation (1000-fold inhibition) of α-HL permeability. High membrane curvatures (1/diameter ∼1/40 nm⁻¹) compressed the effective pore diameter of α-HL from 14.2 ± 0.8 Å to 11.4 ± 0.6 Å. This reduction in effective pore area (∼40%) when combined with the area compressibility of α-HL revealed an effective membrane tension of ∼50 mN/m and a curvature-imposed protein deformation energy of ∼7 k_BT. Such substantial energies have been shown to conformationally activate, or unfold, β-barrel and α-helical transmembrane proteins, suggesting that membrane curvature could likely regulate allosterically the structure and function of transmembrane proteins in general.     

Physical and chemical properties of a biosurfactant synthesized by Rhodococcus species H13-A

The chemical and physical properties of a biosurfactant synthesized by hexadecane-grown Rhodococcus species H13-A are described. The biosurfactant is an anionic glycolipid consisting of 1 major and 10 minor components. The hydrophilic portion of the molecule is trehalose, which is acylated with normal C(10) to C(22) saturated and unsaturated fatty acids, C(35) to C(40) mycolic acids, hexanedioic and dodecanedioic acids, and 10-methyl hexadecanoic and 10-methyl octadecanoic acids. The major glycolipid species was identified as 2,3,4,6,2',3',4',6'-octaacyltrehalose, plus minor glycolipid species of di-, tetra- and hexa-acyltrehalose derivatives. The glycolipid exhibited a critical micelle concentration of 1.5?mg/mL and minimum interfacial tension value of 2?×?10(-2)?mN/m against decane, with a further reduction in interfacial tension to 6?×?10(-5)?mN/m in the presence of the cosurfactant pentanol. The phase behavior of the glycolipid indicates the formation of a surfactant-rich, "middle-phase" microemulsion containing liquid crystals, both of which are associated with surfactant systems having ultralow interfacial tension values. Key words: trehalose lipids, glycolipids, biosurfactants.     

Production and characterization of biosurfactant from marine bacterium Inquilinus limosus KB3 grown on low-cost raw materials

Inquilinus limosus strain KB3, isolated from marine sediment in the south of Thailand, was used to produce a biosurfactant from a mineral salts medium (MSM) with palm oil decanter cake (PODC) as a carbon source. It was found that cellular growth and biosurfactant production in MSM were greatly affected by the medium components. I. limosus KB3 was able to grow and to produce surfactant reducing the surface tension of medium to 28.2 mN/m and giving a crude surfactant concentration of 5.13 g/l after 54 h. The biosurfactant obtained was found to reduce the surface tension of pure water to 25.5 mN/m with the critical micelle concentration of 9 mg/l, and retained its properties during exposure to elevated temperatures (121 °C), high salinity (12 % NaCl), and a wide range of pH values. Chemical characterization by FT-IR, NMR, and ESI-MS revealed that the biosurfactant has a lipopeptide composition with molecular mass (m/z) of 1,032. The biosurfactant was capable of forming stable emulsions with various hydrocarbons and had the ability to enhance oil recovery, PAHs solubility, and antimicrobial activity.     

Interfacial and micellar behavior of glucose lipid

Summary Glucose lipid of notable surfactant properties was produced by using hydrocarbon assimilating bacterium of the bacterial strain MM1. Its surface active properties were notable in spite of ,-hydrophilic and bulky molecule. The critical micelle concentration (cmc) was small (0.165 M); surface and interfacial tension for hexadecane at 0.1 % (pH 7.35) solution, 24.6 and 13.3 mN/m, respectively. The emulsifying action was excellent and comparable to those of rhamnolipids. The micelle has the outer radius. 28.5 Å and inner core, 6.7 Å on the basis of the concentric spherical shell model by means of the small angle X-ray solution scattering measurement.Dedicated to Professor Fritz Wagner on the occasion of his 65th birthday.     

Mixed Micelles of Sodium Cholate and Sodium Dodecylsulphate 1:1 Binary Mixture at Different Temperatures – Experimental and Theoretical Investigations

Micellisation process for sodium dodecyl sulphate and sodium cholate in 1∶1 molar ratio was investigated in a combined approach, including several experimental methods and coarse grained molecular dynamics simulation. The critical micelle concentration (cmc) of mixed micelle was determined by spectrofluorimetric and surface tension measurements in the temperature range of 0–50°C and the values obtained agreed with each other within the statistical error of the measurements. In range of 0–25°C the cmc values obtained are temperature independent while cmc values were increased at higher temperature, which can be explained by the intensive motion of the monomers due to increased temperature. The evidence of existing synergistic effect among different constituent units of the micelle is indicated clearly by the interaction parameter (β_1,2) calculated from cmc values according to Rubingh. As the results of the conductivity measurements showed the negative surface charges of the SDS-NaCA micelle are not neutralized by counterions. Applying a 10 µs long coarse-grained molecular dynamics simulation for system including 30-30 SDS and CA (with appropriate number of Na⁺ cations and water molecules) we obtained semi-quantitative agreement with the experimental results. Spontaneous aggregation of the surfactant molecules was obtained and the key steps of the micelle formation are identified: First a stable SDS core was formed and thereafter due to the entering CA molecules the size of the micelle increased and the SDS content decreased. In addition the size distribution and composition as well as the shape and structure of micelles are also discussed.     

Bench-Scale Production of Biosurfactants and their Potential in Ex-Situ MEOR Application

The fermentative production of biosurfactants by five Bacillus strains in a bench-scale bioreactor and evaluation of biosurfactant-based enhanced oil recovery using sand pack columns were investigated. Adjusting the initial dissolved oxygen to 100% saturation, without any further control and with collection of foam and recycling of biomass, gave higher biosurfactant production. The microorganisms were able to produce biosurfactants, thus reducing the surface tension and interfacial tension to 28 mN/m and 5.8–0.5 mN/m, respectively, in less than 10 hours. The crude surfactant concentration of 0.08–1.1 g/L, and critical micelle concentration (CMC) values of 19.4–39 mg/L, corresponding to the biosurfactants produced by the different Bacillus strains, were observed. The efficiency of crude biosurfactant preparation obtained from Bacillus strains for enhanced oil recovery, by sand pack column studies, revealed it to vary from 30.22–34.19% of the water flood residual oil saturation. The results are indicative of the potential of the strains for the development of ex-situ, microbial-enhanced, oil recovery processes.     

Effects of carbon and nitrogen sources on rhamnolipid biosurfactant production by <Emphasis Type="Italic">Pseudomonas nitroreducens</Emphasis> isolated from soil

Rhamnolipid biosurfactant production by Pseudomonas nitroreducens isolated from petroleum-contaminated soil was investigated. The effects of carbon, nitrogen and carbon to nitrogen ratio on biosurfactant production were examined using mineral salts medium as the growth medium. The tenso-active properties (surface activity and critical micelle concentrations of the produced biosurfactant were also evaluated. The best carbon source, nitrogen source were glucose and sodium nitrate giving rhamnolipid yields of 5.28 and 4.38 g l⁻¹, respectively. The maximum rhamnolipid production of 5.46 g l⁻¹ was at C/N (glucose/sodium nitrate) of 22. The rhamnolipid biosurfactant reduced the surface tension of water from 72 to ~37 mN/m. It also has critical micelle concentration of ~28 mg l⁻¹. Thus, the results presented in our reports show that the produced rhamnolipid can find wide applications in various bioremediation activities such as enhanced oil recovery and petroleum degradation.     

Nutritional requirements and growth characteristics of a biosurfactant-producingRhodococcus bacterium

The nutritional requirements and growth characteristics of a biosurfactant-producingRhodococcus bacterium isolated from Kuwaiti soil were determined. Maximum cell yields (6.6 g/l) and biosurfactant production were achieved with a medium containing 2% (v/v)n-paraffin as a carbon and energy source, 0.2% lactose broth, optimal concentrations of nitrogen (nitrate), phosphorus, iron, magnesium and sodium sources, and minimal concentrations of potassium and trace element sources. The optimal pH was 6.8 for surfactant production and optimal temperature was 37°C. The biosurfactant produced after 16 to 33 h growth in a 7 I fermenter decreased both surface tension and interfacial tension of culture broth to below 27 and 1.8 mN/m, respectively, and was effective at critical micelle dilutions of 10^–3. Data on biosurfactant biosynthesis suggest that the product is produced as a primary metabolite and, therefore, could be produced effectively under continuous fermentation conditions.A.S. Abu-Ruwaida, S. Haditirto and A. Khamis are with the Kuwait Institute for Scientific Research, Biotechnology Department, P.O. Box 24885, 13109, Safat, Kuwait. I.M. Banat is now in Londonderry, Northern Ireland but was at the Kuwait Institute for Scientific Research at the time this paper was written. A.S. Abu-Ruwaida is the corresponding author.In view of the annexation of Kuwait by Iraq in August 1990, this paper has been accepted without return to the author for attention to minor details. The Editor-in-Chief therefore assumes full responsibility for any errors or omissions.