High‐Voltage‐Driven Surface Structuring and Electrochemical Stabilization of Ni‐Rich Layered Cathode Materials for Li Rechargeable Batteries

Layered lithium–nickel–cobalt–manganese oxide (NCM) materials have emerged as promising alternative cathode materials owing to their high energy density and electrochemical stability. Although high reversible capacity has been achieved for Ni‐rich NCM materials when charged beyond 4.2 V versus Li⁺/Li, full lithium utilization is hindered by the pronounced structural degradation and electrolyte decomposition. Herein, the unexpected realization of sustained working voltage as well as improved electrochemical performance upon electrochemical cycling at a high operating voltage of 4.9 V in the Ni‐rich NCM LiNi_0.895Co_0.085Mn_0.02O₂ is presented. The improved electrochemical performance at a high working voltage at 4.9 V is attributed to the removal of the resistive Ni²⁺O rock‐salt surface layer, which stabilizes the voltage profile and improves retention of the energy density during electrochemical cycling. The manifestation of the layered Ni²⁺O rock‐salt phase along with the structural evolution related to the metal dissolution are probed using in situ X‐ray diffraction, neutron diffraction, transmission electron microscopy, and X‐ray absorption spectroscopy. The findings help unravel the structural complexities associated with high working voltages and offer insight for the design of advanced battery materials, enabling the realization of fully reversible lithium extraction in Ni‐rich NCM materials.     

Synthesis and Characterization of Lithium Bis(fluoromalonato)borate for Lithium‐Ion Battery Applications

A new orthochelated salt, lithium bis(monofluoromalonato)borate (LiBFMB), is synthesized and purified for application in lithium‐ion batteries. The presence of fluorine in the borate anion of LiBFMB increases its oxidation potential and also facilitates ion dissociation, as reflected by the ratio of ionic conductivity (σ_exp) and ion diffusivity coefficients (σ_NMR). Half‐cell tests using 5.0 V lithium nickel manganese oxide (LiNi_0.5Mn_1.5O₄) as a cathode and ethylene carbonate (EC)/dimethyl carbonate (DMC)/diethyl carbonate (DEC) as a solvent reveals that the impedance of the LiBFMB cell is much larger than those of LiPF₆‐ and lithium bis(oxalato)borate (LiBOB)‐based cells, which results in lower capacity and poor cycling performance of the former. X‐ray photoelectron spectroscopy (XPS) results for the cycled cathode electrode suggest that because of the stability of the LiBFMB salt, the solid electrolyte interphase (SEI) formed on the cathode surface is significantly different from those of LiPF₆ and LiBOB based electrolytes, resulting in more solvent decomposition and a thicker SEI layer. Initial results also indicate that using a high dielectric constant solvent, propylene carbonate, alters the surface chemistry, reduces the interfacial impedance, and enhances the performance of LiBFMB‐based 5.0 V cell.     

High‐Voltage Oxygen‐Redox‐Based Cathode for Rechargeable Sodium‐Ion Batteries

Recently, anionic‐redox‐based materials have shown promising electrochemical performance as cathode materials for sodium‐ion batteries. However, one of the limiting factors in the development of oxygen‐redox‐based electrodes is their low operating voltage. In this study, the operating voltage of oxygen‐redox‐based electrodes is raised by incorporating nickel into P2‐type Na_2/3[Zn_0.3Mn_0.7]O₂ in such a way that the zinc is partially substituted by nickel. As designed, the resulting P2‐type Na_2/3[(Ni_0.5Zn_0.5)_0.3Mn_0.7]O₂ electrode exhibits an average operating voltage of 3.5 V and retains 95% of its initial capacity after 200 cycles in the voltage range of 2.3–4.6 V at 0.1C (26 mA g^?1). Operando X‐ray diffraction analysis reveals the reversible phase transition: P2 to OP4 phase on charge and recovery to the P2 phase on discharge. Moreover, ex situ X‐ray absorption near edge structure and X‐ray photoelectron spectroscopy studies reveal that the capacity is generated by the combination of Ni²⁺/Ni⁴⁺ and O^2?/O^1? redox pairs, which is supported by first‐principles calculations. It is thought that this kind of high voltage redox species combined with oxygen redox could be an interesting approach to further increase energy density of cathode materials for not only sodium‐based rechargeable batteries, but other alkali‐ion battery systems.     

Cross Talk between Transition Metal Cathode and Li Metal Anode: Unraveling Its Influence on the Deposition/Dissolution Behavior and Morphology of Lithium

Lithium metal batteries (LMBs) combining a Li metal anode with a transition metal (TM) cathode can achieve higher practical energy densities (Wh L^?1) than Li/S or Li/O₂ cells. Research for improving the electrochemical behavior of the Li metal anode by, for example, modifying the liquid electrolyte is often conducted in symmetrical Li/Li or Li/Cu cells. This study now demonstrates the influence of the TM cathode on the Li metal anode, thus full cell behavior is analyzed in a way not considered so far in research with LMBs. Therefore, the deposition/dissolution behavior of Li metal and the resulting morphology is investigated with three different cathode materials (LiNi_0.5Mn_1.5O₄, LiNi_0.6Mn_0.2Co_0.2O₂, and LiFePO₄) by post mortem analysis with a scanning electron microscope. The observed large differences of the Li metal morphology are ascribed to the dissolution and crossover of TMs found deposited on Li metal and in the electrolyte by X‐ray photoelectron spectroscopy, energy‐dispersive X‐ray spectroscopy, and total reflection X‐ray fluorescence analysis. To support this correlation, the TM dissolution is simulated by adding Mn salt to the electrolyte. This study offers new insights into the cross talk between the Li metal anodes and TM cathodes, which is essential, when investigating Li metal electrodes for LMB full cells.     

Electrolytes toward High‐Voltage Na3V2(PO4)2F3 Positive Electrode Durable against Temperature Variation

High power and energy density, long cyclability, and tolerance for wide temperature (seasonal and daily operational temperature differences) must be considered to construct large‐scale sodium secondary batteries. In this regard, Na₃V₂(PO₄)₂F₃ (NVPF) has become a subject of interest as a high‐performance positive electrode material owing to its high energy density. However, the high operating voltage of NVPF causes continuous decomposition of electrolytes during cycles, resulting in significant capacity fading and low Coulombic efficiency. In this study, the electrochemical performance of the NVPF electrode in organic solvent electrolytes with and without additives and an ionic liquid is investigated at high voltage regimes over a wide temperature range (?20 °C to 90 °C). The results reveal that the performance of organic electrolytes is still insufficient even with additives, and the ionic liquid electrolyte demonstrates high electrochemical stability and cyclability with NVPF electrodes over a temperature range from ?20 °C to 90 °C, achieving stable cycling over 500 cycles. The detailed electrochemical analysis combined with X‐ray photoelectron and energy dispersive X‐ray spectroscopy indicates that a sturdy cathode electrolyte interphase layer around the electrode protects it from capacity fading at high voltage and elevated temperature, resulting in high Coulombic efficiency.     

A Novel Strategy to Suppress Capacity and Voltage Fading of Li‐ and Mn‐Rich Layered Oxide Cathode Material for Lithium‐Ion Batteries

Poor cycling stability is one of the key scientific issues needing to be solved for Li‐ and Mn‐rich layered oxide cathode. In this paper, sodium carboxymethyl cellulose (CMC) is first used as a novel binder in Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ cathode to enhance its cycling stability. Electrochemical performance is conducted by galvanostatic charge and discharge. Structure and morphology are characterized by X‐ray diffraction, scanning electronic microscopy, high‐resolution transmission electron microscopy, and X‐ray photoelectron spectroscopy. Results reveal that the CMC as binder can not only stabilize the electrode structure by preventing the electrode materials to detach from the current collector but also suppress the voltage fading of the Li_1.2Ni_0.13Co_0.13Mn_0.54O₂ cathode due to Na⁺ ions doping. Most importantly, the dissolution of metal elements from the cathode materials into the electrolyte is also inhibited.     

Fluorinated End‐Groups in Electrolytes Induce Ordered Electrolyte/Anode Interface Even at Open‐Circuit Potential as Revealed by Sum Frequency Generation Vibrational Spectroscopy

Fluorine‐based additives have a tremendously beneficial effect on the performance of lithium‐ion batteries, yet the origin of this phenomenon is unclear. This paper shows that the formation of a solid‐electrolyte interphase (SEI) on the anode surface in the first five charge/discharge cycles is affected by the stereochemistry of the electrolyte molecules on the anode surface starting at open‐circuit potential (OCP). This study shows an anode‐specific model system, the reduction of 1,2‐diethoxy ethane with lithium bis(trifluoromethane)sulfonimide, as a salt on an amorphous silicon anode, and compares the electrochemical response and SEI formation to its fluorinated version, bis(2,2,2‐trifluoroethoxy) ethane (BTFEOE), by sum frequency generation (SFG) vibrational spectroscopy under reaction conditions. The SFG results suggest that the ? CF₃ end‐groups of the linear ether BTFEOE change their adsorption orientation on the a‐Si surface at OCP, leading to a better protective layer. Supporting evidence from ex situ scanning electron microscopy and X‐ray photoelectron spectroscopy depth profiling measurements shows that the fluorinated ether, BTFEOE, yields a smooth SEI on the a‐Si surface and enables lithium ions to intercalate deeper into the a‐Si bulk.     

A New Electrolyte Formulation for Securing High Temperature Cycling and Storage Performances of Na‐Ion Batteries

The Na‐ion battery is recognized as a possible alternative to the Li‐ion battery for applications where power and cost override energy density performance. However, the increasing instability of their electrolyte with temperature is still problematic. Thus, a central question remains how to design Na‐based electrolytes. Here, the discovery of a Na‐based electrolyte formulation is reported which enlists four additives (vinylene carbonate, succinonitrile, 1,3‐propane sultone, and sodium difluoro(oxalate)borate) in proper quantities that synergistically combine their positive attributes to enable a stable solid electrolyte interphase at both negative and positive electrodes surface at 55 °C. Moreover, the role of each additive that consists in producing specific NaF coatings, thin elastomers, sulfate‐based deposits, and so on via combined impedance and X‐ray photoelectron spectroscopy is rationalized. It is demonstrated that empirical electrolyte design rules previously established for Li‐ion technology together with theoretical guidance is vital in the quest for better Na‐based electrolytes that can be extended to other chemistries. Overall, this finding, which is implemented to 18 650 cells, widens the route to the rapid development of the Na‐ion technology based on Na₃V₂(PO₄)₂F₃/C chemistry.     

Stabilized Co‐Free Li‐Rich Oxide Cathode Particles with An Artificial Surface Prereconstruction

Li‐rich metal oxide (LXMO) cathodes have attracted intense interest for rechargeable batteries because of their high capacity above 250 mAh g^?1. However, the side effects of hybrid anion and cation redox (HACR) reactions, such as oxygen release and phase collapse that result from global oxygen migration (GOM), have prohibited the commercialization of LXMO. GOM not only destabilizes the oxygen sublattice in cycling, aggravating the well‐known voltage fading, but also intensifies electrolyte decomposition and Mn dissolution, causing severe full‐cell performance degradation. Herein, an artificial surface prereconstruction (ASR) for Li_1.2Mn_0.6Ni_0.2O₂ particles with a molten‐molybdate leaching is conducted, which creates a crystal‐dense anion‐redox‐free LiMn_1.5Ni_0.5O₄ shell that completely encloses the LXMO lattice (ASR‐LXMO). Differential electrochemical mass spectroscopy and soft X‐ray absorption spectroscopy analyses demonstrate that GOM is shut down in cycling, which not only stabilizes HACR in ASR‐LXMO, but also mitigates the electrolyte decomposition and Mn dissolution. ASR‐LXMO displays greatly stabilized cycling performance as it retains 237.4 mAh g^?1 with an average discharge voltage of 3.30 V after 200 cycles. More crucially, while the pristine LXMO cycling cannot survive 90 cycles in a pouch full‐cell matched with a commercial graphite anode and lean (2 g A^?1 h^?1) electrolyte, ASR‐LXMO shows high capacity retention of 76% after 125 cycles in full‐cell cycling.     

Na‐Ion Intercalation and Charge Storage Mechanism in 2D Vanadium Carbide

2D vanadium carbide MXene containing surface functional groups (denoted as V₂CT_x , where T_x are surface functional groups) is synthesized and studied as anode material for Na‐ion batteries. V₂CT_x anode exhibits reversible charge storage with good cycling stability and high rate capability through electrochemical test. The charge storage mechanism of V₂CT_x material during Na⁺ intercalation/deintercalation and the redox reaction of vanadium are studied using a combination of synchrotron based X‐ray diffraction, hard X‐ray absorption near edge spectroscopy (XANES), and soft X‐ray absorption spectroscopy (sXAS). Experimental evidence of a major contribution of redox reaction of vanadium to the charge storage and the reversible capacity of V₂CT_x during sodiation/desodiation process are provided through V K ‐edge XANES and V L _2,3‐edge sXAS results. A correlation between the CO₃^2? content and the Na⁺ intercalation/deintercalation states in the V₂CT_x electrode observed from C and O K ‐edge in sXAS results implies that some additional charge storage reactions may take place between the Na⁺‐intercalated V₂CT_x and the carbonate‐based nonaqueous electrolyte. The results of this study provide valuable information for the further studies on V₂CT_x as anode material for Na‐ion batteries and capacitors.     

High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases

The lithium (Li) metal battery (LMB) is one of the most promising candidates for next‐generation energy storage systems. However, it is still a significant challenge to operate LMBs with high voltage cathodes under high rate conditions. In this work, an LMB using a nickel‐rich layered cathode of LiNi_0.76Mn_0.14Co_0.10O₂ (NMC76) and an optimized electrolyte [0.6 m lithium bis(trifluoromethanesulfonyl)imide + 0.4 m lithium bis(oxalato)borate + 0.05 m LiPF₆ dissolved in ethylene carbonate and ethyl methyl carbonate (4:6 by weight)] demonstrates excellent stability at a high charge cutoff voltage of 4.5 V. Remarkably, these Li||NMC76 cells can deliver a high discharge capacity of >220 mA h g^?1 (846 W h kg^?1) and retain more than 80% capacity after 1000 cycles at high charge/discharge current rates of 2C/2C (1C = 200 mA g^?1). This excellent electrochemical performance can be attributed to the greatly enhanced structural/interfacial stability of both the Ni‐rich NMC76 cathode material and the Li metal anode using the optimized electrolyte.     

Reducing Capacity and Voltage Decay of Co‐Free Li1.2Ni0.2Mn0.6O2 as Positive Electrode Material for Lithium Batteries Employing an Ionic Liquid‐Based Electrolyte

Lithium‐rich layered oxides (LRLOs) exhibit specific capacities above 250 mAh g^?1, i.e., higher than any of the commercially employed lithium‐ion‐positive electrode materials. Such high capacities result in high specific energies, meeting the tough requirements for electric vehicle applications. However, LRLOs generally suffer from severe capacity and voltage fading, originating from undesired structural transformations during cycling. Herein, the eco‐friendly, cobalt‐free Li_1.2Ni_0.2Mn_0.6O₂ (LRNM), offering a specific energy above 800 Wh kg^?1 at 0.1 C, is investigated in combination with a lithium metal anode and a room temperature ionic liquid‐based electrolyte, i.e., lithium bis(trifluoromethanesulfonyl)imide and N‐butyl‐N‐methylpyrrolidinium bis(fluorosulfonyl)imide. As evidenced by electrochemical performance and high‐resolution transmission electron microscopy, X‐ray photoelectron spectroscopy, and online differential electrochemical mass spectrometry characterization, this electrolyte is capable of suppressing the structural transformation of the positive electrode material, resulting in enhanced cycling stability compared to conventional carbonate‐based electrolytes. Practically, the capacity and voltage fading are significantly limited to only 19% and 3% (i.e., lower than 0.2 mV per cycle), respectively, after 500 cycles. Finally, the beneficial effect of the ionic liquid‐based electrolyte is validated in lithium‐ion cells employing LRNM and Li₄Ti₅O₁₂. These cells achieve a promising capacity retention of 80% after 500 cycles at 1 C.     

Atomic Fe‐Doped MOF‐Derived Carbon Polyhedrons with High Active‐Center Density and Ultra‐High Performance toward PEM Fuel Cells

A metalorganic gaseous doping approach for constructing nitrogen‐doped carbon polyhedron catalysts embedded with single Fe atoms is reported. The resulting catalysts are characterized using scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, and X‐ray absorption spectroscopy; for the optimal sample, calculated densities of Fe–N_x sites and active N sites reach 1.75812 × 10¹³ and 1.93693 × 10¹⁴ sites cm^‐2, respectively. Its oxygen reduction reaction half‐wave potential (0.864 V) is 50 mV higher than that of 20 wt% Pt/C catalyst in an alkaline medium and comparable to the latter (0.78 V vs 0.84 V) in an acidic medium, along with outstanding durability. More importantly, when used as a hydrogen–oxygen polymer electrolyte membrane fuel cell (PEMFC) cathode catalyst with a catalyst loading as low as 1 mg cm^‐2 (compared with a conventional loading of 4 mg cm^‐2), it exhibits a current density of 1100 mA cm^‐2 at 0.6 V and 637 mA cm^‐2 at 0.7 V, with a power density of 775 mW cm^‐2, or 0.775 kW g^–1 of catalyst. In a hydrogen–air PEMFC, current density reaches 650 mA cm^‐2 at 0.6 V and 350 mA cm^‐2 at 0.7 V, and the maximum power density is 463 mW cm^‐2, which makes it a promising candidate for cathode catalyst toward high‐performance PEMFCs.     

Incorporating Solvate and Solid Electrolytes for All‐Solid‐State Li2S Batteries with High Capacity and Long Cycle Life

The development of all‐solid‐state lithium–sulfur batteries is hindered by the poor interfacial properties at solid electrolyte (SE)/electrode interfaces. The interface is modified by employing the highly concentrated solvate electrolyte, (MeCN)₂?LiTFSI:TTE, as an interlayer material at the electrolyte/electrode interfaces. The incorporation of an interlayer significantly improves the cycling performance of solid‐state Li₂S batteries compared to the bare counterpart, exhibiting a specific capacity of 760 mAh g^?1 at cycle 100 (330 mAh g^?1 for the bare cell). Electrochemical impedance spectroscopy shows that the interfacial resistance of the interlayer‐modified cell gradually decreases as a function of cycle number, while the impedance of the bare cell remains almost constant. Cross‐section scanning electron microscopy (SEM)/ energy dispersive X‐ray spectroscopy (EDS) measurements on the interlayer‐modified cell confirm the permeation of solvate into the cathode and the SE with electrochemical cycling, which is related to the decrease in cell impedance. In order to mimic the full permeation of the solvate across the entire cell, the solvate is directly mixed with the SE to form a “solvSEM” electrolyte. The hybrid Li₂S cell using a solvSEM electrolyte exhibits superior cycling performance compared to the solid‐state cells, in terms of Li₂S loading, Li₂S utilization, and cycling stability. The improved performance is due to the favorable ionic contact at the battery interfaces.     

Development of Safe and Sustainable Dual‐Ion Batteries Through Hybrid Aqueous/Nonaqueous Electrolytes

In this study, a new dual‐ion battery (DIB) concept based on an aqueous/non‐aqueous electrolyte is reported, combining high safety in the form of a nonflammable water‐in‐salt electrolyte, a high cathodic stability by forming a protective interphase on the negative electrode (non‐aqueous solvent), and improved sustainability by using a graphite‐based positive electrode material. Far beyond the anodic stability limit of water, the formation of a stage‐2 acceptor‐type graphite intercalation compound (GIC) of bis(trifluoromethanesulfonyl) imide (TFSI) anions from an aqueous‐based electrolyte is achieved for the first time, as confirmed by ex‐situ X‐ray diffraction. The choice of negative electrode material shows a huge impact on the performance of the DIB cell chemistry, i.e., discharge capacities up to 40 mAh g^?1 are achieved even at a high specific current of 200 mA g^?1. In particular, lithium titanium phosphate (LiTi₂(PO₄)₃; LTP) and lithium titanium oxide (Li₄Ti₅O₁₂; LTO) are evaluated as negative electrodes, exhibiting specific advantages for this DIB setup. In this work, a new DIB storage concept combining an environmentally friendly, transition‐metal‐free, abundant graphite positive electrode material, and a nonflammable water‐based electrolyte is established, thus paving the path toward a sustainable and safe alternative energy storage technology.     

Understanding Film Formation Morphology and Orientation in High Member 2D Ruddlesden–Popper Perovskites for High‐Efficiency Solar Cells

2D Ruddlesden–Popper (RP) perovskites have recently emerged as promising candidates for hybrid perovskite photovoltaic cells, realizing power‐conversion efficiencies (PCEs) of over 10% with technologically relevant stability. To achieve solar cell performance comparable to the state‐of‐the‐art 3D perovskite cells, it is highly desirable to increase the conductivity and lower the optical bandgap for enhanced near‐IR region absorption by increasing the perovskite slab thickness. Here, the use of the 2D higher member (n = 5) RP perovskite (n‐butyl‐NH₃)₂(MeNH₃)₄Pb₅I₁₆ in depositing highly oriented thin films from dimethylformamide/dimethylsulfoxide mixtures using the hot‐casting method is reported. In addition, they exhibit superior environmental stability over thin films of their 3D counterpart. These films are assembled into high‐efficiency solar cells with an open‐circuit voltage of ≈1 V and PCE of up to 10%. This is achieved by fine‐tuning the solvent ratio, crystal growth orientation, and grain size in the thin films. The enhanced performance of the optimized devices is ascribed to the growth of micrometer‐sized grains as opposed to more typically obtained nanometer grain size and highly crystalline, densely packed microstructures with the majority of the inorganic slabs preferentially aligned out of plane to the substrate, as confirmed by X‐ray diffraction and grazing‐incidence wide‐angle X‐ray scattering mapping.     

High‐Performance Platinum‐Perovskite Composite Bifunctional Oxygen Electrocatalyst for Rechargeable Zn–Air Battery

Constructing highly active electrocatalysts with superior stability at low cost is a must, and vital for the large‐scale application of rechargeable Zn–air batteries. Herein, a series of bifunctional composites with excellent electrochemical activity and durability based on platinum with the perovskite Sr(Co_0.8Fe_0.2)_0.95P_0.05O_3?δ (SCFP) are synthesized via a facile but effective strategy. The optimal sample Pt‐SCFP/C‐12 exhibits outstanding bifunctional activity for the oxygen reduction reaction and oxygen evolution reaction with a potential difference of 0.73 V. Remarkably, the Zn–air battery based on this catalyst shows an initial discharge and charge potential of 1.25 and 2.02 V at 5 mA cm^?2, accompanied by an excellent cycling stability. X‐ray photoelectron spectroscopy, X‐ray absorption near‐edge structure, and extended X‐ray absorption fine structure experiments demonstrate that the superior performance is due to the strong electronic interaction between Pt and SCFP that arises as a result of the rapid electron transfer via the Pt? O? Co bonds as well as the higher concentration of surface oxygen vacancies. Meanwhile, the spillover effect between Pt and SCFP also can increase more active sites via lowering energy barrier and change the rate‐determining step on the catalysts surface. Undoubtedly, this work provides an efficient approach for developing low‐cost and highly active catalysts for wider application of electrochemical energy devices.     

Improving Electrochemical Stability and Low‐Temperature Performance with Water/Acetonitrile Hybrid Electrolytes

Although the “water‐in‐salt” electrolyte has significantly expanded the electrochemical stability window of aqueous electrolytes from 1.23 to 3 V, its inevitable hydrogen evolution under 1.9 V versus Li⁺/Li prevents the practical use of many energy‐dense anodes. Meanwhile, its liquidus temperature at 17 °C restricts its application below ambient temperatures. An advanced hybrid electrolyte is proposed in this work by introducing acetonitrile (AN) as co‐solvent, which minimizes the presence of interfacial water at the negatively charged electrode surface, and generates a thin and uniform interphase consisting of an organic outer layer based on nitrile (C?N) and sulfamide (R‐S‐N‐S) species and an inner layer rich in LiF. Such an interphase significantly suppresses water reduction and expands the electrochemical stability window to an unprecedented width of 4.5 V. Thanks to the low freezing point (?48 °C) and low viscosity of AN, the hybrid electrolyte is highly conductive in a wide temperature range, and enables a LiMn₂O₄/Li₄Ti₅O₁₂ full cell at both ambient and sub‐ambient temperatures with excellent cycling stability and rate capability. Meanwhile, such a hybrid electrolyte also inherits the nonflammable nature of aqueous electrolyte. The well‐balanced merits of the developed electrolyte make it suitable for high energy density aqueous batteries.     

Non-Sacrificial Additive Enables a Non-Passivating Cathode Interface for 4.6 V Li||LiCoO2 Batteries

Various electrolyte additives are developed to construct a cathode electrolyte interphase (CEI) layer for high-voltage LiCoO₂ since the cathode suffers severe interfacial degradation when increasing the cut-off voltage over 4.55 V. However, the CEI derived from the additive sacrificial reaction faces the risk of rupture due to the corrosion reaction and the volumetric variation of the cathode. Herein, a non-passivating cathode interface is realized for 4.6 V LiCoO₂ with a non-sacrificial electrolyte additive (TBAClO₄) by regulating the solvent environment at the interface rather than the preferential decomposition for CEI formation. Owing to the novel protection mechanism, the cell performance shows little dependence on the CEI-formation process. Therefore, an ultra-high initial coulombic efficiency (96.63%) and excellent cycling stability (81% capacity retention after 300 cycles) are achieved in Li||LiCoO₂ batteries. Moreover, even with the electrolyte containing 1000 ppm H₂O, the remarkable water capture ability of the additive together with its interfacial regulation enables the 4.6 V Li||LiCoO₂ battery to retain 80% capacity after 200 cycles. This non-sacrificial strategy provides new insights into high-voltage electrolyte additive design for high-energy-density lithium metal batteries.     

8.9% Single‐Stack Inverted Polymer Solar Cells with Electron‐Rich Polymer Nanolayer‐Modified Inorganic Electron‐Collecting Buffer Layers

Enhanced power conversion efficiency (PCE) is reported in inverted polymer solar cells when an electron‐rich polymer nanolayer (poly(ethyleneimine) (PEI)) is placed on the surface of an electron‐collecting buffer layer (ZnO). The active layer is made with bulk heterojunction films of poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]] (PTB7) and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM). The thickness of the PEI nanolayer is controlled to be 2 nm to minimize its insulating effect, which is confirmed by X‐ray photoelectron spectroscopy and optical absorption measurements. The Kelvin probe and ultraviolet photoelectron spectroscopy measurements demonstrate that the enhanced PCE by introducing the PEI nanolayer is attributed to the lowered conduction band energy of the ZnO layer via the formation of an interfacial dipole layer at the interfaces between the ZnO layer and the PEI nanolayer. The PEI nanolayer also improves the surface roughness of the ZnO layer so that the device series resistance can be noticeably decreased. As a result, all solar cell parameters including short circuit current density, open circuit voltage, fill factor, and shunt resistance are improved, leading to the PCE increase up to ≈8.9%, which is close to the best PCE reported using conjugated polymer electrolyte films.