The coupling of catalytically relevant conformational fluctuations in subtilisin BPN' to solution viscosity revealed by hydrogen isotope exchange and inhibitor binding

We have measured the tritium outexchange of subtilisin BPN'. A consistent and rather small group of hydrogens was isolated by their sensitivity to inhibitor binding. The viscosity dependence of exchange from these inhibitor protected hydrogens was then examined in 0.05 M MES buffer, pH 6.5 and 10 degrees C. The viscosity of the reaction medium was varied by added glycerol and ethylene glycol. The exchange rates were corrected to be compared at identical hydroxyl ion and water activity. The salient observation is the strikingly similar viscosity coupling behavior when compared to the deacylation step of ester hydrolysis catalyzed by the same enzyme (Ng and Rosenberg, Biophysical Chemistry, 39 (1991) 57). We have obtained a viscosity coupling constant of 0.68 -/+ 0.18 for hydrogen exchange in glycerol (cf. 0.65 -/+ 0.11 for deacylation in glycerol, sucrose, glucose and fructose); 1.67 -/+ 0.07 for outexchange (cf. 1.92 -/+ 0.09 for deacylation), in the presence of ethylene glycol. The two reactions are very chemically dissimilar, yet they show very similar viscosity coupling behavior. This together with the well established role of structural fluctuations in hydrogen exchange implies a similar role of structural fluctuations in the deacylation step of subtilisin BPN' catalyzed ester hydrolysis.     

Contribution of water to free energy of hydrolysis of pyrophosphate

The energy of hydrolysis of phosphate compounds varies depending on whether they are in solution or bound to the catalytic site of enzymes. With the purpose of simulating the conditions at the catalytic site, the observed equilibrium constant for pyrophosphate hydrolysis (Kobsd) was measured in aqueous mixtures of dimethyl sulfoxide, ethylene glycol, or polymers of ethylene glycol. The reaction was catalyzed by yeast inorganic pyrophosphatase at 30 degrees C. All the cosolvents used promoted a decrease of Kobsd. Polymers of ethylene glycol were more effective than dimethyl sulfoxide or ethylene glycol in decreasing Kobsd. The higher the molecular weight of the polymer, the lower the value of Kobsd. A decrease in Kobsd from 346 M (delta G degree obsd = -3.5 kcal mol-1) to 0.1 M (delta G degree obsd = 1.3 kcal mol-1) was observed after the addition of 50% (w/v) poly(ethylene glycol) 8000 to a solution containing 0.9 mM MgCl2 and 1 mM Pi at pH 8.0. The association constants of Pi and pyrophosphate for H+ and Mg2+ were measured in presence of different ethylene glycol concentrations in order to calculate the Keq for hydrolysis of different ionic species of pyrophosphate. A decrease in all the Keq was observed. The results are interpreted according to the concept that the energy of hydrolysis of phosphate compounds depends on the different solvation energies of reactants and products.     

Mechanism of Carboxypeptidase Y Catalyzed Hydrolysis and Aminolysis Reactions

The reaction mechanism of carboxypeptidase Y catalyzed reactions is investigated. Presteady state and steady state kinetic measurements are performed on the hydrolysis and aminolysis of an ester and an amide substrate. It is found that deacylation is the rate determining step in hydrolysis of the ester, pivalic acid 4-nitrophenol and acylation in that of the amide, succinyl-L-alanyl-L-alalyl-L-propyl-L-phenylalanine 4-nitroanilide.

The kinetic effects observed in the presence of a nucleophile, L-valine amide, where aminolysis occurs in parallel to the hydrolysis reaction are analysed in details. The results are described satisfactorily by a reaction scheme which involves the binding of the added nucleophile, (i) to the free enzyme, resulting in a simple competitive effect, and (ii) to the acyl-enzyme with the formation of a complex between the enzyme and the aminolysis product, the dissociation of which is rate determining. That scheme can account for both increases and decreases of kinetic parameter values as a function of the nucleophile concentration. There is no indication of binding of the nucleophile to the enzyme-substrate complex before acylation takes place.     

Steady-state and pre-steady-state kinetic evaluation of severe acute respiratory syndrome coronavirus (SARS-CoV) 3CLpro cysteine protease: development of an ion-pair model for catalysis

Severe acute respiratory syndrome (SARS) was a worldwide epidemic caused by a coronavirus that has a cysteine protease (3CLpro) essential to its life cycle. Steady-state and pre-steady-state kinetic methods were used with highly active 3CLpro to characterize the reaction mechanism. We show that 3CLpro has mechanistic features common and disparate to the archetypical proteases papain and chymotrypsin. The kinetic mechanism for 3CLpro-mediated ester hydrolysis, including the individual rate constants, is consistent with a simple double displacement mechanism. The pre-steady-state burst rate was independent of ester substrate concentration indicating a high commitment to catalysis. When homologous peptidic amide and ester substrates were compared, a series of interesting observations emerged. Despite a 2000-fold difference in nonenzymatic reactivity, highly related amide and ester substrates were found to have similar kinetic parameters in both the steady-state and pre-steady-state. Steady-state solvent isotope effect (SIE) studies showed an inverse SIE for the amide but not ester substrates. Evaluation of the SIE in the pre-steady-state revealed normal SIEs for both amide and ester burst rates. Proton inventory (PI) studies on amide peptide hydrolysis were consistent with two proton-transfer reactions in the transition state while the ester data was consistent with a single proton-transfer reaction. Finally, the pH-inactivation profile of 3CLpro with iodoacetamide is indicative of an ion-pair mechanism. Taken together, the data are consistent with a 3CLpro mechanism that utilizes an "electrostatic" trigger to initiate the acylation reaction, a cysteine-histidine catalytic dyad ion pair, an enzyme-facilitated release of P1, and a general base-catalyzed deacylation reaction.     

Kinetically controlled synthesis of ampicillin with immobilized penicillin acylase in the presence of organic cosolvents

Penicillin acylase (PA) is used in the industrial production of 6-amino penicillanic acid (6-APA). However, by proper control of reaction medium, the enzyme can be used in the reverse synthesis of β-lactam antibiotics from the corresponding β-lactam nuclei and suitable acyl donors. Under thermodynamically controlled strategy, the use of organic cosolvents can favor synthesis over hydrolysis by lowering water activity and favoring the non-ionic reactive species. Under kinetically controlled strategy using activated acyl donors, organic solvents can favor synthesis by depressing hydrolytic reactions. Results are presented on the synthesis of ampicillin from phenylglycine methyl ester and 6-APA with immobilized Escherichia coli PA in the presence of organic cosolvents. Several solvents were tested in terms of enzyme stability and solubility of substrates. Ethylene glycol, glycerol, 1–2 propanediol and 1–3 butanediol were selected accordingly and ampicillin synthesis was performed in all of them. Best results in terms of yield and productivity were obtained with ethylene glycol, with which further studies were conducted. Variables studied were enzyme to limiting substrate ratio, acyl acceptor to acyl donor ratio, organic solvent concentration, pH and temperature. Experimental design based on a two-level fractional factorial design was conducted. pH was determined as the most sensitive variable and was further optimized. The best conditions for ampicillin synthesis in terms of productivity, within the range of values studied for those variables, were pH 7.4, 28°C, 36 U_S PA/mmol 6-APA, 3 mol PGME/mol 6-APA and 45 % (v/v) ethylene glycol concentration. Productivity was 7.66 mM ampicillin/h, which corresponds to a specific productivity of 7.02 μmol ampicillin/h U_S at 55 % yield. Productivity was lower than in buffer but product yield was higher because of the much lower relative hydrolysis rates.     

Reactions between dipeptidyl peptidase IV and diacyl hydroxylamines: mechanistic investigations

Kinetics of inactivation of dipeptidyl peptidase IV (DP IV, EC 3.4.14.5) by N-peptidyl-O-(4-nitrobenzoyl) hydroxylamines and their enzyme-catalyzed hydrolysis were followed using independent monitoring methods, all giving similar efficiency ratios of Kcat/Kinact. Different temperature dependences of the DP IV-inactivation and enzyme-catalyzed hydrolysis provide evidence of independent rate determining steps for both reactions. Activation parameters of inactivation are similar to those of spontaneous decomposition of the compounds, suggesting a mechanistic relationship. Investigation of DP IV-inactivation, DP IV-catalyzed hydrolysis of N-Ala-Pro-O-Bz(4-NO2) and the decomposition of the suicide substrate in H2O and D2O gave solvent isotope effects of 4.65, 2.54 and 1.02, respectively. A proton inventory of the inactivation reaction indicates involvement of more than one proton in the formation or breakdown of its transition state. The linear proton inventory found for the hydrolytic reaction is consistent with one proton transition in the rate determining step and resembles the rate limiting deacylation of Ala-Pro-DP IV. The hypothetical reaction model now locates splitting in both reactions prior to formation of a covalent intermediate during the catalytic cycle.     

Comparison of the kinetics and mechanism of the papain-catalyzed hydrolysis of esters and thiono esters

The kinetic constants for the papain-catalyzed hydrolysis of the methyl thiono esters of N-benzoylglycine and N-(beta-phenylpropionyl)glycine are compared with those for the corresponding methyl ester substrates. The k2/Ks values for the thiono esters are 2-3 times higher than those for the esters, and both show bell-shaped pH dependencies with similar pKa's (approximately 4 and 9). The k3 values for the thiono esters are 30-60 times less than those for the esters and do not exhibit a pH dependency. Solvent deuterium isotope effects on k2/Ks and k3 were measured for the ester and thiono ester substrates of both glycine derivatives. Each thiono ester substrate showed an isotope effect similar to that for the corresponding ester substrate. Moreover, use of the proton inventory technique indicated that, as for esters, one proton is transferred in the transition state for deacylation during reactions involving thiono esters and the degree of heavy atom reorganization in the transition state is very similar in both cases. The k3 values for the hydrolysis of a series of para-substituted N-benzoylglycine esters were found to correlate with the k3 values for the corresponding para-substituted thiono esters [Carey, P. R., Lee, H., Ozaki, Y., & Storer, A. C. (1984) J. Am. Chem. Soc. 106, 8258-8262], showing that the rate-determining step for the deacylation of both thiolacyl and dithioacyl enzymes probably involves the disruption of a contact between the substrate's glycinic nitrogen atom and the sulfur of cysteine-25. It is concluded that the hydrolysis of esters and thiono esters proceeds by essentially the same reaction pathway. Due to an oxygen-sulfur exchange process the product released in the case of the N-(beta-phenylpropionyl)glycine thiono ester substrate is the dioxygen acid; however, for the N-benzoylglycine thiono ester substrate, the thiol acid is the initial product. This thiol acid then acts as a substrate for papain and reacylates the enzyme to eventually give the dioxygen acid product. It is shown that thiol acids are excellent substrates for papain.     

Viscosity and transient solvent accessibility of Trp-63 in the native conformation of lysozyme

We have measured the rates of isotope exchange at the nitrogen of the indole ring of Trp-63 of lysozyme and of L-tryptophan as a function of solution viscosity. We have used two cosolvents, glycerol and ethylene glycol, to modify the relative viscosity. We have derived the appropriate kinetic equations for the alternative possibilities that the exchange takes place either in solution or in the intact protein matrix. Because we chose to study the proton-catalyzed exchange reaction, the rate of it is not expected to be diffusion-limited. We confirmed this by measuring the exchange from tryptophan. These results and the known effects of glycerol and ethylene glycol on the solvation of indole allow us to predict that if the exchange reaction takes place in a protein matrix the effects of the two cosolvents when compared under isoviscous conditions should be identical. This is what we find for Trp-63 in lysozyme at 15, 20 and 26 degrees C. The slope of the linear plot of log k vs. log relative viscosity is 0.6. This strongly supports a model for conformational fluctuations where transient solvation takes place without major changes in protein folding. The most interesting feature of our findings is the fact that a slow reaction admittedly not diffusion-limited shows, when taking place in a protein matrix, a linear dependence on solution viscosity. We suggest that what we observe is the effect of damping of movement of the side chain expressed as a change in the friction along the reaction coordinate in the corresponding phase space. The presence of such effects stresses the validity and usefulness of Kramers model of rate processes for reactions taking place in a protein matrix. Such behavior is predicted by several of the recently proposed general mechanisms of enzyme catalysis.     

The effect of viscosity on the accessibility of the single tryptophan in human serum albumin.

When reactions take place with one of the reactants tied to protein matrix, movements along the reaction coordinate towards the transition state can become coupled to structural fluctuations of the protein matrix. This investigation aims to test the assumptions underlying the arguments supporting such a coupling. A coupling is allowed only if the activation barrier is high and broad enough as shown to be the case for the proton catalyzed isotope exchange at Trp-63 of lysozyme. In the present investigation the activation barrier for the same reaction has been lowered radically in an effort to show that the coupling, as measured by the dependence of rate on solution viscosity, will diminish and ideally vanish, despite the unchanged effects of cosolvents on the chemical activities of all the reactants. The isotope exchange rate at the indole nitrogen of the single tryptophan residue of human serum albumin was measured with UV. This residue is rigidly held to the protein surface and the solvent access, although restricted, corresponds to a partially exposed residue. As a consequence, the isotope exchange rates and the bimolecular quenching rate of fluorescence by acrylamide, also measured, are high. The experiments were carried out at pH 5.2 where the molecule is in the N-form and the exchange is catalyzed by OH- ions. The activation energy of the hydroxyl catalyzed reaction is 22 kJ lower than for the proton catalyzed process. Under these conditions the exchange rate is viscosity independent both in the case of glycerol and in ethylene glycol.(ABSTRACT TRUNCATED AT 250 WORDS)     

Isothermal titration calorimetry determination of individual rate constants of trypsin catalytic activity

Determination of individual rate constants for enzyme-catalyzed reactions is central to the understanding of their mechanism of action and is commonly obtained by stopped-flow kinetic experiments. However, most natural substrates either do not fluoresce/absorb or lack a significant change in their spectra while reacting and, therefore, are frequently chemically modified to render adequate molecules for their spectroscopic detection. Here, isothermal titration calorimetry (ITC) was used to obtain Michaelis–Menten plots for the trypsin-catalyzed hydrolysis of several substrates at different temperatures (278–318 K): four spectrophotometrically blind lysine and arginine N-free esters, one N-substituted arginine ester, and one amide. A global fitting of these data provided the individual rate constants and activation energies for the acylation and deacylation reactions, and the ratio of the formation and dissociation rates of the enzyme–substrate complex, leading also to the corresponding free energies of activation. The results indicate that for lysine and arginine N-free esters deacylation is the rate-limiting step, but for the N-substituted ester and the amide acylation is the slowest step. It is shown that ITC is able to produce quality kinetic data and is particularly well suited for those enzymatic reactions that cannot be measured by absorption or fluorescence spectroscopy.     

Acceleration of enzymatic reaction of trypsin through the formation of water-soluble complexes with poly(ethylene glycol)-block-poly(alpha,beta-aspartic acid)

The amidase activity of bovine pancreas trypsin in water-soluble complexes with poly(ethylene glycol)-block-poly(alpha,beta-aspartic acid) (PEG-PAA) was evaluated by a colorimetric assay using L-lysine p-nitroanilide as a substrate. The enzymatic reaction of trypsin was accelerated through the complexation with PEG-PAA. By determining the kinetic parameters of the enzymatic reaction of trypsin, it was confirmed that the catalytic rate constant of the complexed trypsin was 15 times higher than that of the native trypsin. From the evaluation of pH dependence of initial reaction rate, it was indicated that this acceleration was induced by a stabilization of the imidazolium ion of the His residue in the catalytic site, the Asp-His-Ser triad, of trypsin due to the Asp units of PEG-PAA. The hydrogen bonded Asp-His pairs are critical constituents in several key enzymatic reactions including serine protease and apurinic endonucleases, and it was expected that the acceleration of the catalytic reaction might occur for other enzymes by the formation of water-soluble complexes with PEG-PAA.     

A rate-limiting step of enteropeptidase hydrolysis

It has been shown for the first time that deacylation is the rate-limiting step in the enteropeptidase-catalyzed hydrolysis of highly effective oligopeptide substrates containing four Asp residues in positions P2–P5. On the other hand, the rate-limiting step in the hydrolysis of low-efficiency peptide substrates containing less than four Asp or Glu residues in positions P2–P5 is acylation, as it has previously been suggested for all amide and peptide substrates of serine proteases on the basis of classical works of Bender et al. The method of introduction of an additional nucleophile or another effector that selectively affects the deacylation step was used to determine the rate-limiting step in the enteropeptidase hydrolysis of N ^α-benzyloxycarbonyl-L-lysine thiobenzyl ester, the highly efficient amide substrate GlyAsp₄-Lys β-naphthyl amide, and the low-efficiency peptide substrate VLSAADK-GNVKAAWG (where a hyphen denotes the hydrolysis site).     

Synthesis of oligo(poly(ethylene glycol) fumarate)

This protocol describes the synthesis of oligo(poly(ethylene glycol) fumarate) (OPF; 1-35 kDa; a polymer useful for tissue engineering applications) by a one-pot reaction of poly(ethylene glycol) (PEG) and fumaryl chloride. The procedure involves three parts: dichloromethane and PEG are first dried; the reaction step follows, in which fumaryl chloride and triethylamine are added dropwise to a solution of PEG in dichloromethane; and finally, the product solution is filtered to remove by-product salt, and the OPF product is twice crystallized, washed and dried under vacuum. The reaction is affected by the molecular weight of PEG and reactant molar ratio. The OPF product is cross-linked by radical polymerization by either a thermally induced or ultraviolet-induced radical initiator, and the physical properties of the OPF oligomer and resulting cross-linked hydrogel are easily tailored by varying PEG molecular weight. OPF hydrogels are injectable, they polymerize in situ and they undergo biodegradation by hydrolysis of ester bonds. The expected time required to complete this protocol is 6 d.     

The effect of side chain structure of ester substrates in determining the rate-controlling step in alpha-chymotrypsin-catalyzed hydrolysis

Presteady state and steady state analyses of the alpha-chymotrypsin [EC 3.4.21.1]-catalyzed hydrolysis of three specific ester substrates and three ring-substituted derivatives were carried out to elucidate the effect of hydrophobic interactions due to the different side chains of the substrates on the individual steps of the reaction. Hydrolysis of all the substrates except for N alpha-acetyl-Nin-formyltryptophan methyl ester (Ac-Trp(CHO)-OMe) was controlled by the deacylation rate. In spite of their comparable Ks values, the substrates with small kcat, such as N alpha-acetyltryptophan methyl ester and N alpha-acetyl-2-(2-nitro-4-carboxyphenylsufenyl)-tryptophan methyl ester, characteristically gave Km values one order of magnitude smaller than the others. For the reaction of Ac-Trp(CHO)-OMe, it was ascertained that the deacylation step was not rate-controlling. It is suggested that the acylation step controls the rate in this case.     

Modeling and optimization of methanol as a cosolvent in Amoxicillin synthesis and its advantage over ethylene glycol

The production of semi-synthetic beta-lactam antibiotics such as Amoxicillin may be performed enzymatically using penicillin acylase under mild conditions. However, the thermodynamically favored hydrolysis of the antibiotic product and the acyl donor substrate needs to be minimized to use the kinetically controlled route. The addition of cosolvents such as ethylene glycol and methanol (the two best solvents identified so far for semi-synthetic beta-lactam antibiotics) can achieve this to some degree, but these additives also produce enzyme inhibition and deactivation. In this study, we compared ethylene glycol and methanol under various substrate conditions. Methanol gave a better synthesis to hydrolysis ratio, although its deactivating effects adversely affected production at lower cosolvent concentrations than ethylene glycol. This effect and its dependence on substrate concentration was further modeled and optimized. A few targets of optimization such as Amoxicllin level, the synthesis to hydrolysis ratio, or a combination, were employed. While maximum levels of Amoxicillin synthesis were achievable only at high substrate concentrations, improvements derived from cosolvents were most significant at low substrate concentrations.     

Kinetics of the lactate dehydrogenase reaction in high-viscosity media

The effect of the medium viscosity on kinetics parameters of lactate dehydrogenase reaction was studied. The viscosity increase results in a sharp decline in the catalytic rate for both the pyruvate reduction and lactate oxidation reactions. It is shown that the catalytic step and its associated conformational motions is the only step which is considerably retarded when the viscosity increases. The reaction is not sensitive to changes in the dielectric properties of the medium. An inverse power function observed between the rate constant and viscosity cannot be explained by the theory of absolute reaction rates. However, it can easily be interpreted on the basis of the Kramers theory dealing with the transition over the activation barrier as a diffusional motion in the field of random forces. The influence of the medium's viscosity on the kinetic parameters indicates the existence of strong coupling between the dynamics of the solvent and the conformational motions of the protein molecule, which are correlated with the catalytic step.     

The pH dependence of serpin-proteinase complex dissociation reveals a mechanism of complex stabilization involving inactive and active conformational states of the proteinase which are perturbable by calcium

Serpin family protein proteinase inhibitors trap proteinases at the acyl-intermediate stage of cleavage of the serpin as a proteinase substrate by undergoing a dramatic conformational change, which is thought to distort the proteinase active site and slow deacylation. To investigate the extent to which proteinase catalytic function is defective in the serpin-proteinase complex, we compared the pH dependence of dissociation of several serpin-proteinase acyl-complexes with that of normal guanidinobenzoyl-proteinase acyl-intermediate complexes. Whereas the apparent rate constant for dissociation of guanidinobenzoyl-proteinase complexes (k(diss, app)) showed a pH dependence characteristic of His-57 catalysis of complex deacylation, the pH dependence of k(diss, app) for the serpin-proteinase complexes showed no evidence for His-57 involvement in complex deacylation and was instead characteristic of a hydroxide-mediated deacylation similar to that observed for the hydrolysis of tosylarginine methyl ester. Hydroxylamine enhanced the rate of serpin-proteinase complex dissociation but with a rate constant for nucleophilic attack on the acyl bond several orders of magnitude slower than that of hydroxide, implying limited accessibility of the acyl bond in the complex. The addition of 10-100 mm Ca(2+) ions stimulated up to 80-fold the dissociation rate constant of several serpin-trypsin complexes in a saturable manner at neutral pH and altered the pH dependence to a pattern characteristic of His-57-catalyzed complex deacylation. These results support a mechanism of kinetic stabilization of serpin-proteinase complexes wherein the complex is trapped as an acyl-intermediate by a serpin conformational change-induced inactivation of the proteinase catalytic function, but suggest that the inactive proteinase conformation in the complex is in equilibrium with an active proteinase conformation that can be stabilized by the preferential binding of an allosteric ligand such as Ca(2+).     

Preparation and kinetic properties of 5-ethylphenazine-poly(ethylene glycol)-NAD+ conjugate, a unique catalyst having an intramolecular reaction step

5-Ethylphenazine-poly(ethylene glycol)-NAD+ conjugate (EP+-PEG-NAD+) was prepared by linking 1-(3-carboxypropyloxy)-5-ethylphenazine (I) to poly(ethylene glycol)-bound NAD+ (PEG-NAD+) and its kinetic properties were studied. As a reference compound, poly(ethylene glycol)-bound 5-ethylphenazine derivative (III) was also prepared and the effects of poly(ethylene glycol) on the reaction rate of the 5-ethylphenazine moiety with NADH was investigated. The second-order rate constant, k1, of the reaction of III with NADH is 2.78 mM-1 s-1 and is about 1.7 times that of 1-(3-ethoxycarbonylpropyloxy)-5-ethylphenazine (II) with NADH. A similar effect of the attached poly(ethylene glycol) was observed for the reaction of PEG-NADH with I or II. The second-order rate constants, k2 and k3, of the reactions of the reduced form of III with oxygen and with 3-(4',5'-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium ion, respectively, were k2 = 1.22 mM-1 s-1 and k3 = 32 mM-1 s-1; the k2 value is not changed but the k3 value is decreased by the attachment of the polymer. EP+-PEG-NAD+ works as a unique catalyst having an intramolecular reaction step within its turnover cycle in a coupled multi-step reaction system containing malate dehydrogenase, malate, EP+-PEG-NAD+, a tetrazolium salt and oxygen. The first-order rate constant, k4, of the intramolecular reaction was 1.1 s-1. The effects of the covalent linking of the 5-ethylphenazine and the NAD+ moieties were estimated by comparing the value of k4 with that of k1 for the reaction of III with NADH; the effective concentration of the NADH moiety for the 5-ethylphenazine moiety on the same EP+-PEG-NADH molecule (or vice versa) was calculated to be 0.40 mM from the ratio of k4/k1. The values of the rate constants in the coupled multi-step reaction system enable us to understand the dynamic features of the system and the characteristics of EP+-PEG-NAD+ as a catalyst are discussed.     

Catalysis by human leukocyte elastase: proton inventory as a mechanistic probe

Proton inventories (rate measurements in mixtures of H2O and D2O) were determined for the human leukocyte elastase catalyzed hydrolyses of thiobenzyl esters and p-nitroanilides of the peptides MeOSuc-Val, MeOSuc-Alan-Pro-Val (n = 0-2), and MeOSuc-Alan-Pro-Ala (n = 1 or 2). The dependencies of k2/Ks on mole fraction of solvent deuterium for the p-nitroanilides are "dome-shaped" and were fit to a model that incorporates the mechanistic features of generalized solvent reorganization when substrate binds to enzyme and partial rate limitation of k2/Ks by physical and chemical steps [Stein, R. L. (1985) J. Am. Chem. Soc. 107, 7768-7769]. The proton inventories for the deacylation of MeOSuc-Val-HLE and MeOSuc-Pro-Val-HLE are linear while those for the deacylation of MeOSuc-Ala-Pro-Val-HLE and MeOSuc-Ala-Ala-Pro-Val-HLE are "bowl-shaped" and could be fit to a quadratic dependence of rate on mole fraction of deuterium. These results are interpreted to suggest that the correct operation of the catalytic triad is dependent on substrate structure. Minimal substrates, which cannot interact with elastase at remote subsites, are hydrolyzed via a mechanism involving simple general-base catalysis by the active site histidine and transfer of a single proton in the rate-limiting transition state. In contrast, tri- and tetrapeptide substrates, which are able to interact at remote subsites, are hydrolyzed by a more complex mechanism of protolytic catalysis involving full functioning of the catalytic triad and transfer of two protons in the rate-limiting transition state. Finally, the proton inventories for the deacylation of MeOSuc-Ala-Pro-Ala-HLE and MeOSuc-Ala-Ala-Pro-Ala-HLE are dome-shaped and suggest that the chemical events of acyl-enzyme hydrolysis are only partially rate limiting for these reactions and that some other physical step is also partially rate limiting.     

Kinetics and specificity of serine proteases in peptide synthesis catalyzed in organic solvents

Initial rates of peptide-bond synthesis catalyzed by poly(ethylene glycol)-modified chymotrypsin in benzene were determined using high-performance liquid chromatography. Enzymatic synthesis of N-benzoyl-L-tyrosyl-L-phenylalanine amide from N-benzoyl-L-tyrosine ethyl ester and L-phenylalanine amide was found to obey Michaelis-Menten kinetics an to be consistent with a ping-pong mechanism modified by a hydrolytic branch. The catalytic activity of modified chymotrypsin was dependent on both water concentration and type of organic solvent, the highest synthesis rate being obtained in toluene. Since the chymotrypsin specificity in the organic phase was actually altered, the enzyme's apparent kinetic parameters were determined for different substrates and compared to those obtained with other serine proteases in benzene. Both N-benzoyl-L-tyrosine ethyl ester and N-alpha-benzoyl-L-lysine methyl ester were comparable acyl donors in benzene and the (kcat/Km)app value of modified chymotrypsin was only 10-fold smaller than that obtained with poly(ethylene glycol)-modified trypsin in the synthesis of N-alpha-benzoyl-L-lysyl-L-phenylalanine amide. The change in chymotrypsin specificity was also confirmed through the binding of trypsin inhibitors in benzene. The overall results suggest that hydrophobic bonding between the enzyme and its substrate should not be taken into account during catalysis in the organic phase. In general, if hydrophobic interactions are involved in the binding of substrates to the active site in aqueous media, the replacement of water by hydrophobic solvents will induce some change in enzyme specificity. Moreover, secondary residues of enzyme-binding sites may also exert a significant influence on specificity since, as observed in this study, chymotrypsin exhibited high affinity for cationic substrates and cationic inhibitors as well in apolar solvents.