Whole genome resequencing reveals natural target site preferences of transposable elements in Drosophila melanogaster

Transposable elements are mobile DNA sequences that integrate into host genomes using diverse mechanisms with varying degrees of target site specificity. While the target site preferences of some engineered transposable elements are well studied, the natural target preferences of most transposable elements are poorly characterized. Using population genomic resequencing data from 166 strains of Drosophila melanogaster, we identified over 8,000 new insertion sites not present in the reference genome sequence that we used to decode the natural target preferences of 22 families of transposable element in this species. We found that terminal inverted repeat transposon and long terminal repeat retrotransposon families present clade-specific target site duplications and target site sequence motifs. Additionally, we found that the sequence motifs at transposable element target sites are always palindromes that extend beyond the target site duplication. Our results demonstrate the utility of population genomics data for high-throughput inference of transposable element targeting preferences in the wild and establish general rules for terminal inverted repeat transposon and long terminal repeat retrotransposon target site selection in eukaryotic genomes.     

Nucleotide sequence analysis of the termini and chromosomal locus involved in site-specific integration of the streptococcal conjugative transposon Tn5252.

The 47-kb, broad-host-range, streptococcal conjugative transposon Tn5252 is capable of site-specific integration into the pneumococcal chromosome. We present the nucleotide sequence of the terminal regions of the transposon and its target site in the pneumococcal genome. No inverted repeats were found at the termini of the transposon. A 72-bp region of the target was present on either side following the insertion of Tn5252 and appeared to serve as a signal for its integration and excision. The data suggest that the left copy of the 72-bp segment was a part of the conjugative element, the crossover point of integration was nonrandom within this region, and the mechanism of insertion could resemble that of the site-specific temperate phages.     

Hop,an active Mutator-like element in the genome of the fungus Fusarium oxysporum

A new type of active DNA transposon has been identified in the genome of Fusarium oxysporum by its transposition into the niaD target gene. Two insertions within the final exon, in opposite orientations at the same nucleotide site, have been characterized. These elements, called Hop, are 3,299 bp long, with perfect terminal inverted repeats (TIRs) of 99 bp. The sequencing of genomic copies reveals a 9-bp target site duplication and no apparent sequence specificity at the insertion sites. The sequencing of a cDNA indicates that Hop does not contain an intron and encodes a putative transposase of 836 amino acids. The structural features (length, TIRs size, and 9-bp duplication), together with the presence of conserved domains in the transposase, strongly suggest that Hop is a Mutator-like element (MULE). Hop is thus the first active member of this family found beyond plants. The high rate of excision observed indicates that Hop is very active and thus represents a promising efficient tagging system for the isolation of fungal genes. The distribution of Hop elements within the Fusarium genus revealed that they are present in different species, suggesting that related elements could be present in other fungal genomes. In fact, Hop-related sequences have been identified in the survey of the entire genome sequence of three other ascomycetes, Magnaporthe grisea, Neurospora crassa, and Aspergillus fumigatus.     

The use of an improved transposon mutagenesis system for DNA sequencing leads to the characterization of a new insertion sequence of Streptomyces lividans 66

A DNA sequencing strategy was developed based on the tetracycline resistance transposon Tn1721. A universal M13 primer binding site (UP) for DNA sequencing and restriction sites for mapping were inserted near one end of Tn1721 and the new derivative, Tn5491, introduced onto a conjugative F' plasmid. The target sequence is inserted between two inverted resolution sites (res) of Tn1721 present on the high-copy plasmid pJOE2114. Due to the inviability of long palindromic sequences in Escherichia coli insertions between the inversely orientated res sites of pJOE2114 are positively selected. Transposition of Tn5491 into the target sequence is selected by cointegrate formation of Tn5491 during transposition, mating and transfer of the nonconjugative sequencing vector. After cointegrate resolution, the additional res sites in the vector result in a second site-specific recombination removing most of the transposon (except of 136 bp) and part of the target sequence. The reduced plasmid sizes and the use of the universal primer improved the quality of the sequencing results obtained on an automated fluorescent sequencer. A 3.35-kb EcoRI fragment from the 30-kb terminal inverted repeats (TIR) of the Streptomyces lividans chromosome was sequenced by this method. A 1304-bp sequence was found on this fragment with the features of insertion elements. The element called IS1372 had 27-bp IR and two potential open reading frames. The predicted gene products had similar sizes and high similarity to gene products encoded by insertion sequences of the IS3 family. Furthermore, a potential signal stimulating ribosomal shifts and typical for members of the IS3 family was identified. Five to seven copies of IS1372 were found in different strains of S. lividans but none in other Streptomyces species tested     

The Tc2 transposon of Caenorhabditis elegans has the structure of a self-regulated element.

We have analyzed the sequence of the Tc2 transposon of the nematode Caenorhabditis elegans. The Tc2 element is 2,074 bp in length and has perfect inverted terminal repeats of 24 bp. The structure of this element suggests that it may have the capacity to code for a transposase protein and/or for regulatory functions. Three large reading frames on one strand exhibit nonrandom codon usage and may represent exons. The first open coding region is preceded by a potential CAAT box, TATA box, and consensus heat shock sequence. In addition to its inverted terminal repeats, Tc2 has an unusual structural feature: subterminal degenerate direct repeats that are arranged in an irregular overlapping pattern. We have also examined the insertion sites of two Tc2 elements previously identified as the cause of restriction fragment length polymorphisms. Both insertions generated a target site duplication of 2 bp. One element had inserted inside the inverted terminal repeat of another transposon, splitting it into two unequal parts.     

Casposon integration shows strong target site preference and recapitulates protospacer integration by CRISPR-Cas systems

Casposons are a recently discovered group of large DNA transposons present in diverse bacterial and archaeal genomes. For integration into the host chromosome, casposons employ an endonuclease that is homologous to the Cas1 protein involved in protospacer integration by the CRISPR-Cas adaptive immune system. Here we describe the site-preference of integration by the Cas1 integrase (casposase) encoded by the casposon of the archaeon Aciduliprofundum boonei. Oligonucleotide duplexes derived from the terminal inverted repeats (TIR) of the A. boonei casposon as well as mini-casposons flanked by the TIR inserted preferentially at a site reconstituting the original A. boonei target site. As in the A. boonei genome, the insertion was accompanied by a 15-bp direct target site duplication (TSD). The minimal functional target consisted of the 15-bp TSD segment and the adjacent 18-bp sequence which comprises the 3′ end of the tRNA-Pro gene corresponding to the TΨC loop. The functional casposase target site bears clear resemblance to the leader sequence-repeat junction which is the target for protospacer integration catalyzed by the Cas1–Cas2 adaptation module of CRISPR-Cas. These findings reinforce the mechanistic similarities and evolutionary connection between the casposons and the adaptation module of the prokaryotic adaptive immunity systems.     

Scooter, a new active transposon in Schizophyllum commune, has disrupted two genes regulating signal transduction

Two copies of scooter, a DNA-mediated transposon in the basidiomycetous fungus Schizophyllum commune, were characterized. Scooter is the first transposon isolated from S. commune. Scooter creates 8-bp target site duplications, comparable to members of the hAT superfamily, and has 32-bp terminal inverted repeats. Both copies of scooter are nonautonomous elements capable of movement. Southern blot hybridizations show that scooter-related sequences are present in all S. commune strains tested. Scooter-1 was identified initially as an insertion in the Bbeta2 pheromone receptor gene, bbr2, leading to a partial defect in mating. Scooter-2 spontaneously disrupted a gene to produce the frequently occurring morphological mutant phenotype known as thin. The scooter-2 insert permitted cloning of the disrupted gene, thn1, which encodes a putative regulator of G protein signaling (RGS) protein. Spontaneous insertion of scooter into genes with identifiable mutant phenotypes constitutes the first evidence of active transposition of a DNA-mediated transposon in a basidiomycete.     

Pot2, an inverted repeat transposon from the rice blast fungus Magnaporthe grisea

We report the cloning and characterisation of Pot2, a putative transposable element from Magnaporthe grisea. The element is 1857 by in size, has 43-bp perfect terminal inverted repeats (TIRs) and 16-bp direct repeats within the TIRs. A large open reading frame, potentially coding for a transposase-like protein, was identified. This putative protein coding region showed extensive identity to that of Fott, a transposable element from another phytopathogenic fungus, Fusarium oxysporum. Pot2, like the transposable elements Tc1 and Mariner of Caenorhabditis elegans and Drosophila, respectively, duplicates the dinucleotide TA at the target insertion site. Sequence analysis of DNA flanking 12 Pot2 elements revealed similarity to the consensus insertion sequence of Tct. Pot2 is present at a copy number of approximately 100 per haploid genome and represents one of the major repetitive DNAs shared by both rice and non-rice pathogens of M. grisea.     

The Bacteroides mobilizable transposon Tn4555 integrates by a site-specific recombination mechanism similar to that of the gram-positive bacterial element Tn916.

The Bacteroides mobilizable transposon Tn4555 is a 12.2-kb molecule that encodes resistance to cefoxitin. Conjugal transposition is hypothesized to occur via a circular intermediate and is stimulated by coresident tetracycline resistance elements and low levels of tetracycline. In this work, the ends of the transposon were identified and found to consist of 12-bp imperfect inverted repeats, with an extra base at one end. In the circular form, the ends were separated by a 6-bp "coupling sequence" which was associated with either the left or the right transposon terminus when the transposon was inserted into the chromosome. Tn4555 does not duplicate its target site upon insertion. Using a conjugation-based transposition assay, we showed that the coupling sequence originated from 6 bases of genomic DNA flanking either side of the transposon prior to excision. Tn4555 preferentially transposed into a 589-bp genomic locus containing a 207-bp direct repeat. Integration occurred before or after the repeated sequence, with one integration site between the two repeats. These observations are consistent with a transposition model based on site-specific recombination. In the bacteriophage lambda model for site-specific recombination, the bacteriophage recombines with the Escherichia coli chromosome via a 7-bp "crossover" region. We propose that the coupling sequence of Tn4555 is analogous in function to the crossover region of lambda but that unlike the situation in lambda, recombination occurs between regions of nonhomologous DNA. This ability to recombine into divergent target sites is also a feature of the gram-positive bacterial transposon Tn916.     

Mu Transposon Insertion Sites and Meiotic Recombination Events Co-Localize with Epigenetic Marks for Open Chromatin across the Maize Genome

The Mu transposon system of maize is highly active, with each of the ∼50–100 copies transposing on average once each generation. The approximately one dozen distinct Mu transposons contain highly similar ∼215 bp terminal inverted repeats (TIRs) and generate 9-bp target site duplications (TSDs) upon insertion. Using a novel genome walking strategy that uses these conserved TIRs as primer binding sites, Mu insertion sites were amplified from Mu stocks and sequenced via 454 technology. 94% of ∼965,000 reads carried Mu TIRs, demonstrating the specificity of this strategy. Among these TIRs, 21 novel Mu TIRs were discovered, revealing additional complexity of the Mu transposon system. The distribution of >40,000 non-redundant Mu insertion sites was strikingly non-uniform, such that rates increased in proportion to distance from the centromere. An identified putative Mu transposase binding consensus site does not explain this non-uniformity. An integrated genetic map containing more than 10,000 genetic markers was constructed and aligned to the sequence of the maize reference genome. Recombination rates (cM/Mb) are also strikingly non-uniform, with rates increasing in proportion to distance from the centromere. Mu insertion site frequencies are strongly correlated with recombination rates. Gene density does not fully explain the chromosomal distribution of Mu insertion and recombination sites, because pronounced preferences for the distal portion of chromosome are still observed even after accounting for gene density. The similarity of the distributions of Mu insertions and meiotic recombination sites suggests that common features, such as chromatin structure, are involved in site selection for both Mu insertion and meiotic recombination. The finding that Mu insertions and meiotic recombination sites both concentrate in genomic regions marked with epigenetic marks of open chromatin provides support for the hypothesis that open chromatin enhances rates of both Mu insertion and meiotic recombination.     

Gene conversion associated with site-specific recombination in yeast plasmid pSR1.

A circular DNA plasmid, pSR1, isolated from Zygosaccharomyces rouxii has a pair of inverted repeats consisting of completely homologous 959-base pair (bp) sequences. Intramolecular recombination occurs frequently at the inverted repeats in cells of Saccharomyces cerevisiae, as well as in Z. rouxii, and is catalyzed by a protein encoded by the R gene of its own genome. The recombination is, however, independent of the RAD52 gene of the host genome. A site for initiation of the intramolecular recombination in the S. cerevisiae host was delimited into, at most, a 58-bp region in the inverted repeats by using mutant plasmids created by linker insertion. The 58-bp region contains a pair with 14-bp dyad symmetry separated by a 3-bp spacer sequence. The recombination initiated at this site was accompanied by a high frequency of gene conversion (3 to 50% of the plasmid clones examined). Heterogeneity created by the linker insertion or by a deletion (at most 153 bp so far tested) at any place on the inverted repeats was converted to a homologous combination by the gene conversion, even in the rad52-1 mutant host. A mechanism implying branch migration coupled with DNA replication is discussed.     

Transposition in Shigella dysenteriae: isolation and analysis of IS911, a new member of the IS3 group of insertion sequences.

Twenty-nine clear-plaque mutants of bacteriophage lambda were isolated from a Shigella dysenteriae lysogen. Three were associated with insertions in the cI gene: two were due to insertion of IS600, and the third resulted from insertion of a new element, IS911. IS911 is 1,250 base pairs (bp) long, carries 27-bp imperfect terminal inverted repeats, and generates 3-bp duplications of the target DNA on insertion. It was found in various copy numbers in all four species of Shigella tested and in Escherichia coli K-12 but not in E. coli W. Analysis of IS911-mediated cointegrate molecules indicated that the majority were generated without duplication of IS911. They appeared to result from direct insertion via one end of the element and the neighboring region of DNA, which resembles a terminal inverted repeat of IS911. Nucleotide sequence analysis revealed that IS911 carries two consecutive open reading frames which code for potential proteins showing similarities to those of the IS3 group of elements.     

Identification and characterization of IS1112 and IS1113 insertion element sequences in Xanthomonas oryzae pv. oryzae.

Two new insertion sequences (IS1112 and IS1113) were identified in the genome of Xanthomonas oryzae pv. oryzae, the causal agent of bacterial blight of rice. Three copies of IS1112 were trapped, one containing 1052-bp and the other two with 1055-bp. They all have 25-bp imperfect inverted repeats with a 3-bp duplication at the site of insertion. They contain an open reading frame (ORF) of 317 and 318 amino acid residues, respectively. IS1113 is 1306-bp, contains 25-bp imperfect terminal inverted repeats, and is flanked by a 9-bp direct repeat at the site of insertion. It contains an ORF of 395 amino acid residues.     

Tnr8, a foldback transposable element from rice

An insertion sequence 418 bp in length was found in one member of rice retroposon p-SINE1 in Oryza glaberrima. This sequence had long terminal inverted repeats (TIRs) and is flanked by direct repeats of a 9-bp sequence at the target site, indicative that the insertion sequence is a rice transposable element, which we named Tnr8. Interestingly, each TIR sequence consisted of a unique 9-bp terminal sequence and six tandem repeats of a sequence about 30 bp in length, like the foldback transposable element first identified in Drosophila. A homology search of databases and analysis by PCR revealed that a large number of Tnr8 members with sequence variations were present in the rice genome. Some of these members were not present at given loci in several rice species with the AA genome. These findings suggest that the Tnr8 family members transposed long ago, but some appear to have mobilized after rice strains with the AA genome diverged. The Tnr8 members are thought to be involved in rearrangements of the rice genome.     

E622, a miniature, virulence-associated mobile element

Miniature inverted terminal repeat elements (MITEs) are nonautonomous mobile elements that have a significant impact on bacterial evolution. Here we characterize E622, a 611-bp virulence-associated MITE from Pseudomonas syringae, which contains no coding region but has almost perfect 168-bp inverted repeats. Using an antibiotic coupling assay, we show that E622 is transposable and can mobilize an antibiotic resistance gene contained between its borders. Its predicted parent element, designated TnE622, has a typical transposon structure with a three-gene operon, consisting of resolvase, integrase, and exeA-like genes, which is bounded by the same terminal inverted repeats as E622. A broader genome level survey of the E622/TnE622 inverted repeats identified homologs in Pseudomonas, Salmonella, Shewanella, Erwinia, Pantoea, and the cyanobacteria Nostoc and Cyanothece, many of which appear to encompass known virulence genes, including genes encoding toxins, enzymes, and type III secreted effectors. Its association with niche-specific genetic determinants, along with its persistence and evolutionary diversification, indicates that this mobile element family has played a prominent role in the evolution of many agriculturally and clinically relevant pathogenic bacteria.     

Palindromy and the Location of Deletion Endpoints in Escherichia Coli

The contributions of direct and inverted repeats to deletion formation were studied by characterizing Ampr revertants of plasmids with a series of insertion mutations at a specific site in the pBR322 ampicillin resistance (amp) gene. The inserts at this site are palindromic, variable in length, and bracketed by 9- or 10-bp direct repeats of amp sequence. There is an additional direct repeat composed of 4 bp within the insert and 4 bp of adjoining amp sequence. DNA sequencing and colony hybridization of Ampr revertants showed that they contained either the parental amp sequence, implying deletion endpoints in the flanking 9- or 10-bp repeats, or a specific 1-bp substitution, implying endpoints in the 4-bp repeats. Although generally direct repeats seem to be used as deletion endpoints with a frequency proportional to their lengths, we found that with uninterrupted palindromes longer than 32 bp, the majority of deletions ended in the 4 bp, not the 9- or 10-bp repeats. This preferential use of the shorter direct repeats associated with palindromes is interpreted according to a DNA synthesis-error model in which hairpin structures formed by intrastrand pairing foster the slippage of nascent strands during DNA synthesis.     

Idaten is a new cold-inducible transposon of Volvox carteri that can be used for tagging developmentally important genes

A cold-inducible transposon called Jordan has previously been used to tag and recover genes controlling key aspects of Volvox development, including the process called inversion. In a search for additional genes, we isolated 17 new inversionless mutants from cultures grown at 24 degrees (the temperature that activates Jordan transposition). These mutants were stable at 32 degrees, but generated revertants at 24 degrees . DNA blots revealed that one mutant had a transposon unrelated to Jordan inserted in invA ("inversionless A"). This new transposon, which we named Idaten, has terminal inverted repeats (TIRs) beginning with CCCTA, and upon insertion it creates a 3-bp target-site duplication. It appears to belong to the CACTA superfamily of class II DNA transposons, which includes En/Spm. No significant open reading frames were in the Idaten sequence, but we retrieved another element with Idaten-type TIRs encoding a protein similar to the En/Spm transposase as a candidate for an Idaten-specific transposase. We found that in five of the new inversionless strains we could not find any Jordan insertions causing the phenotype to possess insertions of an Idaten family member in a single locus (invC). This clearly indicates that Idaten is a potentially powerful alternative to Jordan for tagging developmentally important genes in Volvox.