Yeast Num1p associates with the mother cell cortex during S/G2 phase and affects microtubular functions

The NUM1 gene is involved in the control of nuclear migration in Saccharomyces cerevisiae. The content of NUM1 mRNA fluctuates during the cell cycle, reaching a maximum at S/G2 phase, and the translation product Num1p associates with the cortex of mother cells mainly during S, G2, and mitosis, as seen by indirect immunofluorescence. The nuclear spindle in NUM1-deficient large-budded cells often fails to align along the mother/bud axis, while abnormally elongated astral microtubules emanate from both spindle pole bodies. A num1 null mutation confers temperature sensitivity to the cold-sensitive alpha-tubulin mutant tub1- 1, and shows synthetic lethality with the beta-tubulin mutant alleles tub2-402, tub2-403, tub2-404, and tub2-405. Deletion mapping has defined three functionally important Num1p regions: a potential EF hand Ca2+ binding site, a cluster of potential phosphorylation sites and a pleckstrin homology domain. The latter domain appears to be involved in targeting Num1p to the mother cell cortex. Our data suggest that the periodically expressed NUM1 gene product controls nuclear migration by affecting astral microtubule functions.     

Diverse effects of beta-tubulin mutations on microtubule formation and function

We have used in vitro mutagenesis and gene replacement to construct five new cold-sensitive mutations in TUB2, the sole gene encoding beta-tubulin in the yeast Saccharomyces cerevisiae. These and one previously isolated tub2 mutant display diverse phenotypes that have allowed us to define the functions of yeast microtubules in vivo. At the restrictive temperature, all of the tub2 mutations inhibit chromosome segregation and block the mitotic cell cycle. However, different microtubule arrays are present in these arrested cells depending on the tub2 allele. One mutant (tub2-401) contains no detectable microtubules, two (tub2-403 and tub2-405) contain greatly diminished levels of both nuclear and cytoplasmic microtubules, one (tub2-104) contains predominantly nuclear microtubules, one (tub2-402) contains predominantly cytoplasmic microtubules, and one (tub2-404) contains prominent nuclear and cytoplasmic microtubule arrays. Using these mutants we demonstrate here that cytoplasmic microtubules are necessary for nuclear migration during the mitotic cell cycle and for nuclear migration and fusion during conjugation; only those mutants that possess cytoplasmic microtubules are able to perform these functions. We also show that microtubules are not required for secretory vesicle transport in yeast; bud growth and invertase secretion occur in cells which contain no microtubules.     

STU1, a suppressor of a beta-tubulin mutation, encodes a novel and essential component of the yeast mitotic spindle

We have isolated a cold-sensitive allele of TUB2, the sole gene encoding beta-tubulin in S. cerevisiae, that confers a specific defect in spindle microtubule function. At 14 degrees C, tub2-406 cells lack a normal bipolar spindle but do assemble functional cytoplasmic microtubules. In an attempt to identify proteins that are important for spindle assembly, we screened for suppressors of the cold-sensitivity of tub2-406 and obtained four alleles of a novel gene, STU1. Genetic interactions between stu1 alleles and alleles of TUB1 and TUB2 suggest that Stu1p specifically interacts with microtubules. STU1 is essential for growth and disruption of STU1 causes defects in spindle assembly that are similar to those produced by the tub2-406 mutation. The nucleotide sequence of the STU1 gene predicts a protein product of 174 kD with no significant similarity to known proteins. An epitope-tagged Stulp colocalizes with microtubules in the mitotic spindle of yeast. These results demonstrate that Stulp is an essential component of the yeast mitotic spindle.     

Isolation and Characterization of Conditional-Lethal Mutations in the Tub1 α-Tubulin Gene of the Yeast Saccharomyces Cerevisiae

Microtubules in yeast are functional components of the mitotic and meiotic spindles and are essential for nuclear movement during cell division and mating. We have isolated 70 conditional-lethal mutations in the TUB1 alpha-tubulin gene of the yeast Saccharomyces cerevisiae using a plasmid replacement technique. Of the 70 mutations isolated, 67 resulted in cold-sensitivity, one resulted in temperature-sensitivity, and two resulted in both. Fine-structure mapping revealed that the mutations were located throughout the TUB1 gene. We characterized the phenotypes caused by 38 of the mutations after shifts of mutants to the nonpermissive temperature. Populations of temperature-shifted mutant cells contained an excess of large-budded cells with undivided nuclei, consistent with the previously determined role of microtubules in yeast mitosis. Several of the mutants arrested growth with a sufficiently uniform morphology to indicate that TUB1 has at least one specific role in the progression of the yeast cell cycle. A number of the mutants had gross defects in microtubule assembly at the restrictive temperature, some with no microtubules and some with excess microtubules. Other mutants contained disorganized microtubules and nuclei. There were no obvious correlations between these phenotypes and the map positions of the mutations. Greater than 90% of the mutants examined were hypersensitive to the antimicrotubule drug benomyl. Mutations that suppressed the cold-sensitive phenotypes of two of the TUB1 alleles occurred in TUB2, the single structural gene specifying beta-tubulin.     

Microtubules containing acetylated alpha-tubulin in mammalian cells in culture

The subcellular distribution of microtubules containing acetylated alpha-tubulin in mammalian cells in culture was analyzed with 6-11B-1, a monoclonal antibody specific for acetylated alpha-tubulin. Cultures of 3T3, HeLa, and PtK2 cells were grown on coverslips and observed by immunofluorescence microscopy after double-staining by 6-11B-1 and B-5-1-2, a monoclonal antibody specific for all alpha-tubulins. The antibody 6-11B-1 binds to primary cilia, centrioles, mitotic spindles, midbodies, and to subsets of cytoplasmic microtubules in 3T3 and HeLa cells, but not in PtK2 cells. These observations confirm that the acetylation of alpha-tubulin is a modification occurring in different microtubule structures and in a variety of eukaryotic cells. Some features of the acetylation of cytoplasmic microtubules of mammalian cells are also described here. First, acetylated alpha-tubulin is present in microtubules that, under depolymerizing conditions, are more stable than the majority of cytoplasmic microtubules. In addition to the specific microtubule frameworks already mentioned, cytoplasmic microtubules resistant to nocodazole or colchicine, but not cold-resistant microtubules, contain more acetylated alpha-tubulin than the rest of cellular microtubules. Second, the alpha-tubulin in all cytoplasmic microtubules of 3T3 and HeLa cells becomes acetylated in the presence of taxol, a drug that stabilizes microtubules. Third, acetylation and deacetylation of cytoplasmic microtubules are reversible in cells released from exposure to 0 degrees C or antimitotic drugs. Fourth, the epitope recognized by the antibody 6-11B-1 is not absolutely necessary for cell growth and division. This epitope is absent in PtK2 cells. The acetylation of alpha-tubulin could regulate the presence of microtubules in specific intracellular spaces by selective stabilization.     

The polarity and dynamics of microtubule assembly in the budding yeast Saccharomyces cerevisiae

Microtubule assembly in Saccharomyces cerevisiae is initiated from sites within spindle pole bodies (SPBs) in the nuclear envelope. Microtubule plus ends are thought to be organized distal to the SPBs, while minus ends are proximal. Several hypotheses for the function of microtubule motor proteins in force generation and regulation of microtubule assembly propose that assembly and disassembly occur at minus ends as well as at plus ends. Here we analyse microtubule assembly relative to the SPBs in haploid yeast cells expressing green fluorescent protein fused to alpha-tubulin, a microtubule subunit. Throughout the cell cycle, analysis of fluorescent speckle marks on cytoplasmic astral microtubules reveals that there is no detectable assembly or disassembly at minus ends. After laser-photobleaching, metaphase spindles recover about 63% of the bleached fluorescence, with a half-life of about 1 minute. After anaphase onset, photobleached marks in the interpolar spindle are persistent and do not move relative to the SPBs. In late anaphase, the elongated spindles disassemble at the microtubule plus ends. These results show for astral and anaphase interpolar spindle microtubules, and possibly for metaphase spindle microtubules, that microtubule assembly and disassembly occur at plus, and not minus, ends.     

Three-dimensional analysis and ultrastructural design of mitotic spindles from the cdc20 mutant of Saccharomyces cerevisiae.

The three-dimensional organization of mitotic microtubules in a mutant strain of Saccharomyces cerevisiae has been studied by computer-assisted serial reconstruction. At the nonpermissive temperature, cdc20 cells arrested with a spindle length of approximately 2.5 microns. These spindles contained a mean of 81 microtubules (range, 56-100) compared with 23 in wild-type spindles of comparable length. This increase in spindle microtubule number resulted in a total polymer length up to four times that of wild-type spindles. The spindle pole bodies in the cdc20 cells were approximately 2.3 times the size of wild-type, thereby accommodating the abnormally large number of spindle microtubules. The cdc20 spindles contained a large number of interpolar microtubules organized in a "core bundle." A neighbor density analysis of this bundle at the spindle midzone showed a preferred spacing of approximately 35 nm center-to-center between microtubules of opposite polarity. Although this is evidence of specific interaction between antiparallel microtubules, mutant spindles were less ordered than the spindle of wild-type cells. The number of noncore microtubules was significantly higher than that reported for wild-type, and these microtubules did not display a characteristic metaphase configuration. cdc20 spindles showed significantly more cross-bridges between spindle microtubules than were seen in the wild type. The cross-bridge density was highest between antiparallel microtubules. These data suggest that spindle microtubules are stabilized in cdc20 cells and that the CDC20 gene product may be involved in cell cycle processes that promote spindle microtubule disassembly.     

EB 1 immunofluorescence reveals an increase in growing astral microtubule length and number during anaphase in NRK-52E cells

Spindle positioning in animal cells is thought to rely upon the interaction of astral microtubules with the cell cortex. Information on the dynamics of astral microtubules during this process is scarce, in part because of the difficulty in visualising these microtubules by light microscopy. EB1 is a protein which specifically localises to growing microtubule distal tips. Immunostaining for EB1 therefore represents a powerful method for visualising the distribution of growing microtubule tips within cells. In this study we used EB1 immunostaining in mitotic NRK-52E cells to quantitatively analyse the length and number of growing astral microtubules during metaphase and anaphase. We observed a dramatic increase in growing astral microtubule length and number during anaphase. Furthermore, drug treatments which specifically destroyed astral microtubules resulted in an increase in misaligned anaphase but not metaphase spindles. We suggest that an anaphase-specific increase in growing astral microtubule length and number facilitates the maintenance of a correctly aligned spindle in mitotic NRK-52E cells.     

Astral microtubules are not required for anaphase B in Saccharomyces cerevisiae

tub2-401 is a cold-sensitive allele of TUB2, the sole gene encoding beta-tubulin in the yeast, Saccharomyces cerevisiae. At 18 degrees C, tub2-401 cells are able to assemble spindle microtubules but lack astral microtubules. Under these conditions, movement of the spindle to the bud neck is blocked. However, spindle elongation and chromosome separation are unimpeded and occur entirely within the mother cell. Subsequent cytokinesis produces one cell with two nuclei and one cell without a nucleus. The anucleate daughter can not bud. The binucleate daughter proceeds through another cell cycle to produce a cell with four nuclei and another anucleate cell. With additional time in the cold, the number of nuclei in the nucleated cells continues to increase and the percentage of anucleate cells in the population rises. The results indicate that astral microtubules are needed to position the spindle in the bud neck but are not required for spindle elongation at anaphase B. In addition, cell cycle progression does not depend on the location or orientation of the spindle.     

Genetically essential and nonessential alpha-tubulin genes specify functionally interchangeable proteins.

Microtubules in yeast are essential components of the mitotic and meiotic spindles and are essential for nuclear movement during cell division and mating. The relative importance in these processes of the two divergent alpha-tubulin genes of the budding yeast Saccharomyces cerevisiae, TUB1 and TUB3, was examined through the construction of null mutations and by increasing their copy number on chromosomes and on plasmids. Experiments with null alleles of TUB3 showed that TUB3 was not essential for mitosis, meiosis, or mating. Null alleles of TUB3, however, did cause several phenotypes, including hypersensitivity to the antimicrotubule drug benomyl and poor spore viability. On the other hand, the TUB1 gene was essential for growth of normal haploid cells. Even in diploids heterozygous for a TUB1 null allele, several dominant phenotypes were evident, including slow growth and poor sporulation. This functional difference between the two genes is apparently due to different levels of expression, because extra copies of either gene could suppress the defects caused by a null mutation in the other. We conclude that in spite of the 10% divergence between the products of the two genes, there is no essential qualitative functional difference between them.     

Drosophila EB1 is important for proper assembly,dynamics, and positioning of the mitotic spindle

EB1 is an evolutionarily conserved protein that localizes to the plus ends of growing microtubules. In yeast, the EB1 homologue (BIM1) has been shown to modulate microtubule dynamics and link microtubules to the cortex, but the functions of metazoan EB1 proteins remain unknown. Using a novel preparation of the Drosophila S2 cell line that promotes cell attachment and spreading, we visualized dynamics of single microtubules in real time and found that depletion of EB1 by RNA-mediated inhibition (RNAi) in interphase cells causes a dramatic increase in nondynamic microtubules (neither growing nor shrinking), but does not alter overall microtubule organization. In contrast, several defects in microtubule organization are observed in RNAi-treated mitotic cells, including a drastic reduction in astral microtubules, malformed mitotic spindles, defocused spindle poles, and mispositioning of spindles away from the cell center. Similar phenotypes were observed in mitotic spindles of Drosophila embryos that were microinjected with anti-EB1 antibodies. In addition, live cell imaging of mitosis in Drosophila embryos reveals defective spindle elongation and chromosomal segregation during anaphase after antibody injection. Our results reveal crucial roles for EB1 in mitosis, which we postulate involves its ability to promote the growth and interactions of microtubules within the central spindle and at the cell cortex.     

Mutations in alpha- and beta-tubulin affect spindle formation in Chinese hamster ovary cells

Two Chinese hamster ovary cell lines with mutated beta-tubulins (Grs-2 and Cmd-4) and one that has a mutation in alpha-tubulin (Tax-1) are temperature sensitive for growth at 40.5 degrees C. To determine the functional defect in these mutant cells at the nonpermissive temperature, they were characterized with respect to cell cycle parameters and microtubule organization and function after relatively short periods at 40.5 degrees C. At the nonpermissive temperature all the mutants had normal appearing cytoplasmic microtubules. Premature chromosome condensation analysis failed to show any discrete step in the interphase cell cycle in which these mutants are arrested. These cells, however, show several defects at the nonpermissive temperature that appear related to the function of microtubules during mitosis. Time-lapse studies showed that mitosis was lengthened in the three mutant lines at 40.5 degrees C as compared with the wild-type cells at this temperature, resulting in a higher proportion of cells in mitosis after temperature shift. There was also a large increase in multinucleated cells in mutant populations after incubation at the nonpermissive temperature. Immunofluorescent studies using a monoclonal anti--alpha-tubulin antibody showed that the mutant cells had a high proportion of abnormal spindles at the nonpermissive temperature. The two altered beta-tubulins and the altered alpha-tubulin all were found to cause a similar phenotype at the high temperature that results in mitotic delay, defective cytokinesis, multinucleation, and ultimately, cell death. We conclude that spindle formation is the limiting microtubule function in these mutant cell lines at the nonpermissive temperature and that these cell lines will be of value for the study of the precise role of tubulin in mammalian spindle formation.     

The appearance of acetylated alpha-tubulin during early development and cellular differentiation in Xenopus

Early development in Xenopus is characterized by dramatic changes in the organization of the microtubule cytoskeleton. We have used whole-mount immunocytochemistry to follow the expression of the acetylated form of alpha-tubulin during early Xenopus development. In the egg and early embryo, the monoclonal anti-acetylated tubulin antibody 6-11B-1 stained meiotic and mitotic spindles, midbody microtubules, and what appears to be the central region of the sperm aster; the antibody did not stain the sperm aster itself or the cortical microtubule system associated with the rotation of the fertilized egg. Following gastrulation, acetylated tubulin disappeared from all but mitotic midbody microtubules. During the course of neurulation high levels of acetylated tubulin reappeared in the precursors of the ciliated epidermal cells (stage 15), transiently in neural folds (stage 16/17), in neuronal processes (stage 18/19), and in somas (stage 21). The changing pattern of anti-acetylated tubulin staining during Xenopus development raises intriguing questions as to the physiological significance of tubulin acetylation.     

Insertions of up to 17 amino acids into a region of alpha-tubulin do not disrupt function in vivo.

Microtubules in yeasts are essential components of the mitotic and meiotic spindle and are necessary for nuclear movement during cell division and mating. The yeast Saccharomyces cerevisiae has two alpha-tubulin genes, TUB1 and TUB3, either of which alone is sufficient for these processes when present in a high enough copy number. Comparisons of sequences from several species reveals the presence of a variable region near the amino terminus of alpha-tubulin proteins. We perturbed the structure of this region in TUB3 by inserting into it 3, 9, or 17 amino acids and tested the ability of these altered proteins to function as the only alpha-tubulin protein in yeast cells. We found that each of these altered proteins was sufficient on its own for mitotic growth, mating, and methods of yeast. We conclude that this region can tolerate considerable variation without losing any of the highly conserved functions of alpha-tubulin. Our results suggest that variability in this region occurs because it can be tolerated, not because it specifies an important function for the protein.     

Ultrastructural colocalization of tyrosinated and detyrosinated alpha-tubulin in interphase and mitotic cells

Immunofluorescence with specific peptide antibodies has previously established that tyrosinated (Tyr) and detyrosinated (Glu) tubulin, the two species generated by posttranslational modification of the COOH-terminus of alpha-tubulin, are present in distinct, but overlapping, subsets of microtubules in cultured cells (Gundersen, G. G., M. H. Kalnoski, and J. C. Bulinski, 1984, Cell, 38:779-789). Similar results were observed by light microscopic immunogold staining in the two cell types used in this study, CV1 and PtK2 cells: most microtubules were stained with the Tyr antibody, whereas only a few were stained with the Glu antibody. We have examined immunogold-stained preparations by electron microscopy to extend these results. In general, electron microscopic localization confirmed results obtained at the light microscopic level: the majority of the microtubules in CV1 and PtK2 cells were nearly continuously labeled with the Tyr antibody, whereas only a few were heavily labeled with the Glu antibody. However, in contrast to the light microscopic staining, we found that all microtubules of interphase and mitotic CV1 and PtK2 cells contained detectable Tyr and Glu immunoreactivity at the electron microscopic level. No specific localization of either species was observed in microtubules near particular organelles (e.g., mitochondria or intermediate filaments). Quantification of the relative levels of Glu and Tyr immunoreactivity in individual interphase and metaphase microtubules showed that all classes of spindle microtubules (i.e., kinetochore, polar, and astral) contained nearly the same level of Glu immunoreactivity; this level of Glu immunoreactivity was lower than that found in all interphase microtubules. Most interphase microtubules had low levels of Glu immunoreactivity, whereas a few had relatively high levels; the latter corresponded to morphologically sinuous microtubules. Quantification of the relative levels of Tyr and Glu immunoreactivity in segments along individual microtubules suggested that the level of Tyr (or Glu) tubulin in a given microtubule was uniform along its length. Understanding how microtubules with different levels of Tyr and Glu tubulin arise will be important for understanding the role of tyrosination/detyrosination in microtubule function. Additionally, the coexistence of microtubules with different levels of the two species may have important implications for microtubule dynamics in vivo.     

Two functional alpha-tubulin genes of the yeast Saccharomyces cerevisiae encode divergent proteins.

Two alpha-tubulin genes from the budding yeast Saccharomyces cerevisiae were identified and cloned by cross-species DNA homology. Nucleotide sequencing studies revealed that the two genes, named TUB1 and TUB3, encoded gene products of 447 and 445 amino acids, respectively, that are highly homologous to alpha-tubulins from other species. Comparison of the sequences of the two genes revealed a 19% divergence between the nucleotide sequences and a 10% divergence between the amino acid sequences. Each gene had a single intervening sequence, located at an identical position in codon 9. Cell fractionation studies showed that both gene products were present in yeast microtubules. These two genes, along with the TUB2 beta-tubulin gene, probably encode the entire complement of tubulin in budding yeast cells.     

Reorientation of mispositioned spindles in short astral microtubule mutant spc72Delta is dependent on spindle pole body outer plaque and Kar3 motor protein

Nuclear migration and positioning in Saccharomyces cerevisiae depend on long astral microtubules emanating from the spindle pole bodies (SPBs). Herein, we show by in vivo fluorescence microscopy that cells lacking Spc72, the SPB receptor of the cytoplasmic gamma-tubulin complex, can only generate very short (<1 microm) and unstable astral microtubules. Consequently, nuclear migration to the bud neck and orientation of the anaphase spindle along the mother-bud axis are absent in these cells. However, SPC72 deletion is not lethal because elongated but misaligned spindles can frequently reorient in mother cells, permitting delayed but otherwise correct nuclear segregation. High-resolution time-lapse sequences revealed that this spindle reorientation was most likely accomplished by cortex interactions of the very short astral microtubules. In addition, a set of double mutants suggested that reorientation was dependent on the SPB outer plaque and the astral microtubule motor function of Kar3 but not Kip2/Kip3/Dhc1, or the cortex components Kar9/Num1. Our observations suggest that Spc72 is required for astral microtubule formation at the SPB half-bridge and for stabilization of astral microtubules at the SPB outer plaque. In addition, our data exclude involvement of Spc72 in spindle formation and elongation functions.     

Time-lapse video microscopy analysis reveals astral microtubule detachment in the yeast spindle pole mutant cnm67

Saccharomyces cerevisiae cnm67Delta cells lack the spindle pole body (SPB) outer plaque, the main attachment site for astral (cytoplasmic) microtubules, leading to frequent nuclear segregation failure. We monitored dynamics of green fluorescent protein-labeled nuclei and microtubules over several cell cycles. Early nuclear migration steps such as nuclear positioning and spindle orientation were slightly affected, but late phases such as rapid oscillations and insertion of the anaphase nucleus into the bud neck were mostly absent. Analyzes of microtubule dynamics revealed normal behavior of the nuclear spindle but frequent detachment of astral microtubules after SPB separation. Concomitantly, Spc72 protein, the cytoplasmic anchor for the gamma-tubulin complex, was partially lost from the SPB region with dynamics similar to those observed for microtubules. We postulate that in cnm67Delta cells Spc72-gamma-tubulin complex-capped astral microtubules are released from the half-bridge upon SPB separation but fail to be anchored to the cytoplasmic side of the SPB because of the absence of an outer plaque. However, successful nuclear segregation in cnm67Delta cells can still be achieved by elongation forces of spindles that were correctly oriented before astral microtubule detachment by action of Kip3/Kar3 motors. Interestingly, the first nuclear segregation in newborn diploid cells never fails, even though astral microtubule detachment occurs.