Synthesis of lipopolysaccharide O side chains by Pseudomonas aeruginosa PAO1 requires the enzyme phosphomannomutase.

We have cloned a lipopolysaccharide (LPS) biosynthetic gene from Pseudomonas aeruginosa PAO1 that complements the defect in the production and incorporation of LPS O side chains in the LPS-rough strain AK1012. This gene was characterized by pulsed-field gel electrophoresis, deletion and restriction mapping of the cloned DNA, and biochemical analysis of the protein product. The cloned DNA was found to map to the 7-to-11-min region of the P. aeruginosa chromosome, and the gene needed for complementation of the LPS-rough phenotype was contained on a 2.6-kb HindIII-SacI fragment. This same size restriction fragment contains the alginate gene algC, which encodes the enzyme phosphomannomutase (PMM) and also maps to this region of the P. aeruginosa chromosome. The LPS-rough strain AK1012 was deficient in PMM activity, and this activity was restored to parental levels when the cloned gene was transferred to strain AK1012. In addition, the cloned gene could complement the PMM deficiency in the algC mutant strain 8858, and the cloned algC gene could restore the LPS-smooth phenotype to strain AK1012. These results indicate that the gene we have cloned is equivalent to the alginate gene algC. We designate this gene pmm to emphasize that it encodes the enzyme PMM, which has been shown to be essential for alginate production, and we demonstrate that PMM activity is required for the LPS-smooth phenotype in P. aeruginosa PAO1.     

Purification and characterization of phosphomannomutase/phosphoglucomutase from Pseudomonas aeruginosa involved in biosynthesis of both alginate and lipopolysaccharide.

The algC gene from Pseudomonas aeruginosa has been shown to encode phosphomannomutase (PMM), an essential enzyme for biosynthesis of alginate and lipopolysaccharide (LPS). This gene was overexpressed under control of the tac promoter, and the enzyme was purified and its substrate specificity and metal ion effects were characterized. The enzyme was determined to be a monomer with a molecular mass of 50 kDa. The enzyme catalyzed the interconversion of mannose 1-phosphate (M1P) and mannose 6-phosphate, as well as that of glucose 1-phosphate (G1P) and glucose 6-phosphate. The apparent Km values for M1P and G1P were 17 and 22 microM, respectively. On the basis of Kcat/Km ratio, the catalytic efficiency for G1P was about twofold higher than that for M1P. PMM also catalyzed the conversion of ribose 1-phosphate and 2-deoxyglucose 6-phosphate to their corresponding isomers, although activities were much lower. Purified PMM/phosphoglucomutase (PGM) required Mg2+ for maximum activity; Mn2+ was the only other divalent metal that showed some activation. The presence of other divalent metals in addition to Mg2+ in the reaction inhibited the enzymatic activity. PMM and PGM activities could not be detected in nonmucoid algC mutant strain 8858 and in LPS-rough algC mutant strain AK1012, while they were present in the wild-type strains as well as in algC-complemented mutant strains. This evidence suggests that AlgC functions as PMM and PGM in vivo, converting phosphomannose and phosphoglucose in the biosynthesis of both alginate and LPS.     

Regulation of urease gene expression by Streptococcus salivarius growing in biofilms

The metabolism of urea by urease enzymes of oral bacteria profoundly influences oral biofilm pH homeostasis and oral microbial ecology. The purpose of this study was to gain insight into the regulation of expression of the low pH-inducible urease genes in populations of Streptococcus salivarius growing in vitro in biofilms and to explore whether urease regulation or the levels of urease expression in biofilm cells differed significantly from planktonic cells. Two strains of S. salivarius harbouring urease promoter fusions to a chloramphenicol acetyltransferase (cat) gene were used: PurelCAT, containing a fusion to the full-length, pH-sensitive promoter; or Pureldelta100CAT, a constitutively derepressed deletion derivative of the urease gene promoter. The strains were grown in a Rototorque biofilm reactor in a tryptone-yeast extract-sucrose medium with or without pH control. Both CAT and urease activities in biofilms were measured at 'quasi-steady state' and after a 25mM glucose pulse. The results showed that CAT expression in PurelCAT was repressed at relatively neutral pH values, and that expression could be induced by acidic pH after carbohydrate challenge. Biofilms of PurelCAT grown at low pH, without buffering, had about 20-fold higher CAT levels, and only a modest further induction could be elicited with carbohydrate pulsing. The levels of CAT in biofilms of PurelCAT grown in buffered medium were slightly higher than those reported for planktonic cells cultured at pH 7.0, and the levels of CAT in Purel-CAT growing at low pH or after induction were similar to those reported for fully induced planktonic cells. CAT activity in Pureldelta100CAT was constitutively high, regardless of growth conditions. Interestingly, urease activity detected in biofilms of the parent strain, S. salivarius 57.1, could be as much as 130-fold higher than that reported for fluid chemostat cultures grown under similar conditions. The higher level of urease activity in biofilms was probably caused by the accumulation of the stable urease enzyme within biofilm cells, low pH microenvironments and the growth phase of populations of cells in the biofilm. The ability of S. salivarius biofilm cells to upregulate urease expression in response to pH gradients and to accumulate greater quantities of urease enzyme when growing in biofilms may have a significant impact on oral biofilm pH homeostasis and microbial ecology in vivo. Additionally, S. salivarius carrying the pH-sensitive urease gene promoter fused to an appropriate reporter gene may be a useful biological probe for sensing biofilm pH in situ.     

Pseudomonas aeruginosa Displays Multiple Phenotypes during Development as a Biofilm

Complementary approaches were employed to characterize transitional episodes in Pseudomonas aeruginosa biofilm development using direct observation and whole-cell protein analysis. Microscopy and in situ reporter gene analysis were used to directly observe changes in biofilm physiology and to act as signposts to standardize protein collection for two-dimensional electrophoretic analysis and protein identification in chemostat and continuous-culture biofilm-grown populations. Using these approaches, we characterized five stages of biofilm development: (i) reversible attachment, (ii) irreversible attachment, (iii) maturation-1, (iv) maturation-2, and (v) dispersion. Biofilm cells were shown to change regulation of motility, alginate production, and quorum sensing during the process of development. The average difference in detectable protein regulation between each of the five stages of development was 35% (approximately 525 proteins). When planktonic cells were compared with maturation-2 stage biofilm cells, more than 800 proteins were shown to have a sixfold or greater change in expression level (over 50% of the proteome). This difference was higher than when planktonic P. aeruginosa were compared with planktonic cultures of Pseudomonas putida. Las quorum sensing was shown to play no role in early biofilm development but was important in later stages. Biofilm cells in the dispersion stage were more similar to planktonic bacteria than to maturation-2 stage bacteria. These results demonstrate that P. aeruginosa displays multiple phenotypes during biofilm development and that knowledge of stage-specific physiology may be important in detecting and controlling biofilm growth.     

The impact of culture medium on the development and physiology of biofilms of Pseudomonas fluorescens formed on polyurethane paint

Microbial biofilms cause the deterioration of polymeric coatings such as polyurethanes (PUs). In many cases, microbes have been shown to use the PU as a nutrient source. The interaction between biofilms and nutritive substrata is complex, since both the medium and the substratum can provide nutrients that affect biofilm formation and biodeterioration. Historically, studies of PU biodeterioration have monitored the planktonic cells in the medium surrounding the material, not the biofilm. This study monitored planktonic and biofilm cell counts, and biofilm morphology, in long-term growth experiments conducted with Pseudomonas fluorescens under different nutrient conditions. Nutrients affected planktonic and biofilm cell numbers differently, and neither was representative of the system as a whole. Microscopic examination of the biofilm revealed the presence of intracellular storage granules in biofilms grown in M9 but not yeast extract salts medium. These granules are indicative of nutrient limitation and/or entry into stationary phase, which may impact the biodegradative capability of the biofilm.     

E. coli biofilm formation and its susceptibility towards T4 bacteriophages studied in a continuously operating mixing – tubular bioreactor system

A system consisting of a connected mixed and tubular bioreactor was designed to study bacterial biofilm formation and the effect of its exposure to bacteriophages under different experimental conditions. The bacterial biofilm inside silicone tubular bioreactor was formed during the continuous pumping of bacterial cells at a constant physiological state for 2 h and subsequent washing with a buffer for 24 h. Monitoring bacterial and bacteriophage concentration along the tubular bioreactor was performed via a piercing method. The presence of biofilm and planktonic cells was demonstrated by combining the piercing method, measurement of planktonic cell concentration at the tubular bioreactor outlet, and optical microscopy. The planktonic cell formation rate was found to be 8.95 × 10⁻³ h⁻¹ and increased approximately four-fold (4×) after biofilm exposure to an LB medium. Exposure of bacterial biofilm to bacteriophages in the LB medium resulted in a rapid decrease of biofilm and planktonic cell concentration, to below the detection limit within < 2 h. When bacteriophages were supplied in the buffer, only a moderate decrease in the concentration of both bacterial cell types was observed. After biofilm washing with buffer to remove unadsorbed bacteriophages, its exposure to the LB medium (without bacteriophages) resulted in a rapid decrease in bacterial concentration: again below the detection limit in < 2 h.     

Reduced susceptibility of thin Pseudomonas aeruginosa biofilms to hydrogen peroxide and monochloramine

Pseudomonas aeruginosa attached to alginate gel beads in sparse, thin biofilms exhibited reduced susceptibility to monochloramine and hydrogen peroxide compared with planktonic cells of the same micro-organism. Disinfection rate coefficients for planktonic bacteria averaged 0.551 mg(-1)min(-1) for monochloramine and 3.1 x 10(-4)l mg(-1) min(-1) for hydrogen peroxide. The corresponding values for 24-h-old biofilm cells were 0.291 mg min(-1) and 9.2 x 10(-5) 1 mg(-1) min(-1) for monochloramine and hydrogen peroxide, respectively. Several pieces of evidence support the interpretation that the reduced susceptibility of biofilm was not due simply to inadequate delivery of the antimicrobial agent to the local environment of the attached cells. No correlation between biofilm susceptibility and biofilm initial areal cell density was observed. Rapid delivery of hydrogen peroxide to the attachment surface, and subsequently to the interior, of the alginate gel beads was visualized by a direct experimental technique. Theoretical analysis of unsteady diffusion and diffusion reaction interactions also argued against any significant delay or barrier to antimicrobial or oxygen delivery. It was hypothesized that new genes are expressed when bacteria attach to a surface and begin to form a biofilm and that some of the resulting gene products reduce the susceptibility of the cell to antimicrobial agents including oxidative biocides such as monochloramine and hydrogen peroxide.     

Factors affecting catalase expression in Pseudomonas aeruginosa biofilms and planktonic cells

Previous work with Pseudomonas aeruginosa showed that catalase activity in biofilms was significantly reduced relative to that in planktonic cells. To better understand biofilm physiology, we examined possible explanations for the differential expression of catalase in cells cultured in these two different conditions. For maximal catalase activity, biofilm cells required significantly more iron (25 microM as FeCl(3)) in the medium, whereas planktonic cultures required no addition of iron. However, iron-stimulated catalase activity in biofilms was still only about one-third that in planktonic cells. Oxygen effects on catalase activity were also investigated. Nitrate-respiring planktonic cultures produced approximately twice as much catalase activity as aerobic cultures grown in the presence of nitrate; the nitrate stimulation effect could also be demonstrated in biofilms. Cultures fermenting arginine had reduced catalase levels; however, catalase repression was also observed in aerobic cultures grown in the presence of arginine. It was concluded that iron availability, but not oxygen availability, is a major factor affecting catalase expression in biofilms.     

Biofilm form and function: carbon availability affects biofilm architecture, metabolic activity and planktonic cell yield

Aims: To investigate carbon transformation by biofilms and changes in biofilm architecture, metabolic activity and planktonic cell yield in response to fluctuating carbon availability. Methods and Results: Pseudomonas sp. biofilms were cultured under alternating carbon‐replete and carbon‐limited conditions. A shift to medium without added carbon led to a 90% decrease in biofilm respiration rate and a 40% reduction in planktonic cell yield within 1 h. Attached cell division and progeny release were shown to contribute to planktonic cell numbers during carbon limitation. Development of a significantly enlarged biofilm surface area during carbon limitation facilitated a rapid increase in whole‐biofilm metabolic activity, cell yield and biomass upon the re‐introduction of carbon after 8 days of limitation. The cumulative number of planktonic cells (>10¹⁰ CFU) released from the biofilm during the cultivation period contained only 1·0% of the total carbon available to the biofilm, with 6·5% of the carbon retained in the biofilm and 54% mineralized to CO₂. Conclusions: Biofilm‐derived planktonic cell yield is a proliferation mechanism. The rapid response of biofilms to environmental perturbations facilitates the optimal utilization of resources to promote both proliferation and survival. Biofilms function as efficient catalysts for environmental carbon transformation and mineralization. Significance and Impact of the study: A greater understanding of the relationship between biofilm form and function can inform strategies intended to control and/or promote biofilm formation.     

Study of the response of a biofilm bacterial community to UV radiation

We have developed a bioluminescent whole-cell biosensor that can be incorporated into biofilm ecosystems. RM4440 is a Pseudomonas aeruginosa FRD1 derivative that carries a plasmid-based recA-luxCDABE fusion. We immobilized RM4440 in an alginate matrix to simulate a biofilm, and we studied its response to UV radiation damage. The biofilm showed a protective property by physical shielding against UV C, UV B, and UV A. Absorption of UV light by the alginate matrix translated into a higher survival rate than observed with planktonic cells at similar input fluences. UV A was shown to be effectively blocked by the biofilm matrix and to have no detectable effects on cells contained in the biofilm. However, in the presence of photosensitizers (i.e., psoralen), UV A was effective in inducing light production and cell death. RM4440 has proved to be a useful tool to study microbial communities in a noninvasive manner.     

Study of the Response of a Biofilm Bacterial Community to UV Radiation

We have developed a bioluminescent whole-cell biosensor that can be incorporated into biofilm ecosystems. RM4440 is a Pseudomonas aeruginosa FRD1 derivative that carries a plasmid-based recA-luxCDABE fusion. We immobilized RM4440 in an alginate matrix to simulate a biofilm, and we studied its response to UV radiation damage. The biofilm showed a protective property by physical shielding against UV C, UV B, and UV A. Absorption of UV light by the alginate matrix translated into a higher survival rate than observed with planktonic cells at similar input fluences. UV A was shown to be effectively blocked by the biofilm matrix and to have no detectable effects on cells contained in the biofilm. However, in the presence of photosensitizers (i.e., psoralen), UV A was effective in inducing light production and cell death. RM4440 has proved to be a useful tool to study microbial communities in a noninvasive manner.