Localization and Expression of MreB in Vibrio parahaemolyticus under Different Stresses

MreB, the homolog of eukaryotic actin, may play a vital role when prokaryotes cope with stress by altering their spatial organization, including their morphology, subcellular architecture, and localization of macromolecules. This study investigates the behavior of MreB in Vibrio parahaemolyticus under various stresses. The behavior of MreB was probed using a yellow fluorescent protein-MreB conjugate in merodiploid strain SC9. Under normal growth conditions, MreB formed helical filaments in exponential-phase cells. The shape of starved or stationary-phase cells changed from rods to small spheroids. The cells differentiated into the viable but nonculturable (VBNC) state with small spherical cells via a “swelling-waning” process. In all cases, drastic remodeling of the MreB cytoskeleton was observed. MreB helices typically were loosened and fragmented into short filaments, arcs, and spots in bacteria under these stresses. The disintegrated MreB exhibited a strong tendency to attach to the cytoplasmic membrane. The expression of mreB generally declined in bacteria in the stationary phase and under starvation but was upregulated during the initial periods of cold shock and VBNC state differentiation and decreased afterwards. Our findings demonstrated the behavior of MreB in the morphological changes of V. parahaemolyticus under intrinsic or extrinsic stresses and may have important implications for studying the cellular stress response and aging.     

A Highlights from MBoC Selection: Motion of variable-length MreB filaments at the bacterial cell membrane influences cell morphology

The maintenance of rod-cell shape in many bacteria depends on actin-like MreB proteins and several membrane proteins that interact with MreB. Using superresolution microscopy, we show that at 50-nm resolution, Bacillus subtilis MreB forms filamentous structures of length up to 3.4 μm underneath the cell membrane, which run at angles diverging up to 40° relative to the cell circumference. MreB from Escherichia coli forms at least 1.4-μm-long filaments. MreB filaments move along various tracks with a maximal speed of 85 nm/s, and the loss of ATPase activity leads to the formation of extended and static filaments. Suboptimal growth conditions lead to formation of patch-like structures rather than extended filaments. Coexpression of wild-type MreB with MreB mutated in the subunit interface leads to formation of shorter MreB filaments and a strong effect on cell shape, revealing a link between filament length and cell morphology. Thus MreB has an extended-filament architecture with the potential to position membrane proteins over long distances, whose localization in turn may affect the shape of the cell wall.     

Sublethal High Hydrostatic Pressure Treatment Reveals the Importance of Genes Coding Cytoskeletal Protein in Escherichia Coli Morphogenesis

We studied morphologic changes after sublethal high hydrostatic pressure treatment (HPT) of Escherichia coli K-12 strains in which genes related to the cytoskeleton, cell wall, and cell division had been deleted. Some long filamentous and swelling cells were observed in wild-type bacteria, while some spherical, branched, or collapsed cells were observed in deletion mutants. In particular, ΔzapA and ΔrodZ showed distinguished morphologies. ZapA supports FtsZ, a cytoskeletal protein, forming ring with ZapB. RodZ, a cytoskeletal protein, interacts with MreB, also a cytoskeletal protein, and both factors are necessary for maintaining the rod shape of the cell. These results showed that insufficient formation of FtsZ rings induced cell elongation and that insufficient formation of MreB induced a branched and collapsed cell shape. Therefore, the correct formation of the bacteria cytoskeleton by FtsZ rings and MreB is important for keeping normal cell shape during growth after HPT, and the polymerization of cytoskeletal proteins was a critical target of sublethal HPT. These results indicate that sublethal HPT induces bacterial cell morphologic change and provide important information on the role of genes involved in morphogenesis. Therefore, sublethal HPT may be a good tool for studying the morphogenesis of bacterial cells.     

MreB-Dependent Organization of the E.?coli Cytoplasmic Membrane Controls Membrane Protein Diffusion

The functional organization of prokaryotic cell membranes, which is essential for many cellular processes, has been challenging to analyze due to the small size and nonflat geometry of bacterial cells. Here, we use single-molecule fluorescence microscopy and three-dimensional quantitative analyses in live Escherichia coli to demonstrate that its cytoplasmic membrane contains microdomains with distinct physical properties. We show that the stability of these microdomains depends on the integrity of the MreB cytoskeletal network underneath the membrane. We explore how the interplay between cytoskeleton and membrane affects trans-membrane protein (TMP) diffusion and reveal that the mobility of the TMPs tested is subdiffusive, most likely caused by confinement of TMP mobility by the submembranous MreB network. Our findings demonstrate that the dynamic architecture of prokaryotic cell membranes is controlled by the MreB cytoskeleton and regulates the mobility of TMPs.     

The Helical MreB Cytoskeleton in Escherichia coli MC1000/pLE7 Is an Artifact of the N-Terminal Yellow Fluorescent Protein Tag

Based on fluorescence microscopy, the actin homolog MreB has been thought to form extended helices surrounding the cytoplasm of rod-shaped bacterial cells. The presence of these and other putative helices has come to dominate models of bacterial cell shape regulation, chromosome segregation, polarity, and motility. Here we use electron cryotomography to show that MreB does in fact form extended helices and filaments in Escherichia coli when yellow fluorescent protein (YFP) is fused to its N terminus but native (untagged) MreB expressed to the same levels does not. In contrast, mCherry fused to an internal loop (MreB-RFP^SW) does not induce helices. The helices are therefore an artifact of the placement of the fluorescent protein tag. YFP-MreB helices were also clearly distinguishable from the punctate, “patchy” localization patterns of MreB-RFP^SW, even by standard light microscopy. The many interpretations in the literature of such punctate patterns as helices should therefore be reconsidered.     

Large-scale purification and in vitro characterization of the assembly of MreB from Leptospira interrogans

BackgroundWeil's syndrome is caused by Leptospira interrogans infections, a Gram negative bacterium with a distinct thin corkscrew cell shape. The molecular basis for this unusual morphology is unknown. In many bacteria, cell wall synthesis is orchestrated by the actin homolog, MreB.MethodsHere we have identified the MreB within the L. interrogans genome and expressed the His-tagged protein product of the synthesized gene (Li-MreB) in Escherichia coli. Li-MreB did not purify under standard nucleotide-free conditions used for MreBs from other species, requiring the continual presence of ATP to remain soluble. Covalent modification of Li-MreB free thiols with Alexa488 produced a fluorescent version of Li-MreB.ResultsWe developed native and denaturing/refolding purification schemes for Li-MreB. The purified product was shown to assemble and disassemble in MgCl₂ and KCl dependent manners, as monitored by light scattering and sedimentation studies. The fluorescence spectrum of labeled Li-MreB-Alexa488 showed cation-induced changes in line with an activation process followed by a polymerization phase. The resulting filaments appeared as bundles and sheets under the fluorescence microscope. Finally, since the Li-MreB polymerization was cation dependent, we developed a simple method to measure monovalent cation concentrations within a test case prokaryote, E. coli.ConclusionsWe have identified and initially characterized the cation-dependent polymerization properties of a novel MreB from a non-rod shaped bacterium and developed a method to measure cation concentrations within prokaryotes.General significance.This initial characterization of Li-MreB will enable future structural determination of the MreB filament from this corkscrew-shaped bacterium.     

Purification and Characterization of Escherichia coli MreB Protein

The actin homolog MreB is required in rod-shaped bacteria for maintenance of cell shape and is intimately connected to the holoenzyme that synthesizes the peptidoglycan layer. The protein has been reported variously to exist in helical loops under the cell surface, to rotate, and to move in patches in both directions around the cell surface. Studies of the Escherichia coli protein in vitro have been hampered by its tendency to aggregate. Here we report the purification and characterization of native E. coli MreB. The protein requires ATP hydrolysis for polymerization, forms bundles with a left-hand twist that can be as long as 4 μm, forms sheets in the presence of calcium, and has a critical concentration for polymerization of 1.5 μm.     

Superresolution Imaging of Dynamic MreB Filaments in B.?subtilis—A Multiple-Motor-Driven Transport?

The cytoskeletal protein MreB is an essential component of the bacterial cell-shape generation system. Using a superresolution variant of total internal reflection microscopy with structured illumination, as well as three-dimensional stacks of deconvolved epifluorescence microscopy, we found that inside living Bacillus subtilis cells, MreB forms filamentous structures of variable lengths, typically not longer than 1 μm. These filaments move along their orientation and mainly perpendicular to the long bacterial axis, revealing a maximal velocity at an intermediate length and a decreasing velocity with increasing filament length. Filaments move along straight trajectories but can reverse or alter their direction of propagation. Based on our measurements, we provide a mechanistic model that is consistent with all observations. In this model, MreB filaments mechanically couple several motors that putatively synthesize the cell wall, whereas the filaments’ traces mirror the trajectories of the motors. On the basis of our mechanistic model, we developed a mathematical model that can explain the nonlinear velocity length dependence. We deduce that the coupling of cell wall synthesis motors determines the MreB filament transport velocity, and the filament mechanically controls a concerted synthesis of parallel peptidoglycan strands to improve cell wall stability.     

Differentiated roles for MreB‐actin isologues and autolytic enzymes in Bacillus subtilis morphogenesis

Cell morphogenesis in most bacteria is governed by spatiotemporal growth regulation of the peptidoglycan cell wall layer. Much is known about peptidoglycan synthesis but regulation of its turnover by hydrolytic enzymes is much less well understood. Bacillus subtilis has a multitude of such enzymes. Two of the best characterized are CwlO and LytE: cells lacking both enzymes have a lethal block in cell elongation. Here we show that activity of CwlO is regulated by an ABC transporter, FtsEX, which is required for cell elongation, unlike cell division as in Escherichia coli. Actin‐like MreB proteins are thought to play a key role in orchestrating cell wall morphogenesis. B. subtilis has three MreB isologues with partially differentiated functions. We now show that the three MreB isologues have differential roles in regulation of the CwlO and LytE systems and that autolysins control different aspects of cell morphogenesis. The results add major autolytic activities to the growing list of functions controlled by MreB isologues in bacteria and provide new insights into the different specialized functions of essential cell wall autolysins.     

The small G-protein MglA connects to the MreB actin cytoskeleton at bacterial focal adhesions

In Myxococcus xanthus the gliding motility machinery is assembled at the leading cell pole to form focal adhesions, translocated rearward to propel the cell, and disassembled at the lagging pole. We show that MglA, a Ras-like small G-protein, is an integral part of this machinery. In this function, MglA stimulates the assembly of the motility complex by directly connecting it to the MreB actin cytoskeleton. Because the nucleotide state of MglA is regulated spatially and MglA only binds MreB in the guanosine triphosphate–bound form, the motility complexes are assembled at the leading pole and dispersed at the lagging pole where the guanosine triphosphatase activating protein MglB disrupts the MglA–MreB interaction. Thus, MglA acts as a nucleotide-dependent molecular switch to regulate the motility machinery spatially. The function of MreB in motility is independent of its function in peptidoglycan synthesis, representing a coopted function. Our findings highlight a new function for the MreB cytoskeleton and suggest that G-protein–cytoskeleton interactions are a universally conserved feature.     

Bee1, a Yeast Protein with Homology to Wiscott-Aldrich Syndrome Protein, Is Critical for the Assembly of Cortical Actin Cytoskeleton

Yeast protein, Bee1, exhibits sequence homology to Wiskott-Aldrich syndrome protein (WASP), a human protein that may link signaling pathways to the actin cytoskeleton. Mutations in WASP are the primary cause of Wiskott-Aldrich syndrome, characterized by immuno-deficiencies and defects in blood cell morphogenesis. This report describes the characterization of Bee1 protein function in budding yeast. Disruption of BEE1 causes a striking change in the organization of actin filaments, resulting in defects in budding and cytokinesis. Rather than assemble into cortically associated patches, actin filaments in the buds of Δbee1 cells form aberrant bundles that do not contain most of the cortical cytoskeletal components. It is significant that Δbee1 is the only mutation reported so far that abolishes cortical actin patches in the bud. Bee1 protein is localized to actin patches and interacts with Sla1p, a Src homology 3 domain–containing protein previously implicated in actin assembly and function. Thus, Bee1 protein may be a crucial component of a cytoskeletal complex that controls the assembly and organization of actin filaments at the cell cortex.     

Method for the Detection of Injured Vibrio parahaemolyticus in Seafoods

The sensitivity of Vibrio parahaemolyticus cells to refrigeration and frozen storage and the development of a method for detecting injured and uninjured V. parahaemolyticus cells were studied. Cell suspensions in different kinds of seafood homogenates were either regrigerated (4°C) or frozen (−20°C), stored, and examined for cell survival during storage. V. parahaemolyticus cells were sensitive to both storage temperatures. Many cells died, and many survivors were sublethally injured. In general, refrigeration storage appeared to be more injurious than frozen storage. The initial recovery of the sublethally injured cells was highest in a nutritionally rich, nonselective liquid medium such as Trypticase soy broth, whereas maximum cell multiplication was observed in Trypticase soy broth containing 3% NaCl. The sublethally injured V. parahaemolyticus cells demonstrated sensitivity to the selective enrichment medium, glucose salt teepol broth. From these findings, a new method (designated as the “repair-detection” method) was developed for the isolation and enumeration of V. parahaemolyticus. Comparative studies between the recommended and the repair-detection methods showed that injured V. parahaemolyticus cells were present in commercial seafoods and that the repair-detection method was definitely more effective for the detection of total numbers of V. parahaemolyticus cells.     

The Bacterial Cytoskeleton Modulates Motility,Type 3 Secretion,and Colonization in Salmonella

Although there have been great advances in our understanding of the bacterial cytoskeleton, major gaps remain in our knowledge of its importance to virulence. In this study we have explored the contribution of the bacterial cytoskeleton to the ability of Salmonella to express and assemble virulence factors and cause disease. The bacterial actin-like protein MreB polymerises into helical filaments and interacts with other cytoskeletal elements including MreC to control cell-shape. As mreB appears to be an essential gene, we have constructed a viable ΔmreC depletion mutant in Salmonella. Using a broad range of independent biochemical, fluorescence and phenotypic screens we provide evidence that the Salmonella pathogenicity island-1 type three secretion system (SPI1-T3SS) and flagella systems are down-regulated in the absence of MreC. In contrast the SPI-2 T3SS appears to remain functional. The phenotypes have been further validated using a chemical genetic approach to disrupt the functionality of MreB. Although the fitness of ΔmreC is reduced in vivo, we observed that this defect does not completely abrogate the ability of Salmonella to cause disease systemically. By forcing on expression of flagella and SPI-1 T3SS in trans with the master regulators FlhDC and HilA, it is clear that the cytoskeleton is dispensable for the assembly of these structures but essential for their expression. As two-component systems are involved in sensing and adapting to environmental and cell surface signals, we have constructed and screened a panel of such mutants and identified the sensor kinase RcsC as a key phenotypic regulator in ΔmreC. Further genetic analysis revealed the importance of the Rcs two-component system in modulating the expression of these virulence factors. Collectively, these results suggest that expression of virulence genes might be directly coordinated with cytoskeletal integrity, and this regulation is mediated by the two-component system sensor kinase RcsC.     

Positioning of chemosensory proteins and FtsZ through the Rhodobacter sphaeroides cell cycle

Bacterial chemotaxis depends on signalling through large protein complexes. Each cell must inherit a complex on division, suggesting some co‐ordination with cell division. In Escherichia coli the membrane‐spanning chemosensory complexes are polar and new static complexes form at pre‐cytokinetic sites, ensuring positioning at the new pole after division and suggesting a role for the bacterial cytoskeleton. Rhodobacter sphaeroides has both membrane‐associated and cytoplasmic, chromosome‐associated chemosensory complexes. We followed the relative positions of the two chemosensory complexes, FtsZ and MreB in aerobic and in photoheterotrophic R. sphaeroides cells using fluorescence microscopy. FtsZ forms polar spots after cytokinesis, which redistribute to the midcell forming nodes from which FtsZ extends circumferentially to form the Z‐ring. Membrane‐associated chemosensory proteins form a number of dynamic unit‐clusters with mature clusters containing about 1000 CheW₃ proteins. Individual clusters diffuse randomly within the membrane, accumulating at new poles after division but not colocalizing with either FtsZ or MreB. The cytoplasmic complex colocalizes with FtsZ at midcells in new‐born cells. Before cytokinesis one complex moves to a daughter cell, followed by the second moving to the other cell. These data indicate that two homologous complexes use different mechanisms to ensure partitioning, and neither complex utilizes FtsZ or MreB for positioning.     

Bacterial actin MreB assembles in complex with cell shape protein RodZ

Bacterial actin homologue MreB is required for cell shape maintenance in most non‐spherical bacteria, where it assembles into helical structures just underneath the cytoplasmic membrane. Proper assembly of the actin cytoskeleton requires RodZ, a conserved, bitopic membrane protein that colocalises to MreB and is essential for cell shape determination. Here, we present the first crystal structure of bacterial actin engaged with a natural partner and provide a clear functional significance of the interaction. We show that the cytoplasmic helix‐turn‐helix motif of Thermotoga maritima RodZ directly interacts with monomeric as well as filamentous MreB and present the crystal structure of the complex. In vitro and in vivo analyses of mutant T. maritima and Escherichia coli RodZ validate the structure and reveal the importance of the MreB–RodZ interaction in the ability of cells to propagate as rods. Furthermore, the results elucidate how the bacterial actin cytoskeleton might be anchored to the membrane to help constrain peptidoglycan synthesis in the periplasm.     

Bacillus subtilis MreB orthologs self-organize into filamentous structures underneath the cell membrane in a heterologous cell system

Actin-like bacterial cytoskeletal element MreB has been shown to be essential for the maintenance of rod cell shape in many bacteria. MreB forms rapidly remodelling helical filaments underneath the cell membrane in Bacillus subtilis and in other bacterial cells, and co-localizes with its two paralogs, Mbl and MreBH. We show that MreB localizes as dynamic bundles of filaments underneath the cell membrane in Drosophila S2 Schneider cells, which become highly stable when the ATPase motif in MreB is modified. In agreement with ATP-dependent filament formation, the depletion of ATP in the cells lead to rapid dissociation of MreB filaments. Extended induction of MreB resulted in the formation of membrane protrusions, showing that like actin, MreB can exert force against the cell membrane. Mbl also formed membrane associated filaments, while MreBH formed filaments within the cytosol. When co-expressed, MreB, Mbl and MreBH built up mixed filaments underneath the cell membrane. Membrane protein RodZ localized to endosomes in S2 cells, but localized to the cell membrane when co-expressed with Mbl, showing that bacterial MreB/Mbl structures can recruit a protein to the cell membrane. Thus, MreB paralogs form a self-organizing and dynamic filamentous scaffold underneath the membrane that is able to recruit other proteins to the cell surface.     

Dynamic Mechanisms of the Bactericidal Action of an Al2O3-TiO2-Ag Granular Material on an Escherichia coli Strain

The bactericidal activity of an Al₂O₃-TiO₂-Ag granular material against an Escherichia coli strain was confirmed by a culture-based method. In particular, 100% of microorganisms were permanently inactivated in 30 to 45 min. The present work aimed to investigate the mechanisms of the bactericidal action of this material and their dynamics on Escherichia coli using different techniques. Observations by transmission electron microscopy (TEM) at different times of disinfection revealed morphological changes in the bacteria as soon as they were put in contact with the material. Notably highlighted were cell membrane damage; cytoplasm detachment; formation of vacuoles, possibly due to DNA condensation, in association with regions exhibiting different levels of electron density; and membrane lysis. PCR and flow cytometry analyses were used to confirm and quantify the observations of cell integrity. The direct exposure of cells to silver, combined with the oxidative stress induced by the reactive oxygen species (ROS) generated, was identified to be responsible for these morphological alterations. From the first 5 min of treatment with the Al₂O₃-TiO₂-Ag material, 98% of E. coli isolates were lysed. From 30 min, cell viability decreased to reach total inactivation, although approximately 1% of permeable E. coli cells and 1% of intact cells (10⁵ genomic units · ml⁻¹) were evidenced. This study demonstrates that the bactericidal effect of the material results from a synergic action of desorbed and supported silver. Supported silver was shown to generate the ROS evidenced.     

Mutations in cell elongation genes mreB,mrdA and mrdB suppress the shape defect of RodZ‐deficient cells

RodZ interacts with MreB and both factors are required to maintain the rod shape of Escherichia coli. The assembly of MreB into filaments regulates the subcellular arrangement of a group of enzymes that synthesizes the peptidoglycan (PG) layer. However, it is still unknown how polymerization of MreB determines the rod shape of bacterial cells. Regulatory factor(s) are likely to be involved in controlling the function and dynamics of MreB. We isolated suppressor mutations to partially recover the rod shape in rodZ deletion mutants and found that some of the suppressor mutations occurred in mreB. All of the mreB mutations were in or in the vicinity of domain IA of MreB. Those mreB mutations changed the property of MreB filaments in vivo. In addition, suppressor mutations were found in the periplasmic regions in PBP2 and RodA, encoded by mrdA and mrdB genes. Similar to MreB and RodZ, PBP2 and RodA are pivotal to the cell wall elongation process. Thus, we found that mutations in domain IA of MreB and in the periplasmic domain of PBP2 and RodA can restore growth and rod shape to ΔrodZ cells, possibly by changing the requirements of MreB in the process.     

Manipulating Each MreB of Bdellovibrio bacteriovorus Gives Diverse Morphological and Predatory Phenotypes

We studied the two mreB genes, encoding actinlike cytoskeletal elements, in the predatory bacterium Bdellovibrio bacteriovorus. This bacterium enters and replicates within other Gram-negative bacteria by attack-phase Bdellovibrio squeezing through prey outer membrane, residing and growing filamentously in the prey periplasm forming an infective “bdelloplast,” and septating after 4 h, once the prey contents are consumed. This lifestyle brings challenges to the Bdellovibrio cytoskeleton. Both mreB genes were essential for viable predatory growth, but C-terminal green fluorescent protein tagging each separately with monomeric teal-fluorescent protein (mTFP) gave two strains with phenotypic changes at different stages in predatory growth and development. MreB1-mTFP cells arrested growth early in bdelloplast formation, despite successful degradation of prey nucleoid. A large population of stalled bdelloplasts formed in predatory cultures and predation proceeded very slowly. A small proportion of bdelloplasts lysed after several days, liberating MreB1-mTFP attack-phase cells of wild-type morphology; this process was aided by subinhibitory concentrations of an MreB-specific inhibitor, A22. MreB2-mTFP, in contrast, was predatory at an almost wild-type rate but yielded attack-phase cells with diverse morphologies, including spherical, elongated, and branched, the first time such phenotypes have been described. Wild-type predatory rates were seen for all but spherical morphotypes, and septation of elongated morphotypes was achieved by the addition of A22.The predatory bacterium Bdellovibrio bacteriovorus shows novel filamentous growth within the periplasm of the Gram-negative prey bacterium on which it feeds. This study focuses on the cytoskeletal protein MreB and the role that two homologues of it play in B. bacteriovorus predatory or host-dependent (HD) growth. The HD B. bacteriovorus life cycle can be split into two phases: an attack phase and a growth phase (Fig. ​(Fig.1).1). The attack-phase B. bacteriovorus is a small free-swimming, highly motile cell within which replication has been arrested and which does not take up organic nutrients from the environment or grow extensively (24, 26). Once an attack-phase cell has collided with a suitable prey bacterium, B. bacteriovorus opens and squeezes through a small hole, formed in the outer membrane, using type IV pili to pull itself inside (7, 10). The B. bacteriovorus reseals the hole upon entering the periplasm. Once inside, the prey is killed rapidly within 15 min, and the prey cell wall is partially digested (35), forming a rounded structure called the bdelloplast (see Fig. ​Fig.11 and 4Ac and d). The HD B. bacteriovorus cell then enters the second, growth phase, part of the life cycle, (Fig. ​(Fig.1),1), whereby it grows filamentously while simultaneously coordinating the digestion and transportation of monomers from the prey cytoplasm. The mature growth-phase cell is multiploid and elongates typically 3 to 10 times the length of an attack-phase cell, its length being a reflection of the nutritional resources available in the prey (20). Once resources within the bdelloplast are depleted, the mature filament septates sequentially from one pole to form multiple progeny. These lyse the exhausted bdelloplast, mature into attack-phase cells, and repress growth once again (Fig. ​(Fig.1).1). B. bacteriovorus can be cultured slowly, without prey, as host-independent (HI) cells growing upon peptone-rich medium (30). In these conditions they grow pleiomorphically as mainly long filamentous or serpentine cells, from which some small attack-phase cells septate (30).Open in a separate windowFIG. 1.Schematic host-dependent (HD) predatory cycle for B. bacteriovorus on E. coli prey, showing the different phases of growth and inferred demands on the B. bacteriovorus cell cytoskeleton. References where the roles of the cytoskeleton in cell development have been proven for other bacteria are provided in parentheses. The status of the prey genome is both drawn from an earlier study (26) and confirmed by our work in the present study (see Fig. ​Fig.44).The predatory lifestyle of B. bacteriovorus presents a number of novel developmental challenges to the B. bacteriovorus cell and its cytoskeleton. It is not known how the attack-phase cells deform, allowing the B. bacteriovorus to squeeze through a pore it makes in the prey outer membrane that is narrower than the width of an attack-phase cell, as was imaged by Burnham et al. in the 1960s and more recently by Evans et al. (7, 10). It is also not known how the growth-phase filamentous cell within the bdelloplast is generated and remains resistant to division until terminal sequential septation begins, despite having multiple potential sites for septation along its length while elongating.The processes of cell elongation in rod-shaped bacteria are coordinated by an internal MreB cell cytoskeleton (9). MreB is a eukaryotic actin homologue and has been well studied in Escherichia coli, Bacillus subtilis, and Caulobacter crescentus (38). MreB monomers polymerize on ATP binding, forming helical structures in vivo that appear to associate with the cytoplasmic side of the bacterial cytoplasmic membrane (11, 18, 31). Bacterial two-hybrid experiments in Escherichia coli suggest that MreB forms a transmembrane complex with the two proteins MreC and MreD, each of which have been shown to form helical structures in vivo (21). A complex of MreBCD, together with the RodA protein, influences the shape of the peptidoglycan cell wall and thus the shape of the cell by positioning the peptidoglycan biosynthetic machinery so that its action is directionally specific (9, 19, 37). The MreB filament has also been shown to have roles in chromosome segregation, septation, and cell polarity (13, 14, 22, 37).Depletion of the MreB protein levels in E. coli and B. subtilis led to cells taking on a spherical morphology and eventual loss of viability since new peptidoglycan is not synthesized evenly along the cell wall (9, 36). Uneven incorporation of new peptidoglycan is potentially driven by the tubulin homologue FtsZ (4, 36). A similar phenotype is achieved by addition of the MreB inhibitor A22 that causes the reversible loss of MreB filament localization in vivo (14, 17). A22 was discovered in a chemical library being screened for the ability to generate anucleate minicells from E. coli (16, 17). It has been used extensively by others to examine MreB function in bacteria of many different genera. The addition of A22 to E. coli cells at 3.13 μg/ml leads to the breakdown of MreB filaments, spheroplasting and the generation of minicells (16). In B. subtilis, A22 at concentrations in excess of 100 μg/ml is required to generate spheroplasts; in C. crescentus 6-h incubations of A22 at 10 μg/ml are needed before any change to the cell shape can be observed—in this case cells take on a characteristic “lemon shape” (14, 16). Isolation and sequencing of A22-resistant mutants of C. crescentus, as well as biochemical evidence from purified MreB from Thermotoga maritima, revealed that A22 binds in the nucleotide binding pocket of MreB (3, 14). In vitro light scattering assays of MreB filamentation showed that A22 acted as a competitive inhibitor of ATP binding and was able in inhibit the formation of MreB filaments, presumably by sequestering and inactivating MreB monomers preventing their recycling (3). This study also demonstrated that in vitro A22 can have a role in stabilizing ADP-bound MreB (3).In the present study we investigated the functions of the two MreB homologues found in B. bacteriovorus, testing the role each has in predation and cell morphology by a combination of genetic approaches and A22 treatment. A reduction in function in both MreB proteins, achieved by C-terminal teal fluorescent protein (TFP) tagging, suggests that the MreB1 (Bd0211) protein was required in the growth-phase cell in bdelloplasts, whereas the MreB2 (Bd1737) protein is required later in the predatory process, for maintaining and allowing successful resolution of the growth-phase filament into short attack-phase vibroid cells.