Analysis of plasmid genome evolution based on nucleotide-sequence comparison of two related plasmids of Escherichia coli

Plasmid Rsc13, a small derivative of the plasmid R1, contains a region necessary for replication as well as a complete copy (4957 bp) of the ampicillin resistance transposon, Tn3. We determined the nucleotide sequence of the replication region of Rsc13 to be 2937 bp and then compared this region (designated the 2.9-kb region) to the analogous region of pSM1, a small derivative of the plasmid R100 which has common ancestry with R1. Rsc13 and pSM1 were 96% homologous in this 2.9-kb region except for a discrete region of about 250 bp which showed only 44% homology. The sequence and distribution of nucleotide substitutions between Rsc13 and pSM1 supported a map of possible genes and sites which have previously been seen in the replication region of Rsc13 and pSM1 which showed only 44% homology. Analysis of the amino acid sequence and predicted conformation of the two RepA2 polypeptides, however, suggested that they were very similar. We proposed that the repA2 region of R1 and R100 was replaced by a substitution of a short DNA segment from another plasmid which was evolutionarily related to R1 and R100 but had more divergence. This event may have been mediated by a mechanism similar to that of gene conversion as described in eukaryotic systems.     

Genes and sites involved in replication and incompatibility of an R100 plasmid derivative based on nucleotide sequence analysis

Summary The nucleotide sequence of the entire region required for autonomous replication and incompatibility of an R100 plasmid derivative, pSM1, has been determined. This region includes the replication region and all plasmid encoded information required for replication. Numerous reading frames for possible proteins can be found in this region. The existence of one of these proteins called RepA1 (285 amino acids; 33,000 daltons) which is encoded within the region known by cloning analysis to be required for replication is supported by several lines of evidence. These include an examination of the characteristic sequences on the proximal and distal ends of the coding region, a comparison of the sequence of the replication regions of pSM1 and the highly related R1 plasmid derivative Rsc13 as well as other biochemical and genetic evidence. The existence of two other proteins, RepA3 (64 amino acids; 7000 daltons) and RepA2 (103 amino acids; 11,400 daltons) is also consistent with most of the criteria mentioned above. However, the region encoding RepA3, which by cloning analysis is within the region responsible for both replication and incompatibility, has never been demonstrated to produce a 7,000 dalton polypeptide. Since a large secondary structure can be constructed in this region, it is possible that the region contains structure or other information that is responsible for incompatibility. RepA2, encoded entirely within the region identified by cloning analysis to be responsible for incompatibility but not for replication can be visualized in vivo and in vitro. However, the nucleotide sequence of the region encoding RepA2 is completely different in mutually incompatible plasmid derivatives of R1 and R100. It is therefore unlikely that RepA2 plays a major role in incompatibility. Thus, we predict that RepA1 is required to initiate DNA synthesis at the replication origin and that the region proximal to RepA1 either encodes a gene product or structure information that is responsible for incompatibility.     

The region essential for efficient autonomous replication of pSa in Escherichia coli

Summary Comparative analyses were made between plasmid pSa17, a deletion derivative of pSa that is capable of replicating efficiently in Escherichia coli and plasmid pSa3, a derivative that is defective for replication. By comparing the restriction maps of these two derivatives, the regions essential for replication and for stable maintenance of the plasmid were determined. A 2.5 kb DNA segment bearing the origin of DNA replication of pSa17 was sequenced. A 36 kDa RepA protein was encoded in the region essential for replication. Downstream of the RepA coding region was a characteristic sequence including six 17 bp direct repeats, the possible binding sites of RepA protein, followed by AT-rich and GC-rich sequences. Furthermore, an 8 bp incomplete copy of the 17 bp repeat was found in the promoter region of the repA gene. Based on the hypothesis that RepA protein binds to this partial sequence as well as to intact 17 bp sequences, an autoregulatory system for the synthesis of RepA protein may be operative. Another open reading frame (ORF) was found in the region required for the stability of the plasmid. The putative protein encoded in this ORF showed significant homology to several site-specific recombination proteins. A possible role of this putative protein in stable maintenance of the plasmid is discussed.     

Identification of replication and stability functions in the complete nucleotide sequence of plasmid pUH24 from the cyanobacterium Synechococcus sp. PCC 7942

The complete nucleotide sequence is presented for pUH24, the small plasmid of Synechococcus sp. PCC 7942. pUH24 consists of 7835bp and has a G+C content of 59%. The distribution of translation start and stop codons in the sequence allows 36 open reading frames that potentially encode polypeptides of 50 or more amino acids. We postulate that eight of these open reading frames are actual coding sequences. A region has been identified, by experiment, that contains two functions, designated pmaA and pmaB, involved in the segregational stability of the plasmid. The minimal region of pUH24 fully capable of supporting autonomous replication consists of a 3.6kb DNA fragment, which is almost entirely occupied by two overlapping genes most likely coding for essential replication proteins (repA and repB).     

Characterization and Sequence Analysis of the Replicator Region of the Novel Plasmid pALC1 from Paracoccus alcaliphilus

The replicator region of a low-copy-number plasmid, pALC1, of Paracoccus alcaliphilus JCM 7364 was cloned in a form of the minireplicon pALC100 (3.6 kb). The host range of the minireplicon embraces several species of genus Paracoccus, as well as Agrobacterium tumefaciens, Rhizobium leguminosarum, and Rhodobacter sphaeroides (all belonging to alpha-Proteobacteria), but not Escherichia coli. The complete nucleotide sequence of the replicator region (2276 bp) revealed the presence of one complete open reading frame coding for the 28.4-kDa protein (RepA) with similarity to replication proteins of plasmid pSW500 of Erwinia stewartii and pVS1 of Pseudomonas fluorescens. The iteron-like region was identified upstream of the repA gene and consisted of two clusters of repeated sequences (17 bp long) separated by a putative DnaA box. Analysis of the predicted amino acid sequence of two adjacent incomplete ORFs suggests the localization of repA between genes involved in conjugation (traG) and partitioning (parA) within the pALC1 genome.     

Structural and functional similarities between the replication region of the Yersinia virulence plasmid and the RepFIIA replicons.

We sequenced the minimum replication region of the virulence plasmid pYVe439-80 from a serogroup O:9 Yersinia enterocolitica. This sequence is 68% homologous on a 1,873-nucleotide stretch to the sequence of the RepFIIA replicon of the resistance plasmid R100. The sequence contains two open reading frames, repA and repB, encoding proteins of 33,478 and 9,568 daltons, respectively. The amino acid sequences of the two proteins are 77 and 55% identical, respectively, to proteins RepA1 and RepA2 of the R100 replicon. Analysis of minicells transformed with a copy number mutant demonstrated that the replication region of pYVe439-80 directs the synthesis of a 33-kilodalton protein. Disruption of repA, encoding this protein, abolished replication. Two regions of pYVe439-80 are 76 and 70% homologous, respectively, to the copy number control antisense RNA and to the origin of replication region of R100. A mutation introduced in the pYVe439-80 DNA corresponding to the R100 sequence encoding the copy number control antisense RNA resulted in an increase in copy number, indicating a functional homology between the two replicons.     

A point mutation in the core subunit gene of yeast mitochondrial RNA polymerase is suppressed by a high level of specificity factor MTF1

Analysis of a transcribed region in the mitochondrial genome of Oenothera revealed an open reading frame (ORF) of 577 codons (orf577) that is also conserved in carrot, here encoding a protein of 579 amino acids (orf579). RNA editing alters the mRNA sequence of orf577 in Oenothera with 46 C to U transitions, many of which improve sequence similarity with the homologous Marchantia gene orf509. The deduced polypeptides show significant similarity with the ccll-encoded protein involved in cytochrome c biogenesis in the photosynthetic bacterium Rhodobacter capsulatus. A highly conserved domain is also found in plastid ORFs, suggesting that these bacterial, chloroplast and mitochondrial genes encode polypeptides with analogous functions in assembly and maturation of cytochromes c.     

Molecular structure of the replication origin of a Bacillus amyloliquefaciens plasmid pFTB14

Summary The structure of a 1.5-kb DNA sequence that is necessary and sufficient for the replication of an 8.2-kb cryptic plasmid, pFTB14, isolated from a strain of Bacillus amyloliquefaciens has been characterized. The 1.5-kb DNA sequence contains an open reading frame, rep, stretching for 1017 bp, a promoter region for rep expression, and a possible replication origin for the plasmid upstream of the promoter. The rep product is trans-active and essential for plasmid replication. The predicted rep protein is a basic protein, as are the RepC protein of pT181, RepB of pUB110 and protein A of pC194 (all these found in staphylococci) and the protein of the R6K plasmid of Escherichia coli. The predicted rep protein has highly homologous amino acid sequences with protein A of pC194 and RepC of pUB110 throughout the protein molecule, but not with RepC of pT181, of R6K or protein RepH encoded by and iniating the replication of pC194.     

Unidirectional replication in Escherichia coli of three small plasmids derived from R factor R12

Replicating molecules of three small plasmids, pSM1, pSM2, and pSM3, were isolated from a CsCl density gradient containing ethidium bromide. These plasmids are all derived from R12, a mutant of NR1 (same as R100). By means of pulse-labeling experiments, the replicating forms were located at buoyant densities intermediate between those of the closed circular and open circular DNA bands. These molecules were analyzed by electron microscopy following digestion with restriction endonucleases. Digestion of pSM2 with EcoR1 and with HindIII revealed the presence of a single origin of replication located 1.72 kilobases (kb) from the EcoR1 cutting site (2.04 kb from the HindIII cutting site). These experiments also demonstrated that replication occurs in a unidirectional mode from the origin. Analysis of EcoR1-cleaved replicating molecules of pSM1 and pSM3, which carry common sequences completely or partly homologous to pSM2, provides further evidence for the unidirectional replication of these plasmids from a common origin. The site of the origin of replication was fixed at 85.5 on the kilobase map of R100. This origin, which is located in the RTF region, probably corresponds to one of the replication origins of R100.     

Nucleotide sequence analysis of the enterotoxigenic Escherichia coli Ent plasmid

We report here the complete nucleotide sequence of pEntH10407 (65 147 bp), an enterotoxigenic Escherichia coli enterotoxin plasmid (Ent plasmid), which is self-transmissible at low frequency. Within the plasmid, we identified 100 open reading frames (ORFs) which could encode polypeptides. These ORFs included regions encoding heat-labile (LT) and heat-stable (STIa) enterotoxins, regions encoding tools for plasmid replication and an incomplete tra (conjugation) region. The LT and STIa region was located 13.5 kb apart and was surrounded by three IS1s and an IS600 in opposite reading orientations, indicating that the enterotoxin genes may have been horizontally transferred into the plasmid. We identified a single RepFIIA replication region (2.0 kb) including RepA proteins similar to RepA1, RepA2, RepA3 and RepA4. The incomplete tra region was made up of 17 tra genes, which were nearly identical to the corresponding genes of R100, and showed evidence of multiple insertions of ISEc8 and ISEc8-like elements. These data suggest that pEntH10407 has the mosaic nature characteristic of bacterial virulence plasmids, which contains information about its evolution. Although the tra genes might originally have rendered pEntH10407 self-transferable to the same degree as R100, multiple insertion events have occurred in the tra region of pEntH10407 to make it less mobile. Another self-transmissible plasmid might help pEntH10407 to transfer efficiently into {"type":"entrez-nucleotide","attrs":{"text":"H10407","term_id":"875229","term_text":"H10407"}}H10407 strain. In this paper, we suggest another possibility: that the enterotoxigenic {"type":"entrez-nucleotide","attrs":{"text":"H10407","term_id":"875229","term_text":"H10407"}}H10407 strain might be formed by auto-transfer of pEntH10407 at a low rate using the incomplete tra region.     

A small plasmid, pCA2.4, from the cyanobacterium Synechocystis sp. strain PCC 6803 encodes a rep protein and replicates by a rolling circle mechanism.

Different cryptic plasmids are widely distributed in many strains of cyanobacteria. A small cryptic plasmid, pCA2.4, from Synechocystis strain PCC 6803 was completely sequenced, and its replication mode was determined. pCA2.4 contained 2,378 bp and encoded a replication (Rep) protein, designated RepA. An analysis of the deduced amino acid sequence revealed that RepA of pCA2.4 has significant homology with Rep proteins of pKYM from Shigella sonnei, a pUB110 plasmid family from gram-positive bacteria, and with a protein corresponding to an open reading frame in a Nostoc plasmid and open reading frame C of Plectonema plasmid pRF1. pKYM and pUB110 family plasmids replicate by a rolling circle mechanism in which a Rep protein nicks the origin of replication to allow the generation of a single-stranded plasmid as a replication intermediate. RepA encoded by pC2.4 was expressed in Escherichia coli cells harboring a vector, pCRP336, containing the entire repA gene. The observed molecular weight of RepA was consistent with the value of 39,200 calculated from its deduced amino acid sequence, as was the N-terminal sequence analysis done through the 12th residue. Single-stranded plasmid DNA of pCA2.4 that was specifically degraded by S1 nuclease was detected in Synechocystis cells by Southern hybridization. These observations suggest that pCA2.4 replicates by a rolling circle mechanism in Synechocystis cells.     

Oenothera mitochondrial orf454, a gene involved in cytochrome c biogenesis corresponds to orf169 and orf322 of Marchantia

We have characterized a mitochondrial gene in Oenothera, designated orf454, capable of encoding a component of the cytochrome c biogenesis system. This open reading frame is interrupted by an intron of 941 nucleotides showing high similarity to a group II intron residing in the rpl2 gene. RNA editing, which is observed at 18 cytidine positions within the orf454 reading frame, improves the similarity to protein-coding sequences in bacteria and higher plants and removes the last 16 amino acids. orf454 also shows high sequence similarity to two overlapping reading frames (orf169 and orf322) of Marchantia mitochondria. These ORFs belong to an operon-like cluster of genes in the liverwort that is not conserved in Oenothera mitochondria. However, in bacteria these reading frames are organized like the Marchantia gene cluster. It has been shown by genetical analysis in Rhodobacter capsulatus that these genes are essential for cytochrome c biogenesis. Genes of bacterial operons — ccl1 in Rhodobacter and yejR and nrfE in Escherichia coli — show high sequence similarity to the mitochondrial reading frames orf577 and orf454 of Oenothera. orf454, which we describe here, is homologous to the C-terminal region of these bacterial genes, while the previously described orf577 is homologous to the N-terminal region.     

Complete nucleotide sequence and structural organization of pPB1, a small Lactobacillus plantarum cryptic plasmid that originated by modular exchange

A small cryptic plasmid designated pPB1 was isolated from Lactobacillus plantarum BIFI-38 and its complete 2899 bp nucleotide sequence was determined. Sequence analysis revealed four putative open reading frames. Based on sequence analysis two modules could be identified. First, the replication module consisted of a sequence coding for a replication protein (RepB) and its corresponding target site, and two putative repressor proteins (RepA and RepC). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate RepB production. A putative lagging-strand initiation site was also found, suggesting that pPB1 replicates via a rolling circle mechanism. The second module of pPB1 consisted of a sequence coding for a putative mobilization protein and its corresponding oriT site. Since the nucleotide sequence of the replication module showed 94.5% identity to the similar region on the Leuconostoc lactis plasmid pCI411, and the nucleotide sequence of the mobilization module had 97.5% identity to L. plantarum plasmid pLB4, it is concluded that pPB1 originated by modular exchange between two such plasmids by homologous recombination. Putative recombination sites where crossover might have taken place were also identified.     

Nucleotide sequence of the trfA gene of broad host-range plasmid RK2

The nucleotide sequence of a 1622 base-pair segment of the broad host-range IncP plasmid RK2 (identical to RP1, RP4, R18 and R68) was determined. This region includes the trfA gene, encoding a trans-acting product essential for vegetative plasmid replication. The nucleotide sequence, together with the results described in the accompanying paper by Shingler & Thomas, indicates that the trfA gene encodes two polypeptide products (of 382 and 285 amino acids) by utilizing different translational start points within a single open reading frame. The region common to both trfA polypeptides includes a sequence with homology to a number of proteins that bind to double-stranded DNA. The trfA gene is preceded by another open reading frame, encoding a polypeptide of 116 amino acids of unknown function. Both cistrons are transcribed from a promoter outside the region of sequence reported here; however, much higher levels of the short polypeptide than of either of the trfA gene products are observed. Possible mechanisms for the control of the relative levels of the products of this operon are discussed, together with features of the trfA gene that may be important for its function in the diverse gram-negative bacterial species in which RK2 can be maintained.     

Identification and nucleotide sequence analysis of a cryptic plasmid,pRM21, from Rhodothermus marinus

Here we report the identification and nucleotide sequence analysis of pRM21, a plasmid isolated from the thermophilic eubacterium Rhodothermus marinus. pRM21 consists of 2935 bp, has a G+C content of 58.2% and one major open reading frame whose deduced product shows significant similarities to RepA proteins from several plasmids, the highest being to the RepA of pSa from Escherichia coli. A region with the characteristics of iteron-containing replicons, three 19 bp repeats, DnaA boxes, an A+T rich region and GATC sequences, was identified. Of 40 additional R. marinus strains screened for plasmids, six (15%) were found to harbour plasmids with the same size and restriction pattern as pRM21.