Affinity purification of immunoglobulins from chicken egg yolk using a new synthetic ligand

Due to the peculiar composition of the egg yolk and the lack of specific affinity ligands, Y immunoglobulins are normally purified using complex and time consuming procedures involving a combination of precipitation and chromatographic steps first to extract and capture and then to polish IgY. In this study, we have examined the applicability for IgY affinity purification of TG19318, a synthetic ligand for immunoglobulin, obtained from the screening of combinatorial libraries, and already characterized for its capability to purify immunoglobulins of class G, M, E and A. Soluble proteins were separated from the lipidic fraction of egg yolk by the water dilution method and loaded on to TG19318 affinity columns prepared by immobilizing the ligand on the commercially available support Emphaze™. In a single chromatographic step TG19318 affinity columns led to an efficient capture of IgY directly from crude samples, and with a purity degree higher than 90%, as determined by densitometric scanning of SDS–PAGE analysis of bound fractions, and with full recovery of antibody activity, as determined by ELISA assay. Higher recovery and purity of IgY was obtained by using loading buffers at pH close to 6.5. Column capacity, determined by applying 4× excess IgY to 1 ml bed volume column, and eluting the retained immunoglobulins, was close to 65 mg of IgY per ml of resin. Chemical and chromatographic stability of TG19318/Emphaze was tested before and after various treatments. The derivatized matrix was found to be very stable, in terms of ligand leakage and maintenance of IgY binding capacity, under conditions of normal column usage, cleaning and storage.     

Novel p16 binding peptide development for p16‐overexpressing cancer cell detection using phage display

Protein p^16INK4a (p16) is a well‐known biomarker for diagnosis of human papillomavirus (HPV) related cancers. In this work, we identify novel p16 binding peptides by using phage display selection method. A random heptamer phage display library was screened on purified recombinant p16 protein‐coated plates to elute only the bound phages from p16 surfaces. Binding affinity of the bound phages was compared with each other by enzyme‐linked immunosorbent assay (ELISA), fluorescence imaging technique, and bioinformatic computations. Binding specificity and binding selectivity of the best candidate phage‐displayed p16 binding peptide were evaluated by peptide blocking experiment in competition with p16 monoclonal antibody and fluorescence imaging technique, respectively. Five candidate phage‐displayed peptides were isolated from the phage display selection method. All candidate p16 binding phages show better binding affinity than wild‐type phage in ELISA test, but only three of them can discriminate p16‐overexpressing cancer cell, CaSki, from normal uterine fibroblast cell, HUF, with relative fluorescence intensities from 2.6 to 4.2‐fold greater than those of wild‐type phage. Bioinformatic results indicate that peptide ‘Ser‐His‐Ser‐Leu‐Leu‐Ser‐Ser’ binds to p16 molecule with the best binding score and does not interfere with the common protein functions of p16. Peptide blocking experiment shows that the phage‐displayed peptide ‘Ser‐His‐Ser‐Leu‐Leu‐Ser‐Ser’ can conceal p16 from monoclonal antibody interaction. This phage clone also selectively interacts with the p16 positive cell lines, and thus, it can be applied for p16‐overexpressing cell detection. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Selection and characterization of a 7‐mer peptide binding to divalent cations

A 7‐mer peptide (S‐T‐L‐P‐L‐P‐P) that bound to various divalent cations was selected from a phage display peptide library. Isothermal calorimetric analysis revealed that the peptide bound to Pb²⁺, Cd²⁺, Hg²⁺, and Cu²⁺. Through the use of CD studies, no secondary structural changes were observed for the peptide upon binding to divalent cations. Ala scanning mutant peptides bound to Hg²⁺ with a reduced affinity. However, no single substitution was shown to affect the overall affinity. We suggest that Pro residues chelate divalent cations, while the structure formed by the peptide is also important for the binding process. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Selection of ceramic fluorapatite‐binding peptides from a phage display combinatorial peptide library: optimum affinity tags for fluorapatite chromatography

Peptide affinity tags have become efficient tools for the purification of recombinant proteins from biological mixtures. The most commonly used ligands in this type of affinity chromatography are immobilized metal ions, proteins, antibodies, and complementary peptides. However, the major bottlenecks of this technique are still related to the ligands, including their low stability, difficulties in immobilization, and leakage into the final products. A model approach is presented here to overcome these bottlenecks by utilizing macroporous ceramic fluorapatite (CFA) as the stationary phase in chromatography and the CFA‐specific short peptides as tags. The CFA chromatographic materials act as both the support matrix and the ligand. Peptides that bind with affinity to CFA were identified from a randomized phage display heptapeptide library. A total of five rounds of phage selection were performed. A common N‐terminal sequence was found in two selected peptides: F4‐2 (KPRSMLH) and F5‐4 (KPRSVSG). The peptide F5‐4, displayed by more than 40% of the phages analyzed in the fifth round of selection, was subjected to further studies. Selectivity of the peptide for the chemical composition and morphology of CFA was assured by the adsorption studies. The dissociation constant, obtained from the F5‐4/CFA adsorption isotherm, was in the micromolar range, and the maximum capacity was 39.4 nmol/mg. The chromatographic behavior of the peptides was characterized on a CFA stationary phase with different buffers. Preferential affinity and specific retention properties suggest the possible application of the phage‐derived peptides as a tag in CFA affinity chromatography for enhancing the selective recovery of proteins. Copyright © 2013 John Wiley & Sons, Ltd.     

The specific binding of peptide ligands to cardiomyocytes derived from mouse embryonic stem cells

Purification of pluripotent stem cell (PSC)‐derived cardiomyocytes is critical for the application of cardiomyocytes both in clinical and basic research. Finding a specific cell marker is a promising method for purifying induced cells. The present study employed phage display technology to search for particular cell markers that could bind specifically to PSC‐derived cardiomyocytes. After three rounds of biopanning, several peptides were obtained. The ELISA results show the no. 3 sequence peptide (QPFTTSLTPPAR), and other four sequences having a consensus motif [SS(Q)PPQ(S)], no. 9, 11, 14, and 10, have relatively high affinity and specificity to cardiomyocytes. Immunofluorescence confirmed that the selected peptides could bind specifically to the PSC‐derived cardiomyocytes. Competition tests with chemically synthesized peptides revealed the binding ability was caused by the peptide itself. Western blot analysis proved the phages were both bound to two 17 kDa cardiomyocyte membrane proteins and the no. 9 sequence showed a 55 kDa protein that was not observed in the no. 3 sequence. These results suggest that the selected peptides specifically target receptors on PSC‐derived cardiomyocyte membranes. The results will pave the way for further studies of cell surface markers and their applications, such as labeling, purification, and as vehicles for drug delivery. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

mRNA display selection and solid‐phase synthesis of Fc‐binding cyclic peptide affinity ligands

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid‐phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on‐resin solid‐phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide—cyclo[Link‐M‐WFRHY‐K]—as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link‐M‐WFRHY‐K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link‐M‐WFRHY‐K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link‐M‐WFRHY‐K] is an attractive candidate for developing a cost‐effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest. Biotechnol. Bioeng. 2013; 110: 857–870. © 2012 Wiley Periodicals, Inc.     

Identification of peptide inhibitors of penicillinase using a phage display library

There is a constant need to identify novel inhibitors to combat β-lactamase-mediated antibiotic resistance. In this study, we identify three penicillinase-binding peptides, P1 (DHIHRSYRGEFD), P2 (NIYTTPWGSNWS), and P3 (SHSLPASADLRR), using a phage display library. Surface plasmon resonance (SPR) is utilized for quantitative determination and comparison of the binding specificity of selected peptides to penicillinase. An SPR biosensor functionalized with P3-GGGC (SHSLPASADLRRGGGC) is developed for detection of penicillinase with excellent sensitivity (15.8 RU nM⁻¹) and binding affinity (K_D = 0.56 nM). To determine if peptides can be good inhibitors for penicillinase, these peptides are mixed with penicillinase and their inhibition efficiency is determined by measuring the hydrolysis of substrate penicillin G using UV–vis spectrophotometry. Peptide P2 (NIYTTPWGSNWS) is found to be a promising penicillinase inhibitor with a K_i of 9.22 μM and a K_i′ of 33.12 μM, suggesting that the inhibition mechanism is a mixed pattern. This peptide inhibitor (P2) can be used as a lead compound to identify more potent small molecule inhibitors for penicillinase. This study offers a potential approach to both detection of β-lactamases and development of novel inhibitors of β-lactamases.     

The harnessing of peptide–monolith constructs for single step plasmid DNA purification

The availability of synthetic peptides has paved the way for their use in tailor-made interactions with biomolecules. In this study, a 16mer LacI-based peptide was used as an affinity ligand to examine the scale up feasibility for plasmid DNA purification. First, the peptide was designed and characterized for the affinity purification of lacO containing plasmid DNA, to be employed as a high affinity ligand for the potential capturing of plasmid DNA in a single unit operation. It was found there were no discernible interactions with a control plasmid that did not encode the lacO nucleotide sequence. The dissociation equilibrium constant of the binding between the 16mer peptide and target pUC19 was 5.0 ± 0.5 × 10⁻⁸ M as assessed by surface plasmon resonance. This selectivity and moderated affinity indicate that the 16mer is suitable for the adsorption and chromatographic purification of plasmid DNA. The suitability of this peptide was then evaluated using a chromatography system with the 16mer peptide immobilized to a customized monolith to purify plasmid DNA, obtaining preferential purification of supercoiled pUC19. The results demonstrate the applicability of peptide–monolith supports to scale up the purification process for plasmid DNA using designed ligands via a biomimetic approach.     

Peptide-based immunoadsorbents: Molecular grafting of IgG–Fc-binding epitopes of Protein A onto a de novo-designed helix-loop-helix peptide

The development of immunoadsorbents that have high specificity for immunoglobulin and no immunogenicity is essential for immunoadsorption treatment of autoimmune diseases. In this study, we designed peptide immunoadsorbents by molecular grafting of the IgG–Fc binding epitopes of Protein A onto a de novo-designed helix-loop-helix peptide. Linear (linG7A5) and cyclic (cyG7A5) grafted peptides were synthesized to test their binding affinity and specificity. Peptide cyG7A5 demonstrated high specificity for human IgG–Fc, with a K_D of 19 μM, and demonstrated no affinity to other plasma proteins, human serum albumin, or fibrinogen. To evaluate their immunoadsorbance efficiency, the grafted peptides and Protein A were conjugated to polyvinyl acetate resin and tested in a batch-wise process for adsorption removal of IgG from human plasma. The IgG capture capacities of the peptides correlated well with their binding affinities. Interestingly, cyG7A5 showed a higher binding specificity for IgG than did Protein A.     

Simple method to assess stability of immobilized peptide ligands against proteases

Although peptides are used as affinity chromatography ligands, they could be digested by proteases. Usually, peptide stability is evaluated in solution, which differs from the resin‐bounded peptide behavior. Furthermore, the study of the degradation products requires purification steps before analysis. Here, we describe an easy method to assess immobilized peptide stability. Sample peptides were synthesized on hydroxymethylbenzamide‐ChemMatrix resin. Peptidyl‐resin beads were then incubated with solutions containing proteases. Peptides were detached from the solid support with ammonia vapor and analyzed by matrix‐assisted laser desorption/ionization and electrospray ionization mass spectrometry, allowing the detection of the whole peptides as well as their C‐terminal degradation products. The method allowed a fast evaluation of peptide ligand stability in solid phase towards proteases that may be present in the crude sample before their use as ligands in affinity chromatography. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

A new FcεRI receptor‐mimetic peptide (PepE) that blocks IgE binding to its high affinity receptor and prevents mediator release from RBL 2H3 cells

We have recently reported on a class of IgE‐binding peptides designed based on the crystallographic structure of the high affinity FcεRI. Peptides contain receptor key residues located within the two distinct binding sites for IgE and selectively bind IgE with an affinity ranging between 6 and 60 µM . We have here designed and characterized a new molecule containing the receptor loops C′–E and B–C and an optimized linker for joining them made of a Lys side chain and a β‐Ala. This new peptide shows an increased affinity (around 30 times) compared to the parent loop C′–E + B–C previously described, while retaining the same two‐site mechanism of binding and the same selectivity. It also blocks the binding of IgE to the cell‐anchored receptor and efficiently prevents histamine release from mast cells. These properties make the peptide a useful scaffold for the development of new anti‐allergic drugs. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Rational design of peptide affinity ligands for the purification of therapeutic enzymes

Non‐mAb biologics represent a growing class of therapeutics under clinical development. Although affinity chromatography is a potentially attractive approach for purification, the development of platform technologies, such as Protein A for mAbs, has been challenging due to the inherent chemical and structural diversity of these molecules. Here, we present our studies on the rapid development of peptide affinity ligands for the purification of biologics using a prototypical enzyme therapeutic in clinical use. Employing a suite of de novo rational and combinatorial design strategies we designed and screened a library of peptides on microarray platforms for their ability to bind to the target with high affinity and selectivity in cell culture fluid. Lead peptides were evaluated on resin in batch conditions and compared with a commercially available resin to evaluate their efficacy. Two lead candidates identified from microarray studies provided high binding capacity to the target while demonstrating high selectivity against culture contaminants and product variants compared to a commercial resin system. These findings provide a proof‐of‐concept for developing affinity peptide‐based bioseparations processes for a target biologic. Peptide affinity ligand design and screening approaches presented in this work can also be easily translated to other biologics of interest. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:987–998, 2018     

Osteogenic properties of a short BMP‐2 chimera peptide

Bone morphogenetic proteins (BMPs) play a key role in bone and cartilage formation. For these properties, BMPs are employed in the field of tissue engineering to induce bone regeneration in damaged tissues. To overcome drawbacks due to the use of entire proteins, synthetic peptides derived from their parent BMPs have come out as promising molecules for biomaterial design. On the structural ground of the experimental BMP‐2 receptor complexes reported in the literature, we designed three peptides, reproducing the BMP‐2 region responsible for the binding to the type II receptor, ActRIIB. These peptides were characterized by NMR, and the structural features of the peptide–receptor binding interface were highlighted by docking experiments. Peptide–receptor binding affinities were analyzed by means of ELISA and surface plasmon resonance techniques. Furthermore, cellular assays were performed to assess their osteoinductive properties. A chimera peptide, obtained by combining the sequence portions 73–92 and 30–34 of BMP‐2, shows the best affinity for ActRIIB in the series and represents a good starting point for the design of new compounds able to reproduce osteogenic properties of the parent BMP‐2. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

Generation and refinement of peptide mimetic ligands for paratope-specific purification of monoclonal antibodies

Paratope-specific purification of antibodies has distinct advantages over conventional methods of antibody purification with respect to its capacity to isolate product of high purity and immunoreactivity. The present report addresses the problems of identifying peptide ligands for the purification of antibodies reactive with nonprotein antigens. Using an anti-steroid antibody as the model, a lead sequence that bound antibody was identified from a peptide phage display library. The minimum binding unit in this sequence was deduced using a series of truncated peptides synthesized on the heads of polyethylene pins. Replacement Net analysis of the minimum binding unit identified peptides with increased affinity for the antibody. The affinity-matured peptide mimotope bound antibody in solution. By molecular modeling the peptide was superimposable onto estrone-3-glucuronide localized in the crystal structure of the antibody binding pocket. In order to resolve problems of presentation posed by the reversal of orientation of the peptide on the affinity matrix compared with the pins, the mimotope peptide was synthesized in reverse sequence using d-amino acids. The resulting affinity matrix was effective for the purification of antibody. Eluted product demonstrated molecular homogeneity and high immunoreactivity. It is concluded that the combination of biological and chemical library techniques described provides a method for the generation and affinity maturation of mimotopes for antibodies against nonprotein antigens.     

Single-step purification of a small non-mAb biologic by peptide-ELP-based affinity precipitation

Affinity precipitation using stimulus-responsive biopolymers such as elastin-like polypeptides (ELPs) have been successfully employed for the purification of monoclonal antibodies. In the current work, we extend these studies to the development of an ELP-peptide fusion for the affinity precipitation of the therapeutically relevant small non-mAb biologic, AdP. A 12-mer affinity peptide ligand (P10) was identified by a primary phage biopanning followed by a secondary in-solution fluorescence polarization screen. Peptide P10 and AdP interacted with a K_D of 19.5 µM. A fusion of P10 with ELP was then shown to be successful in selectively capturing the biologic from a crude mixture. While pH shifts alone were not sufficient for product elution, the use of pH in concert with fluid-phase modifiers such as NaCl, arginine, or ethylene glycol was effective. In particular, the use of pH 8.5 and an arginine concentration of 500 mM enabled >80% product recovery. The overall process performance evaluated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and reversed-phase ultra-performance liquid chromatography analyses indicated successful single-step purification of the biologic from an Escherichia coli lysate resulting in ∼90% purity and >80% recovery. These results demonstrate that phage display can be readily employed to identify a peptide ligand capable of successfully carrying out the purification of a non-antibody biological product using ELP-based affinity precipitation.     

Dipalmitoylation of a cellular uptake-mediating apolipoprotein E-derived peptide as a promising modification for stable anchorage in liposomal drug carriers

Liposomes equipped with cellular uptake-mediating peptidic vector compounds have attracted much attention as target-specific drug delivery systems. Aside from the development of the target recognition motif itself, vector coupling to liposomes while conserving the active conformation constitutes an important element in carrier development. To elucidate the most efficient way for adsorptive peptide binding to liposomes, we synthesized and characterized two-domain peptides comprising a cationic sequence derived from the binding domain of apolipoprotein E (apoE) for the low-density lipoprotein receptor and different lipid-binding motifs, that is, an amphipathic helix, a transmembrane helix, single fatty acids or two palmitoyl chains. Peptide properties considered relevant for peptide-liposome complexes to initiate an endocytotic cellular uptake such as lipid binding, helicity, stability of anchorage, bilayer-disturbing activity, and toxicity showed that the dipalmitoyl derivative was the most suitable to associate the apoE peptide to the surface of liposomes. The peptide showed pronounced lipid affinity and was stably anchored within the lipid bilayer on a time scale of at least 30 min. The helicity of about 40% in the lipid-bound state and the location of the amphipathic helix on the liposomal surface provided the prerequisites for interaction of the complex with the cell surface-located receptor. The concentration of the dipalmitoylated peptide to permeabilize neutral lipid bilayers (lipid concentration 25 μM) was 0.06 μM and a 2 μM concentration reduced cell viability to about 80%. Efficient internalization of liposomes bearing about 180 peptide derivatives on the surface into brain capillary endothelial cells was monitored by confocal laser scanning microscopy. The concept of complexation using dipalmitoylated peptides may offer an efficient substitute to covalent vector coupling and a prospective way to optimize the capacity of liposomes as drug delivery systems also for different targets.     

Purification of a peptide tagged protein via an affinity chromatographic process with underivatized silica

Silica is widely used for chromatography resins due to its high mechanical strength, column efficiency, easy manufacturing (i.e. controlled size and porosity), and low‐cost. Despite these positive attributes to silica, it is currently used as a backbone for chromatographic resins in biotechnological downstream processing. The aim of this study is to show how the octapeptide (RH)4 can be used as peptide tag for high‐purity protein purification on bare silica. The tag possesses a high affinity to deprotonated silanol groups because the tag''s arginine groups interact with the surface via an ion pairing mechanism. A chromatographic workflow to purify GFP fused with (RH)4 could be implemented. Purities were determined by SDS‐PAGE and RP‐HPLC. The equilibrium binding capacity of the fusion protein GFP‐(RH)4 on silica is 450 mg/g and the dynamic binding capacity around 3 mg/mL. One‐step purification from clarified lysate achieved a purity of 93% and a recovery of 94%. Overloading the column enhances the purity to >95%. Static experiments with different buffers showed variability of the method making the system independent from buffer choice. Our designed peptide tag allows bare silica to be utilized in preparative chromatography for downstream bioprocessing; thus, providing a cost saving factor regarding expensive surface functionalization. Underivatized silica in combination with our (RH)4 peptide tag allows the purification of proteins, in all scales, without relying on complex resins.     

Screening and identification of a specific peptide binding to hepatocellular carcinoma cells from a phage display peptide library

To screen and identify the novel probe markers binding hepatocellular carcinoma specifically and sensitively, a phage‐displayed 12‐mer peptide library was used to make biopanning with the modified protocols on HepG2 cells. After four rounds of panning, the consensus sequences were obtained, and the PC28, a phage clone with most specific and sensitive binding to HepG2 cells, was identified as the best positive clone. The peptide probe HCSP4 (sequence SLDSTHTHAPWP) was synthesized based on the sequencing result of PC28. The specificity and sensitivity of HCSP4 were primarily analyzed using immunofluorescence, flow cytometry, and other methods. The results show that HCSP4 can bind to hepatocellular carcinoma cells with satisfactory specificity and sensitivity. It may be a promising lead candidate for molecular imaging and targeted drug delivery in the diagnosis and therapy of hepatocellular carcinoma. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

A switchable stapled peptide

The O‐N acyl transfer reaction has gained significant popularity in peptide and medicinal chemistry. This reaction has been successfully applied to the synthesis of difficult sequence‐containing peptides, cyclic peptides, epimerization‐free fragment coupling and more recently, to switchable peptide polymers. Herein, we describe a related strategy to facilitate the synthesis and purification of a hydrophobic stapled peptide. The staple consists of a serine linked through an amide bond formed from its carboxylic acid function and the side chain amino group of diaminopropionic acid and through an ester bond formed from its amino group and the side chain carboxylic acid function of aspartic acid. The α‐amino group of serine was protonated during purification. Interestingly, when the peptide was placed at physiological pH, the free amino group initiated the O‐N shift reducing the staple length by one atom, leading to a more hydrophobic stapled peptide. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Molecular design and optimization of hepatic cancer SLP76‐derived PLCγ1 SH3‐binding peptide with the systematic N‐substitution of peptide PXXP motif

The phospholipase Cγ1 (PLCγ1) is essential for T‐cell signaling and activation in hepatic cancer immune response, which has a regulatory Src homology 3 (SH3) domain that can specifically recognize and interact with the PXXP‐containing decapeptide segment (¹⁸⁵QP P VP P QRPM¹⁹⁴, termed as SLP76^185–194 peptide) of adaptor protein SLP76 following T‐cell receptor ligation. The isolated peptide can only bind to the PLCγ1 SH3 domain with a moderate affinity due to lack of protein context support. Instead of the traditional natural residue mutagenesis that is limited by low structural diversity and shifted target specificity, we herein attempt to improve the peptide affinity by replacing the two key proline residues Pro187 and Pro190 of SLP76^185–194 PXXP motif with nonnatural N‐substituted amino acids, as the proline is the only endogenous N‐substituted amino acid. The replacement would increase peptide flexibility but can restore peptide activity by establishing additional interactions with the domain. Structural analysis reveals that the domain pocket can be divided into a large amphipathic region and a small negatively charged region; they accommodate hydrophobic, aromatic, polar, and moderate‐sized N‐substituted amino acid types. A systematic replacement combination profile between the peptide residues Pro187 and Pro190 is created by structural modeling, dynamics simulation, and energetics analysis, from which six improved and two reduced N‐substituted peptides as well as native SLP76^185–194 peptide are identified and tested for their binding affinity to the recombinant protein of the human PLCγ1 SH3 domain using fluorescence‐based assays. Two N‐substituted peptides, SLP76^185–194(N‐Leu187/N‐Gln190) and SLP76^185–194(N‐Thr187/N‐Gln190), are designed to have high potency (K_d = 0.67 ± 0.18 and 1.7 ± 0.3 μM, respectively), with affinity improvement by, respectively, 8.5‐fold and 3.4‐fold relative to native peptide (K_d = 5.7 ± 1.2 μM).