Synthesis and properties of Asante Calcium Red—A novel family of long excitation wavelength calcium indicators

Although many synthetic calcium indicators are available, a search for compounds with improved characteristics continues. Here, we describe the synthesis and properties of Asante Calcium Red-1 (ACR-1) and its low affinity derivative (ACR-1-LA) created by linking BAPTA to seminaphthofluorescein. The indicators combine a visible light (450–540 nm) excitation with deep-red fluorescence (640 nm). Upon Ca²⁺ binding, the indicators raise their fluorescence with longer excitation wavelengths producing higher responses. Although the changes occur without any spectral shifts, it is possible to ratio Ca²⁺-dependent (640 nm) and quasi-independent (530 nm) emission when using visible (<490 nm) or multiphoton (∼780 nm) excitation. Therefore, both probes can be used as single wavelength or, less dynamic, ratiometric indicators. Long indicator emission might allow easy [Ca²⁺]_i measurement in GFP expressing cells. The indicators bind Ca²⁺ with either high (K_d = 0.49 ± 0.07 μM; ACR-1) or low affinity (K_d = 6.65 ± 0.13 μM; ACR-1-LA). Chelating Zn²⁺ (K_d = 0.38 ± 0.02 nM) or Mg²⁺ (K_d ∼ 5 mM) slightly raises and binding Co²⁺ quenches dye fluorescence. New indicators are somewhat pH-sensitive (pK_a = 6.31 ± 0.07), but fairly resistant to bleaching. The probes are rather dim, which combined with low AM ester loading efficiency, might complicate in situ imaging. Despite potential drawbacks, ACR-1 and ACR-1-LA are promising new calcium indicators.     

Simultaneous true, gated, and coupled electron-transfer reactions and energetics of protein rearrangement

Cytochromes c₆ and f react by three et mechanisms under similar conditions. We report temperature and viscosity effects on the protein docking and kinetics of ³Zncyt c₆ + cyt f(III) → Zncyt c₆⁺ + cyt f(II). At 0.5-40.0 °C, this reaction occurs within the persistent (associated) diprotein complex with the rate constant k^pr and within the transient (collision) complex with the rate constant k^tr. The viscosity independence of k^pr, the donor-acceptor coupling H_ab = (0.5 ± 0.1) cm⁻¹, and reorganizational energy λ = (2.14 ± 0.02) eV indicate true et within the persistent complex. The viscosity dependence of k^tr and a break at 30 °C in the Eyring plot for k^tr reveal mechanisms within the transient complex that are reversibly switched by temperature change. Kramers protein friction parameters differ much for the reactions below (σ = 0.3 ± 0.1, δ = 0.85 ± 0.07) and above (σ = 4.0 ± 0.9, δ = 0.40 ± 0.06) 30 °C. The transient complex(es) undergo(es) coupled et below ca. 30 °C and gated et above ca. 30 °C. Brownian dynamics simulations reveal two broad, dynamic ensembles of configurations “bridged” by few intermediate configurations through which the interconversion presumably occurs.     

Morphological and physiological adaptive traits of Mediterranean narrow endemic plants: The case of Centaurea gymnocarpa (Capraia Island,Italy)

A case study on Centaurea gymnocarpa Moris & De Not., a narrow endemic species, was carried out by analyzing its morphological, anatomical, and physiological traits in response to natural habitat stress factors under Mediterranean climate conditions. The results underline that the species is particularly adapted to the environment where it naturally grows. At the plant level, the above-ground/below-ground dry mass (1.73 ± 0.60) shows its investment predominately in the above-ground structure with a resulting total leaf area per plant of 1399 ± 94 cm². The senescent attached leaves at the base of the plant contribute to limit leaf transpiration by shading soil around the plant. Moreover, the dense C. gymnocarpa leaf pubescence, leaf rolling, the relatively high leaf mass area (LMA = 12.3 ± 1.3 mg cm⁻²) and leaf tissue density (LTD = 427 ± 44 mg cm⁻³) contribute to limit leaf transpiration, also postponing leaf death under dry conditions. At the physiological level, a relatively low respiration/photosynthesis ratio (R/P_N) in spring results from high R [2.26 ± 0.59 μmol (CO₂) m⁻² s⁻¹] and P_N [12.3 ± 1.5 μmol (CO₂) m⁻² s⁻¹]. The high photosynthetic nitrogen use efficiency [PNUE = 15.5 ± 0.4 μmol (CO₂) g⁻¹ (N) s⁻¹] shows the large amount of nitrogen (N) invested in the photosynthetic machinery of new leaves, associated to a high chlorophyll content (Chl = 35 ± 5 SPAD units). On the contrary, the highest R/P_N ratio (1.75 ± 0.19) in summer is due to a significant P_N decrease and increase of R in response to drought. The low PNUE [1.5 ± 0.2 μmol (CO₂) g⁻¹ (N) s⁻¹] in this season is indicative of a greater N investment in leaf cell walls which may contribute to limit transpiration. On the contrary, the low R/P_N ratio (0.05 ± 0.02) in winter is resulting from the limited enzyme activity of the respiratory apparatus [R = 0.23 ± 0.08 μmol (CO₂) m⁻² s⁻¹] while the low PNUE [3.5 ± 0.2 μmol (CO₂) g⁻¹ (N) s⁻¹] suggests that low temperatures additionally limit plant production. The experiment of the imposed water stress confirms that the C. gymnocarpa growth capability is in conformity with the severe conditions of its natural habitat, likewise as it may be the case with others narrow endemic species that have occupied niches with similar extreme conditions.     

Spectrophotometric determination of formation constants for the Cu-ethylenediamine-halogen (chloride and bromide) system and their catalytic effect on the oxidative coupling of 2,6-di-tert-butyl-phenol

In order to explain the mechanism of the dimerization of 2,6-di-tert-butyl-phenol when catalyzed by the copper-ethylenediamine complexes, a spectrophotometric study of the speciation of copper(II) complexes in methanol of Cu(II), ethylendiamine and Cl⁻ or Br⁻ was carried out at 303 K. The formation constants obtained for the copper chloride system are: log β₁₀₁ = 2.90 ± 0.03, log β₁₀₂ = 6.39 ± 0.03 and log β₁₀₃ = 8.62 ± 0.04, for the copper bromide system are log β₁₀₁ = 3.01 ± 0.10, log β₁₀₂ = 5.50 ± 0.08, for the copper-ethylendiamine complexes are log β₁₁₀ = 6.13 ± 0.05 and log β₁₂₀ = 10.54 ± 0.08, and for the ternary copper-ethylenediamine chloride or bromide systems are log β₁₁₁ = 10.21 ± 0.03 and log β₁₁₁ = 10.07 ± 0.03, respectively. Knowing the speciation of the copper-ethylenediamine-halide systems, the kinetic studies can be correlated with the species in solution. Comparative studies of the oxidation reaction of 2,6-di-tert-butyl-phenol using different copper(II) complexes with chloride or bromide and ethylenediamine as catalyst are reported. Their catalytic activity in the oxidation of 2,6-di-tert-butyl-phenol was monitored in methanol solution, following the corresponding quinone formation, at 418 nm (ε = 3.95 × 10⁴ mol⁻¹ L cm⁻¹ at 303 K). The results indicate that the most active species are [Cu(en)X]⁺, where X is bromide or chloride, Both complexes have similar activity.     

Kinetic study of dissociation of Eu(III) complex with H8dotp (H8dotp = 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetrakis(methylphosphonic acid))

The dissociation kinetics of the europium(III) complex with H₈dotp ligand was studied by means of molecular absorption spectroscopy in UV region at ionic strength 3.0 mol dm⁻³ (Na,H)ClO₄ and in temperature region 25-60 °C. Time-resolved laser-induced fluorescence spectroscopy (TRLIFS) was employed in order to determine the number of water molecules in the first coordination sphere of the europium(III) reaction intermediates and the final products. This technique was also utilized to deduce the composition of reaction intermediates in course of dissociation reaction simultaneously with calculation of rate constants and it demonstrates the elucidation of intimate reaction mechanism. The thermodynamic parameters for the formation of kinetic intermediate (ΔH⁰ = 11 ± 3 kJ mol⁻¹, ΔS⁰ = 41 ± 11 J K⁻¹ mol⁻¹) and the activation parameters (E_a = 69 ± 8 kJ mol⁻¹, ΔH^≠ = 67 ± 8 kJ mol⁻¹, ΔS^≠ = −83 ± 24 J K⁻¹ mol⁻¹) for the rate-determining step describing the complex dissociation were determined. The mechanism of proton-assisted reaction was proposed on the basis of the experimental data.     

Complexation study of europium(III) and curium(III) with urea in aqueous solution investigated by time-resolved laser-induced fluorescence spectroscopy

The complex formation of europium(III) and curium(III) with urea in aqueous solution has been studied at I = 0.1 M (NaClO₄), room temperature and trace metal concentrations in the pH-range of 1-8 at various ligand concentrations using time-resolved laser-fluorescence spectroscopy. While for curium(III) the luminescence maximum is red shifted upon complexation, in case of europium(III) emission wavelengths remain unaltered but a significant change in peak splitting occurs. Both heavy metals form weak complexes of the formulae ML³⁺ and MLOH²⁺ with urea. Stability constants were determined to be log β₁₁₀ = −0.12 ± 0.05 and log β_11-1 = −6.86 ± 0.15 for europium(III) and log β₁₁₀ = −0.28 ± 0.12 and log β_11-1 = −7.01 ± 0.15 for curium(III).     

Ibuprofen modulates allosterically NO dissociation from ferrous nitrosylated human serum heme-albumin by binding to three sites

Human serum albumin (HSA) is a monomeric allosteric protein. Here, the effect of ibuprofen on denitrosylation kinetics (k_off) and spectroscopic properties of HSA-heme-Fe(II)-NO is reported. The k_off value increases from (1.4 ± 0.2) × 10⁻⁴ s⁻¹, in the absence of the drug, to (9.5 ± 1.2) × 10⁻³ s⁻¹, in the presence of 1.0 × 10⁻² M ibuprofen, at pH 7.0 and 10.0 °C. From the dependence of k_off on the drug concentration, values of the dissociation equilibrium constants for ibuprofen binding to HSA-heme-Fe(II)-NO (K₁ = (3.1 ± 0.4) × 10⁻⁷ M, K₂ = (1.7 ± 0.2) × 10⁻⁴ M, and K₃ = (2.2 ± 0.2) × 10⁻³ M) were determined. The K₃ value corresponds to the value of the dissociation equilibrium constant for ibuprofen binding to HSA-heme-Fe(II)-NO determined by monitoring drug-dependent absorbance spectroscopic changes (H = (2.6 ± 0.3) × 10⁻³ M). Present data indicate that ibuprofen binds to the FA3-FA4 cleft (Sudlow’s site II), to the FA6 site, and possibly to the FA2 pocket, inducing the hexa-coordination of HSA-heme-Fe(II)-NO and triggering the heme-ligand dissociation kinetics.     

Substrate water exchange in photosystem II core complexes of the extremophilic red alga Cyanidioschyzon merolae

The binding affinity of the two substrate–water molecules to the water-oxidizing Mn₄CaO₅ catalyst in photosystem II core complexes of the extremophilic red alga Cyanidioschyzon merolae was studied in the S₂ and S₃ states by the exchange of bound ¹⁶O-substrate against ¹⁸O-labeled water. The rate of this exchange was detected via the membrane-inlet mass spectrometric analysis of flash-induced oxygen evolution. For both redox states a fast and slow phase of water-exchange was resolved at the mixed labeled m/z 34 mass peak: k_f = 52 ± 8 s^− 1 and k_s = 1.9 ± 0.3 s^− 1 in the S₂ state, and k_f = 42 ± 2 s^− 1 and k_slow = 1.2 ± 0.3 s^− 1 in S₃, respectively. Overall these exchange rates are similar to those observed previously with preparations of other organisms. The most remarkable finding is a significantly slower exchange at the fast substrate–water site in the S₂ state, which confirms beyond doubt that both substrate–water molecules are already bound in the S₂ state. This leads to a very small change of the affinity for both the fast and the slowly exchanging substrates during the S₂ → S₃ transition. Implications for recent models for water-oxidation are briefly discussed.     

Expression and characterization of PhzE from P. aeruginosa PAO1: aminodeoxyisochorismate synthase involved in pyocyanin and phenazine-1-carboxylate production

PhzE from Pseudomonas aeruginosa catalyzes the first step in the biosynthesis of phenazine-1-carboxylic acid, pyocyanin, and other phenazines, which are virulence factors for Pseudomonas species. The reaction catalyzed converts chorismate into aminodeoxyisochorismate using ammonia supplied by a glutamine amidotransferase domain. It has structural and sequence homology to other chorismate-utilizing enzymes such as anthranilate synthase, isochorismate synthase, aminodeoxychorismate synthase, and salicylate synthase. Like these enzymes, it is Mg^2 + dependent and catalyzes a similar S_N2" nucleophilic substitution reaction. PhzE catalyzes the addition of ammonia to C2 of chorismate, as does anthranilate synthase, yet unlike anthranilate synthase it does not catalyze elimination of pyruvate from enzyme-bound aminodeoxyisochorismate. Herein, the cloning of the phzE gene, high level expression of active enzyme in E. coli, purification, and kinetic characterization of the enzyme is presented, including temperature and pH dependence. Steady-state kinetics give K_chorismate = 20 ± 4 μM, K_Mg^2 + = 294 ± 22 μM, K_L-gln = 11 ± 1 mM, and k_cat = 2.2 ± 0.2 s^− 1 for a random kinetic mechanism. PhzE can use NH₄⁺ as an alternative nucleophile, while Co^2 + and Mn^2 + are alternative divalent metals.     

Lactose Binding to Galectin-1 Modulates Structural Dynamics, Increases Conformational Entropy, and Occurs with Apparent Negative Cooperativity

Galectins are a family of lectins with a conserved carbohydrate recognition domain that interacts with β-galactosides. By binding cell surface glycoconjugates, galectin-1 (gal-1) is involved in cell adhesion and migration processes and is an important regulator of tumor angiogenesis. Here, we used heteronuclear NMR spectroscopy and molecular modeling to investigate lactose binding to gal-1 and to derive solution NMR structures of gal-1 in the lactose-bound and unbound states. Structure analysis shows that the β-strands and loops around the lactose binding site, which are more open and dynamic in the unbound state, fold in around the bound lactose molecule, dampening internal motions at that site and increasing motions elsewhere throughout the protein to contribute entropically to the binding free energy. CD data support the view of an overall more open structure in the lactose-bound state. Analysis of heteronuclear single quantum coherence titration binding data indicates that lactose binds the two carbohydrate recognition domains of the gal-1 dimer with negative cooperativity, in that the first lactose molecule binds more strongly (K₁ = 21 ± 6 × 10³ M^− 1) than the second (K₂ = 4 ± 2 × 10³ M^− 1). Isothermal calorimetry data fit using a sequential binding model present a similar picture, yielding K₁ = 20 ± 10 × 10³ M^− 1 and K₂ = 1.67 ± 0.07 × 10³ M^− 1. Molecular dynamics simulations provide insight into structural dynamics of the half-loaded lactose state and, together with NMR data, suggest that lactose binding at one site transmits a signal through the β-sandwich and loops to the second binding site. Overall, our results provide new insight into gal-1 structure-function relationships and to protein-carbohydrate interactions in general.     

Cyanide and chloride exchange on homoleptic gold(III) square-planar complexes: variable pressure kinetic investigation by heteronuclear NMR

Kinetic studies of X⁻ exchange on [AuX₄]⁻ square-planar complexes (where X=Cl⁻ and CN⁻) were performed at acidic pH in the case of chloride system and as a function of pH for the cyanide one. Chloride NMR study (330-365 K) gives a second-order rate law on [AuCl₄]⁻ with the kinetic parameters: (k₂^Au,Cl)²⁹⁸=0.56±0.03 s⁻¹ mol⁻¹ kg; ΔH₂^‡ Au,Cl=65.1±1 kJ mol⁻¹; ΔS₂^‡ Au,Cl=−31.3±3 J mol⁻¹ K⁻¹ and ΔV₂^‡ Au,Cl=−14±2 cm³ mol⁻¹. The variable pressure data clearly indicate the operation of an I_a or A mechanism for this exchange pathway. The proton exchange on HCN was determined by ¹³C NMR as a function of pH and the rate constant of the three reaction pathways involving H₂O, OH⁻ and CN⁻ were determined: k₀^HCN,H=113±17 s⁻¹, k₁^HCN,H=(2.9±0.7)×10⁹ s⁻¹ mol⁻¹ kg and k₂^HCN,H=(0.6±0.2)×10⁶ s⁻¹ mol⁻¹ kg at 298.1 K. The rate law of the cyanide exchange on [Au(CN)₄]⁻ was found to be second order with the following kinetic parameters: (k₂^Au,CN)²⁹⁸=6240±85 s⁻¹ mol⁻¹ kg, ΔH₂^‡ Au,CN=40.0±0.8 kJ mol⁻¹, ΔS₂^‡ Au,CN=−37.8±3 J mol⁻¹ K⁻¹ and ΔV₂^‡ Au,CN=+2±1 cm³ mol⁻¹. The rate constant observed varies about nine orders of magnitude depending on the pH and HCN does not act as a nucleophile. The observed rate constant of X⁻ exchange on [AuX₄]⁻ are two or three orders of magnitude faster than the Pt(II) analogue.     

Kinetics and mechanism of the reactions of ozone with superoxo, hydroperoxo, and hydrido complexes of rhodium(III)

Oxidation of the title complexes with ozone takes place by hydrogen atom, hydride, and electron transfer mechanisms. The reaction with (NH₃)₄(H₂O)RhH²⁺ is a two electron process, believed to involve hydride transfer with a rate constant k = (2.2 ± 0.2) × 10⁵ M⁻¹ s⁻¹ and an isotope effect k_H/k_D = 2. The oxidation of (NH₃)₄(H₂O)RhOOH²⁺ to (NH₃)₄(H₂O)RhOO²⁺ by an apparent hydrogen atom transfer is quantitative and fast, k = (6.9 ± 0.3) × 10³ M⁻¹ s⁻¹, and constitutes a useful route for the preparation of the superoxo complex. The latter is also oxidized by ozone, but more slowly, k = 480 ± 50 M⁻¹ s⁻¹.     

A novel methodology for generating 3D finite element models of the hip from 2D radiographs

Finite element (FE) modelling has been proposed as a tool for estimating fracture risk and patient-specific FE models are commonly based on computed tomography (CT). Here, we present a novel method to automatically create personalised 3D models from standard 2D hip radiographs. A set of geometrical parameters of the femur were determined from seven a–p hip radiographs and compared to the 3D femoral shape obtained from CT as training material; the error in reconstructing the 3D model from the 2D radiographs was assessed. Using the geometry parameters as the input, the 3D shape of another 21 femora was built and meshed, separating a cortical and trabecular compartment. The material properties were derived from the homogeneity index assessed by texture analysis of the radiographs, with focus on the principal tensile and compressive trabecular systems. The ability of these FE models to predict failure load as determined by experimental biomechanical testing was evaluated and compared to the predictive ability of DXA. The average reconstruction error of the 3D models was 1.77 mm (±1.17 mm), with the error being smallest in the femoral head and neck, and greatest in the trochanter. The correlation of the FE predicted failure load with the experimental failure load was r²=64% for the reconstruction FE model, which was significantly better (p<0.05) than that for DXA (r²=24%). This novel method for automatically constructing a patient-specific 3D finite element model from standard 2D radiographs shows encouraging results in estimating patient-specific failure loads.     

Molecular Organization of Cholesterol in Polyunsaturated Membranes: Microdomain Formation

The molecular organization of cholesterol in phospholipid bilayers composed of 1,2-diarachidonylphosphatidylcholine (20:4-20:4PC), 1-stearoyl-2-arachidonylphosphatidylcholine (18:0-20:4PC), and 20:4-20:4PC/18:0-20:4PC (1/1 mol) was investigated by solid-state ²H NMR and by low- and wide-angle x-ray diffraction (XRD). On the basis of distinct quadrupolar powder patterns arising from [3α-²H₁]cholesterol intercalated into the membrane and phase separated as solid, solubility χ_chol^NMR = 17 ± 2 mol% and tilt angle α₀ = 25 ± 1° in 20:4-20:4PC were determined. The corresponding values in 18:0-20:4PC were χ_chol^NMR ≥ 50 mol% and α₀ = 16 ± 1°. Cholesterol solubility determined by XRD was χ_chol^XRD = 15 ± 2 mol% and χ_chol^XRD = 49 ± 1 mol% for 20:4-20:4PC and 18:0-20:4PC, respectively. XRD experiments show that the solid sterol is monohydrate crystals presumably residing outside the bilayer. The ²H NMR spectrum for equimolar [3α-²H₁]cholesterol added to mixed 20:4-20:4PC/18:0-20:4PC (1/1 mol) membranes is consistent with segregation of cholesterol into 20:4-20:4PC and 18:0-20:4PC microdomains of <160 Å in size that preserve the molecular organization of sterol in the individual phospholipid constituents. Our results demonstrate unambiguously that cholesterol has low affinity to polyunsaturated fatty acids and support hypotheses of lateral phase separation of membrane constituents into sterol-poor/polyunsaturated fatty acid-rich and sterol-rich/saturated fatty acid-rich microdomains.     

The effects of tensile-compressive loading mode and microarchitecture on microdamage in human vertebral cancellous bone

The amount of microdamage in bone tissue impairs mechanical performance and may act as a stimulus for bone remodeling. Here we determine how loading mode (tension vs. compression) and microstructure (trabecular microarchitecture, local trabecular thickness, and presence of resorption cavities) influence the number and volume of microdamage sites generated in cancellous bone following a single overload. Twenty paired cylindrical specimens of human vertebral cancellous bone from 10 donors (47–78 years) were mechanically loaded to apparent yield in either compression or tension, and imaged in three dimensions for microarchitecture and microdamage (voxel size 0.7×0.7×5.0 μm³). We found that the overall proportion of damaged tissue was greater (p=0.01) for apparent tension loading (3.9±2.4%, mean±SD) than for apparent compression loading (1.9±1.3%). Individual microdamage sites generated in tension were larger in volume (p<0.001) but not more numerous (p=0.64) than sites in compression. For both loading modes, the proportion of damaged tissue varied more across donors than with bone volume fraction, traditional measures of microarchitecture (trabecular thickness, trabecular separation, etc.), apparent Young?s modulus, or strength. Microdamage tended to occur in regions of greater trabecular thickness but not near observable resorption cavities. Taken together, these findings indicate that, regardless of loading mode, accumulation of microdamage in cancellous bone after monotonic loading to yield is influenced by donor characteristics other than traditional measures of microarchitecture, suggesting a possible role for tissue material properties.     

Stoichiometry of electrocatalytic cycle of cytochrome P450 2B4

Stoichiometry of the electrocatalytical cycle of cytochrome P450 2B4 was studied in kinetic mode according to bielectrode scheme. Graphite screen-printed electrodes with immobilized cytochrome P450 2B4 were used as the operating electrode (at the potential E^0′ = −450 mV) and electrodes, modified with cytochrome c (E^0′ = −50 mV) or Prussian Blue (E^0′ = 0), as measuring electrodes (for H₂O₂) and Clark-type electrode (for O₂). Benzphetamine N-demethylation rate was 17 ± 3 nmol/nmol of enzyme/min, peroxide production was 4.8 ± 0.7 nmol/nmol of enzyme/min (substrate-free system), 3.3 ± 0.6 nmol/nmol of enzyme/min (0.5 mM benzphetamine), the oxygen consumption rate by Р450 2В4 was 19.4 ± 0.6 nmol/nmol of enzyme/min (in the presence of benzphetamine), 4.8 ± 0.4 nmol/nmol of enzyme/min (without substrate). Based on stoichiometry of P450 electrocatalysis adequacy of electrochemical reduction and P450-monooxygenase system was revealed.     

[H,N] NMR studies of the aquation of cis-diamine platinum(II) complexes

Two ¹⁵N-labelled cis-Pt(II) diamine complexes with dimethylamine (¹⁵N-dma) and isopropylamine (¹⁵N-ipa) ligands have been prepared and characterised. [¹H,¹⁵N] HSQC NMR spectroscopy is used to obtain the rate and equilibrium constants for the aquation of cis-[PtCl₂(¹⁵N-dma)₂] at 298 K in 0.1 M NaClO₄ and to determine the pK_a values of cis-[PtCl(H₂O)(¹⁵N-dma)₂]⁺ (6.37) and cis-[Pt(H₂O)₂(¹⁵N-dma)₂]²⁺ (pK_a1 = 5.17, pK_a2 = 6.47). The rate constants for the first and second aquation steps (k₁ = (2.12 ± 0.01) × 10⁻⁵ s⁻¹, k₂ = (8.7 ± 0.7) × 10⁻⁶ s⁻¹) and anation steps (k₋₁ = (6.7 ± 0.8) × 10⁻³ M⁻¹ s⁻¹, k₋₂ = 0.043 ± 0.004 M⁻¹ s⁻¹) are very similar to those reported for cisplatin under similar conditions, and a minor difference is that slow formation of the hydroxo-bridged dimer is observed. Aquation studies of cis-[PtCl₂(¹⁵N-ipa)₂] were precluded by the close proximity of the NH proton signal to the ¹H₂O resonance.     

Applied osmotic loading for promoting development of engineered cartilage

This study investigated the potential use of static osmotic loading as a cartilage tissue engineering strategy for growing clinically relevant grafts from either synovium-derived stem cells (SDSCs) or chondrocytes. Bovine SDSCs and chondrocytes were individually encapsulated in 2% w/v agarose and divided into chondrogenic media of osmolarities 300 (hypotonic), 330 (isotonic), and 400 (hypertonic, physiologic) mOsM for up to 7 weeks. The application of hypertonic media to constructs comprised of SDSCs or chondrocytes led to increased mechanical properties as compared to hypotonic (300 mOsM) or isotonic (330 mOsM) media (p<0.05). Constant exposure of SDSC-seeded constructs to 400 mOsM media from day 0 to day 49 yielded a Young's modulus of 513±89 kPa and GAG content of 7.39±0.52%ww on day 49, well within the range of values of native, immature bovine cartilage. Primary chondrocyte-seeded constructs achieved almost as high a Young's modulus, reaching 487±187 kPa and 6.77±0.54%ww (GAG) for the 400 mOsM condition (day 42). These findings suggest hypertonic loading as a straightforward strategy for 3D cultivation with significant benefits for cartilage tissue engineering strategies. In an effort to understand potential mechanisms responsible for the observed response, cell volume measurements in response to varying osmotic conditions were evaluated in relation to the Boyle–van't Hoff (BVH) law. Results confirmed that chondrocytes behave as perfect osmometers; however SDSCs deviated from the BVH relation.     

Influence of cell equivalent spherical diameter on the growth rate and cell density of marine phytoplankton

The maximal growth rates (μ_max) of 8 species of marine phytoplankton were studied in detail. A Logistic growth model was used to describe the growth process of phytoplankton and the averaged plotting correlation coefficient was 1.00 ± 0.01 (mean ± standard deviation). The size distribution of phytoplankton could be well represented by single or combined Gaussian distribution functions. The size distribution of phytoplankton was investigated by daily analysis, and the variation of the median equivalent spherical diameter (MESD) was recorded. The size of algal cells varied throughout the process of population growth, and the size distribution characteristic of the two species of pyrrophytes investigated also changed during the growth process. The relation between maximum growth rate and MESD could be expressed by the equation μ_max = a * MESD^b (where μ_max is the maximum specific growth rate, MESD is the median equivalent spherical diameter, and a and b are constants equal to 2.10 × 10⁵ and − 1.15, respectively), estimated by nonlinear regression analysis with the allometric function. The dependence of maximum cell density on algal MESD was also investigated and the relationship B_f = 1.56 × 10⁷ MESD^− 1.20 was obtained (where B_f is the maximum cell density).     

(E)-2-(2-(2-hydroxyphenyl)hydrazono)-1-phenylbutane-1,3-dione: Tautomery and coordination to copper(II)

(E)-2-(2-(2-hydroxyphenyl)hydrazono)-1-phenylbutane-1,3-dione (H₂L) was synthesized by azocoupling of diazonium salt of 2-hydroxyaniline with 1-phenylbutane-1,3-dione and characterized by IR, ¹H and ¹³C NMR spectroscopies and X-ray diffraction analysis. In solution, H₂L exists as a mixture of the enol-azo and hydrazone tautomeric forms and a decrease of temperature and of solvent polarity shifts the tautomeric balance to the hydrazone form. In the solid state, H₂L crystallizes from ethanol-water in the monohydrate hydrazone form, as shown by X-ray analysis. The dissociation constants of H₂L (pK₁ = 5.98 ± 0.04, pK₂ = 9.72 ± 0.03) and the stability constants of its copper(II) complex (log β₁ = 11.01 ± 0.07, log β₂ = 20.19 ± 0.08) were determined by the potentiometric method in aqueous-ethanol solution. The copper(II) complex [Cu₂(μ-L)₂]_n was isolated in the solid state and found by X-rays to be a coordination polymer of a binuclear core with a distorted square pyramidal metal coordination geometry.