Dissecting the 3-D structure of vimentin intermediate filaments by cryo-electron tomography

Vimentin polymerizes via complex lateral interactions of coiled-coil dimers into long, flexible filaments referred to as intermediate filaments (IFs). Intermediate in diameter between microtubules and microfilaments, IFs constitute the third cytoskeletal filament system of metazoan cells. Here we investigated the molecular basis of the 3-D architecture of vimentin IFs by cryo-electron microscopy (cryo-EM) as well as cryo-electron tomography (Cryo-ET) 3-D reconstruction. We demonstrate that vimentin filaments in cross-section exhibit predominantly a four-stranded protofibrilar organization with a right-handed supertwist with a helical pitch of about 96 nm. Compact filaments imaged by cryo-EM appear surprisingly straight and hence appear very stiff. In addition, IFs exhibited an increased flexibility at sites of partial unraveling. This is in strong contrast to chemically fixed, negatively stained preparations of vimentin filaments that generally exhibit smooth bending without untwisting. At some point along the filament unraveling may be triggered and propagates in a cooperative manner so that long stretches of filaments appear to have unraveled rapidly in a coordinated fashion.     

Molecular architecture of intermediate filaments

Together with microtubules and actin microfilaments, approximately 11 nm wide intermediate filaments (IFs) constitute the integrated, dynamic filament network present in the cytoplasm of metazoan cells. This network is critically involved in division, motility and other cellular processes. While the structures of microtubules and microfilaments are known in atomic detail, IF architecture is presently much less understood. The elementary 'building block' of IFs is a highly elongated, rod-like dimer based on an alpha-helical coiled-coil structure. Assembly of cytoplasmic IF proteins, such as vimentin, begins with a lateral association of dimers into tetramers and gradually into the so-called unit-length filaments (ULFs). Subsequently ULFs start to anneal longitudinally, ultimately yielding mature IFs after a compaction step. For nuclear lamins, however, assembly starts with a head-to-tail association of dimers. Recently, X-ray crystallographic data were obtained for several fragments of the vimentin dimer. Based on the dimer structure, molecular models of the tetramer and the entire filament are now a possibility.     

Exploring the mechanical properties of single vimentin intermediate filaments by atomic force microscopy

Intermediate filaments (IFs), together with actin filaments and microtubules, compose the cytoskeleton. Among other functions, IFs impart mechanical stability to cells when exposed to mechanical stress and act as a support when the other cytoskeletal filaments cannot keep the structural integrity of the cells. Here we present a study on the bending properties of single vimentin IFs in which we used an atomic force microscopy (AFM) tip to elastically deform single filaments hanging over a porous membrane. We obtained a value for the bending modulus of non-stabilized IFs between 300 MPa and 400 MPa. Our results together with previous ones suggest that IFs present axial sliding between their constitutive building blocks and therefore have a bending modulus that depends on the filament length. Measurements of glutaraldehyde-stabilized filaments were also performed to reduce the axial sliding between subunits and therefore provide a lower limit estimate of the Young's modulus of the filaments. The results show an increment of two to three times in the bending modulus for the stabilized IFs with respect to the non-stabilized ones, suggesting that the Young's modulus of vimentin IFs should be around 900 MPa or higher.     

Assessing the flexibility of intermediate filaments by atomic force microscopy

Eukaryotic cells contain three cytoskeletal filament systems that exhibit very distinct assembly properties, supramolecular architectures, dynamic behaviour and mechanical properties. Microtubules and microfilaments are relatively stiff polar structures whose assembly is modulated by the state of hydrolysis of the bound nucleotide. In contrast, intermediate filaments (IFs) are more flexible apolar structures assembled from a approximately 45 nm long coiled-coil dimer as the elementary building block. The differences in flexibility that exist among the three filament systems have been described qualitatively by comparing electron micrographs of negatively stained dehydrated filaments and by directly measuring the persistence length of F-actin filaments (approximately 3-10 microm) and microtubules (approximately 1-8 mm) by various physical methods. However, quantitative data on the persistence length of IFs are still missing. Toward this goal, we have carried out atomic force microscopy (AFM) in physiological buffer to characterise the morphology of individual vimentin IFs adsorbed to different solid supports. In addition, we compared these images with those obtained by transmission electron microscopy (TEM) of negatively stained dehydrated filaments. For each support, we could accurately measure the apparent persistence length of the filaments, yielding values ranging between 0.3 microm and 1 microm. Making simple assumptions concerning the adsorption mechanism, we could estimate the persistence length of an IF in a dilute solution to be approximately 1 microm, indicating that the lower measured values reflect constraints induced by the adsorption process of the filaments on the corresponding support. Based on our knowledge of the structural organisation and mechanical properties of IFs, we reason that the lower persistence length of IFs compared to that of F-actin filaments is caused by the presence of flexible linker regions within the coiled-coil dimer and by postulating the occurrence of axial slipping between dimers within IFs.     

The Supramolecular Organization of the C. elegans Nuclear Lamin Filament

Nuclear lamins are involved in most nuclear activities and are essential for retaining the mechano-elastic properties of the nucleus. They are nuclear intermediate filament (IF) proteins forming a distinct meshwork-like layer adhering to the inner nuclear membrane, called the nuclear lamina. Here, we present for the first time, the three-dimensional supramolecular organization of lamin 10 nm filaments and paracrystalline fibres. We show that Caenorhabditis elegans nuclear lamin forms 10 nm IF-like filaments, which are distinct from their cytoplasmic counterparts. The IF-like lamin filaments are composed of three and four tetrameric protofilaments, each of which contains two partially staggered anti-parallel head-to-tail polymers. The beaded appearance of the lamin filaments stems from paired globular tail domains, which are spaced regularly, alternating between 21 nm and 27 nm. A mutation in an evolutionarily conserved residue that causes Hutchison-Gilford progeria syndrome in humans alters the supramolecular structure of the lamin filaments. On the basis of our structural analysis, we propose an assembly pathway that yields the observed 10 nm IF-like lamin filaments and paracrystalline fibres. These results serve also as a platform for understanding the effect of laminopathic mutations on lamin supramolecular organization.     

Softness, strength and self-repair in intermediate filament networks

One cellular function of intermediate filaments is to provide cells with compliance to small deformations while strengthening them when large stresses are applied. How IFs accomplish this mechanical role is revealed by recent studies of the elastic properties of single IF protein polymers and by viscoelastic characterization of the networks they form. IFs are unique among cytoskeletal filaments in withstanding large deformations. Single filaments can stretch to more than 3 times their initial length before breaking, and gels of IF withstand strains greater than 100% without damage. Even after mechanical disruption of gels formed by crossbridged neurofilaments, the elastic modulus of these gels rapidly recovers under conditions where gels formed by actin filaments are irreversibly ruptured. The polyelectrolyte properties of IFs may enable crossbridging by multivalent counterions, but identifying the mechanisms by which IFs link into bundles and networks in vivo remains a challenge.     

Severe Myopathy Mutations Modify the Nanomechanics of Desmin Intermediate Filaments

Mutations in the intermediate filament (IF) protein desmin cause severe forms of myofibrillar myopathy characterized by partial aggregation of the extrasarcomeric desmin cytoskeleton and structural disorganization of myofibrils. In contrast to prior expectations, we showed that some of the known disease-causing mutations, such as DesA360P, DesQ389P and DesD399Y, are assembly-competent and do allow formation of bona fide IFs in vitro and in vivo. We also previously demonstrated that atomic force microscopy can be employed to measure the tensile properties of single desmin IFs. Using the same approach on filaments formed by the aforementioned mutant desmins, we now observed two different nanomechanical behaviors: DesA360P exhibited tensile properties similar to that of wild-type desmin IFs, whereas DesQ389P and DesD399Y exhibited local variations in their tensile properties along the filament length. Based on these findings, we hypothesize that DesQ389P and DesD399Y may cause muscle disease by altering the specific biophysical properties of the desmin filaments, thereby compromising both its mechanosensing and mechanotransduction ability.     

The assembly of keratins from higher plant cells

Summary In vitro assembly and morphological characteristics of purified 58 kDa, 52 kDa, 50 kDa, and 45 kDa polypeptides in the leaves and the cotyledons of the cabbage (Brassica pekinensis Rupt.) were investigated by electron microscopy and scanning tunneling microscopy. The three or four purified intermediate filament (IF) polypeptides can spontaneously assemble into intermediate filaments in vitro with a 23–24 nm axial repeat, which indicates that keratin IFs in higher plant cells have the same molecular arrangement as in animal cells. STM images suggest that the plant keratin filaments display a pronounced structural polymorphism, which can be composed of 3 nm, 4.5 nm, or 6 nm wide keratin protofilaments.Abbreviation IF intermediate filament - STM scanning tunneling microscopy - SDS sodium dodecyl sulfate - BCIP 5-bromo-4-chloro-3-indolyl phosphate-toluidine - NBC p-nitroblue tetrazolium chloride - PMSF phenylmethyl sulfonylfluoride - HOPG high oriented pyrolytic graphite     

Direct Observation of Subunit Exchange along Mature Vimentin Intermediate Filaments

Actin filaments, microtubules, and intermediate filaments (IFs) are central elements of the metazoan cytoskeleton. At the molecular level, the assembly mechanism for actin filaments and microtubules is fundamentally different from that of IFs. The former two types of filaments assemble from globular proteins. By contrast, IFs assemble from tetrameric complexes of extended, half-staggered, and antiparallel oriented coiled-coils. These tetramers laterally associate into unit-length filaments; subsequent longitudinal annealing of unit-length filaments yields mature IFs. In vitro, IFs form open structures without a fixed number of tetramers per cross-section along the filament. Therefore, a central question for the structural biology of IFs is whether individual subunits can dissociate from assembled filaments and rebind at other sites. Using the fluorescently labeled IF-protein vimentin for assembly, we directly observe and quantitatively determine subunit exchange events between filaments as well as with soluble vimentin pools. Thereby we demonstrate that the cross-sectional polymorphism of donor and acceptor filaments plays an important role. We propose that in segments of donor filaments with more than the standard 32 molecules per cross-section, subunits are not as tightly bound and are predisposed to be released from the filament.     

Deletion mutagenesis of the amino-terminal head domain of vimentin reveals dispensability of large internal regions for intermediate filament assembly and stability

Previous studies have shown that the non-alpha-helical head domain of vimentin is required for polymerization of intermediate filaments (IFs) and, furthermore, a nonapeptide highly conserved among type III IF subunit proteins at their extreme amino-terminus is essential for this process. Recombinant DNA technology was employed to produce specific vimentin deletion mutant proteins (for in vitro studies) or vimentin protein expression plasmids (for in vivo studies), which were used to identify other regions of the vimentin head domain important for polymerization. Various vimentin proteins lacking either residues 25-38, 44-95, or 40-95 polymerized into wild-type or largely normal IFs, both in vitro and in vivo. Vimentin proteins lacking residues 44-69 or 25-63 failed to form IFs in vitro, but assembled into IFs in vivo. Vimentin proteins lacking residues 25-68, 44-103, or 88-103 failed to form IFs in vitro or in vivo. Taken together with previous results, these data demonstrate that the middle of the vimentin non-alpha-helical head domain, which is known to be the site of nucleic acid binding, is completely dispensable for IF formation, whereas both ends of the vimentin non-alpha-helical head domain are required for IF formation. The simplest explanation for these results is that the middle of the vimentin non-alpha-helical head domain loops out, thereby permitting the juxtaposition of the ends of the head domain and their productive interaction with other protein domains (probably the C-terminus of the rod domain) during IF polymerization. The ability of some of the mutant proteins to form IFs in vivo, but not in vitro, suggests that as-yet-unknown cellular proteins may interact with and, in some cases, enable polymerization of IFs, even though they are not absolutely required for IF formation by wild-type vimentin.     

Dissection of keratin dynamics: different contributions of the actin and microtubule systems

It has only recently been recognized that intermediate filaments (IFs) and their assembly intermediates are highly motile cytoskeletal components with cell-type- and isotype-specific characteristics. To elucidate the cell-type-independent contribution of actin filaments and microtubules to these motile properties, fluorescent epithelial IF keratin polypeptides were introduced into non-epithelial, adrenal cortex-derived SW13 cells. Time-lapse fluorescence microscopy of stably transfected SW13 cell lines synthesizing fluorescent human keratin 8 and 18 chimeras HK8-CFP and HK18-YFP revealed extended filament networks that are entirely composed of transgene products and exhibit the same dynamic features as keratin systems in epithelial cells. Detailed analyses identified two distinct types of keratin motility: (I) Slow (approximately 0.23 microm/min), inward-directed, continuous transport of keratin filament precursor particles from the plasma membrane towards the cell interior, which is most pronounced in lamellipodia. (II) Fast (approximately 17 microm/min), bidirectional and intermittent transport of keratin particles in axonal-type cell processes. Disruption of actin filaments inhibited type I motility while type II motility remained. Conversely, microtubule disruption inhibited transport mode II while mode I continued. Combining the two treatments resulted in a complete block of keratin motility. We therefore conclude that keratin motility relies both on intact actin filaments and microtubules and is not dependent on epithelium-specific cellular factors.     

Towards a molecular description of intermediate filament structure and assembly

Intermediate filaments (IFs) represent one of the prominent cytoskeletal elements of metazoan cells. Their constituent proteins are coded by a multigene family, whose members are expressed in complex patterns that are controlled by developmental programs of differentiation. Hence, IF proteins found in epidermis differ significantly from those in muscle or neuronal tissues. Due to their fibrous nature, which stems from a fairly conserved central alpha-helical coiled-coil rod domain, IF proteins have long resisted crystallization and thus determination of their atomic structure. Since they represent the primary structural elements that determine the shape of the nucleus and the cell more generally, a major challenge is to arrive at a more rational understanding of how their nanomechanical properties effect the stability and plasticity of cells and tissues. Here, we review recent structural results of the coiled-coil dimer, assembly intermediates and growing filaments that have been obtained by a hybrid methods approach involving a rigorous combination of X-ray crystallography, small angle X-ray scattering, cryo-electron tomography, computational analysis and molecular modeling.     

Biomechanical properties of intermediate filaments: from tissues to single filaments and back

The animal cell cytoskeleton consists of three interconnected filament systems: actin-containing microfilaments (MFs), microtubules (MTs), and the lesser known intermediate filaments (IFs). All IF proteins share a common tripartite domain structure and the ability to assemble into 8-12 nm wide filaments. Electron microscopy data suggest that IFs are built according to a completely different plan from that of MFs and MTs. IFs are known to impart mechanical stability to cells and tissues but, until recently, the biomechanical properties of single IFs were unknown. However, with the discovery of naturally occurring micrometer-wide IF bundles and the development of new methodologies to mechanically probe single filaments, it is now possible to propose a more unified view of IF biomechanics. Unlike MFs and MTs, single IFs can now be described as flexible, extensible and tough, which has important implications for our understanding of cell and tissue mechanics. Furthermore, the molecular mechanisms at play when IFs are deformed point toward a pivotal role for them in mechanotransduction.     

The nanomechanical properties of rat fibroblasts are modulated by interfering with the vimentin intermediate filament system

The contribution of the intermediate filament (IF) network to the mechanical response of cells has so far received little attention, possibly because the assembly and regulation of IFs are not as well understood as that of the actin cytoskeleton or of microtubules. The mechanical role of IFs has been mostly inferred from measurements performed on individual filaments or gels in vitro. In this study we employ atomic force microscopy (AFM) to examine the contribution of vimentin IFs to the nanomechanical properties of living cells under native conditions. To specifically target and modulate the vimentin network, Rat-2 fibroblasts were transfected with GFP-desmin variants. Cells expressing desmin variants were identified by the fluorescence microscopy extension of the AFM instrument. This allowed us to directly compare the nanomechanical response of transfected and untransfected cells at high spatial resolution by means of AFM. Depending on the variant desmin, transfectants were either softer or stiffer than untransfected fibroblasts. Expression of the non-filament forming GFP-DesL345P mutant led to a collapse of the endogenous vimentin network in the perinuclear region that was accompanied by localized stiffening. Correlative confocal microscopy indicates that the expression of desmin variants specifically targets the endogenous vimentin IF network without major rearrangements of other cytoskeletal components. By measuring functional changes caused by IF rearrangements in intact cells, we show that IFs play a crucial role in mechanical behavior not only at large deformations but also in the nanomechanical response of individual cells.     

The interaction of capping protein with the barbed end of the actin filament

The interaction of capping protein (CP) with actin filaments is an essential element of actin assembly and actin-based motility in nearly all eukaryotes. The dendritic nucleation model for Arp2/3-based lamellipodial assembly features capping of barbed ends by CP, and the formation of filopodia is proposed to involve inhibition of capping by formins and other proteins. To understand the molecular basis for how CP binds the barbed end of the actin filament, we have used a combination of computational and experimental approaches, primarily involving molecular docking and site-directed mutagenesis. We arrive at a model that supports all of our biochemical data and agrees very well with a cryo-electron microscopy structure of the capped filament. CP interacts with both actin protomers at the barbed end of the filament, and the amphipathic helix at the C-terminus of the β-subunit binds to the hydrophobic cleft on actin, in a manner similar to that of WH2 domains. These studies provide us with new molecular insight into how CP binds to the actin filament.     

Apparent stiffness of vimentin intermediate filaments in living cells and its relation with other cytoskeletal polymers

The cytoskeleton is a complex network of interconnected biopolymers intimately involved in the generation and transmission of forces. Several mechanical properties of microtubules and actin filaments have been extensively explored in cells. In contrast, intermediate filaments (IFs) received comparatively less attention despite their central role in defining cell shape, motility and adhesion during physiological processes as well as in tumor progression. Here, we explored relevant biophysical properties of vimentin IFs in living cells combining confocal microscopy and a filament tracking routine that allows localizing filaments with ~20 nm precision. A Fourier-based analysis showed that IFs curvatures followed a thermal-like behavior characterized by an apparent persistence length (lp*) similar to that measured in aqueous solution. Additionally, we determined that certain perturbations of the cytoskeleton affect lp* and the lateral mobility of IFs as assessed in cells in which either the microtubule dynamic instability was reduced or actin filaments were partially depolymerized. Our results provide relevant clues on how vimentin IFs mechanically couple with microtubules and actin filaments in cells and support a role of this network in the response to mechanical stress.     

A multi-scale approach to understand the mechanobiology of intermediate filaments

The animal cell cytoskeleton consists of three interconnected filament systems: actin microfilaments, microtubules and the lesser known intermediate filaments (IFs). All mature IF proteins share a common tripartite domain structure and the ability to assemble into 8–12 nm wide filaments. At the time of their discovery in the 1980s, IFs were only considered as passive elements of the cytoskeleton mainly involved in maintaining the mechanical integrity of tissues. Since then, our knowledge of IFs structure, assembly plan and functions has improved dramatically. Especially, single IFs show a unique combination of extensibility, flexibility and toughness that is a direct consequence of their unique assembly plan. In this review we will first discuss the mechanical design of IFs by combining the experimental data with recent multi-scale modeling results. Then we will discuss how mechanical forces may interact with IFs in vivo both directly and through the activation of other proteins such as kinases.     

Unusual ultrastructures of the Branchiostoma IF protein C2 containing heptads in the tail

Branchiostoma intermediate filament (IF) protein C2 contains a long tail domain consisting of several degenerate repeats which display a heptad repeat pattern. This unique tail sequence is predicted to constitute a long coiled coil domain in C2, which is separated from the rod by a glycine-rich linker L3. The recombinant IF protein C2 shows, in electron microscopy (EM), parallel rodlike dimers of 66.7 nm decorated by a larger globule on one side and a smaller globule on the other side. In contrast, the length of the tailless C2 dimers, decorated by only one small globule, is about 26 nm shorter. These results indicate that both the rod domain and the newly predicted coiled coil segment 3 participate in the formation of a double-stranded coiled coil dimer. Moreover, the two to four C2 dimers are able to associate via their globular tail domain into multiarm oligomers, an ability not seen by the tailless C2 mutant or the other currently known protostomic and vertebrate IFs.     

Expression of plectin mutant cDNA in cultured cells indicates a role of COOH-terminal domain in intermediate filament association

Plectin is an intermediate filament (IF) binding protein of exceptionally large size. Its molecular structure, revealed by EM and predicted by its sequence, indicates an NH2-terminal globular domain, a long rodlike central domain, and a globular COOH-terminal domain containing six highly homologous repeat regions. To examine the role of the various domains in mediating plectin's interaction with IFs, we have constructed rat cDNAs encoding truncated plectin mutants under the control of the SV-40 promoter. Mutant proteins expressed in mammalian COS and PtK2 cells could be distinguished from endogenous wild type plectin by virtue of a short carboxy-terminal antigenic peptide (P tag). As shown by conventional and confocal immunofluorescence microscopy, the transient expression of plectin mutants containing all six or the last four of the repeat regions of the COOH-terminus, or the COOH-terminus and the rod, associated with IF networks of both the vimentin and the cytokeratin type and eventually caused their collapse into perinuclear aggregates. Similar effects were observed upon expression of a protein encoded by a full length cDNA construct. Microtubules and microfilaments were unaffected. Unexpectedly, mutants containing the rod without any of the COOH-terminal repeats, accumulated almost exclusively within the nuclei of cells. When the rod was extended by the first one and a half of the COOH-terminal repeats, mutant proteins showed a partial cytoplasmic distribution, although association with intermediate filaments was not observed. Nuclear and diffuse cytoplasmic distribution was also observed upon expression of the NH2-terminal domain without rod. These results indicate that sequences located roughly within the last two thirds of the globular COOH-terminus are indispensable for association of plectin with intermediate filaments in living cells.