白色念珠菌生物被膜研究进展

难治性真菌感染的临床分析发现,病灶感染病原常以生物被膜的形态存在。生物被膜的形成可帮助真菌躲避宿主细胞免疫系统清除和药物的攻击,所造成的持续性感染严重威胁人类健康,因此,认识研究真菌生物被膜及其耐药机理对于防治临床真菌感染有着重大意义。白色念珠菌是一种临床感染常见的条件性致病菌,也是目前真菌生物被膜研究的主要研究模型。白色念珠菌生物被膜主要由多糖、蛋白质和DNA构成,其形成由微生物间的群体感应调控,并受到环境中营养成分及其附着物表面性质影响。研究发现,胞外基质的屏障作用、耐药基因的表达等机制与生物被膜耐药性的产生密切相关。本文就白色念珠菌生物被膜的形成过程、结构组成、形成的影响因素、现有研究模型、耐药机制和治疗策略等几个方面介绍近年来的研究进展。     

A Candida albicans early stage biofilm detachment event in rich medium

Background  

Dispersal from Candida albicans biofilms that colonize catheters is implicated as a primary factor in the link between contaminated catheters and life threatening blood stream infections (BSI). Appropriate in vitro C. albicans biofilm models are needed to probe factors that induce detachment events.     

Efficacy of surface-generated nitric oxide against Candida albicans adhesion and biofilm formation

This report details the efficacy of nitric oxide (NO)-releasing xerogel surfaces composed of N-(6-aminohexyl)aminopropyl trimethoxysilane (AHAP3) and isobutyltrimethoxysilane (BTMOS) against Candida albicans adhesion, viability, and biofilm formation. A parallel plate flow cell assay was used to examine the effect of NO on planktonic fungal cells. Nitric oxide fluxes as low as 14 pmol cm^?2 s^?1 were sufficient to reduce fungal adhesion by ～49% over the controls after 90 min. By utilizing a fluorescence live/dead assay and replicate plating, NO flux was determined to reduce fungal viability in a dose-dependent manner. The formation of C. albicans biofilms on NO-releasing xerogel-coated silicon rubber (SiR) coupons was impeded when compared to control (non-NO-releasing) and bare SiR surfaces. The synergistic efficacy of NO and silver sulfadiazine against adhered fungal cells and biofilms is reported with increased killing and biofilm inhibition over NO alone.     

Candida albicans and Non-C. albicans Candida Species: Comparison of Biofilm Production and Metabolic Activity in Biofilms, and Putative Virulence Properties of Isolates from Hospital Environments and Infections

Candida albicans and, more recently, non-C. albicans Candida spp. are considered the most frequent fungi in hospitals. This study analyzed Candida spp. isolates and compared the frequency of different species, that is, C. albicans and non-C. albicans Candida spp., and the origins of isolates, that is, from hospital environments or infections. Yeast virulence factors were evaluated based on biofilm production and metabolic activity. Hemolysin production and the antifungal susceptibility profiles of isolates were also evaluated. Candida spp. were highly prevalent in samples collected from hospital environments, which may provide a reservoir for continuous infections with these yeasts. There were no differences in the biofilm productivity levels and metabolic activities of the environmental and clinical isolates, although the metabolic activities of non-C. albicans Candida spp. biofilms were greater than those of the C. albicans biofilms (p < 0.05). Clinical samples had higher hemolysin production (p < 0.05) and lower susceptibility to fluconazole (p < 0.05). Non-C. albicans Candida spp. predominated in samples collected from hospital environments and infections (p < 0.05). These species had a lower susceptibility to fluconazole and amphotericin B, and their biofilms had higher metabolic activities than those produced by C. albicans, which may explain the increased incidence of fungal infections with these yeasts during recent years.     

In vitro and ex vivo biofilms of dermatophytes: a new panorama for the study of antifungal drugs

Abstract

This study describes an ex vivo model that creates an environment for dermatophyte biofilm growth, with features that resemble those of in vivo conditions, designing a new panorama for the study of antifungal susceptibility. Regarding planktonic susceptibility, MIC ranges were 0.125-1?µg ml^?1 for griseofulvin and 0.000097-0.25?µg ml^?1 for itraconazole and terbinafine. sMIC50 ranges were 2->512?µg ml^?1 for griseofulvin and 0.25->64?µg ml^?1 for itraconazole and terbinafine. CLSM images demonstrated a reduction in the amount of cells within the biofilm, but hyphae and conidia were still observed and biofilm biomass was maintained. SEM analysis demonstrated a retraction in the biofilm matrix, but fungal structures and water channels were preserved. These results show that ex vivo biofilms are more tolerant to antifungal drugs than in vitro biofilms, suggesting that environmental and nutritional conditions created by this ex vivo model favor biofilm growth and robustness, and hence drug tolerance.     

Presence of Extracellular DNA in the <Emphasis Type="Italic">Candida albicans</Emphasis> Biofilm Matrix and its Contribution to Biofilms

DNA has been described as a structural component of the extracellular matrix (ECM) in bacterial biofilms. In Candida albicans, there is a scarce knowledge concerning the contribution of extracellular DNA (eDNA) to biofilm matrix and overall structure. This work examined the presence and quantified the amount of eDNA in C. albicans biofilm ECM and the effect of DNase treatment and the addition of exogenous DNA on C. albicans biofilm development as indicators of a role for eDNA in biofilm development. We were able to detect the accumulation of eDNA in biofilm ECM extracted from C. albicans biofilms formed under conditions of flow, although the quantity of eDNA detected differed according to growth conditions, in particular with regards to the medium used to grow the biofilms. Experiments with C. albicans biofilms formed statically using a microtiter plate model indicated that the addition of exogenous DNA (>160 ng/ml) increases biofilm biomass and, conversely, DNase treatment (>0.03 mg/ml) decreases biofilm biomass at later time points of biofilm development. We present evidence for the role of eDNA in C. albicans biofilm structure and formation, consistent with eDNA being a key element of the ECM in mature C. albicans biofilms and playing a predominant role in biofilm structural integrity and maintenance.     

Review of techniques for diagnosis of catheter-related Candida biofilm infections

Recent evidence shows that many hospital-acquired infections, including most device-associated infections, involve the persistence of sessile organisms in the form of biofilms that are attached to a device surface and encased in an extracellular matrix. The cells in this environment exhibit an altered phenotype with respect to antimicrobial resistance and thus are extraordinarily difficult to eradicate without device removal. Although a number of implantable and topical devices are at risk for Candida biofilm formation, this review focuses on the diagnosis of the most common of these infections, biofilm growth on the surface of central venous catheters and urinary catheters.     

Design of a Simple Model of <Emphasis Type="Italic">Candida albicans</Emphasis> Biofilms Formed under Conditions of Flow: Development,Architecture, and Drug Resistance

Candida albicans biofilms on most medical devices are exposed to a flow of body fluids that provide water and nutrients to the fungal cells. While C. albicans biofilms grown in vitro under static conditions have been exhaustively studied, the same is not true for biofilms developed under continuous flow of replenishing nutrients. Here, we describe a simple flow biofilm (FB) model that can be built easily with materials commonly available in most microbiological laboratories. We demonstrate that C. albicans biofilms formed using this flow system show increased architectural complexity compared to biofilms grown under static conditions. C. albicans biofilms under continuous medium flow grow rapidly, and by 8 h show characteristics similar to 24 h statically grown biofilms. Biomass measurements and microscopic observations further revealed that after 24 h of incubation, FB was more than twofold thicker than biofilms grown under static conditions. Microscopic analyses revealed that the surface of these biofilms was extremely compact and wrinkled, unlike the open hyphal layer typically seen in 24 h static biofilms. Results of antifungal drug susceptibility tests showed that C. albicans cells in FB exhibited increased resistance to most clinically used antifungal agents.     

Biofilm of Candida albicans: formation,regulation and resistance

Candida albicans is the most common human fungal pathogen, causing infections that range from mucous membranes to systemic infections. The present article provides an overview of C. albicans, with the production of biofilms produced by this fungus, as well as reporting the classes of antifungals used to fight such infections, together with the resistance mechanisms to these drugs. Candida albicans is highly adaptable, enabling the transition from commensal to pathogen due to a repertoire of virulence factors. Specifically, the ability to change morphology and form biofilms is central to the pathogenesis of C. albicans. Indeed, most infections by this pathogen are associated with the formation of biofilms on surfaces of hosts or medical devices, causing high morbidity and mortality. Significantly, biofilms formed by C. albicans are inherently tolerant to antimicrobial therapy, so the susceptibility of C. albicans biofilms to current therapeutic agents remains low. Therefore, it is difficult to predict which molecules will emerge as new clinical antifungals. The biofilm formation of C. albicans has been causing impacts on susceptibility to antifungals, leading to resistance, which demonstrates the importance of research aimed at the prevention and control of these clinical microbial communities.     

Silver colloidal nanoparticles: antifungal effect against adhered cells and biofilms of Candida albicans and Candida glabrata

The aim of this study was to evaluate the effect of silver nanoparticles (SN) against Candida albicans and Candida glabrata adhered cells and biofilms. SN (average diameter 5 nm) were synthesized by silver nitrate reduction with sodium citrate and stabilized with ammonia. Minimal inhibitory concentration (MIC) tests were performed for C. albicans (n = 2) and C. glabrata (n = 2) grown in suspension following the Clinical Laboratory Standards Institute microbroth dilution method. SN were applied to adhered cells (2 h) or biofilms (48 h) and after 24 h of contact their effect was assessed by enumeration of colony forming units (CFUs) and quantification of total biomass (by crystal violet staining). The MIC results showed that SN were fungicidal against all strains tested at very low concentrations (0.4–3.3 μg ml^?1). Furthermore, SN were more effective in reducing biofilm biomass when applied to adhered cells (2 h) than to pre-formed biofilms (48 h), with the exception of C. glabrata ATCC, which in both cases showed a reduction ～90%. Regarding cell viability, SN were highly effective on adhered C. glabrata and respective biofilms. On C. albicans the effect was not so evident but there was also a reduction in the number of viable biofilm cells. In summary, SN may have the potential to be an effective alternative to conventional antifungal agents for future therapies in Candida-associated denture stomatitis.     

In vitro efficacy of the lipopeptide biosurfactant surfactin-C15 and its complexes with divalent counterions to inhibit Candida albicans biofilm and hyphal formation

Abstract

Surfactin is a type of cyclic lipopeptide biosurfactant implicated in a wide range of applications. Although its antimicrobial activity has been characterized, its effect on Candida albicans physiology remains to be elucidated. The present study evaluated the influence of surfactin-C₁₅ (SF) and its complexes with divalent counterions on C. albicans biofilm formation and preformed biofilms. The SF and metal(II)-SF complexes inhibited biofilm formation and reduced the metabolic activity of mature biofilms in a concentration-dependent manner. The same concentrations of the compounds studied dislodged preexisting biofilms grown on polystyrene plates. Moreover, SF and its metal(II) complexes reduced the mRNA expression of hypha-specific genes HWP1, ALS1, ALS3, ECE1 and SAP4 without exhibiting significant growth inhibition. Further research showed that the compounds tested reduced cellular surface hydrophobicity (CSH). These results suggest that SF and metal(II)-SF complexes could be used as anti-biofilm agents against C. albicans hypha-related infections in clinical practice.     

Distribution Coefficients of Dietary Sugars in Artificial Candida Biofilms

Candida species are the most important fungal pathogens in humans and cause a variety of superficial and systemic diseases. Biofilm formation is a major virulence attribute contributing to Candida pathogenicity. Although the concentration and distribution of nutrients as well as antifungals across the biofilm thickness play a pivotal role in the development and persistence of Candida biofilms, only limited information is available on the latter aspects of Candida biofilms. Therefore, we attempted to characterize the diffusion coefficient (De) of common dietary sugars such as glucose, galactose, and sucrose in Candida albicans biofilms using horizontal attenuated total reflection-Fourier transform infrared spectroscopy (HATR-FTIR). Artificial Candida biofilms were formed using agarose polymers. De of three sugars tested, glucose, galactose, and sucrose in this artificial Candida biofilm model was found to be 4.08E-06 ± 3.63E-08, 4.08E-06 ± 3.70E-08, and 5.38E-06 ± 4.52E-08 cm² s⁻¹, respectively. We demonstrate here the utility of HATR-FTIR for the determination of diffusion of solutes such as dietary sugars across Candida biofilms.     

Towards non‐invasive monitoring of pathogen–host interactions during Candida albicans biofilm formation using in vivo bioluminescence

Candida albicans is a major human fungal pathogen causing mucosal and deep tissue infections of which the majority is associated with biofilm formation on medical implants. Biofilms have a huge impact on public health, as fungal biofilms are highly resistant against most antimycotics. Animal models of biofilm formation are indispensable for improving our understanding of biofilm development inside the host, their antifungal resistance and their interaction with the host immune defence system. In currently used models, evaluation of biofilm development or the efficacy of antifungal treatment is limited to ex vivo analyses, requiring host sacrifice, which excludes longitudinal monitoring of dynamic processes during biofilm formation in the live host. In this study, we have demonstrated for the first time that non‐invasive, dynamic imaging and quantification of in vitro and in vivo C. albicans biofilm formation including morphogenesis from the yeast to hyphae state is feasible by using growth‐phase dependent bioluminescent C. albicans strains in a subcutaneous catheter model in rodents. We have shown the defect in biofilm formation of a bioluminescent bcr1 mutant strain. This approach has immediate applications for the screening and validation ofantimycotics under in vivo conditions, for studying host–biofilm interactions in different transgenic mouse models and for testing the virulence of luminescent C. albicans mutants, hereby contributing to a better understanding of the pathogenesis of biofilm‐associated yeast infections.     

An in vitro dynamic microcosm biofilm model for caries lesion development and antimicrobial dose-response studies

Some dynamic biofilm models for dental caries development are limited as they require multiple experiments and do not allow independent biofilm growth units, making them expensive and time-consuming. This study aimed to develop and test an in vitro dynamic microcosm biofilm model for caries lesion development and for dose-response to chlorhexidine. Microcosm biofilms were grown under two different protocols from saliva on bovine enamel discs for up to 21 days. The study outcomes were as follows: the percentage of enamel surface hardness change, integrated hardness loss, and the CFU counts from the biofilms formed. The measured outcomes, mineral loss and CFU counts showed dose-response effects as a result of the treatment with chlorhexidine. Overall, the findings suggest that biofilm growth for seven days with 0.06 ml min^?1 salivary flow under exposure to 5% sucrose (3 × daily, 0.25 ml min^?1, 6 min) was suitable as a pre-clinical model for enamel demineralization and antimicrobial studies.     

Biofilm formation by the yeast Rhodotorula mucilaginosa: process,repeatability and cell attachment in a continuous biofilm reactor

Yeast biofilms contribute to quality impairment of industrial processes and also play an important role in clinical infections. Little is known about biofilm formation and their treatment. The aim of this study was to establish a multi-layer yeast biofilm model using a modified 3.7 l bench-top bioreactor operated in continuous mode (D = 0.12 h^?1). The repeatability of biofilm formation was tested by comparing five bioprocesses with Rhodotorula mucilaginosa, a strain isolated from washing machines. The amount of biofilm formed after 6 days post inoculation was 83 μg cm^?2 protein, 197 μg cm^?2 polysaccharide and 6.9 × 10⁶ CFU cm^?2 on smooth polypropylene surfaces. Roughening the surface doubled the amount of biofilm but also increased its spatial variability. Plasma modification of polypropylene significantly reduced the hydrophobicity but did not enhance cell attachment. The biofilm formed on polypropylene coupons could be used for sanitation studies.     

Characterization of Candida albicans and Staphylococcus aureus polymicrobial biofilm on different surfaces

BackgroundStaphylococcus aureus and Candida albicans have been co-isolated from biofilm-associated diseases such as denture stomatitis, periodontitis, and burn wound infections, as well as from medical devices. However, the polymicrobial biofilm of both microorganisms has not been fully characterized.AimsTo characterize the polymicrobial biofilm of C. albicans and S. aureus in terms of microbial density, synergy, composition, structure, and stability against antimicrobials and chemical agents.MethodsCrystal violet assay was used to measure the biofilm formation. Scanning electron microscopy and confocal microscopy were used to analyze the structure and chemical composition of the biofilms, respectively.ResultsSupplemented media with fetal bovine serum (FBS) decreased the biofilm formation of S. aureus and the polymicrobial biofilm. For C. albicans, depending on the culture media, the addition of glucose or FBS had a positive effect in biofilm formation. FBS decreased the adhesion to polystyrene wells for both microorganisms. Supplementing the media with glucose and FBS enhanced the growth of C. albicans and S. aureus, respectively. It seems that C. albicans contributes the most to the adhesion process and to the general structure of the biofilms on all the surfaces tested, including a catheter model. Interestingly, S. aureus showed a great adhesion capacity to the surface of C. albicans in the biofilms. Proteins and β-1,6-linked polysaccharides seem to be the most important molecules in the polymicrobial biofilm.ConclusionsThe polymicrobial biofilm had a complex structure, with C. albicans serving as a scaffold where S. aureus adheres, preferentially to the hyphal form of the fungus. Detection of polymicrobial infections and characterization of biofilms will be necessary in the future to provide a better treatment.     

In vitro and in vivo evaluation of the antifungal activity of fluoxetine combined with antifungals against Candida albicans biofilms and oral candidiasis

Abstract

Candida albicans biofilms are responsible for oral candidiasis. Fluoxetine is a widely used antidepressant, with certain anti-Candida activities. The antifungal activity of fluoxetine combined with various antifungals against C. albicans biofilms and oral candidiasis was evaluated in this study. The morphological change in the inhibition of fluoxetine on C. albicans biofilms was observed using SEM. The interactions between fluoxetine and antifungals against C. albicans biofilms were evaluated using microdilution checkerboard methods, FICI and the ΔE model. The synergistic combination was tested in vivo on the mice model of oral candidiasis. SEM imaging showed fluoxetine inhibited hyphal growth and biofilm formation. Fluoxetine combined with caspofungin exhibited synergistic effects against C. albicans biofilms. Antagonistic effects occurred when fluoxetine was combined with amphotericin B or terbinafine. Further, the fluoxetine combined with caspofungin significantly reduced the lesion score and CFU of C. albicans on the murine tongue (p?<?0.05), and relieved oral candidiasis of the infected mice.     

Lipopeptides from Bacillus strain AR2 inhibits biofilm formation by Candida albicans

The ability of the human fungal pathogen Candida albicans to reversibly switch between different morphological forms and establish biofilms is crucial for establishing infection. Targeting phenotypic plasticity and biofilm formation in C. albicans represents a new concept for antifungal drug discovery. The present study evaluated the influence of cyclic lipopeptide biosurfactant produced by Bacillus amyloliquefaciens strain AR2 on C. albicans biofilms. The biosurfactant was characterized as a mixture of iturin and fengycin by MALDI-TOF and amino acid analysis. The biosurfactant exhibited concentration dependent growth inhibition and fungicidal activity. The biosurfactant at sub-minimum growth inhibition concentration decreased cell surface hydrophobicity, hindered germ tube formation and reduced the mRNA expression of hyphae-specific gene HWP1 and ALS3 without exhibiting significant growth inhibition. The biosurfactants inhibited biofilm formation in the range of 46–100 % depending upon the concentration and Candida strains. The biosurfactant treatment dislodged 25–100 % of preformed biofilm from polystyrene plates. The biosurfactant retained its antifungal and antibiofilm activity even after exposure to extreme temperature. By virtue of the ability to inhibit germ tube and biofilm formation, two important traits of C. albicans involved in establishing infection, lipopeptides from strain AR2 may represent a potential candidate for developing heat stable anti-Candida drugs.     

Candida albicans biofilm formation on soft denture liners and efficacy of cleaning protocols

doi: 10.1111/j.1741‐2358.2011.00485.x
Candida albicans biofilm formation on soft denture liners and efficacy of cleaning protocols Objective: The aim of this study was to investigate Candida albicans biofilm formation on denture liners and to analyse the efficacy of cleaning protocols. Material and methods: Specimens were prepared from four silicone‐based soft denture liners. After artificial ageing and surface free energy determination, specimens were incubated with saliva (2 h) and Candida albicans ATCC 10231 for either short‐ (2.5 h) or long‐term (24 h) biofilm formation. Adherent cells were determined either after incubation of specimens with Candida albicans or after treatment with different denture cleaning protocols. Statistical analysis was performed using one‐way anova and the Games–Howell test (α = 0.05). Results: For both short‐ and long‐term biofilm formation, similar amounts of Candida albicans cells were found on the surface of the different liners (p = 0.295 and 0.178, respectively). For both short‐ and long‐term biofilm formation, the highest cleaning efficacy was observed for sodium hypochlorite (NaOCl; p < 0.01). The efficacy of the chemical denture cleaner in removing long‐term Candida albicans biofilms was significantly lower than the efficacy of removal by brushing (p < 0.001). Conclusion: Different silicone‐based soft denture liners yield similar Candida albicans biofilm formation on their surface. The highest efficacy for the removal of Candida albicans biofilms was identified for NaOCl. Chemical denture cleaners appear to have rather low efficacy to remove mature Candida albicans biofilms.