Nickel(II) and copper(II) complexes of mixed benzene-triazolehemiporphyrazines

The kinetics of substitution reactions of [η-CpFe(CO)₃]PF₆ with PPh₃ in the presence of R-PyOs have been studied. For all the R-PyOs (R = 4-OMe, 4-Me, 3,4-(CH)₄, 4-Ph, 3-Me, 2,3-(CH)₄, 2,6-Me₂, 2-Me), the reactions yeild the same product [η⁵-CpFe(CO)₂PPh₃]PF₆, according to a second-order rate law that is first order in concentrations of [η⁵-CpFe(CO)₃]PF₆ and of R-PyO but zero order in PPh₃ concentration. These results, along with the dependence of the reaction rate on the nature of R-PyO, are consistent with an associative mechanism. Activation parameters further support the bimmolecular nature of the reactions: ΔH^≠ = 13.4 ± 0.4 kcal mol⁻¹, ΔS^≠ = −19.1 ± 1.3 cal k⁻¹ mol⁻¹ for 4-PhPyO; ΔH^≠ = 12.3 ± 0.3 kcal mol⁻¹, ΔS^≠ = 24.7 ±1.0 cal K⁻¹ mol⁻¹ for 2-MePyO. For the various substituted pyridine N-oxides studied in this paper, the rates of reaction increase with the increasing electron-donating abilities of the substituents on the pyridine ring or N-oxide basicities, but decrease with increasing ¹⁷O chemical shifts of the N-oxides. Electronic and steric factors contributing to the reactivity of pyridine N-oxides have been quantitatively assessed.     

Rate constants and activation parameters for organo-cobalt porphyrin bond homolysis from NMR relaxation times

¹H NMR line broadening is found to be an effective complimentary method to chemical trapping for determining the rates and activation parameters for organo-metal bond homolysis events that produce freely diffusing radicals. Application of this method is illustrated by measurement of bond homolysis activation parameters for a series of organo-cobalt porphyrin complexes ((TPP)Co-C(CH₃)₂CN (ΔH^≠ = 19.5±0.9 kcal mol⁻¹, ΔS^≠ = 12±3 cal°K⁻¹ mol⁻¹), (TMP)Co-C(CH₃)₂CN (ΔH^≠ = 20±1 kcal mol⁻¹,ΔS^≠ = 13±2 cal°K⁻¹ mol⁻¹), (TAP)Co-C(CH₃)₂CO₂CH₃ (ΔH^≠ = 18.2±0.5 kcal mol⁻¹, ΔS^≠ = 12±2 cal °K⁻¹ mol⁻¹), (TAP)Co-CH(CH₃)C₆H₅ (ΔH^≠ = 22.5±0.5, ΔS^≠ = 17±2 cal °K⁻¹ mol⁻¹)). The line broadening method is particularly useful in determining activation parameters for dissociation of weakly bonded organometallics where the rate of homolysis can exceed the range measurable by conventional chemical trapping methods.     

Model reactions of a carbonylation catalyst: phosphite induced migratory CO insertion in [MeIr(CO)2I3]

Carbonylation of the anionic iridium(III) methyl complex, [MeIr(CO)₂I₃]⁻ (1) is an important step in the new iridium-based process for acetic acid manufacture. A model study of the migratory insertion reactions of 1 with P-donor ligands is reported. Complex 1 reacts with phosphites to give neutral acetyl complexes, [Ir(COMe)(CO)I₂L₂] (L = P(OPh)₃ (2), P(OMe)₃ (3)). Complex 2 has been isolated and fully characterised from the reaction of Ph₄As[MeIr(CO)₂I₃] with AgBF₄ and P(OPh)₃; comparison of spectroscopic properties suggests an analogous formulation for 3. IR and ³¹P NMR spectroscopy indicate initial formation of unstable isomers of 2 which isomerise to the thermodynamic product with trans phosphite ligands. Kinetic measurements for the reactions of 1 with phosphites in CH₂Cl₂ show first order dependence on [1], only when the reactions are carried out in the presence of excess iodide. The rates exhibit a saturation dependence on [L] and are inhibited by iodide. The reactions are accelerated by addition of alcohols (e.g. 18× enhancement for L = P (OMe)₃ in 1:3 MeOH-CH₂Cl₂). A reaction mechanism is proposed which involves substitution of an iodide ligand by phosphite, prior to migratory CO insertion. The observed rate constants fit well to a rate law derived from this mechanism. Analysis of the kinetic data shows that k₁, the rate constant for iodide dissociation, is independent of L, but is increased by a factor of 18 on adding 25% MeOH to CH₂Cl₂. Activation parameters for the k₁ step are ΔH^≠ = 71 (±3) kJ mol⁻, ΔS^≠ = −81 (±9) J mol⁻¹ K⁻¹ in CH₂Cl₂ and ΔH^≠ = 60(±4) kJ mol⁻¹, ΔS^≠ = −93(± 12) J mol⁻¹ K⁻¹ in 1:3 MeOH-CH₂Cl₂. Solvent assistance of the iodide dissociation step gives the observed rate enhancement in protic solvents. The mechanism is similar to that proposed for the carbonylation of 1.     

Kinetics and mechanism of the stoichiometric oxygenation of [Cu(fla)(idpa)]ClO4 [fla=flavonolate, IDPA=3,3′-imino-bis(N,N-dimethylpropylamine)] and the [Cu(fla)(idpa)]ClO4-catalysed oxygenation of flavonol

Oxygenation of [Cu^II(fla)(idpa)]ClO₄ (fla=flavonolate; IDPA=3,3′-iminobis(N,N-dimethylpropylamine)) in dimethylformamide gives [Cu^II(idpa)(O-bs)]ClO₄ (O-bs=O-benzoylsalicylate) and CO. The oxygenolysis of [Cu^II(fla)(idpa)]ClO₄ in DMF was followed by electronic spectroscopy and the rate law −d[{Cu^II(fla)(idpa)}ClO₄]/dt=k_obs[{Cu^II(fla)(idpa)}ClO₄][O₂] was obtained. The rate constant, activation enthalpy and entropy at 373 K are k_obs=6.13±0.16×10⁻³ M⁻¹ s⁻¹, ΔH^‡=64±5 kJ mol⁻¹, ΔS^‡=−120±13 J mol⁻¹ K⁻¹, respectively. The reaction fits a Hammett linear free energy relationship and a higher electron density on copper gives faster oxygenation rates. The complex [Cu^II(fla)(idpa)]ClO₄ has also been found to be a selective catalyst for the oxygenation of flavonol to the corresponding O-benzoylsalicylic acid and CO. The kinetics of the oxygenolysis in DMF was followed by electronic spectroscopy and the following rate law was obtained: −d[flaH]/dt=k_obs[{Cu^II(fla)(idpa)}ClO₄][O₂]. The rate constant, activation enthalpy and entropy at 403 K are k_obs=4.22±0.15×10⁻² M⁻¹ s⁻¹, ΔH^‡=71±6 kJ mol⁻¹, ΔS^‡=−97±15 J mol⁻¹ K⁻¹, respectively.     

Ricochet inter-ring haptotropic rearrangement of σ-methyl-(η-indenyl) chromium tricarbonyls. Experimental kinetic and theoretical DFT study

σ-Methyl-(η⁵-indenyl) chromium tricarbonyl (III) rearranges quantitatively into η⁶-1-endo-methylindene) chromium tricarbonyl (IV) in C₆D₆ solution at 30–60°C. Methyl group attachment to the positions 2 or 3 of indenyl ligand in (III) has no influence on the activation parameters of this ricochet inter-ring haptotropic rearrangement (ΔG^#=23.6 kcal mol⁻¹; ΔH^#=18.9±0.2 kcal mol⁻¹; ΔS^#=−18.6±0.2 cal K⁻¹ mol⁻¹). (IV) undergoes further irreversible isomerization at 60–120° into (ν⁶-3-methylindene) chromium tricarbonyl (V) with a higher activation barrier (ΔG^#=28.5±0.1 kcal mol⁻¹) via two consecutive [1,5]-sigmatropic hydrogen shifts. The mechanisms of both rearrangements have been studied in detail using density functional theory (DFT) calculations with extended basis sets. Calculations show that the rearrangement (III) → (IV) proceeds in two steps. Methyl group migration from chromium into position 1 of the indenyl ligand is the rate-determining step leading to the formation of the 16-electron intermediate (VII). The calculated activation barrier (E_a=19.6 kcal mol⁻¹) is in good agreement with the experimental one. Further rearrangement (VII) → (V) proceeds via a trimethylenemethane-type transition state (XVIII) with an activation barrier 11.8 kcal mol⁻¹. The coordination of the chromium tricarbonyl group at the six-membered ring has only minor influence on the kinetic parameters of the hydrogen [1,5]-sigmatropic shift in indene.     

3nion-independent conformational ordering in iota-carrageenan: Disorder-order equilibria and dynamics

The equilibria and dynamics of the disorder-to-order transition of the anionic polysaccharide iota-carrageenan have been studied in the presence of tetramethyl-ammonium salts. By the use of a stopped-flow polarimeter, the rate equation and temperature dependence of the observed forward rate-constant were found to accord with a co-operative dimerisation process. Activation parameters for helix nucleation were shown to be independent of the anion for solutions containing tetramethylammonium chloride and bromide, i.e., ΔH^‡ = 1 ±3 kJ.mol⁻¹, ΔS^‡ = −178 ±10 J.mol⁻¹.K⁻¹, ΔG^‡_298K = 54 ±2 kJ.mol⁻¹, and k_nuc,298K = 1880 ±80 dm³.mol⁻¹.s⁻¹. The temperature dependence of optical rotation was also shown to be independent of the anion present.     

Pressure effects on the rates of Hg-assisted chloride release from some [CrCl(diamine)(triamine)] complexes

The rate of Hg²⁺-assisted chloride release from several mer-[CrCl(diamine)(triamine)]²⁺ complexes has been measured as a function of pressure, Hg²⁺ concentration and temperature. The calculated activation volumes are independent of [Hg²⁺] and temperature and kinetic parametes 10⁴ k_Hg (25 °c) (M⁻¹ s⁻¹), ΔH^‡ (kJ mol⁻¹), ΔS^‡ (J K⁻¹ mol⁻¹), ΔV^‡ (cc mol⁻¹) are: (en)(dpt): 6.44. 75.5, −52, −5.0; (ibn)(dpt): 5.81, 89.5, −6, −0.03; (Me₂tn)(dpt): 22.2, 84.9, −11, −0.5; (tn)(dpt): 29.1, 87, −1, +0.3; (en)(2,3-tri): 1.94, 87.0, −24, −5.7; (en)(Medpt): 0.417, 94.6, −11, −0.8; (tn)(Medpt): 9.14, 98.3, +26, +1.8.     

Experimental and theoretical study of a truly functional biomimetic molybdenum oxotransferase analogue system

Density functional theory (DFT) computations at the B3LYP/Lanl2DZ level were used to elucidate the oxygen atom transfer (OAT) and coupled electron proton transfer (CEPT) reaction steps involved in the biomimetic catalytic cycle performed by polymer-supported Mo^VIO₂(NN′)₂ complexes [NN′ = phenyl-(pyrrolato-2-ylmethylene)-amine] with water as oxygen source, trimethyl-phosphane as oxygen acceptor and one-electron oxidising agents. The DFT method employed has been validated against experimental data [X-ray crystal structures of a NN′ ligand and a Mo^VIO₂(NN′)₂ complex as well as kinetic data]. The rate-limiting step in the forward-OAT from [Mo^VIO₂] to PMe₃ is the attack of PMe₃ at an oxo ligand with ΔG^≠ (298 K) = 64.6 kJ mol⁻¹. Dissociation of the product OPMe₃ is facile with ΔG^≠ (298 K) = 26.3 kJ mol⁻¹ giving a mono-oxo [Mo^IVO] complex which fills its coordination sphere with a further PMe₃ substrate with ΔG^≠ (298 K) = 39.2 kJ mol⁻¹. One-electron oxidation to a Mo(V) phosphane complex precedes the coordination of water/hydroxide. Additionally, the comproportionation of [Mo^VIO₂] and [Mo^IVO] to dinuclear oxo-bridged [OMo^V–O–Mo^VO] species has been calculated as the thermodynamic sink in this system and the back-OAT from dmso to mono-oxo [Mo^IVO] to give [Mo^VIO₂] has been shown to involve an equilibrium between stereoisomeric [Mo^VIO₂] complexes with an activation barrier of ΔG^≠ (298 K) = 113.1 kJ mol⁻¹.     

Rate of electron transfer between plastocyanin, cytochrome ƒ, related proteins and artificial redox reagents in solution

The rate of electron transfer between reduced cytochrome ƒ and plastocyanin (both purified from parsley) has been measured as k = 3.6 · 10⁷ M⁻¹ · s⁻¹, at 298 °K and pH 7.0, with activation parameters ΔH^‡ = 44 kJ · mole⁻¹ and ΔS^‡ = +46 J · mole⁻¹ · °K⁻¹. Replacement of cytochrome ƒ with red algal cytochrome c-553, Pseudomonas cytochrome c-551 and mammalian cytochrome c gave rates at least 30 times slower: k = 5 · 10⁵, 7.5 · 10⁵ and 1.0 · 10⁶ M⁻¹ · s⁻¹, respectively.

Similar measurements made with azurin instead of plastocyanin gave k = 6 · 10⁶ and approx. 2 · 10⁷ M⁻¹ · s⁻¹ for reaction of reduced azurin with cytochrome ƒ and algal cytochrome respectively.

Rate constants of 115 and 80 M⁻¹ · s⁻¹ were found for reduction of plastocyanin by ascorbate and hydroquinone at 298 °K and pH 7.0. The rate constants for the oxidation of plastocyanin, cytochrome ƒ, Pseudomonas cytochrome c-551 and red algal cytochrome c-553 by ferricyanide were found to be between 3 · 10⁴ and 8 · 10⁴ M⁻¹ · s⁻¹.

The results are discussed in relation to photosynthetic electron transport.     

Thermodynamics of the disproportionation of adenosine 5'-diphosphate to adenosine 5'-triphosphate and adenosine 5'-monophosphate, II. Experimental data

High-pressure liquid-chromatography and microcalorimetry have been used to determine equilibrium constants and enthalpies of reaction for the disproportionation reaction of adenosine 5′-diphosphate (ADP) to adenosine 5′-triphosphate (ATP) andadenosine 5′-monophosphate (AMP). Adenylate kinase was used to catalyze this reaction. The measurements were carried out over the temperature range 286 to 311 K, at ionic strengths varying from 0.06 to 0.33 mol kg⁻¹, over the pH range 6.04 to 8.87, and over the pMg range 2.22 to 7.16, where pMg = -log a(Mg²⁺). The equilibrium model developed by Goldberg and Tewari (see the previous paper in this issue) was used for the analysis of the measurements. Thus, for the reference reaction: 2 ADp³⁻ (ao) AMp²⁻ (ao)+ ATp⁻ (ao), K° = 0.225 ± 0.010, ΔG° = 3.70 +- 0.11 kJ mol ⁻¹, ΔH° = −1.5 ± 1. 5 kJ mol ⁻¹, °S ° = −17 ± 5 J mol⁻¹ K⁻¹, and ACP_p°≈ = −46 J mo1l⁻¹ K⁻¹ at 298.15 K and 0.1 MPa. These results and the thermodynamic parameters for the auxiliary equilibria in solution have been used to model the thermodynamics of the disproportionation reaction over a wide range of temperature, pH, ionic strength, and magnesium ion morality. Under approximately physiological conditions (311.15 K, pH 6.94, [Mg²⁺] = 1.35 × 10⁻³ mol kg⁻¹, and I = 0.23 mol kg⁻¹) the apparent equilibrium constant (K_A′ = m(ΣAMP)m(ΣATP)/[ m(ΣADP)]²) for the overall disproportionation reaction is equal to 0.93 ± 0.02. Thermodynamic data on the disproportionation reaction and literature values for this apparent equilibrium constant in human red blood cells are used to calculate a morality of 1.94 × 10⁻⁴ mol kg⁻¹ for free magnesium ion in human red blood cells. The results are also discussed in relation to thermochemical cycles and compared with data on the hydrolysis of the guanosine phosphates.     

Studies on the kinetics and mechanism of anation reactions of some six-coordinate complexes of chromium(III) in aqueous solution

Rates of stepwise anation of cis-Cr(ox)₂(H₂O₂)⁻ with SCN⁻/N₃⁻, Cr(acac)₂(H₂O)₂⁺ with SCN⁻ and Cr(atda)(H₂O)₂ with SCN⁻ have been investigated in weakly acidic aqueous solutions. Rate constants, k_I and k_II for the two steps in each system, are composite as k_x = k_x⁰+k_x^X[X⁻] (x = I, II; X⁻ = SCN⁻, N₃⁻). These rate constants have been evaluated also as the corresponding ΔH^≠ and ΔS^≠ values. The results obtained and the plausible I_d mechanism seem to suggest Cr---OOC bond dissociation (hence a strongly negative ΔS^≠) generating the transition state in each system with outer-sphere association forming the precursor complex in the X⁻ dependent paths.     

The migratory insertion of carbon monoxide in pentamethylcyclopentadienyliridium (III) complexes. Structural effects on reactivity and mechanism for rhodium and iridium systems

The reactions of complex (C₅Me₅)Ir(Cl) (CO) (Me) (1a) with cyclohexylisocyanide and phosphines (L=CyNC, PHPh₂, PMePh₂, PMe₂Ph) give the products of alkyl migratory insertion (C₅Me₅Ir(Cl) (COMe) (L), in toluence or tetrahydrofuran at 323 K or higher temperature. The phenyl analogue (C₅Me₅)Ir(Cl)(CO)(Ph) or the iodide complexes (C₅Me₅)Ir(I) (CO) (R) (R=Me, Ph_are not reactive under the same conditions. The reaction of (C₅Me₅)Ir(Cl)(CO)(Me) with PMePh₂ and PMe₂Ph in acetonitrile yields the chloride substitution product [(C₅Me₅)Ir(CO)(L)(Me)]⁺Cl⁻. Kinetic measurements for the reactions of (C₅Me₅)Ir(Cl)(CO)(Me) in toluene are first order in the iridium complex and exhibit a saturation dependence on the incoming donors L. Analysis of the data suggests a two-step process involving (i) rapid formation of a molecular complex [(C₅Me₅)Ir(Cl)(CO)(Me), (L)], in which the structure of 1a is unperturbed within the limits of spectroscopic analysis, and (ii) rate determining methyl migration. The reaction parameters are K for the pre-equilibrium step (K = 1.5 (CyNC), 7.3 (PHPh₂), 7.1 (PMePh₂) dm³ mol⁻¹ at 323 K) and k₂ for the slow carbon---carbon bond formation (k₂ (10⁵) = 6.9 (CyNC), 1.2 (PHPh₂), 1.0 (PMePh₂) s⁻¹ at 323 K). The activation parameters for the methyl migration step in the reaction with PMePh₂ obtained between 308 and 338 K, are ΔH^≠ = 106±16 kJ mol⁻¹ and ΔS^≠ = − 14±5 J K⁻¹ mol⁻¹. The reaction of 1a with PMePh₂ proceeds at similar rates in tetrahydrofuran (K = 3.7 dm³ mol⁻¹, k₂ (10⁵) = 1.2 s⁻¹, 323 K). The crystal structure of (C₅Me₅)Ir(Cl)(COMe) (PMe₂Ph) has been determined by X-ray diffraction. C₂₀H₂₉ClOPIr: M_r = 544.1, monoclinic, P2₁/n, A = 8.084 (2), B = 9.030(2), C = 28.715 (3) Å, β = 91.41 (3)°, Z = 4, D_c = 1.71 g cm⁻³, V = 2095.5 ų, room temperatyre, Mo K, γ = 0.71069, μ = 65.55 cm⁻¹, F(000) = 1044, R = 0.037 for 2453 independent observed reflections. The complex shows a deformed tetrahedral coordination assuming the η⁵-C₅Me₅ molecular fragment as a single coordination site. The iridium-chlorine bond is staggered with respect to two adjacent C(ring)-methyl bonds, while the Ir---P and the Ir---COMe bonds are eclipsed with respect to C(ring)-methyl bonds.     

Heats of reaction of HMo(CO)3(C5R5) (R = H, CH3) with diphenyldisulfide and of formation of the clusters [PhSMo(CO)x(C5H5)]2, X = 1,2. Thermodynamic study of molybdenum-sulfur bond strengths

The enthalpies of reaction of HMo(CO)₃C₅R₅ (R = H, CH₃) with diphenyldisulfide producing PhSMo(CO)₃C₅R₅ and PhSH have been measured in toluene and THF solution (R = H, ΔH= −8.5 ± 0.5 kcal mol⁻¹ (tol), −10.8 ± 0.7 kcal mol⁻¹ (THF); R = CH₃, ΔH = −11.3±0.3 kcal mol⁻¹ (tol), −13.2±0.7 kcal mol⁻¹ (THF)). These data are used to estimate the Mo---SPh bond strength to be on the order of 38–41 kcal mol⁻¹ for these complexes. The increased exothermicity of oxidative addition of disulfide in THF versus toluene is attributed to hydrogen bonding between thiophenol produced in the reaction and THF. This was confirmed by measurement of the heat of solution of thiophenol in toluene and THF. Differential scanning calorimetry as well as high temperature calorimetry have been performed on the dimerization and subsequent decarbonylation reactions of PhSMo(CO)₃Cp yielding [PhSMo(CO)₂Cp]₂ and [PhSMo(CO)Cp]₂. The enthalpies of reaction of PhSMo(CO)₃Cp and [PhSMo(CO)₂Cp]₂ with PPh₃, PPh₂Me and P(OMe)₃ have also been measured. The disproportionation reaction: 2[PhSMo(CO)₂Cp]₂ → 2PhSMo(CO)₃Cp + [PhSMP(CO)Cp]₂ is reported and its enthalpy has also been measured. These data allow determination of the enthalpy of formation of the metal-sulfur clusters [PhSMo(CO)_nC₅H₅]₂, N = 1,2.     

The kinetics and energetics of formation of a molecular hydrogen complex involving a dinuclear ruthenium(II) centre

The reversible equilibrium conversion under H₂ of [RuCl(dppb) (μ-Cl)]₂ (1) to generate (η²-H₂) (dppb) (μ-Cl)₃RuCl(dppb) in CH₂Cl₂ (dppb = Ph₂P(CH₂)₄PPh₂) has been studied at 0–25 °C by UV-Vis and ³¹P{¹H} NMR spectroscopy, and by stoppe kinetics; the equilibrium constant and corresponding thermodynamic parameters, and the forward and reverse rate constants at 25 °C have been determined. A measured ΔH° value of 0 kJ mol⁻¹ allows for an estimation of an exothermicity of 60 kJ mol⁻¹ for binding an η²-H₂ at an Ru(II) centre; a ΔS° value of 60 J mol⁻¹ K⁻¹ indicates that in solution 1 contain s coordinated CH₂Cl₂. The kinetic and thermodynamic data are compared to those obtained from a previously studied hydrogenation of styrene catalyzed by 1. Preliminary findings on related systems containing Ph₂P(CH₂)₃PPh₂ and (C₆H₁₁)₂P(C₆H₁₁)₂ are also noted.     

The influence of temperature on catalytic efficiency of pyruvate kinase of crickets (Orthoptera: gryllidae)

Investigations have been conducted to determine the chemical nature of immediate temperature-regulatory mechanisms for enzyme activity, such as positive or negative temperature modulation and an adaptation-temperature dependence of the free energy of activation ΔG^≠. Three species of crickets have been selected for experiments in consideration of their different natural temperature demands: Gryllus campestris, Gryllus bimaculatus, and Acheta domesticus. Discontinuous Arrhenius plots (Fig. 1) show that all pyruvate kinases can exist in at least two temperature-dependent conformational states. Sizes of ΔH^≠-and ΔG^≠-values are correlated with the species' adaptation temperature (Table 1). Decreased barriers of ΔG^≠ after cold adaptation in G. campestris and A. domesticus are not sufficient for complete temperature compensation of the catalytic efficiency. Maximum enzyme-substrate affinity closely corresponds to the acclimation temperature of the crickets (Fig.2); K_m-values for PEP, however, are hardly influenced by experimental temperatures within the normal temperature range of the species. Data on enzyme function appear to corroborate the idea that optimal catalytic properties will be set according to the highest temperatures experienced respectively.     

Kinetics and mechanisms of ligand substitution reactions of molybdenum SO2 complexes. Synthesis and X-ray structure of trans-Mo(CO)2 (dmpe) (PPh3) (SO2)

Kinetic results are reported for intramolecular PPh₃ substitution reactions of Mo(CO)₂(η¹-L)(PPh₃)₂(SO₂) to form Mo(CO)₂(η²-L)(PPh₃)(SO₂) (L = DMPE = (Me)₂PC₂H₄P(Me)₂ and dppe=Ph₂PC₂H₄PPh₂) in THF solvent, and for intermolecular SO₂ substitutions in Mo(CO)₃(η²-L)(η²-SO₂) (L = 2,2′-bipyridine, dppe) with phosphorus ligands in CH₂Cl₂ solvent. Activation parameters for intramolecular PPh₃ substitution reactions: ΔH^≠ values are 12.3 kcal/mol for dmpe and 16.7 kcal/mol for dppe; ΔS^≠ values are −30.3 cal/mol K for dmpe and −16.4 cal/mol K for dppe. These results are consistent with an intramolecular associative mechanism. Substitutions of SO₂ in MO(CO)₃(η²-L)(η²-SO₂) complexes proceed by both dissociative and associative mechanisms. The facile associative pathways for the reactions are discussed in terms of the ability of SO₂ to accept a pair of electrons from the metal, with its bonding transformations of η²-SO₂ to η¹-pyramidal SO₂, maintaining a stable 18-e count for the complex in its reaction transition state. The structure of Mo(CO)₂(dmpe)(PPh₃)(SO₂) was determined crystallographically: P2₁/c, A=9.311(1), B = 16.344(2), C = 18.830(2) Å, ß=91.04(1)°, V=2865.1(7) ų, Z=4, R(F)=3.49%.     

Alkene rotation in [Ru(η-C5H5) (L2) (η-alkene][CF3SO3] with L2 = iPr- or pTol-diazabutadiene. X-ray crystal structure of [Ru(η-C5H5(pTol-DAB) (η-ethene][CF3SO3]

Reaction of RuCl(η⁵-C₅H₅(pTol-DAB) with AgOTf (OTf = CF₃SO₃) in CH₂Cl₂ or THF and subsequent addition of L′ (L′ = ethene (a), dimethyl fumarate (b), fumaronitrile (c) or CO (d) led to the ionic complexes [Ru(η⁵-C₅H₅)(pTol-DAB)(L′)][OTf] 2a, 2b and 2d and [Ru(η⁵-C₅H₅)(pTol-DAB)(fumarontrile-N)][OTf] 5c. With the use of resonance Raman spectroscopy, the intense absorption bands of the complexes have been assigned to MLCT transitions to the iPr-DAB ligand. The X-ray structure determination of [Ru(η⁵-C₅H₅)(pTol-DAB)(η²-ethene)][CF₃SO₃] (2a) has been carried out. Crystal data for 2a: monoclinic, space group P2₁/n with A = 10.840(1), b = 16.639(1), C = 14.463(2) Å, β = 109.6(1)°, V = 2465.6(5) ų, Z = 4. Complex 2a has a piano stool structure, with the Cp ring η⁵-bonded, the pTol-DAB ligand σN, σN′ bonded (Ru-N distances 2.052(4) and 2.055(4) Å), and the ethene η²-bonded to the ruthenium center (Ru-C distances 2.217(9) and 2.206(8) Å). The C = C bond of the ethene is almost coplanar with the plane of the Cp ring, and the angle between the plane of the Cp ring and the double of the ethene is 1.8(0.2)°. The reaction of [RuCl(η⁵-C₅H₅)(PPh)₃ with AgOTf and ligands L′ = a and d led to [Ru(η⁵-C₅H₅)(PPh₃)₂(L′)]OTf] (3a) and (3d), respectively. By variable temperature NMR spectroscopy the rottional barrier of ethene (a), dimethyl fumarate (b and fumaronitrile (c) in complexes [Ru(η⁵-C₅H₅)(L₂)(η²-alkene][OTf] with L₂ = iPr-DAB (a, 1b, 1c), pTol-DAB (2a, 2b) and L = PPh₃ (3a) was determined. For 1a, 1b and 2b the barrier is 41.5±0.5, 62±1 and 59±1 kJ mol⁻¹, respectively. The intermediate exchange could not be reached for 1c, and the ΔG^# was estimated to be at least 61 kJ mol⁻. For 2a and 3a the slow exchange could not be reached. The rotational barrier for 2a was estimated to be 40 kJ mol⁻. The rotational barier for methyl propiolate (HC≡CC(O)OCH₃) (k) in complex [Ru(η⁵-C₅H₅)(iPr-DAB) η²-HC≡CC(O)OCH₃)][OTf] (1k) is 45.3±0.2 kJ mol⁻¹. The collected data show that the barrier of rotational of the alkene in complexes 1a, 2a, 1b, 2b and 1c does not correlate with the strength of the metal-alkene interaction in the ground state.     

Reaction heat measurements in the enzymatic hydrolysis reaction of penicillin GK to obtain 6-APA

The purpose of this study was to measure heats involved in the hydrolysis process for the industrial production of 6-aminopenicillanic acid (6-APA) using dynamic calorimetry techniques. The experimental design was planned using Hess' law. The information derived from the calorimeter was correlated mathematically to determine the heat released during enzymatic hydrolysis. This is important for temperature control systems and reactor design. The results obtained with the calorimetric measurements at 308 K and pH 7.5 are the penicillin hydrolysis, ΔH_hydrol, at 35.9 ± 5.7 kJ mol⁻¹ and phenyl acetic acid neutralization, ΔH_neut, at −47.1 ± 3.8 kJ mol⁻¹.     

Temperature dependence study of five-coordinate complex formation of zinc(II) octaethyl and tetraphenylporphyrin

Five coordinate complex formation of zinc(II)–octaethylporphyrin (Zn(OEP)) and zinc(II)–tetraphenylporphyrin (Zn(TPP)) have been studied in the presence of seven systematically selected electron donor molecules. Stability constants in toluene were determined at various temperature ranged between 20 and 60°C by absorption and steady-state fluorescent measurements from which thermodynamic parameters were determined. Depending on the porphyrin and the axial ligand the entropy is changing between −127 and −61 J mol⁻¹ K⁻¹ while the enthalpy is ranging from −49 to −24 kJ mol⁻¹.     

Structure and thermal decomposition of methylamine borane

The crystal structure of methylamine borane has been determined and contains parallel chains of dihydrogen-bonded CH₃NH₂BH₃ molecules. Thermal decomposition takes place from the melt (ΔH_fusion = 8.5 kJ mol⁻¹) and begins with the formation of an ionic borohydride. Hydrogen is liberated in two stages, at ca. 100 and 190 °C, with the observed rates during the first stage (ΔH = −25 kJ mol⁻¹, E_a = 115 kJ mol⁻¹) strongly dependent on temperature and time. cis- and trans-N-trimethylcyclotriborazane are formed during the first stage and subsequently cross-link to yield a non-volatile solid. Before this cross-linking, the system exhibited a high degree of volatility, with weight losses in excess of 80% observed in TG experiments using flowing gas.