Toward a Reversible Mn4+/Mn2+ Redox Reaction and Dendrite‐Free Zn Anode in Near‐Neutral Aqueous Zn/MnO2 Batteries via Salt Anion Chemistry

Rechargeable aqueous Zn/MnO₂ batteries are very attractive large‐scale energy storage technologies, but still suffer from limited cycle life and low capacity. Here the novel adoption of a near‐neutral acetate‐based electrolyte (pH ≈ 6) is presented to promote the two‐electron Mn⁴⁺/Mn²⁺ redox reaction and simultaneously enable a stable Zn anode. The acetate anion triggers a highly reversible MnO₂/Mn²⁺ reaction, which ensures high capacity and avoids the issue of structural collapse of MnO₂. Meanwhile, the anode‐friendly electrolyte enables a dendrite‐free Zn anode with outstanding stability and high plating/stripping Coulombic efficiency (99.8%). Hence, a high capacity of 556 mA h g^?1, a lifetime of 4000 cycles without decay, and excellent rate capability up to 70 mA cm^?2 are demonstated in this new near‐neutral aqueous Zn/MnO₂ battery by simply manipulating the salt anion in the electrolyte. The acetate anion not only modifies the surface properties of MnO₂ cathode but also creates a highly compatible environment for the Zn anode. This work provides a new opportunity for developing high‐performance Zn/MnO₂ and other aqueous batteries based on the salt anion chemistry.     

High‐Performance Reversible Aqueous Zn‐Ion Battery Based on Porous MnOx Nanorods Coated by MOF‐Derived N‐Doped Carbon

Rechargeable aqueous zinc‐ion batteries (ZIBs) have been emerging as potential large‐scale energy storage devices due to their high energy density, low cost, high safety, and environmental friendliness. However, the commonly used cathode materials in ZIBs exhibit poor electrochemical performance, such as significant capacity fading during long‐term cycling and poor performance at high current rates, which significantly hinder the further development of ZIBs. Herein, a new and highly reversible Mn‐based cathode material with porous framework and N‐doping (MnO_x@N‐C) is prepared through a metal–organic framework template strategy. Benefiting from the unique porous structure, conductive carbon network, and the synergetic effect of Zn²⁺ and Mn²⁺ in electrolyte, the MnO_x@N‐C shows excellent cycling stability, good rate performance, and high reversibility for aqueous ZIBs. Specifically, it exhibits high capacity of 305 mAh g^?1 after 600 cycles at 500 mA g^?1 and maintains achievable capacity of 100 mAh g^?1 at a quite high rate of 2000 mA g^?1 with long‐term cycling of up to 1600 cycles, which are superior to most reported ZIB cathode materials. Furthermore, insight into the Zn‐storage mechanism in MnO_x@N‐C is systematically studied and discussed via multiple analytical methods. This study opens new opportunities for designing low‐cost and high‐performance rechargeable aqueous ZIBs.     

A High Energy Density Aqueous Battery Achieved by Dual Dissolution/Deposition Reactions Separated in Acid‐Alkaline Electrolyte

Aqueous batteries are facing big challenges in the context of low working voltages and energy density, which are dictated by the narrow electrochemical window of aqueous electrolytes and low specific capacities of traditional intercalation‐type electrodes, even though they usually represent high safety, low cost, and simple maintenance. For the first time, this work demonstrates a record high‐energy‐density (1503 Wh kg^?1 calculated from the cathode active material) aqueous battery system that derives from a novel electrolyte design to expand the electrochemical window of electrolyte to 3 V and two high‐specific‐capacity electrode reactions. An acid‐alkaline dual electrolyte separated by an ion‐selective membrane enables two dissolution/deposition electrode redox reactions of MnO₂/Mn²⁺ and Zn/Zn(OH)₄^2? with theoretical specific capacities of 616 and 820 mAh g^?1, respectively. The newly proposed Zn–Mn²⁺ aqueous battery shows a high Coulombic efficiency of 98.4% and cycling stability of 97.5% of discharge capacity retention for 1500 cycles. Furthermore, in the flow battery based on Zn–Mn²⁺ pairs, more excellent stability of 99.5% of discharge capacity retention for 6000 cycles is achieved due to greatly improved reversibility of the Zn anode. This work provides a new path for the development of novel aqueous batteries with high voltage and energy density.     

A Novel High Capacity Positive Electrode Material with Tunnel‐Type Structure for Aqueous Sodium‐Ion Batteries

Aqueous sodium‐ion batteries have shown desired properties of high safety characteristics and low‐cost for large‐scale energy storage applications such as smart grid, because of the abundant sodium resources as well as the inherently safer aqueous electrolytes. Among various Na insertion electrode materials, tunnel‐type Na_0.44MnO₂ has been widely investigated as a positive electrode for aqueous sodium‐ion batteries. However, the low achievable capacity hinders its practical applications. Here, a novel sodium rich tunnel‐type positive material with a nominal composition of Na_0.66[Mn_0.66Ti_0.34]O₂ is reported. The tunnel‐type structure of Na_0.44MnO₂ obtained for this compound is confirmed by X‐ray diffraction and atomic‐scale spherical aberration‐corrected scanning transmission electron microscopy/electron energy‐loss spectrum. When cycled as positive electrode in full cells using NaTi₂(PO₄)₃/C as negative electrode in 1 m Na₂SO₄ aqueous electrolyte, this material shows the highest capacity of 76 mAh g^?1 among the Na insertion oxides with an average operating voltage of 1.2 V at a current rate of 2 C. These results demonstrate that Na_0.66[Mn_0.66Ti_0.34]O₂ is a promising positive electrode material for rechargeable aqueous sodium‐ion batteries.     

Accessing the Two‐Electron Charge Storage Capacity of MnO2 in Mild Aqueous Electrolytes

Rechargeable batteries based on MnO₂ cathodes, able to operate in mild aqueous electrolytes, have attracted attention due to their appealing features for the design of low‐cost stationary energy storage devices. However, the charge/discharge mechanism of MnO₂ in such media is still a matter of debate. Here, an in‐depth quantitative spectroelectrochemical analysis of MnO₂ thin‐films provides a set of unrivaled mechanistic insights. A major finding is that charge storage occurs through the reversible two‐electron faradaic conversion of MnO₂ into Mn²⁺ in the presence of a wide range of weak Brønsted acids, including the [Zn(H₂O)₆]²⁺ or [Mn(H₂O)₆]²⁺ complexes present in aqueous Zn/MnO₂ batteries. Furthermore, it is shown that buffered electrolytes loaded with Mn²⁺ are ideal to achieve highly reversible conversion of MnO₂ with both high gravimetric capacity and remarkably stable charging/discharging potentials. In the most favorable case, a record gravimetric capacity of 450 mA·h·g^?1 is obtained at a high rate of 1.6 A·g^?1, with a Coulombic efficiency close to 100% and a MnO₂ utilization of 84%. Overall, the present results challenge the common view on MnO₂ the charge storage mechanism in mild aqueous electrolytes and underline the benefit of buffered electrolytes for high‐performance rechargeable aqueous batteries.     

Review on Challenges and Recent Advances in the Electrochemical Performance of High Capacity Li‐ and Mn‐Rich Cathode Materials for Li‐Ion Batteries

Li and Mn‐rich layered oxides, xLi₂MnO₃·(1–x)LiMO₂ (M=Ni, Mn, Co), are promising cathode materials for Li‐ion batteries because of their high specific capacity that can exceed 250 mA h g^?1. However, these materials suffer from high 1^st cycle irreversible capacity, gradual capacity fading, low rate capability, a substantial charge‐discharge voltage hysteresis, and a large average discharge voltage decay during cycling. The latter detrimental phenomenon is ascribed to irreversible structural transformations upon cycling of these cathodes related to potentials ≥4.5 V required for their charging. Transition metal inactivation along with impedance increase and partial layered‐to‐spinel transformation during cycling are possible reasons for the detrimental voltage fade. Doping of Li, Mn‐rich materials by Na, Mg, Al, Fe, Co, Ru, etc. is useful for stabilizing capacity and mitigating the discharge‐voltage decay of xLi₂MnO₃·(1–x)LiMO₂ electrodes. Surface modifications by thin coatings of Al₂O₃, V₂O₅, AlF₃, AlPO₄, etc. or by gas treatment (for instance, by NH₃) can also enhance voltage and capacity stability during cycling. This paper describes the recent literature results and ongoing efforts from our groups to improve the performance of Li, Mn‐rich materials. Focus is also on preparation of cobalt‐free cathodes, which are integrated layered‐spinel materials with high reversible capacity and stable performance.     

Understanding the Rate Capability of High‐Energy‐Density Li‐Rich Layered Li1.2Ni0.15Co0.1Mn0.55O2 Cathode Materials

The high‐energy‐density, Li‐rich layered materials, i.e., xLiMO₂(1‐x)Li₂MnO₃, are promising candidate cathode materials for electric energy storage in plug‐in hybrid electric vehicles (PHEVs) and electric vehicles (EVs). The relatively low rate capability is one of the major problems that need to be resolved for these materials. To gain insight into the key factors that limit the rate capability, in situ X‐ray absorption spectroscopy (XAS) and X‐ray diffraction (XRD) studies of the cathode material, Li_1.2Ni_0.15Co_0.1Mn_0.55O₂ [0.5Li(Ni_0.375Co_0.25 Mn_0.375)O₂·0.5Li₂MnO₃], are carried out. The partial capacity contributed by different structural components and transition metal elements is elucidated and correlated with local structure changes. The characteristic reaction kinetics for each element are identified using a novel time‐resolved XAS technique. Direct experimental evidence is obtained showing that Mn sites have much poorer reaction kinetics both before and after the initial activation of Li₂MnO₃, compared to Ni and Co. These results indicate that Li₂MnO₃ may be the key component that limits the rate capability of Li‐rich layered materials and provide guidance for designing Li‐rich layered materials with the desired balance of energy density and rate capability for different applications.     

Synthesis,Characterization, and Structural Modeling of High‐Capacity,Dual Functioning MnO2 Electrode/Electrocatalysts for Li‐O2 Cells

It has become clear that cycling lithium‐oxygen cells in carbonate electrolytes is impractical, as electrolyte decomposition, triggered by oxygen reduction products, dominates the cell chemistry. This research shows that employing an α‐MnO₂/ramsdellite‐MnO₂ electrode/electrocatalyst results in the formation of lithium‐oxide‐like discharge products in propylene carbonate, which has been reported to be extremely susceptible to decomposition. X‐ray photoelectron data have shown that what are likely lithium oxides (Li₂O₂ and Li₂O) appear to form and decompose on the air electrode surface, particularly at the MnO₂ surface, while Li₂CO₃ is also formed. By contrast, cells without α‐MnO₂/ramsdellite‐MnO₂ fail rapidly in electrochemical cycling, likely due to the differences in the discharge product. Relatively high electrode capacities, up to 5000 mAh/g (carbon + electrode/electrocatalyst), have been achieved with non‐optimized air electrodes. Insights into reversible insertion reactions of lithium, lithium peroxide (Li₂O₂) and lithium oxide (Li₂O) in the tunnels of α‐MnO₂, and the reaction of lithium with ramsdellite‐MnO₂, as determined by first principles density functional theory calculations, are used to provide a possible explanation for some of the observed results. It is speculated that a Li₂O‐stabilized and partially‐lithiated electrode component, 0.15Li₂O·α‐Li_xMnO₂, that has Mn^4+/3+ character may facilitate the Li₂O₂/Li₂O discharge/charge chemistries providing dual electrode/electrocatalyst functionality.     

Electrolytes toward High‐Voltage Na3V2(PO4)2F3 Positive Electrode Durable against Temperature Variation

High power and energy density, long cyclability, and tolerance for wide temperature (seasonal and daily operational temperature differences) must be considered to construct large‐scale sodium secondary batteries. In this regard, Na₃V₂(PO₄)₂F₃ (NVPF) has become a subject of interest as a high‐performance positive electrode material owing to its high energy density. However, the high operating voltage of NVPF causes continuous decomposition of electrolytes during cycles, resulting in significant capacity fading and low Coulombic efficiency. In this study, the electrochemical performance of the NVPF electrode in organic solvent electrolytes with and without additives and an ionic liquid is investigated at high voltage regimes over a wide temperature range (?20 °C to 90 °C). The results reveal that the performance of organic electrolytes is still insufficient even with additives, and the ionic liquid electrolyte demonstrates high electrochemical stability and cyclability with NVPF electrodes over a temperature range from ?20 °C to 90 °C, achieving stable cycling over 500 cycles. The detailed electrochemical analysis combined with X‐ray photoelectron and energy dispersive X‐ray spectroscopy indicates that a sturdy cathode electrolyte interphase layer around the electrode protects it from capacity fading at high voltage and elevated temperature, resulting in high Coulombic efficiency.     

Reducing Capacity and Voltage Decay of Co‐Free Li1.2Ni0.2Mn0.6O2 as Positive Electrode Material for Lithium Batteries Employing an Ionic Liquid‐Based Electrolyte

Lithium‐rich layered oxides (LRLOs) exhibit specific capacities above 250 mAh g^?1, i.e., higher than any of the commercially employed lithium‐ion‐positive electrode materials. Such high capacities result in high specific energies, meeting the tough requirements for electric vehicle applications. However, LRLOs generally suffer from severe capacity and voltage fading, originating from undesired structural transformations during cycling. Herein, the eco‐friendly, cobalt‐free Li_1.2Ni_0.2Mn_0.6O₂ (LRNM), offering a specific energy above 800 Wh kg^?1 at 0.1 C, is investigated in combination with a lithium metal anode and a room temperature ionic liquid‐based electrolyte, i.e., lithium bis(trifluoromethanesulfonyl)imide and N‐butyl‐N‐methylpyrrolidinium bis(fluorosulfonyl)imide. As evidenced by electrochemical performance and high‐resolution transmission electron microscopy, X‐ray photoelectron spectroscopy, and online differential electrochemical mass spectrometry characterization, this electrolyte is capable of suppressing the structural transformation of the positive electrode material, resulting in enhanced cycling stability compared to conventional carbonate‐based electrolytes. Practically, the capacity and voltage fading are significantly limited to only 19% and 3% (i.e., lower than 0.2 mV per cycle), respectively, after 500 cycles. Finally, the beneficial effect of the ionic liquid‐based electrolyte is validated in lithium‐ion cells employing LRNM and Li₄Ti₅O₁₂. These cells achieve a promising capacity retention of 80% after 500 cycles at 1 C.     

Atomic Structure of Li2MnO3 after Partial Delithiation and Re‐Lithiation

Li₂MnO₃ is the parent compound of the well‐studied Li‐rich Mn‐based cathode materials xLi₂MnO₃·(1‐x)LiMO₂ for high‐energy‐density Li‐ion batteries. Li₂MnO₃ has a very high theoretical capacity of 458 mA h g^?1 for extracting 2 Li. However, the delithiation and lithiation behaviors and the corresponding structure evolution mechanism in both Li₂MnO₃ and Li‐rich Mn‐based cathode materials are still not very clear. In this research, the atomic structures of Li₂MnO₃ before and after partial delithiation and re‐lithiation are observed with spherical aberration‐corrected scanning transmission electron microscopy (STEM). All atoms in Li₂MnO₃ can be visualized directly in annular bright‐field images. It is confirmed accordingly that the lithium can be extracted from the LiMn₂ planes and some manganese atoms can migrate into the Li layer after electrochemical delithiation. In addition, the manganese atoms can move reversibly in the (001) plane when ca. 18.6% lithium is extracted and 12.4% lithium is re‐inserted. LiMnO₂ domains are also observed in some areas in Li_1.63MnO₃ at the first cycle. As for the position and occupancy of oxygen, no significant difference is found between Li_1.63MnO₃ and Li₂MnO₃.     

Metallic Layered Polyester Fabric Enabled Nickel Selenide Nanostructures as Highly Conductive and Binderless Electrode with Superior Energy Storage Performance

Highly flexible and conductive fabric (CF)‐supported cauliflower‐like nickel selenide nanostructures (Ni₃Se₂ NSs) are facilely synthesized by a single‐step chronoamperometry voltage‐assisted electrochemical deposition (ECD) method and used as a positive electrode in supercapacitors (SCs). The CF substrate composed of multi‐layered metallic films on the surface of polyester fibers enables to provide high electrical conductivity as a working electrode in ECD process. Owing to good electrical conductivity, high porosity and intertwined fibrous framework of CF, cauliflower‐like Ni₃Se₂ NSs are densely integrated onto the entire surface of CF (Ni₃Se₂ NSs@CF) substrate with reliable adhesion by applying a chronoamperometry voltage of ?1.0 V for 240 s. The electrochemical performance of the synthesized cauliflower‐like Ni₃Se₂ NSs@CF electrode exhibits a maximum specific capacity (C _SC) of 119.6 mA h g^?1 at a discharge current density of 2 A g^?1 in aqueous 1 m KOH electrolyte solution. Remarkably, the specific capacity of the same electrode is greatly enhanced by introducing a small quantity of redox‐additive electrolyte into the aqueous KOH solution, indicating the C _SC≈251.82 mA h g^?1 at 2 A g^?1 with good capacity retention. Furthermore, the assembled textile‐based asymmetric SCs achieve remarkable electrochemical performance such as higher energy and power densities, which are able to light up different colored light‐emitting diodes.     

Bismuth Microparticles as Advanced Anodes for Potassium‐Ion Battery

Potassium‐ion batteries (KIBs) are important alternatives to lithium‐ and sodium‐ion batteries. Herein, microsized a Bi electrode delivers exceptional potassium storage capacity, stability, and rate capability by the formation of an elastic and adhesive oligomer‐containing solid electrolyte interface with the assistance of diglyme electrolytes. The kinetics‐controlled K–Bi phase transitions are unraveled combining electrochemical profiles, in situ X‐ray diffraction and density functional theory calculations. Reversible, stepwise Bi–KBi₂–K₃Bi₂–K₃Bi transitions govern the electrochemical processes after the initial continuous surface potassiation. The Bi electrode outperforms the other anode counterparts considering both capacity and potential. This work provides critical insights into the rational design of high‐performance anode materials for KIBs.     

Multicopper oxidase involvement in both Mn(II) and Mn(III) oxidation during bacterial formation of MnO2

Global cycling of environmental manganese requires catalysis by bacteria and fungi for MnO₂ formation, since abiotic Mn(II) oxidation is slow under ambient conditions. Genetic evidence from several bacteria indicates that multicopper oxidases (MCOs) are required for MnO₂ formation. However, MCOs catalyze one-electron oxidations, whereas the conversion of Mn(II) to MnO₂ is a two-electron process. Trapping experiments with pyrophosphate (PP), a Mn(III) chelator, have demonstrated that Mn(III) is an intermediate in Mn(II) oxidation when mediated by exosporium from the Mn-oxidizing bacterium Bacillus SG-1. The reaction of Mn(II) depends on O₂ and is inhibited by azide, consistent with MCO catalysis. We show that the subsequent conversion of Mn(III) to MnO₂ also depends on O₂ and is inhibited by azide. Thus, both oxidation steps appear to be MCO-mediated, likely by the same enzyme, which is indicated by genetic evidence to be the MnxG gene product. We propose a model of how the manganese oxidase active site may be organized to couple successive electron transfers to the formation of polynuclear Mn(IV) complexes as precursors to MnO₂ formation.     

Highly Reversible Oxygen‐Redox Chemistry at 4.1 V in Na4/7−x[□1/7Mn6/7]O2 (□: Mn Vacancy)

Increasing the energy density of rechargeable batteries is of paramount importance toward achieving a sustainable society. The present limitation of the energy density is owing to the small capacity of cathode materials, in which the (de)intercalation of ions is charge‐compensated by transition‐metal redox reactions. Although additional oxygen‐redox reactions of oxide cathodes have been recognized as an effective way to overcome this capacity limit, irreversible structural changes that occur during charge/discharge cause voltage drops and cycle degradation. Here, a highly reversible oxygen‐redox capacity of Na₂Mn₃O₇ that possesses inherent Mn vacancies in a layered structure is found. The cross validation of theoretical predictions and experimental observations demonstrates that the nonbonding 2p orbitals of oxygens neighboring the Mn vacancies contribute to the oxygen‐redox capacity without making the Mn?O bond labile, highlighting the critical role of transition‐metal vacancies for the design of reversible oxygen‐redox cathodes.     

MoS2 Nanosheets Vertically Aligned on Carbon Paper: A Freestanding Electrode for Highly Reversible Sodium‐Ion Batteries

The development of sodium‐ion batteries for large‐scale applications requires the synthesis of electrode materials with high capacity, high initial Coulombic efficiency (ICE), high rate performance, long cycle life, and low cost. A rational design of freestanding anode materials is reported for sodium‐ion batteries, consisting of molybdenum disulfide (MoS₂) nanosheets aligned vertically on carbon paper derived from paper towel. The hierarchical structure enables sufficient electrode/electrolyte interaction and fast electron transportation. Meanwhile, the unique architecture can minimize the excessive interface between carbon and electrolyte, enabling high ICE. The as‐prepared MoS₂@carbon paper composites as freestanding electrodes for sodium‐ion batteries can liberate the traditional electrode manufacturing procedure, thereby reducing the cost of sodium‐ion batteries. The freestanding MoS₂@carbon paper electrode exhibits a high reversible capacity, high ICE, good cycling performance, and excellent rate capability. By exploiting in situ Raman spectroscopy, the reversibility of the phase transition from 2H‐MoS₂ to 1T‐MoS₂ is observed during the sodium‐ion intercalation/deintercalation process. This work is expected to inspire the development of advanced electrode materials for high‐performance sodium‐ion batteries.     

Direct Growth of Flower‐Like δ‐MnO2 on Three‐Dimensional Graphene for High‐Performance Rechargeable Li‐O2 Batteries

A challenge still remains to develop high‐performance and cost‐effective air electrode for Li‐O₂ batteries with high capacity, enhanced rate capability and long cycle life (100 times or above) despite recent advances in this field. In this work, a new design of binder‐free air electrode composed of three‐dimensional (3D) graphene (G) and flower‐like δ‐MnO₂ (3D‐G‐MnO₂) has been proposed. In this design, graphene and δ‐MnO₂ grow directly on the skeleton of Ni foam that inherits the interconnected 3D scaffold of Ni foam. Li‐O₂ batteries with 3D‐G‐MnO₂ electrode can yield a high discharge capacity of 3660 mAh g^?1 at 0.083 mA cm^?2. The battery can sustain 132 cycles at a capacity of 492 mAh g^?1 (1000 mAh g_carbon ^?1) with low overpotentials under a high current density of 0.333 mA cm^?2. A high average energy density of 1350 Wh Kg^?1 is maintained over 110 cycles at this high current density. The excellent catalytic activity of 3D‐G‐MnO₂ makes it an attractive air electrode for high‐performance Li‐O₂ batteries.     

MnPO4‐Coated Li(Ni0.4Co0.2Mn0.4)O2 for Lithium(‐Ion) Batteries with Outstanding Cycling Stability and Enhanced Lithiation Kinetics

Herein, the successful synthesis of MnPO₄‐coated LiNi_0.4Co_0.2Mn_0.4O₂ (MP‐NCM) as a lithium battery cathode material is reported. The MnPO₄ coating acts as an ideal protective layer, physically preventing the contact between the NCM active material and the electrolyte and, thus, stabilizing the electrode/electrolyte interface and preventing detrimental side reactions. Additionally, the coating enhances the lithium de‐/intercalation kinetics in terms of the apparent lithium‐ion diffusion coefficient. As a result, MP‐NCM‐based electrodes reveal greatly enhanced C‐rate capability and cycling stability—even under exertive conditions like extended operational potential windows, elevated temperature, and higher active material mass loadings. This superior electrochemical behavior of MP‐NCM compared to as‐synthesized NCM is attributed to the superior stability of the electrode/electrolyte interface and structural integrity when applying a MnPO₄ coating. Employing an ionic liquid as an alternative, intrinsically safer electrolyte system allows for outstanding cycling stabilities in a lithium‐metal battery configuration with a capacity retention of well above 85% after 2000 cycles. Similarly, the implementation in a lithium‐ion cell including a graphite anode provides stable cycling for more than 2000 cycles and an energy and power density of, respectively, 376 Wh kg^?1 and 1841 W kg^?1 on the active material level.     

High Voltage LiNi0.5Mn0.3Co0.2O2/Graphite Cell Cycled at 4.6 V with a FEC/HFDEC‐Based Electrolyte

A high voltage LiNi_0.5Mn_0.3Co_0.2O₂/graphite cell with a fluorinated electrolyte formulation 1.0 m LiPF₆ fluoroethylene carbonate/bis(2,2,2‐trifluoroethyl) carbonate is reported and its electrochemical performance is evaluated at cell voltage of 4.6 V. Comparing with its nonfluorinated electrolyte counterpart, the reported fluorinated one shows much improved Coulombic efficiency and capacity retention when a higher cut‐off voltage (4.6 V) is applied. Scanning electron microscopy/energy dispersive X‐ray spectroscopy and X‐ray photoelectron spectroscopy data clearly demonstrate the superior oxidative stability of the new electrolyte. The structural stability of the bulk cathode materials cycled with different electrolytes is extensively studied by X‐ray absorption near edge structure and X‐ray diffraction.     

The Effect of Crystallinity on the Rapid Pseudocapacitive Response of Nb2O5

Capacitive energy storage offers several attractive properties compared to batteries, including higher power, faster charging, and a longer cycle life. A key limitation to this electrochemical energy‐storage approach is its low energy density and, for this reason, there is considerable interest in identifying pseudocapacitor materials where faradaic reactions are used to achieve greater charge storage. This paper reports on the electrochemical properties of Nb₂O₅ and establishes that crystalline phases of the material undergo fast faradaic reactions that lead to high specific capacitance in short charging times. In particular, the specific capacitance for the orthorhombic phase at infinite sweep rate reaches ≈400 F g^?1, which exceeds that of birnessite MnO₂ in nonaqueous electrolyte and is comparable to RuO₂ at the same extrapolated rate. The specific capacitances of the orthorhombic and pseudohexagonal phases are much greater than that of the amorphous phase, suggesting that the faradaic reactions which lead to additional capacitive energy storage are associated with Li⁺ insertion along preferred crystallographic pathways. The ability for Nb₂O₅ to store charge at high rates despite its wide bandgap and low electronic conductivity is very different from what is observed with other transition metal oxides.