Ability of polymerase eta and T7 DNA polymerase to bypass bulge structures

DNA misalignment occurs in homopolymer tracts during replication and can lead to frameshift mutations. Polymerase (pol) recognition of primer-templates containing bulge structures and the transmission of a bulge through a polymerase binding site or replication complex are important components of frameshift mutagenesis. In this report, we describe the interaction of the catalytic core of pol eta with primer-templates containing bulge structures by single round primer extension. We found that pol eta could stabilize a frayed primer terminus, which enhances its ability to extend primer-templates containing bulges. Based on methylphosphonate-DNA mapping, pol eta interacts with the single strand template but not appreciably with the template strand of the DNA stem greater than two nucleotides from the primer terminus. These latter characteristics, combined with the ability to stabilize a frayed primer terminus, may explain why primer-templates containing template bulges are extended so efficiently by pol eta. Although pol eta could accommodate large bulges and continue synthesis without obstruction, bulge structures in the template, but not in the primer, caused termination of the T7 DNA replication complex. Terminations occurred when the template bulge neared the helix-loop-helix domain of the polymerase thumb. Terminations were not observed, however, when bulge structures approached the site of interaction of the DNA with the extended thumb and thioredoxin. At low temperature, however, terminations did occur at this site.     

X-ray crystallographic observation of "in-line" and "adjacent" conformations in a bulged self-cleaving RNA/DNA hybrid

The RNA strand in an RNA/DNA duplex with unpaired ribonucleotides can undergo self-cleavage at bulge sites in the presence of a variety of divalent metal ions (Hüsken et al., Biochemistry, 1996, 35:16591-16600). Transesterification proceeds via an in-line mechanism, with the 2'-OH of the bulged nucleotide attacking the 3'-adjacent phosphate group. The site-specificity of the reaction is most likely a consequence of the greater local conformational freedom of the RNA backbone in the bulge region. A standard A-form backbone geometry prohibits formation of an in-line arrangement between 2'-oxygen and phosphate. However, the backbone in the region of an unpaired nucleotide appears to be conducive to an in-line approach. Therefore, the bulge-mediated phosphoryl transfer reaction represents one of the simplest RNA self-cleavage systems. Here we focus on the conformational features of the RNA that underlie site-specific cleavage. The structures of an RNA/DNA duplex with single ribo-adenosyl bulges were analyzed in two crystal forms, permitting observation of 10 individual conformations of the RNA bulge moiety. The bulge geometries cover a range of relative arrangements between the 2'-oxygen of the bulged nucleotide and the P-O5' bond (including adjacent and near in-line) and give a detailed picture of the conformational changes necessary to line up the 2'-OH nucleophile and scissile bond. Although metal ions are of crucial importance in the catalysis of analogous cleavage reactions by ribozymes, it is clear that local strain or conformational flexibility in the RNA also affect cleavage selectivity and rate (Soukup & Breaker, RNA, 1999, 5:1308-1325). The geometries of the RNA bulges frozen out in the crystals provide snapshots along the reaction pathway prior to the transition state of the phosphoryl transfer reaction.     

Kinking of RNA helices by bulged bases, and the structure of the human immunodeficiency virus transactivator response element.

We have used gel electrophoresis to show that the pyrimidine bulge of the HIV-1 TAR sequence causes a local bending of the helical axis. The TAR bulge caused a retardation in electrophoretic mobility in polyacrylamide gels. When this was placed adjacent to an additional bulged sequence in a linear RNA fragment, the mobility of the molecule varied sinusoidally with the spacing between the two bulges. Electrophoretic mobilities suggested that the TAR sequence context of the pyrimidine bulge causes a greater degree of axial kinking than in an equivalent randomly chosen sequence. Experiments in which an A5 bulge was progressively opposed by adenine bases inserted in the opposite strand showed that even a single opposed adenine markedly reduced electrophoretic mobility, i.e. axial bending, and two adenine bases reduced the mobility virtually to that of a normal duplex. We suggest that the pronounced kinking resulting from an unopposed bulge provides a particularly recognizable feature in RNA, and that this is the basis of the interaction between the HIV Tat protein and the TAR sequence.     

Thermodynamic parameters for an expanded nearest-neighbor model for the formation of RNA duplexes with single nucleotide bulges

Thirty-four RNA duplexes containing single nucleotide bulges were optically melted, and the thermodynamic parameters deltaH degrees, deltaS degrees, deltaG degrees (37), and T(M) for each sequence were determined. Data from this study were combined with data from previous thermodynamic data [Longfellow, C. E., Kierzek, R., and Turner, D. H. (1990) Biochemistry 29, 278-85] to develop a model that will more accurately predict the free energy of an RNA duplex containing a single nucleotide bulge. Differences between purine and pyrimidine bulges as well as differences between Group I duplexes, those in which the bulge is not identical to either neighboring nucleotide, and Group II duplexes, those in which the bulge is identical to at least one neighboring nucleotide, were considered. The length of the duplex, non-nearest-neighbor effects, and bulge location were also examined. A model was developed which divides sequences into two groups: those with pyrimidine bulges and those with purine bulges. The proposed model for pyrimidine bulges predicts deltaG degrees (37,bulge) = 3.9 kcal/mol + 0.10deltaG degrees (37,nn) + beta, while the model for purine bulges predicts deltaG degrees (37,bulge) = 3.3 kcal/mol - 0.30deltaG degrees (37,nn) + beta, where beta has a value of 0.0 and -0.8 kcal/mol for Group I and Group II sequences, respectively, and deltaG degrees (37,nn) is the nearest-neighbor free energy of the base pairs surrounding the bulge. The conformation of bulge loops present in rRNA was examined. Three distinct families of structures were identified. The bulge loop was either extrahelical, intercalated, or in a "side-step" conformation.     

Reduced dNTP interaction of human immunodeficiency virus type 1 reverse transcriptase promotes strand transfer

We have recently demonstrated that HIV-1 RT mutants characterized by low dNTP binding affinity display significantly reduced dNTP incorporation kinetics in comparison to wild-type RT. This defect is particularly emphasized at low dNTP concentrations where WT RT remains capable of efficient synthesis. Kinetic interference in DNA synthesis can induce RT pausing and slow down the synthesis rate. RT stalling and slow synthesis rate can enhance RNA template cleavage by RT-RNase H, facilitating transfer of the primer to a homologous template. We therefore hypothesized that reduced dNTP binding RT mutants can promote template switching during minus strand synthesis more efficiently than WT HIV-1 RT at low dNTP concentrations. To test this hypothesis, we employed two dNTP binding HIV-1 RT mutants, Q151N and V148I. Indeed, as the dNTP concentration was decreased, the template switching frequency progressively increased for both WT and mutant RTs. However, as predicted, the RT mutants promoted more transfers compared with WT RT. The WT and mutant RTs were similar in their intrinsic RNase H activity, supporting that the elevated template switching efficiency of the mutants was not the result of the mutations enhancing RNase H activity. Rather, kinetic interference leading to stalled DNA synthesis likely enhanced transfers. These results suggest that the RT-dNTP substrate interaction mechanistically influences strand transfer and recombination of HIV-1 RT.     

Crystal structure of an RNA duplex r(gugucgcac)(2) with uridine bulges.

The crystal structure of a nonamer RNA duplex with a uridine bulge in each strand, r(gugucgcac)(2), was determined at 1.4 A resolution. The structure was solved by multiple anomalous diffraction phasing method using a three-wavelength data set collected at the Advanced Protein Source and refined to a final R(work)/R(free) of 21.2 %/23.4 % with 33,271 independent reflections (Friedel pairs unmerged). The RNA duplex crystallized in the tetragonal space group P4(1)22 with two independent molecules in the asymmetric unit. The unit cell dimensions are a=b=47.18 A and c=80.04 A. The helical region of the nonamer adopts the A-form conformation. The uridine bulges assume similar conformations, with uracils flipping out and protruding into the minor groove. The presence of the bulge induces very large twist angles (approximately +50 degrees) between the base-pairs flanking the bulges while causing profound kinks in the helix axis at the bulges. This severe twist and the large kink in turn produces a very narrow major groove at the middle of the molecule. The ribose sugars of the guanosines before the bulges adopt the C2'-endo conformation while the rest, including the bulges, are in the C3'-endo conformation. The intrastrand phosphate-phosphate (P-P) distance of the phosphate groups flanking the bulges (approximately 4.4 A) are significantly shorter than the average P-P distance in the duplex (6.0 A). This short distance between the two phosphate groups brings the non-bridging oxygen atoms close to each other where a calcium ion is bound to each strand. The calcium ions in molecule 1 are well defined while the calcium ions in molecule 2 are disordered.     

Investigation of potential RNA bulge stabilizing elements

As a part of our interest in recognition and cleavage of RNA we carried out thermal melting studies with the aim of screening a number of simple oligonucleotide modifications for their potential as modifying elements for RNA bulge stabilizing oligonucleotides. A specific model system from our studies on oligonucleotide-based artificial nuclease (OBAN) systems was chosen and the bulge size was varied from one to five nucleotides. Introduction of single 2'-modified nucleoside moieties (2'-O-methyl, 2'-deoxy and 2'-deoxy-2'-amino) with different conformational preferences adjacent to the bulge revealed that a higher preference for the north conformers gave more stable bulges across the whole range of bulge sizes. Changing a bulge closing a G-U wobble base pair to a G-C pair resulted in the interesting observation that, although the fully complementary complex and small bulges were highly stabilized, there was little difference in the stability of the larger bulges. The wobble base pair even gave a slight stabilization of the 5 nt bulge system. Introduction of a uridine C-5 linker with a single ammonium group was clearly bulge stabilizing (DeltaT(m) + 4.6 to + 5.4 degrees C for the three most stabilized bulges), although with limited selectivity for different bulge sizes since the fully complementary duplex was also stabilized. Introduction of a naphthoyl group on a 2'-aminolinker mostly gave a destabilizing effect, while introduction of a 5-aminoneocuproine moiety on the same linker resulted in stabilization of all bulges, in particular those with two or four unpaired nucleotides (DeltaT(m) + 3.6 and + 2.9 degrees C respectively). The aromatic groups destabilize the fully complementary duplex, resulting in higher selectivity towards stabilization of bulges. A combination of the studied partial element should be suitable for future designs of modified oligonucleotides that, apart from standard base pairing, can also provide additional non-Watson-Crick recognition of RNA.     

A structural determinant required for RNA editing

RNA editing by adenosine deaminases acting on RNAs (ADARs) can be both specific and non-specific, depending on the substrate. Specific editing of particular adenosines may depend on the overall sequence and structural context. However, the detailed mechanisms underlying these preferences are not fully understood. Here, we show that duplex structures mimicking an editing site in the Gabra3 pre-mRNA unexpectedly fail to support RNA editing at the Gabra3 I/M site, although phylogenetic analysis suggest an evolutionarily conserved duplex structure essential for efficient RNA editing. These unusual results led us to revisit the structural requirement for this editing by mutagenesis analysis. In vivo nuclear injection experiments of mutated editing substrates demonstrate that a non-conserved structure is a determinant for editing. This structure contains bulges either on the same or the strand opposing the edited adenosine. The position of these bulges and the distance to the edited base regulate editing. Moreover, elevated folding temperature can lead to a switch in RNA editing suggesting an RNA structural change. Our results indicate the importance of RNA tertiary structure in determining RNA editing.