Conformation and interactions of uteroglobin fragments 4–14 and 49–65 in aqueous solution containing surfactant micelles

The conformation of two fragments of rabbit uteroglobin is described. The peptides are PRFAHVIENLL and PQTTRENIMKLTEKIVK, corresponding to helices I and IV in the crystal structure. CD shows that both peptides interact with sodium dodecyl sulfate (SDS) micelles and change their conformation to an α-helix. The helical content estimated from the CD band at 222 nm is about 40% in each peptide. Surface tension measurements show that both peptides lower the critical micellar concentration (cmc) of SDS, with a more dramatic effect in the case of helix I. This peptide by itself acts as a surfactant, and is able to interact with SDS even below the observed cmc, forming β aggregates. Proton magnetic resonance (¹H-nmr) suggests that flexible helices are present. The longest helical stretches compatible with ¹H-nmr data extend from Phe⁶ to Leu¹⁴ for helix I and from Arg⁵³ to Ile⁶³ for helix IV. © 1993 John Wiley & Sons, Inc.     

Cunning Simplicity of a Stoichiometry Driven Protein Folding Thesis

Abstract

Mastoparan B (MP-B) is an antimicrobial cationic tetradecapeptide amide isolated from the venom of the hornet Vespa basalis. NMR spectroscopy was used to study the membrane associated structures of MP-B in various model membrane systems such as 120 mM DPC micelles, 200 mM SDS micelles, and 3%(w/v) DMPC/DHPC (1:2) bicelles. In all systems, MP-B has an amphiphilic α-helical structure from Lys² to Leu¹⁴. NOESY experiments performed on MP-B in nondeuterated SDS micelles show that protons in the indole ring of Trp⁹ are in close contact with methylene protons of SDS micelles. T₁ relaxation data and NOE data revealed that the bound form of MP-B may be dominant in SDS micelles. The interactions between MP-B and zwitterionic DPC micelles were much weaker than those between MP-B and anionic SDS micelles. By substitution of Trp⁹ with Ala⁹, the pore-forming activity of MP-B was decreased dramatically. All of these results imply that strong electrostatic interactions between the positively charged Lys residues in MP-B and the anionic phospholipid head groups must be the primary factor for MP-B binding to the cell membrane. Then, insertion of the indole ring of Trp⁹ into the membrane, as well as the amphiphilic α-helical structures of MP-B may allow MP-B to span the lipid bilayer through the C-terminal portion. These structural features are crucial for the potent antibiotic activities of MP-B.     

Hydrophobic Effects on Antibacterial and Channel-forming Properties of Cecropin A–Melittin Hybrids

The design of cecropin–melittin hybrid analogues is of interest due to the similarities in the structure of the antimicrobial peptides cecropin and melittin but differences in their lytic properties. We suspected that a hydrophobic residue in position 2 of milittin (Ile⁸ in the hybrid) plays an important role in the activity of the 15-residue hybrid, KWKLFKKIGAVLKVL-NH₂, [CA(1–7)M(2–9)NH₂] and have now examined its role in the analogue toward five test bacteria. Deletion of Ile⁸ reduced activity, and it was not restored by lengthening to 15 residues by addition of another threonine at the C-terminus. Replacement of Ile⁸ by a hydrophobic leucine maintained good activity and Ala⁸ was equally active for four organisms, although less active against Staphylococcus aureus. Replacement by the hydrophilic Ser⁸ strongly reduced potency against all five organisms. Deletion of Leu¹⁵ decreased activity, but addition of Thr¹⁶ maintained good activity. The presence of hydrophobic residues appears to have a significant effect on the process of antibacterial activity. These peptide analogues showed voltage-dependent conductance changes and are capable of forming ion-pores in planar lipid bilayers. The antibacterial action of the peptides is thought to be first an ionic interaction with the anionic phosphate groups of the membrane followed by interaction with the hydrocarbon core of the membrane and subsequent reorientation into amphipathic α-helical peptides that form pores (ion-channels), which span the membrane. The analogue also showed an increase in α-helicity with an increase in hexafluoro 2-propanol concentration.     

Circular Dichroism Studies of the Interaction of Tat Analogues Substituted in the Arg52 Position with TAR RNA HIV-1

The Tat wild-type fragment of sequence Arg⁴⁹-Lys-Lys-Arg⁵²-Arg-Gln-Arg-Arg-Arg⁵⁷-NH₂ (labelled as Tat1) and three analogues of this fragment with the substitution Arg⁵² → D-Arg⁵² (labelled as Tat2) or L-citrulline (Cit) (labelled as Tat3) or L-ornithine (Orn) (labelled as Tat4) were synthesized to study Tat-TAR RNA HIV-1 (27-nucleotide fragment of sequence 5′-AGAUCUGAGCCUGGAGCUCUCU-3′) interactions by circular dichroism. α-helical structure was the most readily adopted by the Tat3 analogue with Arg⁵² → Cit substitution. All the peptides investigated caused conformational changes in the TAR structure. The most dramatic changes were observed for the Tat2-TAR complex.     

Circular Dichroism Studies of the Interaction of Tat Analogues Substituted in the Arg52 Position with TAR RNA HIV-1

The Tat wild-type fragment of sequence Arg⁴⁹-Lys-Lys-Arg⁵²-Arg-Gln-Arg-Arg-Arg⁵⁷-NH₂ (labelled as Tat1) and three analogues of this fragment with the substitution Arg⁵² D-Arg⁵² (labelled as Tat2) or L-citrulline (Cit) (labelled as Tat3) or L-ornithine (Orn) (labelled as Tat4) were synthesized to study Tat-TAR RNA HIV-1 (27-nucleotide fragment of sequence 5-AGAUCUGAGCCUGGAGCUCUCU-3) interactions by circular dichroism. -helical structure was the most readily adopted by the Tat3 analogue with Arg⁵² Cit substitution. All the peptides investigated caused conformational changes in the TAR structure. The most dramatic changes were observed for the Tat2-TAR complex.     

Aggregation and conformational transition in aqueous solution of a bombolitin III analogue containing a photoreactive side-chain group

The peptide toxin bombolitin III [B(III)], originally isolated from bumblebee venom, has been shown to undergo a concentration-dependent conformational change from a random structure to an α-helix induced by aggregation. The aggregation process and the consequent folding results from a delicate balance of electrostatic and hydrophobic interactions. The conformational change is strongly dependent on pH and salt concentration. In order to gain insight on the structure of the aggregates, and in particular, on the aggregation number and relative orientation of helices in the molecular complexes, the following analogue of bombolitin III was designed and synthesized: Ile-Lys-Bpa-Met-Asp-Ile-Leu-Ala-Lys-Leu-Gly-Lys-Val-Leu-Ala-His-Val-NH₂ Bpa³-B(III) where Bpa is benzoylphenylalanine. Bpa³-B(III) aggregates were investigated by CD and nmr techniques. The observed nuclear Overhauser effect pattern accounts for an antiparallel orientation of two distinct helices. The Bpa side chain allows for the photoinduced cross reaction with any aliphatic proton in spatial proximity. After irradiation, the reaction mixture was analyzed by high performance liquid chromatography and electrospray mass spectrometry. The results confirmed the presence of dimeric and trimeric complexes of bombolitin III formed upon interhelix cross-linking. © 1997 John Wiley & Sons, Inc. Biopoly 42: 147–156, 1997     

The Structure of the C-Terminal Domain of the Pro-Apoptotic Protein Bak and Its Interaction with Model Membranes

Bak is a pro-apoptotic protein widely distributed in different cell types that is associated with the mitochondrial outer membrane, apparently through a C-terminal hydrophobic domain. We used infrared spectroscopy to study the secondary structure of a synthetic peptide (⁺₃HN-¹⁸⁸ILNVLVVLGVVLLGQFVVRRFFKS²¹¹-COO^-) with the same sequence as the C-terminal domain of Bak. The spectrum of this peptide in D₂O buffer shows an amide I′ band with a maximum at 1636 cm⁻¹, which clearly indicates the predominance of an extended β-structure in aqueous solvent. However, the peptide incorporated in multilamellar dimyristoylphosphatidylcholine (DMPC) membranes shows a different amide I′ band spectrum, with a maximum at 1658 cm⁻¹, indicating a predominantly α-helical structure induced by its interaction with the membrane. It was observed that through differential scanning calorimetry the transition of the phospholipid model membrane was broadened in the presence of the peptide. Fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) in fluid DMPC vesicles showed that increasing concentrations of the peptide produced increased polarization values, which is compatible with the peptide being inserted into the membrane. High concentrations of the peptide considerably broaden the phase transition of DMPC multilamellar vesicles, and DPH polarization increased, especially at temperatures above the T_c transition temperature of the pure phospholipid. The addition of peptide destabilized unilamellar vesicles and released encapsulated carboxyfluorescein. These results indicate that this domain is able to insert itself into membranes, where it adopts an α-helical structure and considerably perturbs the physical properties of the membrane.     

The symmetries of filamentous phage particles

The helical symmetries of two classes of filamentous bacteriophage particles are distinctly different. The symmetry of the class I particles is²C₅S_~2.0 (a 5-fold rotation axis combined with an approximately 2-fold screw axis). The symmetry of the class II particles is C₁S_5.4 (a one-start helix with 27 subunits equally spaced along five turns). The same basic α-helical interlocking arrangement of the largely α-helical coat protein subunits can be accommodated by the symmetry of the two classes of phage particles. The conservation of this structural pattern reflects intrinsic packing properties of α-helices. The difference between the symmetries of the class I and class II particles suggests that different assembly processes may have evolved to form these structures with very similar protein packing architectures.     

Manipulation of peptide conformations by fine-tuning of the environment and/or the primary sequence

The widely observed phenomenon that peptides are capable of adopting multiple conformations in different environments suggests that secondary structure formation in a peptide segment is a process involving not only the peptide itself hut also the surrounding solvent media. The influence of the primary sequence and the molecular environment on peptide conformations are now investigated using synthetic peptides of amino acid sequence H₂N-(Ser-Lys)₂-Ala-X-Gly-Ala-X-Gly-Trp-Ala-X-Gly-(Lys-Ser)₃-OH, where X = Ile or Val. These two peptides, namely 3I (X = Ile) and 3V (X = Val), are found to lack defined secondary structure in aqueous buffer. However, discrete conformational states, e.g., α-helices and β-sheets, are readily generated and interconverted for both peptides when the buffer is modulated with the addition of methanol, sodium dodecyl sulfate (SDS) micelles, or phospholipid vesicles. The role of the primary sequence in affecting peptide conformations is manifested in that peptides 3I and 3V, which differ respectively in their content of β-branched Ile or Val residues, differ in their secondary structures at monomeric concentrations in 2 mM SDS and in mixed lipid vesicles of phosphatidic acid and phosphatidylcholine. The overall results suggest that peptide segments can be conformationally flexible entities poised to react to minor modulations in cither the molecular environment or the primary sequence, a circumstance that may he relevant to protein functioning and folding. © 1995 John Wiley & Sons, Inc.     

Structural characterization of the osmosensor ProP

ProP, an osmoprotectant symporter from the major facilitator superfamily was expressed, purified and reconstituted into proteoliposomes that are amenable to structural characterization using infrared spectroscopy. Infrared spectra recorded in both ¹H₂O and ²H₂O buffers reveal amide I band shapes that are characteristic of a predominantly α-helical protein, and that are similar to those recorded from the well-characterized homolog, lactose permease (LacY). Curve-fit analysis shows that ProP and LacY both exhibit a high α-helical content. Both proteins undergo extensive peptide hydrogen-deuterium exchange after exposure to ²H₂O, but are surprisingly thermally stable with denaturation temperatures greater than 60 °C. 25-30% of the peptide hydrogens in both ProP and LacY are resistant to exchange after 72 h in ²H₂O at 4 °C. Surprisingly, these exchange resistant peptide hydrogens exchange completely for deuterium at temperatures below those that lead to denaturation. Our results show that ProP adopts a highly α-helical fold similar to that of LacY, and that both transmembrane folds exhibit unusually high temperature-sensitive solvent accessibility. The results provide direct evidence that ProP adopts a structure consistent with other major facilitator superfamily members.     

Modified Cysteine-Deleted Tachyplesin (CDT) Analogs as Linear Antimicrobial Peptides: Influence of Chain Length,Positive Charge,and Hydrophobicity on Antimicrobial and Hemolytic Activity

Due to increasing resistance of bacteria to traditional antibiotics, antimicrobial peptides are being investigated as a promising alternative. Tachyplesin, an antimicrobial peptide isolated from horseshoe crab, inhibits the growth of many different types of bacteria with its ability to permeabilize the cell membrane. Starting with a previously reported linear tachyplesin analog lacking cysteine (cysteine-deleted tachyplesin, CDT, KWFRVYRGIYRRR-CONH₂), this study examines the systematic deletion of the C-terminal arginines and the N-terminal lysine, addition of positively charged N-and C-terminal residues, replacement of arginine with similarly-charged lysine, and replacement of hydrophobic residues with aliphatic, aromatic, fluoro-substituted aromatic, and bicyclic amino acids to examine effects on activity. The 16 modified CDT analogs were tested for their ability to disrupt model liposomes, and minimum inhibitory concentrations were determined for gram-positive and gram-negative bacterial strains. Hemolytic activity also was assessed. Overall, results indicate that elimination of two C-terminal arginine residues results in a peptide ([des-Arg^12,13]CDT) with preserved antimicrobial activity but a reduction in hemolysis, a selectivity desirable for a therapeutic agent. Additional deletion was not tolerated, nor was addition of residues at the termini. Analysis of the 16 analogs also reveals the importance of hydrophobicity, not necessarily aromaticity, as an analog with hydrophobic isoleucine residues placed throughout the sequence ([Ile^2,3,6,10]CDT) displayed comparable antimicrobial activity to CDT with lower hemolysis, representing a promising antimicrobial peptide with lowered toxicity.     

Synthesis,biophysical and functional studies of two BP100 analogues modified by a hydrophobic chain and a cyclic peptide

Antimicrobial peptides (AMPs) work as a primary defense against pathogenic microorganisms. BP100, (KKLFKKILKYL-NH₂), a rationally designed short, highly cationic AMP, acts against many bacteria, displaying low toxicity to eukaryotic cells. Previously we found that its mechanism of action depends on membrane surface charge and on peptide-to-lipid ratio. Here we present the synthesis of two BP100 analogs: BP100‑alanyl‑hexadecyl‑1‑amine (BP100-Ala-NH-C₁₆H₃₃) and cyclo(1‑4)‑d‑Cys¹, Ile², Leu³, Cys⁴-BP100 (Cyclo(1‑4)‑cILC-BP100). We examined their binding to large unilamellar vesicles (LUV), conformational and functional properties, and compared with those of BP100. The analogs bound to membranes with higher affinity and a lesser dependence on electrostatic forces than BP100. In the presence of LUV, BP100 and BP100-Ala-NH-C₁₆H₃₃ acquired α-helical conformation, while Cyclo(1‑4)‑cILC-BP100) was partly α-helical and partly β-turn. Taking in conjunction: 1. particle sizes and zeta potential, 2. effects on lipid flip-flop, 3. leakage of LUVs internal contents, and 4. optical microscopy of giant unilamellar vesicles, we concluded that at high concentrations, all three peptides acted by a carpet mechanism, while at low concentrations the peptides acted by disorganizing the lipid bilayer, probably causing membrane thinning. The higher activity and lesser membrane surface charge dependence of the analogs was probably due to their greater hydrophobicity. The MIC values of both analogs towards Gram-positive and Gram-negative bacteria were similar to those of BP100 but both analogues were more hemolytic. Confocal microscopy showed Gram-positive B. subtilis killing with concomitant extensive membrane damage suggestive of lipid clustering, or peptide-lipid aggregation. These results were in agreement with those found in model membranes.     

Computational and Experimental Investigation of the Antimicrobial Peptide Cecropin XJ and its Ligands as the Impact Factors of Antibacterial Activity

Cecropin XJ, as a heat stable antimicrobial peptide (AMP), displayed broad bacteriostatic activities, effectively inhibited proliferation of cancer cells and induced cell apoptosis in vitro. However, it exhibited little hemolytic activity and very low cytotoxicity to erythrocytes and normal cells. Although exerts multiple remarkable bioactivities, the refined molecular conformation of native Cecropin XJ remains unsolved. The aim of the present study is to comprehensively investigate the physicochemical characteristics and structure-function relationship of this antimicrobial peptide by using a series of bioinformatics and experimental approaches. In this study, we revealed that the mature Cecropin XJ consists of 41 amino acids, containing two α-helical structures from Lys⁷ to Lys²⁵ and from Ala²⁹ to Ile³⁹. The phylogenetic tree indicated that Cecropin XJ belongs to the Class I AMPs of cecropin family. Hydrophobic analysis showed Cecropin XJ is a typical amphiphilic molecule. The surface of Cecropin XJ was found to have a much wide range of electrostatic potential from ?83.243 to +83.243. The amphipathicity and surface potential of Cecropin XJ partially supported the AMP pore-forming hypothesis. Scanning electron microscopy experimentally confirmed the damages of Cecropin XJ to microbial membrane. Four predicted docking sites respectively for magnesium ion (Mg²⁺), adenosine diphosphate (ADP), bacteriopheophytin (BPH), and guanosine triphosphate (GTP) were found on the surface of Cecropin XJ. Thereinto, Mg²⁺ was experimentally proved to suppress the antibacterial activity of Cecropin XJ; both GTP and ADP enhanced the bactericidal activities to varying degrees. The present study provides a foundation for further investigation of molecular evolution, structural modification, and functional mechanisms of Cecropin XJ.     

Interactions of a synthetic Leu–Lys-rich antimicrobial peptide with phospholipid bilayers

The interaction of the synthetic antimicrobial peptide P5 (KWKKLLKKPLLKKLLKKL-NH₂) with model phospholipid membranes was studied using solid-state NMR and circular dichroism (CD) spectroscopy. P5 peptide had little secondary structure in buffer, but addition of large unilamellar vesicles (LUV) composed of dimyristoylphosphatidylcholine (DMPC) increased the β-sheet content to ~20%. Addition of negatively charged LUV, DMPC–dimyristoylphosphatidylglycerol (DMPG) 2:1, led to a substantial (~40%) increase of the α-helical conformation. The peptide structure did not change significantly above and below the phospholipid phase transition temperature. P5 peptide interacted differently with DMPC bilayers with deuterated acyl chains (d₅₄-DMPC) and mixed d₅₄-DMPC–DMPG bilayers, used to mimic eukaryotic and prokaryotic membranes, respectively. In DMPC vesicles, P5 peptide had no significant interaction apart from slightly perturbing the upper region of the lipid acyl chain with minimum effect at the terminal methyl groups. By contrast, in the DMPC–DMPG vesicles the peptide increased disorder throughout the entire acyl chain of DMPC in the mixed bilayer. P5 promoted disordering of the headgroup of neutral membranes, observed by ³¹P NMR. However, no perturbations in the T ₁ relaxation nor the T ₂- values were observed at 30°C, although a slight change in the dynamics of the headgroup at 20°C was noticeable compared with peptide-free vesicles. However, the P5 peptide caused similar perturbations of the headgroup of negatively charged vesicles at both temperatures. These data correlate with the non-haemolytic activity of the P5 peptide against red blood cells (neutral membranes) while inhibiting bacterial growth (negatively charged membranes).     

Conformation of poly(L-homoarginine)

Poly(L -arginine) assumes the α-helix in the presence of the tetrahedral-type anions or some polyanions by forming the “ringed-structure bridge” between guanidinium groups and anions which is stabilized by a pair of hydrogen bonds and electrostatic interaction [Ichimura, S., Mita, K. & Zama, M. (1978) Biopolymers 17 , 2769–2782; Mita, K., Ichimura, S. & Zama, M. (1978) Biopolymers 17 , 2783–2798]. This paper describes the parallel CD studies on the conformational effects on poly (L -homoarginine) of various mono-, di-, polyvalent anions and some polyanions, as well as alcohol and sodium dodecylsulfate. The random coil to α-helix transition of poly(L -homoarginine) occurred only in NaClO₄ solution or in the presence of high content of ethanol or methanol. The divalent and polyvalent anions of the tetrahedral type (SO, HPO, and P₂O), which are strong α-helix-forming agents for poly(L -arginine), failed to induce the α-helical conformation of poly(L -homoarginine). By complexing with poly(L -glutamic acid) or with polyacrylate, which is also a strong α-helix-forming agent for poly(L -arginine), poly(L -homoarginine) only partially formed the α-helical conformation. Monovalent anions (OH^?, Cl^?, F^?, and H₂PO) did not change poly(L -homoarginine) to the α-helix, and in the range of pH 2–11, the polypeptide remained in an unordered conformation. In sodium dodecylsulfate, poly(L -homoarginine) exhibited the remarkably enlarged CD spectrum of an extended conformation, while poly(L -arginine) forms the α-helix by interacting with the agent. Thus poly(L -homoarginine), compared with poly(L -arginine), has a much lower ability to form the α-helical conformation by interacting with anions. The stronger hydrophobicity of homoarginine residue in comparison with the arginine residue would provide unfavorable conditions to maintain the α-helical conformation.     

Structure and localization of an essential transmembrane segment of the proton translocation channel of yeast H-V-ATPase

Vacuolar (H⁺)-ATPase (V-ATPase) is a proton pump present in several compartments of eukaryotic cells to regulate physiological processes. From biochemical studies it is known that the interaction between arginine 735 present in the seventh transmembrane (TM7) segment from subunit a and specific glutamic acid residues in the subunit c assembly plays an essential role in proton translocation. To provide more detailed structural information about this protein domain, a peptide resembling TM7 (denoted peptide MTM7) from Saccharomyces cerevisiae (yeast) V-ATPase was synthesized and dissolved in two membrane-mimicking solvents: DMSO and SDS. For the first time the secondary structure of the putative TM7 segment from subunit a is obtained by the combined use of CD and NMR spectroscopy. SDS micelles reveal an α-helical conformation for peptide MTM7 and in DMSO three α-helical regions are identified by 2D ¹H-NMR. Based on these conformational findings a new structural model is proposed for the putative TM7 in its natural environment. It is composed of 32 amino acid residues that span the membrane in an α-helical conformation. It starts at the cytoplasmic side at residue T719 and ends at the luminal side at residue W751. Both the luminal and cytoplasmatic regions of TM7 are stabilized by the neighboring hydrophobic transmembrane segments of subunit a and the subunit c assembly from V-ATPase.     

Effects of residue 5-point mutation and N-terminus hydrophobic residues on temporin-SHc physicochemical and biological properties

Temporin-SHc (FLSHIAGFLSNLF_amide) first isolated from skin extraction of the Tunisian frog Pelophylax saharica, which shows potent antimicrobial activity against Gram-positive bacteria and is highly active against yeasts and fungi without hemolytic activity at antimicrobial concentrations. The peptide adopts well-defined α-helical conformation when bound to SDS micelles. In this study, we explored the effects of residue at position 5 and the N-terminus hydrophobic character on the hydrophilic/polar face of temp-SHc, on its biological activities (antimicrobial and hemolytic) and biophysical properties (hydrophobicity, amphipathicity and helicity). Antibacterial and hemolytic properties of temporin-SHc derivatives depend strongly on physicochemical properties. Therefore, slight decreasing amphipathicity together with hydrophobicity and helicity by the substitution Ile⁵ → Leu decreased antimicrobial potency approximately twofold without changing of hemolytic activity. It is noteworthy that a conservative amino acid substitution decreases the antimicrobial activity, underlining the differences between Leu/Ile side chains insertion into the lipid bilayer. While the modification of N-terminal hydrophobic character by four residue inversion decreased amphipathicity (twofold) of (4-1)L₅temp-SHc and resulted in an increase in antibacterial activity against E. coli, E. faecalis and C. parapsilosis of at least fourfold, its therapeutic potential is limited by its drastic increase of hemolysis (LC₅₀ = 2 μM). We found that the percentage of helicity of temp-SHc analog is directly correlated to its hemolytic activity. Last, the hydrophobic N-terminal character is an important determinant of antimicrobial activity.     

Solution structure of the first and second transmembrane segments of the mitochondrial oxoglutarate carrier

The structures of the first and the second transmembrane segment of the bovine mitochondrial oxoglutarate carrier (OGC) were studied by circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopies. Peptides 21–46 and 78–108 of its primary sequence were synthesized and structurally characterized in membrane-mimetic environments. CD data showed that at high concentrations of TFE (>50%) and SDS (>2%) both peptides assume α-helical structures, whereas in more hydrophilic environments only peptide 78–108 has a helical structure. ¹H-NMR spectra of the two peptides in TFE/water and SDS were fully assigned, and the secondary structures of the peptides were obtained from nuclear Overhauser effects, ³J_αH-NH coupling constants and αH chemical shifts. The three-dimensional solution structures of the peptides in TFE/water were generated by distance geometry calculations. A well-defined α-helix was found in the region K24-V39 of peptide 21–46 and in the region A86–F106 of peptide 78–108. We cannot exclude that in intact OGC the extension of these helices is longer. The helix of peptide 21–46 is essentially hydrophobic, whereas that of peptide 78–108 is predominantly hydrophilic.     

Class I MHC allochimeric presentation of composite immunogenic and self epitopes induces tolerance to genetically diverse rat strains

Functional topography of rat class I major histocompatibility complex (MHC) molecule was studied. The α₁-helical sequences that are shared by class I RT1.A^l and RT1.A^u were substituted in the RT1.A^a molecule to produce the composite -RT1.A^a MHC class I allochimeric molecule. Dominant immunogenic epitopes that induce accelerated rejection were identified within the hypervariable regions of the α₁ domain of RT1.A^a, RT1.A^l, and RT1.A^u. Peri-transplant portal venous delivery of MHC class I allochimeric proteins, that included composite α₁ helical immunodominant epitopes of RT1.A^u and RT1.A^l, induced donor-specific tolerance to RT1^u (Wistar Furth, WF) and RT1^l Lewis, LEW) disparate cardiac allografts in ACI (RT1^a) hosts. Allochimeric generated tolerance was characterized by absence of T cell deletion or anergy. Donor specific IgM allo-Abs was not detected, while IgG alloresponse was markedly attenuated in sera of tolerant hosts. Further, long-term allografts in allochimeric-conditioned hosts exhibited moderate B cell infiltration when compared to rejecting controls. Analysis of intragraft cytokines revealed selective upregulation of IL-10 and marked inhibition of IL-2, IFN-γ, and IL-4. Our findings indicate the emergence of a peripherally induced tolerant state, afforded by the novel approach of soluble class I allochimeric conditioning that presents donor immunogenic epitopes in the context of recipient class I determinants.     

Insights into substrate binding at FeMo-cofactor in nitrogenase from the structure of an α-70 MoFe protein variant

The X-ray crystal structure is presented for a nitrogenase MoFe protein where the alpha subunit residue at position 70 (α-70^Val) has been substituted by the amino acid isoleucine (α-70^Ile). Substitution of α-70^Val by α-70^Ile results in a MoFe protein that is hampered in its ability to reduce a range of substrates including acetylene and N₂, yet retains normal proton reduction activity. The 2.3 Å structure of the α-70^Ile MoFe protein is compared to the α-70^Val wild-type MoFe protein, revealing that the δ methyl group of α-70^Val is positioned over Fe6 within the active site FeMo-cofactor. This work provides strong crystallographic support for the previously proposed model that substrates bind and are reduced at a single 4Fe-4S face of the FeMo-cofactor and that when α-70^Val is substituted by α-70^Ile access of substrates to Fe6 of this face is effectively blocked. Furthermore the detailed examination of the structure provides the basis for understanding the ability to trap and characterize hydrides in the variant, contributing significantly to our understanding of substrate access and substrate reduction at the FeMo-cofactor active site of nitrogenase.