Biosynthesis of polyhydroxyalkanoate copolymers from methanol by Methylobacterium extorquens AM1 and the engineered strains under cobalt-deficient conditions

Methylobacterium extorquens AM1 has been shown to accumulate polyhydroxyalkanoate (PHA) composed solely of (R)-3-hydroxybutyrate (3HB) during methylotrophic growth. The present study demonstrated that the wild-type strain AM1 grown under Co²⁺-deficient conditions accumulated copolyesters of 3HB and a C₅-monomer, (R)-3-hydroxyvalerate (3HV), using methanol as the sole carbon source. The 3HV unit was supposed to be derived from propionyl-CoA, synthesized via the ethylmalonyl-CoA pathway impaired by Co²⁺ limitation. This assumption was strongly supported by the dominant incorporation of the 3HV unit into PHA when a strain lacking propionyl-CoA carboxylase was incubated with methanol. Further genetic engineering of M. extorquens AM1 was employed for the methylotrophic synthesis of PHA copolymers. A recombinant strain of M. extorquens AM1C_Ac in which the original PHA synthase gene phaC _Me had been replaced by phaC _Ac , encoding an enzyme with broad substrate specificity from Aeromonas caviae, produced a PHA terpolymer composed of 3HB, 3HV, and a C₆-monomer, (R)-3-hydroxyhexanoate, from methanol. The cellular content and molecular weight of the PHA accumulated in the strain AM1C_Ac were higher than those of PHA in the wild-type strain. The triple deletion of three PHA depolymerase genes in M. extorquens AM1C_Ac showed no significant effects on growth and PHA biosynthesis properties. Overexpression of the genes encoding β-ketothiolase and NADPH-acetoacetyl-CoA reductase increased the cellular PHA content and 3HV composition in PHA, although the cell growth on methanol was decreased. This study opens up the possibility of producing practical PHA copolymers with methylotrophic bacteria using methanol as a feedstock.     

Thioesterases for ethylmalonyl–CoA pathway derived dicarboxylic acid production in <Emphasis Type="Italic">Methylobacterium extorquens</Emphasis> AM1

The ethylmalonyl–coenzyme A pathway (EMCP) is a recently discovered pathway present in diverse α-proteobacteria such as the well studied methylotroph Methylobacterium extorquens AM1. Its glyoxylate regeneration function is obligatory during growth on C1 carbon sources like methanol. The EMCP contains special CoA esters, of which dicarboxylic acid derivatives are of high interest as building blocks for chemical industry. The possible production of dicarboxylic acids out of the alternative, non-food competing C-source methanol could lead to sustainable and economic processes. In this work we present a testing of functional thioesterases being active towards the EMCP CoA esters including in vitro enzymatic assays and in vivo acid production. Five thioesterases including TesB from Escherichia coli and M. extorquens, YciA from E. coli, Bch from Bacillus subtilis and Acot4 from Mus musculus showed activity towards EMCP CoA esters in vitro at which YciA was most active. Expressing yciA in M. extorquens AM1 led to release of 70 mg/l mesaconic and 60 mg/l methylsuccinic acid into culture supernatant during exponential growth phase. Our data demonstrates the biotechnological applicability of the thioesterase YciA and the possibility of EMCP dicarboxylic acid production from methanol using M. extorquens AM1.     

Co-Consumption of Methanol and Succinate by Methylobacterium extorquens AM1

Methylobacterium extorquens AM1 is a facultative methylotrophic Alphaproteobacterium and has been subject to intense study under pure methylotrophic as well as pure heterotrophic growth conditions in the past. Here, we investigated the metabolism of M. extorquens AM1 under mixed substrate conditions, i.e., in the presence of methanol plus succinate. We found that both substrates were co-consumed, and the carbon conversion was two-thirds from succinate and one-third from methanol relative to mol carbon. ¹³C-methanol labeling and liquid chromatography mass spectrometry analyses revealed the different fates of the carbon from the two substrates. Methanol was primarily oxidized to CO₂ for energy generation. However, a portion of the methanol entered biosynthetic reactions via reactions specific to the one-carbon carrier tetrahydrofolate. In contrast, succinate was primarily used to provide precursor metabolites for bulk biomass production. This work opens new perspectives on the role of methylotrophy when substrates are simultaneously available, a situation prevailing under environmental conditions.     

Engineering cofactor and transport mechanisms in Saccharomyces cerevisiae for enhanced acetyl-CoA and polyketide biosynthesis

Synthesis of polyketides at high titer and yield is important for producing pharmaceuticals and biorenewable chemical precursors. In this work, we engineered cofactor and transport pathways in Saccharomyces cerevisiae to increase acetyl-CoA, an important polyketide building block. The highly regulated yeast pyruvate dehydrogenase bypass pathway was supplemented by overexpressing a modified Escherichia coli pyruvate dehydrogenase complex (PDHm) that accepts NADP⁺ for acetyl-CoA production. After 24 h of cultivation, a 3.7-fold increase in NADPH/NADP⁺ ratio was observed relative to the base strain, and a 2.2-fold increase relative to introduction of the native E. coli PDH. Both E. coli pathways increased acetyl-CoA levels approximately 2-fold relative to the yeast base strain. Combining PDHm with a ZWF1 deletion to block the major yeast NADPH biosynthesis pathway resulted in a 12-fold NADPH boost and a 2.2-fold increase in acetyl-CoA. At 48 h, only this coupled approach showed increased acetyl-CoA levels, 3.0-fold higher than that of the base strain. The impact on polyketide synthesis was evaluated in a S. cerevisiae strain expressing the Gerbera hybrida 2-pyrone synthase (2-PS) for the production of the polyketide triacetic acid lactone (TAL). Titers of TAL relative to the base strain improved only 30% with the native E. coli PDH, but 3.0-fold with PDHm and 4.4-fold with PDHm in the Δzwf1 strain. Carbon was further routed toward TAL production by reducing mitochondrial transport of pyruvate and acetyl-CoA; deletions in genes POR2, MPC2, PDA1, or YAT2 each increased titer 2–3-fold over the base strain (up to 0.8 g/L), and in combination to 1.4 g/L. Combining the two approaches (NADPH-generating acetyl-CoA pathway plus reduced metabolite flux into the mitochondria) resulted in a final TAL titer of 1.6 g/L, a 6.4-fold increase over the non-engineered yeast strain, and 35% of theoretical yield (0.16 g/g glucose), the highest reported to date. These biological driving forces present new avenues for improving high-yield production of acetyl-CoA derived compounds.     

Hyaluronic acid production and molecular weight improvement by redirection of carbon flux towards its biosynthesis pathway

Hyaluronic acid (HA) production in Streptococcus zooepidemicus competes for the carbon source along with biomass formation, lactate formation (via glycolysis) and pentose phosphate pathway (PPP). In our studies, increase in HA molecular weight was observed by redirecting the carbon flux towards HA biosynthesis pathway by partially inhibiting the glycolytic pathway. Batch bioreactor (1.2 L) studies showed that with the addition of 25 μM sodium iodoacetate, 5 g/L tryptophan and 10 g/L pyruvate, which are glycolytic inhibitors, HA molecular weight increased to 3.2, 3.2 and 3.1 MDa respectively compared to control run (2.4 MDa). Yield coefficients Y_HA/S and Y_LA/S showed inverse relationship, indicating competition for glucose between HA and lactic acid formation. Addition of 5 g/L glutamine along with 25 μM sodium iodoacetate also increased the HA concentration to 5.0 g/L from 2.0 g/L in control run. Metabolic flux analysis studies show that concentration and molecular weight of HA is increased by decreasing carbon flux towards glycolysis and PPP and increasing carbon flux towards HA precursor formation. It was observed that specific growth rate of the cells correlated positively to the specific HA production rate and negatively to the molecular weight of HA produced. Addition of antioxidant tannic acid also increased molecular weight to 3.0 MDa.     

Metabolic engineering of Cupriavidus necator for heterotrophic and autotrophic alka(e)ne production

Alkanes of defined carbon chain lengths can serve as alternatives to petroleum-based fuels. Recently, microbial pathways of alkane biosynthesis have been identified and enabled the production of alkanes in non-native producing microorganisms using metabolic engineering strategies. The chemoautotrophic bacterium Cupriavidus necator has great potential for producing chemicals from CO₂: it is known to have one of the highest growth rate among natural autotrophic bacteria and under nutrient imbalance it directs most of its carbon flux to the synthesis of the acetyl-CoA derived polymer, polyhydroxybutyrate (PHB), (up to 80% of intracellular content). Alkane synthesis pathway from Synechococcus elongatus (2 genes coding an acyl-ACP reductase and an aldehyde deformylating oxygenase) was heterologously expressed in a C. necator mutant strain deficient in the PHB synthesis pathway. Under heterotrophic condition on fructose we showed that under nitrogen limitation, in presence of an organic phase (decane), the strain produced up to 670 mg/L total hydrocarbons containing 435 mg/l of alkanes consisting of 286 mg/l of pentadecane, 131 mg/l of heptadecene, 18 mg/l of heptadecane, and 236 mg/l of hexadecanal. We report here the highest level of alka(e)nes production by an engineered C. necator to date. We also demonstrated the first reported alka(e)nes production by a non-native alkane producer from CO₂ as the sole carbon source.     

The carbon flux of global rivers: A re-evaluation of amount and spatial patterns

Global rivers connect three large carbon reservoirs in the world: soil, atmosphere, and ocean. The amount and spatial pattern of riverine carbon flux are essential for the global carbon budget but are still not well understood. Therefore, three linear regression models for riverine DOC (dissolved organic carbon), POC (particulate organic carbon), and DIC (dissolved inorganic carbon) fluxes were established with related generating and transfer factors based on an updated global database. The three models then were applied to simulate the spatial distribution of riverine DOC, POC, and DIC fluxes and to estimate the total global riverine carbon flux. The major conclusions of this study are as follows: the correlation analysis showed that riverine DOC flux is significantly related to discharge (r² = 0.93, n = 109) and soil organic carbon amount (r² = 0.60), POC flux increases with discharge (r² = 0.55, n = 98) and amount of soil erosion (r² = 0.48), and DIC flux is strongly linked to CO₂ consumption by rock weathering (r² = 0.66, n = 111) and discharge (r² = 0.63). In addition, Asia exports more DOC and POC than other continents and North America exports more DIC. The Atlantic Ocean accepts the major portion of riverine DOC, POC, and DIC fluxes of all the oceans. The highest riverine DOC flux occurs in the 0–30°S zone, and the highest riverine POC and DIC fluxes appear in the 30–60°N zone. Furthermore, re-estimation revealed that global rivers export approximately 1.06 Pg C to oceans every year, including 0.24 Pg DOC, 0.24 Pg POC, 0.41 Pg DIC, and 0.17 Pg PIC.     

Engineering high-level production of fatty alcohols by Saccharomyces cerevisiae from lignocellulosic feedstocks

Fatty alcohols in the C12-C18 range are used in personal care products, lubricants, and potentially biofuels. These compounds can be produced from the fatty acid pathway by a fatty acid reductase (FAR), yet yields from the preferred industrial host Saccharomyces cerevisiae remain under 2% of the theoretical maximum from glucose. Here we improved titer and yield of fatty alcohols using an approach involving quantitative analysis of protein levels and metabolic flux, engineering enzyme level and localization, pull-push-block engineering of carbon flux, and cofactor balancing. We compared four heterologous FARs, finding highest activity and endoplasmic reticulum localization from a Mus musculus FAR. After screening an additional twenty-one single-gene edits, we identified increasing FAR expression; deleting competing reactions encoded by DGA1, HFD1, and ADH6; overexpressing a mutant acetyl-CoA carboxylase; limiting NADPH and carbon usage by the glutamate dehydrogenase encoded by GDH1; and overexpressing the Δ9-desaturase encoded by OLE1 as successful strategies to improve titer. Our final strain produced 1.2 g/L fatty alcohols in shake flasks, and 6.0 g/L in fed-batch fermentation, corresponding to ~ 20% of the maximum theoretical yield from glucose, the highest titers and yields reported to date in S. cerevisiae. We further demonstrate high-level production from lignocellulosic feedstocks derived from ionic-liquid treated switchgrass and sorghum, reaching 0.7 g/L in shake flasks. Altogether, our work represents progress towards efficient and renewable microbial production of fatty acid-derived products.     

Osmoregulation in Dunaliella,Part II: Photosynthesis and starch contribute carbon for glycerol synthesis during a salt stress in Dunaliella tertiolecta

In response to an osmotic stress, Dunaliella tertiolecta osmoregulates by metabolizing intracellular glycerol as compatible solute. Upon the application of a salt stress to 0.17 M or 0.7 M NaCl grown D. tertiolecta cells, rates of total glycerol synthesis were substantially higher than that arising from photosynthetic ¹⁴CO₂ fixation into glycerol. The source of this extra carbon is the reserve starch pool. The contribution of carbon from the starch breakdown to glycerol synthesis was estimated from the difference between the total glycerol synthesized and that arising from ¹⁴CO₂ fixation. The maximum observed flux of carbon from ¹⁴CO₂ to glycerol from photosynthesis was of the order of 15–20 μmol ¹⁴C-glycerol mg⁻¹ Chl h⁻¹, whereas the total glycerol synthesis reached about 70 μmol glycerol mg⁻¹ Chl h⁻¹. The contribution of products of starch breakdown to glycerol synthesis increased progressively with increasing salt stress. In light, contrary to prevailing assumptions, both the photosynthesis and the starch breakdown contribute carbon to glycerol biosynthesis. The relative contributions of these two processes in the light, while cells were actively photosynthesizing, depended on the magnitude of the salt stress. On application of dilution stress, the flux of carbon from newly photosynthetically fixed ¹⁴CO₂ into glycerol was reduced progressively with increasing dilution stress that was also accompanied by a decline in total glycerol contents of the cell. The maximum observed rate of glycerol dissimilation was about 135 μmol glycerol mg⁻¹ Chl h⁻¹.     

Physicochemical characterization of a thermostable glycoprotein bioemulsifier from Solibacillus silvestris AM1

A novel estuarine bacterial strain, Solibacillus silvestris AM1, was found to produce an extracellular, multimeric glycoprotein bioemulsifier, termed AM1, with a MW of 200 kDa and containing 30 kDa monomeric subunits. The bioemulsifier contained 3.6% of the minor carbohydrate components galactose and ribose/xylose. LC/MS-MS of the 30 kDa subunit revealed its homology with a flagellin-like protein arranged in the form of fibers, as shown by transmission electron micrographs. This is the first report of a flagellin-like protein that exhibits bioemulsifier activity being produced from a member of the Solibacillus genus. Bioemulsifier AM1 has a high emulsification index of 62.5% with 10^?2 critical micellar dilution. It was found to be thermostable and active in the pH 5–9 and 0–5 M NaCl ranges. Moreover, AM1 formed stable emulsions with a broad range of solvents, including aliphatics, aromatic hydrocarbons and oils, performing better than the well-known bioemulsifier emulsan. Emulsions formed with trichlorobenzene and paraffin oil have a pseudoplastic non-Newtonian rheological property, as observed by particle size and shear stress analysis. AM1, an eco-friendly bioemulsifier, formed stable emulsions in varied physical conditions, and these attributes may prove to be advantageous in cosmetic, pharmaceutical and environmental applications.     

Methanol vapor biofiltration coupled with continuous production of recombinant endochitinase Ech42 by Pichia Pastoris

Methanol biofiltration using methylotrophic microorganisms has been previously reported by various authors. In a previous study, a modified strain of Pichia pastoris was tested for the ability to produce endochitinase (Ech42) when coupled with methanol vapor biodegradation in batch tests. The next challenge was to validate the process in a continuous system. Thus, in the present study, a biofilter packed with perlite and inoculated with P. pastoris transformed with the plasmid pPIC-ech42 was used for methanol vapor biofiltration and the continuous production of recombinant endochitinase (Ech42) for 60 days. The maximum elimination capacity (EC) of methanol obtained was 1320 g m^?3 h^?1 at a loading rate of 1465 g m^?3 h^?1. The extracellular protein production rate in the leachate was 2360 μg h^?1 with a chitinase enzymatic activity of 123 U L^?1. The protein content on the biofilm samples was negligible, indicating the effectiveness of the overall process and of P. pastoris to excrete proteins. The carbon balance indicated that 81% of the consumed methanol was mineralized and 5.8% was incorporated into biomass. The results of this study and the economic balance underscore the promising application of linking methanol vapor biofiltration to the continuous production of recombinant proteins.     

Methylotrophic Metabolism Is Advantageous for Methylobacterium extorquens during Colonization of Medicago truncatula under Competitive Conditions

Facultative methylotrophic bacteria of the genus Methylobacterium are commonly found in association with plants. Inoculation experiments were performed to study the importance of methylotrophic metabolism for colonization of the model legume Medicago truncatula. Competition experiments with Methylobacterium extorquens wild-type strain AM1 and methylotrophy mutants revealed that the ability to use methanol as a carbon and energy source provides a selective advantage during colonization of M. truncatula. Differences in the fitness of mutants defective in different stages of methylotrophic metabolism were found; whereas approximately 25% of the mutant incapable of oxidizing methanol to formaldehyde (deficient in methanol dehydrogenase) was recovered, 10% or less of the mutants incapable of oxidizing formaldehyde to CO₂ (defective in biosynthesis of the cofactor tetrahydromethanopterin) was recovered. Interestingly, impaired fitness of the mutant strains compared with the wild type was found on leaves and roots. Single-inoculation experiments showed, however, that mutants with defects in methylotrophy were capable of plant colonization at the wild-type level, indicating that methanol is not the only carbon source that is accessible to Methylobacterium while it is associated with plants. Fluorescence microscopy with a green fluorescent protein-labeled derivative of M. extorquens AM1 revealed that the majority of the bacterial cells on leaves were on the surface and that the cells were most abundant on the lower, abaxial side. However, bacterial cells were also found in the intercellular spaces inside the leaves, especially in the epidermal cell layer and immediately underneath this layer.     

Decreased C-reactive protein-induced resistin production in human monocytes by simvastatin

Background: Resistin is a novel cysteine-rich protein that plays a role in the development of insulin resistance and atherosclerosis in rodents, while its role in humans is unclear. C-reactive protein (CRP) is an important risk predictor for coronary heart disease, and it can also modify the expression of genes involved in atherogenesis. Statins have been demonstrated to possess lipid lowering effects as well as pleiotropic properties. We hypothesize that CRP may result in overexpression of resistin, and statin may decrease CRP-induced resistin expression in cultured human peripheral blood monocytes (PBMC). Purpose: The aim of the present study, therefore, was to assess the effects of both CRP on resistin expression and simvastatin on CRP-induced of resistin expression in cultured human PBMC. Methods: Human PBMC were isolated from the whole blood of healthy volunteers by density gradient centrifugation. First, cells were incubated with varying concentrations of CRP (0, 5, 10, 25 and 50 μg/ml) for 24 h for assessing the dose-dependent effects on resistin expression. Second, 25 μg/ml of CRP was used to time-dependent evaluation on resistin expression (0, 3, 6, 12 and 24 h). Moreover, cells were pretreated with simvastatin at concentrations from 0.1 to 1 μM for 2 h, and then co-incubated with 25 μg/ml CRP for 24 h for evaluating effect of statin on resistin production subjected to CRP. Finally, in additional experiments, monocytes were incubated with 1 μM simvastatin in the absence or presence of 100 μM mevalonate or 10 μM geranylgeranyl-pyrophosphate (GGPP) or 10 μM farnesylpyrophosphate (FPP) for 2 h, then co-incubated with CRP for 24 h for examining whether effects of statin on CRP-induced resistin expression was independent of 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase inhibitors. Results: The results showed that CRP induced both mRNA expression and protein secretion of resistin in a dose- and time-dependent manner. Co-incubation with simvastatin significantly inhibited CRP-induced up-regulation of mRNA and protein expression of resistin. Treatment with mevalonate, GGPP, but not FPP, reversed the inhibition of resistin expression caused by simvastatin, suggesting that simvastatin regulated resistin expression in culture human PBMC through the mevalonate–GGPP signal pathway. Conclusions: In the present study, the data showed that CRP could significantly increase resistin expression in cultured human PBMC, and this effect was inhibited by simvastatin, suggesting that CRP and resistin might be involved in the pathogenesis of atherosclerosis, and statin therapy might be beneficial for atherosclerotic disease by modifying CRP-induced resistin overexpression in PBMC.     

Heterologous expression and characterisation of a biosynthetic thiolase from Clostridium butyricum DSM 10702

Biosynthetic thiolases (EC 2.3.1.9) are key enzymes in the branched catabolism of diverse clostridia as their activity and regulation influence the production of organic acids and solvents. In Clostridium butyricum, they are also involved in the production of hydrogen as a sustainable and environmentally benign energy source. In this study, the gene coding for thiolase from C. butyricum DSM 10702 was cloned by genome walking. It was found to consist of 1179 bp coding for a protein with 393 amino acids and a deduced molecular weight of 41.4 kDa. The enzyme was fused to an N-terminal his-tag, expressed in Escherichia coli, purified to near homogeneity and characterised for biochemical and kinetic properties. Gel filtration chromatography revealed that the catalytically active enzyme consists of a homotetramer. The enzyme showed a K_M of ～32 μM towards acetoacetyl-CoA and of ～21 μM towards CoASH at 30 °C and pH 8.0. Claisen condensation of acetyl-CoA by thiolase was analysed in a coupled enzyme assay, where β-hydroxybutyryl-CoA dehydrogenase was applied catalysing the subsequent NADH-dependant reduction of the formed condensation product acetoacetyl-CoA. For this purpose the latter enzyme was cloned from C. butyricum DSM 10702 and recombinantly expressed in E. coli. The K_M of thiolase towards acetyl-CoA was ～674 μM at 30 °C and pH 7.5. Acetyl-CoA condensation was inhibited even at micromolar concentrations of CoASH indicating that CoASH has an important regulatory function in vivo.     

Genetic and Phenotypic Comparison of Facultative Methylotrophy between Methylobacterium extorquens Strains PA1 and AM1

Methylobacterium extorquens AM1, a strain serendipitously isolated half a century ago, has become the best-characterized model system for the study of aerobic methylotrophy (the ability to grow on reduced single-carbon compounds). However, with 5 replicons and 174 insertion sequence (IS) elements in the genome as well as a long history of domestication in the laboratory, genetic and genomic analysis of M. extorquens AM1 face several challenges. On the contrary, a recently isolated strain - M. extorquens PA1- is closely related to M. extorquens AM1 (100% 16S rRNA identity) and contains a streamlined genome with a single replicon and only 20 IS elements. With the exception of the methylamine dehydrogenase encoding gene cluster (mau), genes known to be involved in methylotrophy are well conserved between M. extorquens AM1 and M. extorquens PA1. In this paper we report four primary findings regarding methylotrophy in PA1. First, with a few notable exceptions, the repertoire of methylotrophy genes between PA1 and AM1 is extremely similar. Second, PA1 grows faster with higher yields compared to AM1 on C₁ and multi-C substrates in minimal media, but AM1 grows faster in rich medium. Third, deletion mutants in PA1 throughout methylotrophy modules have the same C₁ growth phenotypes observed in AM1. Finally, the precision of our growth assays revealed several unexpected growth phenotypes for various knockout mutants that serve as leads for future work in understanding their basis and generality across Methylobacterium strains.