Investigating diproline segments in proteins: occurrences, conformation and classification

The covalent linkage between the side‐chain and the backbone nitrogen atom of proline leads to the formation of the five‐membered pyrrolidine ring and hence restriction of the backbone torsional angle ? to values of ?60 °± 30° for the L ‐proline. Diproline segments constitute a chain fragment with considerably reduced conformational choices. In the current study, the conformational states for the diproline segment ( ^L Pro‐ ^L Pro) found in proteins has been investigated with an emphasis on the cis and trans states for the Pro‐Pro peptide bond. The occurrence of diproline segments in turns and other secondary structures has been studied and compared to that of Xaa‐Pro‐Yaa segments in proteins which gives us a better understanding on the restriction imposed on other residues by the diproline segment and the single proline residue. The study indicates that P_II–P_II and P_II–α are the most favorable conformational states for the diproline segment. The analysis on Xaa‐Pro‐Yaa sequences reveals that the Xaa‐Pro peptide bond exists preferably as the trans conformer rather than the cis conformer. The present study may lead to a better understanding of the behavior of proline occurring in diproline segments which can facilitate various designed diproline‐based synthetic templates for biological and structural studies. © 2011 Wiley Periodicals, Inc. Biopolymers 97: 54–64, 2012.     

Solid-state conformations of α-Aminoisobutyryl-L-prolyl sequences: Crystal structure of Boc-Aib-L-Pro-OBzl

The protected dipeptide Boc-Aib-Pro-OBzl, C₂₁H₃₀N₂O₅, crystallizes in the orthorhombic space group P2₁2₁2₁, with a = 12.820, b = 10.529, c = 16.548Å, and Z = 4. The crystal structure has been solved by direct methods and refined to an R value of 0.074 for 1352 reflections. The Boc-Aib-Pro-OBzl molecule has been shown to adopt an unfolded conformation in the solid state with ?_Aib = 50.5°, Ψ_Aib = 45.3°, ?_Pro = ?64.6°, and Ψ_Pro = 148.1°. The result is in marked contrast with the reported crystal structure of Cbz-Aib-Pro-NHMe, which adopts an intramolecularly hydrogen-bonded β-turn conformation. Comparison with 13 reported conformations of Aib-Pro sequences in the crystalline state revealed that the Aib-Pro sequence adopts an unfolded conformation if the residue that immediately follows the dipeptide sequence possesses no hydrogen available for hydrogen bonding, while a β-turn conformation is preferred if the Pro residue is followed by an NH group. Correlation between pyrrolidine ring puckering of the Pro residue and main-chain conformation in Aib-Pro sequences is discussed.     

Steric and electronic interactions controlling the cis/trans isomer equilibrium at X‐pro tertiary amide motifs in solution

A systematic understanding of the noncovalent interactions that influence the structures of the cis conformers and the equilibrium between the cis and the trans conformers, of the X‐Pro tertiary amide motifs, is presented based on analyses of ¹H‐, ¹³C‐NMR and FTIR absorption spectra of two sets of homologous peptides, X‐Pro‐Aib‐OMe and X‐Pro‐NH‐Me (where X is acetyl, propionyl, isobutyryl and pivaloyl), in solvents of varying polarities. First, this work shows that the cis conformers of any X‐Pro tertiary amide motif, including Piv‐Pro, are accessible in the new motifs X‐Pro‐Aib‐OMe, in solution. These conformers are uniquely observable by FTIR spectroscopy at ambient temperatures and by NMR spectroscopy from temperatures as high as 273 K. This is made possible by the persistent presence of n_i‐1→π_i* interactions at Aib, which also influence the disappearance of steric effects at these cis X‐Pro rotamers. Second, contrary to conventional understanding, the energy contribution of steric effects to the cis/trans equilibrium at the X‐Pro motifs is found to be nonvariant (0.54 ± 0.02 kcal/mol) with increase in steric bulk on the X group. Third, the current studies provide direct evidence for the weak intramolecular interactions namely the n_i‐1→π_i*, the N_Pro???H_i+1 (C₅a), and the C₇ hydrogen bond that operate and influence the structures, stabilities, and dynamics between different conformational states of X‐Pro tertiary amide motifs. NMR and IR spectral data suggest that the cis conformers of X‐Pro motifs are ensembles of short‐lived rotamers about the C′_X–N_Pro bond. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 66–77, 2014.     

Magnesium methoxide‐induced chemiluminescent decomposition of bicyclic dioxetanes bearing a 2′‐alkoxy‐2‐hydroxy‐1,1′‐binaphthyl‐7‐yl moiety

Bicyclic dioxetanes 2a–c bearing a 2′‐alkoxy‐2‐hydroxy‐1,1′‐binaphthyl‐7‐yl moiety were effectively synthesized and their base‐induced chemiluminescent decomposition was investigated by the use of alkaline metal (Na⁺ and K⁺) or Mg²⁺ alkoxide in MeOH. When 2a–c were treated with tetrabutylammonium fluoride (TBAF) in dimethyl sulfoxide (DMSO) as a reference system, they showed chemiluminescence as a flash of orange light (maximum wavelength λ_max^CL = 573–577 nm) with efficiency Φ^CL = 6–8 × 10^–2. On the other hand, for an alkaline metal (Na⁺ or K⁺) alkoxide/MeOH system, 2a–c decomposed slowly to emit a glow of chemiluminescence, the spectra of which were shifted slightly toward red from the TBAF/DMSO system, and Φ^CL (= 1.4–2.3 × 10^–3) was considerably decreased. In addition, Mg(OMe)₂ was found to play a characteristic role as a base for the chemiluminescent decomposition of 2a–c through coordination to the intermediary oxidoaryl‐substituted dioxetanes 13. Thus, Mg²⁺ increased Φ^CL to more than twice those with Na⁺ or K⁺, while it shifted λ_max^CL considerably toward blue (λ_max^CL = 550–566 nm). Copyright © 2012 John Wiley & Sons, Ltd.     

Basic conformers in β‐peptides

The conformation of oligomers of β‐amino acids of the general type Ac‐[β‐Xaa]_n‐NHMe (β‐Xaa = β‐Ala, β‐Aib, and β‐Abu; n = 1–4) was systematically examined at different levels of ab initio molecular orbital theory (HF/6‐31G*, HF/3‐21G). The solvent influence was considered employing two quantum‐mechanical self‐consistent reaction field models. The results show a wide variety of possibilities for the formation of characteristic elements of secondary structure in β‐peptides. Most of them can be derived from the monomer units of blocked β‐peptides with n = 1. The stability and geometries of the β‐peptide structures are considerably influenced by the side‐chain positions, by the configurations at the C^α‐ and C^β‐atoms of the β‐amino acid constituents, and especially by environmental effects. Structure peculiarities of β‐peptides, in particular those of various helix alternatives, are discussed in relation to typical elements of secondary structure in α‐peptides. © 1999 John Wiley & Sons, Inc. Biopoly 50: 167–184, 1999     

Studies on the Selective Trifluoroacetolytic Scission of Native Peptaibols and Model Peptides Using HPLC and ESI‐CID‐MS

Representative members of a group of linear, N‐acylated polypeptide antibiotics (peptaibols) containing α‐aminoisobutyric acid (Aib) and, in part, isovaline (Iva), as well as proteinogenic amino acids and a C‐terminal‐bonded 2‐amino alcohol, were treated with anhydrous trifluoroacetic acid (TFA) at 37° for 0.5–26 h. The resulting fragments were separated by HPLC and characterized by electrospray ionization collision‐induced dissociation mass spectrometry (ESI‐CID‐MS). The following 16–20‐residue peptaibols were investigated: natural, microheterogeneous mixtures of antiamoebins and alamethicin F50, uniform paracelsin A, and synthetic trichotoxin A50/E. In the natural peptides, bonds formed between Aib (Iva) and Pro (Hyp) were rapidly and selectively cleaved within 0.5 h. Furthermore, TFA esters of the C‐terminal amino alcohols were formed. Depending on time, release of C‐terminal tri‐ and tetrapeptides as well as amino acids from the major fragments was observed. Synthetic homooligopeptides, namely Z‐ and Ac‐(Aib)₁₀‐O^tBu and Z‐(Aib)₇‐O^tBu, were analyzed for comparison. On treatment with TFA, a regular series of Z‐(Aib)_10–5‐OH from Z‐(Aib)₁₀‐O^tBu were detected within 0.5 h, and, after 3 h, release of a regular series of Z‐(Aib)_7–3‐OH from Z‐(Aib)₇‐O^tBu were observed. Moreover, concomitant release of the series of H‐(Aib)_10–3‐OH from the decapeptide occurred. From these data, a repetitive cleavage mechanism via intermediate formation of C‐terminal oxazolones on trifluoroacetolysis is proposed. Furthermore, their formation and stability in native peptaibols are correlated with subtle structural differences in protein amino acids linked to Aib. From the conspicuous concordance of the formation and abundance of regular series of trifluoroacetolytic fragments and of positive ions of the b‐series in CID‐MS, the generation of intermediate oxazolonium ions in both gas and liquid phase is concluded.     

Peptide–peptoid hybrids based on (1–11)‐parathyroid hormone analogs

A series of peptide–peptoid hybrids, containing N‐substituted glycines, were synthesized based on the H‐Aib‐Val‐Aib‐Glu‐Ile‐Gln‐Leu‐Nle‐His‐Gln‐Har‐NH₂ (Har = Homoarginine) as the parent parathyroid hormone (1–11) analog. The compounds were pharmacologically characterized in their agonistic activity at the parathyroid hormone 1 receptor. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Noncollagenous region of the streptococcal collagen‐like protein is a trimerization domain that supports refolding of adjacent homologous and heterologous collagenous domains

Proper folding of the (Gly‐Xaa‐Yaa)_n sequence of animal collagens requires adjacent N‐ or C‐terminal noncollagenous trimerization domains which often contain coiled‐coil or beta sheet structure. Collagen‐like proteins have been found recently in a number of bacteria, but little is known about their folding mechanism. The Scl2 collagen‐like protein from Streptococcus pyogenes has an N‐terminal globular domain, designated V_sp, adjacent to its triple‐helix domain. The V_sp domain is required for proper refolding of the Scl2 protein in vitro. Here, recombinant V_sp domain alone is shown to form trimers with a significant α‐helix content and to have a thermal stability of T_m = 45°C. Examination of a new construct shows that the V_sp domain facilitates efficient in vitro refolding only when it is located N‐terminal to the triple‐helix domain but not when C‐terminal to the triple‐helix domain. Fusion of the V_sp domain N‐terminal to a heterologous (Gly‐Xaa‐Yaa)_n sequence from Clostridium perfringens led to correct folding and refolding of this triple‐helix, which was unable to fold into a triple‐helical, soluble protein on its own. These results suggest that placement of a functional trimerization module adjacent to a heterologous Gly‐Xaa‐Yaa repeating sequence can lead to proper folding in some cases but also shows specificity in the relative location of the trimerization and triple‐helix domains. This information about their modular nature can be used in the production of novel types of bacterial collagen for biomaterial applications.     

High‐resolution structures of collagen‐like peptides [(Pro‐Pro‐Gly)4‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)4]: Implications for triple‐helix hydration and Hyp(X) puckering

Structures of (Pro‐Pro‐Gly)₄‐Xaa‐Yaa‐Gly‐(Pro‐Pro‐Gly)₄ (ppg9‐XYG) where (Xaa, Yaa) = (Pro, Hyp), (Hyp, Pro) or (Hyp, Hyp) were analyzed at high resolution using synchrotron radiation. Molecular and crystal structures of these peptides are very similar to those of the (Pro‐Pro‐Gly)₉ peptide. The results obtained in this study, together with those obtained from related compounds, indicated the puckering propensity of the Hyp in the X position: (1) Hyp(X) residues involved in the Hyp(X):Pro(Y) stacking pairs prefer the down‐puckering conformation, as in ppg9‐OPG, and ppg9‐OOG; (2) Hyp(X) residues involved in the Hyp(X):Hyp(Y) stacking pairs prefer the up‐puckering conformation if there is no specific reason to adopt the down‐puckering conformation. Water molecules in these peptide crystals are classified into two groups, the 1st and 2nd hydration waters. Water molecules in the 1st hydration group have direct hydrogen bonds with peptide oxygen atoms, whereas those in the 2nd hydration group do not. Compared with globular proteins, the number of water molecules in the 2nd hydration shell of the ppg9‐XYG peptides is very large, likely due to the unique rod‐like molecular structure of collagen model peptides. In the collagen helix, the amino acid residues in the X and Y positions must protrude outside of the triple helix, which forces even the hydrophobic side chains, such as Pro, to be exposed to the surrounding water molecules. Therefore, most of the waters in the 2nd hydration shell are covering hydrophobic Pro side chains by forming clathrate structures. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 361–372, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

ω‐Turn: A novel β‐turn mimic in globular proteins stabilized by main‐chain to side‐chain CH···O interaction

Mimicry of structural motifs is a common feature in proteins. The 10‐membered hydrogen‐bonded ring involving the main‐chain C?O in a β‐turn can be formed using a side‐chain carbonyl group leading to Asx‐turn. We show that the N? H component of hydrogen bond can be replaced by a C^γ‐H group in the side chain, culminating in a nonconventional C? H···O interaction. Because of its shape this β‐turn mimic is designated as ω‐turn, which is found to occur ～three times per 100 residues. Three residues (i to i + 2) constitute the turn with the C? H···O interaction occurring between the terminal residues, constraining the torsion angles ?_{i + 1}, ψ_{i + 1}, ?_{i + 2} and χ′_{1(i + 2)} (using the interacting C^γ atom). Based on these angles there are two types of ω‐turns, each of which can be further divided into two groups. C^β‐branched side‐chains, and Met and Gln have high propensities to occur at i + 2; for the last two residues the carbonyl oxygen may participate in an additional interaction involving the S and amino group, respectively. With Cys occupying the i + 1 position, such turns are found in the metal‐binding sites. N‐linked glycosylation occurs at the consensus pattern Asn‐Xaa‐Ser/Thr; with Thr at i + 2, the sequence can adopt the secondary structure of a ω‐turn, which may be the recognition site for protein modification. Location between two β‐strands is the most common occurrence in protein tertiary structure, and being generally exposed ω‐turn may constitute the antigenic determinant site. It is a stable scaffold and may be used in protein engineering and peptide design. Proteins 2015; 83:203–214. © 2014 Wiley Periodicals, Inc.     

Molecular modeling and design of regioselectively addressable functionalized templates with rigidified three‐dimensional structures

Extensive conformational analysis of a series of β‐alkyl substituted cyclopeptides—cyclo(Pro¹–Xaa²–Nle³–Ala⁴–Nle⁵–Pro⁶–Xaa⁷–Nle⁸–Ala⁹–Nle¹⁰) and cyclo[Pro¹–Xaa²–Nle³–(Cys⁴– Nle⁵–Pro⁶–Xaa⁷–Nle⁸–Cys⁹)–Nle¹⁰] as well as their corresponding unsubstituted core structures cyclo(Pro¹–Xaa²–Ala³–Ala⁴–Ala⁵–Pro⁶–Xaa⁷–Ala⁸–Ala⁹–Ala¹⁰) and cyclo(Pro¹–Xaa²–Ala³–Cys⁴– Ala⁵–Pro⁶–Xaa⁷–Ala⁸–Cys⁹–Ala¹⁰) has been performed employing both the ECEPP/2 and the MAB force fields (Xaa = Gly, L ‐Ala, D ‐Ala, Aib, and D ‐Pro). Results show that (a) possible three‐dimensional structures of the cyclo(Pro¹–Gly²–Lys³–Ala⁴–Lys⁵–Pro⁶–Gly⁷–Lys⁸–Ala⁹–Lys¹⁰) molecule are not limited to a single extended “rectangular” conformation with all Lys side chains oriented at the same side of the molecule; (b) conformational equilibrium in monocyclic analogues obtained by replacements of conformationally flexible Gly residues for L ‐Ala, D ‐Ala, Aib, or D ‐Pro is not significantly shifted towards the target “rectangular” conformational type; and (c) introduction of disulfide bridges between positions 4 and 9 is a very powerful way to stabilize the target conformations in the resulting bicyclic molecules. These findings form the basis for further design of rigidified regioselectively addressable functionalized templates with many application areas ranging from biostructural to diagnostic purposes. © 1999 John Wiley & Sons, Inc. Biopoly 50: 361–372, 1999     

Type II β-turn conformation of pivaloyl-L-prolyl-α-aminoisobutyryl-N-methylamide: Theoretical,spectroscopic, and X-ray studies

Pivaloyl-L -Pro-Aib-N-methylamide has been shown to possess one intramolecular hydrogen bond in (CD₃)₂SO solution, by ¹H-nmr methods, suggesting the existence of β-turns, with Pro-Aib as the corner residues. Theoretical conformational analysis suggests that Type II β-turn conformations are about 2 kcal mol^?1 more stable than Type III structures. A crystallographic study has established the Type II β-turn in the solid state. The molecule crystallizes in the space group P2₁ with a = 5.865 Å, b = 11.421 Å, c = 12.966 Å, β = 97.55°, and Z = 2. The structure has been refined to a final R value of 0.061. The Type II β-turn conformation is stabilized by an intramolecular 4 → 1 hydrogen bond between the methylamide NH and the pivaloyl CO group. The conformational angles are ?_Pro = ?57.8°, ψ_Pro = 139.3°, ?_Aib = 61.4°, and ψ_Aib = 25.1°. The Type II β-turn conformation for Pro-Aib in this peptide is compared with the Type III structures observed for the same segment in larger peptides.     

Stereochemistry of Schellman motifs in peptides: Crystal structure of a hexapeptide with a C‐terminus 6 → 1 hydrogen bond

The Schellman motif is a widely observed helix terminating structural motif in proteins, which is generated when the C‐terminus residue adopts a left‐handed helical (α_L) conformation. The resulting hydrogen‐bonding pattern involves the formation of an intramolecular 6 → 1 interaction. This helix terminating motif is readily mimicked in synthetic helical peptides by placing an achiral residue at the penultimate position of the sequence. Thus far, the Schellman motif has been characterized crystallographically only in peptide helices of length 7 residues or greater. The structure of the hexapeptide Boc–Pro–Aib–Gly–Leu–Aib–Leu–OMe in crystals reveal a short helical stretch terminated by a Schellman motif, with the formation of 6 → 1 C‐terminus hydrogen bond. The crystals are in the space group P2₁2₁2₁ with a = 18.155(3) Å, b = 18.864(8) Å, c = 11.834(4) Å, and Z = 4 . The final R₁ and wR₂ values are 7.68 and 14.6%, respectively , for 1524 observed reflections [F_o ≥ 3ς(F_o)]. A 6 → 1 hydrogen bond between Pro(1)CO · · · Leu(6)NH and a 5 → 2 hydrogen bond between Aib(2)CO · · · Aib(5)NH are observed. An analysis of the available oligopeptides having an achiral Aib residue at the penultimate position suggests that chain length and sequence effects may be the other determining factors in formation of Schellman motifs. © 1999 John Wiley & Sons, Inc. Biopoly 50: 13–22, 1999     

X-Pro peptides: Solution and solid-state conformation of benzyloxycarbonyl-(Aib-Pro)2methyl ester,a type I β-turn

The synthesis of the tetrapeptide benzyloxycarbonyl(α-aminoisobutyryl-L -prolyl)₂-methyl ester (Z-(Aib-Pro)₂-OMe) and an analysis of its conformation in solution and the solid state are reported. Stepwise synthesis using dicyclohexylcarbodiimide leads to racemization at Pro(2). Evidence for the presence of diastereomeric tetrapeptides is obtained from 270-MHz¹H-nmr and 67.89-MHz ¹³C-nmr. The all-L tetrapeptide is obtained by fractional crystallization from ethyl acetate. The NH of Aib(3) is shown to be involved in an intramo-lecular hydrogen bond by variable-temperature ¹H-nmr and the solvent dependence of NH chemical shifts. The results are consistent with a β-turn conformation with Aib(1) and Pro(2) at the corners stabilized by a 4 → 1 hydrogen bond. The molecule crystallizes in the space group P2₁2₁2₁, with a = 8.839, b = 14.938, and c = 22.015 Å. The structure has been refined to an R value of 0.051. The peptide backbone is all-trans, and a 4 → 1 hydrogen bond, between the CO group of the urethane moiety and Aib(3) NH, is observed. Aib(1) and Pro(2) occupy the corner positions of a type I β-turn with ? = ?55.4°, Ψ = ?31.3° for Aib(1) and ? = ?71.6°, Ψ = ?38° for Pro(2). The tertiary amide unit linking Pro(2) and Aib(3) is significantly distorted from planarity (Δω = 14.3°).     

Crystal structures of Boc-D- and L-Iva-L-Pro-OBZl: Unturned conformation of Aib-Pro sequence unaffected by replacement of Me with Et in Aib

The crystal structures of the isovaline (Iva) containing dipeptides, Boc-D -Iva-L -Pro-OBz l and Boc-L -Iva-L -Pro-OBz l, were determined by x-ray diffraction. The diastereomeric peptides were shown to adopt unturned conformations closely similar to each other (?_Iva 52°, ψ_Iva 46°, ?_Pro–65°, and ψ_Pro 143° for D -Iva-L -Pro sequence and ?_Iva 52°, ψIva 44°, ?_Pro ?63°, and ψ_pro 148° for L -Iva-L -Pro sequence). The Pro ring of each peptide was in C^γ-endo conformation. The unusually large ∠C_Iva-N_Pro-C values (131° in both peptides) were observed, that was due to steric repulsion between the δ-methylene of Pro and the alkyl side chain of Iva residue. These conformations were essentially the same as that of the corresponding α-aminoisobutyric acid (Aib)-containing peptide Boc-Aib-L -Pro-OBz l. The result has demonstrated that replacement of either one of the two methyl groups of the Aib residue in Boc-Aib-L -Pro-OBz l with an ethyl group does not cause any significant change in the unturned conformation of the dipeptide. © 1993 John Wiley & Sons, Inc.     

Ribbon structure stabilized by C10 and C12 turns in αγ hybrid peptide

The present study describes the synthesis and crystallographic analysis of αγ hybrid peptides, Boc‐Gpn‐L‐Pro‐NHMe ( 1 ), Boc‐Aib‐Gpn‐L‐Pro‐NHMe ( 2 ), and Boc‐L‐Pro‐Aib‐Gpn‐L‐Pro‐NHMe ( 3 ). Peptides 1 and 2 adopt expanded 12‐membered (C₁₂) helical turn over γα segment. Peptide 3 promotes the ribbon structure stabilized by type II β‐turn (C₁₀) followed by the expanded C₁₂ helical γα turn. Both right‐handed and left‐handed helical conformations for Aib residue are observed in peptides 2 and 3 , respectively Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Epitope analysis of the multiphosphorylated peptide αs1‐casein(59–79)

The multiphosphorylated tryptic peptide α_s1‐casein(59–79) has been shown to be antigenic with anti‐casein antibodies. In an approach to determine the amino acyl residues critical for antibody binding we undertook an epitope analysis of the peptide using overlapping synthetic peptides. With α_s1‐casein(59–79) as the adsorbed antigen in a competitive ELISA only two of five overlapping synthetic peptides at 1 mM significantly inhibited binding of the anti‐casein antibodies. Peptides Glu‐Ser(P)‐Ile‐Ser(P)‐Ser(P)‐Ser(P)‐Glu‐Glu and Ile‐Val‐Pro‐Asn‐Ser(P)‐Val‐Glu‐Glu inhibited antibody binding by 20.0±3.6% and 60.3±7.9%, respectively. The epitope of Glu⁶³‐Ser(P)‐Ile‐Ser(P)‐Ser(P)‐Ser(P)‐Glu‐Glu⁷⁰ was further localised to the phosphoseryl cluster as the peptide Ser(P)‐Ser(P)‐Ser(P) significantly inhibited binding of the anti‐casein antibodies to α_s1‐casein(59–79) by 29.5±7.4%. Substitution of Ser(P)⁷⁵ with Ser⁷⁵ in the second inhibitory peptide Ile‐Val‐Pro‐Asn‐Ser(P)⁷⁵‐Val‐Glu‐Glu also abolished inhibition of antibody binding to α_s1‐casein (59–79) demonstrating that Ser(P)⁷⁵ is also a critical residue for recognition by the antibodies. These data show that the phosphorylated residues in the cluster sequence ‐Ser(P)⁶⁶‐Ser(P)‐Ser(P)⁶⁸ and in the sequence ‐Pro⁷³‐Asn‐Ser(P)‐Val‐Glu⁷⁷‐ are critical for antibody binding to α_s1‐casein(59–79) and further demonstrate that a highly phosphorylated segment of a protein can be antigenic. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

Conformations of peptides containing a chiral cyclic α, α‐disubstituted α‐amino acid within the sequence of Aib residues

A single chiral cyclic α,α‐disubstituted amino acid, (3S,4S)‐1‐amino‐(3,4‐dimethoxy)cyclopentanecarboxylic acid [(S,S)‐Ac₅c^dOM], was placed at the N‐terminal or C‐terminal positions of achiral α‐aminoisobutyric acid (Aib) peptide segments. The IR and ¹H NMR spectra indicated that the dominant conformations of two peptides Cbz‐[(S,S)‐Ac₅c^dOM]‐(Aib)₄‐OEt ( 1) and Cbz‐(Aib)₄‐[(S,S)‐Ac₅c^dOM]‐OMe (2) in solution were helical structures. X‐ray crystallographic analysis of 1 and 2 revealed that a left‐handed (M) 3₁₀‐helical structure was present in 1 and that a right‐handed (P) 3₁₀‐helical structure was present in 2 in their crystalline states. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Conformations of helical Aib peptides containing a pair of l‐amino acid and d‐amino acid

A pair of l ‐leucine (l ‐Leu) and d ‐leucine (d ‐Leu) was incorporated into α‐aminoisobutyric acid (Aib) peptide segments. The dominant conformations of four hexapeptides, Boc‐l ‐Leu‐Aib‐Aib‐Aib‐Aib‐l ‐Leu‐OMe (1a), Boc‐d ‐Leu‐Aib‐Aib‐Aib‐Aib‐l ‐Leu‐OMe (1b), Boc‐Aib‐Aib‐l ‐Leu‐l ‐Leu‐Aib‐Aib‐OMe (2a), and Boc‐Aib‐Aib‐d ‐Leu‐l ‐Leu‐Aib‐Aib‐OMe (2b), were investigated by IR, ¹H NMR, CD spectra, and X‐ray crystallographic analysis. All peptides 1a,b and 2a,b formed 3₁₀‐helical structures in solution. X‐ray crystallographic analysis revealed that right‐handed (P) 3₁₀‐helices were present in 1a and 1b and a mixture of right‐handed (P) and left‐handed (M) 3₁₀‐helices was present in 2b in their crystalline states. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Crystallographic characterization of the α,γ C12 helix in hybrid peptide sequences

The solid‐state conformations of two αγ hybrid peptides Boc‐[Aib‐γ⁴(R)Ile]₄‐OMe 1 and Boc‐[Aib‐γ⁴(R)Ile]₅‐OMe 2 are described. Peptides 1 and 2 adopt C₁₂‐helical conformations in crystals. The structure of octapeptide 1 is stabilized by six intramolecular 4 → 1 hydrogen bonds, forming 12 atom C₁₂ motifs. The structure of peptide 2 reveals the formation of eight successive C₁₂ hydrogen‐bonded turns. Average backbone dihedral angles for αγ C₁₂ helices are peptide 1 , Aib; φ (°) = ?57.2 ± 0.8, ψ (°) = ?44.5 ± 4.7; γ⁴(R)Ile; φ (°) = ?127.3 ± 7.3, θ₁ (°) = 58.5 ± 12.1, θ₂ (°) = 67.6 ± 10.1, ψ (°) = ?126.2 ± 16.1; peptide 2 , Aib; φ (°) = ?58.8 ± 5.1, ψ (°) = ?40.3 ± 5.5; ψ⁴(R)Ile; φ (°) = ?123.9 ± 2.7, θ₁ (°) = 53.3 θ 4.9, θ ₂ (°) = 61.2 ± 1.6, ψ (°) = ?121.8 ± 5.1. The tendency of γ⁴‐substituted residues to adopt gauche–gauche conformations about the C^α–C^β and C^β–C^γ bonds facilitates helical folding. The αγ C₁₂ helix is a backbone expanded analog of α peptide 3₁₀ helix. The hydrogen bond parameters for α peptide 3₁₀ and α‐helices are compared with those for αγ hybrid C₁₂ helix. Copyright © 2016 European Peptide Society and John Wiley & Sons.