Complete disproportionation of duplex poly(dT)*poly(dA) into triplex poly(dT)*poly(dA)*poly(dT) and poly(dA) by coralyne

Coralyne is a small crescent-shaped molecule known to intercalate duplex and triplex DNA. We report that coralyne can cause the complete and irreversible disproportionation of duplex poly(dT)·poly(dA). That is, coralyne causes the strands of duplex poly(dT)·poly(dA) to repartition into equal molar equivalents of triplex poly(dT)·poly(dA)·poly(dT) and poly(dA). Poly(dT)·poly(dA) will remain as a duplex for months after the addition of coralyne, if the sample is maintained at 4°C. However, disproportionation readily occurs upon heating above 35°C and is not reversed by subsequent cooling. A titration of poly(dT)·poly(dA) with coralyne reveals that disproportionation is favored by as little as one molar equivalent of coralyne per eight base pairs of initial duplex. We have also found that poly(dA) forms a self-structure in the presence of coralyne with a melting temperature of 47°C, for the conditions of our study. This poly(dA) self-structure binds coralyne with an affinity that is comparable with that of triplex poly(dT)·poly(dA)·poly(dT). A Job plot analysis reveals that the maximum level of poly(dA) self-structure intercalation is 0.25 coralyne molecules per adenine base. This conforms to the nearest neighbor exclusion principle for a poly(dA) duplex structure with A·A base pairs. We propose that duplex disproportionation by coralyne is promoted by both the triplex and the poly(dA) self-structure having binding constants for coralyne that are greater than that of duplex poly(dT)·poly(dA).     

New aspects of the interaction of the antibiotic coralyne with RNA: coralyne induces triple helix formation in poly(rA)?poly(rU)

The interaction of coralyne with poly(A)•poly(U), poly(A)•2poly(U), poly(A) and poly(A)•poly(A) is analysed using spectrophotometric, spectrofluorometric, circular dichroism (CD), viscometric, stopped-flow and temperature-jump techniques. It is shown for the first time that coralyne induces disproportionation of poly(A)•poly(U) to triplex poly(A)•2poly(U) and single-stranded poly(A) under suitable values of the [dye]/[polymer] ratio (C_D/C_P). Kinetic, CD and spectrofluorometric experiments reveal that this process requires that coralyne (D) binds to duplex. The resulting complex (AUD) reacts with free duplex giving triplex (UAUD) and free poly(A); moreover, ligand exchange between duplex and triplex occurs. A reaction mechanism is proposed and the reaction parameters are evaluated. For C_D/C_P> 0.8 poly(A)•poly(U) does not disproportionate at 25°C and dye intercalation into AU to give AUD is the only observed process. Melting experiments as well show that coralyne induces the duplex disproportionation. Effects of temperature, ionic strength and ethanol content are investigated. One concludes that triplex formation requires coralyne be only partially intercalated into AUD. Under suitable concentration conditions, this feature favours the interaction of free AU with AUD to give the AUDAU intermediate which evolves into triplex UAUD and single-stranded poly(A). Duplex poly(A)•poly(A) undergoes aggregation as well, but only at much higher polymer concentrations compared to poly(A)•poly(U).     

Determination of base and backbone contributions to the thermodynamics of premelting and melting transitions in B DNA

In previous papers of this series the temperature-dependent Raman spectra of poly(dA)·poly(dT) and poly(dA–dT)·poly(dA–dT) were used to characterize structurally the melting and premelting transitions in DNAs containing consecutive A·T and alternating A·T/T·A base pairs. Here, we describe procedures for obtaining thermodynamic parameters from the Raman data. The method exploits base-specific and backbone-specific Raman markers to determine separate thermodynamic contributions of A, T and deoxyribosyl-phosphate moieties to premelting and melting transitions. Key findings include the following: (i) Both poly(dA)·poly(dT) and poly(dA–dT)· poly(dA–dT) exhibit robust premelting transitions, due predominantly to backbone conformational changes. (ii) The significant van’t Hoff premelting enthalpies of poly(dA)·poly(dT) [ΔH_vH^pm = 18.0 ± 1.6 kcal·mol^–1 (kilocalories per mole cooperative unit)] and poly(dA–dT)·poly(dA–dT) (ΔH_vH^pm = 13.4 ± 2.5 kcal·mol^–1) differ by an amount (~4.6 kcal·mol^–1) estimated as the contribution from three-centered inter-base hydrogen bonding in (dA)_n·(dT)_n tracts. (iii) The overall stacking free energy of poly(dA)· poly(dT) [–6.88 kcal·mol_bp^–1 (kilocalories per mole base pair)] is greater than that of poly(dA–dT)· poly(dA–dT) (–6.31 kcal·mol_bp^–1). (iv) The difference between stacking free energies of A and T is significant in poly(dA)·poly(dT) (ΔΔG_st = 0.8 ± 0.3 kcal· mol_bp^–1), but marginal in poly(dA–dT)·poly(dA–dT) (ΔΔG_st = 0.3 ± 0.3 kcal·mol_bp^–1). (v) In poly(dA)· poly(dT), the van’t Hoff parameters for melting of A (ΔH_vH^A = 407 ± 23 kcal·mol^–1, ΔS_vH^A = 1166 ± 67 cal·°K^–1·mol^–1, ΔG_vH(25°C)^A = 60.0 ± 3.2 kcal·mol^–1) are clearly distinguished from those of T (ΔH_vH^T = 185 ± 38 kcal·mol^–1, ΔS_vH^T = 516 ± 109 cal·°K^–1·mol^–1, ΔG_vH(25°C)^T = 27.1 ± 5.5 kcal·mol^–1). (vi) Similar relative differences are observed in poly(dA–dT)· poly(dA–dT) (ΔH_vH^A = 333 ± 54 kcal·mol^–1, ΔS_vH^A = 961 ± 157 cal·°K^–1·mol^–1, ΔG_vH(25°C)^A = 45.0 ± 7.6 kcal· mol^–1; ΔH_vH^T = 213 ± 30 kcal·mol^–1, ΔS_vH^T = 617 ± 86 cal·°K^–1·mol^–1, ΔG_vH(25°C)^T = 29.3 ± 4.9 kcal·mol^–1). The methodology employed here distinguishes thermodynamic contributions of base stacking, base pairing and backbone conformational ordering in the molecular mechanism of double-helical B DNA formation.     

Protoberberine Alkaloids Berberine,Palmatine, and Coralyne Binding to Poly(dT)⋅(Poly(dA)⋅Poly(dT)) Triplex: Comparative Structural Aspects and Energetics Profiles of the Interaction

The interaction of bioactive protoberberine alkaloids berberine, palmatine, and coralyne with the DNA triplex poly(dT)⋅(poly(dA)⋅poly(dT)) was studied using biophysical and calorimetric techniques. All three alkaloids bound the triplex cooperatively. Berberine and palmatine predominantly stabilized the triplex structure, while coralyne stabilized both triplex and duplex structures as inferred from optical thermal melting profiles. Fluorescence quenching, polarization, and viscometric studies hinted at an intercalative mode of binding for the alkaloids to the triplex, coralyne being more strongly intercalated compared to partial intercalation of berberine and palmatine. The overall affinity of coralyne was two order higher (2.29×10⁷ M ⁻¹) than that of berberine (3.43×10⁵ M ⁻¹) and palmatine (2.34×10⁵ M ⁻¹). Isothermal titration calorimetric studies revealed that the binding to the triplex was favored by negative enthalpy change (ΔH=−3.34 kcal/mol) with favorable entropy contribution (TΔS = 4.07 kcal/mol) for berberine, favored by almost equal negative enthalpy (ΔH =−3.88 kcal/mol) and entropy changes (TΔS = 3.37 kcal/mol) for palmatine, but driven by large enthalpy contributions (ΔH =−25.62 kcal/mol and TΔS =−15.21 kcal/mol) for coralyne. These results provide new insights on the binding of isoquinoline alkaloids to the DNA triplex structure.     

Triplex inducer-directed self-assembly of single-walled carbon nanotubes: a triplex DNA-based approach for controlled manipulation of nanostructures

As a promising strategy for artificially control of gene expression, reversible assembly of nanomaterials and DNA nanomachine, DNA triplex formation has received much attention. Carbon nanotubes as gene and drug delivery vector or as 'building blocks' in nano/microelectronic devices have been successfully explored. Therefore, studies on triplex DNA-based carbon nanotube hybrid materials are important for development of smart nanomaterials and for gene therapy. In this report, a small molecule directed single-walled carbon nanotubes (SWNTs) self-assembly assay has been developed by disproportionation of SWNTs-dT(22)·dA(22) duplex into triplex dT(22)·dA(22)·dT(22) and dA(22) by a triplex formation inducer, coralyne. This has been studied by circular dichroism, light scattering (LS) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), electrophoretic mobility shift assay and supported by using DNA random sequence. In contrast, SWNTs do not aggregate under the same experimental conditions when the small molecules used can not induce dT(22)·dA(22)·dT(22) triplex formation. Therefore, this novel small molecule-directed SWNTs self-assembly assay has also been used for screening of triplex inducers in our studies.     

Molecular dynamics simulations and coupled nucleotide substitution experiments indicate the nature of A·A base pairing and a putative structure of the coralyne-induced homo-adenine duplex

Coralyne is an alkaloid drug that binds homo-adenine DNA (and RNA) oligonucleotides more tightly than it does Watson–Crick DNA. Hud’s laboratory has shown that poly(dA) in the presence of coralyne forms an anti-parallel duplex, however attempts to determine the structure by NMR spectroscopy and X-ray crystallography have been unsuccessful. Assuming adenine–adenine hydrogen bonding between the two poly(dA) strands, we constructed 40 hypothetical homo-(dA) anti-parallel duplexes and docked coralyne into the six most favorable duplex structures. The two most stable structures had trans glycosidic bonds, but distinct pairing geometries, i.e. either Watson–Crick Hoogsteen (transWH) or Watson–Crick Watson–Crick (transWW) with stability of transWH > transWW. To narrow down the possibilities, 7-deaza adenine base substitutions (dA→7) were engineered into homo-(dA) sequences. These substitutions significantly reduced the thermal stability of the coralyne-induced homo-(dA) structure. These experiments strongly suggest the involvement of N7 in the coralyne-induced A·A base pairs. Moreover, due to the differential effect on melting as a function of the location of the dA→7 mutations, these results are consistent with the N1–N7 base pairing of the transWH pairs. Together, the simulation and base substitution experiments predict that the coralyne-induced homo-(dA) duplex structure adopts the transWH geometry.     

Characterization of a Baculovirus-Encoded ATP-Dependent DNA Ligase

Sequence analysis of the Lymantria dispar multicapsid nucleopolyhedrovirus (LdMNPV) genome identified an open reading frame (ORF) encoding a 548-amino-acid (62-kDa) protein that showed 35% amino acid sequence identity with vaccinia virus ATP-dependent DNA ligase. Ligase homologs have not been reported from other baculoviruses. The ligase ORF was cloned and expressed as an N-terminal histidine-tagged fusion protein. Incubation of the purified protein with [α-³²P]ATP resulted in formation of a covalent enzyme-adenylate intermediate which ran as a 62-kDa labeled band on a sodium dodecyl sulfate-polyacrylamide gel. Loss of the radiolabeled band occurred upon incubation of the intermediate with pyrophosphate, poly(dA) · poly(dT)_12–18, or poly(rA) · poly(dT)_12–18, characteristics of a DNA ligase II or III. The protein was able to ligate a double-stranded synthetic DNA substrate containing a single nick and inefficiently ligated a 1-nucleotide (nt) gap but did not ligate a 2-nt gap. It was able to ligate short, complementary overhangs but not blunt-ended double-stranded DNA. In a transient DNA replication assay employing six plasmids containing the LdMNPV homologs of the essential baculovirus replication genes, a plasmid containing the DNA ligase gene was neither essential nor stimulatory. All of these results are consistent with the activity of type III DNA ligases, which have been implicated in DNA repair and recombination.     

Conformation dependent binding of netropsin and distamycin to DNA and DNA model polymers

The binding of the antibiotics netropsin and distamycin A to DNA has been studied by thermal melting, CD and sedimentation analysis. Netropsin binds strongly at antibiotic/nucleotide ratios up to at least 0.05. CD spectra obtained using DNA model polymers reveal that netropsin binds tightly to poly (dA) · poly (dT), poly (dA-dT) · poly(dA-dT) and poly (dI-dC) · poly (dI-dC) but poorly, if at all, to poly (dG) · poly (dC). Binding curves obtained with calf thymus DNA reveal one netropsin-binding site per 6.0 nucleotides (K_a=2.9 · 10⁵ M⁻¹); corresponding values for distamycin A are one site per 6.1 nucleotides with K_a= 11.6 · 10⁵ M⁻¹. Binding sites apparently involve predominantly A·T-rich sequences whose specific conformation determines their high affinity for the two antibiotics. It is suggested that the binding is stabilized primarily by hydrogen bonding and electrostatic interactions probably in the narrow groove of the DNA helix, but without intercalation. Any local structural deformation of the helix does not involve unwinding greater than approximately 3° per bound antibiotic molecule.     

Molecular recognition of poly(A) by small ligands: an alternative method of analysis reveals nanomolar, cooperative and shape-selective binding

A few drug-like molecules have recently been found to bind poly(A) and induce a stable secondary structure (T_m ≈ 60°C), even though this RNA homopolymer is single-stranded in the absence of a ligand. Here, we report results from experiments specifically designed to explore the association of small molecules with poly(A). We demonstrate that coralyne, the first small molecule discovered to bind poly(dA), binds with unexpectedly high affinity (K_a >10⁷ M⁻¹), and that the crescent shape of coralyne appears necessary for poly(A) binding. We also show that the binding of similar ligands to poly(A) can be highly cooperative. For one particular ligand, at least six ligand molecules are required to stabilize the poly(A) self-structure at room temperature. This highly cooperative binding produces very sharp transitions between unstructured and structured poly(A) as a function of ligand concentration. Given the fact that junctions between Watson–Crick and A·A duplexes are tolerated, we propose that poly(A) sequence elements and appropriate ligands could be used to reversibly drive transitions in DNA and RNA-based molecular structures by simply diluting/concentrating a sample about the poly(A)-ligand ‘critical concentration’. The ligands described here may also find biological or medicinal applications, owing to the 3′-polyadenylation of mRNA in living cells.     

Binding of ethidium bromide to a DNA triple helix. Evidence for intercalation

The interaction of ethidium, a DNA intercalator, with the poly(dA).poly(dT) duplex and the poly (dA).2poly(dT) triplex has been investigated by a variety of spectrophotometric and hydrodynamic techniques. The fluorescence of ethidium is increased when either the duplex or triplex form is present. Binding constants, determined from absorbance measurements, indicate that binding to the triple helical form is substantially stronger than to the duplex, with a larger binding site size (2.8 base triplets compared to 2.4 base pairs). Furthermore, while binding to poly(dA).poly(dT) shows strong positive cooperativity, binding to the triplex is noncooperative. Thermal denaturation experiments demonstrate that ethidium stabilizes the triple helix. Binding to either form induces a weak circular dichroism band in the visible wavelength region, while in the region around 310 nm, there is a band that is strongly dependent on the degree of saturation of the duplex, and which is positive for the duplex but negative for the triplex. Both fluorescence energy transfer and quenching studies provide evidence of intercalation of ethidium in both duplex and triplex complexes. Binding of ethidium leads to an initial decrease in viscosity for both the duplex and triplex structures, followed by an increase, which is greater for the duplex. Taken together, these results strongly suggest that ethidium binds to the poly (dA).2poly(dT) triple helix via an intercalative mechanism.     

Different Effects of Nonintercalative Antitumor Drugs on DNA Triple Helix Stability: SN-18071 Promotes Triple Helix Formation

Abstract

The interaction of the nonintercalating bisquaternary ammonium heterocyclic drugs SN- 18071 and SN-6999 with a DNA triple helix has been studied using thermal denaturation and CD spectroscopy. Our data show, that both minor groove binders can bind to the triple helix of poly(dA)-2poly(dT) under comparable ionic conditions, but they influence the stability of the triplex relative to the duplex structure of poly(dA)-poly(dT) in a different manner. SN- 18071, a ligand devoid of forming hydrogen bonds, can promote triplex formation and thermally stabilizes it up to 500 mM Na+ concentration. SN-6999 destabilizes the triplex to duplex equibilirium whereas it stabilizes the duplex. The binding constant of SN-18071 is found to be greater than that to the duplex. The stabilizing effect of SN-18071 is explained by electrostatic inetractions of three ligand molecules with the three grooves of the triple stranded structure. From the experiments it is concluded that SN-6999 binds to the triplex minor groove thereby destabilizing the triplex similar as previously reported for netropsin.     

(dA·dT)-dependent inactivation of the DNA template properties by interaction with netropsin and distamycin A

The inhibitory effect of the polypeptide antibiotics netropsin and distamycin A on DNA dependent nucleic acid synthesis has been shown to be related to the base composition of the template DNA. A number of natural DNA's of quite different dA·dT content as well as poly (dI-dC)·poly (dI-dC), poly (dA-dT)·poly (dA-dT), poly (dA) · poly (dT) and poly (dG)·poly(dC) has been studied as templates in DNA and in part in RNA polymerase reaction. The highest binding efficiency of netropsin existing for (dA·dT)-containing DNA polymers and the less pronounced interaction with the (dI·dC)-containing polymer shown by the melting and CD spectral behaviour of the complexes are entirely reflected in the template inactivation. The same is evident for distamycin A. However, in contrast to netropsin the antibiotic distamycin A exhibits some binding tendency to poly (dG)·poly (dC). Binding effects of a netropsin derivative to DNA and (dA·dT)-containing polymers suggest the importance of hydrogen bonds of the peptide groups in the complex formation.     

M-DNA is stabilised in G*C tracts or by incorporation of 5-fluorouracil

M-DNA is a complex between the divalent metal ions Zn²⁺, Ni²⁺ and Co²⁺ and duplex DNA which forms at a pH of ~8.5. The stability and formation of M-DNA was monitored with an ethidium fluorescence assay in order to assess the relationship between pH, metal ion concentration, DNA concentration and the base composition. The dismutation of calf thymus DNA exhibits hysteresis with the formation of M-DNA occurring at a higher pH than the reconversion of M-DNA back to B-DNA. Hysteresis is most prominent with the Ni form of M-DNA where complete reconversion to B-DNA takes several hours even in the presence of EDTA. Increasing the DNA concentration leads to an increase in the metal ion concentration required for M-DNA formation. Both poly(dG)•poly(dC) and poly(dA)•poly(dT) formed M-DNA more readily than the corresponding mixed sequence DNAs. For poly(dG)•(poly(dC) M-DNA formation was observed at pH 7.4 with 0.5 mM ZnCl₂. Modified bases were incorporated into a 500 bp fragment of phage λ DNA by polymerase chain reaction. DNAs in which guanine was replaced with hypoxanthine or thymine with 5-fluorouracil formed M-DNA at pHs below 8 whereas substitutions such as 2-aminoadenine and 5-methylcytosine had little effect. Poly[d(A5FU)] also formed a very stable M-DNA duplex as judged from T_m measurements. It is evident that the lower the pK_a of the imino proton of the base, the lower the pH at which M-DNA will form; a finding that is consistent with the replacement of the imino proton with the metal ion.     

Mg2+-induced triplex formation of an equimolar mixture of poly(rA) and poly(rU)

Magnesium ions strongly influence the structure and biochemical activity of RNA. The interaction of Mg²⁺ with an equimolar mixture of poly(rA) and poly(rU) has been investigated by UV spectroscopy, isothermal titration calorimetry, ultrasound velocimetry and densimetry. Measurements in dilute aqueous solutions at 20°C revealed two differ ent processes: (i) Mg²⁺ binding to unfolded poly(rA)·poly(rU) up to [Mg²⁺]/[phosphate] = 0.25; and (ii) poly(rA)·2poly(rU) triplex formation at [Mg²⁺]/[phosphate] between 0.25 and 0.5. The enthalpies of these two different processes are favorable and similar to each other, ~–1.6 kcal mol^–1 of base pairs. Volume and compressibility effects of the first process are positive, 8 cm³ mol^–1 and 24 × 10^–4 cm³ mol^–1 bar^–1, respectively, and correspond to the release of water molecules from the hydration shells of Mg²⁺ and the polynucleotides. The triplex formation is also accompanied by a positive change in compressibility, 14 × 10^–4 cm³ mol^–1 bar^–1, but only a small change in volume, 1 cm³ mol^–1. A phase diagram has been constructed from the melting experiments of poly(rA)·poly(rU) at a constant K⁺ concentration, 140 mM, and various amounts of Mg²⁺. Three discrete regions were observed, corresponding to single-, double- and triple-stranded complexes. The phase boundary corresponding to the transition between double and triple helical conformations lies near physiological salt concentrations and temperature.     

Interaction of methyl green with an oligonucleotide in intramolecular duplex and triplex conformations

Interaction of methyl green with the oligonucleotide 5′-dGGAAAAGG-[T₄]-GGAAAAGG-[T₄]-CCTTTTCC (where [T₄] is a nucleotide sequence of four thymines) in hairpin duplex and in intramolecular triplex structures has been studied by circular dichroism. We found that methyl green binding to the duplex form shows a complex pattern, exhibiting an exciton contribution when the number of bound molecules increases. Differences between this pattern and previously published results on other DNAs reveals the presence of different types of complexes. In contrast to previous findings with the triple helix poly(dA).2poly(dT) we show that the methyl green is not totally excluded from this triplex structure made of Pur:Pur:Pyr triplets. Received: 15 July 1997 / Accepted: 22 September 1997     

Effect of Ni2+ and Cd2+ ions on thermally induced conformational transitions in poly(dA)-poly(dT) system

Effects of Ni²⁺ and Cd²⁺ ions on thermally induced conformational transitions in the poly(dA)·poly(dT) polynucleotide duplex and poly(dA)·2poly(dT) triplex under near physiological ionic conditions were studied by measurement of UV absorption melting curves and static light scattering intensity. The diagrams of conformational transitions in poly(dA)-poly(dT)-Me²⁺ systems were plotted. An aggregation in these polynucleotide systems arises at certain values of the metal ions concentration and the temperature after the polymer dissociation into single strands. The phenomenon is conditioned by the aggregation of poly(dA) via the interstrand cross-linking by the dication bridges. Unlike Ni²⁺, Cd²⁺ induces formation of very stable aggregates which did not disintegrate even upon cooling up to room temperature.     

Pyrazolo[3,4-d]pyrimidine nucleic acids: adjustment of dA-dT to dG-dC base pair stability

Oligonucleotides incorporating 8-aza-7-deazapurin-2,6-diamine (pyrazolo[3,4-d]pyrimidin-4,6-diamine) nucleoside 2a or its 7-bromo derivative 2b show enhanced duplex stability compared to those containing dA. While incorporation of 2a opposite dT increases the T_m value only slightly, the 7-bromo compound 2b forms a very stable base pair which is as strong as the dG-dC pair. Compound 2b shows a similar base discrimination in duplex DNA as dA. The base-modified nucleosides 2a,b have a significantly more stable N-glycosylic bond than the rather labile purin-2,6-diamine 2′-deoxyribonucleoside 1. Base protection with acyl groups, with which we had difficulties in the case of purine nucleoside 1, was effective with pyrazolo[3,4-d]-pyrimidine nucleosides 2a,b. Oligonucleotides containing 2a,b were obtained by solid phase synthesis employing phosphoramidite chemistry. Compound 2b harmonizes the stability of DNA duplexes. Their stability is no longer dependent on the base pair composition while they still maintain their sequence specificity. Thus, they have the potential to reduce the number of mispairs when hybridized in solution or immobilized on arrays.     

Investigation of DNA Binding Modes for a Symmetrical Cyanine Dye Trication: Effect of DNA Sequence and Structure

Abstract

The DNA binding behavior of a tricationic cyanine dye (DiSC₃₊(5)) was studied using the [Poly(dA-dT)]₂, [Poly(dI-dC)]₂ and Poly(dA)?Poly(dT) duplex sequences and the Poly(dA) ?2Poly(dT) triplex. Optical spectroscopy and viscometry results indicate that the dye binds to the triplex structure by intercalation, to the nonalternating Poly(dA)?Poly(dT) duplex through minor groove binding and to the alternating [Poly(dA-dT)]₂ duplex by a combination of two binding modes: intercalation at low concentration and dimerization within the minor groove at higher concentration. Dimerization occurs at lower dye concentrations for the [Poly(dI-dC)]₂ sequence, consistent with our previous investigations on an analogous monocationic cyanine dye. [Seifert, J.L., et al. (1999) J. Am. Chem. Soc. 121, 2987–2995] These studies illustrate the diversity of DNA binding modes that are available to a given ligand structure.     

Interaction of 9-O-(ω-amino) alkyl ether berberine analogs with poly(dT)·poly(dA)*poly(dT) triplex and poly(dA)·poly(dT) duplex: a comparative study

Isoquinoline alkaloids and their analogs represent an important class of molecules for their broad range of clinical and pharmacological utility. These compounds are of current interest owing to their low toxicity and excellent chemo preventive properties. These alkaloids can play important role in stabilising the nucleic acid triple helices. The present study has focused on the interaction of five 9-O-(ω-amino) alkyl ether berberine analogs with the DNA triplex poly(dT)·poly(dA)*poly(dT) and the parent duplex poly(dA)·poly(dT) studied using various biophysical techniques. Scatchard analysis of the spectral data indicated that the analogs bind both to the duplex and triplex in a non-cooperative manner in contrast to the cooperative binding of berberine to the DNA triplex. Strong intercalative binding to the DNA triplex structure was revealed from ferrocyanide quenching, fluorescence polarization and viscosity results. Thermal melting studies demonstrated higher stabilization of the Hoogsteen base paired third strand of the DNA triplex compared to the Watson–Crick strand. Circular dichroism studies suggested a stronger perturbation of the DNA triplex conformation by the alkaloid analogs compared to the duplex. The binding was entropy-driven in each case and the entropy contribution to free energy increased as the length of the alkyl side chain increased. The analogs exhibited stronger binding affinity to the triple helical structure compared to the parent double helical structure.     

Binding geometries of triple helix selective benzopyrido [4,3-b]indole ligands complexed with double- and triple-helical polynucleotides

The binding modes of three benzopyrido [4,3-b]indole derivatives (and one benzo[-f]pyrido [4-3b] quinoxaline derivative) with respect to double helical poly(dA) · poly(dT) and poly[d(A-T)]₂ and triple-helical poly(dA) · 2poly(dT) have been investigated using linear dichroism (LD) and CD: (I) 3-methoxy-11-amino-BePI where BePI = (7H-8-methyl-benzo[e]pyrido [4,3-b]indole), (II) 3-methoxy-11-[(3′-amino) propylamino]-BePI, (III) 3-methoxy-7-[(3′-diethylamino)propylamino] BgPI where BgPI = (benzo[g]pyrido[4,3-b]indole), and (IV) 3-methoxy-11-[(3′-amino)propylamino] B f P Q where B f P Q = {benzo[-f]pyrido[4-3b]quinoxaline}. The magnitudes of the reduced LD of the electronic transitions of the polynucleotide bases and of the bound ligands are generally very similar, suggesting an orientation of the plane of the ligands' fused-ring systems preferentially perpendicular to the helix axis. The LD results suggest that all of the ligands are intercalated for all three polynucleotides. The induced CD spectrum of the BePI chromophore in the (II-BePI)-poly[d(A-T)]₂ complex is almost a mirror image of that for the (I-BePI)-poly(dA) · poly(dT) and (I-BePI)-poly(dA) · 2poly(dT) complexes, suggesting an antisymmetric orientation of the BePI moiety upon intercalation in poly[d(A-T)]₂ compared to the other polynucleotides. The induced CD of I-BePI bound to poly(dA) · 2poly(dT) suggests a geometry that is intermediate between that of its other two complexes. The concluded intercalative binding as well as the conformational variations between the different BePI complexes are of interest in relation to the fact that BePI derivatives are triplex stabilizers. © 1997 John Wiley & Sons, Inc. Biopoly 42: 101–111, 1997