Production of maltose and maltotriose from starch and pullulan by a immobilized multienzyme of pullulanase and β-amylase

Pullulanase was immobilized on tannic acid and TEAE-cellulose, and β-amylase was covalently immobilized on p-aminobenzylcellulose. Both the immobilized enzymes showed similar properties in pH and temperature optima and heat stability. On passing the pullulan solution at high temperature (50°C) through a column packed with immobilized pullulanase, only maltotriose was obtained for ten days and the half-life was about 15 days. In a continuous reaction using immobilized multienzyme, starch was completely converted into maltose at 50°C and at a space velocity of 1.2, a comparative longer half-life (20 days) was obtained. It was concluded that starch was smoothly converted into maltose with the aid of α-amylase contaminated in the immobilized pullulanase and the operational stability of the column increased with 2-5mM Ca²⁺.     

Purifications and Enzymatic Properties of β-Amylase and Pullulanase from Bacillus cereus var. mycoides

A β-amylase and a pullulanase produced by Bacillus cereus var. mycoides were purified by means of ammonium sulfate fractionation, adsorption on starch and celite and Sephadex G–100 column chromatography. The purified enzymes were homogeneous in disc electrophoresis.

The β-amylase released only maltose from amylose, amylopectin, starch and glycogen, and the released maltose was in β-form. The pullulanase released maltose, maltotriose and maltotetraose from β-limit dextrin and maltotriose from pullulan, but not amylose-like substance from amylopectin.

The optimum pHs of β-amylase and pullulanase were about 7 and 6~6.5, respectively. The optimum temperatures of the enzymes were about 50°C. The enzymes were inhibited by the sulfhydryl reagents such as mercuric chloride and p-chloromercuribenzoate, and the inhibitions with p-chloromercuribenzoate were restored by the addition of cysteine. The molecular weights of β-amylase and pullulanase were estimated to be 35,000±5,000 and 110,000±20,000, respectively.     

Purification and properties of starch hydrolyzing enzymes in mature roots of sugar beets

Mature roots of sugar beets, which accumulate large amounts of sucrose but not starch, nevertheless contained acid and neutral amylases, judging from their pH optima, as well as pullulanase. Acid and neutral amylases were partially purified by procedures including fractionation with ammonium sulfate, ion exchange column chromatography, and gel filtration. Acid amylase was classified as an exoamylase, since it produced only glucose from soluble starch, amylopectin. β-limit dextrin, and rabbit liver glycogen. Neutral amylase was classified as an endoamylase, since it liberated maltose as the main product plus a small amount of glucose and oligosaccharides, and was capable of hydrolyzing β-limit dextrin. Pullulanase was purified to apparent homogeneity by procedures including fractionation with ammonium sulfate, Diethylaminoethyl-cellulose column chromatography and affinity chromatography. Pullulanase was capable of hydrolyzing soluble starch, amylopectin, β-limit-dextrin, and pullulan. Debranching of amylopectin was further evident by an increase in extinction coefficient, and by a shift of λ_max from 530 to 560 nm when the debranched amylopectin formed a complex with I₂-KI.     

PURIFICATION AND CHARACTERIZATION OF PULLULANASE FROM Lactococcus lactis

This paper describes a simple and efficient method of isolation of a plullulanase type I from amylolytic lactic acid bacteria (ALAB). Extracellular pullulanase type I was purified from a cell-free culture supernatant of Lactococcus lactis IBB 500 by using ammonium sulfate fractionation and dialysis (instead of ultrafiltration), and ion-exchange chromatography with CM Sepharose FF followed by gel filtration chromatography with Sephadex G-150 as the final step. A final purification factor of 14.36 was achieved. The molecular mass of the enzyme was estimated as 73.9 kD. The optimum temperature for the enzyme activity was 45°C and the optimum pH was 4.5. Pullulanase activity was increased by addition Co²⁺ and completely inhibited by Hg²⁺. The enzyme activity was specifically directed toward α-1,6 glycosidic linkages of pullulan giving maltotriose units. Enzymatic hydrolysis of starch and amylose produced a mixture of maltose and maltotriose.     

Purification and characterization of thermostable β-amylase and pullulanase from high-yielding Clostridium thermosulfurogenes SV2

Thermostable β-amylase and pullulanase, secreted by the thermophilic anaerobic bacterium Clostridium thermosulfurogenes strain SV2, were purified by salting out with ammonium sulphate, DEAE-cellulose column chromatography, and gel filtration using Sephadex G-200. Maltose was identified as a major hydrolysis product of starch by β-amylase, and maltotriose was identified as a major hydrolysis product of pullulan by pullulanase. The molecular masses of native β-amylase and pullulanase were determined to be 180 and 100 kDa by gel filtration, and 210 and 80 kDa by SDS–PAGE, respectively. The temperature optima of purified β-amylase and pullulanase were 70 and 75°C, respectively, and both enzymes were completely stable at 70°C for 2h. The presence of starch further increased the stability of both the enzymes to 80°C and both displayed a pH activity optimum of 6.0. The starch hydrolysis products formed by β-amylase action had β-anomeric form.     

Pullulanase from rice endosperm

Pullulanase (EC 3.2.1.41) in non-germinating seeds was compared with that in germinating seeds. Moreover, pullulanase from the endosperm of rice (Oryza sativa L., cv. Hinohikari) seeds was isolated and its properties investigated. The pI value of pullulanase from seeds after 8 days of germination was almost equal to that from non-germinating seeds, which shows that these two enzymes are the same protein. Therefore, the same pullulanase may play roles in both starch synthesis during ripening and starch degradation during germination in rice seeds. The enzyme was isolated by a procedure that included ammonium sulfate fractionation, DEAE-cellulofine column chromatography, preparative isoelectric focusing, and preparative disc gel electrophoresis. The enzyme was homogeneous by SDS/PAGE. The molecular weight of the enzyme was estimated to be 100 000 based on its mobility on SDS/PAGE and 105 000 based on gel filtration with TSKgel super SW 3000, which showed that it was composed of a single unit. The isoelectric point of the enzyme was 4.7. The enzyme was strongly inhibited by beta-cyclodextrin. The enzyme was not activated by thiol reagents such as dithiothreitol, 2-mercaptoethanol or glutathione. The enzyme most preferably hydrolyzed pullulan and liberated only maltotriose. The pullulan hydrolysis was strongly inhibited by the substrate at a concentration higher than 0.1%. The degree of inhibition increased with an increase in the concentration of pullulan. However, the enzyme hydrolyzed amylopectin, soluble starch and beta-limit dextrin more rapidly as their concentrations increased. The enzyme exhibited alpha-glucosyltransfer activity and produced an alpha-1,6-linked compound of two maltotriose molecules from pullulan.     

Purification and characterization of pullulanase from Lactococcus lactis

This paper describes a simple and efficient method of isolation of a plullulanase type I from amylolytic lactic acid bacteria (ALAB). Extracellular pullulanase type I was purified from a cell-free culture supernatant of Lactococcus lactis IBB 500 by using ammonium sulfate fractionation and dialysis (instead of ultrafiltration), and ion-exchange chromatography with CM Sepharose FF followed by gel filtration chromatography with Sephadex G-150 as the final step. A final purification factor of 14.36 was achieved. The molecular mass of the enzyme was estimated as 73.9 kD. The optimum temperature for the enzyme activity was 45°C and the optimum pH was 4.5. Pullulanase activity was increased by addition Co(2+) and completely inhibited by Hg(2+). The enzyme activity was specifically directed toward α-1,6 glycosidic linkages of pullulan giving maltotriose units. Enzymatic hydrolysis of starch and amylose produced a mixture of maltose and maltotriose.     

Pullulanase is a characteristic of manyKlebsiella species and functions in the degradation of starch

Summary The type strainsKlebsiella pneumoniae NCTC 9633,K.ozaenae NCTC 5050 andK.rhinoscleromatis NCTC 5046, representative for all members of the genusKlebsiella, were found to produce pullulanase (pullulan 6-glucanohydrolase, EC 3.2.1.41). In addition, 58 fresh isolates ofKlebsiella sp. of human origin were screened for growth on a defined solid medium with either maltose, maltodextrin mixture, soluble starch, glycogen, or pullulan as the sole carbon source. All of the strains showed luxurious growth on maltose and maltodextrins, seven strains grew poorly or not at all on the polymeric substrates, soluble starch, pullulan or glycogen. Three fresh isolates out of the 51 strains which did grow on each carbon source tested were examined in more detail with respect to a possible involvement of pullulanase in the utilization of -glucans. The production of pullulanase was inducible by growth of the cells on -glucans, whereas cultivation on glycerol, D-glucose or lactose did not lead to enzyme formation. The level of pullulanase activity in the three strains varied under otherwise comparable culture conditions, as did the level of a co-inducible -amylase. Comparative growth experiments on linear or branched -glucans allow the conclusion that the cooperation of hydrolases specific for 1,4--glucosidic linkages (-amylase) and for 1,6--linkages (pullulanase) is an obligatory requirement for the effective utilization of starch and glycogen.     

Improved purification and biochemical characterization of extracellular amylopullulanase from Thermoanaerobacter ethanolicus 39E

A maltose-limited chemostat culture was used to investigate the expression and excretion of amylopullulanase by Thermoanaerobacter ethanolicus 39E (formerly Clostridium thermohydrosulfuricum 39E). In maltose-limited continuous culture, amylopullulanase was produced and secreted at tenfold higher levels than in batch culture. The extracellular amylopullulanase was purified to homonogeneity by using an inhibitor-linked affinity column matrix. The purified amylopullulanase had a specific activity of 480 units (U)/mg protein for pullulanase and 175 U/mg protein for -amylase. -Cyclodextrin inhibited both -amylase and pullulanase activities, with a substrate inhibition constant (K _i) of 0.065 mg/ml.Amylopullulanase had a relative molecular mass (M_r) of 140 000 using sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis and an M_r of 133 000 using gel-filtration chromatography. The N-terminal sequence of the enzyme was Glu-Thr-Asp-Thr-Ala-Pro-Ala. The purified enzyme displayed Michaelis constant (K _m) values of 0.35 mg/ml for pullulan and 1.00 mg/ml for amylose. The enzyme had an isoelectric point (pI) of 4.0, and displayed an optimum pH for stability and activity of 6.2 and 5.5, respectively. The enzyme was stable up to 85° C in the presence of Ca²⁺, and had a half-life of 40 min at 90° C (pH 6.2). Ca²⁺ was required for thermal stability, but not for activity. Amylose, glycogen, and amylopectin were degrade to maltose, maltotriose, and maltotetraose, whereas only maltotriose was formed from pullulan. Correspondence to: J. G. Zeikus     

Purification and properties of a thermoactive and thermostable pullulanase from Thermococcushydrothermalis, a hyperthermophilic archaeon isolated from a deep-sea hydrothermal vent

The extremely thermophilic archaeon Thermococcus hydrothermalis, isolated from a deep-sea hydrothermal vent in the East Pacific Rise at 21°N, produced an extracellular pullulanase. This enzyme was purified 97-fold to homogeneity from cell-free culture supernatant. The purified pullulanase was composed of a single polypeptide chain having an estimated molecular mass of 110 kDa (gel filtration) or 128 kDa (sodium dodecyl sulfate/polyacryl amide gel electrophoresis). The enzyme showed optimum activity at pH 5.5 and 95 °C. The thermostability and the thermoactivity were considerably increased in the presence of Ca²⁺. The enzyme was activated by 2-mercaptoethanol and dithiothreitol, whereas N-bromosuccinimide and α-cyclodextrin were inhibitors. This enzyme was able to hydrolyze, in addition to the α-1,6-glucosidic linkages in pullulan, α-1,4-glucosidic linkages in amylose and soluble starch, and can therefore be classified as a type II pullulanase or an amylopullulanase. The purified enzyme displayed Michaelis constant (K _m) values of 0.95 mg/ml for pullulan and 3.55 mg/ml for soluble starch without calcium and, in the presence of Ca²⁺, 0.25 mg/ml for pullulan and 1.45 mg/ml for soluble starch. Received: 19 November 1997 / Received revision: 9 March 1998 / Accepted: 14 March 1998     

Inter organ comparison of amylases and starch content in mungbean seedlings

During seedling growth of mungbean in dark, depletion of cotyledonary starch is reflected by an increase in starch content of root and shoot. With progress of seedling growth, amylolytic activity increases in all organs i.e. cotyledons, shoots and roots. A rapid turnover of starch in shoots and roots has been proposed. Amylase activity of seedlings was in the order of cotyledons>shoots>roots. Five days after germination (DAG) α-amylase from cotyledons of mungbean seedlings was purified using ammonium sulphate precipitation, DEAE cellulose and sephadex G-150 column chromatography. Phytic acid was a stronger inhibitor of α-amylase than EDTA. Phytic acid, Hg²⁺, Zn²⁺ and Mn²⁺ were non-competitive inhibitors and the corresponding Ki values were 5.0–5.7, 0.36–0.38, 2.6–3.8 and 0.7–0.8 mol·M⁻³. Elution patterns of α-amylases of cotyledons, shoots and roots on sephadex G-100 column showed that cotyledonary α-amylase had a higher molecular mass than that of shoot and root α-amylases which had identical molecular masses. All α-amylases showed the same optimum pH 5.0 whereas optimum temperature was 55 °C for cotyledonary and 45 °C for shoot and root α-amylases. In all these tissues α-amylases were stable to 30 min heat treatment at 50 °C however unlike cereal α-amylases they lost activity at 70 °C. Km for α-amylases from cotyledons, shoots and roots with starch was 1.9, 4.3 and 6.6 mg per cm³, respectively. α-amylase of cotyledons and roots showed activity in reactions with various substrates in the order of starch>amylose>dextrin-I=dextrin-IV>α-cyclodextrin=β-cyclodextrin>amylopectin>pullulan. The shoot α-amylase showed high activity with amylopectin, which was comparable with that obtained with amylose, and the activity with α and β-cyclodextrin was higher in comparison with dextrin-I and IV. The α-amylases from these tissues liberated maltose, maltotriose and higher oligosaccharides from starch. It could be concluded that amylases from different organs of a seedling could have different physical and kinetic properties.     

A novel α-amylase from the cyanobacterium Nostoc sp. PCC 7119

Little information is yet available on the α-amylases of cyanobacteria. Here, the presence of an α-amylase in the cyanobacterium Nostoc sp. PCC 7119 is first demonstrated. A gene (amy1) encoding a cytoplasmic α-amylase (Amy1) protein has been identified, cloned, and overexpressed in Escherichia coli cells. The recombinant protein is a 56.7-kDa monomer, which has been purified to electrophoretic homogeneity by affinity chromatography. The substrate specificity and end product analyses confirm that it is a calcium-dependent α-amylase enzyme, which exhibits its maximum activity at 31°C and at pH between 6.5 and 7.5. The Amy1 protein breaks down mainly starch, is also able to cleave glycogen and dextrin, and exhibits no activity against xylan or pullulan. So the enzyme cannot efficiently attack the maltodextrins with degrees of polymerization below that of maltooctaose. Maltotriose, maltose, and maltotetraose are the major products of the enzymatic reaction with starch as substrate. The enzyme shows a very high turnover number against soluble potato starch (3,420 ± 270 s⁻¹), as compared with other α-amylases reported in the literature. The high catalytic efficiency and relatively low optimum temperature of the Nostoc Amy1 protein make this previously unexplored group of cyanobacterial enzymes of great interest for further physiological studies and industrial applications.     

Thermostable Amylolytic Enzymes from a New Clostridium Isolate

A new Clostridium strain was isolated on starch at 60°C. Starch, pullulan, maltotriose, and maltose induced the synthesis of α-amylase and pullulanase, while glucose, ribose, fructose, and lactose did not. The formation of the amylolytic enzymes was dependent on growth and occurred predominantly in the exponential phase. The enzymes were largely cell bound during growth of the organism with 0.5% starch, but an increase of the starch concentration in the growth medium was accompanied by the excretion of α-amylase and pullulanase into the culture broth; but also by a decrease of total activity. α-Amylase, pullulanase, and α-glucosidase were active in a broad temperature range (40 to 85°C) and displayed temperature optima for activity at 60 to 70°C. During incubation with starch under aerobic conditions at 75°C for 2 h, the activity of both enzymes decreased to only 90 or 80%. The apparent K_m values of α-amylase, pullulanase, and α-glucosidase for their corresponding substrates, starch, pullulan, and maltose were 0.35 mg/ml, 0.63 mg/ml, and 25 mM, respectively.     

General characteristics of thermostable amylopullulanases and amylases from the alkalophilic Bacillus sp. TS-23

An alkalophilic strain of Bacillus sp., designated TS-23, was isolated from a soil sample collected at a hot spring (Tainan, Taiwan). During growth in a medium containing 1% soluble starch as the sole source of carbon, the fermentation broth exhibited both pullulanase and amylase activity. Pullulanase and amylase activities were maximal at 65° C. The pH optima were 8.8 to 9.6 for pullulanase and 7.5 to 9.4 for amylase. Under optimal conditions, a crude preparation hydrolysed pullulan, generating maltotriose as the major product. Strain TS-23 was found to produce five amylases (A_c, A₁, A₂, AP₁, and AP₂), which were visualized by activity staining of proteins that had been separated by native polyacrylamide gel electrophoresis. Both AP₁ and AP₂ had pullulanase activity and A_c, A₁ and A₂ had the ability to adsorb to raw corn-starch. Native corn-starch was partially digested by adsorbed amylases during the course of 12 h at 50° C, with initiation of granular pitting. Further incubation of the reaction mixture resulted in considerable morphological changes in corn-starch granules, and the main soluble products were maltose, maltotriose and higher oligosaccharides.     

Purification and characterization of thermostable β-amylase and pullulanase from high-yielding Clostridium thermosulfurogenes SV2

Thermostable -amylase and pullulanase, secreted by the thermophilic anaerobic bacterium Clostridium thermosulfurogenes strain SV2, were purified by salting out with ammonium sulphate, DEAE-cellulose column chromatography, and gel filtration using Sephadex G-200. Maltose was identified as a major hydrolysis product of starch by -amylase, and maltotriose was identified as a major hydrolysis product of pullulan by pullulanase. The molecular masses of native -amylase and pullulanase were determined to be 180 and 100 kDa by gel filtration, and 210 and 80 kDa by SDS–PAGE, respectively. The temperature optima of purified -amylase and pullulanase were 70 and 75°C, respectively, and both enzymes were completely stable at 70°C for 2h. The presence of starch further increased the stability of both the enzymes to 80°C and both displayed a pH activity optimum of 6.0. The starch hydrolysis products formed by -amylase action had -anomeric form.     

Cloning of the thermostable α-amylase gene from Pyrococcus woesei in Escherichia coli

Pyrococcus woesei (DSM 3773) α-amylase gene was cloned into pET21d(+) and pYTB2 plasmids, and the pET21d(+)α-amyl and pYTB2α-amyl vectors obtained were used for expression of thermostable α-amylase or fusion of α-amylase and intein in Escherichia coli BL21(DE3) or BL21(DE3)pLysS cells, respectively. As compared with other expression systems, the synthesis of α-amylase in fusion with intein in E. coli BL21(DE3)pLysS strain led to a lower level of inclusion bodies formation—they exhibit only 35% of total cell activity—and high productivity of the soluble enzyme form (195,000 U/L of the growth medium). The thermostable α-amylase can be purified free of most of the bacterial protein and released from fusion with intein by heat treatment at about 75°C in the presence of thiol compounds. The recombinant enzyme has maximal activity at pH 5.6 and 95°C. The half-life of this preparation in 0.05 M acetate buffer (pH 5.6) at 90°C and 110°C was 11 h and 3.5 h, respectively, and retained 24% of residual activity following incubation for 2 h at 120°C. Maltose was the main end product of starch hydrolysis catalyzed by this α-amylase. However, small amounts of glucose and some residual unconverted oligosaccharides were also detected. Furthermore, this enzyme shows remarkable activity toward glycogen (49.9% of the value determined for starch hydrolysis) but not toward pullulan.     

Purification and preliminary characterization of an extracellular pullulanase from Thermoanaerobium Tok6-B1

Summary Extracellular pullulanase (pullulan 6-glucanohydrolase, EC 3.2.1.41) was purified from cell free culture supernatants of Thermoanaerobium Tok6-B1 by ammonium sulphate precipitation, affinity precipitation, gel exclusion and ion exchange chromatography. A final purification factor of over 1600 was achieved. A molecular weight of 120 kD was determined by steric exclusion HPLC. Enzyme activity was specifically directed towards the 1–6 glucosidic linkages of pullulan resulting in 100% conversion to maltotriose and also possessed activity towards 1–4 linkages of starch, amylopectin and amylose producing maltooligosaccharides (DP2-DP4) as products. Maltotetraose was slowly hydrolysed to maltose. Values of K _m (% w/v) were 7.3×10^-3 for pullulan, 2.7×10^-3 for amylopectin and 4.7×10^-3 for Lintner's starch. Pullulanase activity was resistant to 6 M urea and was thermostable at temperatures up to 80°C (t _1/2 in the order of hours). Above 80°C thermal denaturation was significant (t _1/2=17 min at 85°C; 5 min at 90°C) but became less so in the presence of substrate (pullulan or starch). Thermostability was greatest at the pH activity optimum (pH 5.5) and was promoted by Ca²⁺ ions.Abbreviations BSA bovine serum albumin - EDTA ethylenediamine tetracetic acid - HPLC high performance liquid chromatography - MES 2-[N-Morpholino] ethanesulphonic acid - MOPS 3-[N-Morpholino] propanesulphonic acid - Tris tris-(hydroxymethyl)methylamine     

Biosynthesis and hyper production of pullulan by a newly isolated strain of Aspergillus japonicus-VIT-SB1

The main focus of this study was to screen and characterize novel microbial strains isolated from culinary leaf samples, capable of producing high concentrations of pullulan. Hundred isolates were screened from the phylloplane of different plants. The results revealed that eight strains had the capability to produce exopolysaccharide (EPS) and only one potential strain (designated as VIT-SB1) could produce the significant amount of EPS (3.9 ± 0.02 %) on the 6th day of the fermentation without optimisation. The EPS synthesized by VIT-SB1 strain was confirmed to be pullulan on the basis of the results of FT-IR, HPLC and the enzymatic (Pullulanase) analysis. More than 91 % hydrolysis of pullulan by pullulanase enzyme also indicated the presence of α (1 → 6) glycosidic linkages of α (1 → 4) linked maltotriose units. This VIT-SB1 strain was identified as Aspergillus japonicus based on the nucleotide sequence of the D1/D2 domain of Large-Subunit rRNA gene. The sequence was submitted to the GenBank Nucleotide sequence database with Accession No: KC128815. This study has confirmed that pullulan production capacity of this novel strain and Aureobasidium pullulans are comparable. Hence Aspergillus japonicus-VIT-SB1 strain can be commercially exploited as a potential pullulan producing strain.     

Structural Uniformity of Pullulan Produced by Several Strains of Pullularia pullulans

Extracellular polysaccharides produced by 3 strains of Pullularia pullulans were fractionated by treating with cetyl trimethyl ammonium hydroxide into soluble and insoluble fractions, and the structure of the former fraction, i.e., pullulan, was studied. The yield and the ratio of 2 fractions varied widely according to the strains. But the structure of pullulan was found to be uniform irrespective of the strains used. All 3 samples of pullulan gave only glucose on complete acid hydrolysis, and 93~95% maltotriose and 5~7% maltotetraose after isoamylase (pullulanase) action. The ratio of α-1,4- to α-1,6-glucosidic linkages calculated from periodate oxidation data coincided very well with the value expected from the ratio of maltotriose to maltotetraose units. An evidence for the complete absence of branch structure in pullulan was presented from the results of hydrolysis by pullulan 4-glucanohydrolase.