Overlap hybridization screening: isolation and characterization of overlapping DNA fragments surrounding the leu2 gene on yeast chromosome III.

A set of four plasmids containing overlapping segments comprising a total of about 30 kbp of cloned DNA from chromosome III of yeast (Saccharomyces cerevisiae) has been isolated and characterized by restriction endonuclease analyses and DNA:DNA hybridizations. Colony hybridization was carried out with labeled pYe(leu2)10, a plasmid carrying the yeast leu2 gene, to a bank of bacterial colonies containing recombinant plasmids constructed from the vector ColE1 and random fragments of yeast DNA. This resulted in the detection of two plasmids, pYe11G4 and pYe40C3, with DNA inserts which partially overlap the original cloned segment and contain additional DNA extending in opposite directions on the chromosome. By carrying out a second round of colony hybridization with pYe40C3, the cloned region was further extended in one direction. A region of DNA that is repeated at least ten times in the yeast genome was identified by hybridization of pYe11G4 to an EcoRI digest of total yeast DNA. The procedure described in this paper should allow the isolation of large sections of chromosomes, including non-transcribed regions, surrounding cloned genes.     

Copy number control by a yeast centromere

Plasmids containing a cloned yeast (Saccharomyces cerevisiae) centromere (CEN3) in combination with a suitable DNA replication system are maintained in yeast at the low copy number typical of a chromosome. In composite plasmids containing CEN3 plus the yeast 2 mu plasmid, the CEN3 copy number control is dominant over the amplification system that normally drives the 2 mu plasmids to high copy number. The CEN3-2 mu composite plasmids are relatively stably maintained in yeast at a copy number of about one per haploid genome, and segregate through meiosis in a typical Mendelian pattern. Some of the CEN3-2 mu composite plasmids isolated from yeast contain deletions of variable size that remove the functional centromere, resulting in loss of the CEN3 control and reversion to high copy number. Formation of the CEN3 deletions requires the specialized recombination system (inverted repeat sequences and FLP gene) of the yeast 2 mu plasmid.     

Saccharomyces cerevisiae centromere CEN11 does not induce chromosome instability when integrated into the Aspergillus nidulans genome.

We constructed Aspergillus nidulans transformation plasmids containing the A. nidulans argB+ gene and either containing or lacking centromeric DNA from Saccharomyces cerevisiae chromosome XI (CEN11). The plasmids transformed an argB Aspergillus strain to arginine independence at indistinguishable frequencies. Stable haploid transformants were obtained with both plasmids, and strains were identified in which the plasmids had integrated into chromosome III by homologous recombination at the argB locus. Plasmid DNA was recovered from a transformant containing CEN11, and the sequence of the essential portion of CEN11 was determined to be unaltered. The transformants were further characterized by using them to construct heterozygous diploids and then testing the diploids for preferential loss of the plasmid-containing chromosomes. The CEN11 sequence had little or no effect on chromosome stability. Thus, CEN11 does not prevent chromosomal integration of plasmid DNA and probably lacks centromere activity in Aspergillus spp.     

Isolation and characterization of the centromere from chromosome V (CEN5) of Saccharomyces cerevisiae.

We have cloned a functional centromeric DNA sequence from Saccharomyces cerevisiae. Using the 2 mu chromosome-loss mapping technique and meiotic tetrad analysis, we have identified this DNA sequence as the centromere of chromosome V (CEN5). The CEN5 sequence has been localized on an 1,100-base-pair BamHI-BglII restriction fragment. Plasmids containing CEN5 and an autonomously replicating sequence are mitotically stable in S. cerevisiae and segregate in a Mendelian fashion during meiosis.     

Transformation of Kluyveromyces lactis with the kanamycin (G418) resistance gene of Tn903

Direct selection of Kluyveromyces lactis resistant to the antibiotic G418 following transformation with the kanamycin resistance gene of Tn903 required the development of a procedure for producing high yields of viable spheroplasts and for the isolation of autonomous replication sequences (ARS). To obtain high yields of viable spheroplasts, cells were treated with (1) a thiol-reducing agent (L-cysteine), and (2) a high concentration of an osmotic stabilizer, 1.5 M sorbitol. Several ARS-containing plasmids were selected from a K. lactis recombinant DNA library in K. lactis and in Saccharomyces cerevisiae. Two of four ARS clones selected in K. lactis promoted transformation frequencies of 5-10 X 10(2) G418-resistant cells/micrograms of plasmid DNA. This frequency of transformation was at least twice as high as with ARS clones selected in S. cerevisiae. The stability of ARS-containing plasmids varied; after 20 generations of growth in the presence of G418, 16-38% of the cells remained resistant to the drug. In the absence of selection pressure less than 5% of the cells retained the drug-resistance phenotype. Plasmids containing the ARS1 or 2 mu replicon of S. cerevisiae failed to transform K. lactis for G418 resistance. Inclusion of S. cerevisiae centromere, CEN4, in a K. lactis ARS recombinant plasmid did not increase the stability of the plasmid in K. lactis, and marker genes on the vector segregated predominantly 4-:0+ through meiosis. We conclude that neither the ARS sequences or the centromere of S. cerevisiae was functioning in K. lactis.     

高SO2产量啤酒酵母工业菌株的构建

二氧化硫在啤酒中具有抗氧化的重要功能,而在其形成过程中APS激酶(MET14编码)起着非常重要的作用。以二氧化硫产量较高的青岛啤酒酵母(Saccharomyces cerevisiae)YSF-5的总DNA为模板,用PCR方法克隆得到MET14基因。为使目的基因在酿酒酵母中表达,以大肠杆菌-酿酒酵母穿梭质粒YEp352为载体,以PGK1强启动子为调控元件,构建了重组表达质粒pPM,并转化酿酒酵母YS58。转化子在YNB添加亮氨酸、组氨酸和色氨酸的选择性培养基上筛选鉴定,盐酸副玫瑰苯胺法测得转化子的SO2产量是受体菌的2倍左右。在重组表达质粒pPM的基础上添加铜抗性标记基因构建了重组表达质粒pCPM,并转化青岛啤酒工业酵母菌株YSF-38,转化子在YEPD 4mmol/L CuSO4的选择性培养基上筛选鉴定,实验室条件下培养后,测得转化子YSF-38(pCPM)的SO2产量是受体菌的3.2倍。用该转化子在青岛啤酒厂进行小型发酵实验,结果表明在发酵结束时,YSF-38(pCPM)转化子的SO2产量是受体菌的1.4倍。因此,MET14基因的有效表达可以提高啤酒工业酵母的SO2产量。     

Molecular cloning of chromosome I DNA from Saccharomyces cerevisiae: isolation and analysis of the CEN1-ADE1-CDC15 region.

To continue the systematic examination of the physical and genetic organization of an entire Saccharomyces cerevisiae chromosome, the DNA from the CEN1-ADE1-CDC15 region from chromosome I was isolated and characterized. Starting with the previously cloned ADE1 gene (J. C. Crowley and D. B. Kaback, J. Bacteriol. 159:413-417, 1984), a series of recombinant lambda bacteriophages containing 82 kilobases of contiguous DNA from chromosome I were obtained by overlap hybridization. The cloned sequences were mapped with restriction endonucleases and oriented with respect to the genetic map by determining the physical positions of the CDC15 gene and the centromeric DNA (CEN1). The CDC15 gene was located by isolating plasmids from a YCp50 S. cerevisiae genomic library that complemented the cdc15-1 mutation. S. cerevisiae sequences from these plasmids were found to be represented among those already obtained by overlap hybridization. The cdc15-1-complementing plasmids all shared only one intact transcribed region that was shown to contain the bona fide CDC15 gene by in vitro gene disruption and one-step replacement to delete the chromosomal copy of this gene. This deletion produced a recessive lethal phenotype that was also recessive to cdc15-1. CEN1 was located by finding a sequence from the appropriate part of the cloned region that stabilized the inheritance of autonomously replicating S. cerevisiae plasmid vectors. Finally, RNA blot hybridization and electron microscopy of R-loop-containing DNA were used to map transcribed regions in the 23 kilobases of DNA that went from CEN1 to CDC15. In addition to the transcribed regions corresponding to the ADE1 and ADC15 genes, this DNA contained five regions that gave rise to polyadenylated RNA, at least two regions complementary to 4S RNA species, and a Ty1 transposable element. Notably, a higher than average proportion of the DNA examined was transcribed into RNA.     

Identification and characterization of the centromere from chromosome XIV in Saccharomyces cerevisiae.

A functional centromere located on a small DNA restriction fragment from Saccharomyces cerevisiae was identified as CEN14 by integrating centromere-adjacent DNA plus the URA3 gene by homologous recombination into the yeast genome and then by localizing the URA3 gene to chromosome XIV by standard tetrad analysis. DNA sequence analysis revealed that CEN14 possesses sequences (elements I, II, and III) that are characteristic of other yeast centromeres. Mitotic and meiotic analyses indicated that the CEN14 function resides on a 259-base-pair (bp) RsaI-EcoRV restriction fragment, containing sequences that extend only 27 bp to the right of the element I to III region. In conjunction with previous findings on CEN3 and CEN11, these results indicate that the specific DNA sequences required in cis for yeast centromere function are contained within a region about 150 bp in length.     

Gene-enzyme relationships in the proline biosynthetic pathway of Saccharomyces cerevisiae.

The PRO1, PRO2, and PRO3 genes were isolated by functional complementation of pro1, pro2, and pro3 (proline-requiring) strains of Saccharomyces cerevisiae. Independent clones with overlapping inserts were isolated from S. cerevisiae genomic libraries in YEp24 (2 microns) and YCp50 (CEN) plasmids. The identity of each gene was determined by gene disruption, and Southern hybridization and genetic analyses confirmed that the bona fide genes had been cloned. Plasmids containing each gene were introduced into known bacterial proline auxotrophs, and the ability to restore proline prototrophy was assessed. Interspecies complementation demonstrated that the S. cerevisiae PRO1 gene encoded gamma-glutamyl kinase, PRO2 encoded gamma-glutamyl phosphate reductase, and PRO3 encoded delta 1-pyrroline-5-carboxylate reductase. The presence of the PRO3 gene on a high-copy-number plasmid in S. cerevisiae caused a 20-fold overproduction of delta 1-pyrroline-5-carboxylate reductase. The PRO2 gene mapped on chromosome XV tightly linked to cdc66, and the PRO3 gene was located on the right arm of chromosome V between HIS1 and the centromere.     

Isolation and characterization of the yeast 3-phosphoglycerokinase gene (PGK) by an immunological screening technique

An immunological screening technique has been used for the detection of a specific antigen-producing clone in a bank of bacterial colonies containing hybrid plasmids. This technique involves covalent attachment of antiserum to cyanogen bromide-activated paper discs, contact of this paper with lysed colonies on agar plates, and finally detection of the bound antigen with 125I-labeled antibody. Using this method, we have identified an Escherichia coli colony, containing a yeast DNA insert in plasmid ColE1, that produces antigen which combines with antibody directed against purified yeast 3-phosphoglycerate kinase. The hybrid plasmid (pYe57E2) obtained by this procedure has been shown by both biochemical and genetic methods to contain the structural gene PGK for yeast 3-phosphoglycerate kinase. The location of the PGK structural gene on pYe56E2 was determined by immunological screening of E. coli colonies bearing plasmids containing various reconstructions of the original yeast DNA insert. Examination of the expression of the cloned yeast PGK gene in both E. coli and yeast has shown that functional enzyme is synthesized from the cloned gene in yeast, but not in E. coli.     

Multifunctional Centromere Binding Factor 1 Is Essential for Chromosome Segregation in the Human Pathogenic Yeast Candida glabrata

The CBF1 (centromere binding factor 1) gene of Candida glabrata was cloned by functional complementation of the methionine biosynthesis defect of a Saccharomyces cerevisiae cbf1 deletion mutant. The C. glabrata-coded protein, CgCbf1, contains a basic-helix-loop-helix leucine zipper domain and has features similar to those of other budding yeast Cbf1 proteins. CgCbf1p binds in vitro to the centromere DNA element I (CDEI) sequence GTCACATG with high affinity (0.9 x 10(9) M(-1)). Bandshift experiments revealed a pattern of protein-DNA complexes on CgCEN DNA different from that known for S. cerevisiae. We examined the effect of altering the CDEI binding site on CEN plasmid segregation, using a newly developed colony-sectoring assay. Internal deletion of the CDEI binding site led only to a fivefold increase in rates of plasmid loss, indicating that direct binding of Cbf1p to the centromere DNA is not required for full function. Additional deletion of sequences to the left of CDEI, however, led to a 70-fold increase in plasmid loss rates. Deletion of the CBF1 gene proved to be lethal in C. glabrata. C. glabrata cells containing the CBF1 gene under the influence of a shutdown promoter (tetO-ScHOP) arrested their growth after 5 h of cultivation in the presence of the reactive drug doxycycline. DAPI (4',6'-diamidino-2-phenylindole) staining of the arrested cells revealed a significant increase in the number of large-budded cells with single nuclei, 2C DNA content, and short spindles, indicating a defect in the G(2)/M transition of the cell cycle. Thus, we conclude that Cbf1p is required for chromosome segregation in C. glabrata.     

Centromeric DNA from chromosome VI in Saccharomyces cerevisiae strains

The functional sequence from the centromere in chromosome VI ( CEN6 ) of Saccharomyces cerevisiae was narrowed down to a stretch of 500 bp by a Bal31 deletion approach. The DNA sequence in this region shows three long stretches, 40 bp, 96 bp, and 63 bp of 85% and more AT pairs and a pyrimidine purine bias in the individual single strands. We assume that the CEN6 functional sequences encompass these AT-rich stretches because this part shows striking similarities to sequence elements common to CEN3 and CEN11 DNA. A strain comparison revealed that CEN6 DNA sequences are confined to the Saccharomyces genus and probably only to the S. cerevisiae species. CEN6 is not highly conserved within S. cerevisiae strains because EcoRI and HindIII restriction site variants are found with high frequency.     

Toxic effects of excess cloned centromeres.

Plasmids carrying a Saccharomyces cerevisiae centromere have a copy number of one or two, whereas other yeast plasmids have high copy numbers. The number of CEN plasmids per yeast cell was made artificially high by transforming cells simultaneously with several different CEN plasmids carrying different, independently selectable markers. Some host cells carried five different CEN plasmids and an average total of 13 extra copies of CEN3. Several effects were noted. The copy number of each plasmid was unexpectedly high. The plasmids were mutually unstable. Cultures contained many dead cells. The viable host cells grew more slowly than control cells, even in nonselective medium. There was a pause in the cell cycle at or just before mitosis. We conclude that an excess of centromeres is toxic and that the copy number of centromere plasmids is low partly because of selection against cells carrying multiple centromere plasmids. The toxicity may be caused by competition between the centromeres for some factor present in limiting quantities, e.g., centromere-binding proteins, microtubules, or space on the spindle pole body.     

Role of conserved sequence elements in yeast centromere DNA.

Conserved sequence features in Saccharomyces cerevisiae CEN DNA are confined to a region of approximately 120 bp. The highly conserved 8 bp at the left (PuTCACPuTG) constitute the left boundary of a functional CEN DNA as shown by the analysis of a series of Bal31 deletions. The right boundary of a functional CEN DNA lies within the conserved 25 bp at the right (TGT-T-TG--TTCCGAA-----AAA) or a few base pairs further outside of the 120-bp region. One mutant which just lacks the left conserved DNA element PuTCACPuTG can still assemble into a partially functional mitotic centromere and it assembles into a well functioning meiotic centromere. The sequences between the two conserved terminal DNA elements can be increased in length (+50%) or in GC content (from 6% to 12%) without measurable changes in mitotic and meiotic segregations of plasmids carrying such CEN mutations. The naturally occurring length and GC content of this centromere DNA sequence element is, therefore, not essential for centromere function. We discuss the possibility that it partly acts as a hinge region between two domains. Finally, we tested integrations of CEN DNA into the genome and found a toleration of wild-type CEN6 DNA when present 3' of the LYS2 gene.     

Genetic analysis of the mitotic transmission of minichromosomes

The fidelity of the mitotic transmission of minichromosomes in S. cerevisiae is monitored by a novel visual assay that allows one to detect changes in plasmid copy number in individual mitotic divisions. This assay is used to investigate the mitotic transmission of a plasmid containing a putative yeast origin of replication (ARS 1) and a centromere (CEN3). The rate of improper segregation for the minichromosome is 200-fold higher than observed for a normal chromosome. However, the replication of the minichromosome is stringently controlled; it overreplicates less than once per one thousand mitotic divisions. We also use this assay to isolate and characterize mutations in ARS 1 and CEN3. The mutations in ARS 1 define a new domain required for its optimal activity, and the mutations in CEN3 suggest that the integrity of element II is not essential for centromere function. Finally, the phenotypes of the mutations in ARS 1 and CEN3 are consistent with their function in replication and segregation, respectively.     

Molecular cloning and genetic mapping of the DNA topoisomerase II gene of Saccharomyces cerevisiae

The structural gene for DNA topoisomerase II from the yeast Saccharomyces cerevisiae has been cloned. The clones were selected from a YEp13 plasmid bank of yeast DNA by complementing a temperature-sensitive mutation (top2-1) in the topoisomerase II gene, TOP2. Chromosomal integrants of the clone were derived by homologous recombination in strains lacking the 2 mu circle plasmid. Genetic analysis of these integrants indicates that we have cloned the TOP2 gene and not an extragenic suppressor. A YEp13-TOP2 hybrid plasmid integrant was used to localize the TOP2 gene to the left arm of chromosome XIV by the 2 mu circle-directed marker loss method. Results from standard meiotic mapping experiments indicate that TOP2 is about 16 centi-Morgans to the centromere proximal side of MET4. Northern blot analysis of TOP2 RNA isolated from a wild-type strain and from an rna2 mutant shows the RNA to be 4.5 kb long in both cases, thus indicating that the TOP2 gene has no large introns.     

Mammalian and viral DNA sequences which interfere with the maintenance of a centromeric vector in yeast.

We constructed a recombinant plasmid by inserting into the pRS314 yeast centromeric plasmid vector the mouse DNA sequence responsible for the maintenance in transgenic mice of plasmid p12B1 (1). Such constructs could constitute convenient shuttle vectors between yeast and mouse cells. However, the recombinant molecule could not be established as a stable plasmid in Saccharomyces cerevisiae. A region with a limited similarity to the yeast centromere (CEN element) is present in this mouse sequence as well as in two other sequences subsequently identified in a data bank search using the CEN consensus. One of them is localized in Bovine Papillomavirus Type 1 DNA, and the other one in the human beta-globin locus. Once inserted in pRS314, these two sequences showed the same inhibitory effect on plasmid maintenance as the p12B1 mouse DNA fragment. This effect appears to depend on the simultaneous presence in the construct of one of the "CEN-like regions" and of an authentic CEN element. Non-centromeric yeast plasmids carrying one of the three sequences could replicate autonomously, and were even stabilized to a significant extent. These results identify in the genomes of higher eukaryotes and their viruses a family of sequences which cannot be simply cloned in centromeric yeast vectors.     

Single base-pair mutations in centromere element III cause aberrant chromosome segregation in Saccharomyces cerevisiae.

In this paper we show that a 211-base pair segment of CEN3 DNA is sufficient to confer wild-type centromere function in the yeast Saccharomyces cerevisiae. We used site-directed mutagenesis of the 211-base pair fragment to examine the sequence-specific functional requirements of a conserved 11-base pair segment of centromere DNA, element III (5'-TGATTTATCCGAA-3'). Element III is the most highly conserved of the centromeric DNA sequences, differing by only a single adenine X thymine base pair among the four centromere DNAs sequenced thus far. All of the element III sequences contain specific cytosine X guanine base pairs, including a 5'-CCG-3' arrangement, which we targeted for single cytosine-to-thymine mutations by using sodium bisulfite. The effects of element III mutations on plasmid and chromosome segregation were determined by mitotic stability assays. Conversion of CCG to CTG completely abolished centromere function both in plasmids and in chromosome III, whereas conversion of CCG to TCG decreased plasmid and chromosome stability moderately. The other two guanine X cytosine base pairs in element III could be independently converted to adenine X thymine base pairs without affecting plasmid or chromosome stability. We concluded that while some specific nucleotides within the conserved element III sequence are essential for proper centromere function, other conserved nucleotides can be changed.     

Plasmid construction by homologous recombination in yeast

We describe a convenient method for constructing new plasmids that relies on interchanging parts of plasmids by homologous recombination in Saccharomyces cerevisiae. A circular recombinant plasmid of a desired structure is regenerated after transformation of yeast with a linearized plasmid and a DNA restriction fragment containing appropriate homology to serve as a substrate for recombinational repair. The free ends of the input DNA molecules need not be homologous in order for efficient recombination between internal homologous regions to occur. The method is particularly useful for incorporating into or removing from plasmids selectable markers, centromere or replication elements, or particular alleles of a gene of interest. Plasmids constructed in yeast can subsequently be recovered in an Escherichia coli host. Using this method, we have constructed an extended series of new yeast centromere, episomal and replicating (YCp, YEp, and YRp) plasmids containing, in various combinations, the selectable yeast markers LEU2, HIS3, LYS2, URA3 and TRP1.