Mechanisms of improved knee flexion after rectus femoris transfer surgery

Rectus femoris transfer is frequently performed to treat stiff-knee gait in subjects with cerebral palsy. In this surgery, the distal tendon is released from the patella and re-attached to one of several sites, such as the sartorius or the iliotibial band. Surgical outcomes vary, and the mechanisms by which the surgery improves knee motion are unclear. The purpose of this study was to clarify the mechanism by which the transferred muscle improves knee flexion by examining three types of transfers. Muscle-actuated dynamic simulations were created of ten children diagnosed with cerebral palsy and stiff-knee gait. These simulations were altered to represent surgical transfers of the rectus femoris to the sartorius and the iliotibial band. Rectus femoris transfers in which the muscle remained attached to the underlying vasti through scar tissue were also simulated by reducing but not eliminating the muscle's knee extension moment. Simulated transfer to the sartorius, which converted the rectus femoris’ knee extension moment to a flexion moment, produced 32±8° improvement in peak knee flexion on average. Simulated transfer to the iliotibial band, which completely eliminated the muscle's knee extension moment, predicted only slightly less improvement in peak knee flexion (28±8°). Scarred transfer simulations, which reduced the muscle's knee extension moment, predicted significantly less (p<0.001) improvement in peak knee flexion (14±5°). Simulations revealed that improved knee flexion following rectus femoris transfer is achieved primarily by reduction of the muscle's knee extension moment. Reduction of scarring of the rectus femoris to underlying muscles has the potential to enhance knee flexion.     

Comparison of the hindfoot axes of a multi-segment foot model to the underlying bony anatomy

Musculoskeletal models used in gait analysis require coordinate systems to be identified for the body segments of interest. It is not obvious how hindfoot (or rearfoot) axes defined by skin-mounted markers relate to the anatomy of the underlying bones. The aim of this study was to compare the marker-based axes of the hindfoot in a multi-segment foot model to the orientations of the talus and calcaneus as characterized by their principal axes of inertia. Twenty adult females with no known foot deformities had radio-opaque markers placed on their feet and ankles at the foot model marker locations. CT images of the feet were acquired as the participants lay supine with their feet in a semi-weight bearing posture. The spatial coordinates of the markers were obtained from the images and used to define the foot model axes. Segmented masks of the tali and calcanei were used to create 3D bone models, from which the principal axes of the bones were obtained. The orientations of the principal axes were either within the range of typical values reported in the imaging literature or differed in ways that could be explained by variations in how the angles were defined. The model hindfoot axis orientations relative to the principal axes of the bones had little bias but were highly variable. Consideration of coronal plane hindfoot alignment as measured clinically and radiographically suggested that the model hindfoot coordinate system represents the posterior calcaneal tuberosity, rather than the calcaneus as a whole.     

Neuromuscular response of hip-spanning and low back muscles to medio-lateral foot center of pressure manipulation during gait

Background: Footwear-generated medio-lateral foot center of pressure manipulation has been shown to have potential positive effects on gait parameters of hip osteoarthritis patients, ultimately reducing maximum joint reaction forces. The objective of this study was to investigate effects of medio-lateral foot center of pressure manipulation on muscle activity of hip-spanning and back muscles during gait in bilateral hip osteoarthritis patients. Methods: Foot center of pressure was shifted along the medio-lateral foot axis using a foot-worn biomechanical device allowing controlled center of pressure manipulation. Sixteen female bilateral hip osteoarthritis patients underwent electromyography analysis while walking in the device set to three parasagittal configurations: neutral (control), medial, and lateral. Seven hip-spanning muscles (Gluteus Medius, Gluteus Maximus, Tensor Fascia Latae, Rectus Femoris, Semitendinosis, Biceps Femoris, Adductor Magnus) and one back muscle (Erector Spinae) were analyzed. Magnitude and temporal parameters were calculated. Results: The amplitude and temporal parameter varied significantly between foot center of pressure positions for 5 out of 8 muscles each for either the more or less symptomatic leg in at least one subphase of the gait cycle. Conclusion: Medio-lateral foot center of pressure manipulation significantly affects neuromuscular pattern of hip and back musculature during gait in female hip bilateral osteoarthritis patients.     

Assessment of lameness in sows using gait,footprints, postural behaviour and foot lesion analysis

Lameness in sows has an economic impact on pig production and is a major welfare concern. The aim of the present project was to develop methods to evaluate and quantify lameness in breeding sows. Five methods to study lameness were compared between themselves and with visual gait scoring used as a reference: footprint analysis, kinematics, accelerometers, lying-to-standing transition and foot lesion observation. Fifty sows of various parities and stages of gestation were selected using visual gait scoring and distributed into three groups: lame (L), mildly lame (ML) and non-lame (NL). They were then tested using each method. Kinematics showed that L sows had a lower walking speed than NL sows (L: 0.83 ± 0.04, NL: 0.96 ± 0.03 m/s; P < 0.05), a shorter stride length than ML sows (L: 93.0 ± 2.6, ML: 101.2 ± 1.5 cm; P < 0.05) and a longer stance time than ML and NL sows (L: 0.83 ± 0.03, ML: 0.70 ± 0.03, NL: 0.69 ± 0.02 s; P < 0.01). Accelerometer measurements revealed that L sows spent less time standing over a 24-h period (L: 6.3 ± 1.3, ML: 13.7 ± 2.4, NL: 14.5 ± 2.4%; P < 0.01), lay down earlier after feeding (L: 33.4 ± 4.6, ML: 41.7 ± 3.1, NL: 48.6 ± 2.9 min; P < 0.05) and tended to step more often during the hour following feeding (L: 10.1 ± 2.0, ML: 6.1 ± 0.5, NL: 5.4 ± 0.4 step/min standing; P = 0.06) than NL sows, with the ML sows having intermediate values. Visual observation of back posture showed that 64% of L sows had an arched back, compared with only 14% in NL sows (P = 0.02). Finally, footprint analysis and observation of lying-to-standing transition and foot lesions were not successful in detecting significant differences between L, ML and NL sows. In conclusion, several quantitative variables obtained from kinematics and accelerometers proved to be successful in identifying reliable indicators of lameness in sows. Further work is needed to relate these indicators with causes of lameness and to develop methods that can be implemented on the farm.     

Shear and pressure under the first ray in neuropathic diabetic patients: Implications for support of the longitudinal arch

ObjectiveTo assess dynamic arch support in diabetic patients at risk for Charcot neuroarthopathy whose arch index has not yet shown overt signs of foot collapse.MethodsTwo indirect measures of toe flexor activation (ratios: peak hallux pressure to peak metatarsal pressure – Ph/Pm; peak posterior hallux shear to peak posterior metatarsal shear – Sh/Sm) were obtained with a custom built system for measuring shear and pressure on the plantar surface of the foot during gait. In addition, the tendency of the longitudinal arch to flatten was measured by quantifying the difference in shear between the 1st metatarsal head and the heel (S_flatten) during the first half of the stance phase. Four stance phases from the same foot for 29 participants (16 control and 13 neuropathic diabetic) were assessed.ResultsThe peak load ratio under the hallux (Ph/Pm) was significantly higher in the control group (2.10±1.08 versus 1.13±0.74, p=0.033). Similarly, Sh/Sm was significantly higher in the control group (1.87±0.88 versus 0.88±0.45, p=0.004). The difference in anterior shear under the first metatarsal head and posterior shear under the lateral heel (S_flatten) was significantly higher in the diabetic group (p<0.01). Together these findings demonstrate reduced plantar flexor activity in the musculature responsible for maintaining the longitudinal arch.ConclusionsWith no significant difference in arch index between the two groups, but significant differences in Ph/Pm, Sh/Sm and S_flatten the collective results suggest there are changes in muscle activity that precede arch collapse.     

Validity and reliability of a shoe-embedded sensor module for measuring foot progression angle during over-ground walking

Wearable systems are becoming increasingly popular for gait assessment outside of laboratory settings. A single shoe-embedded sensor module can measure the foot progression angle (FPA) during walking. The FPA has important clinical utility, particularly in populations with knee osteoarthritis, as it is a target for biomechanical treatments. However, the validity and the day-to-day reliability of FPA measurement using wearable systems during over-ground walking has yet to be established. Two gait analysis sessions on 20 healthy adults were conducted. During both sessions, participants performed natural over-ground walking in a motion capture laboratory and on a 100 m linear section of outdoor athletics track. FPA was measured in the laboratory via marker trajectory data, while the sensor module measured FPA during the outdoor track walking. Validity was examined by comparing the laboratory- and sensor-measured average FPA. Day-to-day reliability was examined by comparing the sensor-measured FPA between the first and second gait analysis sessions. Average absolute error between motion capture and sensor measured FPA were 1.7° and 2.1° at session 1 and 2, respectively. A Bland and Altman plot indicated no systematic bias, with 95% limit of agreement widths of 4.2° – 5.1°. Intraclass correlation coefficient (ICC_2k) analysis resulted in good to excellent validity (ICC = 0.89 – 0.91) and reliability (ICC = 0.95). Overall, the shoe-embedded sensor module is a valid and reliable method of measuring FPA during over-ground walking without the need for laboratory equipment.     

Kinematic correlates of walking cadence in the foot

Evidence has frequently been reported of modifications in gait patterns within the lower limb related to the cadence of walking. Most reports have concerned relationships between cadence and kinematic and the kinetic changes occurring in the main joints and muscles of the lower limb as a whole. The aim of the present study was to assess whether significant changes are also measurable in kinematics of the foot segments. An existing 15 marker-set protocol allowed a four-segment foot and shank model to be defined for relative rotations between the segments to be calculated. Stereophotogrammetry was employed to record marker position data from ten subjects walking at three cadences. The slow- and normal cadence datasets showed similar profiles of joint rotation in three anatomical planes, but significant differences were found between these and the fast cadence. At all joints, frame-by-frame statistical analysis revealed increased dorsiflexion from heel-strike to midstance (p<0.05) and increased plantarflexion from midstance to toe-off (p<0.05) with increasing cadence. From foot-flat to heel-rise, the fast cadence kinematic data showed a decreased range of motion in the sagittal-plane between forefoot and rearfoot (3.2°±1.2° at slow cadence; 2.0°±0.8° at fast cadence; p<0.05). The cadences imposed and the multisegment protocol revealed significant kinematic changes in the joints of the foot during barefoot walking.     

Predicting timing of foot strike during running,independent of striking technique,using principal component analysis of joint angles

As 3-dimensional (3D) motion-capture for clinical gait analysis continues to evolve, new methods must be developed to improve the detection of gait cycle events based on kinematic data. Recently, the application of principal component analysis (PCA) to gait data has shown promise in detecting important biomechanical features. Therefore, the purpose of this study was to define a new foot strike detection method for a continuum of striking techniques, by applying PCA to joint angle waveforms. In accordance with Newtonian mechanics, it was hypothesized that transient features in the sagittal-plane accelerations of the lower extremity would be linked with the impulsive application of force to the foot at foot strike. Kinematic and kinetic data from treadmill running were selected for 154 subjects, from a database of gait biomechanics. Ankle, knee and hip sagittal plane angular acceleration kinematic curves were chained together to form a row input to a PCA matrix. A linear polynomial was calculated based on PCA scores, and a 10-fold cross-validation was performed to evaluate prediction accuracy against gold-standard foot strike as determined by a 10 N rise in the vertical ground reaction force. Results show 89–94% of all predicted foot strikes were within 4 frames (20 ms) of the gold standard with the largest error being 28 ms. It is concluded that this new foot strike detection is an improvement on existing methods and can be applied regardless of whether the runner exhibits a rearfoot, midfoot, or forefoot strike pattern.     

A robotic cadaveric flatfoot analysis of stance phase

The symptomatic flatfoot deformity (pes planus with peri-talar subluxation) can be a debilitating condition. Cadaveric flatfoot models have been employed to study the etiology of the deformity, as well as invasive and noninvasive surgical treatment strategies, by evaluating bone positions. Prior cadaveric flatfoot simulators, however, have not leveraged industrial robotic technologies, which provide several advantages as compared with the previously developed custom fabricated devices. Utilizing a robotic device allows the researcher to experimentally evaluate the flatfoot model at many static instants in the gait cycle, compared with most studies, which model only one to a maximum of three instances. Furthermore, the cadaveric tibia can be statically positioned with more degrees of freedom and with a greater accuracy, and then a custom device typically allows. We created a six degree of freedom robotic cadaveric simulator and used it with a flatfoot model to quantify static bone positions at ten discrete instants over the stance phase of gait. In vivo tibial gait kinematics and ground reaction forces were averaged from ten flatfoot subjects. A fresh frozen cadaveric lower limb was dissected and mounted in the robotic gait simulator (RGS). Biomechanically realistic extrinsic tendon forces, tibial kinematics, and vertical ground reaction forces were applied to the limb. In vitro bone angular position of the tibia, calcaneus, talus, navicular, medial cuneiform, and first metatarsal were recorded between 0% and 90% of stance phase at discrete 10% increments using a retroreflective six-camera motion analysis system. The foot was conditioned flat through ligament attenuation and axial cyclic loading. Post-flat testing was repeated to study the pes planus deformity. Comparison was then made between the pre-flat and post-flat conditions. The RGS was able to recreate ten gait positions of the in vivo pes planus subjects in static increments. The in vitro vertical ground reaction force was within ± 1 standard deviation (SD) of the in vivo data. The in vitro sagittal, coronal, and transverse plane tibial kinematics were almost entirely within ± 1 SD of the in vivo data. The model showed changes consistent with the flexible flatfoot pathology including the collapse of the medial arch and abduction of the forefoot, despite unexpected hindfoot inversion. Unlike previous static flatfoot models that use simplified tibial degrees of freedom to characterize only the midpoint of the stance phase or at most three gait positions, our simulator represented the stance phase of gait with ten discrete positions and with six tibial degrees of freedom. This system has the potential to replicate foot function to permit both noninvasive and surgical treatment evaluations throughout the stance phase of gait, perhaps eliciting unknown advantages or disadvantages of these treatments at other points in the gait cycle.     

3D gait assessment in young and elderly subjects using foot-worn inertial sensors

This study describes the validation of a new wearable system for assessment of 3D spatial parameters of gait. The new method is based on the detection of temporal parameters, coupled to optimized fusion and de-drifted integration of inertial signals. Composed of two wirelesses inertial modules attached on feet, the system provides stride length, stride velocity, foot clearance, and turning angle parameters at each gait cycle, based on the computation of 3D foot kinematics. Accuracy and precision of the proposed system were compared to an optical motion capture system as reference. Its repeatability across measurements (test-retest reliability) was also evaluated. Measurements were performed in 10 young (mean age 26.1±2.8 years) and 10 elderly volunteers (mean age 71.6±4.6 years) who were asked to perform U-shaped and 8-shaped walking trials, and then a 6-min walking test (6 MWT). A total of 974 gait cycles were used to compare gait parameters with the reference system. Mean accuracy±precision was 1.5±6.8 cm for stride length, 1.4±5.6 cm/s for stride velocity, 1.9±2.0 cm for foot clearance, and 1.6±6.1° for turning angle. Difference in gait performance was observed between young and elderly volunteers during the 6 MWT particularly in foot clearance. The proposed method allows to analyze various aspects of gait, including turns, gait initiation and termination, or inter-cycle variability. The system is lightweight, easy to wear and use, and suitable for clinical application requiring objective evaluation of gait outside of the lab environment.     

Dynamic plantar loading index: understanding the benefit of custom foot orthoses for painful pes cavus

The purpose of this study was to evaluate a new method showing how custom foot orthoses (CFO) improve dynamics of plantar loading. The method is based on the probability distribution of peak pressure time series and is quantified using the Regression Factor (RF). RF is a least square regression slope between the experimentally observed plantar pressure magnitude probability distribution and a modeled Gaussian shape. Plantar pressure data from a randomized controlled trial of 154 participants with painful Pes Cavus were retrospectively re-analyzed. The participants were randomized to an active treatment group given CFO or a control group given sham orthoses. The location of 2(nd) Peak pressure as a percentage of stance time (P(Loc2)) and its magnitude (P(M2)) was also calculated. In addition, plantar pressure data were collected on 23 healthy volunteers with normal foot alignment and no foot pain. Results demonstrated Pes Cavus had a significantly lower RF than healthy participants (0.30 v. 0.51; p<10(-7)). P(M2) was reduced in both active and control groups. However, RF and the P(Loc2) were only changed in the active group (p<0.005) without any significant change in the control group (p>0.5). This study suggests that painful Pes Cavus alters the shape of probability distribution of plantar loading during walking and CFO are an effective therapeutic solution that can significantly improve it. Further use of the RF index and 2(nd) peak pressure location as an outcome measure for treatment of foot and ankle deformities is suggested.     

Measurement of multi-segment foot joint angles during gait using a wearable system

Usually the measurement of multi-segment foot and ankle complex kinematics is done with stationary motion capture devices which are limited to use in a gait laboratory. This study aimed to propose and validate a wearable system to measure the foot and ankle complex joint angles during gait in daily conditions, and then to investigate its suitability for clinical evaluations. The foot and ankle complex consisted of four segments (shank, hindfoot, forefoot, and toes), with an inertial measurement unit (3D gyroscopes and 3D accelerometers) attached to each segment. The angles between the four segments were calculated in the sagittal, coronal, and transverse planes using a new algorithm combining strap-down integration and detection of low-acceleration instants. To validate the joint angles measured by the wearable system, three subjects walked on a treadmill for five minutes at three different speeds. A camera-based stationary system that used a cluster of markers on each segment was used as a reference. To test the suitability of the system for clinical evaluation, the joint angle ranges were compared between a group of 10 healthy subjects and a group of 12 patients with ankle osteoarthritis, during two 50-m walking trials where the wearable system was attached to each subject. On average, over all joints and walking speeds, the RMS differences and correlation coefficients between the angular curves obtained using the wearable system and the stationary system were 1 deg and 0.93, respectively. Moreover, this system was able to detect significant alteration of foot and ankle function between the group of patients with ankle osteoarthritis and the group of healthy subjects. In conclusion, this wearable system was accurate and suitable for clinical evaluation when used to measure the multi-segment foot and ankle complex kinematics during long-distance walks in daily life conditions.     

Impact of ankle foot orthosis stiffness on Achilles tendon and gastrocnemius function during unimpaired gait

Ankle foot orthoses (AFOs) are designed to improve gait for individuals with neuromuscular conditions and have also been used to reduce energy costs of walking for unimpaired individuals. AFOs influence joint motion and metabolic cost, but how they impact muscle function remains unclear. This study investigated the impact of different stiffness AFOs on medial gastrocnemius muscle (MG) and Achilles tendon (AT) function during two walking speeds. We performed gait analyses for eight unimpaired individuals. Each individual walked at slow and very slow speeds with a 3D printed AFO with no resistance (free hinge condition) and four levels of ankle dorsiflexion stiffness: 0.25 Nm/°, 1 Nm/°, 2 Nm/°, and 3.7 Nm/°. Motion capture, ultrasound, and musculoskeletal modeling were used to quantify MG and AT lengths with each AFO condition. Increasing AFO stiffness increased peak AFO dorsiflexion moment with decreased peak knee extension and peak ankle dorsiflexion angles. Overall musculotendon length and peak AT length decreased, while peak MG length increased with increasing AFO stiffness. Peak MG activity, length, and velocity significantly decreased with slower walking speed. This study provides experimental evidence of the impact of AFO stiffness and walking speed on joint kinematics and musculotendon function. These methods can provide insight to improve AFO designs and optimize musculotendon function for rehabilitation, performance, or other goals.     

Comparison of lower limb kinetics,kinematics and muscle activation during drop jumping under shod and barefoot conditions

This study was to investigate the acute effects of wearing shoes on lower limb kinetics, kinematics and muscle activation during a drop jump. Eighteen healthy men performed a drop jump under barefoot and shod conditions. Vertical ground reaction force (GRF) was measured on a force plate during the contact phase of a drop jump, and GRF valuables were calculated for each condition. The angles of the knee and ankle joints, and the foot strike angle (the angle between the plantar surface of the foot and the ground during ground contact) as well as the electromyography of 7 muscles were measured. The shod condition showed a significant larger first peak GRF, longer time to first peak GRF from the initial ground contact and lower initial loading rate than the barefoot condition. The shod condition showed a significant larger ankle joint angle at initial ground contact, smaller knee joint angle between the second peak GRF and take-off as well as smaller foot strike angle at both initial ground contact and take-off than the barefoot condition. There were significant correlations between relative differences in ankle joint at the initial ground contact and relative differences in the initial loading rate. The muscle activity of all muscles during foot ground contact did not differ between two conditions; however, in the shod condition, muscle activation of 150 ms before foot ground contact was significantly higher in the rectus femoris, whereas it was lower in the biceps femoris and tibialis anterior muscles than the barefoot condition. These results indicate that wearing shoes alternates the GRF variables at initial ground contact, joint kinematics at the ground contact and muscle activation before foot ground contact during a drop jump, suggesting that the effects of wearing shoes on drop jump training differ from being barefoot.     

Effects of medially posted insoles on foot and lower limb mechanics across walking and running in overpronating men

Anti-pronation orthoses, like medially posted insoles (MPI), have traditionally been used to treat various of lower limb problems. Yet, we know surprisingly little about their effects on overall foot motion and lower limb mechanics across walking and running, which represent highly different loading conditions. To address this issue, multi-segment foot and lower limb mechanics was examined among 11 overpronating men with normal (NORM) and MPI insoles during walking (self-selected speed 1.70 ± 0.19 m/s vs 1.72 ± 0.20 m/s, respectively) and running (4.04 ± 0.17 m/s vs 4.10 ± 0.13 m/s, respectively). The kinematic results showed that MPI reduced the peak forefoot eversion movement in respect to both hindfoot and tibia across walking and running when compared to NORM (p < 0.05–0.01). No differences were found in hindfoot eversion between conditions. The kinetic results showed no insole effects in walking, but during running MPI shifted center of pressure medially under the foot (p < 0.01) leading to an increase in frontal plane moments at the hip (p < 0.05) and knee (p < 0.05) joints and a reduction at the ankle joint (p < 0.05). These findings indicate that MPI primarily controlled the forefoot motion across walking and running. While kinetic response to MPI was more pronounced in running than walking, kinematic effects were essentially similar across both modes. This suggests that despite higher loads placed upon lower limb during running, there is no need to have a stiffer insoles to achieve similar reduction in the forefoot motion than in walking.     

Walking slope and heavy backpack loads affect torso muscle activity and kinematics

The independent effects of sloped walking or carrying a heavy backpack on posture and torso muscle activations have been reported. While the combined effects of sloped walking and backpack loads are known to be physically demanding, how back and abdominal muscles adapt to walking on slopes with heavy load is unclear. This study quantified three-dimensional pelvis and torso kinematics and muscle activity from longissimus, iliocostalis, rectus abdominis, and external oblique during walking on 0° and ± 10° degree slopes with and without backpack loads using two different backpack configurations (hip-belt assisted and shoulder-borne). Iliocostalis activity was greater during downhill and uphill compared to level walking, but longissimus was only greater during uphill. Rectus abdominis activity was greater during downhill and uphill compared to level, while external oblique activity decreased as slopes progressed from down to up. Longissimus, but not iliocostalis, activity was reduced during both backpack configurations compared to walking with no pack. Hip-belt assisted load carriage required less rectus abdominis activity compared to using shoulder-borne only backpacks; however, external oblique was not influenced by backpack condition. Our results revealed different responses between iliocostalis and longissimus, and between rectus abdominis and external obliques, suggesting different motor control strategies between anatomical planes.     

Assessing the longitudinal structure of the early hominid foot: A two-dimensional architecture analysis

Early hominid feet are often very fragmentary preserved and their architectural approaches stayed limited and subject to controversy. This study proposes an architectural analysis of the primate foot realised on dislocated skeleton. It is based on the angular analysis of geometrical relationships between the joint areas. We investigate the longitudinal structure of the primate foot and we present the results concerning someAustralopithecus afarensis specimens from Hadar (Ethiopia) and theHomo habilis Olduvai Hominid 8 foot (Tanzania). The architectural analysis argues for the lack of a longitudinal medial arch inA. afarensis, their joints being in neutral position. On the contrary, the more recent OH8 specimen is arched both medially and laterally.     

Trunk kinematic,kinetic, and neuro-muscular response to foot center of pressure translation along the medio-lateral foot axis during gait

Footwear devices that shift foot center of pressure (COP), thereby impacting lower-limb biomechanics to produce clinical benefit, have been studied regarding degenerative diseases of knee and hip joints, exhibiting evidence of clinical success. Ability to purposefully affect trunk biomechanics has not been investigated for this type of footwear. Fifteen healthy young male subjects underwent gait and electromyography analysis using a biomechanical device that shifts COP via moveable convex elements attached to the shoe sole. Analyses were performed in three COP configurations for pairwise comparison: (1) neutral (control) (2) laterally deviated, and (3) medially deviated. Sagittal and frontal-plane pelvis and spine kinematics, external oblique activity, and frontal and transverse-plane lumbar moments were affected by medio-lateral COP shift. Transverse-plane trunk kinematics, activity of the lumbar longissimus, latissimus dorsi, rectus abdominus, and quadratus lumborum, and sagittal-plane lumbar moment, were not significantly impacted. Two linear mixed effects models assessed predictive impact of (I) COP location, and (II) trunk kinematics and neuromuscular activity, on the significant lumbar moment parameters. The COP was a significant predictor of all modeled frontal and transverse-plane lumbar moment parameters, while pelvic and spine rotation, and lumbar longissimus activity were significant predictors of one frontal-plane lumbar moment parameter. Model results suggest that, although trunk biomechanics and muscle activity were altered by COP shift, COP offset influences lumbar kinetics directly, or via lower-limb changes not assessed in this study, but not by means of alteration of trunk kinematics or muscle activity. Further study may reveal implications in treatment of low back pain.     

Age-related,interindividual, and right/left differences in anterior-posterior foot pressure ratio in preschool children

Background

This study aimed to examine age-related, interindividual, and right/left differences in anterior-posterior foot pressure ratio in 764 preschool children (364 boys and 400 girls) aged 3.5-6.5 years.

Methods

Subjects maintained an upright standing posture for 10 seconds on the Footview Clinic, an instrument designed to calculate the anterior-posterior foot pressure ratio. The ratio of anterior foot pressure in each subject’s right and left feet was selected as a variable, and the mean of a 10 s measurement was used for analysis.

Results

The ratio of anterior foot pressure was significantly larger in the right foot than in the left foot. With regard to age, the ratio of anterior foot pressure was significantly larger in children aged over 4.5 years than in children aged 3.5 years. It was also larger in children aged 6 and 6.5 years than in children aged 4 years. Interindividual differences in variables were large, and coefficients of variance were highest in children aged 3.5 years and lowest in children aged 6.5 years.

Conclusions

In conclusion, anterior foot pressure increases with age in preschool children. Interindividual differences in anterior foot pressure are large and tend to decrease with age. Furthermore, the anterior foot pressure is slightly higher in the right foot than in the left foot. These results will be useful for various studies, such as examining relationships between the anterior-posterior foot pressure ratio and factors, such as untouched toes, physical fitness, and level of exercise.