Adhesion and growth of HUVEC endothelial cells on films of enzymatically functionalized chitosan with phenolic compounds

Human Umbilical Vein Endothelial Cell (HUVEC) growth on chitosan films and its enzymatically functionalized derivatives films with ferulic acid (FA) and ethyl ferulate (EF) was assessed by evaluating cell adhesion, morphology and cell viability. The results indicated that chitosan derivative films improved protein adsorption properties compared to chitosan films. The HUVEC cell morphology showed well attachment and spread phenotype on chitosan derivative films compared to those growing on chitosan films which did not spread and remained round. Evaluation of cell viability revealed improvement of cell adhesion on chitosan derivative films compared to chitosan film depending on the quantity of oxidized phenols grafted on chitosan. In addition, FA-/EF-chitosan films allowed almost similar cell adhesion. Furthermore, cell adhesion was increased with the film thickness. These results suggested that the oxidized phenols grafting on chitosan is a promising process to enhance cell adhesion, growth and creating useful functional biomaterials.     

Surface modification of chitosan films. Effects of hydrophobicity on protein adsorption

The surface of chitosan films was modified using acid chloride and acid anhydrides. Chemical composition at the film surface was analyzed by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). ATR-FTIR data verified that the substitution took place at the amino groups of chitosan, thus forming amide linkages, and the modification proceeded to the depth at least 1 microm. Choices of molecules substituted at the amino groups of the glucosamine units did affect the hydrophobicity of the film surface, as indicated by air-water contact angle analysis. The surface became more hydrophobic than that of non-modified film when a stearoyl group (C(17)H(35)CO-) was attached to the films. The reaction of chitosan films with succinic anhydride or phthalic anhydride, however, produced more hydrophilic films. Selected modified films were subjected to protein adsorption study. The amount of protein adsorbed, determined by bicinchoninic acid (BCA) assay, related to the types of attached molecules. The improved surface hydrophobicity affected by the stearoyl groups promoted protein adsorption. In contrast, selective adsorption behavior was observed in the case of the chitosan films modified with anhydride derivatives. Lysozyme adsorption was enhanced by H-bonding and charge attraction with the hydrophilic surface. While the amount of albumin adsorbed was decreased possibly due to negative charges that gave rise to repulsion between the modified surface and albumin. This study has demonstrated that it is conceivable to fine-tune surface properties which influence its response to bio-macromolecules by heterogeneous chemical modification.     

Growth of human mesenchymal stem cells (MSCs) on films of enzymatically modified chitosan

Mesenchymal stem cells (MSCs) are known to be an attractive cell source for tissue engineering and regenerative medicine. One of the main limiting steps for clinical use or biotechnological purposes is the expansion step. The research of compatible biomaterials for MSCs expansion is recently regarded as an attractive topic. The aim of this study was to create new functional biomaterial for MSCs expansion by evaluating the impact of chitosan derivative films modified by enzymatic approach. First, chitosan particles were enzymatically modified with ferulic acid (FA) or ethyl ferulate (EF) under an eco‐friendly procedure. Then, films of chitosan and its modified derivatives were prepared and evaluated by physicochemical and biological properties. Results showed that the enzymatic grafting of FA or EF onto chitosan significantly increased hydrophobic and antioxidant properties of chitosan films. The MSCs cell viability on chitosan derivative films also increased depending on the film thickness and the quantity of grafted phenols. Furthermore, the cytotoxicity test showed the absence of toxic effect of chitosan derivative films towards MSCs cells. Cell morphology showed a well attached and spread phenotype of MSCs cells on chitosan derivative films. On the other hand, due to the higher phenol content of FA‐chitosan films, their hydrophobic, antioxidant properties and cell adhesion were improved in comparison with those of EF‐chitosan films. Finally, this enzymatic process can be considered as a promising process to favor MSCs cell growth as well as to create useful biomaterials for biomedical applications especially for tissue engineering. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:491–500, 2016     

Mechanical properties of chitosan/bamboo charcoal composite films made with normal and surface oxidized charcoal

Chitosan/bamboo charcoal composite films were prepared by blending chitosan with either virgin bamboo charcoal or bamboo charcoal modified by nitric acid oxidation to provide more hydrophilic regions on the bamboo charcoal surface. Investigation of the physical properties of these composite films revealed that the tensile strength and Young’s modulus of the chitosan films were enhanced in a dose-dependent manner by the inclusion of modified bamboo charcoal at up to 1% (w/w), whilst the elongation at break was increased by inclusion of modified bamboo charcoal at up to 0.5% (w/w). In contrast, chitosan composites with virgin bamboo charcoal at up to 0.5% or 1.0% (w/w) showed no enhancement of the tensile strength or Young’s modulus, respectively, and both parameters were reduced with higher levels of virgin bamboo charcoal. Oil, and especially water, absorption of the composite films displayed a marked and dose-dependent increase compared to those of the pure chitosan film.     

A chemical surface modification of chitosan by glycoconjugates to enhance the cell-biomaterial interaction

The use of wheat germ agglutinin (WGA), a lectin molecule, to modify chitosan and enhance the cell-biomaterial interaction was examined. The percentage of living fibroblast cells on the surfaces of tissue culture polystyrene (TCPS) control, WGA-modified chitosan, and unmodified chitosan films increased to 99%, 99%, and 85%, respectively, after seeding for 48 h. DNA staining revealed that a portion of fibroblasts cultivated on chitosan films( )were undergoing apoptosis. In contrast, fibroblasts growing on WGA-modified chitosan film surfaces did not show any indication of apoptosis. The number of fibroblast cells was the highest on the WGA-modified chitosan surfaces, followed by the TCPS and unmodified chitosan surfaces. This WGA-mediated enhancement on the fibroblast cell-biomaterial interaction was cell type dependent. Other types of cells may need different lectin molecules for enhanced interaction with biomaterials. Further, the evaluation of the heat shock protein (HSP) mRNA expression indicated that HSP 90 expression was increased in the fibroblast cells cultivated on chitosan films and decreased to basal levels on the WGA-modified chitosan films. Taken together, our data suggest that the use of WGA and other lectin molecules to enhance the cell-biomaterial interaction via oligosaccharide-mediated cell adhesion is a promising way to improve cell adhesion and proliferation, the two key issues in tissue engineering.     

Covalent immobilization of chitosan and heparin on PLGA surface

Chitosan and heparin were covalently immobilized onto a poly(lactic acid-co-glycolic acid) (PLGA) surface using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC), N-hydroxysuccinimide (NHS) in a 2-morpholinoethane sulfonic acid (MES) buffer system. The properties of the modified PLGA surface and the control were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The water contact angle of the modified film was greatly decreased and the element content on the surface of the films changed correspondingly. Platelet adhesion assay showed that blood compatibility of the chitosan/heparin modified film was improved while hepatocyte culture indicated that the cell compatibility of the modified film was enhanced.     

Preparation of N-vanillyl chitosan and 4-hydroxybenzyl chitosan and their physico-mechanical, optical, barrier, and antimicrobial properties

Chitosan derivatives such as N-vanillyl chitosan and 4-hydroxybenzyl chitosan were prepared by reacting chitosan with 4-hydroxy-3-methoxybenzaldehyde (vanillin) and 4-hydroxybenzaldehyde. Amino groups on chitosan reacts with these aldehydes to form a Schiff base intermediate, which is later on converted into N-alkyl chitosans by reduction with sodium cyanoborohydride. The chemical reaction was monitored by ¹H NMR spectroscopy and the absence of aldehydic proton at 9.83 ppm in NMR spectra was observed for both the modified chitosan derivatives confirming the reaction. Modified chitosan films were later prepared by solution casting method and their physico-mechanical, barrier, optical and thermal properties were studied. The results clearly indicated significant change in tensile strength, water vapour transmission rate, and haze properties of modified chitosans. Modified chitosan films were also studied for their antimicrobial activity against Aspergillus flavus. The results showed a marked reduction of aflatoxins produced by the fungus in the presence of the N-vanillyl chitosan and 4-hydroxybenzyl chitosan film discs to 98.9% and non-detectable levels, respectively.     

Mechanical, physicochemical and color properties of chitosan based-films as a function of Aloe vera gel incorporation

The objective of the present study was to investigate the effect of Aloe vera gel incorporation at different proportions on chitosan-based films. Consequently, the thickness of films was affected significantly by the addition of the gel and decreased from F0 (plain chitosan film) to F50 (the film containing 50% gel). The gel incorporation did not have a considerable effect on water vapor permeability (WVP); however, a significant difference was observed for F50. Addition of the gel significantly improved the water solubility (WS), wherein the F10 (the film with 10% of gel) showed the lowest. All mechanical properties increased by introducing the gel and, after reaching the peak for F20, started to reduce. Color properties were affected by the gel addition as the higher the gel, the darker the films. Overall, the results showed that incorporating the gel into film-forming solution of chitosan up to 20% (F20) was promising.     

Surface structure of chitosan and hybrid chitosan-amylose films-restoration of the antibacterial properties of chitosan in the amylose film

The surface structure of films prepared by casting aqueous solutions of mixtures of water soluble chitosan (WSC) and amylose as well as a fully deacetylated chitosan was studied. Zeta potential measurements indicated that the surface of WSC and fully deacetylated chitosan films is positively charged but very weakly, whereas, a film of amylose blended with WSC exhibited an obvious positive charge. X-ray photoelectron spectra of these films suggest that less amino groups are exposed on the surface of WSC and fully deacetylated chitosan films, whereas, more amino groups are exposed on the surface of a WSC film blended with amylose. A sheet structure in which free amino groups are less exposed on the surface of the film of WSC or fully deacetylated chitosan is proposed. This accounts for the loss of antibacterial activity of chitosan on the WSC film surface. When blended with amylose, the morphology of the film may be disrupted, resulting in strong antibacterial properties.     

Growth and osteogenic differentiation of adipose-derived and bone marrow-derived stem cells on chitosan and chitooligosaccharide films

Very low molecular weight chitooligosaccharide (COS, 1.4 kDa) and high molecular weight chitosan (1000 kDa) were comparatively studied in terms of physical and biological characteristics. Thin films of COS, chitosan and gelatin were prepared and crosslinked by dehydrothermal treatment at 140 °C for 24 h. COS film presented more hydrophilic property than chitosan film. Behaviors of rat adipose-derived stem cells (ASCs) and bone marrow-derived stem cells (MSCs) were investigated on COS and chitosan films, comparing to those on gelatin film. The results on cell spreading suggested that both ASCs and MSCs preferred to attach on COS film than chitosan film with 6–7 times larger cell areas. Numbers of both stem cells proliferated on COS film were approximately 3-fold higher than those on chitosan film. In addition, COS film enhanced osteogenic differentiating potential of MSCs, as observed from the alkaline phosphatase activity and calcium deposition. Therefore, in this work, COS was shown to be a more favorable material for the growth and osteogenic differentiation of both ASCs and MSCs, compared to high molecular weight chitosan.     

Photodynamic inactivation of Candida albicans using bridged polysilsesquioxane films doped with porphyrin

Novel photoactive bridged polysilsesquioxane films were prepared by doped with a porphyrin derivative. The films were formed by acid-catalyzed polycondensation reaction of a precursor of a bridged silsesquioxane, based on the reaction product of (glycidoxypropyl)trimethoxysilane with n-dodecylamine in the presence of 5-(4-carboxyphenyl)-10,15,20-tris(4-methylphenyl)porphyrin, followed by solvent evaporation. This procedure allowed obtaining flexible thin films. Absorption and fluorescence spectroscopic analysis showed the characteristic bands of the porphyrin in the visible region indicating that the photosensitizer is mainly embedded as monomer in the films. Photodynamic properties of the polymeric films were studied in solution containing photooxidizable substrates. Singlet molecular oxygen, O(2)((1)Δ(g)), production was observed by the reaction with 9,10-dimethylanthracene and 9,10-anthracenediyl-bis(methylene)dimalonic acid in different media. Also, these films photosensitized the decomposition of l-tryptophan. In vitro investigations showed that these films produce photodynamic inactivation of Candida albicans cells in aqueous suspensions and on their surfaces. These films exhibit a photosensitizing activity causing a ～2.5 log (99.7%) decrease of cellular survival after 60 min of irradiation with visible light. Also, the photocytotoxicity of the surfaces was tested under condition of microbial growth. Yeast cells exposed to the film and illuminated showed growth delay compared with controls. Studies of photodynamic action mechanism showed that the photoinactivation increased in D(2)O, while cells were protected in the presence of azide ion. In contrast, the addition of mannitol produced a negligible effect on the cellular phototoxicity. These results provide evidence that O(2)((1)Δ(g)) produced by the polymeric film doped with porphyrin can successfully inactivate C. albicans in cell suspensions and deposited on the film surface.     

Structurally colored thiol chitosan thin films as a platform for aqueous heavy metal ion detection

Thin films of the polysaccharide chitosan and several chitosan derivatives, including conjugates of l-cysteine, thioglycolic acid, and 2-iminothiolane, were produced from dilute acidic solutions. Attempts to produce a fourth conjugate using lipoic acid resulted in the synthesis of partially N-acetylated chitosan ethanoate. These biopolymer films were exposed to solutions containing 50 ppm concentrations of various metal ion and counterion analytes. Analyte-induced changes in film thicknesses and refractive indices were measured using a spectroscopic ellipsometer, and shifts in film color were quantified using a reflectance spectrometer. The modified chitosans were generally more sensitive to change in response to pure water but also showed varied response to several ions of interest, including Cr(III) and Cr(VI), Hg(II), Ni(II), and others. The potential for tuning film response was demonstrated by varying the concentration of sulfur groups in the thioglycolic acid conjugate, leading to increased specificity for Hg(II).     

Enzymatic grafting of hexyloxyphenol onto chitosan to alter surface and rheological properties

An enzymatic method to graft hexyloxyphenol onto the biopolymer chitosan was studied. The method employs tyrosinase to convert the phenol into a reactive o-quinone, which undergoes subsequent nonenzymatic reaction with chitosan. Reactions were conducted under heterogeneous conditions using chitosan films and also under homogeneous conditions using aqueous methanolic mixtures capable of dissolving both hexyloxyphenol and chitosan. Tyrosinase was shown to catalyze the oxidation of hexyloxyphenol in such aqueous methanolic solutions. Chemical evidence for covalent grafting onto chitosan was provided by three independent spectroscopic approaches. Specifically, enzymatic modification resulted in (1) the appearance of broad absorbance in the 350-nm region of the UV/vis spectra for chitosan films; (2) changes in the NH bending and stretching regions of chitosan's IR spectra; and (3) a base-soluble material with (1)H-NMR signals characteristic of both chitosan and the alkyl groups of hexyloxyphenol. Hexyloxyphenol modification resulted in dramatic changes in chitosan's functional properties. On the basis of contact angle measurements, heterogeneous modification of a chitosan film yielded a hydrophobic surface. Homogeneously modified chitosan offered rheological properties characteristic of associating water-soluble polymers.     

Effect of addition of water-soluble chitin on amylose film

Amylose films blended with chitosan, which were free from additives such as acid, salt, and plasticizer, were prepared by casting mixtures of an aqueous solution of an enzymatically synthesized amylose and that of water-soluble chitin (44.1% deacetylated). The presence of a small amount of chitin (less than 10%) increased significantly the permeability of gases (N2, O2, CO2, C2H4) and improved the mechanical parameters of amylose film; particularly, the elastic modulus and elongation of the blend films were larger than those of amylose or chitin films. No antibacterial activity was observed with either amylose or water-soluble chitin films. But amylose films having a small amount of chitin showed strong antibacterial action, suggesting a morphological change in water-soluble chitin on the film surface by blending with amylose molecule. These facts suggested the presence of a molecular complex of amylose and chitosan.     

Synthesis of methylcellulose-silver nanocomposite and investigation of mechanical and antimicrobial properties

In this paper we reported preparation of methylcellulose-silver nanocomposite films by mixing of aqueous solution of methylcellulose with silver nitrate followed by casting. The silver nanoparticles were generated in methylcellulose matrix through reduction and stabilization by methylcellulose. The surface plasmon band at 412nm indicated the formation of Ag nanoparticles. The MC-Ag nanocomposite films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR). The X-ray diffraction analysis of synthesized MC-Ag nanocomposite films revealed that metallic silver was present in face centered cubic crystal structure. Average crystallite size of silver nanocrystal was 22.7nm. The FTIR peaks of as-synthesized MC-Ag nanocomposite fully designated the strong interaction between Ag nanoparticles and MC matrix. Nano-sized silver modified methylcellulose showed enhanced mechanical properties i.e. the introduction of Ag leading to both strengthening and toughening of MC matrix. The methylcellulose-silver nanocomposite films offered excellent antimicrobial activity against various microorganisms.     

Enzymatic hydrolysis of chitosan films in water and physiological solution

It was shown that the processes of enzymatic hydrolysis of chitosan in aqueous acetic acid and on the surface of chitosan films in a solution of hyaluronidase in acetic acid are described by uniform kinetic constants. Kinetic parameters of enzymatic hydrolysis of the chitosan film samples in water and in physiological solution (Ringer–Locke’s solution) were determined. It was found that the introduction of medicinal agents and low-molecular-weight electrolytes to a chitosan-based film material reduces the rate of enzymatic hydrolysis of the films, which may indicate a possible increase in their service life when used on the wound surface.     

Effects of pH on the binding of hematoporphyrin derivative to monolayer and bilayer membranes.

The effects of pH on the binding of hematoporphyrin derivative (HpD) to monolayer and bilayer membranes have been studied. Absorption spectra of HpD bound to phosphatidylcholine (PC) liposomes indicate that there is greater binding of HpD to lipid films at acidic, tumoricidal pH conditions than at normal tissue pH. These results were found to correlate with surface pressure measurements of monolayer films formed under similar conditions. Surface potential measurements in conjunction with surface pressure measurements from monolayer films suggest that at low pH (i.e. less than or equal to 6.6) porphyrin intercalates within the lipid film to reach relatively high concentrations, while at higher pH (i.e. greater than or equal to 7.4) the porphyrin preferably adsorbs to the lipid film at the monolayer/water interface.     

Film-forming process and biocide assessment of high-molecular-weight chitosan as determined by combined ATR-FTIR spectroscopy and antimicrobial assays

This pioneering study reported about the film-forming properties of high-molecular-weight chitosan as followed in situ by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, and has implications in fields such as biomedical, pharmaceutical, packaging, and coating applications. From the results, it was observed that immediately after dissolution in an acetic acid aqueous solution and subsequent casting over the ATR crystal, the formed carboxylate antimicrobial (-NH3+ -OOCH) species are not stable in the film formulation and become reduced over time; further assays confirmed previous research, which suggested that the presence and stability of these groups is strongly dependent, among other factors, on storage conditions. As-received chitosan and chitosan neutralized in NaOH films did not exhibit biocide performance towards Staphylococcus aureus. The antimicrobial tests were also found to strongly relate the presence of a sufficient quantity of these carboxylate groups to the chitosan activity as a biocide agent. Moreover, a novel methodology based on the use of a normalized infrared band centered at 1405 cm(-1) is proposed which can be correlated with the antimicrobial character of the biopolymer.     

Microstructural imaging and characterization of the mechanical, chemical, thermal, and swelling properties of starch-chitosan blend films

Chitosan has wide range of applications as a biomaterial, but barriers still exist to its broader use due to its physical and chemical limitations. The present study evaluated the properties of the polymeric blend films obtained from chitosan and potato starch by the casting/solvent evaporation method. The swelling properties of the different films studied as a function of pH showed that the sorption ability of the blend films increased with the increasing content of starch. Fourier transform infrared (FTIR) analyses confirmed that interactions were present between the hydroxyl groups of starch and the amino groups of chitosan in the blend films while the x-ray diffraction (XRD) studies revealed the films to exhibit an amorphous character. Thermogravimetric analyses showed that in the blend films, the thermal stability increased with the increasing starch content and the stability of starch and chitosan powders reduced when they were converted to film. The differential scanning calorimetry (DSC) studies revealed an endotherm corresponding to water evaporation around 100 degrees C in all the films and an exotherm, corresponding to the decomposition in the chitosan and blend films. Scanning electron microscopy (SEM) observations indicated that the blend films were less homogenous and atomic force microscopy (AFM) studies revealed the chitosan films to be smooth and homogenous, while the starch films revealed characteristic granular pattern. The blend films exhibited an intermediate character with a slight microphase separation. The starch-chitosan blend films exhibited a higher flexibility and incorporation of potato starch into chitosan films improved the percentage elongation.     

Chitosan film as rhBMP2 carrier: delivery properties for bone tissue application

Tissue engineering approaches need biomaterials with suitable properties to provide an appropriate environment for cell attachment and growth. The performance of these biomaterials can be greatly enhanced through the incorporation of bioactive agents. For this reason, we developed chitosan films with cell-attachment ability, rhBMP-2 carrier capacity, and good in vivo performance, and we employ them as covering for implantable materials. In this work, we have tried to explain how the rh-BMP2 is delivered to the surroundings from the development chitosan films. Protein diffusion from film, film stability versus in vitro dissolution, and biodegradation were evaluated to study rhBMP-2 delivery. Our results show that chitosan film has sufficiently good features to be used as an rhBMP-2 carrier. A low diffusion rate was observed, which was sufficient to quickly induce an in vitro differentiation stimulus, although heavily activated films retain more than 80-85% of the protein on the film. On the other hand, we estimated that chitosan film dissolution due to initial acidification in the wound environment is no more than 15-20%. We also estimated chitosan film response to lysozyme and concluded that degradation via this process proceeded at a slow kinetic rate. In addition, rhBMP-2 in vitro activity after film processing, as well as in vivo film behavior, were studied. We confirm that rhBMP-2 remains active on the film and after release, both in vitro and in vivo. These results support the conclusion that the developed chitosan film allows sustained release of the rhBMP-2 osteoinductive protein and could be used as an activated coat for implant and surgical prosthesis.