Stomach-specific drug delivery of 5-fluorouracil using floating alginate beads

A multiple-unit-type oral floating dosage form (FDF) of 5-fluorouracil (5-FU) was developed to prolong gastric residence time, target stomach cancer, and increase drug bioavailability. The floating bead formulations were prepared by dispersing 5-FU together with calcium carbonate into a mixture of sodium alginate and hydroxypropyl methylcellulose solution and then dripping the dispersion into an acidified solution of calcium chloride. Calcium alginate beads were formed, as alginate undergoes ionotropic gelation by calcium ions and carbon dioxide develops from the reaction of carbonate salts with acid. The evolving gas permeated through the alginate matrix, leaving gas bubbles or pores, which provided the beads buoyancy. The prepared beads were evaluated for percent drug loading, drug entrapment efficiency, image, surface topography, buoyancy, and in vitro release. The formulations were optimized for different weight ratios of gas-forming agent and sodium alginate. The beads containing higher amounts of calcium carbonate demonstrated instantaneous, complete, and excellent floating ability over a period of 24 hours. The optimized formulation was subjected to in vivo antitumor studies to check the therapeutic efficacy of the floating dosage forms containing 5-FU against benzo(a)pyrene-induced stomach tumors in albino female mice (Balb/C strain). The multiple-bead FDF was found to reduce the tumor incidence in mice by 74%, while the conventional tablet dosage form reduced this incidence by only 25%. Results indicate that FDF performed significantly better than the simple tablet dosage form. Published: June 22, 2007     

Encapsulation of the peptide Ac-Glu-Thr-Lys-Thr-Tyr-Phe-Trp-Lys-NH2 into polyvinyl alcohol biodegradable formulations—Effect of calcium alginate

It has been recently reported that the peptide Ac-Glu-Thr-Lys-Thr-Tyr-Phe-Trp-Lys-NH₂, analogue of the Glu1811-Lys1818 region of A3 light chain of blood coagulation factor VIII, presents in vitro significant anticoagulant activity. The encapsulation of this peptide into different polyvinyl alcohol formulations is examined here. The formulations were prepared using polyvinyl alcohol cross-linked with either boric acid or glutaraldehyde, giving a series of twelve different hydrogels. In case of PVA-boric acid method, a small percentage of sodium alginate was used in order to avoid bead's agglomeration. In that case, the most efficient encapsulation of the octapeptide (74%) was achieved with 0.2% (w/w) sodium alginate. It was also observed that the increase in sodium alginate percentage leads to beads with increased peptide release time, ranging from 60 to 90 min at 0.02% and 1% (w/w) sodium alginate respectively. The water holding of the PVA gels was estimated to be 27% regardless of the cross-linking reagent used, while it was increased with increasing sodium alginate concentration and reached about 60% for 1% sodium alginate. The longer octapeptide release, at 120 min, was observed with PVA-glutaraldehyde hydrogel, with encapsulation efficiency comparable to those obtained with boric acid, indicating that this hydrogel may be further used in drug delivery systems.     

Preparation and evaluation of chitosan/carrageenan beads for controlled release of sodium diclofenac

The polyelectrolyte complex (PEC) hydrogel beads based on chitosan (CS) and carrageenan (CR) have been studied as a controlled release device to deliver sodium diclofenac (DFNa) in the simulated gastrointestinal condition. Various factors potentially influencing the drug release (ie, CS/CR proportion, DFNa content, types and amount of cross-linking agents) were also investigated. The optimal formulation was obtained with CS/CR proportion of 2/1 and 5% (wt/vol) DFNa. The controlled release of the drug from this formulation was superior to other formulations and was able to maintain the release for approximately 8 hours. Upon cross-linking with glutaric acid and glutaraldehyde, the resulting beads were found to be more efficient for prolonged drug release than their non-cross-linking counterparts. The bead cross-linked with glutaraldehyde was able to control the release of the drug over 24 hours. The difference in the drug release behavior can be attributed to the differences in ionic interaction between the oppositely charged ions and to the concentrations of the drug within the beads, which depends on the compositions of the formulation and the pH of the dissolution medium. The release of drug was controlled by the mechanism of the dissolution of DFNa in the dissolution medium and the diffusion of DFNa through the hydrogel beads.     

Design of innovated lipid-based floating beads loaded with an antispasmodic drug: in-vitro and in-vivo evaluation

Context: Drotaverine hydrochloride (DRT) is used to treat gastrointestinal spasms accompanied with diarrhoea. Hence, the drug suffers from brief residence in the highly moving intestine during diarrhoea which leads to poor bioavailability and frequent dosing.

Objective: This study aimed to extend DRT residence in the stomach.

Methods: Calcium alginate floating beads were prepared using sodium alginate, isopropylmyristate (oil), and Gelucire® 43/01 (lipid) adopting emulsion gelation technique. The beads were evaluated for their floating ability, DRT entrapment efficiency and in-vitro release. Gelucire® 43/01 /oil-based beads of the selected formula were coated using ethylcellulose and different plasticizers as polyethylene glycol 400 and triethyl citrate to retard the drug release. The coated beads were re-characterized. Finally, the best formulae were investigated for their in-vivo floating ability in dogs besides their delivery to the systemic circulation compared to drug powder in human volunteers.

Results: Incorporation of Gelucire® 43/01 to oil-based beads enhanced the in-vitro performance of the beads. Coated beads prepared using drug:sodium alginate ratio of 1:3 (w/w), 20% (w/v) isopropylmyristate, 20% (w/v) Gelucire® 43/01 showed promising in-vitro performance. The beads floated for 12?h in the dogs’ stomach and produced three-fold increase of the total amount of DRT absorbed within 24?h compared to that of DRT powder.

Conclusions: Gelucire® 43/01 /isopropylmyristate-based calcium alginate floating beads coated with ethylcellulose using either PEG 400 or TEC as plasticizers proved to be a successful dosage form in extending DRT release.     

Biodegradable polymer based encapsulation of neem oil nanoemulsion for controlled release of Aza-A

Azadirachtin a biological compound found in neem have medicinal and pesticidal properties. The present work reports on the encapsulation of neem oil nanoemulsion using sodium alginate (Na-Alg) by cross linking with glutaraldehyde. Starch and polyethylene glycol (PEG) were used as coating agents for smooth surface of beads. The SEM images showed beads exhibited nearly spherical shape. Swelling of the polymeric beads reduced with coating which in turn decreased the rate of release of Aza-A. Starch coated encapsulation of neem oil nanoemulsion was found to be effective when compared to PEG coated encapsulation of neem oil nanoemulsion. The release rate of neem Aza-A from the beads into an aqueous environment was analyzed by UV-visible spectrophotometer (214nm). The encapsulated neem oil nanoemulsion have the potential for controlled release of Aza-A. Neem oil nanoemulsion encapsulated beads coated with PEG was found to be toxic in lymphocyte cells.     

Immobilization of Candida rugosa lipase by cross-linking with glutaraldehyde followed by entrapment in alginate beads

Candida rugosa lipase was immobilized by first cross-linking with glutaraldehyde and then entrapping in calcium alginate beads. The presence of 2-propanol during cross-linking markedly improved the enzyme activity and activity recovery. Maximal enzyme activity (2.1?mmol?h^?1?g^?1 immobilized conjugate, wet weight) and activity recovery (117%) were observed at 30% (v/v) 2-propanol for hydrolysis of olive oil, which were 1.7 and 2.0 times higher than those of the immobilized enzyme prepared in the absence of 2-propanol. The half-life of the immobilized lipase prepared by entrapment after cross-linking in 30% 2-propanol was 1.6 times higher than that prepared by entrapment of the native lipase without cross-linking and 2-propanol pretreatment. The enantioselectivity of the former was 11 times higher than that of the latter for hydrolysis of racemic ketoprofen ethyl ester.     

Covalent stabilization of alginate gel for the entrapment of living whole cells

Summary Three methods were developed for preparing alginate gels containing cells that are stable in phosphate containing media. In Method I preformed alginate beads containing entrapped cells were treated with polyethyl eneimine followed by glutaraldehyde. In Method II alginate sol was treated with a carbodiimide and N-hydroxysuccinimide (to form active esters), mixed with cells and extruded into calcium chloride solution. The beads were subsequently cross-linked with polyethyleneimine. In Method III alginate so] was treated with periodate (to form aldehyde groups), mixed with cells and extruded into calcium chloride solution. The beads were subsequently cross-linked with polyethyleneimine. Saccharomyces cerevisiae cells, immobilized in such stabilized gels, exhibited almost the same fermentation activity as the standard preparation. The viability of the immobilized cells was retained during the stabilization procedure as judged from their ability to multiply in the presence of nutrients.The preparations remained stable in phosphate buffer for at least ten days without substantial release of cells. The extent of cross-linking was controlled by varying the time and the concentration of reactants, thus giving preparations ranging from beads with a thin stabilized shell to beads homogeneously stabilized.     

Entrapment of biological control agents applied to entomopathogenic nematodes

Summary Hydrogels of alginate, phospho guar gum, carboxymethyl guar gum, k-carrageenan and cellulose sulphate, respectively were tested to find easily redissolvable gels. The entomopathogenic nematode, Heterorhabditis sp., was entrapped in calcium alginate beads, calcium alginate hollow spheres and foils made from different hydrogels. Emigration from calcium alginate beads after 7 days of storage was 100 % at room temperature and was lowered to 6 % at 6 °C, whereas no emigration from calcium alginate hollow spheres was found at either temperature. Highly concentrated polymer foils produced on gauze showed reduced emigration with a survival of 80 % after 24 h compared to foils produced on glass slides. Calcium alginate beads can be used for a controlled release of the nematode into the environment, while hollow spheres and foils are suitable for storage.Dedicated to Prof. Dr. F. Wagner on the occasion of his 65th birthday     

Papain entrapment in alginate beads for stability improvement and site-specific delivery: Physicochemical characterization and factorial optimization using neural network modeling

This work examines the influence of various process parameters (like sodium alginate concentration, calcium chloride concentration, and hardening time) on papain entrapped in ionotropically cross-linked alginate beads for stability improvement and site-specific delivery to the small intestine using neural network modeling. A 3³ full-factorial design and feed-forward neural network with multilayer perceptron was used to investigate the effect of process variables on percentage of entrapment, time required for 50% and 90% of the enzyme release, particle size, and angle of repose. Topographical characterization was conducted by scanning electron microscopy, and entrapment was confirmed by Fourier transform infrared spectroscopy and differential scanning calorimetry. Times required for 50% (T₅₀) and 90% (T₉₀) of enzyme release were increased in all 3 of the process variables. Percentage entrapment and particle size were found to be directly proportional to sodium alginate concentration and inversely proportional to calcium chloride concentration and hardening time, whereas angle of repose and degree of cross-linking showed exactly opposite proportionality. Beads with >90% entrapment and T₅₀ of <10 minutes could be obtained at the low levels of all 3 of the process variables. The inability of beads to dissolve in acidic environment, with complete dissolution in buffer of pH≥6.8, showed the suitability of beads to release papain into the small intestine. The shelf-life of the capsules prepared using the papain-loaded alginate beads was found to be 3.60 years compared with 1.01 years of the marketed formulation. It can be inferred from the above results that the proposed methodology can be used to prepare papain-loaded alginate beads for stability improvement and site-specific delivery. Published: September 30, 2005     

Evaluation of Chitosan/Alginate Beads Using Experimental Design: Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> Characterization

Bovine serum albumin-loaded beads were prepared by ionotropic gelation of alginate with calcium chloride and chitosan. The effect of sodium alginate concentration and chitosan concentration on the particle size and loading efficacy was studied. The diameter of the beads formed is dependent on the size of the needle used. The optimum condition for preparation alginate–chitosan beads was alginate concentration of 3% and chitosan concentration of 0.25% at pH 5. The resulting bead formulation had a loading efficacy of 98.5% and average size of 1,501 μm, and scanning electron microscopy images showed spherical and smooth particles. Chitosan concentration significantly influenced particle size and encapsulation efficiency of chitosan–alginate beads (p < 0.05). Decreasing the alginate concentration resulted in an increased release of albumin in acidic media. The rapid dissolution of chitosan–alginate matrices in the higher pH resulted in burst release of protein drug.     

A novel multiple-unit sustained release indomethacin-hydroxypropyl methylcellulose delivery system prepared by ionotropic gelation of sodium alginate at elevated temperatures

A multiple-unit indomethacin delivery system based on hydroxypropyl methylcellulose as the hydrophilic carrier material was developed by a novel technique using the insolubility of the cellulose ether at elevated temperatures and the ionotropic gelation of the polysaccharide, sodium alginate with calcium ions. Spherical beads were prepared by dropping hot sodium alginate solution (60°C) containing dispersed drug and dispersed hydroxypropyl methylcellulose into the heated calcium chloride solution. Beads with a combined hydroxypropyl methylcellulose-indomethacin solids content of up to 98% could be prepared because of the processing of a hydroxypropyl methylcellulose dispersion rather than a solution. The beads were characterized by dissolution and scanning electron microscopy. The drug release was controlled by the viscosity grade of the hydroxypropyl methylcellulose and the rate of polymer gelation, and could be sustained over an 8-h period.     

Hydrophobic modification of sodium alginate and its application in drug controlled release

Sodium alginate was hydrophobically modified by coupling of polybutyl methacrylate onto the alginate. The polybutyl methacrylate was previously prepared through polymerization of butyl methacrylate in the presence of 2-amino-ethanethiol as a chain transfer agent. The structure of the product was characterized by Fourier-transformed infrared spectrometry, nuclear magnetic resonance (¹HNMR) and thermogravimetry. The result of fluorescence analysis showed that the hydrophobicity of the modified alginate was obviously increased. The modified alginate conjugate was used for immobilization of bovine serum albumin in the presence of calcium chloride. In addition, the release behavior of the drug-loaded alginate in deionized water and Tris–HCl buffer solution (pH 7.2) was investigated. It was found that the modified sodium alginate possessed prolonged release behavior compared to unmodified sodium alginate, and it had potential application in controlled release as a drug carrier.     

Immobilization of Mucor javanicus lipase by entrapping in alginate-silica hybrid gel beads with simultaneous cross-linking with glutaraldehyde

Mucor javanicus lipase was entrapped in alginate-silica hybrid gel beads with or without simultaneous cross-linking with glutaraldehyde. The activity and recovery of activity on immobilization of the enzyme entrapped in the hybrid beads were 1.4 and 1.7 times higher than those of the enzyme entrapped in the simple alginate beads. Entrapment with simultaneous cross-linking in the hybrid beads further improved the enzyme activity (1.6 times) and activity recovery (1.7 times) compared to those of the enzyme entrapped in the hybrid beads without simultaneous cross-linking. The leakage of the enzyme entrapped in the hybrid beads with simultaneous cross-linking was only 50% that of the enzyme entrapped in the simple alginate beads.     

Immobilization of Alginate-Encapsulated Bacillus thuringiensis var. israelensis Containing Different Multivalent Counterions for Mosquito Control

Immobilized techniques have been used widely for the controlled release formulation of mosquitoes. Among the microbial formulations, polymeric matrices play an important role in the controlled release of microbial pesticide at rates sufficiently effective to kill mosquitoes in the field. The advantage of these matrices is that they enhance the stability of both spores and toxin against pH, temperature variations, and UV irradiation. The disadvantage of using calcium alginate beads is that they are unstable upon contact with phosphate of potassium or sodium ions rich in the mosquito habitats. To overcome these problems, attempts were made to encapsulate Bacillus thuringiensis var. israelensis within alginate by using different multivalent counterions, namely, calcium chloride, zinc sulfate, copper sulfate, cobalt chloride, and ferric chloride, and the beads formed were tested for its mosquito larvicidal activity. Among all the beads tested, zinc alginate beads resulted in maximum larvicidal activity of 98% (+/-1.40 SE) against Culex quinquefasciatus IIIrd instar larvae and maximum spore count of 3.36 x 10(5) (+/-5291.50 SE) CFU/ml. Zinc alginate beads maintained their structure for up to 48 h when shaken vigorously on a rotary shaker at 180 rpm in the presence of 10 mM potassium phosphate buffer (pH 6.8 +/- 0.1). In conclusion, our results suggest that the use of zinc sulfate as counterions to encapsulate B. thuringiensis var. israelensis within alginate may be a potent mosquito control program in the habitats where more phosphate ions are present.     

Preparation and characterization of a novel pH-sensitive chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate composite hydrogel bead for controlled release of diclofenac sodium

A series of pH-sensitive composite hydrogel beads composed of chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate (CTS-g-PAA/APT/SA) was prepared as drug delivery matrices crosslinked by Ca²⁺ owing to the ionic gelation of SA. The structure and surface morphology of the composite hydrogel beads were characterized by FTIR and SEM, respectively. pH-sensitivity of these composite hydrogels beads and the release behaviors of drug from them were investigated. The results showed that the composite hydrogel beads had good pH-sensitivity. The cumulative release ratios of diclofenac sodium (DS) from the composite hydrogel beads were 3.76% in pH 2.1 solution and 100% in pH 6.8 solutions within 24 h, respectively. However, the cumulative release ratio of DS in pH 7.4 solution reached 100% within 2 h. The DS cumulative release ratio reduced with increasing APT content from 0 to 50 wt%. The drug release was swelling-controlled at pH 6.8.     

Investigation of factors influencing drug release using calcium alginate polymer

The effects of mixing, the sodium alginate concentration, and calcium chloride concentration on the release of sulphamethoxazole (model drug) impregnated in calcium alginate beads were investigated and evaluated. The release behaviour of the sulphamethoxazole from the calcium alginate beads was studied in a 0.1N HCl aqueous solution at 37v°C. The release rate of the sulphamethoxazole depends heavily on the type of mixers during the formation of the drug-alginate beads. The highest release rate was achieved when four-bladed rectangular agitator was used while the lowest release was achieved when magnetic stirrer was used. The amount of the released sulphamethoxazole varies slightly with the variation of the alginate concentration. The total release of sulphamethoxazole when 1% w/v solution of sodium alginate was used found to be 80% of the total drug content while 72% and 68% of the total drug content for 1.5% and 2% sodium alginate solutions. Three different calcium chloride concentrations were used (i.e., 5%, 10%, and 15% CaCl₂). The effect of the calcium chloride concentration on the release of the sulphamethoxazole is very pronounced.     

Novel composite blend microbeads of sodium alginate coated with chitosan for controlled release of amoxicillin

Composite blend microbeads of sodium alginate (NaAlg) with sodium carboxymethyl cellulose (NaCMC) containing magnesium aluminum silicate (MAS) particles and enteric coated with chitosan have been prepared to achieve controlled release (CR) of amoxicillin in stomach environment. The composite beads have been characterized by X-ray diffraction (XRD) to study drug distribution, DSC for understanding thermal stability and Fourier transform infrared (FTIR) spectroscopy to investigate chemical interactions as well as to assess the structure of the drug-loaded formulations. Surface morphology of the beads was investigated by scanning electron microscopy (SEM). The size distribution of beads loaded with drug as studied by particle size analyzer was in the range of 745-889 μm. The beads exhibited quite widely varying encapsulation efficiencies from 52 to 92%. Equilibrium swelling of the beads measured in water and in vitro release of amoxicillin in pH 1.2 medium suggests that drug release depends on polymer blend composition, concentration of MAS and extent of enteric coating.     

Beaded matrices from cross-linked alginate for affinity and ion exchange chromatography of proteins

Summary To obtain a low cost, beaded chromatographic matrix, calcium alginate beads were cross-linked with epichlorohydrin, and calcium was removed by sodium citrate treatment. The cross-linking reaction for obtaining stable beads was optimized. For purification of haemoglobin by ion exchange, cross-linked calcium-free alginate beads have a q_max of 60 mg/ml and a K_d of 0.02 mg/ml gel, while for affinity polygalacturonase purification K_aff was 0.007 ml/g.     

Ionotropically emulsion gelled polysaccharides beads: Preparation,in vitro and in vivo evaluation

Floating famotidine loaded mineral oil-entrapped emulsion gel (MOEG) beads were prepared by the emulsion–gelation method. Different polysaccharides (sodium alginate and pectin), oil concentrations (10%, 20% and 30% w/w) and drug:polymer (D:P) ratios (1:1, 2:1 and 3:1) were used and their influence on beads uniformity, drug entrapment efficiency (DEE) and in vitro drug release, was studied. The results clearly indicated that retardation of drug release for 4 h was achieved by the oil hydrophobic diffusional barrier, especially in the presence of the compact network of alginate beads. Calcium alginate beads containing 20% oil and 2:1 D:P ratio, showed an optimum DEE of 88.32%. When evaluated in vivo, this formula displayed superior antiulcer activity (>2) over drug suspension or marketed conventional tablets.     

Formulation and evaluation of ketorolac tromethamine-loaded albumin microspheres for potential intramuscular administration

The objective of this work was to prepare and evaluate ketorolac tromethamine-loaded albumin microspheres using a factorial design. Albumin microspheres were prepared by emulsion cross-linking method. Selected formulations were characterized for their entrapment efficiency, particle size, surface morphology, and release behavior. Analysis of variance (ANOVA) for entrapment efficiency indicated that entrapment efficiency is best fitted to a response surface linear model. From the statistical analysis it was observed that as the drug:polymer (D∶P) ratio and volume of glutaraldehyde increased, there was a significant increase in the encapsulation efficiency. Scanning electron microscopy of the microspheres revealed a spherical, nonporous and uniform appearance, with a smooth surface. Based on the entrapment efficiency and physical appearance, 9 formulations were selected for release study. The maximum particle size observed was below 40 μm. The release pattern was biphasic, characterized by an initial burst effect followed by a slow release. All selected microspheres, except those having less polymer proportion (D∶P ratio is 1∶1), exhibited a prolonged release for almost 24 hours. On comparingr ² values for Higuchi and Peppas kinetic models, different batches of microspheres showed Fickian, non-Fickian, and diffusion kinetics. The release mechanism was regulated by D∶P ratio and amount of cross-linking agent. From the experimental data obtained with respect to particle size and extent of drug relaase, it could be concluded that the prepared microspheres are useful for once-a-day intramuscular administration of ketorolac tromethamine. Published: February 23, 2007