Model‐Based Quality Assessment and Base‐Calling for Second‐Generation Sequencing Data

Summary Second‐generation sequencing (sec‐gen) technology can sequence millions of short fragments of DNA in parallel, making it capable of assembling complex genomes for a small fraction of the price and time of previous technologies. In fact, a recently formed international consortium, the 1000 Genomes Project, plans to fully sequence the genomes of approximately 1200 people. The prospect of comparative analysis at the sequence level of a large number of samples across multiple populations may be achieved within the next five years. These data present unprecedented challenges in statistical analysis. For instance, analysis operates on millions of short nucleotide sequences, or reads—strings of A,C,G, or T's, between 30 and 100 characters long—which are the result of complex processing of noisy continuous fluorescence intensity measurements known as base‐calling. The complexity of the base‐calling discretization process results in reads of widely varying quality within and across sequence samples. This variation in processing quality results in infrequent but systematic errors that we have found to mislead downstream analysis of the discretized sequence read data. For instance, a central goal of the 1000 Genomes Project is to quantify across‐sample variation at the single nucleotide level. At this resolution, small error rates in sequencing prove significant, especially for rare variants. Sec‐gen sequencing is a relatively new technology for which potential biases and sources of obscuring variation are not yet fully understood. Therefore, modeling and quantifying the uncertainty inherent in the generation of sequence reads is of utmost importance. In this article, we present a simple model to capture uncertainty arising in the base‐calling procedure of the Illumina/Solexa GA platform. Model parameters have a straightforward interpretation in terms of the chemistry of base‐calling allowing for informative and easily interpretable metrics that capture the variability in sequencing quality. Our model provides these informative estimates readily usable in quality assessment tools while significantly improving base‐calling performance.     

Enhanced Methods for Local Ancestry Assignment in Sequenced Admixed Individuals

Inferring the ancestry at each locus in the genome of recently admixed individuals (e.g., Latino Americans) plays a major role in medical and population genetic inferences, ranging from finding disease-risk loci, to inferring recombination rates, to mapping missing contigs in the human genome. Although many methods for local ancestry inference have been proposed, most are designed for use with genotyping arrays and fail to make use of the full spectrum of data available from sequencing. In addition, current haplotype-based approaches are very computationally demanding, requiring large computational time for moderately large sample sizes. Here we present new methods for local ancestry inference that leverage continent-specific variants (CSVs) to attain increased performance over existing approaches in sequenced admixed genomes. A key feature of our approach is that it incorporates the admixed genomes themselves jointly with public datasets, such as 1000 Genomes, to improve the accuracy of CSV calling. We use simulations to show that our approach attains accuracy similar to widely used computationally intensive haplotype-based approaches with large decreases in runtime. Most importantly, we show that our method recovers comparable local ancestries, as the 1000 Genomes consensus local ancestry calls in the real admixed individuals from the 1000 Genomes Project. We extend our approach to account for low-coverage sequencing and show that accurate local ancestry inference can be attained at low sequencing coverage. Finally, we generalize CSVs to sub-continental population-specific variants (sCSVs) and show that in some cases it is possible to determine the sub-continental ancestry for short chromosomal segments on the basis of sCSVs.     

Searching for SNPs with cloud computing

As DNA sequencing outpaces improvements in computer speed, there is a critical need to accelerate tasks like alignment and SNP calling. Crossbow is a cloud-computing software tool that combines the aligner Bowtie and the SNP caller SOAPsnp. Executing in parallel using Hadoop, Crossbow analyzes data comprising 38-fold coverage of the human genome in three hours using a 320-CPU cluster rented from a cloud computing service for about $85. Crossbow is available from .     

Evaluating the Coverage and Potential of Imputing the Exome Microarray with Next-Generation Imputation Using the 1000 Genomes Project

Next-generation genotyping microarrays have been designed with insights from large-scale sequencing of exomes and whole genomes. The exome genotyping arrays promise to query the functional regions of the human genome at a fraction of the sequencing cost, thus allowing large number of samples to be genotyped. However, two pertinent questions exist: firstly, how representative is the content of the exome chip for populations not involved in the design of the chip; secondly, can the content of the exome chip be imputed with the reference data from the 1000 Genomes Project (1KGP). By deep whole-genome sequencing two Asian populations that are not part of the 1KGP, comprising 96 Southeast Asian Malays and 36 South Asian Indians for which the same samples have also been genotyped on both the Illumina 2.5 M and exome microarrays, we discovered the exome chip is a poor representation of exonic content in our two populations. However, up to 94.1% of the variants on the exome chip that are polymorphic in our populations can be confidently imputed with existing non-exome-centric microarrays using the 1KGP panel. The coverage further increases if there exists population-specific reference data from whole-genome sequencing. There is thus limited gain in using the exome chip for populations not involved in the microarray design. Instead, for the same cost of genotyping 2,000 samples on the exome chip, performing whole-genome sequencing of at least 35 samples in that population to complement the 1KGP may yield a higher coverage of the exonic content from imputation instead.     

DivStat: A User-Friendly Tool for Single Nucleotide Polymorphism Analysis of Genomic Diversity

Recent developments have led to an enormous increase of publicly available large genomic data, including complete genomes. The 1000 Genomes Project was a major contributor, releasing the results of sequencing a large number of individual genomes, and allowing for a myriad of large scale studies on human genetic variation. However, the tools currently available are insufficient when the goal concerns some analyses of data sets encompassing more than hundreds of base pairs and when considering haplotype sequences of single nucleotide polymorphisms (SNPs). Here, we present a new and potent tool to deal with large data sets allowing the computation of a variety of summary statistics of population genetic data, increasing the speed of data analysis.     

Low Frequency Variants,Collapsed Based on Biological Knowledge,Uncover Complexity of Population Stratification in 1000 Genomes Project Data

Analyses investigating low frequency variants have the potential for explaining additional genetic heritability of many complex human traits. However, the natural frequencies of rare variation between human populations strongly confound genetic analyses. We have applied a novel collapsing method to identify biological features with low frequency variant burden differences in thirteen populations sequenced by the 1000 Genomes Project. Our flexible collapsing tool utilizes expert biological knowledge from multiple publicly available database sources to direct feature selection. Variants were collapsed according to genetically driven features, such as evolutionary conserved regions, regulatory regions genes, and pathways. We have conducted an extensive comparison of low frequency variant burden differences (MAF<0.03) between populations from 1000 Genomes Project Phase I data. We found that on average 26.87% of gene bins, 35.47% of intergenic bins, 42.85% of pathway bins, 14.86% of ORegAnno regulatory bins, and 5.97% of evolutionary conserved regions show statistically significant differences in low frequency variant burden across populations from the 1000 Genomes Project. The proportion of bins with significant differences in low frequency burden depends on the ancestral similarity of the two populations compared and types of features tested. Even closely related populations had notable differences in low frequency burden, but fewer differences than populations from different continents. Furthermore, conserved or functionally relevant regions had fewer significant differences in low frequency burden than regions under less evolutionary constraint. This degree of low frequency variant differentiation across diverse populations and feature elements highlights the critical importance of considering population stratification in the new era of DNA sequencing and low frequency variant genomic analyses.     

Technology-specific error signatures in the 1000 Genomes Project data

Next-generation sequencing (NGS) will likely facilitate a better understanding of the causes and consequences of human genetic variability. In this context, the validity of NGS-inferred single-nucleotide variants (SNVs) is of paramount importance. We therefore developed a statistical framework to assess the fidelity of three common NGS platforms. Using aligned DNA sequence data from two completely sequenced HapMap samples as included in the 1000 Genomes Project, we unraveled remarkably different error profiles for the three platforms. Compared to confirmed HapMap variants, newly identified SNVs included a substantial proportion of false positives (3–17%). Consensus calling by more than one platform yielded significantly lower error rates (1–4%). This implies that the use of multiple NGS platforms may be more cost-efficient than relying upon a single technology alone, particularly in physically localized sequencing experiments that rely upon small error rates. Our study thus highlights that different NGS platforms suit different practical applications differently well, and that NGS-based studies require stringent data quality control for their results to be valid.     

Drosophila Evolution over Space and Time (DEST): A New Population Genomics Resource

Drosophila melanogaster is a leading model in population genetics and genomics, and a growing number of whole-genome data sets from natural populations of this species have been published over the last years. A major challenge is the integration of disparate data sets, often generated using different sequencing technologies and bioinformatic pipelines, which hampers our ability to address questions about the evolution of this species. Here we address these issues by developing a bioinformatics pipeline that maps pooled sequencing (Pool-Seq) reads from D. melanogaster to a hologenome consisting of fly and symbiont genomes and estimates allele frequencies using either a heuristic (PoolSNP) or a probabilistic variant caller (SNAPE-pooled). We use this pipeline to generate the largest data repository of genomic data available for D. melanogaster to date, encompassing 271 previously published and unpublished population samples from over 100 locations in >20 countries on four continents. Several of these locations have been sampled at different seasons across multiple years. This data set, which we call Drosophila Evolution over Space and Time (DEST), is coupled with sampling and environmental metadata. A web-based genome browser and web portal provide easy access to the SNP data set. We further provide guidelines on how to use Pool-Seq data for model-based demographic inference. Our aim is to provide this scalable platform as a community resource which can be easily extended via future efforts for an even more extensive cosmopolitan data set. Our resource will enable population geneticists to analyze spatiotemporal genetic patterns and evolutionary dynamics of D. melanogaster populations in unprecedented detail.     

The impact of post-alignment processing procedures on whole-exome sequencing data

The use of post-alignment procedures has been suggested to prevent the identification of false-positives in massive DNA sequencing data. Insertions and deletions are most likely to be misinterpreted by variant calling algorithms. Using known genetic variants as references for post-processing pipelines can minimize mismatches. They allow reads to be correctly realigned and recalibrated, resulting in more parsimonious variant calling. In this work, we aim to investigate the impact of using different sets of common variants as references to facilitate variant calling from whole-exome sequencing data. We selected reference variants from common insertions and deletions available within the 1K Genomes project data and from databases from the Latin American Database of Genetic Variation (LatinGen). We used the Genome Analysis Toolkit to perform post-processing procedures like local realignment, quality recalibration procedures, and variant calling in whole exome samples. We identified an increased number of variants from the call set for all groups when no post-processing procedure was performed. We found that there was a higher concordance rate between variants called using 1K Genomes and LatinGen. Therefore, we believe that the increased number of rare variants identified in the analysis without realignment or quality recalibration indicated that they were likely false-positives.     

CODEX: a normalization and copy number variation detection method for whole exome sequencing

High-throughput sequencing of DNA coding regions has become a common way of assaying genomic variation in the study of human diseases. Copy number variation (CNV) is an important type of genomic variation, but detecting and characterizing CNV from exome sequencing is challenging due to the high level of biases and artifacts. We propose CODEX, a normalization and CNV calling procedure for whole exome sequencing data. The Poisson latent factor model in CODEX includes terms that specifically remove biases due to GC content, exon capture and amplification efficiency, and latent systemic artifacts. CODEX also includes a Poisson likelihood-based recursive segmentation procedure that explicitly models the count-based exome sequencing data. CODEX is compared to existing methods on a population analysis of HapMap samples from the 1000 Genomes Project, and shown to be more accurate on three microarray-based validation data sets. We further evaluate performance on 222 neuroblastoma samples with matched normals and focus on a well-studied rare somatic CNV within the ATRX gene. We show that the cross-sample normalization procedure of CODEX removes more noise than normalizing the tumor against the matched normal and that the segmentation procedure performs well in detecting CNVs with nested structures.     

An efficient and tunable parameter to improve variant calling for whole genome and exome sequencing data

Next generation sequencing (NGS) has traditionally been performed in various fields including agricultural to clinical and there are so many sequencing platforms available in order to obtain accurate and consistent results. However, these platforms showed amplification bias when facilitating variant calls in personal genomes. Here, we sequenced whole genomes and whole exomes from ten Korean individuals using Illumina and Ion Proton, respectively to find the vulnerability and accuracy of NGS platform in the GC rich/poor area. Overall, a total of 1013 Gb reads from Illumina and ~39.1 Gb reads from Ion Proton were analyzed using BWA-GATK variant calling pipeline. Furthermore, conjunction with the VQSR tool and detailed filtering strategies, we achieved high-quality variants. Finally, each of the ten variants from Illumina only, Ion Proton only, and intersection was selected for Sanger validation. The validation results revealed that Illumina platform showed higher accuracy than Ion Proton. The described filtering methods are advantageous for large population-based whole genome studies designed to identify common and rare variations associated with complex diseases.     

STORMSeq: An Open-Source,User-Friendly Pipeline for Processing Personal Genomics Data in the Cloud

The increasing public availability of personal complete genome sequencing data has ushered in an era of democratized genomics. However, read mapping and variant calling software is constantly improving and individuals with personal genomic data may prefer to customize and update their variant calls. Here, we describe STORMSeq (Scalable Tools for Open-Source Read Mapping), a graphical interface cloud computing solution that does not require a parallel computing environment or extensive technical experience. This customizable and modular system performs read mapping, read cleaning, and variant calling and annotation. At present, STORMSeq costs approximately $2 and 5–10 hours to process a full exome sequence and $30 and 3–8 days to process a whole genome sequence. We provide this open-access and open-source resource as a user-friendly interface in Amazon EC2.     

Gauging triple stores with actual biological data

Background

Identity by descent (IBD) has played a fundamental role in the discovery of genetic loci underlying human diseases. Both pedigree-based and population-based linkage analyses rely on estimating recent IBD, and evidence of ancient IBD can be used to detect population structure in genetic association studies. Various methods for detecting IBD, including those implemented in the soft- ware programs fastIBD and GERMLINE, have been developed in the past several years using population genotype data from microarray platforms. Now, next-generation DNA sequencing data is becoming increasingly available, enabling the comprehensive analysis of genomes, in- cluding identifying rare variants. These sequencing data may provide an opportunity to detect IBD with higher resolution than previously possible, potentially enabling the detection of disease causing loci that were previously undetectable with sparser genetic data.

Results

Here, we investigate how different levels of variant coverage in sequencing and microarray genotype data influences the resolution at which IBD can be detected. This includes microarray genotype data from the WTCCC study, denser genotype data from the HapMap Project, low coverage sequencing data from the 1000 Genomes Project, and deep coverage complete genome data from our own projects. With high power (78%), we can detect segments of length 0.4 cM or larger using fastIBD and GERMLINE in sequencing data. This compares to similar power to detect segments of length 1.0 cM or higher with microarray genotype data. We find that GERMLINE has slightly higher power than fastIBD for detecting IBD segments using sequencing data, but also has a much higher false positive rate.

Conclusion

We further quantify the effect of variant density, conditional on genetic map length, on the power to resolve IBD segments. These investigations into IBD resolution may help guide the design of future next generation sequencing studies that utilize IBD, including family-based association studies, association studies in admixed populations, and homozygosity mapping studies.     

The distribution and mutagenesis of short coding INDELs from 1,128 whole exomes

Background

Identifying insertion/deletion polymorphisms (INDELs) with high confidence has been intrinsically challenging in short-read sequencing data. Here we report our approach for improving INDEL calling accuracy by using a machine learning algorithm to combine call sets generated with three independent methods, and by leveraging the strengths of each individual pipeline. Utilizing this approach, we generated a consensus exome INDEL call set from a large dataset generated by the 1000 Genomes Project (1000G), maximizing both the sensitivity and the specificity of the calls.

Results

This consensus exome INDEL call set features 7,210 INDELs, from 1,128 individuals across 13 populations included in the 1000 Genomes Phase 1 dataset, with a false discovery rate (FDR) of about 7.0%.

Conclusions

In our study we further characterize the patterns and distributions of these exonic INDELs with respect to density, allele length, and site frequency spectrum, as well as the potential mutagenic mechanisms of coding INDELs in humans.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1333-7) contains supplementary material, which is available to authorized users.     

Improving mapping and SNP-calling performance in multiplexed targeted next-generation sequencing

ABSTRACT: BACKGROUND: Compared to classical genotyping, targeted next-generation sequencing (tNGS) can be custom-designed to interrogate entire genomic regions of interest, in order to detect novel as well as known variants. To bring down the per-sample cost, one approach is to pool barcoded NGS libraries before sample enrichment. Still, we lack a complete understanding of how this multiplexed tNGS approach and the varying performance of the ever-evolving analytical tools can affect the quality of variant discovery. Therefore, we evaluated the impact of different software tools and analytical approaches on the discovery of single nucleotide polymorphisms (SNPs) in multiplexed tNGS data. To generate our own test model, we combined a sequence capture method with NGS in three experimental stages of increasing complexity (E. coli genes, multiplexed E. coli, and multiplexed HapMap BRCA1/2 regions). RESULTS: We successfully enriched barcoded NGS libraries instead of genomic DNA, achieving reproducible coverage profiles (Pearson correlation coefficients of up to 0.99) across multiplexed samples, with <10% strand bias. However, the SNP calling quality was substantially affected by the choice of tools and mapping strategy. With the aim of reducing computational requirements, we compared conventional whole-genome mapping and SNP-calling with a new faster approach: target-region mapping with subsequent 'read-backmapping' to the whole genome to reduce the false detection rate. Consequently, we developed a combined mapping pipeline, which includes standard tools (BWA, SAMtools, etc.), and tested it on public HiSeq2000 exome data from the 1000 Genomes Project. Our pipeline saved 12 hours of run time per Hiseq2000 exome sample and detected ~5% more SNPs than the conventional whole genome approach. This suggests that more potential novel SNPs may be discovered using both approaches than with just the conventional approach. CONCLUSIONS: We recommend applying our general 'two-step' mapping approach for more efficient SNP discovery in tNGS. Our study has also shown the benefit of computing inter-sample SNP-concordances and inspecting read alignments in order to attain more confident results.     

The functional spectrum of low-frequency coding variation

Background

Rare coding variants constitute an important class of human genetic variation, but are underrepresented in current databases that are based on small population samples. Recent studies show that variants altering amino acid sequence and protein function are enriched at low variant allele frequency, 2 to 5%, but because of insufficient sample size it is not clear if the same trend holds for rare variants below 1% allele frequency.

Results

The 1000 Genomes Exon Pilot Project has collected deep-coverage exon-capture data in roughly 1,000 human genes, for nearly 700 samples. Although medical whole-exome projects are currently afoot, this is still the deepest reported sampling of a large number of human genes with next-generation technologies. According to the goals of the 1000 Genomes Project, we created effective informatics pipelines to process and analyze the data, and discovered 12,758 exonic SNPs, 70% of them novel, and 74% below 1% allele frequency in the seven population samples we examined. Our analysis confirms that coding variants below 1% allele frequency show increased population-specificity and are enriched for functional variants.

Conclusions

This study represents a large step toward detecting and interpreting low frequency coding variation, clearly lays out technical steps for effective analysis of DNA capture data, and articulates functional and population properties of this important class of genetic variation.     

Validation of Pooled Whole-Genome Re-Sequencing in Arabidopsis lyrata

Sequencing pooled DNA of multiple individuals from a population instead of sequencing individuals separately has become popular due to its cost-effectiveness and simple wet-lab protocol, although some criticism of this approach remains. Here we validated a protocol for pooled whole-genome re-sequencing (Pool-seq) of Arabidopsis lyrata libraries prepared with low amounts of DNA (1.6 ng per individual). The validation was based on comparing single nucleotide polymorphism (SNP) frequencies obtained by pooling with those obtained by individual-based Genotyping By Sequencing (GBS). Furthermore, we investigated the effect of sample number, sequencing depth per individual and variant caller on population SNP frequency estimates. For Pool-seq data, we compared frequency estimates from two SNP callers, VarScan and Snape; the former employs a frequentist SNP calling approach while the latter uses a Bayesian approach. Results revealed concordance correlation coefficients well above 0.8, confirming that Pool-seq is a valid method for acquiring population-level SNP frequency data. Higher accuracy was achieved by pooling more samples (25 compared to 14) and working with higher sequencing depth (4.1× per individual compared to 1.4× per individual), which increased the concordance correlation coefficient to 0.955. The Bayesian-based SNP caller produced somewhat higher concordance correlation coefficients, particularly at low sequencing depth. We recommend pooling at least 25 individuals combined with sequencing at a depth of 100× to produce satisfactory frequency estimates for common SNPs (minor allele frequency above 0.05).     

A comprehensive map of mobile element insertion polymorphisms in humans

As a consequence of the accumulation of insertion events over evolutionary time, mobile elements now comprise nearly half of the human genome. The Alu, L1, and SVA mobile element families are still duplicating, generating variation between individual genomes. Mobile element insertions (MEI) have been identified as causes for genetic diseases, including hemophilia, neurofibromatosis, and various cancers. Here we present a comprehensive map of 7,380 MEI polymorphisms from the 1000 Genomes Project whole-genome sequencing data of 185 samples in three major populations detected with two detection methods. This catalog enables us to systematically study mutation rates, population segregation, genomic distribution, and functional properties of MEI polymorphisms and to compare MEI to SNP variation from the same individuals. Population allele frequencies of MEI and SNPs are described, broadly, by the same neutral ancestral processes despite vastly different mutation mechanisms and rates, except in coding regions where MEI are virtually absent, presumably due to strong negative selection. A direct comparison of MEI and SNP diversity levels suggests a differential mobile element insertion rate among populations.     

Utilizing Genotype Imputation for the Augmentation of Sequence Data

Background

In recent years, capabilities for genotyping large sets of single nucleotide polymorphisms (SNPs) has increased considerably with the ability to genotype over 1 million SNP markers across the genome. This advancement in technology has led to an increase in the number of genome-wide association studies (GWAS) for various complex traits. These GWAS have resulted in the implication of over 1500 SNPs associated with disease traits. However, the SNPs identified from these GWAS are not necessarily the functional variants. Therefore, the next phase in GWAS will involve the refining of these putative loci.

Methodology

A next step for GWAS would be to catalog all variants, especially rarer variants, within the detected loci, followed by the association analysis of the detected variants with the disease trait. However, sequencing a locus in a large number of subjects is still relatively expensive. A more cost effective approach would be to sequence a portion of the individuals, followed by the application of genotype imputation methods for imputing markers in the remaining individuals. A potentially attractive alternative option would be to impute based on the 1000 Genomes Project; however, this has the drawbacks of using a reference population that does not necessarily match the disease status and LD pattern of the study population. We explored a variety of approaches for carrying out the imputation using a reference panel consisting of sequence data for a fraction of the study participants using data from both a candidate gene sequencing study and the 1000 Genomes Project.

Conclusions

Imputation of genetic variation based on a proportion of sequenced samples is feasible. Our results indicate the following sequencing study design guidelines which take advantage of the recent advances in genotype imputation methodology: Select the largest and most diverse reference panel for sequencing and genotype as many “anchor” markers as possible.