COCCOLITH-ASSOCIATED POLYSACCHARIDES FROM CELLS OF EMILIANIA HUXLEYI (HAPTOPHYCEAE)1

Coccoliths of Emiliania huxleyi (Lohmann) Hay and Mohler, a unicellular calcifying alga, consist of calcite closely associated with an acidic, Ca²⁺-binding polysaccharide. This polysaccharide is thought to play a regulatory role in coccolith synthesis by interfering with CaCO₃ crystallization. Here we show that the polysaccharides from three different strains, A 92, L and 92 D, all inhibit the precipitation of CaCO₃ in vitro to the same extent. The monosaccharide compositions of the A 92 and L polysaccharide are similar. The 92 D material, however, deviates from the other two: it contains significantly lower amounts of methylated sugars and ribose, and elevated levels of rhamnose and galactose. It also contains antigenic determinants not detected in the A 92 and L polysaccharides. In contrast to the latter two macromolecules the 92 D polysaccharide migrates as two bands upon polyacrylamide gel electrophoresis, possibly resulting from complexing with small amounts of protein. The coccolith polysaccharide from L cells, cultured at an elevated growth rate, also migrates as two bands. This phenomenon is due to an increase in molecular size distribution. The results suggest that certain properties of the molecule may be subject to variation without interfering with its function.     

Three Types of Acidic Polysaccharides Associated with Coccolith of Pleurochrysis haptonemofera: Comparison with Pleurochrysis carterae and Analysis Using Fluorescein-Isothiocyanate-Labeled Lectins

In the coccolithophorid microalgae acidic polysaccharides are considered to be involved in the formation of the calcified scale, coccolith. Characteristics of the acidic polysaccharides extracted from the cell surface of the coccolithophorid Pleurochrysis haptonemofera were analyzed. The acidic polysaccharides on the cell surface can be detected by measuring fluorescence of cells after fluorescein-isothiocyanate-labeled lectin staining by flow cytometry. Flow cytometric analyses revealed that the acidic polysaccharides remained on the cell surface even after CaCO₃ in the coccolith was dissolved by lowering pH, but they were extracted by subsequent EDTA or EGTA treatment, suggesting that they are bound not into the CaCO₃ crystals of the coccolith, but onto the surface via Ca²⁺. Analyses of the acidic polysaccharides by anion exchange chromatography, colloidal precipitation with divalent cations, and polyacrylamide gel electrophoresis (PAGE) revealed that P. haptonemofera has 3 types of acidic polysaccharides (Ph-PS-l, -2, and -3). The PAGE patterns suggested that Ph-PS-2 has a repeated structure with a broad range of molecular weight, as in Pleurochrysis carterae, while Ph-PS-1 and -3 contain several minor components in addition to a major component, respectively. The minor components in Ph-PS-1 and -3 that have not been found in P. carterae might be characteristic of P. haptonemofera. Analyses of both the cell surface treated by various concentrations of EDTA and EGTA and the extracts suggested that Ph-PS-2, which is distinguishable by a higher affinity to concanavalin A, is bound onto the coccolith surface more intensely than the other two types of acidic polysaccharides.     

Polyanion-mediated mineralization — assembly and reorganization of acidic polysaccharides in the Golgi system of a coccolithophorid alga during mineral deposition

Summary Immunolocalization of two highly acidic polysaccharides (PS-1 and PS-2) in a calcifying algaPleurochrysis carterae is described throughout the mineralization process, from before crystal nucleation through the cessation of crystal growth. This unicellular coccolithophorid alga is a useful model for mineralization because it produces calcified scales known as coccoliths in homogeneous cell culture. PS-1 and PS-2 were localized in the crystal coats of mature coccoliths and in electron dense Golgi particles. The polyanions are synthesized in medial Golgi cisternae and co-aggregate with calcium ions into discrete 25 nm particles. Particle-laden vesicles bud from cisternal margins and fuse with a coccolith-forming saccule containing an organic oval-shaped scale which forms the base of the future coccolith. The particles are localized on the base before the onset of mineral deposition and are present in the coccolith saccule throughout the period of crystal (CaCO₃) nucleation and growth. During the final phase of coccolith formation, the particles disappear, and the mature crystals acquire an amorphous coat containing PS-1 and PS-2 polysaccharides which remain with the mineral phase after the coccoliths are extruded from the cell. Postulated mechanisms of polyanion-mediated mineralization are reviewed and their relevance to the calcification of coccoliths is addressed.Abbreviations PS-1 polysaccharide one - PS-2 polysaccharide two - BSA bovine serum albumin - SDS sodium dodecyl sulfate - MES 2-(N-morpholino)-ethanesulfonic acid - EDTA ethylenediaminetetraacetic acid - DHA 3-deoxy-lyxo-2-heptulosaric acid - TCA trichloroacetic acid     

Effect of Coccolith Polysaccharides Isolated from the Coccolithophorid, <Emphasis Type="Italic">Emiliania huxleyi</Emphasis>, on Calcite Crystal Formation in In Vitro CaCO<Subscript>3</Subscript> Crystallization

Marine coccolithophorids (Haptophyceae) produce calcified scales “coccoliths” which are composed of CaCO₃ and coccolith polysaccharides (CP) in the coccolith vesicles. CP was previously reported to be composed of uronic acids and sulfated residues, etc. attached to the polymannose main chain. Although anionic polymers are generally known to play key roles in biomineralization process, there is no experimental data how CP contributes to calcite crystal formation in the coccolithophorids. CP used was isolated from the most abundant coccolithophorid, Emiliania huxleyi. CaCO₃ crystallization experiment was performed on agar template layered onto a plastic plate that was dipped in the CaCO₃ crystallization solution. The typical rhombohedral calcite crystals were formed in the absence of CP. CaCO₃ crystals formed on the naked plastic plate were obviously changed to stick-like shapes when CP was present in the solution. EBSD analysis proved that the crystal is calcite of which c-axis was elongated. CP in the solution stimulated the formation of tabular crystals with flat edge in the agarose gel. SEM and FIB-TEM observations showed that the calcite crystals were formed in the gel. The formation of crystals without flat edge was stimulated when CP was preliminarily added in the gel. These observations suggest that CP has two functions: namely, one is to elongate the calcite crystal along c-axis and another is to induce tabular calcite crystal formation in the agarose gel. Thus, CP may function for the formation of highly elaborate species-specific structures of coccoliths in coccolithophorids.     

CALCIFICATION BY COCCOLITHOPHORIDS: EFFECTS OF pH AND Sr1

Cells of Coccolithus huxleyi which fail to deposit CaCO₃ and form coccoliths often occur as unwanted components in cultures used for studies of calcification. Non-calcified cells generally cannot be made to recalcify, but they can be removed from cultures by treatment at elevated pH or by a method based on faster sinking of calcified cells. Lowering the concentrations of nitrate, phosphate, or trace metals in the medium did not restore calcifying ability of non-calcified cells. However, addition of strontium did promote recalcification of decalcified Cricosphaera carterae grown under calcium limitation. Strontium seemed to promote coccolith attachment to cells rather than to affect calcium uptake or coccolith formation itself.     

North Pacific Late Miocene correlations using microfossils,stable isotopes,percent CaCO3, and magnetostratigraphy

A multidisciplinary approach to stratigraphy based on magnetostratigraphy, stable isotopes, percent CaCO₃ and microfossils provides a framework for paleoclimatic and paleoceanographic reconstruction of the equatorial and North Pacific. A high-resolution biochronologic time scale has been achieved through integration of diatom, radiolaria, coccolith and planktic foraminifer datum levels with direct or indirect correlations to the paleomagnetic time scale. Over 70 datum levels have been identified between 12.5 and 5 Ma from low and middle latitudes resulting in an unprecedented time control. This high-resolution biostratigraphic control combined with stable-isotopic and percent CaCO₃ analyses permits identification of regional as well as global paleoceanographic events.     

Sequential Coccolith Morphogenesis in Hymenomonas carterae

SYNOPSIS. A careful re-examination with refined technics of the ultrastructure of the formation of calcified scales (coccoliths) in the marine unicellular alga Hymenomonas carterae has yielded new and more detailed information about the structure and morphogenesis of these unique and complex Golgi-elaborated organelles. The coccolith rim is formed from 2 distinct, alternating, anvil-shaped elements, 13–16 each, fitted together with a “right-handed” asymmetry. The coccolith is assembled in Golgi cisternae from 2 precursors, a single, scale-like base and multiple granular elements called coccolithosomes. The association of scales and coccolithosomes and subsequent development to the mature coccolith occur in a characteristic sequential fashion within what is one of the better examples of a polarized Golgi. Morphogenesis involves a special cisternal membrane association with the base of the coccolith, the contribution of granular material by coccolithosomes to form the outer rim matrix, and the subsequent filling of the area enclosed by the matrix with an electron-dense material, presumably CaCO₃. A “microenvironment” model system for species specific shape-determination of calcified elements is proposed.     

On the nature and causes of luminescent lines and bands in coral skeletons

Holes pushed into the surface of laboratory grade CaCO₃ powder reproduced visible and measurable luminescence similar to that seen and measured in coral skeletons. Heating such powder to 450 °C for 2 h did not destroy the luminescence although it did destroy luminescence in powdered coral skeleton. The effect in coral skeletal powder was probably due to carbonisation of contained organics because addition of small and increasing amounts of powdered charcoal to laboratory grade CaCO₃ increasingly attenuated luminescence. Luminescent lines and bands in coral skeletons have previously been ascribed to incorporation of humic substances. However, coating laboratory grade powder with humic acid attenuates rather than enhances luminescence. Ultra-violet lamps used to display coral luminescent lines and bands emit significant amounts of violet and blue visible light. Reflection of these visible wavelengths from the surface of laboratory grade CaCO₃ powder obscured luminescence of the powder. Multiple reflections within a hole in the powder resulted in absorption of the short wavelengths of visible light, including violet and blue light that would otherwise mask luminescence, and their re-emission at longer wavelengths. Luminescent bands in offshore corals were associated with the low-density regions of the annual density banding pattern. Luminescent lines in skeletons of inshore corals were in narrow regions of low-density skeleton, probably resulting from altered growth during periods of lowered salinity. Accepted: 20 April 2000     

Production of exopolysaccharide from ethanol inAgrobacterium radiobacter

Agrobacterium radiobacter produces an extracellular polysaccharide from various carbon sources. The exopolysaccharide is produced from ethanol also in a minimal medium containing nitrate as the sole nitrogen source. On cultivation in a medium without CaCO₃ only a minute amount of ethanol is converted to the exopolysaccharide. Both ethanol and nitrate in higher concentrations inhibit the growth rate. In a medium with CaCO₃ the proportion of ethanol converted to the polysaccharide is about ten-fold higher and the inhibitory effect of ethanol and nitrate on the growth rate is analogous to that found in the medium without CaCO₃-Comparison of results of mass and electron balance with a kinetic model shows that the parameters obtained in cultivations with CaCO₃ are less reliable. The balances point to the possibility of formation of other extracellular products.     

Production of lactic acid from paper sludge using acid-tolerant, thermophilic Bacillus coagulan strains

Production of lactic acid from paper sludge was studied using thermophilic Bacillus coagulan strains 36D1 and P4-102B. More than 80% of lactic acid yield and more than 87% of cellulose conversion were achieved using both strains without any pH control due to the buffering effect of CaCO₃ in paper sludge. The addition of CaCO₃ as the buffering reagent in rich medium increased lactic acid yield but had little effect on cellulose conversion; when lean medium was utilized, the addition of CaCO₃ had little effect on either cellulose conversion or lactic acid yield. Lowering the fermentation temperature lowered lactic acid yield but increased cellulose conversion. Semi-continuous simultaneous saccharification and co-fermentation (SSCF) using medium containing 100 g/L cellulose equivalent paper sludge without pH control was carried out in serum bottles for up to 1000 h. When rich medium was utilized, the average lactic acid concentrations in steady state for strains 36D1 and P4-102B were 92 g/L and 91.7 g/L, respectively, and lactic acid yields were 77% and 78%. The average lactic acid concentrations produced using semi-continuous SSCF with lean medium were 77.5 g/L and 77.0 g/L for strains 36D1 and P4-102B, respectively, and lactic acid yields were 72% and 75%. The productivities at steady state were 0.96 g/L/h and 0.82 g/L/h for both strains in rich medium and lean medium, respectively. Our data support that B. coagulan strains 36D1 and P4-102B are promising for converting paper sludge to lactic acid via SSCF.     

DISTRIBUTION OF TWO TYPES OF EMILIANIA HUXLEYI (PRYMNESIOPHYCEAE) IN THE NORTHEAST ATLANTIC REGION AS DETERMINED BY IMMUNOFLUORESCENCE AND COCCOLITH MORPHOLOGY1

Culture strains of Emiliania huxleyi (Lohmann 1902) Hay et al. 1967 were placed into two groups designated E. huxleyi type A and type B on the basis of coccolith morphology and immunological properties of the coccolith polysaccharide. We studied the distribution of these types in the North Atlantic region using an indirect immunofluorescence assay with antisera directed against the coccolith polysaccharide of E. huxleyi type A and type B and epifluorescence microscopy. In field samples taken in the Northeast Atlantic Ocean, E. huxleyi type A was found exclusively. In contrast, type B was dominant in the North Sea. Scanning electron microscopy of the samples revealed the same unequal distribution of the two types as found with the immunofluorescent-labelling assay.     

Studies on lectins. XXXVII. Isolation and characterization of the lectin from Jimson-weed seeds (Datura stramonium L.)

The lectin of Jimson-weed seeds (Datura stramonium L.) was isolated by affinity chromatography on a polysaccharide mixture from mycelium of Aspergillus niger. The lectin yields two bands on disc electrophoresis, it has sedimentation coefficient s20,w = 3.8 S and its apparent molecular weight estimated by thin layer gel chromatography is 120,000. The lectin reduced with mercaptoethanol yields on polyacrylamide gel electrophoresis in the presence of dodecyl sulfate three zones corresponding to subunits of molecular weight 72,000, 45,000 and 25,000. The lectin contains large amounts of cystine, glycine, 6.3% of hydroxyproline residues, 4.5% glucosamine and 28% of neutral sugar, predominantly arabinose. The lectin is nonspecific in human erythrocyte ABO system, it is not inhibited by simple sugars but is inhibited by a partial hydrolysate of chitin-containing mixture of polysaccharides from Aspergillus niger.     

Effects of base-soluble proteins and methanol-soluble polysaccharides from corn on mycelial growth of Aspergillus flavus

The antifungal activity of base-soluble proteins (BSP) and methanol-soluble polysaccharides (PS) from A. flavus resistant (Yellow Creole) and susceptible (Huffman) genotypes of corn were investigated by in vitro studies. Bioassays of fungal growth inhibition in agar media showed antifungal activity by proteins and polysaccharides only from the Huffman genotype. Microgramme quantities of protein and polysaccharides were required to retard fungal growth. The polysaccharides have molecular weights greater than 3.5 kilodaltons. Cathodic PAGE of native protein from the two genotypes showed six protein bands with differences in staining intensity of individual components. SDS-PAGE showed four distinct bands in Yellow Creole that were absent in Huffman. Both of the protein samples contained traces of carbohydrate. Analysis of hydrolyzed polysaccharide from the two genotypes showed different proportions of mannose and glucose.     

Optimization of renewal regime for improvement of polysaccharides production from Porphyridium cruentum by uniform design

To probe the effects of renewal regime on the production of polysaccharides, Porphyridium cruentum was cultured semi-continuously in flat plate photobioreactor. Uniform design was used to optimize renewal conditions. Quadratic mathematic models related to productivity, total recovery yield of biomass and polysaccharides were set up to clarify the influence of individual factors and their interactions. According to the mathematic models, the optimal semi-continuous condition for total yield of polysaccharide was NaNO₃ 3.5 g/L, renewal rate 27%, renewal period 2.91 days. The optimal condition for polysaccharide output rate was NaNO₃ 0.5 g/L, renewal rate 5%, renewal period 7 days. With the optimal renewal regime, the maximal total recovery yields of polysaccharide achieved at 29.4 g, which was 1.57 times higher than that of batch cultivation. The maximum output rate of polysaccharide was 68.64 mg/L per day, which was 2.02 times higher than previous reported data.     

Involvement of Acidic Polysaccharide Ph-PS-2 and Protein in Initiation of Coccolith Mineralization,as Demonstrated by In Vitro Calcification on the Base Plate

Coccolithophorids, unicellular marine microalgae, have calcified scales with elaborate structures, called coccoliths, on the cell surface. Coccoliths generally comprise a base plate, CaCO₃, and a crystal coat consisting of acidic polysaccharides. In this study, the in vitro calcification conditions on the base plate of Pleurochrysis haptonemofera were examined to determine the functions of the base plate and acidic polysaccharides (Ph-PS-1, -2, and -3). When EDTA-treated coccoliths (acidic polysaccharide-free base plates) or low pH-treated coccoliths (whole acidic polysaccharide-containing base plates) were used, mineralization was not detected on the base plate. In contrast, in the case of coccoliths which were decalcified by lowering of the pH and then treated with urea (Ph-PS-2-containing base plates), distinct aggregates, probably containing CaCO₃, were observed only on the rim of the base plates. Energy dispersive X-ray spectroscopy (EDS) confirmed that the aggregates contained Ca and O, although X-ray diffraction analysis did not reveal any evidence of crystalline materials. Also, in vitro mineralization experiments performed on EDTA-treated coccoliths using isolated acidic polysaccharides demonstrated that the Ca-containing aggregates were markedly formed only in the presence of Ph-PS-2. Furthermore, in vitro mineralization experiments conducted on protein-extracted base plates suggested that the coccolith-associated protein(s) are involved in the Ca deposition. These findings suggest that Ph-PS-2 associated with the protein(s) on the base plate rim initiates Ca²⁺ binding at the beginning of coccolith formation, and some other factors are required for subsequent calcite formation.     

POLYSACCHARIDES FROM THE ENVELOPES OF HETEROCYSTS AND SPORES OF THE BLUE-GREEN ALGAE ANABAENA VARIABILIS AND CYLINDROSPERMUM LICHENIFORME1

The polysaccharides from the envelopes of heterocysts of Cylindrospermum licheniforme Kütz., and of heterocysts and spores of Anabaena variabilis Kütz., like those from the differentiated cells of Anabaena cylindrica Lemm., have a 1,3-linked backbone consisting of glucosyl and mannosyl residues in a molar ratio of approximately 3:1. As is the case with A. cylindrica the polysaccharides from A. variabilis and from the heterocysts of C. licheniforme have terminal xylosyl and galactosyl residues as side branches. In addition, the polysaccharide from C. licheniforme resembles that from A. cylindrica in having terminal mannosyl residues as side branches (absent from A. variabilis). The polysaccharides from A. variabilis resemble that from A. cylindrica in having glucose-containing side branches (absent from the heterocyst polysaccharide from C. licheniforme), but in contrast to the polysaccharides from the other two species they also have terminal arabinosyl residues as side branches. All of the polysaccharides mentioned appear to be structurally related; we present tentative structures for those not previously investigated. In contrast, the envelope of spores of C. licheniforme contains only a largely 4-linked galactan. The bulk of this envelope is not polysaccharide in nature, and contains aromatic groups.     

Effect of extraction temperature on the diffusion coefficient of polysaccharides from Spirulina and the optimal separation method

The extraction temperature had a significant impact on the concentration of polysaccharides derived from solid-liquid extraction of Spirulina. The polysaccharide concentration was significantly higher when the extraction was performed at 90°C than when it was performed at 80, 70, and 50°C. This result is related to the diffusion coefficients of the polysaccharides, which increased from 1.07 × 10^?12 at 50°C to 3.02 × 10^?12 m²/sec at 90°C. Using the Arrhenius equation, the pre-exponential factor (D ₀ ) and the activation energy (E _a ) for Spirulina polysaccharide extraction were calculated as 7.958 × 10^?9 m²/sec and 24.0 kJ/mol, respectively. Among the methods used for the separation of Spirulina polysaccharides, cetyltrimethylammonium bromide (CTAB, method I) and organic solvent (ethanol, in methods II and III) provided similar yields of polysaccharides. However, the separation of polysaccharides using an ultrafiltration (UF) process (method III) and ethanol precipitation was superior to separation via CTAB or vacuum rotary evaporation (method II). The use of a membrane with a molecular weight cut-off (MWCO) of 30 kDa and an area of 0.01 m² at a feed pressure of 103 kPa with a mean permeate flux of 39.3 L/m²/h and a retention rate of 95% was optimal for the UF process. The addition of two volumes (v/v) of ethanol, which gave a total polysaccharide content of approximately 4% dry weight, was found to be most suitable for polysaccharide precipitation. The results of a Sepharose 6B column separation showed that the molecular weights of the polysaccharides in fractions I and II were 212 and 12.6 kDa, respectively.     

Polysaccharide structure of tetrasporic red seaweed Tichocarpus crinitus

Sulfated polysaccharide isolated from tetrasporic plants of Tichocarpus crinitus was investigated. The polysaccharide was isolated by two methods: with water extraction at 80 °C (HT) and with a mild alkaline extraction (AE). The extracted polysaccharides were presented by non-gelling ones only, while galactose and 3,6-AG were the main monosaccharides, at the same time amount of 3,6-AG in AE polysaccharides was the similar to that of HT. According to methods of spectroscopy and mass spectrometry, the polysaccharide from tetrasporic T. crinitus contains main blocks of 1,3-linked β-d-galactopyranosyl-2,4-disulfates and 1,4-linked 3,6-anhydro-α-d-galactopyranosyl while 6-sulfated 4-linked galactopyranosyl resudies are randomly distributed along the polysaccharide chain. The alkaline treatment of HT polysaccharide results in obtaining polysaccharide with regular structure that composed of alternating 1,3-linked β-d-galactopyranosyl-2,4-disulfates and 1,4-linked 3,6-anhydro-α-d-galactopyranosyl residues. Native polysaccharide (HT) possessed both high anticoagulant and antiplatelet activity measured by fibrin clotting and platelet aggregation induced by collagen. This activity could be connected with peculiar chemical structure of HT polysaccharide which has high sulfation degree and contains also 3,6-anhydrogalactose in the polymer chain.     

辣椒叶多糖抗氧化作用研究

目的:从辣椒叶中分离纯化活性多糖并考察其抗氧化活性。方法:采用水提醇沉法提取多糖,Sevag法脱蛋白,得辣椒叶粗多糖;分别使用超纯水、0.06 mol/L NaCl溶液、0.18 mol/L NaCl溶液作为洗脱液,通过DEAE-52离子交换柱色谱纯化得到三种辣椒叶多糖LD-0、LD-0.06、LD-0.18,测定多糖含量。DPPH、ABTS法检测多糖体外抗氧化作用。以小鼠血清、肝组织中总超氧化物歧化酶活性、过氧化氢酶活性及丙二醛含量为指标,考察小鼠灌胃LD-0.06多糖对脂质过氧化模型的影响。结果:辣椒叶粗多糖、LD-0、LD-0.06、LD-0.18多糖含量分别为9.92%、43.14%、82.97%、37.63%,其中LD-0.06多糖含量最高。体外抗氧化实验结果显示,三种结果均具备较好的清除能力,其中LD-0.06对ABTS+、DPPH·的清除效果最好,IC50值分别为0.58 mg/m L和0.60 mg/m L,结果与对照组在0.05水平具有显著性差异,说明辣椒叶多糖提取物是一种有效的天然抗氧化剂。在脂质过氧化模型小鼠体内,与模型组比较,LD-0.06多糖能显著增强小鼠血清和肝组织中的T-SOD与CAT活性,降低MDA的含量,且剂量越高,体内抗氧化能力越强。结论:辣椒叶多糖提取物具有一定的抗氧化作用,为进一步开发利用辣椒资源提供了理论依据。     

Optimization of aqueous-assisted extraction of polysaccharides from pumpkin (Cucurbita moschata Duch) and their biological activities

The pumpkin pulp contains a greater composition of edible polysaccharides and has reported with excellent biological applications. This research pertains to optimize the extraction of polysaccharides from the fleshy portion of the pumpkin using aqueous assisted extraction (AAE). The result showed that the optimal extraction condition of pumpkin polysaccharide was as follows: extraction temperature at 55 °C, pH 4.5, and enzyme concentration of 4000 µ/g for 80 min. Under the optimal extraction condition, the yield of pumpkin polysaccharide via AAE (15.4) was significantly higher. The biological activities of extracted polysaccharide including α-amylase inhibition (57.41% at 1000 µg/mL) and anti-inflammatory (50.41% at 25 µg/mL) activity increased significantly. Additionally, the antioxidant activities of extracted pumpkin polysaccharides including IC₅₀ values of DPPH and ABTS were 59.87% and 58.74%, respectively. The pumpkin polysaccharide has maximum inhibitory effects against bacterial strains especially for Escherichia coli than that of fungal strains. It is suggested that the aqueous assisted extraction of is a cost-effective promising method to decrease the processing time as well as enhancing extracted polysaccharide yield – times.