Synthesis of a Low-Molecular-Weight Form of Exopolysaccharide by Bradyrhizobium japonicum USDA 110

A novel extracellular low-molecular-weight polysaccharide was detected as a contaminant within extracellular cyclic β-1,6-β-1,3-glucan preparations from Bradyrhizobium japonicum USDA 110 cultures. Compositional analysis, methylation analysis, and nuclear magnetic resonance analysis revealed that this low-molecular-weight polysaccharide was composed of the same pentasaccharide repeating unit previously described for the high-molecular-weight form of the exopolysaccharide (EPS) synthesized by B. japonicum strains. Mass spectrometry analysis indicated that the size of this low-molecular-weight form of EPS was consistent with a dimeric form of the pentasaccharide repeating unit.     

Structural studies of an exopolysaccharide produced by Streptococcus thermophilus THS

The structure of an extracellular polysaccharide (EPS) from Streptococcus thermophilus THS has been determined. A combination of component analysis, methylation analysis and NMR spectroscopy shows that the polysaccharide is composed of pentasaccharide repeating units. Sequential information was obtained by two-dimensional (1)H,(1)H-NOESY and (1)H,(13)C-HMBC NMR experiments. NMR data indicate different mobility within the EPS with a stiffer backbone and a more flexible side-chain.     

Identification, isolation, and structural studies of extracellular polysaccharides produced by Caulobacter crescentus.

Caulobacters are adherent prosthecate bacteria that are members of bacterial biofouling communities in many environments. Investigation of the cell surface carbohydrates produced by two strains of the freshwater Caulobacter crescentus, CB2A and CB15A, revealed a hitherto undetected extracellular polysaccharide (EPS) or capsule. Isolation and characterization of the EPS fractions showed that each strain produced a unique neutral EPS which could not be readily removed from the cell surface by washing. Monosaccharide analysis showed that the main CB2A EPS contained D-glucose, D-gulose, and D-fucose in a ratio of 3:1:1, whereas the CB15A EPS fraction contained D-galactose, D-glucose, D-mannose, and D-fucose in approximately equal amounts. Methylation analysis of the main CB2A EPS showed the presence of terminal glucose and gulose groups, 3-linked fucosyl, and two 3,4-linked glucosyl units, thus confirming the pentasaccharide repeating unit indicated by 1H nuclear magnetic resonance analysis. Similar studies of the CB15A EPS revealed a tetrasaccharide repeating unit consisting of terminal galactose, 4-linked fucosyl, 3-linked glucosyl, and 3,4-linked mannosyl residues. EPS was not detectable by thin-section electron microscopy techniques, including some methods designed to preserve or enhance capsules, nor was the EPS readily detected on the cell surface by scanning electron microscopy when conventional fixation techniques were used; however, a structure consistent with EPS was revealed when samples were prepared by cryofixation and freeze-substitution methods.     

Structural studies of the exopolysaccharide produced by Lactobacillus rhamnosus strain GG (ATCC 53103)

The structure of the extracellular polysaccharide (EPS) from Lactobacillus rhamnosus strain GG has been investigated. In combination with component analysis, NMR spectroscopy shows that the polysaccharide is composed of hexasaccharide repeating units. Sequential information was obtained by two-dimensional (1)H,(1)H-NOESY, and (1)H,(13)C-HMBC NMR techniques. The structure of the repeating unit of the EPS from Lactobacillus rhamnosus strain GG was determined as: [carbohydrate structure: see text]     

Structure of an extracellular polysaccharide produced by Lactobacillus rhamnosus strain C83.

The extracellular polysaccharide produced by Lactobacillus rhamnosus strain C83 was found to be composed of D-glucose and D-galactose in a molar ratio of 2:3. The primary structure of the polysaccharide was shown by sugar analysis, methylation analysis, FABMS, partial acid hydrolysis and nuclear magnetic resonance (NMR) spectroscopy to consist of a pentasaccharide repeating unit having the following structure: -->3)-alpha-D-Glcp-(1-->2)-beta-D-Galf-(1-->6)-alpha-D-Galp-(1-->6 )-alpha-D -Glcp-(1-->3)-beta-D-Galf-(1-->     

Structural analysis of the O-antigen polysaccharide from the Shiga toxin-producing Escherichia coli O172.

The structure of the O-antigen polysaccharide from Escherichia coli O172 has been determined. In combination with sugar analysis, NMR spectroscopy shows that the polysaccharide is composed of pentasaccharide repeating units. Sequential information was obtained by mass spectrometry and two-dimensional NMR techniques. An O-acetyl group was present as 0.7 equivalent per repeating unit. Treatment of the O-deacetylated polysaccharide with aqueous 48% hydrofluoric acid rendered cleavage of the phosphodiester in the backbone of the polymer and the pentasaccharide isolated after gel permeation chromatography was structurally characterized. Subsequent NMR experiments on polymeric materials revealed the structure of the repeating unit of the O-polysaccharide from E. coli O172 as:-->P-4)-alpha-D-Glcp-(1-->3)-alpha-L-FucpNAc-(1-->3)-alpha-D- GlcpNAc-(1-->3)-alpha-L-FucpNAc-(1-->4)-alpha-D-Glcp6Ac-(1-->     

Structure and immunochemistry of an oligosaccharide repeating unit of the capsular polysaccharide of type III group B Streptococcus. A revised structure for the type III group B streptococcal polysaccharide antigen

We have derived oligosaccharides from the capsular polysaccharide of type III group B Streptococcus by enzymatic hydrolysis of a specific backbone glycosidic bond utilizing an endo-beta-galactosidase from Flavobacterium keratolyticus. Enzymatic digestion of the polysaccharide produced oligosaccharide fragments of one or more pentasaccharide repeating units. On the basis of 13C NMR, 1H NMR, and methylation analyses, it was established that the smallest digestion fragment was alpha-D-NeupNAc-(2----3)-beta-D-Galp-(1----4)-[beta-D-Glcp-(1----6 )]- beta-D-GlcpNAc-(1----3)-beta-D-Gal. The isolation of this oligosaccharide is consistent with the susceptibility of the beta-D-Galp-(1----4)-beta-D-Glcp linkage in the backbone of the type III group B streptococcal polysaccharide and confirms that the polysaccharide is composed of a pentasaccharide repeating unit. High resolution 13C NMR spectroscopic studies indicated that, as in the case of the pentasaccharide, the terminal sialic acid residues of the type III group B streptococcal polysaccharide were linked to O-3 and not to O-6 of its branch beta-D-galactopyranosyl residues as had been previously reported (Jennings, H. J., Rosell, K.-G., and Kasper, D. L. (1980) Can. J. Chem. 58, 112-120). This linkage was confirmed in an independent methylation analysis of the type III group B streptococcal polysaccharide. Thin layer chromatogram binding assay and radioactive antigen binding assays with radiolabeled oligosaccharides demonstrated the single repeating unit pentasaccharide oligosaccharide to be poorly antigenic. Increasing oligosaccharide size to a decasaccharide consisting of two repeating units resulted in an 8-fold increase in antigen binding in the direct radioactive antigen binding assay. The results suggest that a region of the immunodeterminant site critical for antibody binding is located in the backbone of the polysaccharide and involves the beta-D-galactopyranose-(1----4) beta-D-glucopyranose bond.     

The use of bacteriophage depolymerization in the structural investigation of the capsular polysaccharide from Klebsiella serotype K3

The structure of the repeating unit of the capsular polysaccharide from Klebsiella serotype K3 has been established from the results of n.m.r. (1H and 13C) spectroscopy and methylation analysis of P1, the pyruvic acetal-bearing pentasaccharide obtained on depolymerization of the polysaccharide with a bacteriophage-borne endogalactosidase, reduced deacetalated P1, and the native polysaccharide. The data permit the assignment of the following structure to the repeating unit: (formula see text)     

Structural analysis of mucoidan, an acidic extracellular polysaccharide produced by a pristane-assimilating marine bacterium, Rhodococcus erythropolis PR4

Rhodococcus erythropolis PR4 is a marine bacterium that can degrade various alkanes including pristane, a C(19) branched alkane. This strain produces a large quantity of extracellular polysaccharides (EPS), which are assumed to play an important role in the hydrocarbon tolerance of R. erythropolis PR4. The strain produced an acidic EPS, mucoidan, together with a fatty acid-containing EPS, PR4 FACEPS. The chemical structure of the mucoidan was determined using (1)H and (13)C NMR spectroscopy and by conducting 2D DQF-COSY, TOCSY, HMQC, HMBC, and NOESY experiments. The mucoidan was shown to consist of a pentasaccharide repeating unit with the following structure: [structure: see text].     

Structure of the repeating chain of the O-specific polysaccharide of Vibrio fluvialis

O-Specific polysaccharide chain of the Vibrio fluvialis lipopolysaccharide is built up of pentasaccharide repeating units, containing one N-acetyl-D-glucosamine and four L-rhamnose residues. The structure of the polysaccharide was elucidated using two-dimensional correlation 1H-NMR-spectroscopy, 13C-NMR-spectroscopy and nuclear Overhauser effect and confirmed by methylation analysis and selective cleavage of N-acetylglucosamine residues by the N-deacetylation-deamination method which yielded linear L-rhamnan representing the backbone of the polysaccharide. Thus, the repeating unit of the O-specific polysaccharide has the following structure: (formula; see text)     

Structural analysis of the extracellular polysaccharide produced by Sphaerotilus natans

An extracellular polysaccharide (EPS) was recovered and purified from the culture fluid of a sheathed bacterium, Sphaerotilus natans. Glucose, rhamnose, and aldobiouronic acid were detected in the acid hydrolysate of EPS by thin-layer chromatography (TLC). The aldobiouronic acid was found to be composed of glucuronic acid and rhamnose by TLC and gas-liquid chromatography analyses of the corresponding neutral disaccharide. The structure of EPS was identified by methylation linkage analysis and nuclear magnetic resonance. Additionally, partial acid hydrolysates of EPS were prepared and put through fast atom bombardment-mass spectrometry to determine the sugar sequence of EPS. The resulting data showed that EPS produced by S. natans is a new gellan-like polysaccharide constructed from a tetrasaccharide repeating unit, as shown below. -->4)-alpha-D-Glcp-(1-->2)-beta-D-GlcA p-(1-->2)-alpha-L-Rha p-(1-->3)-beta-L-Rha p-(1-->.     

Structural studies of the O-antigenic polysaccharides from the enteroaggregative Escherichia coli strain 522/C1 and the international type strain from Escherichia coli O 178

The structure of the O-antigenic polysaccharide (PS) from the enteroaggregative Escherichia coli strain 522/C1 has been determined. Component analysis and (1)H and (13)C NMR spectroscopy techniques were used to elucidate the structure. Inter-residue correlations were determined by (1)H,(1)H-NOESY and (1)H,(13)C-heteronuclear multiple-bond correlation experiments. The PS is composed of pentasaccharide repeating units with the following structure: [ structure: see text]. Analysis of NMR data reveals that on average the PS consists of four repeating units and indicates that the biological repeating unit contains an N-acetylgalactosamine residue at its reducing end. Serotyping of the E. coli strain 522/C1 showed it to be E. coli O 178:H7. Determination of the structure of the O-antigen PS of the international type strain from E. coli O 178:H7 showed that the two polysaccharides have identical repeating units. In addition, this pentasaccharide repeating unit is identical to that of the capsular polysaccharide from E. coli O9:K 38, which also contains O-acetyl groups.     

Coprecipitation of Th<Superscript>4+</Superscript> and the purified extracellular polysaccharide produced by bacterium <Emphasis Type="Italic">Bradyrhizobium</Emphasis> (<Emphasis Type="Italic">Chamaecytisus</Emphasis>) BGA-1

The soil bacterium Bradyrhizobium (Chamaecytisus) strain BGA-1 produces an extracellular polymeric substance (EPS) that, in the presence of Fe³⁺, Al³⁺ or Th⁴⁺ solutions, forms a gel-like precipitate composed of polysaccharide, protein, lipopolysaccharide and the metal. Precipitation of the main component of the EPS, the extracellular polysaccharide, and thorium was studied. The precipitate was stable, but redissolved at pH values below 3.0 or in the presence of 10 mM EDTA. In the precipitate, the ratio thorium/basic repeating unit of the polysaccharide ranged from 0.4 to 0.8 mol/mol. Soluble polysaccharide–thorium complexes were not found, and larger polysaccharide molecules were precipitated in preference to smaller ones. Kinetic studies showed a non-linear dependence of the precipitate on the concentrations of both thorium and polysaccharide. The behaviors of the purified polysaccharide and of whole EPS with the thorium-containing precipitate were compared. The results suggested that EPS components other than polysaccharide are able to modify the precipitating ability of the polysaccharide. Thus, whole EPS is a better substrate than the purified polysaccharide for the removal of thorium from its solutions.     

Production of exopolysaccharides from a thermophilic microorganism isolated from a marine hot spring in flegrean areas

A thermophilic strain isolated from sea sand at Maronti, near Sant' Angelo (Ischia), is described. The organism grows well at an optimal temperature of 60 °C at pH 7.0. The thermophilic bacterium, named strain 4004, produces an exocellular polysaccharide (EPS) in yields of 90 mg/l. The EPS fraction was produced with all substrates tested, although a higher yield was obtained with sucrose or trehalose as sole carbon source. During growth, the EPS content was proportional to the biomass. Three fractions (EPS1, EPS2, EPS3) were obtained after purification. Quantitative monosaccharide analysis of the EPSs revealed the presence of mannose:glucose:galactose in a relative ratio of 0.5:1.0:0.3 in EPS1, mannose:glucose:galactose in a relative ratio of 1.0:0.3:trace in EPS2, and galactose:mannose:glucosamine:arabinose in a relative ratio of 1.0:0.8:0.4:0.2 in EPS3. The average molecular mass of EPS3 was determined to be 1×10⁶ Da. From comparison of the chemical shift values in ¹H and ¹³C spectra, we conclude that EPS3 presents a pentasaccharide repeating unit. Electronic Publication     

Structural studies on Klebsiella type 61 capsular polysaccharide

The capsular polysaccharide from klebsiella type 61 was found to contain d-galactose, d-glucose, d-mannose, and d-glucuronic acid in the ratios 1:2:1:1. Acid hydrolysis of the polysaccharide gave one aldobiouronic acid, whose structure was established. Methylation analysis of the polysaccharide provided information about the linkages in the polysaccharide. The polysaccharide is composed of a pentasaccharide repeating unit for which structures are proposed.     

Antigenic bacterial polysaccharides. 28. The structure of the O-specific lipopolysaccharide chain of Pseudomonas syringae pv. atrofaciens K-1025 and Pseudomonas holci 90a (serogroup II)

Lipopolysaccharides of serologically related strains of Pseudomonas syringae pv. atrofaciens K-1025 and Pseudomonas holci 90a possess the identical O-specific polysaccharide chains, representing a homopolymer of D-rhamnose. On the basis of methylation, partial and complete Smith degradation, and analysis by 1H- and 13C-NMR-spectroscopy, it was concluded that the repeating unit of the polysaccharide is a branched pentasaccharide of the following structure: (formula; see text)     

The structure of a polysaccharide from infectious strains of Burkholderia cepacia.

The structure of an acidic exopolysaccharide (EPS) from eight strains of Burkholderia cepacia has been investigated by methylation and sugar analysis, periodate oxidation-Smith degradation, and partial acid-hydrolysis. An enzyme preparation obtained from the same organisms producing the EPS was also used to depolymerize the polysaccharide. Detailed NMR studies of the chemical and enzymatic degradation products showed that this EPS consists of a highly branched heptasaccharide-repeating unit with the following structure: [abstract: see text]. About three O-acetyl groups per repeating unit are present at undetermined positions.     

Structural studies utilizing 13C-enrichment of the O-antigen polysaccharide from the enterotoxigenic Escherichia coli O159 cross-reacting with Shigella dysenteriae type 4.

The structure of the O-antigen polysaccharide from Escherichia coli O159 has been determined using primarily NMR spectroscopy of the 13C-enriched polysaccharide. The sequence of the sugar residues could be determined by heteronuclear multiple bond connectivity NMR experiments. The polysaccharide is composed of a pentasaccharide repeating unit with the following structure: [sequence: see text] Matrix assisted laser desorption ionization mass spectrometry was performed on intact lipopolysaccharide and from the resulting molecular mass the O-antigen part was estimated to contain approximately 23 repeating units. Cross-reactivity of this O-antigen to that of Shigella dysenteriae type 4 was confirmed using enzyme-linked immunoabsorbant assay.     

Structure of a polysaccharide from a Rhizobium species containing 2-deoxy-beta-D-arabino-hexuronic acid.

The structure of the extracellular polysaccharide (EPS) produced by the Rhizobium sp. B strain isolated from atypical nodules on alfalfa has been determined using a combination of chemical and physical techniques (methylation analysis, high pH-anion exchange chromatography (HPAEC), mass spectrometry and 1-D and 2-D NMR spectroscopy). As opposed to the EPS from other strains of Rhizobium, the EPS from the sp. B strain contains D-Glc together with L-Rha and 2-deoxy-D-arabino-hexuronic acid. It is a polymer of a repeating unit having the following structure: --> 4)-beta-D-Glcp-(1 --> 4)-alpha-L-Rhap -(1 --> 3)-beta-D-Glcp-(1 --> 4)-2-deoxy-beta-D-GlcpA-(1 -->. The polysaccharide also contains 0.6 O-acetyl groups per sugar which have not been located.     

Structure of an extracellular cross-reactive polysaccharide from Pseudomonas aeruginosa immunotype 4

A neutral small molecular mass (approximately 6.5 kDa) polysaccharide comprising a pentasaccharide repeat unit was isolated from culture supernatants of Pseudomonas aeruginosa immunotype 4. The polysaccharide had a pentasaccharide repeating unit as follows (formula; see text) where Rha is rhamnose. The structure was determined using acid hydrolysis, solvolysis with anhydrous hydrogen fluoride, methylation analysis, and 1H and 13C nuclear magnetic resonance spectroscopy including nuclear Overhauser enhancement experiments. The polysaccharide bound antibody raised to the lipopolysaccharide of the seven P. aeruginosa Fisher-Devlin immunotype strains. Inhibition assays demonstrated the presence of a serologically similar polysaccharide in supernatants of these strains. Affinity-purified antibody to the polysaccharide bound to lipopolysaccharide and whole cells of the immunotype strains of P. aeruginosa in a Western immunoblot and colony blot assay, respectively. This polysaccharide seems to contain an antigenic determinant present in the core of the P. aeruginosa lipopolysaccharide or may represent another minor polysaccharide substituent on the lipopolysaccharide in addition to the O side chain.