Rapid Schedules for Koh Clearing and Alizarin Red S Staining of Fetal Rat Bone

Various schedules for staining fetal rat skeleton with alizarin red S were tested to determine a procedure that would produce a completely cleared and well-stained specimen in a short period of time. A 2 day procedure is presented which can produce specimens that are satisfactory but not completely transparent. A 7 day procedure produces cleared and stained specimens which can be well visualized with a dissecting microscope (30×). Fetal rats of 21 days gestation were fixed in 10% formalin for at least 1 wk. The specimens were skinned and eviscerated and then dehydrated in 2 changes of acetone for 12 hr (8 ml per gram body weight). The specimens were then placed in 1% KOM-alizarin red S (6 mg/liter) or 3 days, followed by 10% KOH-alizarin red S for 3 days. Finally, the specimens were placed in a mixture of benzyl alcohol, ethanol, and glycerol (1:2:2) (4 ml per gram body weight) for 12 hr, and then transferred to pure glycerol for storage.     

A Method for Staining Pollen Tubes in Pistil

A quadruple staining procedure has been developed for staining pollen tubes in pistil. The staining mixture is made by adding the following in the order given: lactic acid, 80 ml; 1% aqueous malachite green, 4 ml; 1% aqueous acid fuchsia, 6 ml; 1% aqueous aniline blue, 4 ml; 1 % orange G in 50% alcohol, 2 ml; and chloral hydrate, 5 g. Pistils are fixed for 6 hr in modified Carnoy's fluid (absolute alcohol:chloroform:glacial acetic acid 6:4:1), hydrated in descending alcohols, transferred to stain and held there for 24 hr at 45±2 C They were then transferred to a clearing and softening fluid containing 78 ml lactic acid, 10 g phenol, 10 g chloral hydrate and 2 ml 1% orange G. The pistils were held there for 24 hr at 45±2 C, hydrolyzed in the clearing and softening fluid at 58±1 C for SO min, then stored in lactic acid for later use or immediately mounted in a drop of medium containing equal parts of lactic acid and glycerol for examination. Pollen tubes are stained dark blue to bluish red and stylar tissue light green to light greenish blue. This stain permits pollen tubes to be traced even up to their entry into the micropyle.     

A method for staining pollen tubes in pistil

A quadruple staining procedure has been developed for staining pollen tubes in pistil. The staining mixture is made by adding the following in the order given: lactic acid, 80 ml; 1% aqueous malachite green, 4 ml; 1% aqueous acid fuchsin, 6 ml; 1% aqueous aniline blue, 4 ml; 1% orange G in 50% alcohol, 2 ml; and chloral hydrate, 5 g. Pistils are fixed for 6 hr in modified Carnoy's fluid (absolute alcohol:chloroform:glacial acetic acid 6:4:1), hydrated in descending alcohols, transferred to stain and held there for 24 hr at 45 +/- 2 C. They were then transferred to a clearing and softening fluid containing 78 ml lactic acid, 10 g phenol, 10 g chloral hydrate and 2 ml 1% orange G. The pistils were held there for 24 hr at 45 +/- 2 C, hydrolyzed in the clearing and softening fluid at 58 +/- 1 C for 30 min, then stored in lactic acid for later use or immediately mounted in a drop of medium containing equal parts of lactic acid and glycerol for examination. Pollen tubes are stained dark blue to bluish red and stylar tissue light green to light greenish blue. This stain permits pollen tubes to be traced even up to their entry into the micropyle.     

Automated differential staining for cartilage and bone in whole mount preparations of vertebrates

An automated, rapid procedure for differential staining of cartilage and bone of vertebrates is described. The process involves rapid, complete staining of freshly skinned, eviscerated specimens after 30 sec immersion in a 70 C water bath, fixation in formol acetic alcohol and a rinse in 70% alcohol. Using an automatic tissue processor, the specimen is stained in alcian blue for 24 hr and macerated in 3% potassium hydroxide for 8 hr. Staining in alizarin red with maceration in 3% potassium hydroxide is completed manually. The specimens are cleared and preserved in glycerol. Good quality evenly stained specimens can be examined in less than three days and up to 600 fetuses can be processed in less than five days.     

Automated Differential Staining for Cartilage and Bone in Whole Mount Preparations of Vertebrates

An automated, rapid procedure for differential staining of cartilage and bone of vertebrates is described. The process involves rapid, complete staining of freshly skinned, eviscerated specimens after 30 sec immersion in a 70 C water bath, fixation in formol acetic alcohol and a rinse in 70% alcohol. Using an automatic tissue processor, the specimen is stained in alcian blue for 24 hr and macerated in 3% potassium hydroxide for 8 hr. Staining in alizarin red with maceration in 3% potassium hydroxide is completed manually. The specimens are cleared and preserved in glycerol. Good quality evenly stained specimens can be examined in less than three days and up to 600 fetuses can be processed in less than five days.     

Histological Localization of Microelectrode Placement in Brain by Ferrocyanide and Silver Staining

After recordings had been taken from a microelectrode used for mapping nerve impulses, a current of 100 μa from the positive pole of a direct current generator was run through the electrode for 5 sec while it was still in place. On terminating the experiment, in which the use of several electrodes was possible, 50-75 ml of a 1:1 mixture of 4% potassium ferrocyanide and 4% acetic acid was injected into each common carotid artery, and the brain left in situ for 0.5 hr. It was then removed and the electrode-bearing part fixed 5-6 hr in a 1:1 mixture of 40% formalin and 95% ethyl alcohol at 55 °C. This specimen was washed in running water 5-10 min, the electrodes removed and frozen sections of 40-80 μ cut and placed in 95% alcohol. Sections were stained 5-10 min at 25-30°C in 10% silver nitrate solution in 75-80% alcohol acidified by 3-4 drops of glacial acetic acid per 50 ml, washed 4-5 sec in each of 2 baths of 95% alcohol, and reduced while being agitated constantly in a 2% solution of pyrogallol and 6-7% formalin in 75-80% alcohol. Washing in 95% alcohol, clearing in clove oil or methyl salicylate followed by xylene and mounting in synthetic resin or balsam completed the process. Sites of electrolysis at the tips of electrodes (under magnification) were blue before silver staining and black after staining. Axons stained brown to black on a yellow background.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5–2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3–5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5–30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12–16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1–2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

A Modified Pyridine-Silver Stain for Teased Preparations of Motor and Sensory Nerve Endings in Skeletal Muscle

This technique has been developed especially to stain sensory receptors which have been localised intramuscularly by electrophysiological means. Rat intertransverse caudal muscles, removed immediately after death, are fixed for 24 hr in a freshly prepared mixture of absolute ethyl alcohol, 4.5 ml; distilled water, 5 ml; and concentrated HNO_a, 0.1 ml. After a further 24 hr in 10 ml of absolute ethyl alcohol containing 0.1 ml of ammonia solution (sp. gr. 0.88), the muscles are washed in distilled water for 30 min and placed in full strength pyridine for 2 days. They are then washed for 24 hr in distilled water (changed 5-8 times) and left in 2% AgNO₃, in the dark for 3 days at 25 C. Following reduction in 10 ml of 5% formic acid containing 0.4 gm of pyrogallol for 6-24 hr, the specimens are washed briefly in distilled water and stored in pure glycerol. The nerve endings can then be teased out and mounted in glycerol, under cover glasses ringed with a waterproof cement. The advantage of this method is that it gives consistently good staining of receptors and motor end-plates in small muscles of the rat     

Processing Gossypium Microspores for First-Division Chromosomes

A procedure developed for the observation of the first-division chromosomes of the thick-walled microspores of Gossypium is as follows: fixation in 3:1 ethyl alcohol-propionic acid followed by soaking in 70% alcohol for 24 hr; maceration in a 2:1:1 mixture of 15% CrO₃, 10% HNO₃, and 5% HCl for 5-7 min; hardening in 1.1 ethyl alcohol-propionic acid; and staining in acetocarmine.     

Basic Dye Counterstaining of Sections Impregnated by the Golgi-Cox Method

Celloidin blocks of Golgi-Cox impregnated material are cut at 50 μ, the sections collected in 70% alcohol, transferred to a 3:1 mixture of absolute alcohol and chloroform for 2 min, and then stored in xylene or toluene for at least 3 min, or up to 2 wk until processed further. Mounting is done on glass slides which have been coated with fresh egg albumen diluted in 0.2% ammonia water (or a 0.5% solution of dry powdered egg albumen) and then dried at 60°C overnight. For attachment to these coated slides, sections are first soaked for 2-3 min in a freshly prepared mixture of methyl benzoate, 50 ml; benzyl alcohol, 200 ml; chloroform, 150 ml; and then transferred quickly to the slides by means of a brush. After 2-3 min the chloroform evaporates and the celloidin softens. The slides are then immersed in toluene which hardens the celloidin and anchors the sections to the slides. Alcohols of descending concentrations to 40% are followed by alkalinizations, first in: absolute alcohol, 40 ml; strong ammonia water 60 ml, for 2 min, then in: absolute alcohol, 70 ml; strong ammonia water, 30 ml, for 1 hr. Excess alkali is then removed by 70% and 40% alcohol, 2 min each, and a 10 min wash in running tap water. Bleaching in 1% Na₂S₂O₃, for 10 min and washing again in tap water for 10 min completes the process preliminary to staining. The preparations are then stained for 90 min in an aqueous solution of either 0.5% cresylecht violet, neutral red, or Darrow red, buffered at pH 3.6. Dehydration and differentiation in ascending grades of alcohol, clearing with toluene or xylene, and applying a cover glass with a mounting medium having a refractive index of about 1.61 completes the process.     

Selective Staining of Neurosecretory Material in Semithin Epoxy Sections by Gomori's Aldehyde Fuchsin

The epoxy resin was removed from semithin (1 μm) sections by immersing them for 30 sec in sodium methoxide (Mayor et al., J. Biophys. Biochem. Cytol., 9: 909-10, 1961) and then processed as follows: (1) left for 1-3 hr at 60 C in a mixture of formalin, 25 ml; glacial acetic acid, 5 ml; CrO₃, 3 gm; and distilled water, 75 ml: (2) oxidized 10 min in a 1:1:6 v/v mixture of 2.5% KMnO₄, 5% H₂SO₄ and distilled water: (3) bleached in 1% oxalic acid, and (4) stained for 15 min in aldehyde fuchsin, 0.125% in 70% alcohol, or in a 1% aqueous solution of toluidine blue. The neurosecretory material is selectively stained.     

The Use of Papain in Clearing Plant Tissues for Whole Mounts

Materials killed and fixed in FAA (formalin-acetic acid-alcohol) and similar fixatives frequently are difficult to clear for whole mounts because the denatured proteins will not become soluble in NaOH and other clearing agents. If tissues are washed for 3 days in running water, then incubated at 40 C for 5-7 days in 2% papain buffered to pH 7.2 and activated with 15 ml of .02 M Na₂S, cell contents are partly digested. Normal clearing with 5-10% NaOH followed by chloral hydrate (sat. aq.) can then effect complete solublility of cell contents and their removal. Permanent slides can be made after staining (1% safranin O in 50% alcohol for 12 hr is successful), by dehydration through alcohols, clearing in xylene, and mounting in resin.     

Preparing Specimens of Bone and Teeth for Cutting by the Paraffin Method

A method of preparing bone or teeth for sectioning is described which involves the following steps: 48 hr. in 1:10 formalin; 24 hr. in 70% alcohol; decalcification for several days in 10% HNO₃; rinsing and transferring to 2% potassium alum for 12 hr.; rinsing and treating with 5% NaHCO₃ (or Li₂CO₃) for 24 hr.; washing for 12-24 hr.; then passing through ascending grades of alcohol to xylene. In the case of developing teeth, a slightly different procedure is recommended: fixation in Heidenhain's Susa till hard tissue is decalcified; 24 hr. in 96% alcohol (with three changes); 24 hr. in absolute alcohol (with one change); clearing in xylene or chloroform, and embedding in paraffin.     

A HYDROXYL-DEPENDENT SILVER METHOD FOR NERVE AXOPLASM

Axoplasm is selectively impregnated by the following steps: (1) fixation in 10% formalin or in 10% formalin with added sucrose, 15%, and concentrated NH₄OH, 1%, for 1-7 days; (2) frozen sections; (3) extraction of the sections in 95% ethyl alcohol, absolute alcohol, xylene, and 95% ethyl alcohol and absolute alcohol, 1 hr each; (4) distilled water, 3 changes of 10 min each; (5) 20% AgNO₃ (aq.) at 25°C, 30 min; (6) distilled water, 3 changes of 1-2 sec each; (7) 6.9% K₂CO₃, 1 hr; (8) water, 3 changes of about 1 min each; (9) 0.2%AuCl₃, 2 min; (10) distilled water; (11) 5% Na₂S₂O₃, 2 min; (12) washing, clearing and mounting. This procedure is proposed as a simplified stain for axoplasm, with other tissue components remaining unstained. The few reagents necessary suit this method for histochemical investigation of the mechanism of silver staining.     

Acid Orcein-Iron and Acid Orcein-Copper Stains for Elastin

Paraffin sections of formol-fixed tissues stained 4-18 hr in 70% alcohol containing 1% orcein and 1% of concentrated (12 N) HCl by volume yield the familiar purple brown elastin and red nuclei on a pink background. When sections so stained are transferred directly from the stain to 70% alcohol containing 0.02% ferric chloride (FeCl₃·6 H₂O) or 0.02% copper sulfate (CuSO₄·5 H₂O) for a 15 sec to 3 min period, elastin coloration is changed to black or reddish black and chromatin staining to reddish black. The procedure can be counterstained with picro-methyl blue to yield blue collagen and reticulum or with our flavianic acid, ferric chloride, acid fuchsin mixture to give deep yellow background and deep red collagen.     

Protective Paraffin Infiltration of Soft Tissues in Insects to Facilitate Softening of Hard Exoskeletons

This technique can produce serial sections as thin as 5 μ from hard chitin-covered materials of insects or other arthropods. Procedures: Fix with alcoholic Bouin's fluid for 3 hr. Henceforth subject material to partial vacuum in each step to ensure a final proper embedding. Wash with 80% ethanol 2 or 3 times for 2 hr or until the picric acid is largely removed. Dehydrate to 90% ethanol and give 2 changes of n-butanol 2 hr each, and one of a 1:1 n-butanol-paraffin mixture in 56-57° oven for 12 hr. Finally, use 2 baths of pure paraffin, 3 hr each, to complete the infiltration. After the last bath, withdraw the specimen from the paraffin, and remove the superficial paraffin, first mechanically and then with a xylene bath for 4 min. Rinse first with n-butanol, and afterwards with absolute ethanol, 2 min each. The compound eyes are protected with a paraffin covering, the specimen is hydrated with a 1% aqueous solution of detergent for 1 hr and then washed with running tap water. The material is treated with a concentrated sulfuric-nitric mixture (H₂SO₄:HNO₃) for 4 hr to eliminate the exoskeleton. After this treatment, the specimen is washed with running tap water for 12 hr, dehydrated with acetone and then bathed in a 2% solution of celloidin in ethyl acetate to form a protective artificial cuticle. This coating is hardened with 2 quick baths of chloroform, the specimen reembedded in paraffin, and the block cast for sectioning.     

The Fixation of Tissues Vitally Stained with Trypan Blue

The following fixative is recommended for tissues vitally stained with trypan blue: Chloroform, 2 parts; absolute ethyl alcohol, 2 parts; glacial acetic acid, 1 part; mercuric chloride to the point of saturation.

The tissue should be fixed 1 to 2 hours; transferred to 95% ethyl alcohol for 12 hours; to absolute alcohol for 12 to 24 hours; to a mixture of absolute alcohol and xylol for 1/2 hour, and finally to xylol, before embedding in paraffin. Cedar oil may be used for clearing in the place of xylol; in that case the tissues should be transferred from absolute alcohol to a mixture of absolute alcohol and cedar oil for 24 hours before placing in cedar oil alone.

Various counterstains can be used; Mayer's carmalum is excellent.     

The Demonstration of Beta Cells in Pancreatic Islets and Their Tumors

The stain is applied routinely to tissues fixed in 10% buffered formalin (pH near 7.0) or in Bouin's fluid. Bring paraffin section to water as usual and mordant 72 hr in 5% CrCl₃ dissolved in 5% acetic acid. Wash in water and in 70% alcohol and stain 6 hr. Formula of staining solution: new fuchsin, 1% in 70% alcohol, 100 ml; HCl, conc., 2 ml and paraldehyde, 2 ml, mixed together and added to the dye solution; let stand 24 hr before use. After staining, wash in running tap water 5-10 min, rinse in distilled water and counterstain if desired. Dehydration in alcohol, clearing and covering completes the process. When the paraldehyde is obtained from a freshly opened bottle, standardized staining times can be used and thus eliminate the necessity of differentiating individual slides. The granules of beta cells stained deep blue to purple and were demonstrated in the pancreatic islet of man, dog, mouse, frog, guinea pig and rabbit.     

Staining Tissue of the Central Nervous System with Luxol Fast Blue and Neutral Red

The tissue is fixed in 10% neutral saline formalin for 1 day to 3 wk depending on the size of the block, dehydrated and embedded in paraffin. The sections are stained at 57° C for 2 hr, then at 22° C for 30 min, in a 0.0125% solution of Luxol fast blue in 95% alcohol acidified by 0.1% acetic acid. They are differentiated in a solution consisting of: Li₂CO₃, 5.0 gm; LiOH-H₂O, 0.01 gm; and distilled water, 1 liter at 0-1° C, followed by 70% alcohol, and then treated with 0.2% NaHSO₃. They are soaked 1 min in an acetic acid-sodium acetate buffer 0.1 N, pH 5.6, then stained with 0.03% buffered aqueous neutral red. Sections are washed in distilled water, 1 sec, then treated with the following solution: CuSO₄·5H₂O, 0.5 gm; CrK(SO₄)₂·12H₂O, 0.5 gm; 10% acetic acid, 3 ml; and distilled water, 250 ml. Dehydration, clearing and covering complete the process. Myelin sheaths are stained bright blue; meninges and the adventitia of blood vessels are blue; red blood cells are green. Nissl material is stained brilliant red; axon hillocks, axis cylinders, ependyma, nuclei and some cytoplasm of neuroglia, media and endothelium of blood vessels are pink.