A new medium for the enumeration and subculture of bacteria from potable water.

Plate count agar is presently the recommended medium for the standard bacterial plate count (35 degrees C, 48-h incubation) of water and wastewater. However, plate count agar does not permit the growth of many bacteria that may be present in treated potable water supplies. A new medium was developed for use in heterotrophic plate count analyses and for subculture of bacteria isolated from potable water samples. The new medium, designated R2A, contains 0.5 g of yeast extract, 0.5 g of Difco Proteose Peptone no. 3 (Difco Laboratories), 0.5 g of Casamino Acids (Difco), 0.5 g of glucose, 0.5 g of soluble starch, 0.3 g of K2HPO4, 0.05 g of MgSO4 X 7H2O, 0.3 g of sodium pyruvate, and 15 g of agar per liter of laboratory quality water. Adjust the pH to 7.2 with crystalline K2HPO4 or KH2PO4 and sterilize at 121 degrees C for 15 min. Results from parallel studies with spread, membrane filter, and pour plate procedures showed that R2A medium yielded significantly higher bacterial counts than did plate count agar. Studies of the effect of incubation temperature showed that the magnitude of the count was inversely proportional to the incubation temperature. Longer incubation time, up to 14 days, yielded higher counts and increased detection of pigmented bacteria. Maximal bacterial counts were obtained after incubation at 20 degrees C for 14 days. As a tool to monitor heterotrophic bacterial populations in water treatment processes and in treated distribution water, R2A spread or membrane filter plates incubated at 28 degrees C for 5 to 7 days is recommended.(ABSTRACT TRUNCATED AT 250 WORDS)     

Nonphotosynthetic pigmented bacteria in a potable water treatment and distribution system

The occurrence of pigmented bacteria in potable water, from raw source water through treatment to distribution water, including dead-end locations, was compared at sample sites in a large municipal water system. Media used to enumerate heterotrophic bacteria and differentiate pigmented colonies were standard method plate count (SPC), m-SPC, and R2A agars, incubated up to 7 days at 35 degrees C. The predominant pigmented bacteria at most sample locations were yellow and orange, with a small incidence of pink organisms at the flowing distribution site. Seasonal variations were seen, with the yellow and orange organisms shifting in dominance. SPC agar was the least productive medium for both heterotroph counts and pigmented bacteria differentiation. At the flowing distribution site, percentages of pigmented bacteria on SPC medium ranged from 2.3 to 9.67 times less than on m-SPC and from 2.3 to 9.86 times less than on R2A. At the same site, seasonal trends in the percentage of pigmented bacteria were the same for m-SPC and R2A media, and the highest and lowest percentages occurred in the fall and winter, respectively. At site 6, there appeared to be an inverse relationship between the yellow and orange pigmented groups, but upon analysis, this did not hold and all correlations between yellow and orange pigmented bacteria were positive. The study results indicate that pigmented bacteria could readily be detected by using plate counting media developed for heterotroph enumeration in potable waters with incubation periods of 7 days. Pigmented bacteria can be used as an additional marker for monitoring changes in water quality. High numbers of heterotrophs, including pigmented forms, were found at dead-end locations, usually in the absence of a free chlorine residual and when the water temperature was greater than 16 degrees C. The association of some pigmented bacteria with nosocomial and other infections raises concern that the organisms may have originated from the potable water supply. High levels of pigmented bacteria could pose an increased health risk to immunologically compromised individuals. Therefore, the bacterial quality of the distribution water should be controlled to prevent the development of high concentrations of heterotrophic plate count bacteria, including the pigmented forms.     

Nonphotosynthetic pigmented bacteria in a potable water treatment and distribution system.

The occurrence of pigmented bacteria in potable water, from raw source water through treatment to distribution water, including dead-end locations, was compared at sample sites in a large municipal water system. Media used to enumerate heterotrophic bacteria and differentiate pigmented colonies were standard method plate count (SPC), m-SPC, and R2A agars, incubated up to 7 days at 35 degrees C. The predominant pigmented bacteria at most sample locations were yellow and orange, with a small incidence of pink organisms at the flowing distribution site. Seasonal variations were seen, with the yellow and orange organisms shifting in dominance. SPC agar was the least productive medium for both heterotroph counts and pigmented bacteria differentiation. At the flowing distribution site, percentages of pigmented bacteria on SPC medium ranged from 2.3 to 9.67 times less than on m-SPC and from 2.3 to 9.86 times less than on R2A. At the same site, seasonal trends in the percentage of pigmented bacteria were the same for m-SPC and R2A media, and the highest and lowest percentages occurred in the fall and winter, respectively. At site 6, there appeared to be an inverse relationship between the yellow and orange pigmented groups, but upon analysis, this did not hold and all correlations between yellow and orange pigmented bacteria were positive. The study results indicate that pigmented bacteria could readily be detected by using plate counting media developed for heterotroph enumeration in potable waters with incubation periods of 7 days. Pigmented bacteria can be used as an additional marker for monitoring changes in water quality. High numbers of heterotrophs, including pigmented forms, were found at dead-end locations, usually in the absence of a free chlorine residual and when the water temperature was greater than 16 degrees C. The association of some pigmented bacteria with nosocomial and other infections raises concern that the organisms may have originated from the potable water supply. High levels of pigmented bacteria could pose an increased health risk to immunologically compromised individuals. Therefore, the bacterial quality of the distribution water should be controlled to prevent the development of high concentrations of heterotrophic plate count bacteria, including the pigmented forms.     

Heterotrophic plate counts of surface water samples by using impedance methods.

Membrane filtration, spread plating, and pour plating are conventional methods used to determine the heterotrophic plate counts of water samples. Impedance methods were investigated as an alternative to conventional methods, since sample dilution is not required and the bacterial count can be estimated within 24 h. Comparisons of impedance signals obtained with different water samples revealed that capacitance produced faster detection times than conductance. Moreover, the correlation between heterotrophic plate count and detection time was highest (r = 0.966) when capacitance was used. Linear and quadratic regressions of heterotrophic plate count and impedance detection time were affected by incubation temperatures. Regressions between heterotrophic plate counts based on conventional methods and detection times of water samples incubated at less than or equal to 25 degrees C had R2 values of 0.878 to 0.933. However, regressions using detection times of water samples incubated at greater than or equal to 30 degrees C had lower R2 values, even though water samples produced faster detection times. Comparisons between broth-based versions of R2A medium and plate count agar revealed that the latter correlated highly with heterotrophic plate count, provided that water samples were incubated at 25 degrees C and impedance measurements were conducted with the capacitance signal (r = 0.966). When the linear regression of this relationship was tested with 100 water samples, the correlation between predicted and actual log10 CFU milliliter-1 was 0.869. These results indicate that impedance methods provide a suitable alternative to conventional methods.     

Heterotrophic plate counts of surface water samples by using impedance methods.

Membrane filtration, spread plating, and pour plating are conventional methods used to determine the heterotrophic plate counts of water samples. Impedance methods were investigated as an alternative to conventional methods, since sample dilution is not required and the bacterial count can be estimated within 24 h. Comparisons of impedance signals obtained with different water samples revealed that capacitance produced faster detection times than conductance. Moreover, the correlation between heterotrophic plate count and detection time was highest (r = 0.966) when capacitance was used. Linear and quadratic regressions of heterotrophic plate count and impedance detection time were affected by incubation temperatures. Regressions between heterotrophic plate counts based on conventional methods and detection times of water samples incubated at less than or equal to 25 degrees C had R2 values of 0.878 to 0.933. However, regressions using detection times of water samples incubated at greater than or equal to 30 degrees C had lower R2 values, even though water samples produced faster detection times. Comparisons between broth-based versions of R2A medium and plate count agar revealed that the latter correlated highly with heterotrophic plate count, provided that water samples were incubated at 25 degrees C and impedance measurements were conducted with the capacitance signal (r = 0.966). When the linear regression of this relationship was tested with 100 water samples, the correlation between predicted and actual log10 CFU milliliter-1 was 0.869. These results indicate that impedance methods provide a suitable alternative to conventional methods.     

Bacterial colonization of domestic reverse-osmosis water filtration units

We have analyzed the bacterial content of water from the reservoirs of 300 reverse-osmosis units installed in households. The heterotrophic plate counts on R2A medium (20 and 35 degrees C) ranged from 0 to 10(7) colony forming units per millilitre (cfu/mL). Most reservoirs contained water with bacterial counts between 10(4) and 10(5) cfu/mL. The bacteria identified were Pseudomonas (not aeruginosa), Alcaligenes or Moraxella, Acinetobacter, Flavobacterium, and Chromobacterium. This report emphasizes the importance of bacterial colonization by heterotrophic bacteria in water reservoirs from domestic reverse-osmosis units.     

The use of R2A medium and the spread plate method for the enumeration of heterotrophic bacteria in drinking water

The pour plate method with yeast extract agar and a 3 d incubation period is the standard method in the UK for the enumeration of heterotrophic bacteria in drinking water. We have compared the standard method with other procedures using the spread plate technique, R2A medium and a longer incubation period. The R2A spread plate method with a 7 d incubation period gave an average estimate of bacterial numbers 520 times greater than for the standard method. This alternative method is recommended for obtaining a more accurate estimate of heterotrophic bacterial populations in drinking water.     

Comparison of plate count agar and R2A medium for enumeration of heterotrophic bacteria in natural mineral water

In order to recover as many viable bacteria as possible from natural mineral water, in this study we have compared the counts obtained with the standard method (pour plate procedure with Plate Count Agar (PCA)) and counts with alternative test methods (PCA/spread plates, R2A medium/pour plates and R2A medium/spread plates). The results showed that counts with R2A medium/spread plates at 22°C and after a 7-day incubation period were more than 343% higher than those obtained with PCA/pour plate method. At 37°C and after a 3-day incubation period, the R2A pour plate technique gave counts about 368% greater than for the standard method. Moreover, while Pseudomonas, Comamonas and Acinetobacter species were isolated both from PCA and R2A medium, Flavobacterium spp. and Arthrobacter spp. were isolated only from R2A medium. For its higher productivity, R2A medium should be recommended for heterotrophic plate counts in natural mineral water.     

Alterations in the major heterotrophic bacterial populations isolated from a still bottled mineral water

The heterotrophic bacterial population of a bottled mineral water stored in returnable glass bottles and in polyvinyl chloride (PVC) bottles at room temperature was studied over 9-12 months. The plate counts in R2A medium incubated at 22 degrees and 37 degrees C were low initially, increasing to 10(4)-10(5) cfu/ml within a few days of bottling. The number of bacteria recovered at 22 degrees C from PVC bottles was fairly constant during the storage period, but the population isolated at 37 degrees C decreased markedly after storage for 1 year. The major components of the population were Pseudomonas strains, one of which was identified as Pseudomonas vesicularis. Major changes took place during storage; two groups of bacteria (B and C) were dominant initially, but during the latter period of storage other groups (F, G and H) increased in number.     

Comparison of methods for enumeration of selected coliforms exposed to ozone

mT7 medium performed no better than m-Endo medium in enumerating cells of Escherichia coli and Citrobacter freundii exposed to ozone. Also, there was no difference in the plate count of heterotrophic bacteria in ozonated raw water determined on modified Henrici agar or R2A agar. Statistically significant differences were seen between bacteria and the type of water in which they were suspended during ozonation.     

Comparison of methods for enumeration of selected coliforms exposed to ozone.

mT7 medium performed no better than m-Endo medium in enumerating cells of Escherichia coli and Citrobacter freundii exposed to ozone. Also, there was no difference in the plate count of heterotrophic bacteria in ozonated raw water determined on modified Henrici agar or R2A agar. Statistically significant differences were seen between bacteria and the type of water in which they were suspended during ozonation.     

Isolation and distribution of oligotrophic marine bacteria.

A useful plate culture method for isolating oligotrophic bacteria found in the low-nutrient environment of the open sea has been developed. The method uses a glass-fiber filter substitute for agar. Nutritional requirements of oligotrophic bacteria consisted of a dilute mutrient solution containing 16.8 mg C/l total organic carbon aseptically added to the sterilized filter. Distribution of bacteria in oceanic and neritic seawater was determined using the membrane filter method. In the case of seawater containing less than 0.5 mg/l dissolved carbohydrates, plate counts of oligotrophic bacteria were found to be several- to 100-fold greater than the heterotrophic bacterial counts enumerated by standard methods routinely used for enumeration. However, in seawater containing approximately over 0.5 mg/l dissolved carbohydrates, heterotrophic bacterial counts were 10-fold greater than oligotrophic bacterial counts.     

Application of laser scanning for the rapid and automated detection of bacteria in water samples

It is widely accepted that the heterotrophic plate count method may not support the growth of all viable bacteria which may be present within a water sample and that alternative procedures using 'viability markers' may yield additional information. In this study, ChemChrome B (CB), which is converted to a fluorescent product by esterase activity, was used to stain viable bacteria (captured by membrane filtration) from potable water samples. The labelled bacteria from each sample were subsequently enumerated using a novel laser scanning instrument (ChemScan). Analysis of 107 potable water samples using this procedure demonstrated the presence of a significantly greater number of bacteria than were detected by culture (z-test, P < 0.05). The mean number of bacteria isolated by culture on R2A agar incubated at 22 degrees C for 7 d was only 25.2% of the total number of viable bacteria detected using the CB/ChemScan viability assay. Further analysis of 81 water samples using a 5-cyano-2,3,4-tolyl-tetrazolium chloride (CTC) viability assay also demonstrated the presence of many viable bacteria which were not capable of growth under the culture conditions employed in this study. However, the results indicate that ChemChrome B has the ability to stain a significantly greater number of heterotrophs than CTC (z-test, P < 0.05). In contrast, six potable waters were identified in which the CTC viability assay resulted in counts greater than those obtained using CB. The ChemScan instrument was successfully used for rapid and accurate enumeration of labelled micro-organisms, allowing information on the total viable microbial load of a water sample to be determined within 1 h. Furthermore, the ChemScan system has the potential for use in detecting specific organisms labelled with fluorescently-labelled antibodies or nucleic acid probes.     

Characterization of dysgonic, heterotrophic bacteria from drinking water.

Only a small percentage of the heterotrophic bacteria encountered in water distribution systems are identifiable, because of these organisms fail to grow on the conventional media used for biochemical characterization. Organisms that would not subculture from the same standard plate count agar used for initial isolation were successfully subcultured on a low-nutrient medium, R3A. These cultures were then inoculated to a modified O/F base medium containing specific substrates. This, combined with a lower incubation temperature (30 degrees C), increased the enzymatic activity of many of the organisms. These reactions established a groundwork for tentative taxonomy.     

Characterization of dysgonic, heterotrophic bacteria from drinking water

Only a small percentage of the heterotrophic bacteria encountered in water distribution systems are identifiable, because of these organisms fail to grow on the conventional media used for biochemical characterization. Organisms that would not subculture from the same standard plate count agar used for initial isolation were successfully subcultured on a low-nutrient medium, R3A. These cultures were then inoculated to a modified O/F base medium containing specific substrates. This, combined with a lower incubation temperature (30 degrees C), increased the enzymatic activity of many of the organisms. These reactions established a groundwork for tentative taxonomy.     

Statistical approach for comparison between methods of bacterial enumeration in drinking water

A general statistical procedure based on the likelihood ratio test is presented for the purpose of comparing estimates of mean bacterial density derived from different sets of data. This approach is much more appropriate than the conventional ways of analyzing bacteriological results (e.g., analysis of variance) which usually require previous transformation of the data. An illustrative application of the method compares three distinct titration techniques for enumerating heterotrophic bacteria in drinking water at 20°C incubation temperature. It was shown that both the standard plate count (SPC) and the membrane filter (MF) procedures supplied substantially the same information, whereas the microplate technique using the most probable number (MPN) for total bacterial enumeration could yield considerably different estimates: MPN values were significantly lower in three cases and significantly higher in one case out of a total of five experiments. The results consistently indicate a strong interaction between the technique used and the sample analyzed. Three different media (nutrient agar, R-2A low nutrient agar and m-SPC agar) were then evaluated for enumerating heterotrophic bacteria, using the MF technique at 48, 72 and 96 h of incubation time at 20°C. Although the media recovered approximately the same numbers of bacteria after 96 h of incubation, statistically significant discrepancies occurred after intermediate periods of incubation, perhaps because the relative rates of bacterial growth differed among media.     

Comparison of Gelman and Millipore Membrane Filters for Enumerating Fecal Coliform Bacteria

Tests of two leading brands of membrane filters used for enumerating fecal coliform bacteria showed that Gelman GN-6 filters recovered statistically more colonies of bacteria than did Millipore HAWG 047SO filters from pure cultures incubated at either 35 C (the optimal growth temperature) or 44.5 C (the standard temperature for the fecal coliform test). Standard membrane filter procedures with M-FC broth base were used to enumerate the organisms. Densities of colonies incubated on Gelman filters at 44.5 C averaged 2.3 times greater than those on Millipore filters. Plate counts of the bacteria at both temperatures indicated that incubation at 44.5 C did not inhibit propagation of fecal coliform bacteria. For the pour plates, M-FC broth base plus 1.5% agar was used. This modified medium compared favorably to plate count agar for enumerating Escherichia coli. At 35 and 44.5 C, colony counts on Gelman filters agreed closely with plate counts prepared concurrently, but Millipore counts were consistently lower than plate counts, especially at 44.5 C. Comparative analyses of river water for fecal coliform bacteria by the membrane filter technique gave results comparable to those for the pure cultures.     

Microbiological and virological analysis of water from two water filtration plants and their distribution systems

The microbial flora of the water produced by two water filtration plants and their drinking water distribution system were evaluated: the Pont-Viau (PV) and the Repentigny (RE) water filtration plants. Untreated water entering the plants contained 3.6 (PV) and 16.8 most probable number of infectious units (mpniu)/L (RE) enteric viruses and total coliform bacteria counts were 300,000 (PV) and 500,000 cfu/L (RE). Treated water leaving the plant was essentially free of all the bacterial indicators measured (total, stressed, and fecal coliforms; Aeromonas hydrophila; Pseudomonas aeruginosa; Clostridium perfringens; enterococci) as well as of human enteric viruses. Heterotrophic plate counts at 20 and 35 degrees C were low in the freshly treated water leaving the plants, but bacterial regrowth was observed in both distribution systems at all sampling sites. Average counts for the heterotrophic plate count (20 degrees C) were between 10(6) and 10(7) cfu/L and counts were clearly increased with the distance from the plant. The most numerous bacterial genera encountered were Bacillus, Flavobacterium, and Pseudomonas (nonaeruginosa).     

Improved methods for the enumeration of heterotrophic bacteria in bottled mineral waters

At this time the European Union regulations require that the heterotrophic plate counts (HPC) of mineral waters be assessed at two recovery temperatures: 22 degrees C for 72 h and 37 degrees C for 24 h. This procedure is time consuming and expensive. Development of new rapid methods for microbiological assessment of the microbial flora in the bottled water is an industry-driven need.The objectives of this work were to develop a method for the HPC that utilises only one recovery temperature and one incubation period and evaluate the use of, the LIVE/DEAD(R) BacLight Bacterial Viability Kit, 5-cyano-2,3-ditotyl tetrazolium chloride (CTC) and impedance methods to enumerate viable bacteria in bottled mineral water.Results showed that incubation at 30 degrees C could be used instead of incubation at 22 degrees C and 37 degrees C. Good correlation exists between counts at 30 degrees C and counts at 22 degrees C (r>0.90) and all the pathogens important in mineral water analyses grow similarly at 30 degrees C and 37 degrees C during 24 h.It was demonstrated that impedance methods might be useful to the mineral water industry as a rapid indicator of microbiological quality of the water.Results obtained with BacLight and CTC were similar to those obtained with plate counts.     

Factors influencing the cultivability of lake water bacteria

Counting bacteria in natural water samples by cultivation yields only low recovery efficiencies (ca. 1%), compared to total counts obtained after 4,6-diamidino-2-phenylindol (DAPI) staining. In order to optimize the cultivation of heterotrophic planktonic bacteria from Lake Constance (Germany), selected parameters of the medium composition were modified. The most important factor was the concentration of organic substrate (nutrient broth plus yeast extract), which significantly influenced the "most probable number" obtained in liquid growth medium. Reduced oxygen concentrations (3-12%) lowered the "most probable number". Addition of N-acyl homoserine lactones to the medium increased the cultivability slightly. Low substrate concentrations [0.03-0.06% (w/v)], an incubation atmosphere of 21% oxygen at 16 degrees C for 4 weeks were optimal and increased the cultivability ("most probable number" related to total bacterial counts) to an average cultivability of 18+/-11%, (n=8). The results indicate that cultivabilities of heterotrophic bacteria from lakewater samples can be significantly increased by modifying the cultivation methods.