Interpenetrating Triphase Cobalt‐Based Nanocomposites as Efficient Bifunctional Oxygen Electrocatalysts for Long‐Lasting Rechargeable Zn–Air Batteries

Rational construction of atomic‐scale interfaces in multiphase nanocomposites is an intriguing and challenging approach to developing advanced catalysts for both oxygen reduction (ORR) and evolution reactions (OER). Herein, a hybrid of interpenetrating metallic Co and spinel Co₃O₄ “Janus” nanoparticles stitched in porous graphitized shells (Co/Co₃O₄@PGS) is synthesized via ionic exchange and redox between Co²⁺ and 2D metal–organic‐framework nanosheets. This strategy is proven to effectively establish highways for the transfer of electrons and reactants within the hybrid through interfacial engineering. Specifically, the phase interpenetration of mixed Co species and encapsulating porous graphitized shells provides an optimal charge/mass transport environment. Furthermore, the defect‐rich interfaces act as atomic‐traps to achieve exceptional adsorption capability for oxygen reactants. Finally, robust coupling between Co and N through intimate covalent bonds prohibits the detachment of nanoparticles. As a result, Co/Co₃O₄@PGS outperforms state‐of‐the‐art noble‐metal catalysts with a positive half‐wave potential of 0.89 V for ORR and a low potential of 1.58 V at 10 mA cm^?2 for OER. In a practical demonstration, ultrastable cyclability with a record lifetime of over 800 h at 10 mA cm^?2 is achieved by Zn–air batteries with Co/Co₃O₄@PGS within the rechargeable air electrode.     

Interactions of tropospheric CO2 and O3 enrichments and moisture variations on microbial biomass and respiration in soil

Soil microbial biomass C (C_mic) is a sensitive indicator of trends in organic matter dynamics in terrestrial ecosystems. This study was conducted to determine the effects of tropospheric CO₂ or O₃ enrichments and moisture variations on total soil organic C (C_org), mineralizable C fraction (C_Min), C_mic, maintenance respiratory (qCO₂) or C_mic death (qD) quotients, and their relationship with basal respiration (BR) rates and field respiration (FR) fluxes in wheat‐soybean agroecosystems. Wheat (Triticum aestivum L.) and soybean (Glycine max. L. Merr) plants were grown to maturity in 3‐m dia open‐top field chambers and exposed to charcoal‐filtered (CF) air at 350 μL CO₂ L^?1; CF air + 150 μL CO₂ L^?1; nonfiltered (NF) air + 35 nL O₃ L^?1; and NF air + 35 nL O₃ L^?1 + 150 μL CO₂ L^?1 at optimum (? 0.05 MPa) and restricted soil moisture (? 1.0 ± 0.05 MPa) regimes. The + 150 μL CO₂ L^?1 additions were 18 h d^?1 and the + 35 nL O₃ L^?1 treatments were 7 h d^?1 from April until late October. While C_org did not vary consistently, C_Min, C_mic and C_mic fractions increased in soils under tropospheric CO₂ enrichment (500 μL CO₂ L^?1) and decreased under high O₃ exposures (55 ± 6 nL O₃ L^?1 for wheat; 60 ± 5 nL O₃ L^?1 for soybean) compared to the CF treatments (25 ± 5 nL O₃ L^?1). The qCO₂ or qD quotients of C_mic were also significantly decreased in soils under high CO₂ but increased under high O₃ exposures compared to the CF control. The BR rates did not vary consistently but they were higher in well‐watered soils. The FR fluxes were lower under high O₃ exposures compared to soils under the CF control. An increase in C_mic or C_mic fractions and decrease in qCO₂ or qD observed under high CO₂ treatment suggest that these soils were acting as C sinks whereas, reductions in C_mic or C_mic fractions and increase in qCO₂ or qD in soils under elevated tropospheric O₃ exposures suggest the soils were serving as a source of CO₂.     

Hydrothermal Synthesis of Monolithic Co3Se4 Nanowire Electrodes for Oxygen Evolution and Overall Water Splitting with High Efficiency and Extraordinary Catalytic Stability

Cobalt selenide has been proposed to be an effective low‐cost electrocatalyst toward the oxygen evolution reaction (OER) due to its well‐suited electronic configuration. However, pure cobalt selenide has by far still exhibited catalytic activity far below what is expected. Herein, this paper for the first time reports the synthesis of new monoclinic Co₃Se₄ thin nanowires on cobalt foam (CF) via a facile one‐pot hydrothermal process using selenourea. When used to catalyze the OER in basic solution, the conditioned monolithic self‐supported Co₃Se₄/CF electrode shows an exceptionally high catalytic current of 397 mA cm^?2 at a low overpotential (η) of 320 mV, a small Tafel slope of 44 mV dec^?1, a turnover frequency of 6.44 × 10^?2 s^?1 at η = 320 mV, and excellent electrocatalytic stability at various current densities. Furthermore, an electrolyzer is assembled using two symmetrical Co₃Se₄/CF electrodes as anode and cathode, which can deliver 10 and 20 mA cm^?2 at low cell voltages of 1.59 and 1.63 V, respectively. More significantly, the electrolyzer can operate at 10 mA cm^?2 over 3500 h and at 100 mA cm^?2 for at least 2000 h without noticeable degradation, showing extraordinary operational stability.     

Thin Film Co3O4/TiO2 Heterojunction Solar Cells

Co₃O₄ is investigated as a light absorber for all‐oxide thin‐film photovoltaic cells because of its nearly ideal optical bandgap of around 1.5 eV. Thin film TiO₂/Co₃O₄ heterojunctions are produced by spray pyrolysis of TiO₂ as a window layer, followed by pulsed laser deposition of Co₃O₄ as a light absorbing layer. The photovoltaic performance is investigated as a function of the Co₃O₄ deposition temperature and a direct correlation is found. The deposition temperature seems to affect both the crystallinity and the morphology of the absorber, which affects device performance. A maximum power of 22.7 μW cm^?2 is obtained at the highest deposition temperature (600 °C) with an open circuit photovoltage of 430 mV and a short circuit photocurrent density of 0.2 mA cm^?2. Performing deposition at 600 °C instead of room temperature improves power by an order of magnitude and reduces the tail states (Urbach edge energy). These phenomena can be explained by larger grains that grows at high temperature, as opposed to many nucleation events that occur at lower temperature.     

Metal‐Free 2D/2D Heterojunction of Graphitic Carbon Nitride/Graphdiyne for Improving the Hole Mobility of Graphitic Carbon Nitride

The design and synthesis of efficient metal‐free photoelectrocatalysts for water splitting are of great significance, as nonmetal elements are generally earth abundant and environment friendly. As a typical metal‐free semiconductor, g‐C3N4 has received much attention in the field of photocatalytic water splitting. However, the poor photoinduced hole mobility of g‐C₃N₄ restrains its catalytic performance. Herein, for the first time, graphdiyne (GDY) is used to interact with g‐C₃N₄ to construct a metal‐free 2D/2D heterojunction of g‐C₃N₄/GDY as an efficient photoelectrocatalyst for water splitting. The g‐C₃N₄/GDY photocathode exhibits enhanced photocarriers separation due to excellent hole transfer nature of graphdiyne and the structure of 2D/2D heterojunction of g‐C₃N₄/GDY, realizing a sevenfold increase in electron life time (610 μs) compared to that of g‐C₃N₄ (88 μs), and a threefold increase in photocurrent density (?98 μA cm^?2) compared to that of g‐C₃N₄ photocathode (?32 μA cm^?2) at a potential of 0 V versus normal hydrogen electrode (NHE) in neutral aqueous solution. The photoelectrocatalytic performance can be further improved by fabricating Pt@g‐C₃N₄/GDY, which displays an photocurrent of ?133 μA cm^?2 at a potential of 0 V versus NHE in neutral aqueous solution. This work provides a new strategy for the design of efficient metal‐free photoelectrocatalysts for water splitting.     

High‐Performance Ultrathin Co3O4 Nanosheet Supported PdO/CeO2 Catalysts for Methane Combustion

Efficient utilization of methane via catalytic complete combustion is a very important pathway to realize energy efficiency and pollution reduction. From the viewpoint of structural design, herein a green water‐phase route is developed to prepare ultrathin Co(OH)₂ nanosheet supported Pd catalysts. As a platform, the as‐obtained Pd/Co(OH)₂ nanosheets are able to be further used to load CeO₂ nanoparticles to form 2D nanostructured Pd/CeO₂/Co(OH)₂ multicomponent hybrids, and further calcination can result in the final well‐crystallized ultrathin Co₃O₄ nanosheet supported PdO/CeO₂ catalysts. Catalytic tests on methane combustion reveal that CeO₂ as a catalytic assistant greatly boosts the catalytic performance of PdO/Co₃O₄ via strong synergetic effects with Pd species and Co₃O₄ components. The best sample of PdO/CeO₂‐0.1/Co₃O₄ exhibits surprisingly enhanced light‐off activity, indicating that such 2D Co₃O₄ nanosheet supported nanocatalysts might show promising prospect for heterogeneous catalysis.     

Effects of chronic ozone and elevated atmospheric CO2 concentrations on ribulose-1,5-bisphosphate in soybean (Glycine max)

Ribulose-1,5-bisphosphate (RuBP) pool size was determined at regular intervals during the growing season to understand the effects of tropospheric ozone concentrations, elevated atmospheric carbon dioxide concentrations and their interactions on the photosynthetic limitation by RuBP regeneration. Soybean (Glycine max [L.] Merr. cv. Essex) was grown from seed to maturity in open-top field chambers in charcoal-filtered air (CF) either without (22 nmol O₃ mol^?1) or with added O₃ (83 nmol mol^?1) at ambient (AA, 369 μmol CO₂ mol^?1) or elevated CO₂ (710 μmol mol^?1). The RuBP pool size generally declined with plant age in all treatments when expressed on a unit leaf area and in all treatments but CF-AA when expressed per unit ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco; EC 4.1.1.39) binding site. Although O₃ in ambient CO₂ generally reduced the RuBP pool per unit leaf area, it did not change the RuBP pool per unit Rubisco binding site. Elevated CO₂, in CF or O₃-fumigated air, generally had no significant effect on RuBP pool size, thus mitigating the negative O₃ effect. The RuBP pools were below 2 mol mol^?1 binding site in all treatments for most of the season, indicating limiting RuBP regeneration capacity. These low RuBP pools resulted in increased RuBP regeneration via faster RuBP turnover, but only in CF air and during vegetative and flowering stages at elevated CO₂. Also, the low RuBP pool sizes did not always reflect RuBP consumption rates or the RuBP regeneration limitation relative to potential carboxylation (%RuBP). Rather, %RuBP increased linearly with decrease in the RuBP pool turnover time. These data suggest that amelioration of damage from O₃ by elevated atmospheric CO₂ to the RuBP regeneration may be in response to changes in the Rubisco carboxylation.     

High‐Performance Flexible Solid‐State Ni/Fe Battery Consisting of Metal Oxides Coated Carbon Cloth/Carbon Nanofiber Electrodes

Aqueous Ni/Fe batteries have great potential as flexible energy storage devices, owing to their low cost, low toxicity, high safety, and high energy density. However, the poor cycling stability has limited the widely expected application of Ni/Fe batteries, while the use of heavy metal substrates cannot meet the basic requirement for flexible devices. In this work, a flexible type of solid‐state Ni/Fe batteries with high energy and power densities is rationally developed using needle‐like Fe₃O₄ and flake‐like NiO directly grown on carbon cloth/carbon nanofiber (CC–CF) matrix as the anode and cathode, respectively. The hierarchical CC–CF substrate with high electric conductivity and good flexibility serves as an ideal support for guest active materials of nanocrystalline Fe₃O₄ and NiO, which can effectively buffer the volume change giving rise to good cycling ability. By utilizing a gel electrolyte, a robust and mechanically flexible quasi‐solid‐state Ni/Fe full cell can be assembled. It demonstrates optimal electrochemical performance, such as high energy density (5.2 mWh cm^?3 and 94.5 Wh Kg^?1), high power density (0.64 W cm^?3 and 11.8 KW Kg^?1), together with excellent cycling ability. This work provides an example of solid‐state alkaline battery with high electrochemical performance and mechanical flexibility, holding great potential for future flexible electronic devices.     

Robust Sub‐Monolayers of Co3O4 Nano‐Islands: A Highly Transparent Morphology for Efficient Water Oxidation Catalysis

The scalable synthesis of highly transparent and robust sub‐monolayers of Co₃O₄ nano‐islands, which efficiently catalyze water oxidation, is reported. Rapid aerosol deposition of Co₃O₄ nanoparticles and thermally induced self‐organization lead to an ultra‐fine nano‐island morphology with more than 94% light transmission at a wavelength of 500 nm. These transparent sub‐monolayers demonstrate a remarkable mass‐weighted water oxidation activity of 2070–2350 A g_Co3O4^?1 and per‐metal turnover frequency of 0.38–0.62 s^?1 at an overpotential of 400 mV in 1 m NaOH aqueous solution. This mixed valent cobalt oxide structure exhibits excellent long‐term electrochemical and mechanical stability preserving the initial catalytic activity over more than 12 h of constant current electrolysis and 1000 consecutive voltammetric cycles. The potential of the Co₃O₄ nano‐islands for photoelectrochemical water splitting has been demonstrated by incorporation of co‐catalysts in GaN nanowire photoanodes. The Co₃O₄‐GaN photoanodes reveal significantly reduced onset overpotentials, improved photoresponse and photostability compared to the bare GaN ones. These findings provide a highly performing catalyst structure and a scalable synthesis method for the engineering of efficient photoanodes for integrated solar water‐splitting cells.     

A Robust Route to Co2(OH)2CO3 Ultrathin Nanosheets with Superior Lithium Storage Capability Templated by Aspartic Acid‐Functionalized Graphene Oxide

Two‐dimensional (2D) nanomaterials are widely recognized as an important class of functional materials possessing superior electrochemical reaction kinetics. Herein, an L‐aspartic acid (AA)‐modified graphene oxide (GO) templating strategy is developed to in situ yield ultrathin (i.e., ≈5 nm) cobalt carbonate hydroxide (Co₂(OH)₂CO₃) nanosheets as advanced anode materials of lithium ion batteries. Notably, the covalent tethering of AA on the GO surface renders a high density of carboxyl groups that impart effective loading of Co‐containing precursors and subsequent growth into Co₂(OH)₂CO₃ nanosheets bridging adjacent GO layers. The lasagna‐like Co₂(OH)₂CO₃‐GO nanocomposites exhibit an ultrahigh lithium storage capacity of 1770 mAh g^?1 after 500 cycles at 100 mA g^?1. It is noteworthy that the cycled Co₂(OH)₂CO₃ phase separates into homogeneously dispersed Co(OH)₂ and CoCO₃ phases with two different charge plateaus at ≈1.2 and 2.0 V, respectively, which effectively inhibit large‐scale homophase coarsening of Co, Li₂CO₃, and LiOH. The much shortened Li⁺/e^? transfer distance enabled by individual ultrathin Co₂(OH)₂CO₃ nanosheet together with robust layer‐by‐layer assembled nanostructure of Co₂(OH)₂CO₃‐GO confers the superior electrochemical reactivity and mechanical stability. As such, the amino acid‐modified GO templating strategy may represent a simple yet robust means of crafting a variety of 2D nanostructured composites of interest for energy storage applications.     

Different Tolerance to Light Stress in NO3−- and NH4+-Grown Phaseolus vulgaris L.

Abstract: NH₄⁺‐grown plants are more sensitive to light stress than NO₃^?‐grown plants, as indicated by reduced growth and intervenal chlorosis of French bean (Phaseolus vulgaris L.). Measuring the time course of F_v/F_m ratios under photoinhibitory light regimes did not reveal any difference in PS II damage between NO₃^?‐ and NH₄⁺‐grown plants, in spite of some indications of higher energy quenching in NO₃^?‐grown plants. Also, a direct action of NH₄⁺ as an uncoupler at the thylakoid membrane could be excluded. Instead, biochemical analysis revealed enhanced lipid peroxidation and higher activity of scavenging enzymes in NH₄⁺‐grown plants indicating that these plants make use of metabolic pathways with stronger radical formation. Evidence for higher rates of photorespiration in NH₄⁺‐grown plants came from experiments showing that electron flux and O₂ evolution were decreased by SHAM in NH₄⁺‐grown plants, and by antimycin A in NO₃^?‐grown plants. Further, the comparison of electron flux and of photoacoustic measurements of O₂ evolution suggested that in NH₄⁺‐grown plants the Mehler reaction was also increased, at least in the induction phase. However, the major cause of N form‐dependent stress sensitivity is assumed to be in the coupling between photosynthesis and respiration, i.e., NO₃^?‐grown plants can utilize the TCA cycle for the generation of C skeletons for amino acid synthesis, thus improving the ATP: reductant balance, whereas NH₄⁺‐grown plants have enhanced rates of photorespiration.     

Influence of carbon dioxide enrichment, ozone and nitrogen fertilization on cotton (Gossypium hirsutum L.) leaf and root composition

The objective of this study was to test whether elevated [CO₂], [O₃] and nitrogen (N) fertility altered leaf mass per area (LMPA), non‐structural carbohydrate (TNC), N, lignin (LTGA) and proanthocyanidin (PA) concentrations in cotton (Gossypium hirsutum L.) leaves and roots. Cotton was grown in 14 dm³ pots with either sufficient (0·8 g N dm ^{? 3}) or deficient (0·4 and 0·2 g N dm ^{? 3}) N fertilization, and treated in open‐top chambers with either ambient or elevated ( + 175 and + 350 μ mol mol ^{? 1}) [CO₂] in combination with either charcoal‐filtered air (CF) or non‐filtered air plus 1·5 times ambient [O₃]. At about 50 d after planting, LMPA, starch and PA concentrations in canopy leaves were as much as 51–72% higher in plants treated with elevated [CO₂] compared with plants treated with ambient [CO₂], whereas leaf N concentration was 29% lower in elevated [CO₂]‐treated plants compared with controls. None of the treatments had a major effect on LTGA concentrations on a TNC‐free mass basis. LMPA and starch levels were up to 48% lower in plants treated with elevated [O₃] and ambient [CO₂] compared with CF controls, although the elevated [O₃] effect was diminished when plants were treated concurrently with elevated [CO₂]. On a total mass basis, leaf N and PA concentrations were higher in samples treated with elevated [O₃] in ambient [CO₂], but the difference was much reduced by elevated [CO₂]. On a TNC‐free basis, however, elevated [O₃] had little effect on tissue N and PA concentrations. Fertilization treatments resulted in higher PA and lower N concentrations in tissues from the deficient N fertility treatments. The experiment showed that suppression by elevated [O₃] of LMPA and starch was largely prevented by elevated [CO₂], and that interpretation of [CO₂] and [O₃] effects should include comparisons on a TNC‐free basis. Overall, the experiment indicated that allocation to starch and PA may be related to how environmental factors affect source–sink relationships in plants, although the effects of elevated [O₃] on secondary metabolites differed in this respect.     

Co–B Nanoflakes as Multifunctional Bridges in ZnCo2O4 Micro‐/Nanospheres for Superior Lithium Storage with Boosted Kinetics and Stability

Transition metal oxides hold great promise as high‐energy anodes in next‐generation lithium‐ion batteries. However, owing to the inherent limitations of low electronic/ionic conductivities and dramatic volume change during charge/discharge, it is still challenging to fabricate practically viable compacted and thick TMO anodes with satisfactory electrochemical performance. Herein, with mesoporous cobalt–boride nanoflakes serving as multifunctional bridges in ZnCo₂O₄ micro‐/nanospheres, a compacted ZnCo₂O₄/Co–B hybrid structure is constructed. Co–B nanoflakes not only bridge ZnCo₂O₄ nanoparticles and function as anchors for ZnCo₂O₄ micro‐/nanospheres to suppress the severe volume fluctuation, they also work as effective electron conduction bridges to promote fast electron transportation. More importantly, they serve as Li⁺ transfer bridges to provide significantly boosted Li⁺ diffusivity, evidenced from both experimental kinetics analysis and density functional theory calculations. The mesopores within Co–B nanoflakes help overcome the large Li⁺ diffusion barriers across 2D interfaces. As a result, the ZnCo₂O₄/Co–B electrode delivers high gravimetric/volumetric/areal capacities of 995 mAh g^?1/1450 mAh cm^?3/5.10 mAh cm^?2, respectively, with robust rate capability and long‐term cyclability. The distinct interfacial design strategy provides a new direction for designing compacted conversion‐type anodes with superior lithium storage kinetics and stability for practical applications.     

Comparison of measured and EF5-r-derived N2O fluxes from a spring-fed river

There is considerable uncertainty in the estimates of indirect N₂O emissions as defined by the Intergovernmental Panel on Climate Change's (IPCC) methodology. Direct measurements of N₂O yields and fluxes in aquatic river environments are sparse and more data are required to determine the role that rivers play in the global N₂O budget. The objectives of this research were to measure the N₂O fluxes from a spring‐fed river, relate these fluxes to the dissolved N₂O concentrations and NO₃‐N loading of the river, and to try to define the indirect emission factor (EF5‐r) for the river. Gas bubble ebullition was observed at the river source with bubbles containing 7.9 μL N₂O L^?1. River NO₃‐N and dissolved N₂O concentrations ranged from 2.5 to 5.3 mg L^?1 and 0.4 to 1.9 μg N₂O‐N L^?1, respectively, with N₂O saturation reaching 404%. Floating headspace chambers were used to sample N₂O fluxes. N₂O‐N fluxes were significantly related to dissolved N₂O‐N concentrations (r²=0.31) but not to NO₃‐N concentrations. The N₂O‐N fluxes ranged from 38 to 501 μg m^?2 h^?1, averaging 171 μg m^?2 h^?1 (±SD 85) overall. The measured N₂O‐N fluxes equated to an EF5‐r of only 6.6% of that calculated using the IPCC methodology, and this itself was considered to be an overestimate because of the degassing of antecedent dissolved N₂O present in the groundwater that fed the river.     

Comparison of measured and EF5-r-derived N2O fluxes from a spring-fed river

There is considerable uncertainty in the estimates of indirect N₂O emissions as defined by the intergovernmental panel on climate change's (IPCC) methodology. Direct measurements of N₂O yields and fluxes in aquatic river environments are sparse and more data are required to determine the role that rivers play in the global N₂O budget. The objectives of this research were to measure the N₂O fluxes from a spring‐fed river, relate these fluxes to the dissolved N₂O concentrations and NO₃‐N loading of the river, and to try and define the indirect emission factor (EF5‐r) for the river. Gas bubble ebullition was observed at the river source with bubbles containing 7.9 μL N₂O L^?1. River NO₃‐N and dissolved N₂O concentrations ranged from 2.5 to 5.3 mg L^?1 and 0.4 to 1.9 μg N₂O‐N L^?1, respectively, with N₂O saturation reaching 404%. Floating headspace chambers were used to sample N₂O fluxes. N₂O‐N fluxes were significantly related to dissolved N₂O‐N concentrations (r²=30.6) but not to NO₃‐N concentrations. The N₂O‐N fluxes ranged from 38–501 μg m^?2 h^?1, averaging 171 μg m^?2 h^?1 (±SD 85) overall. The measured N₂O‐N fluxes equated to an EF5‐r of only 6.6% of that calculated using the IPCC methodology, and this itself was considered to be an overestimate because of the degassing of antecedent dissolved N₂O present in the groundwater that fed the river.     

Controlled Oxygen Redox for Excellent Power Capability in Layered Sodium‐Based Compounds

A high‐rate of oxygen redox assisted by cobalt in layered sodium‐based compounds is achieved. The rationally designed Na_0.6[Mg_0.2Mn_0.6Co_0.2]O₂ exhibits outstanding electrode performance, delivering a discharge capacity of 214 mAh g^?1 (26 mA g^?1) with capacity retention of 87% after 100 cycles. High rate performance is also achieved at 7C (1.82 A g^?1) with a capacity of 107 mAh g^?1. Surprisingly, the Na_0.6[Mg_0.2Mn_0.6Co_0.2]O₂ compound is able to deliver capacity for 1000 cycles at 5C (at 1.3 A g^?1), retaining 72% of its initial capacity of 108 mAh g^?1. X‐ray absorption spectroscopy analysis of the O K‐edge indicates the oxygen‐redox species (O^2?/1?) is active during cycling. First‐principles calculations show that the addition of Co reduces the bandgap energy from ≈2.65 to ≈0.61 eV and that overlapping of the Co 3d and O 2p orbitals facilitates facile electron transfer, enabling the long‐term reversibility of the oxygen redox, even at high rates. To the best of the authors' knowledge, this is the first report on high‐rate oxygen redox in sodium‐based cathode materials, and it is believed that the findings will open a new pathway for the use of oxygen‐redox‐based materials for sodium‐ion batteries.     

3D Hierarchical Core–Shell Nanostructured Arrays on Carbon Fibers as Catalysts for Direct Urea Fuel Cells

Bifunctional cobalt oxide (Co₃O₄) nanowire catalysts grown on carbon cloth (CC) fibers and their modification with nickel oxide (NiO) and manganese dioxide (MnO₂) to produce core–shell nanoarchitectures are explored as catalysts for urea oxidation reaction and oxygen reduction reaction in direct urea fuel cells (DUFC). Based on a systematic electrochemical characterization of the catalyst, the as‐developed core–shell nanoarchitectures are optimized toward DUFC performance. Under alkaline conditions with an anion exchange membrane, the DUFC with a cell configuration of Co₃O₄@NiO(1:2)/CC(a|c)Co₃O₄@MnO₂(1:2)/CC exhibits a maximum power density of 33.8 mW cm^?2 with excellent durability for 120 h without any performance loss. Furthermore, the DUFC exhibits a maximum power density of 23.2 mW cm^?2 with human urine as a fuel. These findings offer an approach to convert human waste into treasure.     

Hierarchical Zn–Co–S Nanowires as Advanced Electrodes for All Solid State Asymmetric Supercapacitors

A facile two‐step strategy is developed to design the large‐scale synthesis of hierarchical, unique porous architecture of ternary metal hydroxide nanowires grown on porous 3D Ni foam and subsequent effective sulfurization. The hierarchical Zn–Co–S nanowires (NWs) arrays are directly employed as an electrode for supercapacitors application. The as‐synthesized Zn–Co–S NWs deliver an ultrahigh areal capacity of 0.9 mA h cm^?2 (specific capacity of 366.7 mA h g^?1) at a current density of 3 mA cm^?2, with an exceptional rate capability (≈227.6 mA h g^?1 at a very high current density of 40 mA cm^?2) and outstanding cycling stability (≈93.2% of capacity retention after 10 000 cycles). Most significantly, the assembled Zn–Co–S NWs//Fe₂O₃@reduced graphene oxide asymmetric supercapacitors with a wide operating potential window of ≈1.6 V yield an ultrahigh volumetric capacity of ≈1.98 mA h cm^?3 at a current density of 3 mA cm^?2, excellent energy density of ≈81.6 W h kg^?1 at a power density of ≈559.2 W kg^?1, and exceptional cycling performance (≈92.1% of capacity retention after 10 000 cycles). This general strategy provides an alternative to design the other ternary metal sulfides, making it facile, free‐standing, binder‐free, and cost‐effective ternary metal sulfide‐based electrodes for large‐scale applications in modern electronics.     

Hierarchical Porous Carbonized Co3O4 Inverse Opals via Combined Block Copolymer and Colloid Templating as Bifunctional Electrocatalysts in Li–O2 Battery

Hierarchically organized porous carbonized‐Co₃O₄ inverse opal nanostructures (C‐Co₃O₄ IO) are synthesized via complementary colloid and block copolymer self‐assembly, where the triblock copolymer Pluronic P123 acts as the template and the carbon source. These highly ordered porous inverse opal nanostructures with high surface area display synergistic properties of high energy density and promising bifunctional electrocatalytic activity toward both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). It is found that the as‐made C‐Co₃O₄ IO/Ketjen Black (KB) composite exhibits remarkably enhanced electrochemical performance, such as increased specific capacity (increase from 3591 to 6959 mA h g^?1), lower charge overpotential (by 284.4 mV), lower discharge overpotential (by 19.0 mV), and enhanced cyclability (about nine times higher than KB in charge cyclability) in Li–O₂ battery. An overall agreement is found with both C‐Co₃O₄ IO/KB and Co₃O₄ IO/KB in ORR and OER half‐cell tests using a rotating disk electrode. This enhanced catalytic performance is attributed to the porous structure with highly dispersed carbon moiety intact with the host Co₃O₄ catalyst.     

The onset of photosynthetic acclimation to elevated CO2 partial pressure in field-grown Pinus radiata D. Don. after 4 years

The effects of CO₂ enrichment on photosynthesis and ribulose‐1,5‐bisphosphate carboxylase/oxygenase (rubisco) were studied in current year and 1‐year‐old needles of the same branch of field‐grown Pinus radiata D. Don trees. All measurements were made in the fourth year of growth in large, open‐top chambers continuously maintained at ambient (36 Pa) or elevated (65 Pa) CO₂ partial pressures. Photosynthetic rates of the 1‐year‐old needles made at the growth CO₂ partial pressure averaged 10·5 ± 0·5 μmol m^?2 s^?1 in the 36 Pa grown trees and 11·8 ± 0·4 μmol m^?2 s^?1 in the 65 Pa grown trees, and were not significantly different from each other. The photosynthetic capacity of 1‐year‐old needles was reduced by 25% from 23·0 ± 1·8 μmol m^?2 s^?1 in the 36 Pa CO₂ grown trees to 17·3 ± 0·7 μmol m^?2 s^?1 in the 65 Pa grown trees. Growth in elevated CO₂ also resulted in a 25% reduction in V_cmax (maximum carboxylation rate), a 23% reduction in J_max (RuBP regeneration capacity mediated by maximum electron transport rate) and a 30% reduction in Rubisco activity and content. Total non‐structural carbohydrates (TNC) as a fraction of total dry mass increased from 12·8 ± 0·4% in 1‐year‐old needles from the 36 Pa grown trees to 14·2 ± 0·7% in 1‐year‐old needles from the 65 Pa grown trees and leaf nitrogen content decreased from 1·30 ± 0·02 to 1·09 ± 0·10 g m^?2. The current‐year needles were not of sufficient size for gas exchange measurements, but none of the biochemical parameters measured (Rubisco, leaf chlorophyll, TNC and N), were effected by growth in elevated CO₂. These results demonstrate that photosynthetic acclimation, which was not found in the first 2 years of this experiment, can develop over time in field‐grown trees and may be regulated by source‐sink balance, sugar feedback mechanisms and nitrogen allocation.