Domains of BclA, the major surface glycoprotein of the B. cereus exosporium: glycosylation patterns and role in spore surface properties

The role of the BclA domains of B. cereus ATCC 14579 was investigated in order to understand the phenomena involved in the interfacial processes occurring between spores and inert surfaces. This was done by (i) creating deletions in the collagen-like region (CLR) and the C-terminal domain (CTD) of BclA, (ii) building BclA proteins with various lengths in the CLR and (iii) modifying the hydrophobic upper surface in the CTD. First, it was demonstrated that the CLR was substituted by three residues already reported in the CLR of B. anthracis, viz. rhamnose, 3-O-methyl-rhamnose, and GalNH(2) residues, while the CTD was also substituted by two additional glycosyl residues, viz. 2-O-methyl-rhamnose and 2,4-O-methyl-rhamnose. Regarding the properties of the spores, both CLR and CTD contributed to the adhesion of the spores, which was estimated by measuring the resistance to detachment of spores adhered to stainless steel plates). CLR and CTD also impacted the hydrophobic character and isoelectric point of the spores. It was then shown that the resistance to detachment of the spores was not affected by the physicochemical properties, but by the CLR length and the presence of hydrophobic amino acids on the CTD.     

Genes of Bacillus cereus and Bacillus anthracis encoding proteins of the exosporium

The exosporium is the outermost layer of spores of Bacillus cereus and its close relatives Bacillus anthracis and Bacillus thuringiensis. For these pathogens, it represents the surface layer that makes initial contact with the host. To date, only the BclA glycoprotein has been described as a component of the exosporium; this paper defines 10 more tightly associated proteins from the exosporium of B. cereus ATCC 10876, identified by N-terminal sequencing of proteins from purified, washed exosporium. Likely coding sequences were identified from the incomplete genome sequence of B. anthracis or B. cereus ATCC 14579, and the precise corresponding sequence from B. cereus ATCC 10876 was defined by PCR and sequencing. Eight genes encode likely structural components (exsB, exsC, exsD, exsE, exsF, exsG, exsJ, and cotE). Several proteins of the exosporium are related to morphogenetic and outer spore coat proteins of B. subtilis, but most do not have homologues in B. subtilis. ExsE is processed from a larger precursor, and the CotE homologue appears to have been C-terminally truncated. ExsJ contains a domain of GXX collagen-like repeats, like the BclA exosporium protein of B. anthracis. Although most of the exosporium genes are scattered on the genome, bclA and exsF are clustered in a region flanking the rhamnose biosynthesis operon; rhamnose is part of the sugar moiety of spore glycoproteins. Two enzymes, alanine racemase and nucleoside hydrolase, are tightly adsorbed to the exosporium layer; they could metabolize small molecule germinants and may reduce the sensitivity of spores to these, limiting premature germination.     

Domains of BclA,the major surface glycoprotein of the B. cereus exosporium: glycosylation patterns and role in spore surface properties

The role of the BclA domains of B. cereus ATCC 14579 was investigated in order to understand the phenomena involved in the interfacial processes occurring between spores and inert surfaces. This was done by (i) creating deletions in the collagen-like region (CLR) and the C-terminal domain (CTD) of BclA, (ii) building BclA proteins with various lengths in the CLR and (iii) modifying the hydrophobic upper surface in the CTD. First, it was demonstrated that the CLR was substituted by three residues already reported in the CLR of B. anthracis, viz. rhamnose, 3-O-methyl-rhamnose, and GalNH₂ residues, while the CTD was also substituted by two additional glycosyl residues, viz. 2-O-methyl-rhamnose and 2,4-O-methyl-rhamnose. Regarding the properties of the spores, both CLR and CTD contributed to the adhesion of the spores, which was estimated by measuring the resistance to detachment of spores adhered to stainless steel plates). CLR and CTD also impacted the hydrophobic character and isoelectric point of the spores. It was then shown that the resistance to detachment of the spores was not affected by the physicochemical properties, but by the CLR length and the presence of hydrophobic amino acids on the CTD.     

Targeting of the BclA and BclB proteins to the Bacillus anthracis spore surface

The exosporium is the outermost layer of the Bacillus anthracis spore. The predominant protein on the exosporium surface is BclA, a collagen-like glycoprotein. BclA is incorporated on the spore surface late in the B. anthracis sporulation pathway. A second collagen-like protein, BclB, has been shown to be surface-exposed on B. anthracis spores. We have identified sequences near the N-terminus of the BclA and BclB glycoproteins responsible for the incorporation of these proteins into the exosporium layer of the spore and used these targeting domains to incorporate reporter fluorescent proteins onto the spore surface. The BclA and BclB proteins are expressed in the mother cell cytoplasm and become spore-associated in a two-step process involving first association of the protein with the spore surface followed by attachment of the protein in a process that involves a proteolytic cleavage event. Protein domains associated with each of these events have been identified. This novel targeting system can be exploited to incorporate foreign proteins into the exosporium of inactivated, spores resulting in the surface display of recombinant immunogens for use as a potential vaccine delivery system.     

The ExsA protein of Bacillus cereus is required for assembly of coat and exosporium onto the spore surface

The outermost layer of spores of the Bacillus cereus family is a loose structure known as the exosporium. Spores of a library of Tn917-LTV1 transposon insertion mutants of B. cereus ATCC 10876 were partitioned into hexadecane; a less hydrophobic mutant that was isolated contained an insertion in the exsA promoter region. ExsA is the equivalent of SafA (YrbA) of Bacillus subtilis, which is also implicated in spore coat assembly; the gene organizations around both are identical, and both proteins contain a very conserved N-terminal cortex-binding domain of ca. 50 residues, although the rest of the sequence is much less conserved. In particular, unlike SafA, the ExsA protein contains multiple tandem oligopeptide repeats and is therefore likely to have an extended structure. The exsA gene is expressed in the mother cell during sporulation. Spores of an exsA mutant are extremely permeable to lysozyme and are blocked in late stages of germination, which require coat-associated functions. Two mutants expressing differently truncated versions of ExsA were constructed, and they showed the same gross defects in the attachment of exosporium and spore coat layers. The protein profile of the residual exosporium harvested from spores of the three mutants--two expressing truncated proteins and the mutant with the original transposon insertion in the promoter region--showed some differences from the wild type and from each other, but the major exosporium glycoproteins were retained. The exsA gene is extremely important for the normal assembly and anchoring of both the spore coat and exosporium layers in spores of B. cereus.     

Air-liquid interface biofilms of Bacillus cereus: formation, sporulation, and dispersion

Biofilm formation by Bacillus cereus was assessed using 56 strains of B. cereus, including the two sequenced strains, ATCC 14579 and ATCC 10987. Biofilm production in microtiter plates was found to be strongly dependent on incubation time, temperature, and medium, as well as the strain used, with some strains showing biofilm formation within 24 h and subsequent dispersion within the next 24 h. A selection of strains was used for quantitative analysis of biofilm formation on stainless steel coupons. Thick biofilms of B. cereus developed at the air-liquid interface, while the amount of biofilm formed was much lower in submerged systems. This suggests that B. cereus biofilms may develop particularly in industrial storage and piping systems that are partly filled during operation or where residual liquid has remained after a production cycle. Moreover, depending on the strain and culture conditions, spores constituted up to 90% of the total biofilm counts. This indicates that B. cereus biofilms can act as a nidus for spore formation and subsequently can release their spores into food production environments.     

The BclB glycoprotein of Bacillus anthracis is involved in exosporium integrity

Anthrax is a highly fatal disease caused by the gram-positive, endospore-forming, rod-shaped bacterium Bacillus anthracis. Spores, rather than vegetative bacterial cells, are the source of anthrax infections. Spores of B. anthracis are enclosed by a prominent loose-fitting structure called the exosporium. The exosporium is composed of a basal layer and an external hair-like nap. Filaments of the hair-like nap are made up largely of a single collagen-like glycoprotein called BclA. A second glycoprotein, BclB, has been identified in the exosporium layer. The specific location of this glycoprotein within the exosporium layer and its role in the biology of the spore are unknown. We created a mutant strain of B. anthracis DeltaSterne that carries a deletion of the bclB gene. The mutant was found to possess structural defects in the exosporium layer of the spore (visualized by electron microscopy, immunofluorescence, and flow cytometry) resulting in an exosporium that is more fragile than that of a wild-type spore and is easily lost. Immunofluorescence studies also indicated that the mutant strain produced spores with increased levels of the BclA glycoprotein accessible to the antibodies on the surface. The resistance properties of the mutant spores were unchanged from those of the wild-type spores. A bclB mutation did not affect spore germination or kinetics of spore survival within macrophages. BclB plays a key role in the formation and maintenance of the exosporium structure in B. anthracis.     

ExsY and CotY are required for the correct assembly of the exosporium and spore coat of Bacillus cereus

The exosporium-defective phenotype of a transposon insertion mutant of Bacillus cereus implicated ExsY, a homologue of B. subtilis cysteine-rich spore coat proteins CotY and CotZ, in assembly of an intact exosporium. Single and double mutants of B. cereus lacking ExsY and its paralogue, CotY, were constructed. The exsY mutant spores are not surrounded by an intact exosporium, though they often carry attached exosporium fragments. In contrast, the cotY mutant spores have an intact exosporium, although its overall shape is altered. The single mutants show altered, but different, spore coat properties. The exsY mutant spore coat is permeable to lysozyme, whereas the cotY mutant spores are less resistant to several organic solvents than is the case for the wild type. The exsY cotY double-mutant spores lack exosporium and have very thin coats that are permeable to lysozyme and are sensitive to chloroform, toluene, and phenol. These spore coat as well as exosporium defects suggest that ExsY and CotY are important to correct formation of both the exosporium and the spore coat in B. cereus. Both ExsY and CotY proteins were detected in Western blots of purified wild-type exosporium, in complexes of high molecular weight, and as monomers. Both exsY and cotY genes are expressed at late stages of sporulation.     

Contribution of ExsFA and ExsFB proteins to the localization of BclA on the spore surface and to the stability of the bacillus anthracis exosporium

Spores of Bacillus anthracis, the etiological agent of anthrax, and the closely related species Bacillus cereus and Bacillus thuringiensis, possess an exosporium, which is the outermost structure surrounding the mature spore. It consists of a paracrystalline basal layer and a hair-like outer layer. To date, the structural contribution of only one exosporium component, the collagen-like glycoprotein BclA, has been described. It is the structural component of the hair-like filaments. Here, we describe two other proteins, ExsFA and ExsFB, which are probably organized in multimeric complexes with other exosporium components, including BclA. Single and double exsF deletion mutants were constructed and analyzed. We found that inactivation of exsF genes affects the BclA content of spores. BclA is produced by all mutants. However, it is partially and totally released after mother cell lysis of the DeltaexsFA and DeltaexsFA DeltaexsFB mutant strains, respectively. Electron microscopy revealed that the exsF mutant spores have defective exosporia. The DeltaexsFA and DeltaexsFA DeltaexsFB spore surfaces are partially and totally devoid of filaments, respectively. Moreover, for all mutants, the crystalline basal layer appeared unstable. This instability revealed the presence of two distinct crystalline arrays that are sloughed off from the spore surface. These results indicate that ExsF proteins are required for the proper localization of BclA on the spore surface and for the stability of the exosporium crystalline layers.     

The ExsY protein is required for complete formation of the exosporium of Bacillus anthracis

The outermost layer of the Bacillus anthracis spore is the exosporium, which is composed of a paracrystalline basal layer and an external hair-like nap. The filaments of the nap are formed by a collagen-like glycoprotein called BclA, while the basal layer contains several different proteins. One of the putative basal layer proteins is ExsY. In this study, we constructed a DeltaexsY mutant of B. anthracis, which is devoid of ExsY, and examined the assembly of the exosporium on spores produced by this strain. Our results show that exosporium assembly on DeltaexsY spores is aberrant, with assembly arrested after the formation of a cap-like fragment that covers one end of the forespore-always the end near the middle of the mother cell. The cap contains a normal hair-like nap but an irregular basal layer. The cap is retained on spores prepared on solid medium, even after spore purification, but it is lost from spores prepared in liquid medium. Microscopic inspection of DeltaexsY spores prepared on solid medium revealed a fragile sac-like sublayer of the exosporium basal layer, to which caps were attached. Examination of purified DeltaexsY spores devoid of exosporium showed that they lacked detectable levels of BclA and the basal layer proteins BxpB, BxpC, CotY, and inosine-uridine-preferring nucleoside hydrolase; however, these spores retained half the amount of alanine racemase presumed to be associated with the exosporium of wild-type spores. The DeltaexsY mutation did not affect spore production and germination efficiencies or spore resistance but did influence the course of spore outgrowth.     

Involvement of alanine racemase in germination of Bacillus cereus spores lacking an intact exosporium

The l-alanine mediated germination of food isolated Bacillus cereus DSA 1 spores, which lacked an intact exosporium, increased in the presence of d-cycloserine (DCS), which is an alanine racemase (Alr) inhibitor, reflecting the activity of the Alr enzyme, capable of converting l-alanine to the germination inhibitor d-alanine. Proteomic analysis of the alkaline extracts of the spore proteins, which include exosporium and coat proteins, confirmed that Alr was present in the B. cereus DSA 1 spores and matched to that encoded by B. cereus ATCC 14579, whose spore germination was strongly affected by the block of conversion of l- to d-alanine. Unlike ATCC 14579 spores, l-alanine germination of B. cereus DSA 1 spores was not affected by the preincubation with DCS, suggesting a lack of restriction in the reactant accessibility.     

YwdL in Bacillus cereus: its role in germination and exosporium structure

In members of the Bacillus cereus group the outermost layer of the spore is the exosporium, which interacts with hosts and the environment. Efforts have been made to identify proteins of the exosporium but only a few have so far been characterised and their role in determining spore architecture and spore function is still poorly understood. We have characterised the exosporium protein, YwdL. ΔywdL spores have a more fragile exosporium, subject to damage on repeated freeze-thawing, although there is no evidence of altered resistance properties, and coats appear intact. Immunogold labelling and Western blotting with anti-YwdL antibodies identified YwdL to be located exclusively on the inner surface of the exosporium of B. cereus and B. thuringiensis. We conclude that YwdL is important for formation of a robust exosporium but is not required to maintain the crystalline assembly within the basal layer or for attachment of the hairy nap structure. ΔywdL spores are unable to germinate in response to CaDPA, and have altered germination properties, a phenotype that confirms the expected defect in localization of the cortex lytic enzyme CwlJ in the coat.     

Sporulation Temperature Reveals a Requirement for CotE in the Assembly of both the Coat and Exosporium Layers of Bacillus cereus Spores

The Bacillus cereus spore surface layers consist of a coat surrounded by an exosporium. We investigated the interplay between the sporulation temperature and the CotE morphogenetic protein in the assembly of the surface layers of B. cereus ATCC 14579 spores and on the resulting spore properties. The cotE deletion affects the coat and exosporium composition of the spores formed both at the suboptimal temperature of 20°C and at the optimal growth temperature of 37°C. Transmission electron microscopy revealed that ΔcotE spores had a fragmented and detached exosporium when formed at 37°C. However, when produced at 20°C, ΔcotE spores showed defects in both coat and exosporium attachment and were susceptible to lysozyme and mutanolysin. Thus, CotE has a role in the assembly of both the coat and exosporium, which is more important during sporulation at 20°C. CotE was more represented in extracts from spores formed at 20°C than at 37°C, suggesting that increased synthesis of the protein is required to maintain proper assembly of spore surface layers at the former temperature. ΔcotE spores formed at either sporulation temperature were impaired in inosine-triggered germination and resistance to UV-C and H₂O₂ and were less hydrophobic than wild-type (WT) spores but had a higher resistance to wet heat. While underscoring the role of CotE in the assembly of B. cereus spore surface layers, our study also suggests a contribution of the protein to functional properties of additional spore structures. Moreover, it also suggests a complex relationship between the function of a spore morphogenetic protein and environmental factors such as the temperature during spore formation.     

Assembly of the BclB glycoprotein into the exosporium and evidence for its role in the formation of the exosporium ‘cap’ structure in Bacillus anthracis

The outermost layer of the Bacillus anthracis spore consists of an exosporium comprised of an outer hair‐like nap layer and an internal basal layer. A major component of the hair‐like nap is the glycosylated collagen‐like protein BclA. A second collagen‐like protein, BclB, is also present in the exosporium. BclB possesses an N‐terminal sequence that targets it to the exosporium and is similar in sequence to a cognate targeting region in BclA. BclB lacks, however, sequence similarity to the region of BclA thought to mediate attachment to the basal layer via covalent interactions with the basal layer protein BxpB. Here we demonstrate that BxpB is critical for correct localization of BclB during spore formation and that the N‐terminal domains of the BclA and BclB proteins compete for BxpB‐controlled assembly sites. We found that BclB is located principally in a region of the exosporium that excludes a short arc on one side of the exosporium (the so‐called bottle‐cap region). We also found that in bclB mutant spores, the distribution of exosporium proteins CotY and BxpB is altered, suggesting that BclB has roles in exosporium assembly. In bclB mutant spores, the distance between the exosporium and the coat, the interspace, is reduced.     

A collagen-like surface glycoprotein is a structural component of the Bacillus anthracis exosporium

Bacillus anthracis, the aetiological agent of anthrax, is a Gram-positive spore-forming bacterium. The exosporium is the outermost integument surrounding the mature spore. Here, we describe the purification and the characterization of an immunodominant protein of the spore surface. This protein was abundant, glycosylated and part of the exosporium. The amino-terminal sequence was determined and the corresponding gene was identified. It encodes a protein of 382 amino acid residues, the central part of which contains a region of GXX motifs presenting similarity to mammalian collagen proteins. Thus, this collagen-like surface protein was named BclA (for Bacillus collagen-like protein of anthracis). BclA was absent from vegetative cells; it was detected only in spores and sporulating cells. A potential promoter, dependent on the sigma factor sigma(K), which is required for a variety of events late in sporulation, was found upstream from the bclA gene. A bclA deletion mutant was constructed and analysed. Electron microscopy studies showed that BclA is a structural component of the filaments covering the outer layer of the exosporium.     

The co-dependence of BxpB/ExsFA and BclA for proper incorporation into the exosporium of Bacillus anthracis

The outermost layer of the Bacillus anthracis spore consists of an exosporium comprised of two distinct layers, an outer hair-like nap layer and an internal basal layer. The hair-like nap is primarily comprised of the glycosylated collagen-like protein BclA. BclA is found in a trimeric form in close association with many other exosporium proteins in high-molecular weight complexes. We previously had characterized an N-terminal sequence of BclA that is sufficient for incorporation into the exosporium. Here we utilized site-directed mutagenesis to identify BclA residues critical to two steps in this process, positioning of the protein at the site of the developing exosporium basal layer and stable incorporation which includes a proteolytic cleavage of BclA after residue 19. The BxpB (ExsFA) protein is known to be important for proper incorporation of BclA onto the exosporium. BxpB and BclA were found to be expressed at the same time in sporulating cells of B. anthracis and immediately colocalize to high-molecular weight complexes. The BxpB protein was found to be in close proximity to the BclA NTD. BxpB and BclA are co-dependent for exosporium incorporation, with the BclA NTD being sufficient to deliver BxpB to the exosporium.     

Construction, crystal structure and application of a recombinant protein that lacks the collagen-like region of BclA from Bacillus anthracis spores

Spores of Bacillus anthracis, the causative agent of anthrax, are enclosed by an exosporium, which consists of a basal layer surrounded by a nap of hair-like filaments. The major structural component of the filaments is called BclA, which comprises a central collagen-like region (CLR) and a globular C-terminal domain. Here, the entire CLR coding sequence of BclA was removed, and the resulting protein (tBclA) produced in Escherichia coli. The crystallographic structure of tBclA was determined to 1.35 A resolution, and consists of an all-beta structure with a TNF-like jelly fold topology (12 beta-strands which form 2 beta-sheets of five strands each) consistent with previous studies on wild-type BclA. These globular domains are tightly packed into trimeric structures (surface shape complementarity; S (c) = 0.83), demonstrating that formation of the core structure of BclA is independent of the anchoring collagen-like region. A polyclonal antibody raised against tBclA recognized B. anthracis spores directly, and showed little cross-reactivity (<10%) with the spores of the closely related species Bacillus cereus and Bacillus thuringiensis, when compared to two other polyclonal antibodies raised against B. anthracis spore extracts and inactivated spores. The tBclA protein was used to purify a pool of specific antibodies from bovine colostrum whey samples from cows inoculated with the Sterne strain anthrax vaccine, which also showed reactivity with B. anthracis spores. Together, these results demonstrate that tBclA provides a safer and more effective way to the production and purification of antibodies with high binding affinity for B. anthracis spores. Biotechnol. Bioeng. 2008;99: 774-782. (c) 2007 Wiley Periodicals, Inc.     

The structure of the major cell wall polysaccharide of Bacillus anthracis is species-specific

In this report we describe the structure of the polysaccharide released from Bacillus anthracis vegetative cell walls by aqueous hydrogen fluoride (HF). This HF-released polysaccharide (HF-PS) was isolated and structurally characterized from the Ames, Sterne, and Pasteur strains of B. anthracis. The HF-PSs were also isolated from the closely related Bacillus cereus ATCC 10987 strain, and from the B. cereus ATCC 14579 type strain and compared with those of B. anthracis. The structure of the B. anthracis HF-PS was determined by glycosyl composition and linkage analyses, matrix-assisted laser desorption-time of flight mass spectrometry, and one- and two-dimensional nuclear magnetic resonance spectroscopy. The HF-PSs from all of the B. anthracis isolates had an identical structure consisting of an amino sugar backbone of -->6)-alpha-GlcNAc-(1-->4)-beta-ManNAc-(1-->4)-beta-GlcNAc-(1-->, in which the alpha-GlcNAc residue is substituted with alpha-Gal and beta-Gal at O-3 and O-4, respectively, and the beta-GlcNAc substituted with alpha-Gal at O-3. There is some variability in the presence of two of these three Gal substitutions. Comparison with the HF-PSs from B. cereus ATCC 10987 and B. cereus ATCC 14579 showed that the B. anthracis structure was clearly different from each of these HF-PSs and, furthermore, that the B. cereus ATCC 10987 HF-PS structure was different from that of B. cereus ATCC 14579. The presence of a B. anthracis-specific polysaccharide structure in its vegetative cell wall is discussed with regard to its relationship to those of other Bacillus species.     

Surface hydrophobicity of spores of Bacillus spp

The surface hydrophobicity of 12 strains of Bacillus spp. was examined in a hexadecane-aqueous partition system. Mature and germinated spores of Bacillus megaterium QM B1551 transferred to the hexadecane layer, while vegetative and sporulating cells did not. Wild-type spores were more hydrophobic than spores of an exosporium-deficient mutant of B. megaterium QM B1551, although the mutant spores were shown to be hydrophobic to some extent by using increased volumes of hexadecane. This result suggests that the exosporium is more hydrophobic than the spore coat and that the surface hydrophobicity of spores depends mainly on components of the exosporium. The surface hydrophobicity of spores of nine other species of Bacillus was also examined, and spores having an exosporium were more hydrophobic than those lacking an exosporium. Thus measurement of the hydrophobicity of spores by the hexadecane partition method may provide a simple and rapid preliminary means of determining the presence or absence of an exosporium.