Optimization of ultrasonic circulating extraction of polysaccharides from Asparagus officinalis using response surface methodology

Polysaccharides were extracted from Asparagus officinalis. A novel ultrasonic circulating extraction (UCE) technology was applied for the polysaccharide extraction. Three-factor-three-level Box-Behnken design was employed to optimize ultrasonic power, extraction time and the liquid-solid ratio to obtain a high polysaccharide yield. The optimal extraction conditions were as follows: ultrasonic power was 600 W, extraction time was 46 min, the liquid-solid ratio was 35 mL/g. Under these conditions, the experimental yield of polysaccharides was 3.134%, which was agreed closely to the predicted value. The average molecular weight of A. officinalis polysaccharide was about 6.18 × 10⁴ Da. The polysaccharides were composed of glucose, fucose, arabinose, galactose and rhamnose in a ratio of 2.18:1.86:1.50:0.98:1.53. Compared with hot water extraction (HWE), UCE showed time-saving, higher yield and no influence on the structure of asparagus polysaccharides. The results indicated that ultrasonic circulating extraction technology could be an effective and advisable technique for the large scale production of plant polysaccharides.     

The extraction process optimization and physicochemical properties of polysaccharides from the roots of Euphorbia fischeriana

Response surface methodology (RSM) was used to determine the optimum extraction conditions for polysaccharides (EFP) from the roots of Euphorbia fischeriana. A Box-Behnken design (BBD) with four independent variables was investigated, such as extraction temperature (°C), water/solid ratio, extraction number (n), and extraction time (h). The results indicated optimum extraction conditions were extraction temperature of 97 °C, water/solid ratio of 9:1, extraction number of 2 and extraction time of 2.4 h, respectively. Under these conditions, the experimental value was 24.6 ± 0.62, which was well in close agreement with value predicted by the model. The preliminary chemical analysis of EFP revealed the EFP contained 25.43% polysaccharides, 20.42% uronic acids, 2.54% sulfate radical and 23.41% proteins. And the neutral polysaccharides were mainly composed of glucose, arabinose, rhamnose, galactose, xylose, mannose in the ratio of 21:8:5:3:1:1.     

In vitro antioxidant and antitumor activities of polysaccharides extracted from Asparagus officinalis

Ultrasonic circulating extraction technology was applied for the polysaccharide extraction from Asparagus officinalis. The crude polysaccharides were deproteinized by Sevag method and three main polysaccharide fractions, AOP-4, AOP-6 and AOP-8 were obtained by fractional precipitation with gradient concentrations of ethanol (40%, 60% and 80%). The in vitro antitumor and antioxidant activities of the polysaccharide fractions were evaluated by MTT assay and free radical-scavenging assay, respectively. Deproteinized AOPs showed higher antioxidant and antitumor activities than crude AOP. AOP-4 with molecular weight 5.75 × 10⁴ Da showed significant function of scavenging hydroxyl radical. Three AOP fractions had significant antitumor activity against HeLa and BEL-7404 cells in a dose dependent manner. Furthermore, the inhibit activity of AOP-4 against HeLa cells was higher than those of other AOPs and the inhibition rate reached 83.96% at the concentration of 10 mg/mL. These results indicated that the AOP might be useful for developing natural safe antitumor drugs or health food.     

Dodonaea viscosa var. angustifolia leaf: New source of polysaccharide and its anti-oxidant activity

Ultrasonic technology was applied for polysaccharide extraction from the leaves of Dodonaea viscosa and response surface methodology (RSM) was used to optimize the effects of processing parameters on polysaccharide extraction yield. Three independent variables were extraction time (X₁), extraction temperature (X₂) and ultrasonic power (X₃), respectively. The statistical analysis indicated the independent variables (X₁, X₂, X₃), the quadratic terms (X₁₁ and X₃₃) and the interaction terms (X₁X₂, X₁X₃, X₂X₃) had significant effects on the yield of polysaccharides (P < 0.05). The optimal extraction conditions of D. viscosa leaf were determined as follows: extraction time 50.54 min, extraction temperature 85 °C and ultrasonic power 400 W. Under these conditions, the experimental yield of polysaccharides was 9.455 ± 0.24%, which was agreed closely with the predicted value (9.398%). The evaluation of anti-oxidant activity suggested that the polysaccharide exhibited significant protection against DPPH and hydroxyl radicals and could be explored as a nutraceutical agent.     

Isolation and structural characterization of a polysaccharide FCAP1 from the fruit of Cornus officinalis

A water-soluble polysaccharide, FCAP1, was isolated from an alkaline extract from the fruits of Cornus officinalis. Its molecular weight was 34.5 kDa. Monosaccharide composition analysis revealed that it was composed of fucose, arabinose, xylose, mannose, glucose, and galactose in a molar ratio of 0.29:0.19:1.74:1:3.30:1.10. On the basis of partial acid hydrolysis and methylation analysis, FCAP1 was shown to be a highly branched polysaccharide with a backbone of β-(1→4)-linked-glucose partially substituted at the O-6 position with xylopyranose residues. The branches were composed of (1→3)-linked-Ara, (1→4)-linked-Man, (1→4,6)-linked-Man, (1→4)-linked-Glc, and (1→2)-linked-Gal. Arabinose, fucose, and galactose were located at the terminal of the branches. The structure was further elucidated by a specific enzymatic degradation with an endo-β-(1→4)-glucanase and MALDI-TOF-MS analysis. Oligosaccharides generated from FCAP1 indicated that FCAP1 contained XXXG-type and XXG-type xyloglucan fragments.     

Extraction of polysaccharides and the antioxidant activity from the seeds of Plantago asiatica L

The extraction conditions of polysaccharides from Plantago asiatica L. seeds were investigated. Four parameters affecting the polysaccharides extraction, extraction times, water to sample, extraction temperature and single extraction time, were determined by orthogonal experiments. Under the optimized conditions, the polysaccharides yield of P. asiatica L. seeds was 2.467%. The antioxidant activities of the polysaccharides were investigated. The reducing power of the polysaccharides was dose dependent, and the reducing capacity of the polysaccharides was inferior to butylated hydroxytoluene, which is known to be a strong reducing agent. The scavenging rates of the polysaccharides on superoxide and 1,1-diphenyl-2-picrylhydrazyl radicals were79.7% and 81.4%, at polysaccharides concentration of 0.75 mg/mL, respectively, a scavenging rates approximately similar to that of 0.75 mg/mL ascorbic acid (83.5% and 85.1%, respectively). Furthermore, it exhibited a moderate concentration-dependent ABTS radical scavenging activity, ferrous ion chelating potency and H₂O₂ scavenging activity. The data obtained in the in vitro models clearly establish the antioxidant potency of the polysaccharides extracted from Semen Plantaginis.     

Extraction and chemical characterization of starch from S. lycocarpum fruits

In this study the pulp from Solanum lycocarpum fruits was used as raw material for extraction of starch, resulting in a yield of 51%. The starch granules were heterogeneous in size, presenting a conical appearance, very similar to a high-amylose cassava starch. The elemental analysis (CHNS) revealed 64.33% carbon, 7.16% hydrogen and 0.80% nitrogen. FT-IR spectroscopy showed characteristic peaks of polysaccharides and NMR analysis confirmed the presence of the α-anomer of d-glucose. The S. lycocarpum starch was characterized by high value of intrinsic viscosity (3515 mPa s) and estimated molecular weight around 645.69 kDa. Furthermore, this starch was classified as a B-type and high amylose content starch, presenting 34.66% of amylose and 38% crystallinity. Endothermic transition temperatures (T_o = 61.25 °C, T_p = 64.5 °C, T_c = 67.5 °C), gelatinization temperature (ΔT = 6.3 °C) ranges and enthalpy changes (ΔH = 13.21 J g⁻¹) were accessed by DCS analysis. These results make the S. lycocarpum fruit a very promising source of starch for biotechnological applications.     

Optimization of microwave-assisted FeCl3 pretreatment conditions of rice straw and utilization of Trichoderma viride and Bacillus pumilus for production of reducing sugars

In this study, Box-Behnken design (BBD) and response surface methodology (RSM) were used to optimize microwave-assisted FeCl₃ pretreatment conditions of rice straw with respect to FeCl₃ concentration, microwave intensity, irradiation time and substrate concentration. When rice straw was pretreated at the optimal conditions of FeCl₃ concentration, 0.14 mol/L; microwave intensity, 160 °C; irradiation time, 19 min; substrate concentration, 109 g/L; and inoculated with Trichoderma viride and Bacillus pumilus, the production of reducing sugars was 6.62 g/L. This yield was 2.9 times higher than that obtained with untreated rice straw. The microorganisms degraded 37.8% of pretreated rice straw after 72 h. The structural characteristic analyses suggest that microwave-assisted FeCl₃ pretreatment damaged the silicified waxy surface of rice straw, disrupted almost all the ether linkages between lignin and carbohydrates, and removed lignin.     

Optimization of culture conditions for production of yeast biomass using bamboo wastewater by response surface methodology

Response surface methodology (RSM) was applied to optimize culture conditions for the growth of Candida utilis with bamboo wastewater. A significant influence of initial pH, fermentation time and yeast extract on biomass of C. utilis was evaluated by Plackett–Burman design (PBD). These factors were further optimized using a central composite design (CCD) and RSM. A combination of initial pH 6.1, fermentation time 69 h and yeast extract 1.17 g/L was optimum for maximum biomass of C. utilis. A 1.7-fold enhancement of biomass of C. utilis was gained after optimization in shake-flask cultivation. The biomass of C. utilis reached 19.17 g/L in 3 L fermentor.     

Characterization and application of a detergent-stable alkaline α-amylase from Bacillus subtilis strain AS-S01a

A strain AS-S01a, capable of producing high-titer alkaline α-amylase, was isolated from a soil sample of Assam, India and was taxonomically identified as Bacillus subtilis strain AS-S01a. Optimized α-amylase yield by response surface method (RSM) was obtained as 799.0 U with a specific activity of 201.0 U/mg in a process control bioreactor. A 21.0 kDa alkaline α-amylase purified from this strain showed optimum activity at 55 °C and pH 9.0, and it produced high molecular weight oligosaccharides including small amount of glucose from starch as the end product. The K_m and V_max values for this enzyme towards starch were determined as 1.9 mg/ml and 198.21 μmol/min/mg, respectively. The purified α-amylase retained its activity in presence of oxidant, surfactants, EDTA and various commercial laundry detergents, thus advocating its suitability for various industrial applications.     

Structure and thermal stability of pyruvated carrageenans from the red alga Coccotylus truncatus

The composition, structure, and thermal stability of carrageenans from unattached Coccotylus truncatus (the Baltic Sea, Estonia) were investigated. The complex polysaccharide was characterized by ¹³C NMR and FTIR spectroscopy, ICP-OES and gel permeation chromatography methods. The main components of C. truncatus galactan are 3,6-anhydro-α-d-galactose-2-sulfate (30 ± 1.5%) and β-d-galactose-4-sulfate (45.3%), indicating a ι-carrageenan backbone. As the minor components, α-d-galactose-2,6-disulfate (12 ± 2%) from ν-carrageenan and 4′,6′-pyruvated β-d-galactopyranosyl residues (1.4%) from pyruvated α-carrageenan are found to be present, latter being responsible for the undersulfated nature of the galactan. The native polysaccharide with the average molecular weight of about 1500 kDa is highly susceptible to thermal degradation. The high-temperature treatment of this galactan gives products with 3,6-anhydro-α-d-galactose units predominantly at the reducing end. The carrageenan extraction from C. truncatus gives characteristically low yields (12-17%); weak gelling ability of the polysaccharides from this seaweed species (gel strength 30-40 g/cm²) does not depend significantly on extraction conditions.     

Modulatory role of Emblica officinalis fruit extract against arsenic induced oxidative stress in Swiss albino mice

Arsenic, an important human toxin, is naturally occurring in groundwater and its accumulation in plants and animals have assumed a menacing proportion in a large part of the world, particularly Asia. Epidemiological studies have shown a strong association between chronic arsenic exposure and various adverse health effects, including cardiovascular diseases, neurological defects and cancer of lung, skin, bladder, liver and kidney. The protective role of the fruits of Emblica officinalis (500 mg/kg b.wt.) was studied in adult Swiss albino mice against arsenic induced hepatopathy. Arsenic treated group (NaAsO₂, 4 mg/kg b.wt.) had a significant increase in serum transaminases and lipid peroxidation (LPO) content in liver, whereas significant decrease was recorded in hepatic superoxide dismutase (SOD), catalase (CAT), glutathione-S-transferase (GST) and serum alkaline phosphatase activity. Combined treatment of Emblica and arsenic (pre and post) declined the serum transaminases and LPO content in liver whereas significant increase was noticed in SOD, CAT, GST and serum alkaline phosphatase activities. Liver histopathology showed that Emblica fruit extract had reduced karyolysis, karyorrhexis, necrosis and cytoplasmic vacuolization induced by NaAsO₂ intoxication. Thus it can be concluded that pre- and post-supplementation of E. officinalis fruit extract significantly reduced arsenic induced oxidative stress in liver.     

High production of cold-tolerant chitinases on shrimp wastes in bench-top bioreactor by the Antarctic fungus Lecanicillium muscarium CCFEE 5003: Bioprocess optimization and characterization of two main enzymes

The Antarctic fungus Lecanicillium muscarium CCFEE-5003 was preliminary cultivated in shaken flasks to check its chitinase production on rough shrimp and crab wastes. Production on shrimp shells was much higher than that on crab shells (104.6 ± 9.3 and 48.6 ± 3.1 U/L, respectively). For possible industrial applications, bioprocess optimization was studied on shrimp shells in bioreactor using RSM to state best conditions of pH and substrate concentration. Optimization improved the production by 137% (243.6 ± 17.3). Two chitinolytic enzymes (CHI1 and CHI2) were purified and characterized. CHI1 (MW ca. 61 kDa) showed optima at pH 5.5 and 45 °C while CHI2 (MW ca. 25 kDa) optima were at pH 4.5 and 40 °C. Both enzymes maintained high activity levels at 5 °C and were inhibited by Fe⁺⁺, Hg⁺⁺ and Cu⁺⁺. CHI2 was strongly allosamidin-sensitive. Both proteins were N-acetyl-hexosaminidases (E.C. 3.2.1.52) but showed different roles in chitin hydrolysis: CHI1 could be defined as “chitobiase” while CHI2 revealed a main “eso-chitinase” activity.     

Anti-glycated activity prediction of polysaccharides from two guava fruits using artificial neural networks

High-efficiency ultrasonic treatment was used to extract the polysaccharides of Psidium guajava (PPG) and Psidium littorale (PPL). The aims of this study were to compare polysaccharide activities from these two guavas, as well as to investigate the relationship between ultrasonic conditions and anti-glycated activity. A mathematical model of anti-glycated activity was constructed with the artificial neural network (ANN) toolbox of MATLAB software. Response surface plots showed the correlation between ultrasonic conditions and bioactivity. The optimal ultrasonic conditions of PPL for the highest anti-glycated activity were predicted to be 256 W, 60 °C, and 12 min, and the predicted activity was 42.2%. The predicted highest anti-glycated activity of PPG was 27.2% under its optimal predicted ultrasonic condition. The experimental result showed that PPG and PPL possessed anti-glycated and antioxidant activities, and those of PPL were greater. The experimental data also indicated that ANN had good prediction and optimization capability.     

Effect of the environmental conditions on essential oil profile in two Dinaric Salvia species: S. brachyodon Vandas and S. officinalis L.

Two species belonging to the genus Salvia (Salvia brachyodon Vandas and Salvia officinalis L.) from Dalmatian region were studied for their essential oil composition, genome size and base composition. These species showed the same chromosome number (2n = 14), similar genome size (0.95 and 0.97 pg/2C) and base composition (38.52 and 38.55 GC%), respectively. This is the first estimation of DNA content and base composition for both species.     

Optimization of medium composition for butyric acid production by Clostridium thermobutyricum using response surface methodology

The optimal medium for butyric acid production by Clostridium thermobutyricum in a shake flask culture was studied using statistical experimental design and analysis. The optimal composition of the fermentation medium for maximum butyric acid yield, as determined on the basis of a three-level four-factor Box-Behnken design (BBD), was obtained by response surface methodology (RSM). The high correlation between the predicted and observed values indicated the validity of the model. A maximum butyric acid yield of 12.05 g/l was obtained at K₂HPO₄ 7.2 g/l, 34.9 g/l glucose, 20 g/l yeast extract, and 15 g/l acetate, which compared well to the predicated production of 12.13 g/l.     

In vitro antioxidant activities of sulfated polysaccharide fractions extracted from Corallina officinalis

Sulfated polysaccharides (F1, F2) from seaweed Corallina officinalis were isolated through anion-exchange column chromatography. Their chemical characteristics were determined by GC, HPLC, FT-IR and UV spectra. F1 and F2 contained only two monosaccharides, namely galactose and xylose. The antioxidant activities of F1, F2 and the de-sulfated polysaccharides (DF-1, DF-2) in vitro were investigated, including hydroxyl radicals scavenging effect, superoxide radical scavenging capacity, DPPH radical activity and reducing power. As expected, antioxidant assay showed that the two sulfated polysaccharide fractions (F1, F2) possessed considerable antioxidant properties and had more excellent abilities than de-sulfated polysaccharides (DF-1, DF-2).