Biosorption of reactive dye by waste biomass of Nostoc linckia

Potential of spent biomass of a cyanobacterium, Nostoc linckia HA 46, from a hydrogen bioreactor was studied for biosorption of a textile dye, reactive red 198. The waste biomass was immobilized in calcium alginate and used for biosorption of the dye from aqueous solution using response surface methodology (RSM). Kinetics of the dye in aqueous solution was studied in batch mode. Interactive effects of initial dye concentration (100-500 mg/L), pH (2-6) and temperature (25-45 °C) on dye removal were examined using Box-Behnken design. Maximum adsorption capacity of the immobilized biomass was 93.5 mg/g at pH 2.0, initial concentration of 100 mg/L and 35 °C temperature, when 94% of the dye was removed. Fourier transform infrared (FT-IR) studies revealed that biosorption was mainly mediated by functional groups like hydroxyl, amide, carboxylate, methyl and methylene groups present on the cell surface.     

Cross-linked succinyl chitosan as an adsorbent for the removal of Methylene Blue from aqueous solution

Removal of a basic dye (Methylene Blue) from aqueous solution was investigated using a cross-linked succinyl-chitosan (SCCS) as sorbent. The chemical structures of chitosan and its derivatives were testified by FT-IR. X-ray diffraction, DTG analysis and swelling measurements were conducted to clarify the characteristics of the chemically modified chitosan. The effect of process parameters, such as pH of the initial solution, and concentrations of dyes on the extent of Methylene Blue (MB) adsorption was investigated. The Langmuir isotherm model was used to fit the equilibrium experimental data, giving a maximum sorption capacity of 289.02 mg/g at 298 K. Kinetic studies showed that the kinetic data were well described by the pseudo-second-order kinetic model. Thermodynamic parameters such as enthalpy change (ΔH°), free energy change (ΔG°) and entropy change (ΔS°) were determined to be −25.32 kJ mol⁻¹, −6.76 kJ mol⁻¹ and −62.36 J mol⁻¹ K⁻¹, respectively, which leads to a conclusion that the adsorption process is spontaneous and exothermic.     

Adsorptive features of acid-treated olive stones for drin pesticides: Equilibrium,kinetic and thermodynamic modeling studies

The adsorption behavior of drin pesticides from aqueous solution onto acid treated olive stones (ATOS) was investigated using stir bar sorptive extraction and gas chromatography coupled with mass spectroscopy. The effects of sorbent particle size, adsorbent dose, contact time, concentration of pesticide solution and temperature on the adsorption processes were systematically studied in batch shaking sorption experiments. Maximum removal efficiency (94.8%) was reached for aldrin (0.5 mg L⁻¹) using the fraction 63–100 μm of ATOS (solid/liquid ratio: 1 g L⁻¹). Experimental data were modeled by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherms. The Freundlich isotherm model (R² = 0.98–0.99) fitted the equilibrium data better than the Langmuir and D–R isotherm models, with low sum of error values (SE = 1.4–9.2%). The mean adsorption free energy derived from the D–R isotherm model (R² = 0.95–0.99) showed that the adsorption of drin pesticides was taken place by weak physical forces, such as van der Waals forces and hydrogen bonding. The calculated thermodynamic parameters, ΔH, ΔS and ΔG prove that drin pesticides adsorption on ATOS was feasible, spontaneous and exothermic under examined conditions. The pseudo first order, pseudo second order kinetic and the intra-particle diffusion models were used to describe the kinetic data and rate constants were evaluated.     

Determination of thermal properties of composting bulking materials

Thermal properties of compost bulking materials affect temperature and biodegradation during the composting process. Well determined thermal properties of compost feedstocks will therefore contribute to practical thermodynamic approaches. Thermal conductivity, thermal diffusivity, and volumetric heat capacity of 12 compost bulking materials were determined in this study. Thermal properties were determined at varying bulk densities (1, 1.3, 1.7, 2.5, and 5 times uncompacted bulk density), particle sizes (ground and bulk), and water contents (0, 20, 50, 80% of water holding capacity and saturated condition). For the water content at 80% of water holding capacity, saw dust, soil compost blend, beef manure, and turkey litter showed the highest thermal conductivity (K) and volumetric heat capacity (C) (K: 0.12–0.81 W/m °C and C: 1.36–4.08 MJ/m³ °C). Silage showed medium values at the same water content (K: 0.09–0.47 W/m °C and C: 0.93–3.09 MJ/m³ °C). Wheat straw, oat straw, soybean straw, cornstalks, alfalfa hay, and wood shavings produced the lowest K and C values (K: 0.03–0.30 W/m °C and C: 0.26–3.45 MJ/m³ °C). Thermal conductivity and volumetric heat capacity showed a linear relationship with moisture content and bulk density, while thermal diffusivity showed a nonlinear relationship. Since the water, air, and solid materials have their own specific thermal property values, thermal properties of compost bulking materials vary with the rate of those three components by changing water content, bulk density, and particle size. The degree of saturation was used to represent the interaction between volumes of water, air, and solids under the various combinations of moisture content, bulk density, and particle size. The first order regression models developed in this paper represent the relationship between degree of saturation and volumetric heat capacity (r = 0.95–0.99) and thermal conductivity (r = 0.84–0.99) well. Improved knowledge of the thermal properties of compost bulking materials can contribute to improved thermodynamic modeling and heat management of composting processes.     

Chemical modification of chitosan by tetraethylenepentamine and adsorption study for anionic dye removal

To utilize the contribution of introduced amino groups to the adsorption of an anionic dye (eosin Y), a batch adsorption system was applied to study the adsorption of eosin Y from aqueous solution by tetraethylenepentamine (TEPA) modified chitosan (TEPA–CS). Experiments were carried out as a function of particle size, initial pH, agitation rate, adsorbent dosage, agitation period, temperature and initial concentration of eosin Y. The Langmuir and Freundlich models were used to fit the adsorption isotherms. From the values of correlation coefficients (R²), it was observed that the experimental data fit very well to the Langmuir model, giving a maximum sorption capacity of 292.4 mg/g at 298 K. Kinetic studies showed that the kinetic data were well described by the pseudo-second-order kinetic model. The thermodynamic study revealed negative value of enthalpy change (ΔH°) and free energy change (ΔG°), indicating spontaneous and endothermic nature of the adsorption of eosin Y on to TEPA–CS.     

Investigation on a host-guest inclusion system by β-cyclodextrin derivative and its analytical application

The host-guest inclusion system of ethyl substituted β-cyclodextrin (DE-β-CD) with mangiferin (MA) was investigated by fluorescence spectra in solution. The results showed that the MA was encapsulated in the DE-β-CD’s cavity to form a 2:1 stoichiometry host-guest inclusion complex (DE-β-CD/MA) and the inclusion constant (K = 3.04 × 10⁶ L²/mol²) was confirmed by the typical double reciprocal plots. Furthermore, several experimental conditions were optimized in order to obtain the maximum fluorescence signal. In addition, the thermodynamic parameters, Gibbs free energy (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) of DE-β-CD/MA were obtained by the Van’t Hoff equation. A spectrofluorimetric method for the determination of MA in solution in the presence of DE-β-CD was developed based on the remarkable enhancement of the fluorescence intensity of MA. The linear range was 2.00 × 10⁻⁸-7.00 × 10⁻⁶ mol/L and the detection limit was 4.05 × 10⁻⁹ mol/L. The proposed method was successfully applied to the analysis of MA in serum with the satisfactory result.     

Enhanced production and partial characterization of an extracellular polysaccharide from newly isolated Azotobacter sp. SSB81

A strain was selected by its highest extracellular polysaccharide (EPS) production ability compare to other isolates from the same rhizospheric soil. The selected strain was identified by 16S rDNA sequencing and designated as SSB81. Phylogenetic analysis of the gene sequence showed its close relatedness with Azotobacter vinelandii and Azotobacter salinestris. Maximum EPS (2.52 g l⁻¹) was recovered when the basal medium was supplemented with glucose (2.0%), riboflavin (1 mg l⁻¹) and casamino acid (0.2%). The EPS showed a stable viscosity level at acidic pH (3.0–6.5) and the pyrolysis temperature was found to be at 116.73 °C with an enthalpy (ΔH) of 1330.72 Jg⁻¹. MALDI TOF mass spectrometric result suggests that polymer contained Hex₅Pent₃ as oligomeric building subunit. SEM studies revealed that the polymer had a porous structure with small pore size distribution indicating the compactness of the polymer. This novel EPS may find possible application as a polymer for environmental bioremediation and biotechnological processes.     

Purification and characterisation of a bifunctional alginate lyase from novel Isoptericola halotolerans CGMCC 5336

A novel halophilic alginate-degrading microorganism was isolated from rotten seaweed and identified as Isoptericola halotolerans CGMCC5336. The lyase from the strain was purified to homogeneity by combining of ammonium sulfate fractionation and anion-exchange chromatography with a specific activity of 8409.19 U/ml and a recovery of 25.07%. This enzyme was a monomer with a molecular mass of approximately 28 kDa. The optimal temperature and pH were 50 °C and pH 7.0, respectively. The lyase maintained stability at neutral pH (7.0–8.0) and temperatures below 50 °C. Metal ions including Na⁺, Mg²⁺, Mn²⁺, and Ca²⁺ notably increased the activity of the enzyme. With sodium alginate as the substrate, the K_m and V_max were 0.26 mg/ml and 1.31 mg/ml min, respectively. The alginate lyase had substrate specificity for polyguluronate and polymannuronate units in alginate molecules, indicating its bifunctionality. These excellent characteristics demonstrated the potential applications in alginate oligosaccharides production with low polymerisation degrees.     

Extraction and chemical characterization of starch from S. lycocarpum fruits

In this study the pulp from Solanum lycocarpum fruits was used as raw material for extraction of starch, resulting in a yield of 51%. The starch granules were heterogeneous in size, presenting a conical appearance, very similar to a high-amylose cassava starch. The elemental analysis (CHNS) revealed 64.33% carbon, 7.16% hydrogen and 0.80% nitrogen. FT-IR spectroscopy showed characteristic peaks of polysaccharides and NMR analysis confirmed the presence of the α-anomer of d-glucose. The S. lycocarpum starch was characterized by high value of intrinsic viscosity (3515 mPa s) and estimated molecular weight around 645.69 kDa. Furthermore, this starch was classified as a B-type and high amylose content starch, presenting 34.66% of amylose and 38% crystallinity. Endothermic transition temperatures (T_o = 61.25 °C, T_p = 64.5 °C, T_c = 67.5 °C), gelatinization temperature (ΔT = 6.3 °C) ranges and enthalpy changes (ΔH = 13.21 J g⁻¹) were accessed by DCS analysis. These results make the S. lycocarpum fruit a very promising source of starch for biotechnological applications.     

Preservation at ultra-low temperature of in vitro cultured arbuscular mycorrhizal fungi via encapsulation–drying

At present, over 300 species of arbuscular mycorrhizal fungi (AMF) have been identified, most of which being stored in international collections. Their maintenance is mostly achieved in greenhouse via continuous culture on trap plants or in vitro in association with excised root organs. Both methods are work-intensive and for the former present the risk of unwanted contaminations. The in vitro root organ culture of AMF has become an alternative preventing contamination. Nevertheless, the risk for somaclonal variation during the sub-cultivation process cannot be excluded. A method for the long-term conservation that guarantees the stability of the biological material is thus highly demanded to preserve the microorganisms and their genetic stability. Here, 12 AMF isolates cultured in vitro in association with excised carrot roots were encapsulated in alginate beads and subsequently cryopreserved. Several protocols were tested taking into consideration culture age, alginate bead pre-drying, and rate of decrease in temperature. The viability of the AMF isolates was estimated by the percentage of potentially infective beads (%PIB) that measure the % of beads that contain at least one germinated propagule. Thermal behaviour of alginate beads was analysed by a differential thermal calorimeter before and after drying to estimate the frozen and unfrozen water during the cryopreservation process. It was shown that the spore damage was directly related to ice formation during cryopreservation. The encapsulation and culture age were also determinant parameters for the successful cryopreservation. Irrespective of the AMF isolate, the optimal procedure for cryopreservation comprised five steps: (1) the encapsulation of propagules (i.e. spores and mycorrhizal root pieces) isolated from 5 m old cultures, (2) the incubation overnight in trehalose (0.5 M), (3) the drying during 48 h at 27 °C, (4) the cryopreservation in the freezer at −130 °C following a two-step decrease in temperature: a fast decrease (∼12 °C min⁻¹) from room temperature (+20 °C) to −110 °C followed by a slow decrease in temperature (∼1 °C min⁻¹) from −110 °C to −130 °C, and (5) the direct thawing in a water bath (+35 °C). The % PIB was above 70 % for all the isolates and even above 95 % for 11 out of the 12 isolates after several months of storage at ultra-low temperature. All the isolates kept their capacity to associate to an excised carrot root in vitro and to reproduce the fungal life cycle with the production of several hundreds to thousands of spores after 2 m. This method opens the door for the long-term maintenance at ultra-low temperature of AMF isolates within international repositories.     

Synthesis of CarAlg/MMt nanocomposite hydrogels and adsorption of cationic crystal violet

CarAlg/MMt nanocomposite hydrogels composed of kappa-carrageenan (Car) and sodium alginate (Alg) biopolymers were synthesized by incorporation of sodium montmorillonite (Na-MMt) nanoclay. Acrylamide (AAm), methylenebisacrylamide (MBA), and ammonium persulfate (APS) were used as monomer, crosslinker, and initiator, respectively. The structure and morphology of nanocomposites were characterized by XRD, SEM, and TEM techniques. The XRD results showed exfoliated MMt nanoclay and exfoliation of MMt was confirmed by TEM graph. The resulting nanocomposites were evaluated to remove cationic crystal violet (CV) dye from water. According to data, the adsorption capacity of nanocomposites was enhanced as the clay content was increased. The experimental data were analyzed according to both Langmuir and Freundlich models and experimental maximum adsorption capacity was obtained 88.8 mg g⁻¹. By studying the effect of pH on the dye adsorption capacity of nanocomposites, it was revealed that the adsorption capacity of nanocomposites was enhanced at acidic pHs as the Na-MMt nanoclay and kappa-carrageenan components were increased.     

Seasonal acclimation in resting metabolism of the skink, Mabuya brevicollis (Reptilia: Scincidae) from southwestern Saudi Arabia

The resting metabolic rate (RMR) of seasonally-acclimated Mabuya brevicollis of various body masses was determined at 20, 25, 30, 35 and 40 °C, using open-flow respirometry. RMR (ml g⁻¹ h⁻¹) decreased with increasing mass at each temperature. RMRs increaProd. Type: FTPsed as temperature increased. The highest and lowest Q₁₀ values were obtained for the temperature ranges 20–25 °C and 30–35 °C for the summer-acclimated lizards. The exponent of mass “b” in the metabolism-body mass relation ranged from 0.41 to 0.61. b values were lower in the autumn and winter-acclimated lizards than in spring and summer-acclimated lizards. Seasonal acclimation effects were evident at all temperatures (20–40 °C) for M. brevicollis. Winter-acclimated skinks had the lowest metabolic rates at different temperatures. The pattern of acclimation exhibited by M. brevicollis may represent a useful adaptation for lizards inhabiting subtropical deserts to promote activity during their active seasons.     

Drin pesticides removal from aqueous solutions using acid-treated date stones

This work describes the potential applicability of chemically and thermally treated date stones for removing drin pesticides (aldrin, dieldrin and endrin) from aqueous solutions. The effect of several parameters, such as sorbent particle size, adsorbent dose, shaking speed, shaking time, concentration of pesticide solution and temperature, was evaluated by batch experiments. Pesticide determination was carried out using stir bar sorptive extraction and gas chromatography coupled with mass spectroscopy. Maximum removal efficiency (93%) was reached using 0.1 g of acid-treated date stones (ATDS) (63–100 μm) and 100 mL of aldrin (0.5 mg L⁻¹). The removal efficiency of drin pesticides decreased in the order of aldrin, dieldrin and endrin, and decreased as the temperature rose. Adsorption data were processed according to various kinetic models. Lagergren and Morris-Weber equations were applied to fit the kinetic results. The second order model was the most suitable on the whole, and intra-particle diffusion was found to be the rate-controlling the adsorption process. According to adsorption kinetic data, 3.5 h were considered as the equilibrium time for determining adsorption isotherms. Adsorption data were analyzed by the Langmuir, Freundlich and Dubinin–Radushkevich adsorption approaches. Experimental results showed that the Freundlich isotherm model best described the adsorption process. In addition, thermodynamic parameters such as ΔH, ΔS and ΔG were calculated. Negative values of ΔH and ΔG indicate the exothermic and spontaneous nature of pesticide adsorption on ATDS.     

Congo red adsorption from aqueous solutions by using chitosan hydrogel beads impregnated with nonionic or anionic surfactant

The adsorption performance of CS beads impregnated with triton X-100 (TX-100) as a nonionic surfactant and sodium dodecyl sulfate (SDS) as an anionic surfactant was investigated for the removal of anionic dye (congo red) from aqueous solution. While the adsorption capacity of CS/TX-100 beads was enhanced at all concentrations of TX-100 (0.005–0.1%), the increase in the concentration of SDS above 0.01% in the CS/SDS beads gradually reduced the adsorption capacity of the beads. Equilibrium adsorption isotherm data indicated a good fit to the Sips isotherm model and a heterogeneous adsorption process. The Sips maximum adsorption capacity in dry weight of the CS/TX-100 beads was 378.79 mg/g and 318.47 mg/g for the CS/SDS beads, higher than the 223.25 mg/g of the CS beads. Modification of CS beads by impregnation with nonionic surfactant, or even anionic surfactant, at low concentrations is a possible way to enhance adsorption of anionic dye.     

Influence of food colorant and initial COD concentration on the efficiencies of micro-aerobic sequencing batch reactor (micro-aerobic SBR) for casein recovery under non-sterile condition by Lactobacillus casei TISTR 1500

The acid biocoagulants produced from non-sterile lactic acid fermentation by Lactobacillus casei TISTR 1500 were used to settle colloidal protein, mainly casein, at the isoelectric point in dairy effluent prior to secondary treatment. High concentration of azo dye (Ponceau 4R) in the dairy wastewater and the stress of starvation decreased the efficiencies of the micro-aerobic SBR. Consequently, low casein recovery obtained and organic removal suffered a decline. The number of lactic acid bacteria (LAB) also declined from log 7.4 to log 5.30 in the system fed with 400 mg L⁻¹ of the dye containing wastewater. The recovery of the system, however, showed that 25,000 mg COD L⁻¹ influent with 200 mg L⁻¹ of the dye maintained the growth of LAB in the range of log 7.74–8.12, with lactic and acetic production (2597 and 197 mg L⁻¹) and 83% protein removal. The results in this study suggested that the inhibitory effects were compensated with high organic content feeding.     

Thermopreference,tolerance and metabolic rate of early stages juvenile Octopus maya acclimated to different temperatures

Thermopreference, tolerance and oxygen consumption rates of early juveniles Octopus maya (O. maya; weight range 0.38–0.78 g) were determined after acclimating the octopuses to temperatures (18, 22, 26, and 30 °C) for 20 days. The results indicated a direct relationship between preferred temperature (PT) and acclimated temperature, the PT was 23.4 °C. Critical Thermal Maxima, (CTMax; 31.8±1.2, 32.7±0.9, 34.8±1.4 and 36.5±1.0) and Critical Thermal Minima, (CTMin; 11.6±0.2, 12.8±0.6, 13.7±1.0, 19.00±0.9) increased significantly (P<0.05) with increasing acclimation temperatures. The endpoint for CTMax was ink release and for CTMin was tentacles curled, respectively. A thermal tolerance polygon over the range of 18–30 °C resulted in a calculated area of 210.0 °C². The oxygen consumption rate increased significantly α=0.05 with increasing acclimation temperatures between 18 and 30 °C. Maximum and minimum temperature quotients (Q₁₀) were observed between 26–30 °C and 22–26 °C as 3.03 and 1.71, respectively. These results suggest that O. maya has an increased capability for adapting to moderate temperatures, and suggest increased culture potential in subtropical regions southeast of México.     

Enhanced production of bioethanol and ultrastructural characteristics of reused Saccharomyces cerevisiae immobilized calcium alginate beads

Yeast immobilized on alginate beads produced a higher ethanol yield more rapidly than did free yeast cells under the same batch-fermentation conditions. The optimal fermentation conditions were 30 °C, pH 5.0, and 10% initial glucose concentration with 2% sodium alginate beads. The fermentation time using reused alginate beads was 10-14 h, whereas fresh beads took 24 h, and free cells took 36 h. All bead samples resulted in nearly a 100% ethanol yield, whereas the free cells resulted in an 88% yield. Transmission electron microscopy (TEM) showed that the shortened time and higher yield with the reused beads was due to a higher yeast population per bead as well as a higher porosity. The ultrastructure of calcium alginate beads and the alginate matrix structure known as the “egg-box” model were observed using TEM.     

Isomaltulose production from sucrose by Protaminobacter rubrum immobilized in calcium alginate

Different culture conditions for Protaminobacter rubrum and enzymatic reaction parameters were evaluated with the goal of improving isomaltulose production. P. rubrum was grown in a medium with 1% (w/v) cane molasses and 0.5% yeast extract and achieved a maximum cell yield Y_x/s of 0.295 g of cells/g sucrose and a specific growth rate (μ) of 0.192 h⁻¹. The immobilization of P. rubrum cells was carried out with calcium alginate, glutaraldehyde and polyethyleneimine. Stabile immobilized cell pellets were obtained and used 24 times in batch processes. Enzymatic conversion was carried out at different sucrose concentrations and in pH 6 medium with 70% (w/v) sucrose at 30 °C an isomaltulose yield of 89–94% (w/v) was obtained. The specific activity of the P. rubrum immobilized pellets in calcium alginate at 30 °C ranged from 1.6 to 4.0 g isomaltulose g⁻¹ pellet h⁻¹, respectively with 70% and 65% sucrose solution, while in lower sucrose concentration had higher specific activities presumably due to substrate inhibition of the isomaltulose synthase in higher sucrose concentrations.