Physico-Chemical Characterization of Watermelon Urease upon Immobilization in Alginate Beads

Watermelon (Citrullus vulgaris) urease was immobilized in 3.5% alginate leading to 72% immobilization. There was no leaching of the enzyme over a period of 15 days at 4°C. It continued to hydrolyse urea at a faster rate upto 90 min of incubation. The immobilized urease exhibited a shift of apparent pH optimum by one unit towards acidic side (from pH 8.0 to 7.0). The K_m was found to be 13.3 mM; 1.17 times higher than the soluble enzyme (11.4 mM). The beads were fairly stable upto 50°C and exhibited activity even at ?10°C. The enzyme was significantly activated by ME and it exhibited two peaks of activation; one at lower concentration and another at higher concentration. Time-dependent ureolysis in presence of ME progressed at a much elevated rate. Unlike soluble enzyme, which was inhibited at 200 mM urea, the immobilized enzyme was inhibited at 600 mM of urea and above, and about 47% activity was retained at 2000 mM urea. Moreover, the inhibition caused by high urea concentration was partially abolished by ME. The significance of the observations is discussed.     

Urease Immobilization on Arylamine Glass Beads and its Characterization

Jack bean urease has been immobilized on arylamine glass beads (200–400 mesh size, 75–100 Å pore size) and its properties compared with soluble enzyme. The binding of urease was 13.71 mg per gram beads. The K_m for soluble and immobilized urease for urea was 4.20 mM and 8.81 mM, respectively. V_max values of urease decreased from 200 to 43.48 μmol of ammonia formed per min per mg protein at 37°C on immobilization. Both pH and buffer ions influenced the activities of soluble as well as immobilized urease. Soluble urease exhibited pH optima at 5.5 and 8.0. However, immobilized urease showed one additional pH optimum at 6.5. In comparison to phosphate buffer, citrate buffer was inhibitory to urease activity. Immobilization of urease on arylamine glass beads resulted in improved thermal, storage and operational stability. Because of inertness of support and stability of immobilized urease, the preparation can find applications in ‘artificial kidney’ and urea estimation in biological fluids viz., blood, milk etc.     

Enzymatic detection of heavy metal ions in aqueous solution from vegetable wastes by immobilizing pumpkin (<Emphasis Type="Italic">Cucumis melo</Emphasis>) urease in calcium alginate beads

Enzyme urease is extracted from the discarded seeds of pumpkin. Urease was purified to apparent homogeneity (5.2 fold) by heat treatment at 48 ± 1°C and gel filtration through Sephadex G-200. Effect of model metal ions on the activity of the homogeneous enzyme preparation (sp. activity 353 U/mg protein, A₂₈₀/A₂₆₀ = 1.12) of soluble as well as immobilized enzyme was investigated. The soluble and immobilized urease has been used for the quantitative estimation of general water pollution with heavy metal ions like Hg²⁺, Cu²⁺, Cd²⁺, and Co²⁺. The measurements of the urease residual activity have been carried out in tris-acetate buffer after pre-incubation of model metal salt. The inhibition was found to be biphasic with an initial rapid loss of activity and remainder in slow phase of 10∼15 min. The immobilization was done in 3.5% alginate beads leading to 86% of entrapment. There was no leaching of the enzyme over a period of 15 days at 4°C. The beads were fairly stable up to 50°C and exhibited activity even at −10°C. The inhibition by these ions was non-competitive and irreversible, hence could not be restored by dialysis. Based on the values of inhibition constant Ki the heavy-metal ions were found to inhibit urease in the following order Hg²⁺ > Cu²⁺ > Cd²⁺ > Co²⁺.     

Production of high fructose syrup from <Emphasis Type="Italic">Asparagus</Emphasis> inulin using immobilized exoinulinase from <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> YS-1

Extracellular exoinulinase from Kluyveromyces marxianus YS-1, which hydrolyzes inulin into fructose, was immobilized on Duolite A568 after partial purification by ethanol precipitation and gel exclusion chromatography on Sephadex G-100. Optimum temperature of immobilized enzyme was 55 °C, which was 5 °C higher than the free enzyme and optimal pH was 5.5. Immobilized biocatalyst retained more than 90% of its original activity after incubation at 60 °C for 3 h, whereas in free form its activity was reduced to 10% under same conditions, showing a significant improvement in the thermal stability of the biocatalyst after immobilization. Apparent K _m values for inulin, raffinose and sucrose were found to be 3.75, 28.5 and 30.7 mM, respectively. Activation energy (E _a) of the immobilized biocatalyst was found to be 46.8 kJ/mol. Metal ions like Co²⁺ and Mn²⁺ enhanced the activity, whereas Hg²⁺ and Ag²⁺ were found to be potent inhibitors even at lower concentrations of 1 mM. Immobilized biocatalyst was effectively used in batch preparation of high fructose syrup from Asparagus racemosus raw inulin and pure inulin, which yielded 39.2 and 40.2 g/L of fructose in 4 h; it was 85.5 and 92.6% of total reducing sugars produced, respectively.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Effect of calcium on immobilization of rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) peroxidase for bioassays in sodium alginate and Agarose gel

The direct immobilization of soluble peroxidase isolated and partially purified from shoots of rice seedlings in calcium alginate beads and in calcium agarose gel was carried out. Peroxidase was assayed for guaiacol oxidation products in presence of hydrogen peroxide. The maximum specific activity and immobilization yield of the calcium agarose immobilized peroxidase reached 2,200 U mg⁻¹ protein (540 mU cm⁻³ gel) and 82%, respectively. In calcium alginate the maximum activity of peroxidase upon immobilization was 210 mU g⁻¹ bead with 46% yield. The optimal pH for agarose immobilized peroxidase was 7.0 which differed from the pH 6.0 for soluble peroxidase. The optimum temperature for the agarose immobilized peroxidase however was 30°C, which was similar to that of soluble peroxidase. The thermal stability of calcium agarose immobilized peroxidase significantly enhanced over a temperature range of 30∼60°C upon immobilization. The operational stability of peroxidase was examined with repeated hydrogen peroxide oxidation at varying time intervals. Based on 50% conversion of hydrogen peroxide and four times reuse of immobilized gel, the specific degradation of guaiacol for the agarose immobilized peroxidase increased three folds compared to that of soluble peroxidase. Nearly 165% increase in the enzyme protein binding to agarose in presence of calcium was noted. The results suggest that the presence of calcium, ions help in the immobilization process of peroxidase from rice shoots and mediates the direct binding of the enzyme to the agarose gel and that agarose seems to be a better immobilization matrix for peroxidase compared to sodium alginate.     

Immobilization/stabilization of acid urease on Eupergit® supports

The adsorption capacity and immobilization rate of two Eupergit® supports for acid urease was studied by varying the ionic strength and enzyme preparation concentration in the immobilizing solution at pH 7. Eupergit® C250 L yielded a series of derivatives with enzyme loadings (Y_P/B) ranging from 48 to 171 mg of bovine serum albumin equivalent (BSAE) per gram of dry support (ds). Use of drastic postimmobilization conditions at pH 9 for 3–9 days yielded a slight decrease (8–14%) in the initial activity of immobilized enzymes and a limited increase in the stabilization factor (1.1–1.5), as assessed by accelerated aging tests at 65°C. Further storage tests at 4°C in the wet state showed that the activity of several derivatives either stabilized or not was practically constant for as long as 547 days. Both free enzyme and immobilized acid urease derivatives exhibited a kinetic pattern of the Michaelis–Menten type. Using the Eadie–Hofstee diagram, the specific ammonia formation rate constant for free (k_cat) or immobilized (k′_cat) enzyme resulted to be little affected by immobilization (k_cat ≈ k′_cat ≈ 18.86 ± 0.34 IU/mg BSAE), whereas the apparent Michaelis constant for immobilized enzymes exhibited a statistically significant increase at P < 0.05 from the intrinsic value (2.55 ± 0.14 mM) for free enzyme to 5.38 ± 0.87 mM as Y_P/B increased to 171 mg BSAE/g ds. By estimating the observable Thiele modulus (?_obs), the activity of the biocatalyst with the greatest enzyme loading at the lowest urea concentrations tested (0.833 mM) was reduced by a factor of about 2 due to internal diffusional limitations. By operating in the pseudofirst‐order regime with immobilized derivatives at Y_P/B about 126 mg BSAE/g ds, their activity after grinding was no more limited by intraparticle diffusion and approached the value for free enzyme. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Comparison of angiotensin converting enzyme-like activity in the Antarctic teleosts <Emphasis Type="Italic">Trematomus bernacchii</Emphasis> and <Emphasis Type="Italic">Chionodraco hamatus</Emphasis>

Biochemical parameters of the angiotensin converting enzyme-like activity (ACELA) in the gills of two Antarctic teleosts, Chionodraco hamatus and Trematomus bernacchii were characterized. Enzymatic activity was revealed following hydrolysis of a specific substrate of angiotensin-converting enzyme N-[3-(2-furyl)acryloyl]l-phenylalanyl-glycyl-glycine (FAPGG) and metabolites were separated by reverse phase HPLC analysis. The results showed similar Km values for the substrate FAPGG at 5°C for the two species with an increase of Km value for T. bernacchii at 25°C. The optimum pH value was 8.5 at 25°C and optimum chloride concentrations were about 300 mM. In T. bernacchii the optimum temperature for maximum enzyme activity was 50°C, while maximum activity in C. hamatus occurred at 35°C. Lisinopril was more efficient in inhibiting ACELA in C. hamatus with an I ₅₀ value of 16.83 ± 5.11 nM, compared to an I ₅₀ value of 30.66 ± 5.19 nM in T. bernacchii. In conclusion, it appears that some biochemical parameters of ACELA in C. hamatus differ from those in T. bernacchii, probably due to different ways that the enzyme adapts to the constantly cold temperatures of the animal’s environment.     

Urease immobilized on an aminated polysulphone membrane – inhibition by boric acid

An enzymatic membrane for application in the processes of decomposition and removal of urea from aqueous solutions was prepared: jack bean urease was immobilized on an aminated polysulphone membrane by adsorption. The inhibition of the system by boric acid was studied using procedures based on the MICHAELIS-MENTEN integrated equation (non-linear regression, and the linear transformations of WALKER and SCHMIDT, JENNINGS and NIEMANN, and BOOMAN and NIEMANN). The reaction was carried out in a 100 mM phosphate buffer of pH 7.0, containing 2 mM EDTA, obtained by neutralization of orthophosphoric acid with NaOH, at an initial urea concentration of 10 mM, and a temperature of 25 °C. The reaction was initiated by the addition of the enzyme to the urea solution, and was monitored by removing samples of the reaction mixture for NH₃ determinations by the phenol-hypochlorite method until the urea was exhausted. The results were compared with those obtained earlier under the same reaction conditions for free urease and urease covalently immobilized on chitosan. The inhibition was found to be competitive, similar to that of the free enzyme and urease immobilized on chitosan, with inhibition constants K_i equal to 0.36, 0.19 and 0.60 mM. The results show that adsorption of the enzyme on a polysulphone membrane changed the enzyme to a lesser degree than covalent immobilization of the enzyme on a chitosan membrane.     

Characterization of microbial endo-β-glucanase immobilized in alginate beads

Endo-β-glucanase (endo-β-1,4-glucano-glucanase EC 3.2.1.4), isolated from Trichoderma reesei, was immobilized in calcium alginate beads, retaining 75% of its original activity. The polyanionic moiety surrounding the immobilized enzyme displaced the pH-activity profile to alkaline regions with respect to that of the free enzyme. The enzyme was inhibited by carboxymethylcellulose, but this inhibition appeared to be decreased by immobilizatíon. The enzyme immobilized in alginate beads showed a K_m value (1.02% w/v) lower than that of the enzyme (1.31%). The apparent V_max of immobilized cellulase preparations (238.3 μmol glucose/ml × h) decreased by a factor of 0.59 with respect to that of the soluble enzyme. The optimum temperature (60°C) of the free and entrapped enzymes remained unaltered. In contrast, the half-life of the endoglucanase immobilized in calciumalginate beads was 4.6 h at 55°C and 5.4 h at 60°C, while that of the free enzyme was 3.0 h at 55°C and 1.2 h at 60°C. A technological application of the immobilized enzymes was tested using wheat straw as a source of fermentable sugars. The hydrolytic degradation of straw, by means of a crude extract of free and immobilized cellulases and β-glucosidase, released a large amount of reducing sugars from wheat straw after 48 h (between 250–720 mg glucose/g straw), carrying out more than a 90% saccharification. A mixture of immobilized β-glucosidase and free cellulases maintained 80% of the activity of the soluble counterparts, and the co-immobilization of both types of enzymes reduced by hydrolytic efficiency to half.     

Urease from Arthrobacter oxydans,a nickel-containing enzyme

In Arthrobacter oxydans, Klebsiella aerogenes and Sporosarcina ureae, growth with urea as a nitrogen source turned out to be more sensitive to inhibition by EDTA than that with ammonia. The inhibition was overcome by added nickel chloride, but not by other divalent metal ions tested. In A. oxydans the uptake of ⁶³Ni was paralleled by an increase in urease (urea amidohydrolase, EC 3.5.1.5) activity under certain conditions. Following growth with radioactive nickel, urease from this strain was enriched by heat treatment and acetone fractionation. Copurification of ⁶³Ni and urease was observed during subsequent Sephadex gel chromatography. Almost the entire labelling was detected together with the purified enzyme after focusing on polyacrylamide gel. The relative molecular mass of the purified urease was estimated to be 242,000. The pH optimum was 7.6, the K _m-value 12.5 mmol/l and the temperature optimum 40°C; heat stability was observed up to 65°C. In presence of 10 mmol/l EDTA the protein-nickel binding remained intact at pH 7; at pH 5 and below, nickel was irreversibly removed with concommitant loss of enzyme activity. The results demonstrated that nickel ions are required for active urease formation in the bacterial strains studied, and that urease from A. oxydans is a nickel-containing enzyme.Dedicated to Professor Dr. H.-G. Schlegel on the occasion of his 60th birthday     

Immobilization of Xylan-Degrading Enzymes from Scytalidium thermophilum on Eudragit L-100

Summary Xylanase from Scytalidium thermophilum was immobilized on Eudragit L-100, a pH sensitive copolymer of methacrylic acid and methyl methacrylate. The enzyme was non-covalently immobilized and the system expressed 70% xylanase activity. The immobilized preparation had broader optimum temperature of activity between 55 and 65 °C as compared to 65 °C in case of free enzyme and broader optimum pH between 6.0 and 7.0 as compared to 6.5 in case of free enzyme. Immobilization increased the t_1/2 of enzyme at 60 °C from 15 to 30 min with a stabilization factor of 2. The K_m and V_max values for the immobilized and free xylanase were 0.5% xylan and 0.89 μmol/ml/min and 0.35% xylan and 1.01 μmol/ml/min respectively. An Arrhenius plot showed an increased value of activation energy for immobilized xylanase (227 kcal/mol) as compared to free xylanase (210 kcal/mol) confirming the higher temperature stability of the free enzyme. Enzymatic saccharification of xylan was also improved by xylanase immobilization.     

Stabilization of native and double <Emphasis Type="SmallCaps">d</Emphasis>-amino acid oxidases from <Emphasis Type="Italic">Rhodosporidium toruloides</Emphasis> and <Emphasis Type="Italic">Trigonopsis variabilis</Emphasis> by immobilization on streptavidin-coated magnetic beads

Double d-amino acid oxidases (dRtDAO and dTvDAO) were previously genetically constructed by linking the C-terminus of one subunit of their corresponding native DAOs from Rhodosporidium toruloides and Trigonopsis variabilis (RtDAO and TvDAO) to the N-terminus of the other identical subunit. We have now immobilized these double DAOs and their native counterparts onto streptavidin-coated magnetic beads through the interaction between biotin and streptavidin. The catalytic efficiencies (k_cat/K_M) of immobilized DAOs toward d-alanine and cepharosporin C remained similar to those of their soluble forms, except the catalytic efficiency of immobilized TvDAO toward d-alanine was decreased by 56%. After immobilization, the T_m value for RtDAO was shifted 15°C higher to 60°C, while those for dRtDAO, TvDAO and dTvDAO were increased by 5–8°C to 56, 60 and 60°C, respectively. In the presence of 10 mM H₂O₂, immobilized RtDAO, dRtDAO, TvDAO and dTvDAO exhibited half-lives of about 8, 10, 3 and 5 h, respectively, giving 16-, 10-, 6- and 7-fold greater stability than their soluble forms, respectively. Therefore, immobilization through biotin–streptavidin affinity binding enhances the thermal and oxidative stability of native and double DAOs studied, especially RtDAO. The additive stabilizing effect of subunit fusion and immobilization was more pronounced in the case of RtDAO than TvDAO.     

Immobilization of Bacillus licheniformis 5A1 milk-clotting enzyme and characterization of its enzyme properties

Milk-clotting enzyme from Bacillus licheniformis 5A1 was immobilized on Amberlite IR-120 by ionic binding. Almost all the enzyme activity was retained on the support. The immobilized milk-clotting enzyme was repeatedly used to produce cheese in a batch reactor. The production of cheese was repeated 5 times with no loss of activity. The specific activity calculated on a bound-protein basis was slightly higher than that of free enzyme. The free and immobilized enzyme were highly tolerant to repeated freezing and thawing. The optimum temperature for milk-clotting activity was 70 °C with the free enzyme whereas, it was ranged from 70 to 80 °C with the immobilized milk-clotting enzyme. The activation energy (E _A) of the immobilized milk-clotting enzyme was lower than the free enzyme (E _A = 1.59 and 1.99 Kcal mol⁻¹ respectively). The immobilized milk-clotting enzyme exhibited great thermal stability. The milk-clotting optimum pH was 7.0 for both free and immobilized enzyme. The Michaelis constant K _m of the immobilized milk-clotting enzyme was slightly lower than the free enzyme.     

Purification and partial characterization of thermostable serine alkaline protease from a newly isolated<Emphasis Type="Italic">Bacillus subtilis</Emphasis> PE-11

The purpose of the research was to study the purification and partial characterization of thermostable serine alkaline protease from a newly isolatedBacillus subtilis PE-11. The enzyme was purified in a 2-step procedure involving ammonium sulfate precipitation and Sephadex G-200 gel permeation chromatography. The enzyme was shown to have a relative low molecular weight of 15 kd by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and was purified 21-fold with a yield of 7.5%. It was most active at 60°C, pH 10, with casein as substrate. It was stable between pH 8 and 10. This enzyme was almost 100% stable at 60°C even after 350 minutes of incubation. It was strongly activated by metal ions such as Ca²⁺, Mg⁺², and Mn⁺². Enzyme activity was inhibited strongly by phenylmethyl sulphonyl fluoride (PMSF) and diisopropyl fluorophosphates (DFP) but was not inhibited by ethylene diamine tetra acetic acid (EDTA), while a slight inhibition was observed with iodoacetate,p-chloromercuric benzoate (pCMB), and β-mercaptoethanol (β-ME). The compatibility of the enzyme was studied with commercial and local detergents in the presence of 10mM CaCl₂ and 1M glycine. The addition of 10mM CaCl₂ and 1M glycine, individually and in combination, was found to be very effective in improving the enzyme stability where it retained 52% activity even after 3 hours. This enzyme improved the cleansing power of various detergents. It removed blood stains completely when used with detergents in the presence of 10mM CaCl₂ and 1M glycine.     

Immobilization imparts stability to watermelon urease to work in water miscible organic media

The behaviour of alginate immobilized and soluble watermelon (Citrullus vulgaris) urease in water miscible organic solvents like, acetonitrile, dimethylformamide (DMF), ethanol, methanol, and propanol is described. The organic solvents exhibited a concentration dependent inhibitory effect on both the immobilized and the soluble urease in the presence of urea. Pretreatment of soluble enzyme preparations with organic solvents in the absence of substrate for 10 min at 30°C led to rapid loss in the activity, while similar pretreatment of immobilized urease with 50% (v/v) of ethanol, propanol, and acetonitrile was ineffective. Time-dependent inactivation of immobilized urease, both in the presence and in the absence of urea, revealed stability for longer duration of time even at very high concentration of organic solvents. The soluble enzyme, on the other hand, was rapidly inactivated even at fairly lower concentrations. The results suggest that the immobilization of watermelon urease in calcium alginate make it suitable for its application in organic media. the observations are discussed.     

Overexpression and characterization of thermostable serine protease in Escherichia coli encoded by the ORF TTE0824 from Thermoanaerobacter tengcongensis

A novel extracellular serine protease derived from Thermoanaerobacter tengcongensis, designated tengconlysin, was successfully overexpressed in Escherichia coli as a soluble protein by recombination of an N-terminal Pel B leader sequence instead of the original presequence and C-terminal 6× histidine tags. The purified protein was activated by 0.1% sodium dodecyl sulfate (SDS) treatment but not by thermal treatment. The molecular weight of tengconlysin estimated by SDS-polyacrylamide gel electrophoresis analysis and gel filtration chromatography was 37.9 and 36.2 kDa, respectively, suggesting that the enzyme is monomeric. The N-terminal sequence of mature tengconlysin was LDTAT, suggesting that it is a preproprotein containing a 29 amino acid presequence (predicted from the SigP program) and a 117 amino acid prosequence in the N-terminus. The C-terminal putative propeptide (position 469–540 in the preproprotein) did not inhibit the protease activity. The optimum temperature for tengconlysin activity was 90°C in the presence of 1 mM calcium ions and the optimum pH ranged from 6.5 to 7.0. Activity inhibition studies suggest that the protease is a serine protease. The protease was stable in 0.1% SDS and 1–4 M urea at 70°C in the presence of calcium ions and was activated by the denaturing agents.     

Purification and characterization of veratryl alcohol oxidase from Comamonas sp. UVS and its role in decolorization of textile dyes

In the present work, we have purified veratryl alcohol oxidase (VAO) enzyme from Comamonas UVS to evaluate its potential to decolorize textile dyes. VAO was purified (13.9 fold) by an ion exchange followed by the size exclusion chromatography. Molecular weight of the VAO was estimated to be about 66 kDa by SDS-PAGE. The optimum pH and temperature of oxidase were 30°C and 65°C, respectively. VAO showed maximum activity with n-propanol among the various substrates (n-propanol, veratryl alcohol, L-dopa, tryptophan, etc.). Under standard assay conditions, K_m value of the enzyme was 2.5 mM towards veratrole. The enzyme activity was completely inhibited by 0.5 mM sodium azide. L-cysteine, dithiothreitol, and the metal chelator, EDTA had a slight inhibitory effect. The purified enzyme was able to decolorize textile dyes, Red HE7B (57.5%) and Direct Blue GLL (51.09%) within 15 h at 40 μg/mL concentration. GC-MS analysis of the metabolites suggested oxidative cleavage and desulphonation of these dyes.     

Characterization of BflI – A Thermostable,Co++-Requiring Isoschizomer of BsiYI from Anoxybacillus Flavithermus

A thermophile, isolated from geothermal areas in the northern Himalayan region of India, was identified by partial 16S rDNA sequence (GenBank accession # AF482430) analysis as Anoxybacillus flavithermus. The isolate produced BflI (REBASE # 4910), a Type II restriction endonuclease, which recognized the sequence 5′-CCNNNNN/NNGG-3′ and was the isoschizomer of BsiYI. The enzyme was purified to homogeneity by passing through Cibacron Blue F3GA agarose, DEAE-cellulose, heparin-agarose and MonoQ FPLC. The purified enzyme (MW 36 kDa) worked best at 60 °C in Promega's buffer C and preferentially required Co⁺⁺(0.4 mM) as cofactor followed by Mg⁺⁺(10 mM) and Mn⁺⁺(1 mM). The enzyme showed high specific activity and worked in the presence of high concentrations of β-mercaptoethanol (200 mM), Triton-X-100 (25%), urea (30%), formamide (6%) and guanidine (40 mM) and showed no star activity in the presence of 40% glycerol. In the absence of any stabilizing agent, BflI retained t _1/2 for at least 96 h at 37 °C, 6 h at 60 °C and 6 months at 4 °C. N-terminal sequencing showed that its first 10 amino acid residues were DFHEDKTIAR. This revised version was published online in July 2006 with corrections to the Cover Date.     

Studies on the <Emphasis Type="Italic">Pycnoporus sanguineus</Emphasis> CCT-4518 laccase purified by hydrophobic interaction chromatography

A laccase from Pycnoporus sanguineus was purified by two steps using phenyl-Sepharose columm. A typical procedure provided 54.1-fold purification, with a yield of 8.37%, using syringaldazine as substrate. The molecular weight of the purified laccase was 69 and 68 kDa as estimated by 12% (w/v) SDS-PAGE gel and by gel filtration, respectively. The K _m values for the substrates ABTS, syringaldazine, and guaiacol were 58, 8.3, and 370 μM, respectively. The enzyme’s pH optimum for syringaldazine was 4.2 and optimal activity was 50°C. The enzyme showed to be thermostable because when kept at 50°C for 24 and 48 h it retained 93 and 76% activity. This laccase was inhibited by l-cysteine, β-mercaptoethanol, NaN₃, NaF, and HgCl₂.