Discovery of a sugar-based nanoparticle universally existing in boiling herbal water extracts and their immunostimulant effect

Herbal medicine is mainly prepared from boiling herbal water extracts. Many epoch-making immunosuppressant drugs, such as glycyrrhizic acid (old example) and FTY720 (current example), were developed from herbal secondary metabolites in the boiling water extract by partition with organic solvents. However, few immunostimulants have been discovered by this method. Instead of the usual method, we aimed to find a novel immunostimulant component by two unique methods in the research of herbal medicine: ultracentrifugation and electron microscopy. The immunostimulant was not a secondary metabolite, as expected, but the structure was a nanoparticle formed by a polysaccharide. In addition, we clarified the immune effect of the nanoparticle. Intake of the nanoparticle by phagocytosis resulted in immunostimulant effects by increasing the genes and proteins of inflammatory cytokines in macrophage cells. The immunostimulant effects were inhibited by a phagocytosis inhibitor, cytochalasin D. To the best of our knowledge, this study is the first to describe the discovery of a nanoparticle in boiling herbal water extracts and its immunostimulant properties. This study will provide additional understanding of the efficacy of herbal medicine, in that the immunostimulant nanoparticle universally exists in boiling herbal water extracts. Thus, traditional herbal medicine may be an oldest known nanomedicine. Furthermore, this study suggests that the immunostimulant nanoparticle simply can be obtained from herbal medicine only by ultracentrifugation. We hope that this simple strategy will substantially contribute to drug development, including vaccine adjuvant, in the future.     

中药提取物对酵母菌抗真菌活性研究

目的探讨6味中药2种方法提取成分对酵母菌的抑菌和杀菌作用。方法采用药基琼脂稀释法,测定6味中药水提和醇提成分对白念珠菌和糠秕马拉色菌的MIC和MFC。结果对白念珠菌：水提黄连、醇提黄柏、醇提土槿皮MIC范围分别为0．625—1．25mg／mL、0．625～1．25mg/mL、0．313—0．625mg／mL;均值均为0．625mg／mL;对糠秕马拉色菌：水提和醇提黄连MIC范围分别为0．625～1．25mg／mL和1．25mg／mL,均值均为1．25mg／mL。对白念珠菌：醇提土槿皮MFC范围0．625～2．5mg/mL,均值0．625rag／mL。结论水提黄连、醇提黄柏和土槿皮对白念珠菌有较强抑菌作用,其中醇提土槿皮有较强杀菌作用。水提和醇提黄连对糠秕马拉色菌有较强抑菌作用。     

Design and in vitro and in vivo evaluation of mucoadhesive microcapsules of glipizide for oral controlled release: A technical note

Conclussion  Thus, large spherical microcapsules with a coat consisting of alginate and a mucoadhesive polymer (sodium CMC, methylcellulose, Carbopol, or HPMC) could be prepared by an orifice-ionic gelation process. The microcapsules exhibited good mucoadhesive properties in an in vitro test. Glipizide release from these mucoadhesive microcapsules was slow and extended over longer periods of time and depended on composition of the coat. Drug release was diffusion controlled and followed zero-order kinetics after a lag, period of 1 hour. In the in vivo evaluation, alginate-Carbopol microcapsules could sustain the hypoglycemic effect of glipizide over a 14-hour period. These mucoadhesive microcapsules are, thus, suitable for oral controlled release of glipizide.     

壳聚糖作为药物缓释控释载体的研究进展

壳聚糖因其具有良好的生物学特性而成为多种药物载体研究的热点。药物经过壳聚糖负载后,不仅能够达到缓释控释的目的,还能够改变药物的给药方式,以此减少给药次数,降低药物不良反应,提高药物生物利用度。本文就壳聚糖和改性壳聚糖作为普通药物和生物大分子药物载体的研究进展作一综述。     

Inhibition of SNARE-driven neuroexocytosis by plant extracts

Neuronal soluble N-ethylmaleimide-sensitive factor attachment protein (SNAP) receptor (SNARE) proteins mediate membrane fusion between synaptic vesicle and presynaptic membrane, resulting in neurotransmitter release. SNARE proteins are specific substrates of botulinum neurotoxins (BoNT) which are now widely used for therapeutic and cosmetic purposes. While BoNT blocks neuroexocytosis by cleaving SNAREs, inhibiting SNARE assembly process might exert the same effect on neurotransmission. In the present study, some extracts of 100 plants reduced neurotransmitter release by inhibiting SNARE complex formation in neuronal cells. The extracts effectively paralyzed muscle of rat phrenic nerve-hemidiaphragm preparation. Our results raise the possibility that SNARE folding inhibitors from natural resources might replace some special BoNT application fields. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Chang Hwa Jung and Yoo Soo Yang equally contributed to this work.     

载药脂质体的研究与应用进展

载药脂质体给药系统已成为国内外的研究热点。传统脂质体经修饰和改良后表现出良好的生物相容性,缓释性和靶向性。新型脂质体在经皮给药,肺部给药,脑部靶向治疗,基因治疗等方面的应用研究结果显示,集药物缓释、靶向于一体的具有良好生物安全性的脂质体给药系统具有很大发展潜力。本文综述了该领域中的最新研究进展。     

Biocompatible controlled release polymers for delivery of polypeptides and growth factors

The development of biocompatible, controlled release systems for macromolecules has provided the opportunity for researchers and clinicians to target and deliver, on site, biologically active factors. This advance has also facilitated the purification and characterization of a number of important biomolecules. These systems include controlled release delivery systems which release proteins through porous polymer matrices, degradable polymeric delivery systems, and modulated polymer release systems. These areas of research will be reviewed with regards to their design, release kinetics, and biocompatibilities. The utilization of these systems to release such biologically important polypeptides as growth factors (e.g., fibroblast growth factor, epidermal growth factor, transforming growth factor-B) as well as a number of important inhibitory factors (e.g., nitrosoureas, angiogenesis inhibitors) in both in vivo and in vitro studies will be discussed.     

Preparation and in vitro evaluation of polystyrene-coated diltiazem-resin complex by oil-in-water emulsion solvent evaporation method

The purpose of this study was to examine the suitability of polystyrene-coated (PS-coated) microcapsules of drug-resin complex for achieving prolonged release of diltiazem-HCl, a highly water-soluble drug, in simulated gastric and intestinal fluid. The drug was bound to Indion 254, a cation-exchange resin, and the resulting resinate was microencapsulated with PS using an oil-in-water emulsion-solvent evaporation method. The effect of various formulation parameters on the characteristics of the microcapsules was studied. Mean diameter and encapsulation efficiency of the microcapsules rose with an increase in the concentration of emulsion stabilizer and the coat/core ratio, while the same characteristics tended to decrease with an increase in the volume of the organic disperse phase. The desorption of drug from the uncoated resinate was quite rapid and independent of the pH of the dissolution media. On the other hand, the drug release from the microcapsules was prolonged for different periods of time depending on the formulation parameters and was also found to be independent of the pH of the dissolution media. Both the encapsulation efficiency and the retardation of drug release were found to be dependent on the uniformity of coating, which in turn was influenced by the formulation parameters. Kinetic studies revealed that the desorption of drug from the resinate obeyed the typical particle diffusion process, whereas the drug release from the microencapsulated resinate followed the diffusion-controlled model in accordance with the Higuchi equation. PS appeared to be a suitable polymer to provide prolonged release of diltiazem independent of the pH of the dissolution media.     

Validation of a capillary electrophoresis method for the quantitative determination of free and total apigenin in extracts of Chamomilla recutita

A capillary electrophoretic method for the quantification of free and total apigenin in methanolic, ethanolic and glycolic extracts of Chamomilla recutita L. Rauschert (Asteraceae) is described. The method was validated for measurement of apigenin in the range 5.00-300 microg/mL (r2 = 0.993) and showed coefficients of intra-day (replicability) and inter-day (repeatability) variability of better than 2%. The limits of detection and quantification were 3.80 and 11.5 microg/mL, respectively, and the average recovery was 102.0 +/- 0.8% at three concentration levels of apigenin. Free and total apigenin contents in the extracts were, respectively, determined as 106 and 903 microg/g (methanolic extract), 77 and 817 microg/g (ethanolic extract) and 11.0 and 247 microg/g (glycolic extract).     

Gastroretentive drug delivery system of ranitidine hydrochloride: Formulation and in vitro evaluation

The purpose of this research was to prepare a gastroretentive drug delivery system of ranitidine hydrochloride. Guar gum, xanthan gum, and hydroxypropyl methylcellulose were evaluated for gel-forming properties. Sodium bicarbonate was incorporated as a gas-generating agent. The effects of citric acid and stearic acid on drug release profile and floating properties were investigated. The addition of stearic acid reduces the drug dissolution due to its hydrophobic nature. A 3² full factorial design was applied to systemically optimize the drug release profile. The amounts of citric acid anhydrous (X₁) and stearic acid (X₂) were selected as independent variables. The times required for 50% (t₅₀) and 80% drug dissolution (t₈₀), and the similarity factor f₂ were selected as dependent variables. The results of the full factorial design indicated that a low amount of citric acid and a high amount of stearic acid favors sustained release of ranitidine hydrochloride from a gastroretentive formulation. A theoretical dissolution profile was generated using pharmacokinetic parameters of ranitidine hydrochloride. The similarity factor f₂ was applied between the factorial design batches and the theoretical dissolution profile. No significant difference was observed between the desired release profile and batches F2, F3, F6, and F9. Batch F9 showed the highest f2 (f2=75) among all the batches, and this similarity is also reflected in t₅₀ (∼214 minutes) and t₈₀ (∼537 minutes) values. These studies indicate that the proper balance between a release rate enhancer and a release rate retardant can produce a drug dissolution profile similar to a theoretical dissolution profile.     

Co-lyophilization of bovine serum albumin (BSA) with poly(ethylene glycol) improves efficiency of BSA encapsulation and stability in polyester microspheres by a solid-in-oil-in-oil technique

The effect of the co-lyophilization of bovine serum albumin (BSA) with poly(ethylene glycol) (PEG) on the BSA encapsulation efficiency and formation of soluble BSA aggregates upon solid-in-oil-in-oil (s/o/o) encapsulation in poly(lactic-co-glycolic) acid (PLGA) microspheres was investigated. Suspension of the lyophilized BSA-PEG formulations in methylene chloride produced small protein powder particles of less than 1 m diam. and this afforded high encapsulation efficiencies of typically 90% ameliorating one of the problems in s/o/o encapsulation. Formation of soluble BSA aggregates upon s/o/o encapsulation followed by 24 h in vitro release was between 5% and 22%, much lower than values of 59% reported for BSA without stabilizing excipients. Therefore, PEG also afforded BSA stabilization during s/o/o encapsulation. Sustained release occurred over ca. 2 months and was complete.     

Leishmania donovani: assessment of leishmanicidal effects of herbal extracts obtained from plants in the visceral leishmaniasis endemic area of Bihar, India

One obstacle faced in the effective control of visceral leishmaniasis (VL) is the limited number of available treatment options. Furthermore, control efforts have been hindered further by the emergence of Leishmania resistance to many of the available drugs. In this study, we investigated the anti-leishmanial properties of 30 medicinally important plants from the VL endemic area of Bihar, India and compared them to two available anti-leishmanial drugs (sodium antimony gluconate and amphotericin B) and two plant lectins (phytohemagglutinin and concanavalin A) on Leishmania donovani promastigotes in vitro at 24 and 48 h after initiation of culture. We identified eight plant extracts in addition to phytohemagglutinin and amphotericin B that significantly inhibited the growth of promastigotes (p < 0.03). We further studied the minimum effective concentrations as well as the effect on axenic amastigotes viability and the cell cytotoxicity on human peripheral blood of four (Agave americana, Azadirachta indica, Eclipta alba and Piper longum) of the eight plant extracts that induced significant promastigotes killing (p = 0.00098). Effect-based dose finding analysis revealed that the threshold concentration of A. americana required to eliminate L. donovani after 24 h was 0.05 mg/ml. A. indica and P. longum plant extracts eliminated L. donovani promastigotes after 48 h at concentrations of 0.1 and 0.5 mg/ml, respectively. E. alba eliminated the promastigotes at a concentration of 0.5 mg/ml within 24 h. The axenic amastigote killing response was 1.90-, 2.52- and 1.3-fold higher than the promastigote killing response with A. indica, A. americana and E. alba plant extracts, respectively. A. americana and A. indica, respectively, led to approximate 2.5- and 1.3-fold declines in mitochondrial dehydrogenase activity compared with control. E. alba stimulation resulted in an up-regulation of dehydrogenase activity (p = 0.00329). The CSA from P. longum was found to be least cytotoxic; the observed difference in mitochondrial activity was insignificant (p = 0.16314). Further studies may reveal the pharmacological significance of many of the plants with anti-leishmanial properties identified in the present study.     

Once-daily tablet formulation and in vitro release evaluation of cefpodoxime using hydroxypropyl methylcellulose: A technical note

Summary and Conclusions  Decreasing the dose frequency of cefpodoxime proxetil increases patient compliance; patients prefer to take the drug once daily. It also improves the rate of bacterial killing and hastens the cure from the indications, and therefore increases compliance. The hydrophilic matrix of HPMC controlled the cefpodoxime proxetil release effectively for 24 hours; hence, the formulation can be considered as a once-daily sustained-release tablet of cefpodoxime proxetil. The formulation showed acceptable pharmacotechnical properties and assay requirements. In vitro dissolution studies indicated a sustained-release pattern throughout 24 hours of the study that was comparable to the theoretical release profile. Drug release kinetics indicated that drug release was best explained by Higuchi’s equation, as these plots showed the highest linearity (r ²=0.9734), but a close relationship was also noted with zero-order kinetics (r ²=0.9708). Korsmeyer’s plots indicated ann value of 0.57, which was indicative of an anomalous diffusion mechanism or diffusion coupled with erosion; hence, the drug release was controlled by more than one process. Hixson-Crowell plots indicated a change in surface area and diameter of the tablets with the progressive dissolution of the matrix as a function of time. Published: September 22, 2006